]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - drivers/block/paride/pd.c
block: introduce new block status code type
[mirror_ubuntu-bionic-kernel.git] / drivers / block / paride / pd.c
1 /*
2 pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
4
5 This is the high-level driver for parallel port IDE hard
6 drives based on chips supported by the paride module.
7
8 By default, the driver will autoprobe for a single parallel
9 port IDE drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
11
12 The behaviour of the pd driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
15
16 drive0 These four arguments can be arrays of
17 drive1 1-8 integers as follows:
18 drive2
19 drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
20
21 Where,
22
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
25
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
30
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
35 (0 if not given)
36
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
39 (-1 if not given)
40
41 <geo> this defaults to 0 to indicate that the driver
42 should use the CHS geometry provided by the drive
43 itself. If set to 1, the driver will provide
44 a logical geometry with 64 heads and 32 sectors
45 per track, to be consistent with most SCSI
46 drivers. (0 if not given)
47
48 <sby> set this to zero to disable the power saving
49 standby mode, if needed. (1 if not given)
50
51 <dly> some parallel ports require the driver to
52 go more slowly. -1 sets a default value that
53 should work with the chosen protocol. Otherwise,
54 set this to a small integer, the larger it is
55 the slower the port i/o. In some cases, setting
56 this to zero will speed up the device. (default -1)
57
58 <slv> IDE disks can be jumpered to master or slave.
59 Set this to 0 to choose the master drive, 1 to
60 choose the slave, -1 (the default) to choose the
61 first drive found.
62
63
64 major You may use this parameter to override the
65 default major number (45) that this driver
66 will use. Be sure to change the device
67 name as well.
68
69 name This parameter is a character string that
70 contains the name the kernel will use for this
71 device (in /proc output, for instance).
72 (default "pd")
73
74 cluster The driver will attempt to aggregate requests
75 for adjacent blocks into larger multi-block
76 clusters. The maximum cluster size (in 512
77 byte sectors) is set with this parameter.
78 (default 64)
79
80 verbose This parameter controls the amount of logging
81 that the driver will do. Set it to 0 for
82 normal operation, 1 to see autoprobe progress
83 messages, or 2 to see additional debugging
84 output. (default 0)
85
86 nice This parameter controls the driver's use of
87 idle CPU time, at the expense of some speed.
88
89 If this driver is built into the kernel, you can use kernel
90 the following command line parameters, with the same values
91 as the corresponding module parameters listed above:
92
93 pd.drive0
94 pd.drive1
95 pd.drive2
96 pd.drive3
97 pd.cluster
98 pd.nice
99
100 In addition, you can use the parameter pd.disable to disable
101 the driver entirely.
102
103 */
104
105 /* Changes:
106
107 1.01 GRG 1997.01.24 Restored pd_reset()
108 Added eject ioctl
109 1.02 GRG 1998.05.06 SMP spinlock changes,
110 Added slave support
111 1.03 GRG 1998.06.16 Eliminate an Ugh.
112 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
113 1.05 GRG 1998.09.24 Added jumbo support
114
115 */
116
117 #define PD_VERSION "1.05"
118 #define PD_MAJOR 45
119 #define PD_NAME "pd"
120 #define PD_UNITS 4
121
122 /* Here are things one can override from the insmod command.
123 Most are autoprobed by paride unless set here. Verbose is off
124 by default.
125
126 */
127 #include <linux/types.h>
128
129 static int verbose = 0;
130 static int major = PD_MAJOR;
131 static char *name = PD_NAME;
132 static int cluster = 64;
133 static int nice = 0;
134 static int disable = 0;
135
136 static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
137 static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
138 static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
139 static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
140
141 static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3};
142
143 enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
144
145 /* end of parameters */
146
147 #include <linux/init.h>
148 #include <linux/module.h>
149 #include <linux/gfp.h>
150 #include <linux/fs.h>
151 #include <linux/delay.h>
152 #include <linux/hdreg.h>
153 #include <linux/cdrom.h> /* for the eject ioctl */
154 #include <linux/blkdev.h>
155 #include <linux/blkpg.h>
156 #include <linux/kernel.h>
157 #include <linux/mutex.h>
158 #include <linux/uaccess.h>
159 #include <linux/workqueue.h>
160
161 static DEFINE_MUTEX(pd_mutex);
162 static DEFINE_SPINLOCK(pd_lock);
163
164 module_param(verbose, int, 0);
165 module_param(major, int, 0);
166 module_param(name, charp, 0);
167 module_param(cluster, int, 0);
168 module_param(nice, int, 0);
169 module_param_array(drive0, int, NULL, 0);
170 module_param_array(drive1, int, NULL, 0);
171 module_param_array(drive2, int, NULL, 0);
172 module_param_array(drive3, int, NULL, 0);
173
174 #include "paride.h"
175
176 #define PD_BITS 4
177
178 /* numbers for "SCSI" geometry */
179
180 #define PD_LOG_HEADS 64
181 #define PD_LOG_SECTS 32
182
183 #define PD_ID_OFF 54
184 #define PD_ID_LEN 14
185
186 #define PD_MAX_RETRIES 5
187 #define PD_TMO 800 /* interrupt timeout in jiffies */
188 #define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
189
190 #define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
191
192 #define STAT_ERR 0x00001
193 #define STAT_INDEX 0x00002
194 #define STAT_ECC 0x00004
195 #define STAT_DRQ 0x00008
196 #define STAT_SEEK 0x00010
197 #define STAT_WRERR 0x00020
198 #define STAT_READY 0x00040
199 #define STAT_BUSY 0x00080
200
201 #define ERR_AMNF 0x00100
202 #define ERR_TK0NF 0x00200
203 #define ERR_ABRT 0x00400
204 #define ERR_MCR 0x00800
205 #define ERR_IDNF 0x01000
206 #define ERR_MC 0x02000
207 #define ERR_UNC 0x04000
208 #define ERR_TMO 0x10000
209
210 #define IDE_READ 0x20
211 #define IDE_WRITE 0x30
212 #define IDE_READ_VRFY 0x40
213 #define IDE_INIT_DEV_PARMS 0x91
214 #define IDE_STANDBY 0x96
215 #define IDE_ACKCHANGE 0xdb
216 #define IDE_DOORLOCK 0xde
217 #define IDE_DOORUNLOCK 0xdf
218 #define IDE_IDENTIFY 0xec
219 #define IDE_EJECT 0xed
220
221 #define PD_NAMELEN 8
222
223 struct pd_unit {
224 struct pi_adapter pia; /* interface to paride layer */
225 struct pi_adapter *pi;
226 int access; /* count of active opens ... */
227 int capacity; /* Size of this volume in sectors */
228 int heads; /* physical geometry */
229 int sectors;
230 int cylinders;
231 int can_lba;
232 int drive; /* master=0 slave=1 */
233 int changed; /* Have we seen a disk change ? */
234 int removable; /* removable media device ? */
235 int standby;
236 int alt_geom;
237 char name[PD_NAMELEN]; /* pda, pdb, etc ... */
238 struct gendisk *gd;
239 };
240
241 static struct pd_unit pd[PD_UNITS];
242
243 static char pd_scratch[512]; /* scratch block buffer */
244
245 static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
246 "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
247 "IDNF", "MC", "UNC", "???", "TMO"
248 };
249
250 static void *par_drv; /* reference of parport driver */
251
252 static inline int status_reg(struct pd_unit *disk)
253 {
254 return pi_read_regr(disk->pi, 1, 6);
255 }
256
257 static inline int read_reg(struct pd_unit *disk, int reg)
258 {
259 return pi_read_regr(disk->pi, 0, reg);
260 }
261
262 static inline void write_status(struct pd_unit *disk, int val)
263 {
264 pi_write_regr(disk->pi, 1, 6, val);
265 }
266
267 static inline void write_reg(struct pd_unit *disk, int reg, int val)
268 {
269 pi_write_regr(disk->pi, 0, reg, val);
270 }
271
272 static inline u8 DRIVE(struct pd_unit *disk)
273 {
274 return 0xa0+0x10*disk->drive;
275 }
276
277 /* ide command interface */
278
279 static void pd_print_error(struct pd_unit *disk, char *msg, int status)
280 {
281 int i;
282
283 printk("%s: %s: status = 0x%x =", disk->name, msg, status);
284 for (i = 0; i < ARRAY_SIZE(pd_errs); i++)
285 if (status & (1 << i))
286 printk(" %s", pd_errs[i]);
287 printk("\n");
288 }
289
290 static void pd_reset(struct pd_unit *disk)
291 { /* called only for MASTER drive */
292 write_status(disk, 4);
293 udelay(50);
294 write_status(disk, 0);
295 udelay(250);
296 }
297
298 #define DBMSG(msg) ((verbose>1)?(msg):NULL)
299
300 static int pd_wait_for(struct pd_unit *disk, int w, char *msg)
301 { /* polled wait */
302 int k, r, e;
303
304 k = 0;
305 while (k < PD_SPIN) {
306 r = status_reg(disk);
307 k++;
308 if (((r & w) == w) && !(r & STAT_BUSY))
309 break;
310 udelay(PD_SPIN_DEL);
311 }
312 e = (read_reg(disk, 1) << 8) + read_reg(disk, 7);
313 if (k >= PD_SPIN)
314 e |= ERR_TMO;
315 if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL))
316 pd_print_error(disk, msg, e);
317 return e;
318 }
319
320 static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func)
321 {
322 write_reg(disk, 6, DRIVE(disk) + h);
323 write_reg(disk, 1, 0); /* the IDE task file */
324 write_reg(disk, 2, n);
325 write_reg(disk, 3, s);
326 write_reg(disk, 4, c0);
327 write_reg(disk, 5, c1);
328 write_reg(disk, 7, func);
329
330 udelay(1);
331 }
332
333 static void pd_ide_command(struct pd_unit *disk, int func, int block, int count)
334 {
335 int c1, c0, h, s;
336
337 if (disk->can_lba) {
338 s = block & 255;
339 c0 = (block >>= 8) & 255;
340 c1 = (block >>= 8) & 255;
341 h = ((block >>= 8) & 15) + 0x40;
342 } else {
343 s = (block % disk->sectors) + 1;
344 h = (block /= disk->sectors) % disk->heads;
345 c0 = (block /= disk->heads) % 256;
346 c1 = (block >>= 8);
347 }
348 pd_send_command(disk, count, s, h, c0, c1, func);
349 }
350
351 /* The i/o request engine */
352
353 enum action {Fail = 0, Ok = 1, Hold, Wait};
354
355 static struct request *pd_req; /* current request */
356 static enum action (*phase)(void);
357
358 static void run_fsm(void);
359
360 static void ps_tq_int(struct work_struct *work);
361
362 static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int);
363
364 static void schedule_fsm(void)
365 {
366 if (!nice)
367 schedule_delayed_work(&fsm_tq, 0);
368 else
369 schedule_delayed_work(&fsm_tq, nice-1);
370 }
371
372 static void ps_tq_int(struct work_struct *work)
373 {
374 run_fsm();
375 }
376
377 static enum action do_pd_io_start(void);
378 static enum action pd_special(void);
379 static enum action do_pd_read_start(void);
380 static enum action do_pd_write_start(void);
381 static enum action do_pd_read_drq(void);
382 static enum action do_pd_write_done(void);
383
384 static int pd_queue;
385 static int pd_claimed;
386
387 static struct pd_unit *pd_current; /* current request's drive */
388 static PIA *pi_current; /* current request's PIA */
389
390 static int set_next_request(void)
391 {
392 struct gendisk *disk;
393 struct request_queue *q;
394 int old_pos = pd_queue;
395
396 do {
397 disk = pd[pd_queue].gd;
398 q = disk ? disk->queue : NULL;
399 if (++pd_queue == PD_UNITS)
400 pd_queue = 0;
401 if (q) {
402 pd_req = blk_fetch_request(q);
403 if (pd_req)
404 break;
405 }
406 } while (pd_queue != old_pos);
407
408 return pd_req != NULL;
409 }
410
411 static void run_fsm(void)
412 {
413 while (1) {
414 enum action res;
415 unsigned long saved_flags;
416 int stop = 0;
417
418 if (!phase) {
419 pd_current = pd_req->rq_disk->private_data;
420 pi_current = pd_current->pi;
421 phase = do_pd_io_start;
422 }
423
424 switch (pd_claimed) {
425 case 0:
426 pd_claimed = 1;
427 if (!pi_schedule_claimed(pi_current, run_fsm))
428 return;
429 case 1:
430 pd_claimed = 2;
431 pi_current->proto->connect(pi_current);
432 }
433
434 switch(res = phase()) {
435 case Ok: case Fail:
436 pi_disconnect(pi_current);
437 pd_claimed = 0;
438 phase = NULL;
439 spin_lock_irqsave(&pd_lock, saved_flags);
440 if (!__blk_end_request_cur(pd_req,
441 res == Ok ? 0 : BLK_STS_IOERR)) {
442 if (!set_next_request())
443 stop = 1;
444 }
445 spin_unlock_irqrestore(&pd_lock, saved_flags);
446 if (stop)
447 return;
448 case Hold:
449 schedule_fsm();
450 return;
451 case Wait:
452 pi_disconnect(pi_current);
453 pd_claimed = 0;
454 }
455 }
456 }
457
458 static int pd_retries = 0; /* i/o error retry count */
459 static int pd_block; /* address of next requested block */
460 static int pd_count; /* number of blocks still to do */
461 static int pd_run; /* sectors in current cluster */
462 static char *pd_buf; /* buffer for request in progress */
463
464 static enum action do_pd_io_start(void)
465 {
466 switch (req_op(pd_req)) {
467 case REQ_OP_DRV_IN:
468 phase = pd_special;
469 return pd_special();
470 case REQ_OP_READ:
471 case REQ_OP_WRITE:
472 pd_block = blk_rq_pos(pd_req);
473 pd_count = blk_rq_cur_sectors(pd_req);
474 if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
475 return Fail;
476 pd_run = blk_rq_sectors(pd_req);
477 pd_buf = bio_data(pd_req->bio);
478 pd_retries = 0;
479 if (req_op(pd_req) == REQ_OP_READ)
480 return do_pd_read_start();
481 else
482 return do_pd_write_start();
483 }
484 return Fail;
485 }
486
487 static enum action pd_special(void)
488 {
489 enum action (*func)(struct pd_unit *) = pd_req->special;
490 return func(pd_current);
491 }
492
493 static int pd_next_buf(void)
494 {
495 unsigned long saved_flags;
496
497 pd_count--;
498 pd_run--;
499 pd_buf += 512;
500 pd_block++;
501 if (!pd_run)
502 return 1;
503 if (pd_count)
504 return 0;
505 spin_lock_irqsave(&pd_lock, saved_flags);
506 __blk_end_request_cur(pd_req, 0);
507 pd_count = blk_rq_cur_sectors(pd_req);
508 pd_buf = bio_data(pd_req->bio);
509 spin_unlock_irqrestore(&pd_lock, saved_flags);
510 return 0;
511 }
512
513 static unsigned long pd_timeout;
514
515 static enum action do_pd_read_start(void)
516 {
517 if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) {
518 if (pd_retries < PD_MAX_RETRIES) {
519 pd_retries++;
520 return Wait;
521 }
522 return Fail;
523 }
524 pd_ide_command(pd_current, IDE_READ, pd_block, pd_run);
525 phase = do_pd_read_drq;
526 pd_timeout = jiffies + PD_TMO;
527 return Hold;
528 }
529
530 static enum action do_pd_write_start(void)
531 {
532 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) {
533 if (pd_retries < PD_MAX_RETRIES) {
534 pd_retries++;
535 return Wait;
536 }
537 return Fail;
538 }
539 pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run);
540 while (1) {
541 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) {
542 if (pd_retries < PD_MAX_RETRIES) {
543 pd_retries++;
544 return Wait;
545 }
546 return Fail;
547 }
548 pi_write_block(pd_current->pi, pd_buf, 512);
549 if (pd_next_buf())
550 break;
551 }
552 phase = do_pd_write_done;
553 pd_timeout = jiffies + PD_TMO;
554 return Hold;
555 }
556
557 static inline int pd_ready(void)
558 {
559 return !(status_reg(pd_current) & STAT_BUSY);
560 }
561
562 static enum action do_pd_read_drq(void)
563 {
564 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
565 return Hold;
566
567 while (1) {
568 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) {
569 if (pd_retries < PD_MAX_RETRIES) {
570 pd_retries++;
571 phase = do_pd_read_start;
572 return Wait;
573 }
574 return Fail;
575 }
576 pi_read_block(pd_current->pi, pd_buf, 512);
577 if (pd_next_buf())
578 break;
579 }
580 return Ok;
581 }
582
583 static enum action do_pd_write_done(void)
584 {
585 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
586 return Hold;
587
588 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) {
589 if (pd_retries < PD_MAX_RETRIES) {
590 pd_retries++;
591 phase = do_pd_write_start;
592 return Wait;
593 }
594 return Fail;
595 }
596 return Ok;
597 }
598
599 /* special io requests */
600
601 /* According to the ATA standard, the default CHS geometry should be
602 available following a reset. Some Western Digital drives come up
603 in a mode where only LBA addresses are accepted until the device
604 parameters are initialised.
605 */
606
607 static void pd_init_dev_parms(struct pd_unit *disk)
608 {
609 pd_wait_for(disk, 0, DBMSG("before init_dev_parms"));
610 pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0,
611 IDE_INIT_DEV_PARMS);
612 udelay(300);
613 pd_wait_for(disk, 0, "Initialise device parameters");
614 }
615
616 static enum action pd_door_lock(struct pd_unit *disk)
617 {
618 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
619 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK);
620 pd_wait_for(disk, STAT_READY, "Lock done");
621 }
622 return Ok;
623 }
624
625 static enum action pd_door_unlock(struct pd_unit *disk)
626 {
627 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
628 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
629 pd_wait_for(disk, STAT_READY, "Lock done");
630 }
631 return Ok;
632 }
633
634 static enum action pd_eject(struct pd_unit *disk)
635 {
636 pd_wait_for(disk, 0, DBMSG("before unlock on eject"));
637 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
638 pd_wait_for(disk, 0, DBMSG("after unlock on eject"));
639 pd_wait_for(disk, 0, DBMSG("before eject"));
640 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT);
641 pd_wait_for(disk, 0, DBMSG("after eject"));
642 return Ok;
643 }
644
645 static enum action pd_media_check(struct pd_unit *disk)
646 {
647 int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check"));
648 if (!(r & STAT_ERR)) {
649 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
650 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY"));
651 } else
652 disk->changed = 1; /* say changed if other error */
653 if (r & ERR_MC) {
654 disk->changed = 1;
655 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE);
656 pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE"));
657 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
658 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY"));
659 }
660 return Ok;
661 }
662
663 static void pd_standby_off(struct pd_unit *disk)
664 {
665 pd_wait_for(disk, 0, DBMSG("before STANDBY"));
666 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY);
667 pd_wait_for(disk, 0, DBMSG("after STANDBY"));
668 }
669
670 static enum action pd_identify(struct pd_unit *disk)
671 {
672 int j;
673 char id[PD_ID_LEN + 1];
674
675 /* WARNING: here there may be dragons. reset() applies to both drives,
676 but we call it only on probing the MASTER. This should allow most
677 common configurations to work, but be warned that a reset can clear
678 settings on the SLAVE drive.
679 */
680
681 if (disk->drive == 0)
682 pd_reset(disk);
683
684 write_reg(disk, 6, DRIVE(disk));
685 pd_wait_for(disk, 0, DBMSG("before IDENT"));
686 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY);
687
688 if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR)
689 return Fail;
690 pi_read_block(disk->pi, pd_scratch, 512);
691 disk->can_lba = pd_scratch[99] & 2;
692 disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12));
693 disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6));
694 disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2));
695 if (disk->can_lba)
696 disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120));
697 else
698 disk->capacity = disk->sectors * disk->heads * disk->cylinders;
699
700 for (j = 0; j < PD_ID_LEN; j++)
701 id[j ^ 1] = pd_scratch[j + PD_ID_OFF];
702 j = PD_ID_LEN - 1;
703 while ((j >= 0) && (id[j] <= 0x20))
704 j--;
705 j++;
706 id[j] = 0;
707
708 disk->removable = pd_scratch[0] & 0x80;
709
710 printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
711 disk->name, id,
712 disk->drive ? "slave" : "master",
713 disk->capacity, disk->capacity / 2048,
714 disk->cylinders, disk->heads, disk->sectors,
715 disk->removable ? "removable" : "fixed");
716
717 if (disk->capacity)
718 pd_init_dev_parms(disk);
719 if (!disk->standby)
720 pd_standby_off(disk);
721
722 return Ok;
723 }
724
725 /* end of io request engine */
726
727 static void do_pd_request(struct request_queue * q)
728 {
729 if (pd_req)
730 return;
731 pd_req = blk_fetch_request(q);
732 if (!pd_req)
733 return;
734
735 schedule_fsm();
736 }
737
738 static int pd_special_command(struct pd_unit *disk,
739 enum action (*func)(struct pd_unit *disk))
740 {
741 struct request *rq;
742
743 rq = blk_get_request(disk->gd->queue, REQ_OP_DRV_IN, __GFP_RECLAIM);
744 if (IS_ERR(rq))
745 return PTR_ERR(rq);
746
747 rq->special = func;
748 blk_execute_rq(disk->gd->queue, disk->gd, rq, 0);
749 blk_put_request(rq);
750 return 0;
751 }
752
753 /* kernel glue structures */
754
755 static int pd_open(struct block_device *bdev, fmode_t mode)
756 {
757 struct pd_unit *disk = bdev->bd_disk->private_data;
758
759 mutex_lock(&pd_mutex);
760 disk->access++;
761
762 if (disk->removable) {
763 pd_special_command(disk, pd_media_check);
764 pd_special_command(disk, pd_door_lock);
765 }
766 mutex_unlock(&pd_mutex);
767 return 0;
768 }
769
770 static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
771 {
772 struct pd_unit *disk = bdev->bd_disk->private_data;
773
774 if (disk->alt_geom) {
775 geo->heads = PD_LOG_HEADS;
776 geo->sectors = PD_LOG_SECTS;
777 geo->cylinders = disk->capacity / (geo->heads * geo->sectors);
778 } else {
779 geo->heads = disk->heads;
780 geo->sectors = disk->sectors;
781 geo->cylinders = disk->cylinders;
782 }
783
784 return 0;
785 }
786
787 static int pd_ioctl(struct block_device *bdev, fmode_t mode,
788 unsigned int cmd, unsigned long arg)
789 {
790 struct pd_unit *disk = bdev->bd_disk->private_data;
791
792 switch (cmd) {
793 case CDROMEJECT:
794 mutex_lock(&pd_mutex);
795 if (disk->access == 1)
796 pd_special_command(disk, pd_eject);
797 mutex_unlock(&pd_mutex);
798 return 0;
799 default:
800 return -EINVAL;
801 }
802 }
803
804 static void pd_release(struct gendisk *p, fmode_t mode)
805 {
806 struct pd_unit *disk = p->private_data;
807
808 mutex_lock(&pd_mutex);
809 if (!--disk->access && disk->removable)
810 pd_special_command(disk, pd_door_unlock);
811 mutex_unlock(&pd_mutex);
812 }
813
814 static unsigned int pd_check_events(struct gendisk *p, unsigned int clearing)
815 {
816 struct pd_unit *disk = p->private_data;
817 int r;
818 if (!disk->removable)
819 return 0;
820 pd_special_command(disk, pd_media_check);
821 r = disk->changed;
822 disk->changed = 0;
823 return r ? DISK_EVENT_MEDIA_CHANGE : 0;
824 }
825
826 static int pd_revalidate(struct gendisk *p)
827 {
828 struct pd_unit *disk = p->private_data;
829 if (pd_special_command(disk, pd_identify) == 0)
830 set_capacity(p, disk->capacity);
831 else
832 set_capacity(p, 0);
833 return 0;
834 }
835
836 static const struct block_device_operations pd_fops = {
837 .owner = THIS_MODULE,
838 .open = pd_open,
839 .release = pd_release,
840 .ioctl = pd_ioctl,
841 .getgeo = pd_getgeo,
842 .check_events = pd_check_events,
843 .revalidate_disk= pd_revalidate
844 };
845
846 /* probing */
847
848 static void pd_probe_drive(struct pd_unit *disk)
849 {
850 struct gendisk *p = alloc_disk(1 << PD_BITS);
851 if (!p)
852 return;
853 strcpy(p->disk_name, disk->name);
854 p->fops = &pd_fops;
855 p->major = major;
856 p->first_minor = (disk - pd) << PD_BITS;
857 disk->gd = p;
858 p->private_data = disk;
859 p->queue = blk_init_queue(do_pd_request, &pd_lock);
860 if (!p->queue) {
861 disk->gd = NULL;
862 put_disk(p);
863 return;
864 }
865 blk_queue_max_hw_sectors(p->queue, cluster);
866
867 if (disk->drive == -1) {
868 for (disk->drive = 0; disk->drive <= 1; disk->drive++)
869 if (pd_special_command(disk, pd_identify) == 0)
870 return;
871 } else if (pd_special_command(disk, pd_identify) == 0)
872 return;
873 disk->gd = NULL;
874 put_disk(p);
875 }
876
877 static int pd_detect(void)
878 {
879 int found = 0, unit, pd_drive_count = 0;
880 struct pd_unit *disk;
881
882 for (unit = 0; unit < PD_UNITS; unit++) {
883 int *parm = *drives[unit];
884 struct pd_unit *disk = pd + unit;
885 disk->pi = &disk->pia;
886 disk->access = 0;
887 disk->changed = 1;
888 disk->capacity = 0;
889 disk->drive = parm[D_SLV];
890 snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit);
891 disk->alt_geom = parm[D_GEO];
892 disk->standby = parm[D_SBY];
893 if (parm[D_PRT])
894 pd_drive_count++;
895 }
896
897 par_drv = pi_register_driver(name);
898 if (!par_drv) {
899 pr_err("failed to register %s driver\n", name);
900 return -1;
901 }
902
903 if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
904 disk = pd;
905 if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch,
906 PI_PD, verbose, disk->name)) {
907 pd_probe_drive(disk);
908 if (!disk->gd)
909 pi_release(disk->pi);
910 }
911
912 } else {
913 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
914 int *parm = *drives[unit];
915 if (!parm[D_PRT])
916 continue;
917 if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD],
918 parm[D_UNI], parm[D_PRO], parm[D_DLY],
919 pd_scratch, PI_PD, verbose, disk->name)) {
920 pd_probe_drive(disk);
921 if (!disk->gd)
922 pi_release(disk->pi);
923 }
924 }
925 }
926 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
927 if (disk->gd) {
928 set_capacity(disk->gd, disk->capacity);
929 add_disk(disk->gd);
930 found = 1;
931 }
932 }
933 if (!found) {
934 printk("%s: no valid drive found\n", name);
935 pi_unregister_driver(par_drv);
936 }
937 return found;
938 }
939
940 static int __init pd_init(void)
941 {
942 if (disable)
943 goto out1;
944
945 if (register_blkdev(major, name))
946 goto out1;
947
948 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
949 name, name, PD_VERSION, major, cluster, nice);
950 if (!pd_detect())
951 goto out2;
952
953 return 0;
954
955 out2:
956 unregister_blkdev(major, name);
957 out1:
958 return -ENODEV;
959 }
960
961 static void __exit pd_exit(void)
962 {
963 struct pd_unit *disk;
964 int unit;
965 unregister_blkdev(major, name);
966 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
967 struct gendisk *p = disk->gd;
968 if (p) {
969 disk->gd = NULL;
970 del_gendisk(p);
971 blk_cleanup_queue(p->queue);
972 put_disk(p);
973 pi_release(disk->pi);
974 }
975 }
976 }
977
978 MODULE_LICENSE("GPL");
979 module_init(pd_init)
980 module_exit(pd_exit)