3 * Generic Bluetooth USB driver
5 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/module.h>
25 #include <linux/usb.h>
26 #include <linux/firmware.h>
28 #include <net/bluetooth/bluetooth.h>
29 #include <net/bluetooth/hci_core.h>
33 static bool disable_scofix
;
34 static bool force_scofix
;
36 static bool reset
= 1;
38 static struct usb_driver btusb_driver
;
40 #define BTUSB_IGNORE 0x01
41 #define BTUSB_DIGIANSWER 0x02
42 #define BTUSB_CSR 0x04
43 #define BTUSB_SNIFFER 0x08
44 #define BTUSB_BCM92035 0x10
45 #define BTUSB_BROKEN_ISOC 0x20
46 #define BTUSB_WRONG_SCO_MTU 0x40
47 #define BTUSB_ATH3012 0x80
48 #define BTUSB_INTEL 0x100
49 #define BTUSB_INTEL_BOOT 0x200
50 #define BTUSB_BCM_PATCHRAM 0x400
51 #define BTUSB_MARVELL 0x800
52 #define BTUSB_SWAVE 0x1000
53 #define BTUSB_INTEL_NEW 0x2000
54 #define BTUSB_AMP 0x4000
55 #define BTUSB_QCA_ROME 0x8000
57 static const struct usb_device_id btusb_table
[] = {
58 /* Generic Bluetooth USB device */
59 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
61 /* Generic Bluetooth AMP device */
62 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info
= BTUSB_AMP
},
64 /* Apple-specific (Broadcom) devices */
65 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
67 /* MediaTek MT76x0E */
68 { USB_DEVICE(0x0e8d, 0x763f) },
70 /* Broadcom SoftSailing reporting vendor specific */
71 { USB_DEVICE(0x0a5c, 0x21e1) },
73 /* Apple MacBookPro 7,1 */
74 { USB_DEVICE(0x05ac, 0x8213) },
77 { USB_DEVICE(0x05ac, 0x8215) },
79 /* Apple MacBookPro6,2 */
80 { USB_DEVICE(0x05ac, 0x8218) },
82 /* Apple MacBookAir3,1, MacBookAir3,2 */
83 { USB_DEVICE(0x05ac, 0x821b) },
85 /* Apple MacBookAir4,1 */
86 { USB_DEVICE(0x05ac, 0x821f) },
88 /* Apple MacBookPro8,2 */
89 { USB_DEVICE(0x05ac, 0x821a) },
91 /* Apple MacMini5,1 */
92 { USB_DEVICE(0x05ac, 0x8281) },
94 /* AVM BlueFRITZ! USB v2.0 */
95 { USB_DEVICE(0x057c, 0x3800), .driver_info
= BTUSB_SWAVE
},
97 /* Bluetooth Ultraport Module from IBM */
98 { USB_DEVICE(0x04bf, 0x030a) },
100 /* ALPS Modules with non-standard id */
101 { USB_DEVICE(0x044e, 0x3001) },
102 { USB_DEVICE(0x044e, 0x3002) },
104 /* Ericsson with non-standard id */
105 { USB_DEVICE(0x0bdb, 0x1002) },
107 /* Canyon CN-BTU1 with HID interfaces */
108 { USB_DEVICE(0x0c10, 0x0000) },
110 /* Broadcom BCM20702A0 */
111 { USB_DEVICE(0x0489, 0xe042) },
112 { USB_DEVICE(0x04ca, 0x2003) },
113 { USB_DEVICE(0x0b05, 0x17b5) },
114 { USB_DEVICE(0x0b05, 0x17cb) },
115 { USB_DEVICE(0x413c, 0x8197) },
116 { USB_DEVICE(0x13d3, 0x3404),
117 .driver_info
= BTUSB_BCM_PATCHRAM
},
119 /* Broadcom BCM20702B0 (Dynex/Insignia) */
120 { USB_DEVICE(0x19ff, 0x0239), .driver_info
= BTUSB_BCM_PATCHRAM
},
122 /* Foxconn - Hon Hai */
123 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
124 .driver_info
= BTUSB_BCM_PATCHRAM
},
126 /* Lite-On Technology - Broadcom based */
127 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
128 .driver_info
= BTUSB_BCM_PATCHRAM
},
130 /* Broadcom devices with vendor specific id */
131 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
132 .driver_info
= BTUSB_BCM_PATCHRAM
},
134 /* ASUSTek Computer - Broadcom based */
135 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
136 .driver_info
= BTUSB_BCM_PATCHRAM
},
138 /* Belkin F8065bf - Broadcom based */
139 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) },
141 /* IMC Networks - Broadcom based */
142 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01) },
144 /* Intel Bluetooth USB Bootloader (RAM module) */
145 { USB_DEVICE(0x8087, 0x0a5a),
146 .driver_info
= BTUSB_INTEL_BOOT
| BTUSB_BROKEN_ISOC
},
148 { } /* Terminating entry */
151 MODULE_DEVICE_TABLE(usb
, btusb_table
);
153 static const struct usb_device_id blacklist_table
[] = {
154 /* CSR BlueCore devices */
155 { USB_DEVICE(0x0a12, 0x0001), .driver_info
= BTUSB_CSR
},
157 /* Broadcom BCM2033 without firmware */
158 { USB_DEVICE(0x0a5c, 0x2033), .driver_info
= BTUSB_IGNORE
},
160 /* Atheros 3011 with sflash firmware */
161 { USB_DEVICE(0x0489, 0xe027), .driver_info
= BTUSB_IGNORE
},
162 { USB_DEVICE(0x0489, 0xe03d), .driver_info
= BTUSB_IGNORE
},
163 { USB_DEVICE(0x04f2, 0xaff1), .driver_info
= BTUSB_IGNORE
},
164 { USB_DEVICE(0x0930, 0x0215), .driver_info
= BTUSB_IGNORE
},
165 { USB_DEVICE(0x0cf3, 0x3002), .driver_info
= BTUSB_IGNORE
},
166 { USB_DEVICE(0x0cf3, 0xe019), .driver_info
= BTUSB_IGNORE
},
167 { USB_DEVICE(0x13d3, 0x3304), .driver_info
= BTUSB_IGNORE
},
169 /* Atheros AR9285 Malbec with sflash firmware */
170 { USB_DEVICE(0x03f0, 0x311d), .driver_info
= BTUSB_IGNORE
},
172 /* Atheros 3012 with sflash firmware */
173 { USB_DEVICE(0x0489, 0xe04d), .driver_info
= BTUSB_ATH3012
},
174 { USB_DEVICE(0x0489, 0xe04e), .driver_info
= BTUSB_ATH3012
},
175 { USB_DEVICE(0x0489, 0xe056), .driver_info
= BTUSB_ATH3012
},
176 { USB_DEVICE(0x0489, 0xe057), .driver_info
= BTUSB_ATH3012
},
177 { USB_DEVICE(0x0489, 0xe05f), .driver_info
= BTUSB_ATH3012
},
178 { USB_DEVICE(0x0489, 0xe078), .driver_info
= BTUSB_ATH3012
},
179 { USB_DEVICE(0x04c5, 0x1330), .driver_info
= BTUSB_ATH3012
},
180 { USB_DEVICE(0x04ca, 0x3004), .driver_info
= BTUSB_ATH3012
},
181 { USB_DEVICE(0x04ca, 0x3005), .driver_info
= BTUSB_ATH3012
},
182 { USB_DEVICE(0x04ca, 0x3006), .driver_info
= BTUSB_ATH3012
},
183 { USB_DEVICE(0x04ca, 0x3007), .driver_info
= BTUSB_ATH3012
},
184 { USB_DEVICE(0x04ca, 0x3008), .driver_info
= BTUSB_ATH3012
},
185 { USB_DEVICE(0x04ca, 0x300b), .driver_info
= BTUSB_ATH3012
},
186 { USB_DEVICE(0x04ca, 0x3010), .driver_info
= BTUSB_ATH3012
},
187 { USB_DEVICE(0x0930, 0x0219), .driver_info
= BTUSB_ATH3012
},
188 { USB_DEVICE(0x0930, 0x0220), .driver_info
= BTUSB_ATH3012
},
189 { USB_DEVICE(0x0930, 0x0227), .driver_info
= BTUSB_ATH3012
},
190 { USB_DEVICE(0x0b05, 0x17d0), .driver_info
= BTUSB_ATH3012
},
191 { USB_DEVICE(0x0cf3, 0x0036), .driver_info
= BTUSB_ATH3012
},
192 { USB_DEVICE(0x0cf3, 0x3004), .driver_info
= BTUSB_ATH3012
},
193 { USB_DEVICE(0x0cf3, 0x3008), .driver_info
= BTUSB_ATH3012
},
194 { USB_DEVICE(0x0cf3, 0x311d), .driver_info
= BTUSB_ATH3012
},
195 { USB_DEVICE(0x0cf3, 0x311e), .driver_info
= BTUSB_ATH3012
},
196 { USB_DEVICE(0x0cf3, 0x311f), .driver_info
= BTUSB_ATH3012
},
197 { USB_DEVICE(0x0cf3, 0x3121), .driver_info
= BTUSB_ATH3012
},
198 { USB_DEVICE(0x0cf3, 0x817a), .driver_info
= BTUSB_ATH3012
},
199 { USB_DEVICE(0x0cf3, 0xe003), .driver_info
= BTUSB_ATH3012
},
200 { USB_DEVICE(0x0cf3, 0xe004), .driver_info
= BTUSB_ATH3012
},
201 { USB_DEVICE(0x0cf3, 0xe005), .driver_info
= BTUSB_ATH3012
},
202 { USB_DEVICE(0x13d3, 0x3362), .driver_info
= BTUSB_ATH3012
},
203 { USB_DEVICE(0x13d3, 0x3375), .driver_info
= BTUSB_ATH3012
},
204 { USB_DEVICE(0x13d3, 0x3393), .driver_info
= BTUSB_ATH3012
},
205 { USB_DEVICE(0x13d3, 0x3402), .driver_info
= BTUSB_ATH3012
},
206 { USB_DEVICE(0x13d3, 0x3408), .driver_info
= BTUSB_ATH3012
},
207 { USB_DEVICE(0x13d3, 0x3423), .driver_info
= BTUSB_ATH3012
},
208 { USB_DEVICE(0x13d3, 0x3432), .driver_info
= BTUSB_ATH3012
},
210 /* Atheros AR5BBU12 with sflash firmware */
211 { USB_DEVICE(0x0489, 0xe02c), .driver_info
= BTUSB_IGNORE
},
213 /* Atheros AR5BBU12 with sflash firmware */
214 { USB_DEVICE(0x0489, 0xe036), .driver_info
= BTUSB_ATH3012
},
215 { USB_DEVICE(0x0489, 0xe03c), .driver_info
= BTUSB_ATH3012
},
217 /* QCA ROME chipset */
218 { USB_DEVICE(0x0cf3, 0xe300), .driver_info
= BTUSB_QCA_ROME
},
219 { USB_DEVICE(0x0cf3, 0xe360), .driver_info
= BTUSB_QCA_ROME
},
221 /* Broadcom BCM2035 */
222 { USB_DEVICE(0x0a5c, 0x2009), .driver_info
= BTUSB_BCM92035
},
223 { USB_DEVICE(0x0a5c, 0x200a), .driver_info
= BTUSB_WRONG_SCO_MTU
},
224 { USB_DEVICE(0x0a5c, 0x2035), .driver_info
= BTUSB_WRONG_SCO_MTU
},
226 /* Broadcom BCM2045 */
227 { USB_DEVICE(0x0a5c, 0x2039), .driver_info
= BTUSB_WRONG_SCO_MTU
},
228 { USB_DEVICE(0x0a5c, 0x2101), .driver_info
= BTUSB_WRONG_SCO_MTU
},
230 /* IBM/Lenovo ThinkPad with Broadcom chip */
231 { USB_DEVICE(0x0a5c, 0x201e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
232 { USB_DEVICE(0x0a5c, 0x2110), .driver_info
= BTUSB_WRONG_SCO_MTU
},
234 /* HP laptop with Broadcom chip */
235 { USB_DEVICE(0x03f0, 0x171d), .driver_info
= BTUSB_WRONG_SCO_MTU
},
237 /* Dell laptop with Broadcom chip */
238 { USB_DEVICE(0x413c, 0x8126), .driver_info
= BTUSB_WRONG_SCO_MTU
},
240 /* Dell Wireless 370 and 410 devices */
241 { USB_DEVICE(0x413c, 0x8152), .driver_info
= BTUSB_WRONG_SCO_MTU
},
242 { USB_DEVICE(0x413c, 0x8156), .driver_info
= BTUSB_WRONG_SCO_MTU
},
244 /* Belkin F8T012 and F8T013 devices */
245 { USB_DEVICE(0x050d, 0x0012), .driver_info
= BTUSB_WRONG_SCO_MTU
},
246 { USB_DEVICE(0x050d, 0x0013), .driver_info
= BTUSB_WRONG_SCO_MTU
},
248 /* Asus WL-BTD202 device */
249 { USB_DEVICE(0x0b05, 0x1715), .driver_info
= BTUSB_WRONG_SCO_MTU
},
251 /* Kensington Bluetooth USB adapter */
252 { USB_DEVICE(0x047d, 0x105e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
254 /* RTX Telecom based adapters with buggy SCO support */
255 { USB_DEVICE(0x0400, 0x0807), .driver_info
= BTUSB_BROKEN_ISOC
},
256 { USB_DEVICE(0x0400, 0x080a), .driver_info
= BTUSB_BROKEN_ISOC
},
258 /* CONWISE Technology based adapters with buggy SCO support */
259 { USB_DEVICE(0x0e5e, 0x6622), .driver_info
= BTUSB_BROKEN_ISOC
},
261 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
262 { USB_DEVICE(0x1300, 0x0001), .driver_info
= BTUSB_SWAVE
},
264 /* Digianswer devices */
265 { USB_DEVICE(0x08fd, 0x0001), .driver_info
= BTUSB_DIGIANSWER
},
266 { USB_DEVICE(0x08fd, 0x0002), .driver_info
= BTUSB_IGNORE
},
268 /* CSR BlueCore Bluetooth Sniffer */
269 { USB_DEVICE(0x0a12, 0x0002),
270 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
272 /* Frontline ComProbe Bluetooth Sniffer */
273 { USB_DEVICE(0x16d3, 0x0002),
274 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
276 /* Marvell Bluetooth devices */
277 { USB_DEVICE(0x1286, 0x2044), .driver_info
= BTUSB_MARVELL
},
278 { USB_DEVICE(0x1286, 0x2046), .driver_info
= BTUSB_MARVELL
},
280 /* Intel Bluetooth devices */
281 { USB_DEVICE(0x8087, 0x07da), .driver_info
= BTUSB_CSR
},
282 { USB_DEVICE(0x8087, 0x07dc), .driver_info
= BTUSB_INTEL
},
283 { USB_DEVICE(0x8087, 0x0a2a), .driver_info
= BTUSB_INTEL
},
284 { USB_DEVICE(0x8087, 0x0a2b), .driver_info
= BTUSB_INTEL_NEW
},
286 /* Other Intel Bluetooth devices */
287 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
288 .driver_info
= BTUSB_IGNORE
},
290 { } /* Terminating entry */
293 #define BTUSB_MAX_ISOC_FRAMES 10
295 #define BTUSB_INTR_RUNNING 0
296 #define BTUSB_BULK_RUNNING 1
297 #define BTUSB_ISOC_RUNNING 2
298 #define BTUSB_SUSPENDING 3
299 #define BTUSB_DID_ISO_RESUME 4
300 #define BTUSB_BOOTLOADER 5
301 #define BTUSB_DOWNLOADING 6
302 #define BTUSB_FIRMWARE_LOADED 7
303 #define BTUSB_FIRMWARE_FAILED 8
304 #define BTUSB_BOOTING 9
307 struct hci_dev
*hdev
;
308 struct usb_device
*udev
;
309 struct usb_interface
*intf
;
310 struct usb_interface
*isoc
;
314 struct work_struct work
;
315 struct work_struct waker
;
317 struct usb_anchor deferred
;
318 struct usb_anchor tx_anchor
;
322 struct usb_anchor intr_anchor
;
323 struct usb_anchor bulk_anchor
;
324 struct usb_anchor isoc_anchor
;
327 struct sk_buff
*evt_skb
;
328 struct sk_buff
*acl_skb
;
329 struct sk_buff
*sco_skb
;
331 struct usb_endpoint_descriptor
*intr_ep
;
332 struct usb_endpoint_descriptor
*bulk_tx_ep
;
333 struct usb_endpoint_descriptor
*bulk_rx_ep
;
334 struct usb_endpoint_descriptor
*isoc_tx_ep
;
335 struct usb_endpoint_descriptor
*isoc_rx_ep
;
340 unsigned int sco_num
;
344 int (*recv_event
)(struct hci_dev
*hdev
, struct sk_buff
*skb
);
345 int (*recv_bulk
)(struct btusb_data
*data
, void *buffer
, int count
);
347 int (*setup_on_usb
)(struct hci_dev
*hdev
);
350 static inline void btusb_free_frags(struct btusb_data
*data
)
354 spin_lock_irqsave(&data
->rxlock
, flags
);
356 kfree_skb(data
->evt_skb
);
357 data
->evt_skb
= NULL
;
359 kfree_skb(data
->acl_skb
);
360 data
->acl_skb
= NULL
;
362 kfree_skb(data
->sco_skb
);
363 data
->sco_skb
= NULL
;
365 spin_unlock_irqrestore(&data
->rxlock
, flags
);
368 static int btusb_recv_intr(struct btusb_data
*data
, void *buffer
, int count
)
373 spin_lock(&data
->rxlock
);
380 skb
= bt_skb_alloc(HCI_MAX_EVENT_SIZE
, GFP_ATOMIC
);
386 bt_cb(skb
)->pkt_type
= HCI_EVENT_PKT
;
387 bt_cb(skb
)->expect
= HCI_EVENT_HDR_SIZE
;
390 len
= min_t(uint
, bt_cb(skb
)->expect
, count
);
391 memcpy(skb_put(skb
, len
), buffer
, len
);
395 bt_cb(skb
)->expect
-= len
;
397 if (skb
->len
== HCI_EVENT_HDR_SIZE
) {
398 /* Complete event header */
399 bt_cb(skb
)->expect
= hci_event_hdr(skb
)->plen
;
401 if (skb_tailroom(skb
) < bt_cb(skb
)->expect
) {
410 if (bt_cb(skb
)->expect
== 0) {
412 data
->recv_event(data
->hdev
, skb
);
418 spin_unlock(&data
->rxlock
);
423 static int btusb_recv_bulk(struct btusb_data
*data
, void *buffer
, int count
)
428 spin_lock(&data
->rxlock
);
435 skb
= bt_skb_alloc(HCI_MAX_FRAME_SIZE
, GFP_ATOMIC
);
441 bt_cb(skb
)->pkt_type
= HCI_ACLDATA_PKT
;
442 bt_cb(skb
)->expect
= HCI_ACL_HDR_SIZE
;
445 len
= min_t(uint
, bt_cb(skb
)->expect
, count
);
446 memcpy(skb_put(skb
, len
), buffer
, len
);
450 bt_cb(skb
)->expect
-= len
;
452 if (skb
->len
== HCI_ACL_HDR_SIZE
) {
453 __le16 dlen
= hci_acl_hdr(skb
)->dlen
;
455 /* Complete ACL header */
456 bt_cb(skb
)->expect
= __le16_to_cpu(dlen
);
458 if (skb_tailroom(skb
) < bt_cb(skb
)->expect
) {
467 if (bt_cb(skb
)->expect
== 0) {
469 hci_recv_frame(data
->hdev
, skb
);
475 spin_unlock(&data
->rxlock
);
480 static int btusb_recv_isoc(struct btusb_data
*data
, void *buffer
, int count
)
485 spin_lock(&data
->rxlock
);
492 skb
= bt_skb_alloc(HCI_MAX_SCO_SIZE
, GFP_ATOMIC
);
498 bt_cb(skb
)->pkt_type
= HCI_SCODATA_PKT
;
499 bt_cb(skb
)->expect
= HCI_SCO_HDR_SIZE
;
502 len
= min_t(uint
, bt_cb(skb
)->expect
, count
);
503 memcpy(skb_put(skb
, len
), buffer
, len
);
507 bt_cb(skb
)->expect
-= len
;
509 if (skb
->len
== HCI_SCO_HDR_SIZE
) {
510 /* Complete SCO header */
511 bt_cb(skb
)->expect
= hci_sco_hdr(skb
)->dlen
;
513 if (skb_tailroom(skb
) < bt_cb(skb
)->expect
) {
522 if (bt_cb(skb
)->expect
== 0) {
524 hci_recv_frame(data
->hdev
, skb
);
530 spin_unlock(&data
->rxlock
);
535 static void btusb_intr_complete(struct urb
*urb
)
537 struct hci_dev
*hdev
= urb
->context
;
538 struct btusb_data
*data
= hci_get_drvdata(hdev
);
541 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
544 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
547 if (urb
->status
== 0) {
548 hdev
->stat
.byte_rx
+= urb
->actual_length
;
550 if (btusb_recv_intr(data
, urb
->transfer_buffer
,
551 urb
->actual_length
) < 0) {
552 BT_ERR("%s corrupted event packet", hdev
->name
);
555 } else if (urb
->status
== -ENOENT
) {
556 /* Avoid suspend failed when usb_kill_urb */
560 if (!test_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
563 usb_mark_last_busy(data
->udev
);
564 usb_anchor_urb(urb
, &data
->intr_anchor
);
566 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
568 /* -EPERM: urb is being killed;
569 * -ENODEV: device got disconnected */
570 if (err
!= -EPERM
&& err
!= -ENODEV
)
571 BT_ERR("%s urb %p failed to resubmit (%d)",
572 hdev
->name
, urb
, -err
);
573 usb_unanchor_urb(urb
);
577 static int btusb_submit_intr_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
579 struct btusb_data
*data
= hci_get_drvdata(hdev
);
585 BT_DBG("%s", hdev
->name
);
590 urb
= usb_alloc_urb(0, mem_flags
);
594 size
= le16_to_cpu(data
->intr_ep
->wMaxPacketSize
);
596 buf
= kmalloc(size
, mem_flags
);
602 pipe
= usb_rcvintpipe(data
->udev
, data
->intr_ep
->bEndpointAddress
);
604 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
,
605 btusb_intr_complete
, hdev
, data
->intr_ep
->bInterval
);
607 urb
->transfer_flags
|= URB_FREE_BUFFER
;
609 usb_anchor_urb(urb
, &data
->intr_anchor
);
611 err
= usb_submit_urb(urb
, mem_flags
);
613 if (err
!= -EPERM
&& err
!= -ENODEV
)
614 BT_ERR("%s urb %p submission failed (%d)",
615 hdev
->name
, urb
, -err
);
616 usb_unanchor_urb(urb
);
624 static void btusb_bulk_complete(struct urb
*urb
)
626 struct hci_dev
*hdev
= urb
->context
;
627 struct btusb_data
*data
= hci_get_drvdata(hdev
);
630 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
633 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
636 if (urb
->status
== 0) {
637 hdev
->stat
.byte_rx
+= urb
->actual_length
;
639 if (data
->recv_bulk(data
, urb
->transfer_buffer
,
640 urb
->actual_length
) < 0) {
641 BT_ERR("%s corrupted ACL packet", hdev
->name
);
644 } else if (urb
->status
== -ENOENT
) {
645 /* Avoid suspend failed when usb_kill_urb */
649 if (!test_bit(BTUSB_BULK_RUNNING
, &data
->flags
))
652 usb_anchor_urb(urb
, &data
->bulk_anchor
);
653 usb_mark_last_busy(data
->udev
);
655 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
657 /* -EPERM: urb is being killed;
658 * -ENODEV: device got disconnected */
659 if (err
!= -EPERM
&& err
!= -ENODEV
)
660 BT_ERR("%s urb %p failed to resubmit (%d)",
661 hdev
->name
, urb
, -err
);
662 usb_unanchor_urb(urb
);
666 static int btusb_submit_bulk_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
668 struct btusb_data
*data
= hci_get_drvdata(hdev
);
672 int err
, size
= HCI_MAX_FRAME_SIZE
;
674 BT_DBG("%s", hdev
->name
);
676 if (!data
->bulk_rx_ep
)
679 urb
= usb_alloc_urb(0, mem_flags
);
683 buf
= kmalloc(size
, mem_flags
);
689 pipe
= usb_rcvbulkpipe(data
->udev
, data
->bulk_rx_ep
->bEndpointAddress
);
691 usb_fill_bulk_urb(urb
, data
->udev
, pipe
, buf
, size
,
692 btusb_bulk_complete
, hdev
);
694 urb
->transfer_flags
|= URB_FREE_BUFFER
;
696 usb_mark_last_busy(data
->udev
);
697 usb_anchor_urb(urb
, &data
->bulk_anchor
);
699 err
= usb_submit_urb(urb
, mem_flags
);
701 if (err
!= -EPERM
&& err
!= -ENODEV
)
702 BT_ERR("%s urb %p submission failed (%d)",
703 hdev
->name
, urb
, -err
);
704 usb_unanchor_urb(urb
);
712 static void btusb_isoc_complete(struct urb
*urb
)
714 struct hci_dev
*hdev
= urb
->context
;
715 struct btusb_data
*data
= hci_get_drvdata(hdev
);
718 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
721 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
724 if (urb
->status
== 0) {
725 for (i
= 0; i
< urb
->number_of_packets
; i
++) {
726 unsigned int offset
= urb
->iso_frame_desc
[i
].offset
;
727 unsigned int length
= urb
->iso_frame_desc
[i
].actual_length
;
729 if (urb
->iso_frame_desc
[i
].status
)
732 hdev
->stat
.byte_rx
+= length
;
734 if (btusb_recv_isoc(data
, urb
->transfer_buffer
+ offset
,
736 BT_ERR("%s corrupted SCO packet", hdev
->name
);
740 } else if (urb
->status
== -ENOENT
) {
741 /* Avoid suspend failed when usb_kill_urb */
745 if (!test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
))
748 usb_anchor_urb(urb
, &data
->isoc_anchor
);
750 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
752 /* -EPERM: urb is being killed;
753 * -ENODEV: device got disconnected */
754 if (err
!= -EPERM
&& err
!= -ENODEV
)
755 BT_ERR("%s urb %p failed to resubmit (%d)",
756 hdev
->name
, urb
, -err
);
757 usb_unanchor_urb(urb
);
761 static inline void __fill_isoc_descriptor(struct urb
*urb
, int len
, int mtu
)
765 BT_DBG("len %d mtu %d", len
, mtu
);
767 for (i
= 0; i
< BTUSB_MAX_ISOC_FRAMES
&& len
>= mtu
;
768 i
++, offset
+= mtu
, len
-= mtu
) {
769 urb
->iso_frame_desc
[i
].offset
= offset
;
770 urb
->iso_frame_desc
[i
].length
= mtu
;
773 if (len
&& i
< BTUSB_MAX_ISOC_FRAMES
) {
774 urb
->iso_frame_desc
[i
].offset
= offset
;
775 urb
->iso_frame_desc
[i
].length
= len
;
779 urb
->number_of_packets
= i
;
782 static int btusb_submit_isoc_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
784 struct btusb_data
*data
= hci_get_drvdata(hdev
);
790 BT_DBG("%s", hdev
->name
);
792 if (!data
->isoc_rx_ep
)
795 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, mem_flags
);
799 size
= le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
) *
800 BTUSB_MAX_ISOC_FRAMES
;
802 buf
= kmalloc(size
, mem_flags
);
808 pipe
= usb_rcvisocpipe(data
->udev
, data
->isoc_rx_ep
->bEndpointAddress
);
810 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
, btusb_isoc_complete
,
811 hdev
, data
->isoc_rx_ep
->bInterval
);
813 urb
->transfer_flags
= URB_FREE_BUFFER
| URB_ISO_ASAP
;
815 __fill_isoc_descriptor(urb
, size
,
816 le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
));
818 usb_anchor_urb(urb
, &data
->isoc_anchor
);
820 err
= usb_submit_urb(urb
, mem_flags
);
822 if (err
!= -EPERM
&& err
!= -ENODEV
)
823 BT_ERR("%s urb %p submission failed (%d)",
824 hdev
->name
, urb
, -err
);
825 usb_unanchor_urb(urb
);
833 static void btusb_tx_complete(struct urb
*urb
)
835 struct sk_buff
*skb
= urb
->context
;
836 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
837 struct btusb_data
*data
= hci_get_drvdata(hdev
);
839 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
842 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
846 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
851 spin_lock(&data
->txlock
);
852 data
->tx_in_flight
--;
853 spin_unlock(&data
->txlock
);
855 kfree(urb
->setup_packet
);
860 static void btusb_isoc_tx_complete(struct urb
*urb
)
862 struct sk_buff
*skb
= urb
->context
;
863 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
865 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
868 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
872 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
877 kfree(urb
->setup_packet
);
882 static int btusb_open(struct hci_dev
*hdev
)
884 struct btusb_data
*data
= hci_get_drvdata(hdev
);
887 BT_DBG("%s", hdev
->name
);
889 /* Patching USB firmware files prior to starting any URBs of HCI path
890 * It is more safe to use USB bulk channel for downloading USB patch
892 if (data
->setup_on_usb
) {
893 err
= data
->setup_on_usb(hdev
);
898 err
= usb_autopm_get_interface(data
->intf
);
902 data
->intf
->needs_remote_wakeup
= 1;
904 if (test_and_set_bit(HCI_RUNNING
, &hdev
->flags
))
907 if (test_and_set_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
910 err
= btusb_submit_intr_urb(hdev
, GFP_KERNEL
);
914 err
= btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
916 usb_kill_anchored_urbs(&data
->intr_anchor
);
920 set_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
921 btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
924 usb_autopm_put_interface(data
->intf
);
928 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
929 clear_bit(HCI_RUNNING
, &hdev
->flags
);
930 usb_autopm_put_interface(data
->intf
);
934 static void btusb_stop_traffic(struct btusb_data
*data
)
936 usb_kill_anchored_urbs(&data
->intr_anchor
);
937 usb_kill_anchored_urbs(&data
->bulk_anchor
);
938 usb_kill_anchored_urbs(&data
->isoc_anchor
);
941 static int btusb_close(struct hci_dev
*hdev
)
943 struct btusb_data
*data
= hci_get_drvdata(hdev
);
946 BT_DBG("%s", hdev
->name
);
948 if (!test_and_clear_bit(HCI_RUNNING
, &hdev
->flags
))
951 cancel_work_sync(&data
->work
);
952 cancel_work_sync(&data
->waker
);
954 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
955 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
956 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
958 btusb_stop_traffic(data
);
959 btusb_free_frags(data
);
961 err
= usb_autopm_get_interface(data
->intf
);
965 data
->intf
->needs_remote_wakeup
= 0;
966 usb_autopm_put_interface(data
->intf
);
969 usb_scuttle_anchored_urbs(&data
->deferred
);
973 static int btusb_flush(struct hci_dev
*hdev
)
975 struct btusb_data
*data
= hci_get_drvdata(hdev
);
977 BT_DBG("%s", hdev
->name
);
979 usb_kill_anchored_urbs(&data
->tx_anchor
);
980 btusb_free_frags(data
);
985 static struct urb
*alloc_ctrl_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
987 struct btusb_data
*data
= hci_get_drvdata(hdev
);
988 struct usb_ctrlrequest
*dr
;
992 urb
= usb_alloc_urb(0, GFP_KERNEL
);
994 return ERR_PTR(-ENOMEM
);
996 dr
= kmalloc(sizeof(*dr
), GFP_KERNEL
);
999 return ERR_PTR(-ENOMEM
);
1002 dr
->bRequestType
= data
->cmdreq_type
;
1003 dr
->bRequest
= data
->cmdreq
;
1006 dr
->wLength
= __cpu_to_le16(skb
->len
);
1008 pipe
= usb_sndctrlpipe(data
->udev
, 0x00);
1010 usb_fill_control_urb(urb
, data
->udev
, pipe
, (void *)dr
,
1011 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1013 skb
->dev
= (void *)hdev
;
1018 static struct urb
*alloc_bulk_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1020 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1024 if (!data
->bulk_tx_ep
)
1025 return ERR_PTR(-ENODEV
);
1027 urb
= usb_alloc_urb(0, GFP_KERNEL
);
1029 return ERR_PTR(-ENOMEM
);
1031 pipe
= usb_sndbulkpipe(data
->udev
, data
->bulk_tx_ep
->bEndpointAddress
);
1033 usb_fill_bulk_urb(urb
, data
->udev
, pipe
,
1034 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1036 skb
->dev
= (void *)hdev
;
1041 static struct urb
*alloc_isoc_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1043 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1047 if (!data
->isoc_tx_ep
)
1048 return ERR_PTR(-ENODEV
);
1050 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, GFP_KERNEL
);
1052 return ERR_PTR(-ENOMEM
);
1054 pipe
= usb_sndisocpipe(data
->udev
, data
->isoc_tx_ep
->bEndpointAddress
);
1056 usb_fill_int_urb(urb
, data
->udev
, pipe
,
1057 skb
->data
, skb
->len
, btusb_isoc_tx_complete
,
1058 skb
, data
->isoc_tx_ep
->bInterval
);
1060 urb
->transfer_flags
= URB_ISO_ASAP
;
1062 __fill_isoc_descriptor(urb
, skb
->len
,
1063 le16_to_cpu(data
->isoc_tx_ep
->wMaxPacketSize
));
1065 skb
->dev
= (void *)hdev
;
1070 static int submit_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1072 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1075 usb_anchor_urb(urb
, &data
->tx_anchor
);
1077 err
= usb_submit_urb(urb
, GFP_KERNEL
);
1079 if (err
!= -EPERM
&& err
!= -ENODEV
)
1080 BT_ERR("%s urb %p submission failed (%d)",
1081 hdev
->name
, urb
, -err
);
1082 kfree(urb
->setup_packet
);
1083 usb_unanchor_urb(urb
);
1085 usb_mark_last_busy(data
->udev
);
1092 static int submit_or_queue_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1094 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1095 unsigned long flags
;
1098 spin_lock_irqsave(&data
->txlock
, flags
);
1099 suspending
= test_bit(BTUSB_SUSPENDING
, &data
->flags
);
1101 data
->tx_in_flight
++;
1102 spin_unlock_irqrestore(&data
->txlock
, flags
);
1105 return submit_tx_urb(hdev
, urb
);
1107 usb_anchor_urb(urb
, &data
->deferred
);
1108 schedule_work(&data
->waker
);
1114 static int btusb_send_frame(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1118 BT_DBG("%s", hdev
->name
);
1120 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
1123 switch (bt_cb(skb
)->pkt_type
) {
1124 case HCI_COMMAND_PKT
:
1125 urb
= alloc_ctrl_urb(hdev
, skb
);
1127 return PTR_ERR(urb
);
1129 hdev
->stat
.cmd_tx
++;
1130 return submit_or_queue_tx_urb(hdev
, urb
);
1132 case HCI_ACLDATA_PKT
:
1133 urb
= alloc_bulk_urb(hdev
, skb
);
1135 return PTR_ERR(urb
);
1137 hdev
->stat
.acl_tx
++;
1138 return submit_or_queue_tx_urb(hdev
, urb
);
1140 case HCI_SCODATA_PKT
:
1141 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
1144 urb
= alloc_isoc_urb(hdev
, skb
);
1146 return PTR_ERR(urb
);
1148 hdev
->stat
.sco_tx
++;
1149 return submit_tx_urb(hdev
, urb
);
1155 static void btusb_notify(struct hci_dev
*hdev
, unsigned int evt
)
1157 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1159 BT_DBG("%s evt %d", hdev
->name
, evt
);
1161 if (hci_conn_num(hdev
, SCO_LINK
) != data
->sco_num
) {
1162 data
->sco_num
= hci_conn_num(hdev
, SCO_LINK
);
1163 schedule_work(&data
->work
);
1167 static inline int __set_isoc_interface(struct hci_dev
*hdev
, int altsetting
)
1169 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1170 struct usb_interface
*intf
= data
->isoc
;
1171 struct usb_endpoint_descriptor
*ep_desc
;
1177 err
= usb_set_interface(data
->udev
, 1, altsetting
);
1179 BT_ERR("%s setting interface failed (%d)", hdev
->name
, -err
);
1183 data
->isoc_altsetting
= altsetting
;
1185 data
->isoc_tx_ep
= NULL
;
1186 data
->isoc_rx_ep
= NULL
;
1188 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
1189 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
1191 if (!data
->isoc_tx_ep
&& usb_endpoint_is_isoc_out(ep_desc
)) {
1192 data
->isoc_tx_ep
= ep_desc
;
1196 if (!data
->isoc_rx_ep
&& usb_endpoint_is_isoc_in(ep_desc
)) {
1197 data
->isoc_rx_ep
= ep_desc
;
1202 if (!data
->isoc_tx_ep
|| !data
->isoc_rx_ep
) {
1203 BT_ERR("%s invalid SCO descriptors", hdev
->name
);
1210 static void btusb_work(struct work_struct
*work
)
1212 struct btusb_data
*data
= container_of(work
, struct btusb_data
, work
);
1213 struct hci_dev
*hdev
= data
->hdev
;
1217 if (data
->sco_num
> 0) {
1218 if (!test_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
)) {
1219 err
= usb_autopm_get_interface(data
->isoc
? data
->isoc
: data
->intf
);
1221 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1222 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1226 set_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
);
1229 if (hdev
->voice_setting
& 0x0020) {
1230 static const int alts
[3] = { 2, 4, 5 };
1232 new_alts
= alts
[data
->sco_num
- 1];
1234 new_alts
= data
->sco_num
;
1237 if (data
->isoc_altsetting
!= new_alts
) {
1238 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1239 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1241 if (__set_isoc_interface(hdev
, new_alts
) < 0)
1245 if (!test_and_set_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
1246 if (btusb_submit_isoc_urb(hdev
, GFP_KERNEL
) < 0)
1247 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1249 btusb_submit_isoc_urb(hdev
, GFP_KERNEL
);
1252 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1253 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1255 __set_isoc_interface(hdev
, 0);
1256 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
))
1257 usb_autopm_put_interface(data
->isoc
? data
->isoc
: data
->intf
);
1261 static void btusb_waker(struct work_struct
*work
)
1263 struct btusb_data
*data
= container_of(work
, struct btusb_data
, waker
);
1266 err
= usb_autopm_get_interface(data
->intf
);
1270 usb_autopm_put_interface(data
->intf
);
1273 static struct sk_buff
*btusb_read_local_version(struct hci_dev
*hdev
)
1275 struct sk_buff
*skb
;
1277 skb
= __hci_cmd_sync(hdev
, HCI_OP_READ_LOCAL_VERSION
, 0, NULL
,
1280 BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
1281 hdev
->name
, PTR_ERR(skb
));
1285 if (skb
->len
!= sizeof(struct hci_rp_read_local_version
)) {
1286 BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
1289 return ERR_PTR(-EIO
);
1295 static int btusb_setup_bcm92035(struct hci_dev
*hdev
)
1297 struct sk_buff
*skb
;
1300 BT_DBG("%s", hdev
->name
);
1302 skb
= __hci_cmd_sync(hdev
, 0xfc3b, 1, &val
, HCI_INIT_TIMEOUT
);
1304 BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb
));
1311 static int btusb_setup_csr(struct hci_dev
*hdev
)
1313 struct hci_rp_read_local_version
*rp
;
1314 struct sk_buff
*skb
;
1317 BT_DBG("%s", hdev
->name
);
1319 skb
= btusb_read_local_version(hdev
);
1321 return -PTR_ERR(skb
);
1323 rp
= (struct hci_rp_read_local_version
*)skb
->data
;
1326 if (le16_to_cpu(rp
->manufacturer
) != 10) {
1327 /* Clear the reset quirk since this is not an actual
1328 * early Bluetooth 1.1 device from CSR.
1330 clear_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
1332 /* These fake CSR controllers have all a broken
1333 * stored link key handling and so just disable it.
1335 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
,
1340 ret
= -bt_to_errno(rp
->status
);
1347 struct intel_version
{
1360 struct intel_boot_params
{
1372 bdaddr_t otp_bdaddr
;
1373 __u8 min_fw_build_nn
;
1374 __u8 min_fw_build_cw
;
1375 __u8 min_fw_build_yy
;
1377 __u8 unlocked_state
;
1380 static const struct firmware
*btusb_setup_intel_get_fw(struct hci_dev
*hdev
,
1381 struct intel_version
*ver
)
1383 const struct firmware
*fw
;
1387 snprintf(fwname
, sizeof(fwname
),
1388 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1389 ver
->hw_platform
, ver
->hw_variant
, ver
->hw_revision
,
1390 ver
->fw_variant
, ver
->fw_revision
, ver
->fw_build_num
,
1391 ver
->fw_build_ww
, ver
->fw_build_yy
);
1393 ret
= request_firmware(&fw
, fwname
, &hdev
->dev
);
1395 if (ret
== -EINVAL
) {
1396 BT_ERR("%s Intel firmware file request failed (%d)",
1401 BT_ERR("%s failed to open Intel firmware file: %s(%d)",
1402 hdev
->name
, fwname
, ret
);
1404 /* If the correct firmware patch file is not found, use the
1405 * default firmware patch file instead
1407 snprintf(fwname
, sizeof(fwname
), "intel/ibt-hw-%x.%x.bseq",
1408 ver
->hw_platform
, ver
->hw_variant
);
1409 if (request_firmware(&fw
, fwname
, &hdev
->dev
) < 0) {
1410 BT_ERR("%s failed to open default Intel fw file: %s",
1411 hdev
->name
, fwname
);
1416 BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev
->name
, fwname
);
1421 static int btusb_setup_intel_patching(struct hci_dev
*hdev
,
1422 const struct firmware
*fw
,
1423 const u8
**fw_ptr
, int *disable_patch
)
1425 struct sk_buff
*skb
;
1426 struct hci_command_hdr
*cmd
;
1427 const u8
*cmd_param
;
1428 struct hci_event_hdr
*evt
= NULL
;
1429 const u8
*evt_param
= NULL
;
1430 int remain
= fw
->size
- (*fw_ptr
- fw
->data
);
1432 /* The first byte indicates the types of the patch command or event.
1433 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1434 * in the current firmware buffer doesn't start with 0x01 or
1435 * the size of remain buffer is smaller than HCI command header,
1436 * the firmware file is corrupted and it should stop the patching
1439 if (remain
> HCI_COMMAND_HDR_SIZE
&& *fw_ptr
[0] != 0x01) {
1440 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev
->name
);
1446 cmd
= (struct hci_command_hdr
*)(*fw_ptr
);
1447 *fw_ptr
+= sizeof(*cmd
);
1448 remain
-= sizeof(*cmd
);
1450 /* Ensure that the remain firmware data is long enough than the length
1451 * of command parameter. If not, the firmware file is corrupted.
1453 if (remain
< cmd
->plen
) {
1454 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev
->name
);
1458 /* If there is a command that loads a patch in the firmware
1459 * file, then enable the patch upon success, otherwise just
1460 * disable the manufacturer mode, for example patch activation
1461 * is not required when the default firmware patch file is used
1462 * because there are no patch data to load.
1464 if (*disable_patch
&& le16_to_cpu(cmd
->opcode
) == 0xfc8e)
1467 cmd_param
= *fw_ptr
;
1468 *fw_ptr
+= cmd
->plen
;
1469 remain
-= cmd
->plen
;
1471 /* This reads the expected events when the above command is sent to the
1472 * device. Some vendor commands expects more than one events, for
1473 * example command status event followed by vendor specific event.
1474 * For this case, it only keeps the last expected event. so the command
1475 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1476 * last expected event.
1478 while (remain
> HCI_EVENT_HDR_SIZE
&& *fw_ptr
[0] == 0x02) {
1482 evt
= (struct hci_event_hdr
*)(*fw_ptr
);
1483 *fw_ptr
+= sizeof(*evt
);
1484 remain
-= sizeof(*evt
);
1486 if (remain
< evt
->plen
) {
1487 BT_ERR("%s Intel fw corrupted: invalid evt len",
1492 evt_param
= *fw_ptr
;
1493 *fw_ptr
+= evt
->plen
;
1494 remain
-= evt
->plen
;
1497 /* Every HCI commands in the firmware file has its correspond event.
1498 * If event is not found or remain is smaller than zero, the firmware
1499 * file is corrupted.
1501 if (!evt
|| !evt_param
|| remain
< 0) {
1502 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev
->name
);
1506 skb
= __hci_cmd_sync_ev(hdev
, le16_to_cpu(cmd
->opcode
), cmd
->plen
,
1507 cmd_param
, evt
->evt
, HCI_INIT_TIMEOUT
);
1509 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
1510 hdev
->name
, cmd
->opcode
, PTR_ERR(skb
));
1511 return PTR_ERR(skb
);
1514 /* It ensures that the returned event matches the event data read from
1515 * the firmware file. At fist, it checks the length and then
1516 * the contents of the event.
1518 if (skb
->len
!= evt
->plen
) {
1519 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev
->name
,
1520 le16_to_cpu(cmd
->opcode
));
1525 if (memcmp(skb
->data
, evt_param
, evt
->plen
)) {
1526 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
1527 hdev
->name
, le16_to_cpu(cmd
->opcode
));
1536 #define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
1538 static int btusb_check_bdaddr_intel(struct hci_dev
*hdev
)
1540 struct sk_buff
*skb
;
1541 struct hci_rp_read_bd_addr
*rp
;
1543 skb
= __hci_cmd_sync(hdev
, HCI_OP_READ_BD_ADDR
, 0, NULL
,
1546 BT_ERR("%s reading Intel device address failed (%ld)",
1547 hdev
->name
, PTR_ERR(skb
));
1548 return PTR_ERR(skb
);
1551 if (skb
->len
!= sizeof(*rp
)) {
1552 BT_ERR("%s Intel device address length mismatch", hdev
->name
);
1557 rp
= (struct hci_rp_read_bd_addr
*)skb
->data
;
1559 BT_ERR("%s Intel device address result failed (%02x)",
1560 hdev
->name
, rp
->status
);
1562 return -bt_to_errno(rp
->status
);
1565 /* For some Intel based controllers, the default Bluetooth device
1566 * address 00:03:19:9E:8B:00 can be found. These controllers are
1567 * fully operational, but have the danger of duplicate addresses
1568 * and that in turn can cause problems with Bluetooth operation.
1570 if (!bacmp(&rp
->bdaddr
, BDADDR_INTEL
)) {
1571 BT_ERR("%s found Intel default device address (%pMR)",
1572 hdev
->name
, &rp
->bdaddr
);
1573 set_bit(HCI_QUIRK_INVALID_BDADDR
, &hdev
->quirks
);
1581 static int btusb_setup_intel(struct hci_dev
*hdev
)
1583 struct sk_buff
*skb
;
1584 const struct firmware
*fw
;
1587 struct intel_version
*ver
;
1589 const u8 mfg_enable
[] = { 0x01, 0x00 };
1590 const u8 mfg_disable
[] = { 0x00, 0x00 };
1591 const u8 mfg_reset_deactivate
[] = { 0x00, 0x01 };
1592 const u8 mfg_reset_activate
[] = { 0x00, 0x02 };
1594 BT_DBG("%s", hdev
->name
);
1596 /* The controller has a bug with the first HCI command sent to it
1597 * returning number of completed commands as zero. This would stall the
1598 * command processing in the Bluetooth core.
1600 * As a workaround, send HCI Reset command first which will reset the
1601 * number of completed commands and allow normal command processing
1604 skb
= __hci_cmd_sync(hdev
, HCI_OP_RESET
, 0, NULL
, HCI_INIT_TIMEOUT
);
1606 BT_ERR("%s sending initial HCI reset command failed (%ld)",
1607 hdev
->name
, PTR_ERR(skb
));
1608 return PTR_ERR(skb
);
1612 /* Read Intel specific controller version first to allow selection of
1613 * which firmware file to load.
1615 * The returned information are hardware variant and revision plus
1616 * firmware variant, revision and build number.
1618 skb
= __hci_cmd_sync(hdev
, 0xfc05, 0, NULL
, HCI_INIT_TIMEOUT
);
1620 BT_ERR("%s reading Intel fw version command failed (%ld)",
1621 hdev
->name
, PTR_ERR(skb
));
1622 return PTR_ERR(skb
);
1625 if (skb
->len
!= sizeof(*ver
)) {
1626 BT_ERR("%s Intel version event length mismatch", hdev
->name
);
1631 ver
= (struct intel_version
*)skb
->data
;
1633 BT_ERR("%s Intel fw version event failed (%02x)", hdev
->name
,
1636 return -bt_to_errno(ver
->status
);
1639 BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
1640 hdev
->name
, ver
->hw_platform
, ver
->hw_variant
,
1641 ver
->hw_revision
, ver
->fw_variant
, ver
->fw_revision
,
1642 ver
->fw_build_num
, ver
->fw_build_ww
, ver
->fw_build_yy
,
1645 /* fw_patch_num indicates the version of patch the device currently
1646 * have. If there is no patch data in the device, it is always 0x00.
1647 * So, if it is other than 0x00, no need to patch the deivce again.
1649 if (ver
->fw_patch_num
) {
1650 BT_INFO("%s: Intel device is already patched. patch num: %02x",
1651 hdev
->name
, ver
->fw_patch_num
);
1653 btusb_check_bdaddr_intel(hdev
);
1657 /* Opens the firmware patch file based on the firmware version read
1658 * from the controller. If it fails to open the matching firmware
1659 * patch file, it tries to open the default firmware patch file.
1660 * If no patch file is found, allow the device to operate without
1663 fw
= btusb_setup_intel_get_fw(hdev
, ver
);
1666 btusb_check_bdaddr_intel(hdev
);
1671 /* This Intel specific command enables the manufacturer mode of the
1674 * Only while this mode is enabled, the driver can download the
1675 * firmware patch data and configuration parameters.
1677 skb
= __hci_cmd_sync(hdev
, 0xfc11, 2, mfg_enable
, HCI_INIT_TIMEOUT
);
1679 BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
1680 hdev
->name
, PTR_ERR(skb
));
1681 release_firmware(fw
);
1682 return PTR_ERR(skb
);
1686 u8 evt_status
= skb
->data
[0];
1688 BT_ERR("%s enable Intel manufacturer mode event failed (%02x)",
1689 hdev
->name
, evt_status
);
1691 release_firmware(fw
);
1692 return -bt_to_errno(evt_status
);
1698 /* The firmware data file consists of list of Intel specific HCI
1699 * commands and its expected events. The first byte indicates the
1700 * type of the message, either HCI command or HCI event.
1702 * It reads the command and its expected event from the firmware file,
1703 * and send to the controller. Once __hci_cmd_sync_ev() returns,
1704 * the returned event is compared with the event read from the firmware
1705 * file and it will continue until all the messages are downloaded to
1708 * Once the firmware patching is completed successfully,
1709 * the manufacturer mode is disabled with reset and activating the
1712 * If the firmware patching fails, the manufacturer mode is
1713 * disabled with reset and deactivating the patch.
1715 * If the default patch file is used, no reset is done when disabling
1718 while (fw
->size
> fw_ptr
- fw
->data
) {
1721 ret
= btusb_setup_intel_patching(hdev
, fw
, &fw_ptr
,
1724 goto exit_mfg_deactivate
;
1727 release_firmware(fw
);
1730 goto exit_mfg_disable
;
1732 /* Patching completed successfully and disable the manufacturer mode
1733 * with reset and activate the downloaded firmware patches.
1735 skb
= __hci_cmd_sync(hdev
, 0xfc11, sizeof(mfg_reset_activate
),
1736 mfg_reset_activate
, HCI_INIT_TIMEOUT
);
1738 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1739 hdev
->name
, PTR_ERR(skb
));
1740 return PTR_ERR(skb
);
1744 BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
1747 btusb_check_bdaddr_intel(hdev
);
1751 /* Disable the manufacturer mode without reset */
1752 skb
= __hci_cmd_sync(hdev
, 0xfc11, sizeof(mfg_disable
), mfg_disable
,
1755 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1756 hdev
->name
, PTR_ERR(skb
));
1757 return PTR_ERR(skb
);
1761 BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev
->name
);
1763 btusb_check_bdaddr_intel(hdev
);
1766 exit_mfg_deactivate
:
1767 release_firmware(fw
);
1769 /* Patching failed. Disable the manufacturer mode with reset and
1770 * deactivate the downloaded firmware patches.
1772 skb
= __hci_cmd_sync(hdev
, 0xfc11, sizeof(mfg_reset_deactivate
),
1773 mfg_reset_deactivate
, HCI_INIT_TIMEOUT
);
1775 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1776 hdev
->name
, PTR_ERR(skb
));
1777 return PTR_ERR(skb
);
1781 BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
1784 btusb_check_bdaddr_intel(hdev
);
1788 static int inject_cmd_complete(struct hci_dev
*hdev
, __u16 opcode
)
1790 struct sk_buff
*skb
;
1791 struct hci_event_hdr
*hdr
;
1792 struct hci_ev_cmd_complete
*evt
;
1794 skb
= bt_skb_alloc(sizeof(*hdr
) + sizeof(*evt
) + 1, GFP_ATOMIC
);
1798 hdr
= (struct hci_event_hdr
*)skb_put(skb
, sizeof(*hdr
));
1799 hdr
->evt
= HCI_EV_CMD_COMPLETE
;
1800 hdr
->plen
= sizeof(*evt
) + 1;
1802 evt
= (struct hci_ev_cmd_complete
*)skb_put(skb
, sizeof(*evt
));
1804 evt
->opcode
= cpu_to_le16(opcode
);
1806 *skb_put(skb
, 1) = 0x00;
1808 bt_cb(skb
)->pkt_type
= HCI_EVENT_PKT
;
1810 return hci_recv_frame(hdev
, skb
);
1813 static int btusb_recv_bulk_intel(struct btusb_data
*data
, void *buffer
,
1816 /* When the device is in bootloader mode, then it can send
1817 * events via the bulk endpoint. These events are treated the
1818 * same way as the ones received from the interrupt endpoint.
1820 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
))
1821 return btusb_recv_intr(data
, buffer
, count
);
1823 return btusb_recv_bulk(data
, buffer
, count
);
1826 static int btusb_recv_event_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1828 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1830 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
1831 struct hci_event_hdr
*hdr
= (void *)skb
->data
;
1833 /* When the firmware loading completes the device sends
1834 * out a vendor specific event indicating the result of
1835 * the firmware loading.
1837 if (skb
->len
== 7 && hdr
->evt
== 0xff && hdr
->plen
== 0x05 &&
1838 skb
->data
[2] == 0x06) {
1839 if (skb
->data
[3] != 0x00)
1840 test_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
);
1842 if (test_and_clear_bit(BTUSB_DOWNLOADING
,
1844 test_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
)) {
1845 smp_mb__after_atomic();
1846 wake_up_bit(&data
->flags
, BTUSB_DOWNLOADING
);
1850 /* When switching to the operational firmware the device
1851 * sends a vendor specific event indicating that the bootup
1854 if (skb
->len
== 9 && hdr
->evt
== 0xff && hdr
->plen
== 0x07 &&
1855 skb
->data
[2] == 0x02) {
1856 if (test_and_clear_bit(BTUSB_BOOTING
, &data
->flags
)) {
1857 smp_mb__after_atomic();
1858 wake_up_bit(&data
->flags
, BTUSB_BOOTING
);
1863 return hci_recv_frame(hdev
, skb
);
1866 static int btusb_send_frame_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1868 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1871 BT_DBG("%s", hdev
->name
);
1873 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
1876 switch (bt_cb(skb
)->pkt_type
) {
1877 case HCI_COMMAND_PKT
:
1878 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
1879 struct hci_command_hdr
*cmd
= (void *)skb
->data
;
1880 __u16 opcode
= le16_to_cpu(cmd
->opcode
);
1882 /* When in bootloader mode and the command 0xfc09
1883 * is received, it needs to be send down the
1884 * bulk endpoint. So allocate a bulk URB instead.
1886 if (opcode
== 0xfc09)
1887 urb
= alloc_bulk_urb(hdev
, skb
);
1889 urb
= alloc_ctrl_urb(hdev
, skb
);
1891 /* When the 0xfc01 command is issued to boot into
1892 * the operational firmware, it will actually not
1893 * send a command complete event. To keep the flow
1894 * control working inject that event here.
1896 if (opcode
== 0xfc01)
1897 inject_cmd_complete(hdev
, opcode
);
1899 urb
= alloc_ctrl_urb(hdev
, skb
);
1902 return PTR_ERR(urb
);
1904 hdev
->stat
.cmd_tx
++;
1905 return submit_or_queue_tx_urb(hdev
, urb
);
1907 case HCI_ACLDATA_PKT
:
1908 urb
= alloc_bulk_urb(hdev
, skb
);
1910 return PTR_ERR(urb
);
1912 hdev
->stat
.acl_tx
++;
1913 return submit_or_queue_tx_urb(hdev
, urb
);
1915 case HCI_SCODATA_PKT
:
1916 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
1919 urb
= alloc_isoc_urb(hdev
, skb
);
1921 return PTR_ERR(urb
);
1923 hdev
->stat
.sco_tx
++;
1924 return submit_tx_urb(hdev
, urb
);
1930 static int btusb_intel_secure_send(struct hci_dev
*hdev
, u8 fragment_type
,
1931 u32 plen
, const void *param
)
1934 struct sk_buff
*skb
;
1935 u8 cmd_param
[253], fragment_len
= (plen
> 252) ? 252 : plen
;
1937 cmd_param
[0] = fragment_type
;
1938 memcpy(cmd_param
+ 1, param
, fragment_len
);
1940 skb
= __hci_cmd_sync(hdev
, 0xfc09, fragment_len
+ 1,
1941 cmd_param
, HCI_INIT_TIMEOUT
);
1943 return PTR_ERR(skb
);
1947 plen
-= fragment_len
;
1948 param
+= fragment_len
;
1954 static void btusb_intel_version_info(struct hci_dev
*hdev
,
1955 struct intel_version
*ver
)
1957 const char *variant
;
1959 switch (ver
->fw_variant
) {
1961 variant
= "Bootloader";
1964 variant
= "Firmware";
1970 BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev
->name
,
1971 variant
, ver
->fw_revision
>> 4, ver
->fw_revision
& 0x0f,
1972 ver
->fw_build_num
, ver
->fw_build_ww
, 2000 + ver
->fw_build_yy
);
1975 static int btusb_setup_intel_new(struct hci_dev
*hdev
)
1977 static const u8 reset_param
[] = { 0x00, 0x01, 0x00, 0x01,
1978 0x00, 0x08, 0x04, 0x00 };
1979 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1980 struct sk_buff
*skb
;
1981 struct intel_version
*ver
;
1982 struct intel_boot_params
*params
;
1983 const struct firmware
*fw
;
1986 ktime_t calltime
, delta
, rettime
;
1987 unsigned long long duration
;
1990 BT_DBG("%s", hdev
->name
);
1992 calltime
= ktime_get();
1994 /* Read the Intel version information to determine if the device
1995 * is in bootloader mode or if it already has operational firmware
1998 skb
= __hci_cmd_sync(hdev
, 0xfc05, 0, NULL
, HCI_INIT_TIMEOUT
);
2000 BT_ERR("%s: Reading Intel version information failed (%ld)",
2001 hdev
->name
, PTR_ERR(skb
));
2002 return PTR_ERR(skb
);
2005 if (skb
->len
!= sizeof(*ver
)) {
2006 BT_ERR("%s: Intel version event size mismatch", hdev
->name
);
2011 ver
= (struct intel_version
*)skb
->data
;
2013 BT_ERR("%s: Intel version command failure (%02x)",
2014 hdev
->name
, ver
->status
);
2015 err
= -bt_to_errno(ver
->status
);
2020 /* The hardware platform number has a fixed value of 0x37 and
2021 * for now only accept this single value.
2023 if (ver
->hw_platform
!= 0x37) {
2024 BT_ERR("%s: Unsupported Intel hardware platform (%u)",
2025 hdev
->name
, ver
->hw_platform
);
2030 /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
2031 * supported by this firmware loading method. This check has been
2032 * put in place to ensure correct forward compatibility options
2033 * when newer hardware variants come along.
2035 if (ver
->hw_variant
!= 0x0b) {
2036 BT_ERR("%s: Unsupported Intel hardware variant (%u)",
2037 hdev
->name
, ver
->hw_variant
);
2042 btusb_intel_version_info(hdev
, ver
);
2044 /* The firmware variant determines if the device is in bootloader
2045 * mode or is running operational firmware. The value 0x06 identifies
2046 * the bootloader and the value 0x23 identifies the operational
2049 * When the operational firmware is already present, then only
2050 * the check for valid Bluetooth device address is needed. This
2051 * determines if the device will be added as configured or
2052 * unconfigured controller.
2054 * It is not possible to use the Secure Boot Parameters in this
2055 * case since that command is only available in bootloader mode.
2057 if (ver
->fw_variant
== 0x23) {
2059 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2060 btusb_check_bdaddr_intel(hdev
);
2064 /* If the device is not in bootloader mode, then the only possible
2065 * choice is to return an error and abort the device initialization.
2067 if (ver
->fw_variant
!= 0x06) {
2068 BT_ERR("%s: Unsupported Intel firmware variant (%u)",
2069 hdev
->name
, ver
->fw_variant
);
2076 /* Read the secure boot parameters to identify the operating
2077 * details of the bootloader.
2079 skb
= __hci_cmd_sync(hdev
, 0xfc0d, 0, NULL
, HCI_INIT_TIMEOUT
);
2081 BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
2082 hdev
->name
, PTR_ERR(skb
));
2083 return PTR_ERR(skb
);
2086 if (skb
->len
!= sizeof(*params
)) {
2087 BT_ERR("%s: Intel boot parameters size mismatch", hdev
->name
);
2092 params
= (struct intel_boot_params
*)skb
->data
;
2093 if (params
->status
) {
2094 BT_ERR("%s: Intel boot parameters command failure (%02x)",
2095 hdev
->name
, params
->status
);
2096 err
= -bt_to_errno(params
->status
);
2101 BT_INFO("%s: Device revision is %u", hdev
->name
,
2102 le16_to_cpu(params
->dev_revid
));
2104 BT_INFO("%s: Secure boot is %s", hdev
->name
,
2105 params
->secure_boot
? "enabled" : "disabled");
2107 BT_INFO("%s: Minimum firmware build %u week %u %u", hdev
->name
,
2108 params
->min_fw_build_nn
, params
->min_fw_build_cw
,
2109 2000 + params
->min_fw_build_yy
);
2111 /* It is required that every single firmware fragment is acknowledged
2112 * with a command complete event. If the boot parameters indicate
2113 * that this bootloader does not send them, then abort the setup.
2115 if (params
->limited_cce
!= 0x00) {
2116 BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
2117 hdev
->name
, params
->limited_cce
);
2122 /* If the OTP has no valid Bluetooth device address, then there will
2123 * also be no valid address for the operational firmware.
2125 if (!bacmp(¶ms
->otp_bdaddr
, BDADDR_ANY
)) {
2126 BT_INFO("%s: No device address configured", hdev
->name
);
2127 set_bit(HCI_QUIRK_INVALID_BDADDR
, &hdev
->quirks
);
2130 /* With this Intel bootloader only the hardware variant and device
2131 * revision information are used to select the right firmware.
2133 * Currently this bootloader support is limited to hardware variant
2134 * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
2136 snprintf(fwname
, sizeof(fwname
), "intel/ibt-11-%u.sfi",
2137 le16_to_cpu(params
->dev_revid
));
2139 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2141 BT_ERR("%s: Failed to load Intel firmware file (%d)",
2147 BT_INFO("%s: Found device firmware: %s", hdev
->name
, fwname
);
2151 if (fw
->size
< 644) {
2152 BT_ERR("%s: Invalid size of firmware file (%zu)",
2153 hdev
->name
, fw
->size
);
2158 set_bit(BTUSB_DOWNLOADING
, &data
->flags
);
2160 /* Start the firmware download transaction with the Init fragment
2161 * represented by the 128 bytes of CSS header.
2163 err
= btusb_intel_secure_send(hdev
, 0x00, 128, fw
->data
);
2165 BT_ERR("%s: Failed to send firmware header (%d)",
2170 /* Send the 256 bytes of public key information from the firmware
2171 * as the PKey fragment.
2173 err
= btusb_intel_secure_send(hdev
, 0x03, 256, fw
->data
+ 128);
2175 BT_ERR("%s: Failed to send firmware public key (%d)",
2180 /* Send the 256 bytes of signature information from the firmware
2181 * as the Sign fragment.
2183 err
= btusb_intel_secure_send(hdev
, 0x02, 256, fw
->data
+ 388);
2185 BT_ERR("%s: Failed to send firmware signature (%d)",
2190 fw_ptr
= fw
->data
+ 644;
2192 while (fw_ptr
- fw
->data
< fw
->size
) {
2193 struct hci_command_hdr
*cmd
= (void *)fw_ptr
;
2196 cmd_len
= sizeof(*cmd
) + cmd
->plen
;
2198 /* Send each command from the firmware data buffer as
2199 * a single Data fragment.
2201 err
= btusb_intel_secure_send(hdev
, 0x01, cmd_len
, fw_ptr
);
2203 BT_ERR("%s: Failed to send firmware data (%d)",
2211 set_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
);
2213 BT_INFO("%s: Waiting for firmware download to complete", hdev
->name
);
2215 /* Before switching the device into operational mode and with that
2216 * booting the loaded firmware, wait for the bootloader notification
2217 * that all fragments have been successfully received.
2219 * When the event processing receives the notification, then the
2220 * BTUSB_DOWNLOADING flag will be cleared.
2222 * The firmware loading should not take longer than 5 seconds
2223 * and thus just timeout if that happens and fail the setup
2226 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_DOWNLOADING
,
2228 msecs_to_jiffies(5000));
2230 BT_ERR("%s: Firmware loading interrupted", hdev
->name
);
2236 BT_ERR("%s: Firmware loading timeout", hdev
->name
);
2241 if (test_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
)) {
2242 BT_ERR("%s: Firmware loading failed", hdev
->name
);
2247 rettime
= ktime_get();
2248 delta
= ktime_sub(rettime
, calltime
);
2249 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2251 BT_INFO("%s: Firmware loaded in %llu usecs", hdev
->name
, duration
);
2254 release_firmware(fw
);
2259 calltime
= ktime_get();
2261 set_bit(BTUSB_BOOTING
, &data
->flags
);
2263 skb
= __hci_cmd_sync(hdev
, 0xfc01, sizeof(reset_param
), reset_param
,
2266 return PTR_ERR(skb
);
2270 /* The bootloader will not indicate when the device is ready. This
2271 * is done by the operational firmware sending bootup notification.
2273 * Booting into operational firmware should not take longer than
2274 * 1 second. However if that happens, then just fail the setup
2275 * since something went wrong.
2277 BT_INFO("%s: Waiting for device to boot", hdev
->name
);
2279 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_BOOTING
,
2281 msecs_to_jiffies(1000));
2284 BT_ERR("%s: Device boot interrupted", hdev
->name
);
2289 BT_ERR("%s: Device boot timeout", hdev
->name
);
2293 rettime
= ktime_get();
2294 delta
= ktime_sub(rettime
, calltime
);
2295 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2297 BT_INFO("%s: Device booted in %llu usecs", hdev
->name
, duration
);
2299 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2304 static void btusb_hw_error_intel(struct hci_dev
*hdev
, u8 code
)
2306 struct sk_buff
*skb
;
2309 BT_ERR("%s: Hardware error 0x%2.2x", hdev
->name
, code
);
2311 skb
= __hci_cmd_sync(hdev
, HCI_OP_RESET
, 0, NULL
, HCI_INIT_TIMEOUT
);
2313 BT_ERR("%s: Reset after hardware error failed (%ld)",
2314 hdev
->name
, PTR_ERR(skb
));
2319 skb
= __hci_cmd_sync(hdev
, 0xfc22, 1, &type
, HCI_INIT_TIMEOUT
);
2321 BT_ERR("%s: Retrieving Intel exception info failed (%ld)",
2322 hdev
->name
, PTR_ERR(skb
));
2326 if (skb
->len
!= 13) {
2327 BT_ERR("%s: Exception info size mismatch", hdev
->name
);
2332 if (skb
->data
[0] != 0x00) {
2333 BT_ERR("%s: Exception info command failure (%02x)",
2334 hdev
->name
, skb
->data
[0]);
2339 BT_ERR("%s: Exception info %s", hdev
->name
, (char *)(skb
->data
+ 1));
2344 static int btusb_set_bdaddr_intel(struct hci_dev
*hdev
, const bdaddr_t
*bdaddr
)
2346 struct sk_buff
*skb
;
2349 skb
= __hci_cmd_sync(hdev
, 0xfc31, 6, bdaddr
, HCI_INIT_TIMEOUT
);
2352 BT_ERR("%s: changing Intel device address failed (%ld)",
2361 static int btusb_shutdown_intel(struct hci_dev
*hdev
)
2363 struct sk_buff
*skb
;
2366 /* Some platforms have an issue with BT LED when the interface is
2367 * down or BT radio is turned off, which takes 5 seconds to BT LED
2368 * goes off. This command turns off the BT LED immediately.
2370 skb
= __hci_cmd_sync(hdev
, 0xfc3f, 0, NULL
, HCI_INIT_TIMEOUT
);
2373 BT_ERR("%s: turning off Intel device LED failed (%ld)",
2382 static int btusb_set_bdaddr_marvell(struct hci_dev
*hdev
,
2383 const bdaddr_t
*bdaddr
)
2385 struct sk_buff
*skb
;
2390 buf
[1] = sizeof(bdaddr_t
);
2391 memcpy(buf
+ 2, bdaddr
, sizeof(bdaddr_t
));
2393 skb
= __hci_cmd_sync(hdev
, 0xfc22, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2396 BT_ERR("%s: changing Marvell device address failed (%ld)",
2405 static const struct {
2408 } bcm_subver_table
[] = {
2409 { 0x210b, "BCM43142A0" }, /* 001.001.011 */
2410 { 0x2112, "BCM4314A0" }, /* 001.001.018 */
2411 { 0x2118, "BCM20702A0" }, /* 001.001.024 */
2412 { 0x2126, "BCM4335A0" }, /* 001.001.038 */
2413 { 0x220e, "BCM20702A1" }, /* 001.002.014 */
2414 { 0x230f, "BCM4354A2" }, /* 001.003.015 */
2415 { 0x4106, "BCM4335B0" }, /* 002.001.006 */
2416 { 0x410e, "BCM20702B0" }, /* 002.001.014 */
2417 { 0x6109, "BCM4335C0" }, /* 003.001.009 */
2418 { 0x610c, "BCM4354" }, /* 003.001.012 */
2422 #define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
2424 static int btusb_setup_bcm_patchram(struct hci_dev
*hdev
)
2426 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2427 struct usb_device
*udev
= data
->udev
;
2429 const struct firmware
*fw
;
2432 const struct hci_command_hdr
*cmd
;
2433 const u8
*cmd_param
;
2434 u16 opcode
, subver
, rev
;
2435 const char *hw_name
= NULL
;
2436 struct sk_buff
*skb
;
2437 struct hci_rp_read_local_version
*ver
;
2438 struct hci_rp_read_bd_addr
*bda
;
2443 skb
= __hci_cmd_sync(hdev
, HCI_OP_RESET
, 0, NULL
, HCI_INIT_TIMEOUT
);
2446 BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev
->name
, ret
);
2451 /* Read Local Version Info */
2452 skb
= btusb_read_local_version(hdev
);
2454 return PTR_ERR(skb
);
2456 ver
= (struct hci_rp_read_local_version
*)skb
->data
;
2457 rev
= le16_to_cpu(ver
->hci_rev
);
2458 subver
= le16_to_cpu(ver
->lmp_subver
);
2461 /* Read Verbose Config Version Info */
2462 skb
= __hci_cmd_sync(hdev
, 0xfc79, 0, NULL
, HCI_INIT_TIMEOUT
);
2465 BT_ERR("%s: BCM: Read Verbose Version failed (%ld)",
2470 if (skb
->len
!= 7) {
2471 BT_ERR("%s: BCM: Read Verbose Version event length mismatch",
2477 BT_INFO("%s: BCM: chip id %u", hdev
->name
, skb
->data
[1]);
2480 for (i
= 0; bcm_subver_table
[i
].name
; i
++) {
2481 if (subver
== bcm_subver_table
[i
].subver
) {
2482 hw_name
= bcm_subver_table
[i
].name
;
2487 BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev
->name
,
2488 hw_name
? : "BCM", (subver
& 0x7000) >> 13,
2489 (subver
& 0x1f00) >> 8, (subver
& 0x00ff), rev
& 0x0fff);
2491 snprintf(fw_name
, sizeof(fw_name
), "brcm/%s-%4.4x-%4.4x.hcd",
2493 le16_to_cpu(udev
->descriptor
.idVendor
),
2494 le16_to_cpu(udev
->descriptor
.idProduct
));
2496 ret
= request_firmware(&fw
, fw_name
, &hdev
->dev
);
2498 BT_INFO("%s: BCM: patch %s not found", hdev
->name
, fw_name
);
2502 /* Start Download */
2503 skb
= __hci_cmd_sync(hdev
, 0xfc2e, 0, NULL
, HCI_INIT_TIMEOUT
);
2506 BT_ERR("%s: BCM: Download Minidrv command failed (%ld)",
2512 /* 50 msec delay after Download Minidrv completes */
2518 while (fw_size
>= sizeof(*cmd
)) {
2519 cmd
= (struct hci_command_hdr
*)fw_ptr
;
2520 fw_ptr
+= sizeof(*cmd
);
2521 fw_size
-= sizeof(*cmd
);
2523 if (fw_size
< cmd
->plen
) {
2524 BT_ERR("%s: BCM: patch %s is corrupted",
2525 hdev
->name
, fw_name
);
2531 fw_ptr
+= cmd
->plen
;
2532 fw_size
-= cmd
->plen
;
2534 opcode
= le16_to_cpu(cmd
->opcode
);
2536 skb
= __hci_cmd_sync(hdev
, opcode
, cmd
->plen
, cmd_param
,
2540 BT_ERR("%s: BCM: patch command %04x failed (%ld)",
2541 hdev
->name
, opcode
, ret
);
2547 /* 250 msec delay after Launch Ram completes */
2552 skb
= __hci_cmd_sync(hdev
, HCI_OP_RESET
, 0, NULL
, HCI_INIT_TIMEOUT
);
2555 BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev
->name
, ret
);
2560 /* Read Local Version Info */
2561 skb
= btusb_read_local_version(hdev
);
2567 ver
= (struct hci_rp_read_local_version
*)skb
->data
;
2568 rev
= le16_to_cpu(ver
->hci_rev
);
2569 subver
= le16_to_cpu(ver
->lmp_subver
);
2572 BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev
->name
,
2573 hw_name
? : "BCM", (subver
& 0x7000) >> 13,
2574 (subver
& 0x1f00) >> 8, (subver
& 0x00ff), rev
& 0x0fff);
2576 /* Read BD Address */
2577 skb
= __hci_cmd_sync(hdev
, HCI_OP_READ_BD_ADDR
, 0, NULL
,
2581 BT_ERR("%s: HCI_OP_READ_BD_ADDR failed (%ld)",
2586 if (skb
->len
!= sizeof(*bda
)) {
2587 BT_ERR("%s: HCI_OP_READ_BD_ADDR event length mismatch",
2594 bda
= (struct hci_rp_read_bd_addr
*)skb
->data
;
2596 BT_ERR("%s: HCI_OP_READ_BD_ADDR error status (%02x)",
2597 hdev
->name
, bda
->status
);
2599 ret
= -bt_to_errno(bda
->status
);
2603 /* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
2604 * with no configured address.
2606 if (!bacmp(&bda
->bdaddr
, BDADDR_BCM20702A0
)) {
2607 BT_INFO("%s: BCM: using default device address (%pMR)",
2608 hdev
->name
, &bda
->bdaddr
);
2609 set_bit(HCI_QUIRK_INVALID_BDADDR
, &hdev
->quirks
);
2615 release_firmware(fw
);
2620 static int btusb_set_bdaddr_bcm(struct hci_dev
*hdev
, const bdaddr_t
*bdaddr
)
2622 struct sk_buff
*skb
;
2625 skb
= __hci_cmd_sync(hdev
, 0xfc01, 6, bdaddr
, HCI_INIT_TIMEOUT
);
2628 BT_ERR("%s: BCM: Change address command failed (%ld)",
2637 static int btusb_set_bdaddr_ath3012(struct hci_dev
*hdev
,
2638 const bdaddr_t
*bdaddr
)
2640 struct sk_buff
*skb
;
2647 buf
[3] = sizeof(bdaddr_t
);
2648 memcpy(buf
+ 4, bdaddr
, sizeof(bdaddr_t
));
2650 skb
= __hci_cmd_sync(hdev
, 0xfc0b, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2653 BT_ERR("%s: Change address command failed (%ld)",
2662 #define QCA_DFU_PACKET_LEN 4096
2664 #define QCA_GET_TARGET_VERSION 0x09
2665 #define QCA_CHECK_STATUS 0x05
2666 #define QCA_DFU_DOWNLOAD 0x01
2668 #define QCA_SYSCFG_UPDATED 0x40
2669 #define QCA_PATCH_UPDATED 0x80
2670 #define QCA_DFU_TIMEOUT 3000
2672 struct qca_version
{
2674 __le32 patch_version
;
2680 struct qca_rampatch_version
{
2682 __le16 patch_version
;
2685 struct qca_device_info
{
2687 u8 rampatch_hdr
; /* length of header in rampatch */
2688 u8 nvm_hdr
; /* length of header in NVM */
2689 u8 ver_offset
; /* offset of version structure in rampatch */
2692 static const struct qca_device_info qca_devices_table
[] = {
2693 { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
2694 { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
2695 { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
2696 { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
2697 { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
2700 static int btusb_qca_send_vendor_req(struct hci_dev
*hdev
, u8 request
,
2701 void *data
, u16 size
)
2703 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2704 struct usb_device
*udev
= btdata
->udev
;
2708 buf
= kmalloc(size
, GFP_KERNEL
);
2712 /* Found some of USB hosts have IOT issues with ours so that we should
2713 * not wait until HCI layer is ready.
2715 pipe
= usb_rcvctrlpipe(udev
, 0);
2716 err
= usb_control_msg(udev
, pipe
, request
, USB_TYPE_VENDOR
| USB_DIR_IN
,
2717 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2719 BT_ERR("%s: Failed to access otp area (%d)", hdev
->name
, err
);
2723 memcpy(data
, buf
, size
);
2731 static int btusb_setup_qca_download_fw(struct hci_dev
*hdev
,
2732 const struct firmware
*firmware
,
2735 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2736 struct usb_device
*udev
= btdata
->udev
;
2737 size_t count
, size
, sent
= 0;
2741 buf
= kmalloc(QCA_DFU_PACKET_LEN
, GFP_KERNEL
);
2745 count
= firmware
->size
;
2747 size
= min_t(size_t, count
, hdr_size
);
2748 memcpy(buf
, firmware
->data
, size
);
2750 /* USB patches should go down to controller through USB path
2751 * because binary format fits to go down through USB channel.
2752 * USB control path is for patching headers and USB bulk is for
2755 pipe
= usb_sndctrlpipe(udev
, 0);
2756 err
= usb_control_msg(udev
, pipe
, QCA_DFU_DOWNLOAD
, USB_TYPE_VENDOR
,
2757 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2759 BT_ERR("%s: Failed to send headers (%d)", hdev
->name
, err
);
2767 size
= min_t(size_t, count
, QCA_DFU_PACKET_LEN
);
2769 memcpy(buf
, firmware
->data
+ sent
, size
);
2771 pipe
= usb_sndbulkpipe(udev
, 0x02);
2772 err
= usb_bulk_msg(udev
, pipe
, buf
, size
, &len
,
2775 BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
2776 hdev
->name
, sent
, firmware
->size
, err
);
2781 BT_ERR("%s: Failed to get bulk buffer", hdev
->name
);
2795 static int btusb_setup_qca_load_rampatch(struct hci_dev
*hdev
,
2796 struct qca_version
*ver
,
2797 const struct qca_device_info
*info
)
2799 struct qca_rampatch_version
*rver
;
2800 const struct firmware
*fw
;
2801 u32 ver_rom
, ver_patch
;
2802 u16 rver_rom
, rver_patch
;
2806 ver_rom
= le32_to_cpu(ver
->rom_version
);
2807 ver_patch
= le32_to_cpu(ver
->patch_version
);
2809 snprintf(fwname
, sizeof(fwname
), "qca/rampatch_usb_%08x.bin", ver_rom
);
2811 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2813 BT_ERR("%s: failed to request rampatch file: %s (%d)",
2814 hdev
->name
, fwname
, err
);
2818 BT_INFO("%s: using rampatch file: %s", hdev
->name
, fwname
);
2820 rver
= (struct qca_rampatch_version
*)(fw
->data
+ info
->ver_offset
);
2821 rver_rom
= le16_to_cpu(rver
->rom_version
);
2822 rver_patch
= le16_to_cpu(rver
->patch_version
);
2824 BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
2825 "build 0x%x", hdev
->name
, rver_rom
, rver_patch
, ver_rom
,
2828 if (rver_rom
!= ver_rom
|| rver_patch
<= ver_patch
) {
2829 BT_ERR("%s: rampatch file version did not match with firmware",
2835 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->rampatch_hdr
);
2838 release_firmware(fw
);
2843 static int btusb_setup_qca_load_nvm(struct hci_dev
*hdev
,
2844 struct qca_version
*ver
,
2845 const struct qca_device_info
*info
)
2847 const struct firmware
*fw
;
2851 snprintf(fwname
, sizeof(fwname
), "qca/nvm_usb_%08x.bin",
2852 le32_to_cpu(ver
->rom_version
));
2854 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2856 BT_ERR("%s: failed to request NVM file: %s (%d)",
2857 hdev
->name
, fwname
, err
);
2861 BT_INFO("%s: using NVM file: %s", hdev
->name
, fwname
);
2863 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->nvm_hdr
);
2865 release_firmware(fw
);
2870 static int btusb_setup_qca(struct hci_dev
*hdev
)
2872 const struct qca_device_info
*info
= NULL
;
2873 struct qca_version ver
;
2878 err
= btusb_qca_send_vendor_req(hdev
, QCA_GET_TARGET_VERSION
, &ver
,
2883 ver_rom
= le32_to_cpu(ver
.rom_version
);
2884 for (i
= 0; i
< ARRAY_SIZE(qca_devices_table
); i
++) {
2885 if (ver_rom
== qca_devices_table
[i
].rom_version
)
2886 info
= &qca_devices_table
[i
];
2889 BT_ERR("%s: don't support firmware rome 0x%x", hdev
->name
,
2894 err
= btusb_qca_send_vendor_req(hdev
, QCA_CHECK_STATUS
, &status
,
2899 if (!(status
& QCA_PATCH_UPDATED
)) {
2900 err
= btusb_setup_qca_load_rampatch(hdev
, &ver
, info
);
2905 if (!(status
& QCA_SYSCFG_UPDATED
)) {
2906 err
= btusb_setup_qca_load_nvm(hdev
, &ver
, info
);
2914 static int btusb_probe(struct usb_interface
*intf
,
2915 const struct usb_device_id
*id
)
2917 struct usb_endpoint_descriptor
*ep_desc
;
2918 struct btusb_data
*data
;
2919 struct hci_dev
*hdev
;
2922 BT_DBG("intf %p id %p", intf
, id
);
2924 /* interface numbers are hardcoded in the spec */
2925 if (intf
->cur_altsetting
->desc
.bInterfaceNumber
!= 0)
2928 if (!id
->driver_info
) {
2929 const struct usb_device_id
*match
;
2931 match
= usb_match_id(intf
, blacklist_table
);
2936 if (id
->driver_info
== BTUSB_IGNORE
)
2939 if (id
->driver_info
& BTUSB_ATH3012
) {
2940 struct usb_device
*udev
= interface_to_usbdev(intf
);
2942 /* Old firmware would otherwise let ath3k driver load
2943 * patch and sysconfig files */
2944 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) <= 0x0001)
2948 data
= devm_kzalloc(&intf
->dev
, sizeof(*data
), GFP_KERNEL
);
2952 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
2953 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
2955 if (!data
->intr_ep
&& usb_endpoint_is_int_in(ep_desc
)) {
2956 data
->intr_ep
= ep_desc
;
2960 if (!data
->bulk_tx_ep
&& usb_endpoint_is_bulk_out(ep_desc
)) {
2961 data
->bulk_tx_ep
= ep_desc
;
2965 if (!data
->bulk_rx_ep
&& usb_endpoint_is_bulk_in(ep_desc
)) {
2966 data
->bulk_rx_ep
= ep_desc
;
2971 if (!data
->intr_ep
|| !data
->bulk_tx_ep
|| !data
->bulk_rx_ep
)
2974 if (id
->driver_info
& BTUSB_AMP
) {
2975 data
->cmdreq_type
= USB_TYPE_CLASS
| 0x01;
2976 data
->cmdreq
= 0x2b;
2978 data
->cmdreq_type
= USB_TYPE_CLASS
;
2979 data
->cmdreq
= 0x00;
2982 data
->udev
= interface_to_usbdev(intf
);
2985 INIT_WORK(&data
->work
, btusb_work
);
2986 INIT_WORK(&data
->waker
, btusb_waker
);
2987 init_usb_anchor(&data
->deferred
);
2988 init_usb_anchor(&data
->tx_anchor
);
2989 spin_lock_init(&data
->txlock
);
2991 init_usb_anchor(&data
->intr_anchor
);
2992 init_usb_anchor(&data
->bulk_anchor
);
2993 init_usb_anchor(&data
->isoc_anchor
);
2994 spin_lock_init(&data
->rxlock
);
2996 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
2997 data
->recv_event
= btusb_recv_event_intel
;
2998 data
->recv_bulk
= btusb_recv_bulk_intel
;
2999 set_bit(BTUSB_BOOTLOADER
, &data
->flags
);
3001 data
->recv_event
= hci_recv_frame
;
3002 data
->recv_bulk
= btusb_recv_bulk
;
3005 hdev
= hci_alloc_dev();
3009 hdev
->bus
= HCI_USB
;
3010 hci_set_drvdata(hdev
, data
);
3012 if (id
->driver_info
& BTUSB_AMP
)
3013 hdev
->dev_type
= HCI_AMP
;
3015 hdev
->dev_type
= HCI_BREDR
;
3019 SET_HCIDEV_DEV(hdev
, &intf
->dev
);
3021 hdev
->open
= btusb_open
;
3022 hdev
->close
= btusb_close
;
3023 hdev
->flush
= btusb_flush
;
3024 hdev
->send
= btusb_send_frame
;
3025 hdev
->notify
= btusb_notify
;
3027 if (id
->driver_info
& BTUSB_BCM92035
)
3028 hdev
->setup
= btusb_setup_bcm92035
;
3030 if (id
->driver_info
& BTUSB_BCM_PATCHRAM
) {
3031 hdev
->setup
= btusb_setup_bcm_patchram
;
3032 hdev
->set_bdaddr
= btusb_set_bdaddr_bcm
;
3033 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
3036 if (id
->driver_info
& BTUSB_INTEL
) {
3037 hdev
->setup
= btusb_setup_intel
;
3038 hdev
->shutdown
= btusb_shutdown_intel
;
3039 hdev
->set_bdaddr
= btusb_set_bdaddr_intel
;
3040 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
3041 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
3044 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
3045 hdev
->send
= btusb_send_frame_intel
;
3046 hdev
->setup
= btusb_setup_intel_new
;
3047 hdev
->hw_error
= btusb_hw_error_intel
;
3048 hdev
->set_bdaddr
= btusb_set_bdaddr_intel
;
3049 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
3052 if (id
->driver_info
& BTUSB_MARVELL
)
3053 hdev
->set_bdaddr
= btusb_set_bdaddr_marvell
;
3055 if (id
->driver_info
& BTUSB_SWAVE
) {
3056 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE
, &hdev
->quirks
);
3057 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS
, &hdev
->quirks
);
3060 if (id
->driver_info
& BTUSB_INTEL_BOOT
)
3061 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
3063 if (id
->driver_info
& BTUSB_ATH3012
) {
3064 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
3065 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
3066 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
3069 if (id
->driver_info
& BTUSB_QCA_ROME
) {
3070 data
->setup_on_usb
= btusb_setup_qca
;
3071 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
3074 if (id
->driver_info
& BTUSB_AMP
) {
3075 /* AMP controllers do not support SCO packets */
3078 /* Interface numbers are hardcoded in the specification */
3079 data
->isoc
= usb_ifnum_to_if(data
->udev
, 1);
3083 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
3085 if (force_scofix
|| id
->driver_info
& BTUSB_WRONG_SCO_MTU
) {
3086 if (!disable_scofix
)
3087 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE
, &hdev
->quirks
);
3090 if (id
->driver_info
& BTUSB_BROKEN_ISOC
)
3093 if (id
->driver_info
& BTUSB_DIGIANSWER
) {
3094 data
->cmdreq_type
= USB_TYPE_VENDOR
;
3095 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
3098 if (id
->driver_info
& BTUSB_CSR
) {
3099 struct usb_device
*udev
= data
->udev
;
3100 u16 bcdDevice
= le16_to_cpu(udev
->descriptor
.bcdDevice
);
3102 /* Old firmware would otherwise execute USB reset */
3103 if (bcdDevice
< 0x117)
3104 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
3106 /* Fake CSR devices with broken commands */
3107 if (bcdDevice
<= 0x100)
3108 hdev
->setup
= btusb_setup_csr
;
3110 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
3113 if (id
->driver_info
& BTUSB_SNIFFER
) {
3114 struct usb_device
*udev
= data
->udev
;
3116 /* New sniffer firmware has crippled HCI interface */
3117 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) > 0x997)
3118 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
3121 if (id
->driver_info
& BTUSB_INTEL_BOOT
) {
3122 /* A bug in the bootloader causes that interrupt interface is
3123 * only enabled after receiving SetInterface(0, AltSetting=0).
3125 err
= usb_set_interface(data
->udev
, 0, 0);
3127 BT_ERR("failed to set interface 0, alt 0 %d", err
);
3134 err
= usb_driver_claim_interface(&btusb_driver
,
3142 err
= hci_register_dev(hdev
);
3148 usb_set_intfdata(intf
, data
);
3153 static void btusb_disconnect(struct usb_interface
*intf
)
3155 struct btusb_data
*data
= usb_get_intfdata(intf
);
3156 struct hci_dev
*hdev
;
3158 BT_DBG("intf %p", intf
);
3164 usb_set_intfdata(data
->intf
, NULL
);
3167 usb_set_intfdata(data
->isoc
, NULL
);
3169 hci_unregister_dev(hdev
);
3171 if (intf
== data
->isoc
)
3172 usb_driver_release_interface(&btusb_driver
, data
->intf
);
3173 else if (data
->isoc
)
3174 usb_driver_release_interface(&btusb_driver
, data
->isoc
);
3180 static int btusb_suspend(struct usb_interface
*intf
, pm_message_t message
)
3182 struct btusb_data
*data
= usb_get_intfdata(intf
);
3184 BT_DBG("intf %p", intf
);
3186 if (data
->suspend_count
++)
3189 spin_lock_irq(&data
->txlock
);
3190 if (!(PMSG_IS_AUTO(message
) && data
->tx_in_flight
)) {
3191 set_bit(BTUSB_SUSPENDING
, &data
->flags
);
3192 spin_unlock_irq(&data
->txlock
);
3194 spin_unlock_irq(&data
->txlock
);
3195 data
->suspend_count
--;
3199 cancel_work_sync(&data
->work
);
3201 btusb_stop_traffic(data
);
3202 usb_kill_anchored_urbs(&data
->tx_anchor
);
3207 static void play_deferred(struct btusb_data
*data
)
3212 while ((urb
= usb_get_from_anchor(&data
->deferred
))) {
3213 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
3217 data
->tx_in_flight
++;
3219 usb_scuttle_anchored_urbs(&data
->deferred
);
3222 static int btusb_resume(struct usb_interface
*intf
)
3224 struct btusb_data
*data
= usb_get_intfdata(intf
);
3225 struct hci_dev
*hdev
= data
->hdev
;
3228 BT_DBG("intf %p", intf
);
3230 if (--data
->suspend_count
)
3233 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
3236 if (test_bit(BTUSB_INTR_RUNNING
, &data
->flags
)) {
3237 err
= btusb_submit_intr_urb(hdev
, GFP_NOIO
);
3239 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
3244 if (test_bit(BTUSB_BULK_RUNNING
, &data
->flags
)) {
3245 err
= btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3247 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
3251 btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3254 if (test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
3255 if (btusb_submit_isoc_urb(hdev
, GFP_NOIO
) < 0)
3256 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
3258 btusb_submit_isoc_urb(hdev
, GFP_NOIO
);
3261 spin_lock_irq(&data
->txlock
);
3262 play_deferred(data
);
3263 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3264 spin_unlock_irq(&data
->txlock
);
3265 schedule_work(&data
->work
);
3270 usb_scuttle_anchored_urbs(&data
->deferred
);
3272 spin_lock_irq(&data
->txlock
);
3273 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3274 spin_unlock_irq(&data
->txlock
);
3280 static struct usb_driver btusb_driver
= {
3282 .probe
= btusb_probe
,
3283 .disconnect
= btusb_disconnect
,
3285 .suspend
= btusb_suspend
,
3286 .resume
= btusb_resume
,
3288 .id_table
= btusb_table
,
3289 .supports_autosuspend
= 1,
3290 .disable_hub_initiated_lpm
= 1,
3293 module_usb_driver(btusb_driver
);
3295 module_param(disable_scofix
, bool, 0644);
3296 MODULE_PARM_DESC(disable_scofix
, "Disable fixup of wrong SCO buffer size");
3298 module_param(force_scofix
, bool, 0644);
3299 MODULE_PARM_DESC(force_scofix
, "Force fixup of wrong SCO buffers size");
3301 module_param(reset
, bool, 0644);
3302 MODULE_PARM_DESC(reset
, "Send HCI reset command on initialization");
3304 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3305 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION
);
3306 MODULE_VERSION(VERSION
);
3307 MODULE_LICENSE("GPL");