drivers/block/skd_s1120.h

   1 /*
   2  * Copyright 2012 STEC, Inc.
   3  * Copyright (c) 2017 Western Digital Corporation or its affiliates.
   4  *
   5  * This file is part of the Linux kernel, and is made available under
   6  * the terms of the GNU General Public License version 2.
   7  */
   8
   9
  10 #ifndef SKD_S1120_H
  11 #define SKD_S1120_H
  12
  13 #pragma pack(push, s1120_h, 1)
  14
  15 /*
  16  * Q-channel, 64-bit r/w
  17  */
  18 #define FIT_Q_COMMAND                   0x400u
  19 #define FIT_QCMD_QID_MASK               (0x3 << 1)
  20 #define  FIT_QCMD_QID0                  (0x0 << 1)
  21 #define  FIT_QCMD_QID_NORMAL            FIT_QCMD_QID0
  22 #define  FIT_QCMD_QID1                  (0x1 << 1)
  23 #define  FIT_QCMD_QID2                  (0x2 << 1)
  24 #define  FIT_QCMD_QID3                  (0x3 << 1)
  25 #define  FIT_QCMD_FLUSH_QUEUE           (0ull)  /* add QID */
  26 #define  FIT_QCMD_MSGSIZE_MASK          (0x3 << 4)
  27 #define  FIT_QCMD_MSGSIZE_64            (0x0 << 4)
  28 #define  FIT_QCMD_MSGSIZE_128           (0x1 << 4)
  29 #define  FIT_QCMD_MSGSIZE_256           (0x2 << 4)
  30 #define  FIT_QCMD_MSGSIZE_512           (0x3 << 4)
  31 #define  FIT_QCMD_ALIGN                 L1_CACHE_BYTES
  32
  33 /*
  34  * Control, 32-bit r/w
  35  */
  36 #define FIT_CONTROL                     0x500u
  37 #define  FIT_CR_HARD_RESET              (1u << 0u)
  38 #define  FIT_CR_SOFT_RESET              (1u << 1u)
  39 #define  FIT_CR_DIS_TIMESTAMPS          (1u << 6u)
  40 #define  FIT_CR_ENABLE_INTERRUPTS       (1u << 7u)
  41
  42 /*
  43  * Status, 32-bit, r/o
  44  */
  45 #define FIT_STATUS                      0x510u
  46 #define FIT_SR_DRIVE_STATE_MASK         0x000000FFu
  47 #define FIT_SR_SIGNATURE                (0xFF << 8)
  48 #define FIT_SR_PIO_DMA                  (1 << 16)
  49 #define FIT_SR_DRIVE_OFFLINE            0x00
  50 #define FIT_SR_DRIVE_INIT               0x01
  51 /* #define FIT_SR_DRIVE_READY           0x02 */
  52 #define FIT_SR_DRIVE_ONLINE             0x03
  53 #define FIT_SR_DRIVE_BUSY               0x04
  54 #define FIT_SR_DRIVE_FAULT              0x05
  55 #define FIT_SR_DRIVE_DEGRADED           0x06
  56 #define FIT_SR_PCIE_LINK_DOWN           0x07
  57 #define FIT_SR_DRIVE_SOFT_RESET         0x08
  58 #define FIT_SR_DRIVE_INIT_FAULT         0x09
  59 #define FIT_SR_DRIVE_BUSY_SANITIZE      0x0A
  60 #define FIT_SR_DRIVE_BUSY_ERASE         0x0B
  61 #define FIT_SR_DRIVE_FW_BOOTING         0x0C
  62 #define FIT_SR_DRIVE_NEED_FW_DOWNLOAD   0xFE
  63 #define FIT_SR_DEVICE_MISSING           0xFF
  64 #define FIT_SR__RESERVED                0xFFFFFF00u
  65
  66 /*
  67  * FIT_STATUS - Status register data definition
  68  */
  69 #define FIT_SR_STATE_MASK               (0xFF << 0)
  70 #define FIT_SR_SIGNATURE                (0xFF << 8)
  71 #define FIT_SR_PIO_DMA                  (1 << 16)
  72
  73 /*
  74  * Interrupt status, 32-bit r/w1c (w1c ==> write 1 to clear)
  75  */
  76 #define FIT_INT_STATUS_HOST             0x520u
  77 #define  FIT_ISH_FW_STATE_CHANGE        (1u << 0u)
  78 #define  FIT_ISH_COMPLETION_POSTED      (1u << 1u)
  79 #define  FIT_ISH_MSG_FROM_DEV           (1u << 2u)
  80 #define  FIT_ISH_UNDEFINED_3            (1u << 3u)
  81 #define  FIT_ISH_UNDEFINED_4            (1u << 4u)
  82 #define  FIT_ISH_Q0_FULL                (1u << 5u)
  83 #define  FIT_ISH_Q1_FULL                (1u << 6u)
  84 #define  FIT_ISH_Q2_FULL                (1u << 7u)
  85 #define  FIT_ISH_Q3_FULL                (1u << 8u)
  86 #define  FIT_ISH_QCMD_FIFO_OVERRUN      (1u << 9u)
  87 #define  FIT_ISH_BAD_EXP_ROM_READ       (1u << 10u)
  88
  89 #define FIT_INT_DEF_MASK \
  90         (FIT_ISH_FW_STATE_CHANGE | \
  91          FIT_ISH_COMPLETION_POSTED | \
  92          FIT_ISH_MSG_FROM_DEV | \
  93          FIT_ISH_Q0_FULL | \
  94          FIT_ISH_Q1_FULL | \
  95          FIT_ISH_Q2_FULL | \
  96          FIT_ISH_Q3_FULL | \
  97          FIT_ISH_QCMD_FIFO_OVERRUN | \
  98          FIT_ISH_BAD_EXP_ROM_READ)
  99
 100 #define FIT_INT_QUEUE_FULL \
 101         (FIT_ISH_Q0_FULL | \
 102          FIT_ISH_Q1_FULL | \
 103          FIT_ISH_Q2_FULL | \
 104          FIT_ISH_Q3_FULL)
 105
 106 #define MSI_MSG_NWL_ERROR_0             0x00000000
 107 #define MSI_MSG_NWL_ERROR_1             0x00000001
 108 #define MSI_MSG_NWL_ERROR_2             0x00000002
 109 #define MSI_MSG_NWL_ERROR_3             0x00000003
 110 #define MSI_MSG_STATE_CHANGE            0x00000004
 111 #define MSI_MSG_COMPLETION_POSTED       0x00000005
 112 #define MSI_MSG_MSG_FROM_DEV            0x00000006
 113 #define MSI_MSG_RESERVED_0              0x00000007
 114 #define MSI_MSG_RESERVED_1              0x00000008
 115 #define MSI_MSG_QUEUE_0_FULL            0x00000009
 116 #define MSI_MSG_QUEUE_1_FULL            0x0000000A
 117 #define MSI_MSG_QUEUE_2_FULL            0x0000000B
 118 #define MSI_MSG_QUEUE_3_FULL            0x0000000C
 119
 120 #define FIT_INT_RESERVED_MASK \
 121         (FIT_ISH_UNDEFINED_3 | \
 122          FIT_ISH_UNDEFINED_4)
 123
 124 /*
 125  * Interrupt mask, 32-bit r/w
 126  * Bit definitions are the same as FIT_INT_STATUS_HOST
 127  */
 128 #define FIT_INT_MASK_HOST               0x528u
 129
 130 /*
 131  * Message to device, 32-bit r/w
 132  */
 133 #define FIT_MSG_TO_DEVICE               0x540u
 134
 135 /*
 136  * Message from device, 32-bit, r/o
 137  */
 138 #define FIT_MSG_FROM_DEVICE             0x548u
 139
 140 /*
 141  * 32-bit messages to/from device, composition/extraction macros
 142  */
 143 #define FIT_MXD_CONS(TYPE, PARAM, DATA) \
 144         ((((TYPE)  & 0xFFu) << 24u) | \
 145         (((PARAM) & 0xFFu) << 16u) | \
 146         (((DATA)  & 0xFFFFu) << 0u))
 147 #define FIT_MXD_TYPE(MXD)               (((MXD) >> 24u) & 0xFFu)
 148 #define FIT_MXD_PARAM(MXD)              (((MXD) >> 16u) & 0xFFu)
 149 #define FIT_MXD_DATA(MXD)               (((MXD) >> 0u) & 0xFFFFu)
 150
 151 /*
 152  * Types of messages to/from device
 153  */
 154 #define FIT_MTD_FITFW_INIT              0x01u
 155 #define FIT_MTD_GET_CMDQ_DEPTH          0x02u
 156 #define FIT_MTD_SET_COMPQ_DEPTH         0x03u
 157 #define FIT_MTD_SET_COMPQ_ADDR          0x04u
 158 #define FIT_MTD_ARM_QUEUE               0x05u
 159 #define FIT_MTD_CMD_LOG_HOST_ID         0x07u
 160 #define FIT_MTD_CMD_LOG_TIME_STAMP_LO   0x08u
 161 #define FIT_MTD_CMD_LOG_TIME_STAMP_HI   0x09u
 162 #define FIT_MFD_SMART_EXCEEDED          0x10u
 163 #define FIT_MFD_POWER_DOWN              0x11u
 164 #define FIT_MFD_OFFLINE                 0x12u
 165 #define FIT_MFD_ONLINE                  0x13u
 166 #define FIT_MFD_FW_RESTARTING           0x14u
 167 #define FIT_MFD_PM_ACTIVE               0x15u
 168 #define FIT_MFD_PM_STANDBY              0x16u
 169 #define FIT_MFD_PM_SLEEP                0x17u
 170 #define FIT_MFD_CMD_PROGRESS            0x18u
 171
 172 #define FIT_MTD_DEBUG                   0xFEu
 173 #define FIT_MFD_DEBUG                   0xFFu
 174
 175 #define FIT_MFD_MASK                    (0xFFu)
 176 #define FIT_MFD_DATA_MASK               (0xFFu)
 177 #define FIT_MFD_MSG(x)                  (((x) >> 24) & FIT_MFD_MASK)
 178 #define FIT_MFD_DATA(x)                 ((x) & FIT_MFD_MASK)
 179
 180 /*
 181  * Extra arg to FIT_MSG_TO_DEVICE, 64-bit r/w
 182  * Used to set completion queue address (FIT_MTD_SET_COMPQ_ADDR)
 183  * (was Response buffer in docs)
 184  */
 185 #define FIT_MSG_TO_DEVICE_ARG           0x580u
 186
 187 /*
 188  * Hardware (ASIC) version, 32-bit r/o
 189  */
 190 #define FIT_HW_VERSION                  0x588u
 191
 192 /*
 193  * Scatter/gather list descriptor.
 194  * 32-bytes and must be aligned on a 32-byte boundary.
 195  * All fields are in little endian order.
 196  */
 197 struct fit_sg_descriptor {
 198         uint32_t control;
 199         uint32_t byte_count;
 200         uint64_t host_side_addr;
 201         uint64_t dev_side_addr;
 202         uint64_t next_desc_ptr;
 203 };
 204
 205 #define FIT_SGD_CONTROL_NOT_LAST        0x000u
 206 #define FIT_SGD_CONTROL_LAST            0x40Eu
 207
 208 /*
 209  * Header at the beginning of a FIT message. The header
 210  * is followed by SSDI requests each 64 bytes.
 211  * A FIT message can be up to 512 bytes long and must start
 212  * on a 64-byte boundary.
 213  */
 214 struct fit_msg_hdr {
 215         uint8_t protocol_id;
 216         uint8_t num_protocol_cmds_coalesced;
 217         uint8_t _reserved[62];
 218 };
 219
 220 #define FIT_PROTOCOL_ID_FIT     1
 221 #define FIT_PROTOCOL_ID_SSDI    2
 222 #define FIT_PROTOCOL_ID_SOFIT   3
 223
 224
 225 #define FIT_PROTOCOL_MINOR_VER(mtd_val) ((mtd_val >> 16) & 0xF)
 226 #define FIT_PROTOCOL_MAJOR_VER(mtd_val) ((mtd_val >> 20) & 0xF)
 227
 228 /*
 229  * Format of a completion entry. The completion queue is circular
 230  * and must have at least as many entries as the maximum number
 231  * of commands that may be issued to the device.
 232  *
 233  * There are no head/tail pointers. The cycle value is used to
 234  * infer the presence of new completion records.
 235  * Initially the cycle in all entries is 0, the index is 0, and
 236  * the cycle value to expect is 1. When completions are added
 237  * their cycle values are set to 1. When the index wraps the
 238  * cycle value to expect is incremented.
 239  *
 240  * Command_context is opaque and taken verbatim from the SSDI command.
 241  * All other fields are big endian.
 242  */
 243 #define FIT_PROTOCOL_VERSION_0          0
 244
 245 /*
 246  *  Protocol major version 1 completion entry.
 247  *  The major protocol version is found in bits
 248  *  20-23 of the FIT_MTD_FITFW_INIT response.
 249  */
 250 struct fit_completion_entry_v1 {
 251         __be32          num_returned_bytes;
 252         uint16_t        tag;
 253         uint8_t         status;  /* SCSI status */
 254         uint8_t         cycle;
 255 };
 256 #define FIT_PROTOCOL_VERSION_1          1
 257 #define FIT_PROTOCOL_VERSION_CURRENT    FIT_PROTOCOL_VERSION_1
 258
 259 struct fit_comp_error_info {
 260         uint8_t         type:7; /* 00: Bits0-6 indicates the type of sense data. */
 261         uint8_t         valid:1; /* 00: Bit 7 := 1 ==> info field is valid. */
 262         uint8_t         reserved0; /* 01: Obsolete field */
 263         uint8_t         key:4; /* 02: Bits0-3 indicate the sense key. */
 264         uint8_t         reserved2:1; /* 02: Reserved bit. */
 265         uint8_t         bad_length:1; /* 02: Incorrect Length Indicator */
 266         uint8_t         end_medium:1; /* 02: End of Medium */
 267         uint8_t         file_mark:1; /* 02: Filemark */
 268         uint8_t         info[4]; /* 03: */
 269         uint8_t         reserved1; /* 07: Additional Sense Length */
 270         uint8_t         cmd_spec[4]; /* 08: Command Specific Information */
 271         uint8_t         code; /* 0C: Additional Sense Code */
 272         uint8_t         qual; /* 0D: Additional Sense Code Qualifier */
 273         uint8_t         fruc; /* 0E: Field Replaceable Unit Code */
 274         uint8_t         sks_high:7; /* 0F: Sense Key Specific (MSB) */
 275         uint8_t         sks_valid:1; /* 0F: Sense Key Specific Valid */
 276         uint16_t        sks_low; /* 10: Sense Key Specific (LSW) */
 277         uint16_t        reserved3; /* 12: Part of additional sense bytes (unused) */
 278         uint16_t        uec; /* 14: Additional Sense Bytes */
 279         uint64_t        per; /* 16: Additional Sense Bytes */
 280         uint8_t         reserved4[2]; /* 1E: Additional Sense Bytes (unused) */
 281 };
 282
 283
 284 /* Task management constants */
 285 #define SOFT_TASK_SIMPLE                0x00
 286 #define SOFT_TASK_HEAD_OF_QUEUE         0x01
 287 #define SOFT_TASK_ORDERED               0x02
 288
 289 /* Version zero has the last 32 bits reserved,
 290  * Version one has the last 32 bits sg_list_len_bytes;
 291  */
 292 struct skd_command_header {
 293         __be64          sg_list_dma_address;
 294         uint16_t        tag;
 295         uint8_t         attribute;
 296         uint8_t         add_cdb_len;     /* In 32 bit words */
 297         __be32          sg_list_len_bytes;
 298 };
 299
 300 struct skd_scsi_request {
 301         struct          skd_command_header hdr;
 302         unsigned char   cdb[16];
 303 /*      unsigned char _reserved[16]; */
 304 };
 305
 306 struct driver_inquiry_data {
 307         uint8_t         peripheral_device_type:5;
 308         uint8_t         qualifier:3;
 309         uint8_t         page_code;
 310         __be16          page_length;
 311         __be16          pcie_bus_number;
 312         uint8_t         pcie_device_number;
 313         uint8_t         pcie_function_number;
 314         uint8_t         pcie_link_speed;
 315         uint8_t         pcie_link_lanes;
 316         __be16          pcie_vendor_id;
 317         __be16          pcie_device_id;
 318         __be16          pcie_subsystem_vendor_id;
 319         __be16          pcie_subsystem_device_id;
 320         uint8_t         reserved1[2];
 321         uint8_t         reserved2[3];
 322         uint8_t         driver_version_length;
 323         uint8_t         driver_version[0x14];
 324 };
 325
 326 #pragma pack(pop, s1120_h)
 327
 328 #endif /* SKD_S1120_H */