3 * Generic Bluetooth USB driver
5 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/module.h>
25 #include <linux/usb.h>
26 #include <linux/firmware.h>
27 #include <asm/unaligned.h>
29 #include <net/bluetooth/bluetooth.h>
30 #include <net/bluetooth/hci_core.h>
38 static bool disable_scofix
;
39 static bool force_scofix
;
41 static bool reset
= true;
43 static struct usb_driver btusb_driver
;
45 #define BTUSB_IGNORE 0x01
46 #define BTUSB_DIGIANSWER 0x02
47 #define BTUSB_CSR 0x04
48 #define BTUSB_SNIFFER 0x08
49 #define BTUSB_BCM92035 0x10
50 #define BTUSB_BROKEN_ISOC 0x20
51 #define BTUSB_WRONG_SCO_MTU 0x40
52 #define BTUSB_ATH3012 0x80
53 #define BTUSB_INTEL 0x100
54 #define BTUSB_INTEL_BOOT 0x200
55 #define BTUSB_BCM_PATCHRAM 0x400
56 #define BTUSB_MARVELL 0x800
57 #define BTUSB_SWAVE 0x1000
58 #define BTUSB_INTEL_NEW 0x2000
59 #define BTUSB_AMP 0x4000
60 #define BTUSB_QCA_ROME 0x8000
61 #define BTUSB_BCM_APPLE 0x10000
62 #define BTUSB_REALTEK 0x20000
63 #define BTUSB_BCM2045 0x40000
64 #define BTUSB_IFNUM_2 0x80000
66 static const struct usb_device_id btusb_table
[] = {
67 /* Generic Bluetooth USB device */
68 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
70 /* Generic Bluetooth AMP device */
71 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info
= BTUSB_AMP
},
73 /* Generic Bluetooth USB interface */
74 { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
76 /* Apple-specific (Broadcom) devices */
77 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
78 .driver_info
= BTUSB_BCM_APPLE
| BTUSB_IFNUM_2
},
80 /* MediaTek MT76x0E */
81 { USB_DEVICE(0x0e8d, 0x763f) },
83 /* Broadcom SoftSailing reporting vendor specific */
84 { USB_DEVICE(0x0a5c, 0x21e1) },
86 /* Apple MacBookPro 7,1 */
87 { USB_DEVICE(0x05ac, 0x8213) },
90 { USB_DEVICE(0x05ac, 0x8215) },
92 /* Apple MacBookPro6,2 */
93 { USB_DEVICE(0x05ac, 0x8218) },
95 /* Apple MacBookAir3,1, MacBookAir3,2 */
96 { USB_DEVICE(0x05ac, 0x821b) },
98 /* Apple MacBookAir4,1 */
99 { USB_DEVICE(0x05ac, 0x821f) },
101 /* Apple MacBookPro8,2 */
102 { USB_DEVICE(0x05ac, 0x821a) },
104 /* Apple MacMini5,1 */
105 { USB_DEVICE(0x05ac, 0x8281) },
107 /* AVM BlueFRITZ! USB v2.0 */
108 { USB_DEVICE(0x057c, 0x3800), .driver_info
= BTUSB_SWAVE
},
110 /* Bluetooth Ultraport Module from IBM */
111 { USB_DEVICE(0x04bf, 0x030a) },
113 /* ALPS Modules with non-standard id */
114 { USB_DEVICE(0x044e, 0x3001) },
115 { USB_DEVICE(0x044e, 0x3002) },
117 /* Ericsson with non-standard id */
118 { USB_DEVICE(0x0bdb, 0x1002) },
120 /* Canyon CN-BTU1 with HID interfaces */
121 { USB_DEVICE(0x0c10, 0x0000) },
123 /* Broadcom BCM20702A0 */
124 { USB_DEVICE(0x413c, 0x8197) },
126 /* Broadcom BCM20702B0 (Dynex/Insignia) */
127 { USB_DEVICE(0x19ff, 0x0239), .driver_info
= BTUSB_BCM_PATCHRAM
},
129 /* Broadcom BCM43142A0 (Foxconn/Lenovo) */
130 { USB_DEVICE(0x105b, 0xe065), .driver_info
= BTUSB_BCM_PATCHRAM
},
132 /* Foxconn - Hon Hai */
133 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
134 .driver_info
= BTUSB_BCM_PATCHRAM
},
136 /* Lite-On Technology - Broadcom based */
137 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
138 .driver_info
= BTUSB_BCM_PATCHRAM
},
140 /* Broadcom devices with vendor specific id */
141 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
142 .driver_info
= BTUSB_BCM_PATCHRAM
},
144 /* ASUSTek Computer - Broadcom based */
145 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
146 .driver_info
= BTUSB_BCM_PATCHRAM
},
148 /* Belkin F8065bf - Broadcom based */
149 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
150 .driver_info
= BTUSB_BCM_PATCHRAM
},
152 /* IMC Networks - Broadcom based */
153 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
154 .driver_info
= BTUSB_BCM_PATCHRAM
},
156 /* Intel Bluetooth USB Bootloader (RAM module) */
157 { USB_DEVICE(0x8087, 0x0a5a),
158 .driver_info
= BTUSB_INTEL_BOOT
| BTUSB_BROKEN_ISOC
},
160 { } /* Terminating entry */
163 MODULE_DEVICE_TABLE(usb
, btusb_table
);
165 static const struct usb_device_id blacklist_table
[] = {
166 /* CSR BlueCore devices */
167 { USB_DEVICE(0x0a12, 0x0001), .driver_info
= BTUSB_CSR
},
169 /* Broadcom BCM2033 without firmware */
170 { USB_DEVICE(0x0a5c, 0x2033), .driver_info
= BTUSB_IGNORE
},
172 /* Broadcom BCM2045 devices */
173 { USB_DEVICE(0x0a5c, 0x2045), .driver_info
= BTUSB_BCM2045
},
175 /* Atheros 3011 with sflash firmware */
176 { USB_DEVICE(0x0489, 0xe027), .driver_info
= BTUSB_IGNORE
},
177 { USB_DEVICE(0x0489, 0xe03d), .driver_info
= BTUSB_IGNORE
},
178 { USB_DEVICE(0x04f2, 0xaff1), .driver_info
= BTUSB_IGNORE
},
179 { USB_DEVICE(0x0930, 0x0215), .driver_info
= BTUSB_IGNORE
},
180 { USB_DEVICE(0x0cf3, 0x3002), .driver_info
= BTUSB_IGNORE
},
181 { USB_DEVICE(0x0cf3, 0xe019), .driver_info
= BTUSB_IGNORE
},
182 { USB_DEVICE(0x13d3, 0x3304), .driver_info
= BTUSB_IGNORE
},
184 /* Atheros AR9285 Malbec with sflash firmware */
185 { USB_DEVICE(0x03f0, 0x311d), .driver_info
= BTUSB_IGNORE
},
187 /* Atheros 3012 with sflash firmware */
188 { USB_DEVICE(0x0489, 0xe04d), .driver_info
= BTUSB_ATH3012
},
189 { USB_DEVICE(0x0489, 0xe04e), .driver_info
= BTUSB_ATH3012
},
190 { USB_DEVICE(0x0489, 0xe056), .driver_info
= BTUSB_ATH3012
},
191 { USB_DEVICE(0x0489, 0xe057), .driver_info
= BTUSB_ATH3012
},
192 { USB_DEVICE(0x0489, 0xe05f), .driver_info
= BTUSB_ATH3012
},
193 { USB_DEVICE(0x0489, 0xe076), .driver_info
= BTUSB_ATH3012
},
194 { USB_DEVICE(0x0489, 0xe078), .driver_info
= BTUSB_ATH3012
},
195 { USB_DEVICE(0x04c5, 0x1330), .driver_info
= BTUSB_ATH3012
},
196 { USB_DEVICE(0x04ca, 0x3004), .driver_info
= BTUSB_ATH3012
},
197 { USB_DEVICE(0x04ca, 0x3005), .driver_info
= BTUSB_ATH3012
},
198 { USB_DEVICE(0x04ca, 0x3006), .driver_info
= BTUSB_ATH3012
},
199 { USB_DEVICE(0x04ca, 0x3007), .driver_info
= BTUSB_ATH3012
},
200 { USB_DEVICE(0x04ca, 0x3008), .driver_info
= BTUSB_ATH3012
},
201 { USB_DEVICE(0x04ca, 0x300b), .driver_info
= BTUSB_ATH3012
},
202 { USB_DEVICE(0x04ca, 0x300d), .driver_info
= BTUSB_ATH3012
},
203 { USB_DEVICE(0x04ca, 0x300f), .driver_info
= BTUSB_ATH3012
},
204 { USB_DEVICE(0x04ca, 0x3010), .driver_info
= BTUSB_ATH3012
},
205 { USB_DEVICE(0x0930, 0x0219), .driver_info
= BTUSB_ATH3012
},
206 { USB_DEVICE(0x0930, 0x021c), .driver_info
= BTUSB_ATH3012
},
207 { USB_DEVICE(0x0930, 0x0220), .driver_info
= BTUSB_ATH3012
},
208 { USB_DEVICE(0x0930, 0x0227), .driver_info
= BTUSB_ATH3012
},
209 { USB_DEVICE(0x0b05, 0x17d0), .driver_info
= BTUSB_ATH3012
},
210 { USB_DEVICE(0x0cf3, 0x0036), .driver_info
= BTUSB_ATH3012
},
211 { USB_DEVICE(0x0cf3, 0x3004), .driver_info
= BTUSB_ATH3012
},
212 { USB_DEVICE(0x0cf3, 0x3008), .driver_info
= BTUSB_ATH3012
},
213 { USB_DEVICE(0x0cf3, 0x311d), .driver_info
= BTUSB_ATH3012
},
214 { USB_DEVICE(0x0cf3, 0x311e), .driver_info
= BTUSB_ATH3012
},
215 { USB_DEVICE(0x0cf3, 0x311f), .driver_info
= BTUSB_ATH3012
},
216 { USB_DEVICE(0x0cf3, 0x3121), .driver_info
= BTUSB_ATH3012
},
217 { USB_DEVICE(0x0cf3, 0x817a), .driver_info
= BTUSB_ATH3012
},
218 { USB_DEVICE(0x0cf3, 0x817b), .driver_info
= BTUSB_ATH3012
},
219 { USB_DEVICE(0x0cf3, 0xe003), .driver_info
= BTUSB_ATH3012
},
220 { USB_DEVICE(0x0cf3, 0xe004), .driver_info
= BTUSB_ATH3012
},
221 { USB_DEVICE(0x0cf3, 0xe005), .driver_info
= BTUSB_ATH3012
},
222 { USB_DEVICE(0x0cf3, 0xe006), .driver_info
= BTUSB_ATH3012
},
223 { USB_DEVICE(0x13d3, 0x3362), .driver_info
= BTUSB_ATH3012
},
224 { USB_DEVICE(0x13d3, 0x3375), .driver_info
= BTUSB_ATH3012
},
225 { USB_DEVICE(0x13d3, 0x3393), .driver_info
= BTUSB_ATH3012
},
226 { USB_DEVICE(0x13d3, 0x3402), .driver_info
= BTUSB_ATH3012
},
227 { USB_DEVICE(0x13d3, 0x3408), .driver_info
= BTUSB_ATH3012
},
228 { USB_DEVICE(0x13d3, 0x3423), .driver_info
= BTUSB_ATH3012
},
229 { USB_DEVICE(0x13d3, 0x3432), .driver_info
= BTUSB_ATH3012
},
230 { USB_DEVICE(0x13d3, 0x3474), .driver_info
= BTUSB_ATH3012
},
232 /* Atheros AR5BBU12 with sflash firmware */
233 { USB_DEVICE(0x0489, 0xe02c), .driver_info
= BTUSB_IGNORE
},
235 /* Atheros AR5BBU12 with sflash firmware */
236 { USB_DEVICE(0x0489, 0xe036), .driver_info
= BTUSB_ATH3012
},
237 { USB_DEVICE(0x0489, 0xe03c), .driver_info
= BTUSB_ATH3012
},
239 /* QCA ROME chipset */
240 { USB_DEVICE(0x0cf3, 0xe007), .driver_info
= BTUSB_QCA_ROME
},
241 { USB_DEVICE(0x0cf3, 0xe300), .driver_info
= BTUSB_QCA_ROME
},
242 { USB_DEVICE(0x0cf3, 0xe360), .driver_info
= BTUSB_QCA_ROME
},
244 /* Broadcom BCM2035 */
245 { USB_DEVICE(0x0a5c, 0x2009), .driver_info
= BTUSB_BCM92035
},
246 { USB_DEVICE(0x0a5c, 0x200a), .driver_info
= BTUSB_WRONG_SCO_MTU
},
247 { USB_DEVICE(0x0a5c, 0x2035), .driver_info
= BTUSB_WRONG_SCO_MTU
},
249 /* Broadcom BCM2045 */
250 { USB_DEVICE(0x0a5c, 0x2039), .driver_info
= BTUSB_WRONG_SCO_MTU
},
251 { USB_DEVICE(0x0a5c, 0x2101), .driver_info
= BTUSB_WRONG_SCO_MTU
},
253 /* IBM/Lenovo ThinkPad with Broadcom chip */
254 { USB_DEVICE(0x0a5c, 0x201e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
255 { USB_DEVICE(0x0a5c, 0x2110), .driver_info
= BTUSB_WRONG_SCO_MTU
},
257 /* HP laptop with Broadcom chip */
258 { USB_DEVICE(0x03f0, 0x171d), .driver_info
= BTUSB_WRONG_SCO_MTU
},
260 /* Dell laptop with Broadcom chip */
261 { USB_DEVICE(0x413c, 0x8126), .driver_info
= BTUSB_WRONG_SCO_MTU
},
263 /* Dell Wireless 370 and 410 devices */
264 { USB_DEVICE(0x413c, 0x8152), .driver_info
= BTUSB_WRONG_SCO_MTU
},
265 { USB_DEVICE(0x413c, 0x8156), .driver_info
= BTUSB_WRONG_SCO_MTU
},
267 /* Belkin F8T012 and F8T013 devices */
268 { USB_DEVICE(0x050d, 0x0012), .driver_info
= BTUSB_WRONG_SCO_MTU
},
269 { USB_DEVICE(0x050d, 0x0013), .driver_info
= BTUSB_WRONG_SCO_MTU
},
271 /* Asus WL-BTD202 device */
272 { USB_DEVICE(0x0b05, 0x1715), .driver_info
= BTUSB_WRONG_SCO_MTU
},
274 /* Kensington Bluetooth USB adapter */
275 { USB_DEVICE(0x047d, 0x105e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
277 /* RTX Telecom based adapters with buggy SCO support */
278 { USB_DEVICE(0x0400, 0x0807), .driver_info
= BTUSB_BROKEN_ISOC
},
279 { USB_DEVICE(0x0400, 0x080a), .driver_info
= BTUSB_BROKEN_ISOC
},
281 /* CONWISE Technology based adapters with buggy SCO support */
282 { USB_DEVICE(0x0e5e, 0x6622), .driver_info
= BTUSB_BROKEN_ISOC
},
284 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
285 { USB_DEVICE(0x1310, 0x0001), .driver_info
= BTUSB_SWAVE
},
287 /* Digianswer devices */
288 { USB_DEVICE(0x08fd, 0x0001), .driver_info
= BTUSB_DIGIANSWER
},
289 { USB_DEVICE(0x08fd, 0x0002), .driver_info
= BTUSB_IGNORE
},
291 /* CSR BlueCore Bluetooth Sniffer */
292 { USB_DEVICE(0x0a12, 0x0002),
293 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
295 /* Frontline ComProbe Bluetooth Sniffer */
296 { USB_DEVICE(0x16d3, 0x0002),
297 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
299 /* Marvell Bluetooth devices */
300 { USB_DEVICE(0x1286, 0x2044), .driver_info
= BTUSB_MARVELL
},
301 { USB_DEVICE(0x1286, 0x2046), .driver_info
= BTUSB_MARVELL
},
303 /* Intel Bluetooth devices */
304 { USB_DEVICE(0x8087, 0x07da), .driver_info
= BTUSB_CSR
},
305 { USB_DEVICE(0x8087, 0x07dc), .driver_info
= BTUSB_INTEL
},
306 { USB_DEVICE(0x8087, 0x0a2a), .driver_info
= BTUSB_INTEL
},
307 { USB_DEVICE(0x8087, 0x0a2b), .driver_info
= BTUSB_INTEL_NEW
},
309 /* Other Intel Bluetooth devices */
310 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
311 .driver_info
= BTUSB_IGNORE
},
313 /* Realtek Bluetooth devices */
314 { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
315 .driver_info
= BTUSB_REALTEK
},
317 /* Additional Realtek 8723AE Bluetooth devices */
318 { USB_DEVICE(0x0930, 0x021d), .driver_info
= BTUSB_REALTEK
},
319 { USB_DEVICE(0x13d3, 0x3394), .driver_info
= BTUSB_REALTEK
},
321 /* Additional Realtek 8723BE Bluetooth devices */
322 { USB_DEVICE(0x0489, 0xe085), .driver_info
= BTUSB_REALTEK
},
323 { USB_DEVICE(0x0489, 0xe08b), .driver_info
= BTUSB_REALTEK
},
324 { USB_DEVICE(0x13d3, 0x3410), .driver_info
= BTUSB_REALTEK
},
325 { USB_DEVICE(0x13d3, 0x3416), .driver_info
= BTUSB_REALTEK
},
326 { USB_DEVICE(0x13d3, 0x3459), .driver_info
= BTUSB_REALTEK
},
328 /* Additional Realtek 8821AE Bluetooth devices */
329 { USB_DEVICE(0x0b05, 0x17dc), .driver_info
= BTUSB_REALTEK
},
330 { USB_DEVICE(0x13d3, 0x3414), .driver_info
= BTUSB_REALTEK
},
331 { USB_DEVICE(0x13d3, 0x3458), .driver_info
= BTUSB_REALTEK
},
332 { USB_DEVICE(0x13d3, 0x3461), .driver_info
= BTUSB_REALTEK
},
333 { USB_DEVICE(0x13d3, 0x3462), .driver_info
= BTUSB_REALTEK
},
335 /* Silicon Wave based devices */
336 { USB_DEVICE(0x0c10, 0x0000), .driver_info
= BTUSB_SWAVE
},
338 { } /* Terminating entry */
341 #define BTUSB_MAX_ISOC_FRAMES 10
343 #define BTUSB_INTR_RUNNING 0
344 #define BTUSB_BULK_RUNNING 1
345 #define BTUSB_ISOC_RUNNING 2
346 #define BTUSB_SUSPENDING 3
347 #define BTUSB_DID_ISO_RESUME 4
348 #define BTUSB_BOOTLOADER 5
349 #define BTUSB_DOWNLOADING 6
350 #define BTUSB_FIRMWARE_LOADED 7
351 #define BTUSB_FIRMWARE_FAILED 8
352 #define BTUSB_BOOTING 9
353 #define BTUSB_RESET_RESUME 10
354 #define BTUSB_DIAG_RUNNING 11
357 struct hci_dev
*hdev
;
358 struct usb_device
*udev
;
359 struct usb_interface
*intf
;
360 struct usb_interface
*isoc
;
361 struct usb_interface
*diag
;
365 struct work_struct work
;
366 struct work_struct waker
;
368 struct usb_anchor deferred
;
369 struct usb_anchor tx_anchor
;
373 struct usb_anchor intr_anchor
;
374 struct usb_anchor bulk_anchor
;
375 struct usb_anchor isoc_anchor
;
376 struct usb_anchor diag_anchor
;
379 struct sk_buff
*evt_skb
;
380 struct sk_buff
*acl_skb
;
381 struct sk_buff
*sco_skb
;
383 struct usb_endpoint_descriptor
*intr_ep
;
384 struct usb_endpoint_descriptor
*bulk_tx_ep
;
385 struct usb_endpoint_descriptor
*bulk_rx_ep
;
386 struct usb_endpoint_descriptor
*isoc_tx_ep
;
387 struct usb_endpoint_descriptor
*isoc_rx_ep
;
388 struct usb_endpoint_descriptor
*diag_tx_ep
;
389 struct usb_endpoint_descriptor
*diag_rx_ep
;
394 unsigned int sco_num
;
398 int (*recv_event
)(struct hci_dev
*hdev
, struct sk_buff
*skb
);
399 int (*recv_bulk
)(struct btusb_data
*data
, void *buffer
, int count
);
401 int (*setup_on_usb
)(struct hci_dev
*hdev
);
404 static inline void btusb_free_frags(struct btusb_data
*data
)
408 spin_lock_irqsave(&data
->rxlock
, flags
);
410 kfree_skb(data
->evt_skb
);
411 data
->evt_skb
= NULL
;
413 kfree_skb(data
->acl_skb
);
414 data
->acl_skb
= NULL
;
416 kfree_skb(data
->sco_skb
);
417 data
->sco_skb
= NULL
;
419 spin_unlock_irqrestore(&data
->rxlock
, flags
);
422 static int btusb_recv_intr(struct btusb_data
*data
, void *buffer
, int count
)
427 spin_lock(&data
->rxlock
);
434 skb
= bt_skb_alloc(HCI_MAX_EVENT_SIZE
, GFP_ATOMIC
);
440 bt_cb(skb
)->pkt_type
= HCI_EVENT_PKT
;
441 bt_cb(skb
)->expect
= HCI_EVENT_HDR_SIZE
;
444 len
= min_t(uint
, bt_cb(skb
)->expect
, count
);
445 memcpy(skb_put(skb
, len
), buffer
, len
);
449 bt_cb(skb
)->expect
-= len
;
451 if (skb
->len
== HCI_EVENT_HDR_SIZE
) {
452 /* Complete event header */
453 bt_cb(skb
)->expect
= hci_event_hdr(skb
)->plen
;
455 if (skb_tailroom(skb
) < bt_cb(skb
)->expect
) {
464 if (bt_cb(skb
)->expect
== 0) {
466 data
->recv_event(data
->hdev
, skb
);
472 spin_unlock(&data
->rxlock
);
477 static int btusb_recv_bulk(struct btusb_data
*data
, void *buffer
, int count
)
482 spin_lock(&data
->rxlock
);
489 skb
= bt_skb_alloc(HCI_MAX_FRAME_SIZE
, GFP_ATOMIC
);
495 bt_cb(skb
)->pkt_type
= HCI_ACLDATA_PKT
;
496 bt_cb(skb
)->expect
= HCI_ACL_HDR_SIZE
;
499 len
= min_t(uint
, bt_cb(skb
)->expect
, count
);
500 memcpy(skb_put(skb
, len
), buffer
, len
);
504 bt_cb(skb
)->expect
-= len
;
506 if (skb
->len
== HCI_ACL_HDR_SIZE
) {
507 __le16 dlen
= hci_acl_hdr(skb
)->dlen
;
509 /* Complete ACL header */
510 bt_cb(skb
)->expect
= __le16_to_cpu(dlen
);
512 if (skb_tailroom(skb
) < bt_cb(skb
)->expect
) {
521 if (bt_cb(skb
)->expect
== 0) {
523 hci_recv_frame(data
->hdev
, skb
);
529 spin_unlock(&data
->rxlock
);
534 static int btusb_recv_isoc(struct btusb_data
*data
, void *buffer
, int count
)
539 spin_lock(&data
->rxlock
);
546 skb
= bt_skb_alloc(HCI_MAX_SCO_SIZE
, GFP_ATOMIC
);
552 bt_cb(skb
)->pkt_type
= HCI_SCODATA_PKT
;
553 bt_cb(skb
)->expect
= HCI_SCO_HDR_SIZE
;
556 len
= min_t(uint
, bt_cb(skb
)->expect
, count
);
557 memcpy(skb_put(skb
, len
), buffer
, len
);
561 bt_cb(skb
)->expect
-= len
;
563 if (skb
->len
== HCI_SCO_HDR_SIZE
) {
564 /* Complete SCO header */
565 bt_cb(skb
)->expect
= hci_sco_hdr(skb
)->dlen
;
567 if (skb_tailroom(skb
) < bt_cb(skb
)->expect
) {
576 if (bt_cb(skb
)->expect
== 0) {
578 hci_recv_frame(data
->hdev
, skb
);
584 spin_unlock(&data
->rxlock
);
589 static void btusb_intr_complete(struct urb
*urb
)
591 struct hci_dev
*hdev
= urb
->context
;
592 struct btusb_data
*data
= hci_get_drvdata(hdev
);
595 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
598 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
601 if (urb
->status
== 0) {
602 hdev
->stat
.byte_rx
+= urb
->actual_length
;
604 if (btusb_recv_intr(data
, urb
->transfer_buffer
,
605 urb
->actual_length
) < 0) {
606 BT_ERR("%s corrupted event packet", hdev
->name
);
609 } else if (urb
->status
== -ENOENT
) {
610 /* Avoid suspend failed when usb_kill_urb */
614 if (!test_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
617 usb_mark_last_busy(data
->udev
);
618 usb_anchor_urb(urb
, &data
->intr_anchor
);
620 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
622 /* -EPERM: urb is being killed;
623 * -ENODEV: device got disconnected */
624 if (err
!= -EPERM
&& err
!= -ENODEV
)
625 BT_ERR("%s urb %p failed to resubmit (%d)",
626 hdev
->name
, urb
, -err
);
627 usb_unanchor_urb(urb
);
631 static int btusb_submit_intr_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
633 struct btusb_data
*data
= hci_get_drvdata(hdev
);
639 BT_DBG("%s", hdev
->name
);
644 urb
= usb_alloc_urb(0, mem_flags
);
648 size
= le16_to_cpu(data
->intr_ep
->wMaxPacketSize
);
650 buf
= kmalloc(size
, mem_flags
);
656 pipe
= usb_rcvintpipe(data
->udev
, data
->intr_ep
->bEndpointAddress
);
658 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
,
659 btusb_intr_complete
, hdev
, data
->intr_ep
->bInterval
);
661 urb
->transfer_flags
|= URB_FREE_BUFFER
;
663 usb_anchor_urb(urb
, &data
->intr_anchor
);
665 err
= usb_submit_urb(urb
, mem_flags
);
667 if (err
!= -EPERM
&& err
!= -ENODEV
)
668 BT_ERR("%s urb %p submission failed (%d)",
669 hdev
->name
, urb
, -err
);
670 usb_unanchor_urb(urb
);
678 static void btusb_bulk_complete(struct urb
*urb
)
680 struct hci_dev
*hdev
= urb
->context
;
681 struct btusb_data
*data
= hci_get_drvdata(hdev
);
684 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
687 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
690 if (urb
->status
== 0) {
691 hdev
->stat
.byte_rx
+= urb
->actual_length
;
693 if (data
->recv_bulk(data
, urb
->transfer_buffer
,
694 urb
->actual_length
) < 0) {
695 BT_ERR("%s corrupted ACL packet", hdev
->name
);
698 } else if (urb
->status
== -ENOENT
) {
699 /* Avoid suspend failed when usb_kill_urb */
703 if (!test_bit(BTUSB_BULK_RUNNING
, &data
->flags
))
706 usb_anchor_urb(urb
, &data
->bulk_anchor
);
707 usb_mark_last_busy(data
->udev
);
709 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
711 /* -EPERM: urb is being killed;
712 * -ENODEV: device got disconnected */
713 if (err
!= -EPERM
&& err
!= -ENODEV
)
714 BT_ERR("%s urb %p failed to resubmit (%d)",
715 hdev
->name
, urb
, -err
);
716 usb_unanchor_urb(urb
);
720 static int btusb_submit_bulk_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
722 struct btusb_data
*data
= hci_get_drvdata(hdev
);
726 int err
, size
= HCI_MAX_FRAME_SIZE
;
728 BT_DBG("%s", hdev
->name
);
730 if (!data
->bulk_rx_ep
)
733 urb
= usb_alloc_urb(0, mem_flags
);
737 buf
= kmalloc(size
, mem_flags
);
743 pipe
= usb_rcvbulkpipe(data
->udev
, data
->bulk_rx_ep
->bEndpointAddress
);
745 usb_fill_bulk_urb(urb
, data
->udev
, pipe
, buf
, size
,
746 btusb_bulk_complete
, hdev
);
748 urb
->transfer_flags
|= URB_FREE_BUFFER
;
750 usb_mark_last_busy(data
->udev
);
751 usb_anchor_urb(urb
, &data
->bulk_anchor
);
753 err
= usb_submit_urb(urb
, mem_flags
);
755 if (err
!= -EPERM
&& err
!= -ENODEV
)
756 BT_ERR("%s urb %p submission failed (%d)",
757 hdev
->name
, urb
, -err
);
758 usb_unanchor_urb(urb
);
766 static void btusb_isoc_complete(struct urb
*urb
)
768 struct hci_dev
*hdev
= urb
->context
;
769 struct btusb_data
*data
= hci_get_drvdata(hdev
);
772 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
775 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
778 if (urb
->status
== 0) {
779 for (i
= 0; i
< urb
->number_of_packets
; i
++) {
780 unsigned int offset
= urb
->iso_frame_desc
[i
].offset
;
781 unsigned int length
= urb
->iso_frame_desc
[i
].actual_length
;
783 if (urb
->iso_frame_desc
[i
].status
)
786 hdev
->stat
.byte_rx
+= length
;
788 if (btusb_recv_isoc(data
, urb
->transfer_buffer
+ offset
,
790 BT_ERR("%s corrupted SCO packet", hdev
->name
);
794 } else if (urb
->status
== -ENOENT
) {
795 /* Avoid suspend failed when usb_kill_urb */
799 if (!test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
))
802 usb_anchor_urb(urb
, &data
->isoc_anchor
);
804 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
806 /* -EPERM: urb is being killed;
807 * -ENODEV: device got disconnected */
808 if (err
!= -EPERM
&& err
!= -ENODEV
)
809 BT_ERR("%s urb %p failed to resubmit (%d)",
810 hdev
->name
, urb
, -err
);
811 usb_unanchor_urb(urb
);
815 static inline void __fill_isoc_descriptor(struct urb
*urb
, int len
, int mtu
)
819 BT_DBG("len %d mtu %d", len
, mtu
);
821 for (i
= 0; i
< BTUSB_MAX_ISOC_FRAMES
&& len
>= mtu
;
822 i
++, offset
+= mtu
, len
-= mtu
) {
823 urb
->iso_frame_desc
[i
].offset
= offset
;
824 urb
->iso_frame_desc
[i
].length
= mtu
;
827 if (len
&& i
< BTUSB_MAX_ISOC_FRAMES
) {
828 urb
->iso_frame_desc
[i
].offset
= offset
;
829 urb
->iso_frame_desc
[i
].length
= len
;
833 urb
->number_of_packets
= i
;
836 static int btusb_submit_isoc_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
838 struct btusb_data
*data
= hci_get_drvdata(hdev
);
844 BT_DBG("%s", hdev
->name
);
846 if (!data
->isoc_rx_ep
)
849 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, mem_flags
);
853 size
= le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
) *
854 BTUSB_MAX_ISOC_FRAMES
;
856 buf
= kmalloc(size
, mem_flags
);
862 pipe
= usb_rcvisocpipe(data
->udev
, data
->isoc_rx_ep
->bEndpointAddress
);
864 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
, btusb_isoc_complete
,
865 hdev
, data
->isoc_rx_ep
->bInterval
);
867 urb
->transfer_flags
= URB_FREE_BUFFER
| URB_ISO_ASAP
;
869 __fill_isoc_descriptor(urb
, size
,
870 le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
));
872 usb_anchor_urb(urb
, &data
->isoc_anchor
);
874 err
= usb_submit_urb(urb
, mem_flags
);
876 if (err
!= -EPERM
&& err
!= -ENODEV
)
877 BT_ERR("%s urb %p submission failed (%d)",
878 hdev
->name
, urb
, -err
);
879 usb_unanchor_urb(urb
);
887 static void btusb_diag_complete(struct urb
*urb
)
889 struct hci_dev
*hdev
= urb
->context
;
890 struct btusb_data
*data
= hci_get_drvdata(hdev
);
893 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
896 if (urb
->status
== 0) {
899 skb
= bt_skb_alloc(urb
->actual_length
, GFP_ATOMIC
);
901 memcpy(skb_put(skb
, urb
->actual_length
),
902 urb
->transfer_buffer
, urb
->actual_length
);
903 hci_recv_diag(hdev
, skb
);
905 } else if (urb
->status
== -ENOENT
) {
906 /* Avoid suspend failed when usb_kill_urb */
910 if (!test_bit(BTUSB_DIAG_RUNNING
, &data
->flags
))
913 usb_anchor_urb(urb
, &data
->diag_anchor
);
914 usb_mark_last_busy(data
->udev
);
916 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
918 /* -EPERM: urb is being killed;
919 * -ENODEV: device got disconnected */
920 if (err
!= -EPERM
&& err
!= -ENODEV
)
921 BT_ERR("%s urb %p failed to resubmit (%d)",
922 hdev
->name
, urb
, -err
);
923 usb_unanchor_urb(urb
);
927 static int btusb_submit_diag_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
929 struct btusb_data
*data
= hci_get_drvdata(hdev
);
933 int err
, size
= HCI_MAX_FRAME_SIZE
;
935 BT_DBG("%s", hdev
->name
);
937 if (!data
->diag_rx_ep
)
940 urb
= usb_alloc_urb(0, mem_flags
);
944 buf
= kmalloc(size
, mem_flags
);
950 pipe
= usb_rcvbulkpipe(data
->udev
, data
->diag_rx_ep
->bEndpointAddress
);
952 usb_fill_bulk_urb(urb
, data
->udev
, pipe
, buf
, size
,
953 btusb_diag_complete
, hdev
);
955 urb
->transfer_flags
|= URB_FREE_BUFFER
;
957 usb_mark_last_busy(data
->udev
);
958 usb_anchor_urb(urb
, &data
->diag_anchor
);
960 err
= usb_submit_urb(urb
, mem_flags
);
962 if (err
!= -EPERM
&& err
!= -ENODEV
)
963 BT_ERR("%s urb %p submission failed (%d)",
964 hdev
->name
, urb
, -err
);
965 usb_unanchor_urb(urb
);
973 static void btusb_tx_complete(struct urb
*urb
)
975 struct sk_buff
*skb
= urb
->context
;
976 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
977 struct btusb_data
*data
= hci_get_drvdata(hdev
);
979 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
982 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
986 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
991 spin_lock(&data
->txlock
);
992 data
->tx_in_flight
--;
993 spin_unlock(&data
->txlock
);
995 kfree(urb
->setup_packet
);
1000 static void btusb_isoc_tx_complete(struct urb
*urb
)
1002 struct sk_buff
*skb
= urb
->context
;
1003 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
1005 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
1006 urb
->actual_length
);
1008 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
1012 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
1014 hdev
->stat
.err_tx
++;
1017 kfree(urb
->setup_packet
);
1022 static int btusb_open(struct hci_dev
*hdev
)
1024 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1027 BT_DBG("%s", hdev
->name
);
1029 /* Patching USB firmware files prior to starting any URBs of HCI path
1030 * It is more safe to use USB bulk channel for downloading USB patch
1032 if (data
->setup_on_usb
) {
1033 err
= data
->setup_on_usb(hdev
);
1038 err
= usb_autopm_get_interface(data
->intf
);
1042 data
->intf
->needs_remote_wakeup
= 1;
1044 if (test_and_set_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
1047 err
= btusb_submit_intr_urb(hdev
, GFP_KERNEL
);
1051 err
= btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
1053 usb_kill_anchored_urbs(&data
->intr_anchor
);
1057 set_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
1058 btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
1061 if (!btusb_submit_diag_urb(hdev
, GFP_KERNEL
))
1062 set_bit(BTUSB_DIAG_RUNNING
, &data
->flags
);
1066 usb_autopm_put_interface(data
->intf
);
1070 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
1071 usb_autopm_put_interface(data
->intf
);
1075 static void btusb_stop_traffic(struct btusb_data
*data
)
1077 usb_kill_anchored_urbs(&data
->intr_anchor
);
1078 usb_kill_anchored_urbs(&data
->bulk_anchor
);
1079 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1080 usb_kill_anchored_urbs(&data
->diag_anchor
);
1083 static int btusb_close(struct hci_dev
*hdev
)
1085 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1088 BT_DBG("%s", hdev
->name
);
1090 cancel_work_sync(&data
->work
);
1091 cancel_work_sync(&data
->waker
);
1093 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1094 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
1095 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
1096 clear_bit(BTUSB_DIAG_RUNNING
, &data
->flags
);
1098 btusb_stop_traffic(data
);
1099 btusb_free_frags(data
);
1101 err
= usb_autopm_get_interface(data
->intf
);
1105 data
->intf
->needs_remote_wakeup
= 0;
1106 usb_autopm_put_interface(data
->intf
);
1109 usb_scuttle_anchored_urbs(&data
->deferred
);
1113 static int btusb_flush(struct hci_dev
*hdev
)
1115 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1117 BT_DBG("%s", hdev
->name
);
1119 usb_kill_anchored_urbs(&data
->tx_anchor
);
1120 btusb_free_frags(data
);
1125 static struct urb
*alloc_ctrl_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1127 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1128 struct usb_ctrlrequest
*dr
;
1132 urb
= usb_alloc_urb(0, GFP_KERNEL
);
1134 return ERR_PTR(-ENOMEM
);
1136 dr
= kmalloc(sizeof(*dr
), GFP_KERNEL
);
1139 return ERR_PTR(-ENOMEM
);
1142 dr
->bRequestType
= data
->cmdreq_type
;
1143 dr
->bRequest
= data
->cmdreq
;
1146 dr
->wLength
= __cpu_to_le16(skb
->len
);
1148 pipe
= usb_sndctrlpipe(data
->udev
, 0x00);
1150 usb_fill_control_urb(urb
, data
->udev
, pipe
, (void *)dr
,
1151 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1153 skb
->dev
= (void *)hdev
;
1158 static struct urb
*alloc_bulk_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1160 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1164 if (!data
->bulk_tx_ep
)
1165 return ERR_PTR(-ENODEV
);
1167 urb
= usb_alloc_urb(0, GFP_KERNEL
);
1169 return ERR_PTR(-ENOMEM
);
1171 pipe
= usb_sndbulkpipe(data
->udev
, data
->bulk_tx_ep
->bEndpointAddress
);
1173 usb_fill_bulk_urb(urb
, data
->udev
, pipe
,
1174 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1176 skb
->dev
= (void *)hdev
;
1181 static struct urb
*alloc_isoc_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1183 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1187 if (!data
->isoc_tx_ep
)
1188 return ERR_PTR(-ENODEV
);
1190 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, GFP_KERNEL
);
1192 return ERR_PTR(-ENOMEM
);
1194 pipe
= usb_sndisocpipe(data
->udev
, data
->isoc_tx_ep
->bEndpointAddress
);
1196 usb_fill_int_urb(urb
, data
->udev
, pipe
,
1197 skb
->data
, skb
->len
, btusb_isoc_tx_complete
,
1198 skb
, data
->isoc_tx_ep
->bInterval
);
1200 urb
->transfer_flags
= URB_ISO_ASAP
;
1202 __fill_isoc_descriptor(urb
, skb
->len
,
1203 le16_to_cpu(data
->isoc_tx_ep
->wMaxPacketSize
));
1205 skb
->dev
= (void *)hdev
;
1210 static int submit_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1212 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1215 usb_anchor_urb(urb
, &data
->tx_anchor
);
1217 err
= usb_submit_urb(urb
, GFP_KERNEL
);
1219 if (err
!= -EPERM
&& err
!= -ENODEV
)
1220 BT_ERR("%s urb %p submission failed (%d)",
1221 hdev
->name
, urb
, -err
);
1222 kfree(urb
->setup_packet
);
1223 usb_unanchor_urb(urb
);
1225 usb_mark_last_busy(data
->udev
);
1232 static int submit_or_queue_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1234 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1235 unsigned long flags
;
1238 spin_lock_irqsave(&data
->txlock
, flags
);
1239 suspending
= test_bit(BTUSB_SUSPENDING
, &data
->flags
);
1241 data
->tx_in_flight
++;
1242 spin_unlock_irqrestore(&data
->txlock
, flags
);
1245 return submit_tx_urb(hdev
, urb
);
1247 usb_anchor_urb(urb
, &data
->deferred
);
1248 schedule_work(&data
->waker
);
1254 static int btusb_send_frame(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1258 BT_DBG("%s", hdev
->name
);
1260 switch (bt_cb(skb
)->pkt_type
) {
1261 case HCI_COMMAND_PKT
:
1262 urb
= alloc_ctrl_urb(hdev
, skb
);
1264 return PTR_ERR(urb
);
1266 hdev
->stat
.cmd_tx
++;
1267 return submit_or_queue_tx_urb(hdev
, urb
);
1269 case HCI_ACLDATA_PKT
:
1270 urb
= alloc_bulk_urb(hdev
, skb
);
1272 return PTR_ERR(urb
);
1274 hdev
->stat
.acl_tx
++;
1275 return submit_or_queue_tx_urb(hdev
, urb
);
1277 case HCI_SCODATA_PKT
:
1278 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
1281 urb
= alloc_isoc_urb(hdev
, skb
);
1283 return PTR_ERR(urb
);
1285 hdev
->stat
.sco_tx
++;
1286 return submit_tx_urb(hdev
, urb
);
1292 static void btusb_notify(struct hci_dev
*hdev
, unsigned int evt
)
1294 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1296 BT_DBG("%s evt %d", hdev
->name
, evt
);
1298 if (hci_conn_num(hdev
, SCO_LINK
) != data
->sco_num
) {
1299 data
->sco_num
= hci_conn_num(hdev
, SCO_LINK
);
1300 schedule_work(&data
->work
);
1304 static inline int __set_isoc_interface(struct hci_dev
*hdev
, int altsetting
)
1306 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1307 struct usb_interface
*intf
= data
->isoc
;
1308 struct usb_endpoint_descriptor
*ep_desc
;
1314 err
= usb_set_interface(data
->udev
, 1, altsetting
);
1316 BT_ERR("%s setting interface failed (%d)", hdev
->name
, -err
);
1320 data
->isoc_altsetting
= altsetting
;
1322 data
->isoc_tx_ep
= NULL
;
1323 data
->isoc_rx_ep
= NULL
;
1325 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
1326 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
1328 if (!data
->isoc_tx_ep
&& usb_endpoint_is_isoc_out(ep_desc
)) {
1329 data
->isoc_tx_ep
= ep_desc
;
1333 if (!data
->isoc_rx_ep
&& usb_endpoint_is_isoc_in(ep_desc
)) {
1334 data
->isoc_rx_ep
= ep_desc
;
1339 if (!data
->isoc_tx_ep
|| !data
->isoc_rx_ep
) {
1340 BT_ERR("%s invalid SCO descriptors", hdev
->name
);
1347 static void btusb_work(struct work_struct
*work
)
1349 struct btusb_data
*data
= container_of(work
, struct btusb_data
, work
);
1350 struct hci_dev
*hdev
= data
->hdev
;
1354 if (data
->sco_num
> 0) {
1355 if (!test_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
)) {
1356 err
= usb_autopm_get_interface(data
->isoc
? data
->isoc
: data
->intf
);
1358 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1359 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1363 set_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
);
1366 if (hdev
->voice_setting
& 0x0020) {
1367 static const int alts
[3] = { 2, 4, 5 };
1369 new_alts
= alts
[data
->sco_num
- 1];
1371 new_alts
= data
->sco_num
;
1374 if (data
->isoc_altsetting
!= new_alts
) {
1375 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1376 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1378 /* When isochronous alternate setting needs to be
1379 * changed, because SCO connection has been added
1380 * or removed, a packet fragment may be left in the
1381 * reassembling state. This could lead to wrongly
1382 * assembled fragments.
1384 * Clear outstanding fragment when selecting a new
1385 * alternate setting.
1387 spin_lock(&data
->rxlock
);
1388 kfree_skb(data
->sco_skb
);
1389 data
->sco_skb
= NULL
;
1390 spin_unlock(&data
->rxlock
);
1392 if (__set_isoc_interface(hdev
, new_alts
) < 0)
1396 if (!test_and_set_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
1397 if (btusb_submit_isoc_urb(hdev
, GFP_KERNEL
) < 0)
1398 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1400 btusb_submit_isoc_urb(hdev
, GFP_KERNEL
);
1403 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1404 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1406 __set_isoc_interface(hdev
, 0);
1407 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
))
1408 usb_autopm_put_interface(data
->isoc
? data
->isoc
: data
->intf
);
1412 static void btusb_waker(struct work_struct
*work
)
1414 struct btusb_data
*data
= container_of(work
, struct btusb_data
, waker
);
1417 err
= usb_autopm_get_interface(data
->intf
);
1421 usb_autopm_put_interface(data
->intf
);
1424 static int btusb_setup_bcm92035(struct hci_dev
*hdev
)
1426 struct sk_buff
*skb
;
1429 BT_DBG("%s", hdev
->name
);
1431 skb
= __hci_cmd_sync(hdev
, 0xfc3b, 1, &val
, HCI_INIT_TIMEOUT
);
1433 BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb
));
1440 static int btusb_setup_csr(struct hci_dev
*hdev
)
1442 struct hci_rp_read_local_version
*rp
;
1443 struct sk_buff
*skb
;
1445 BT_DBG("%s", hdev
->name
);
1447 skb
= __hci_cmd_sync(hdev
, HCI_OP_READ_LOCAL_VERSION
, 0, NULL
,
1450 int err
= PTR_ERR(skb
);
1451 BT_ERR("%s: CSR: Local version failed (%d)", hdev
->name
, err
);
1455 if (skb
->len
!= sizeof(struct hci_rp_read_local_version
)) {
1456 BT_ERR("%s: CSR: Local version length mismatch", hdev
->name
);
1461 rp
= (struct hci_rp_read_local_version
*)skb
->data
;
1463 /* Detect controllers which aren't real CSR ones. */
1464 if (le16_to_cpu(rp
->manufacturer
) != 10 ||
1465 le16_to_cpu(rp
->lmp_subver
) == 0x0c5c) {
1466 /* Clear the reset quirk since this is not an actual
1467 * early Bluetooth 1.1 device from CSR.
1469 clear_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
1471 /* These fake CSR controllers have all a broken
1472 * stored link key handling and so just disable it.
1474 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
, &hdev
->quirks
);
1482 static const struct firmware
*btusb_setup_intel_get_fw(struct hci_dev
*hdev
,
1483 struct intel_version
*ver
)
1485 const struct firmware
*fw
;
1489 snprintf(fwname
, sizeof(fwname
),
1490 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1491 ver
->hw_platform
, ver
->hw_variant
, ver
->hw_revision
,
1492 ver
->fw_variant
, ver
->fw_revision
, ver
->fw_build_num
,
1493 ver
->fw_build_ww
, ver
->fw_build_yy
);
1495 ret
= request_firmware(&fw
, fwname
, &hdev
->dev
);
1497 if (ret
== -EINVAL
) {
1498 BT_ERR("%s Intel firmware file request failed (%d)",
1503 BT_ERR("%s failed to open Intel firmware file: %s(%d)",
1504 hdev
->name
, fwname
, ret
);
1506 /* If the correct firmware patch file is not found, use the
1507 * default firmware patch file instead
1509 snprintf(fwname
, sizeof(fwname
), "intel/ibt-hw-%x.%x.bseq",
1510 ver
->hw_platform
, ver
->hw_variant
);
1511 if (request_firmware(&fw
, fwname
, &hdev
->dev
) < 0) {
1512 BT_ERR("%s failed to open default Intel fw file: %s",
1513 hdev
->name
, fwname
);
1518 BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev
->name
, fwname
);
1523 static int btusb_setup_intel_patching(struct hci_dev
*hdev
,
1524 const struct firmware
*fw
,
1525 const u8
**fw_ptr
, int *disable_patch
)
1527 struct sk_buff
*skb
;
1528 struct hci_command_hdr
*cmd
;
1529 const u8
*cmd_param
;
1530 struct hci_event_hdr
*evt
= NULL
;
1531 const u8
*evt_param
= NULL
;
1532 int remain
= fw
->size
- (*fw_ptr
- fw
->data
);
1534 /* The first byte indicates the types of the patch command or event.
1535 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1536 * in the current firmware buffer doesn't start with 0x01 or
1537 * the size of remain buffer is smaller than HCI command header,
1538 * the firmware file is corrupted and it should stop the patching
1541 if (remain
> HCI_COMMAND_HDR_SIZE
&& *fw_ptr
[0] != 0x01) {
1542 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev
->name
);
1548 cmd
= (struct hci_command_hdr
*)(*fw_ptr
);
1549 *fw_ptr
+= sizeof(*cmd
);
1550 remain
-= sizeof(*cmd
);
1552 /* Ensure that the remain firmware data is long enough than the length
1553 * of command parameter. If not, the firmware file is corrupted.
1555 if (remain
< cmd
->plen
) {
1556 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev
->name
);
1560 /* If there is a command that loads a patch in the firmware
1561 * file, then enable the patch upon success, otherwise just
1562 * disable the manufacturer mode, for example patch activation
1563 * is not required when the default firmware patch file is used
1564 * because there are no patch data to load.
1566 if (*disable_patch
&& le16_to_cpu(cmd
->opcode
) == 0xfc8e)
1569 cmd_param
= *fw_ptr
;
1570 *fw_ptr
+= cmd
->plen
;
1571 remain
-= cmd
->plen
;
1573 /* This reads the expected events when the above command is sent to the
1574 * device. Some vendor commands expects more than one events, for
1575 * example command status event followed by vendor specific event.
1576 * For this case, it only keeps the last expected event. so the command
1577 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1578 * last expected event.
1580 while (remain
> HCI_EVENT_HDR_SIZE
&& *fw_ptr
[0] == 0x02) {
1584 evt
= (struct hci_event_hdr
*)(*fw_ptr
);
1585 *fw_ptr
+= sizeof(*evt
);
1586 remain
-= sizeof(*evt
);
1588 if (remain
< evt
->plen
) {
1589 BT_ERR("%s Intel fw corrupted: invalid evt len",
1594 evt_param
= *fw_ptr
;
1595 *fw_ptr
+= evt
->plen
;
1596 remain
-= evt
->plen
;
1599 /* Every HCI commands in the firmware file has its correspond event.
1600 * If event is not found or remain is smaller than zero, the firmware
1601 * file is corrupted.
1603 if (!evt
|| !evt_param
|| remain
< 0) {
1604 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev
->name
);
1608 skb
= __hci_cmd_sync_ev(hdev
, le16_to_cpu(cmd
->opcode
), cmd
->plen
,
1609 cmd_param
, evt
->evt
, HCI_INIT_TIMEOUT
);
1611 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
1612 hdev
->name
, cmd
->opcode
, PTR_ERR(skb
));
1613 return PTR_ERR(skb
);
1616 /* It ensures that the returned event matches the event data read from
1617 * the firmware file. At fist, it checks the length and then
1618 * the contents of the event.
1620 if (skb
->len
!= evt
->plen
) {
1621 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev
->name
,
1622 le16_to_cpu(cmd
->opcode
));
1627 if (memcmp(skb
->data
, evt_param
, evt
->plen
)) {
1628 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
1629 hdev
->name
, le16_to_cpu(cmd
->opcode
));
1638 static int btusb_setup_intel(struct hci_dev
*hdev
)
1640 struct sk_buff
*skb
;
1641 const struct firmware
*fw
;
1644 struct intel_version
*ver
;
1646 const u8 mfg_enable
[] = { 0x01, 0x00 };
1647 const u8 mfg_disable
[] = { 0x00, 0x00 };
1648 const u8 mfg_reset_deactivate
[] = { 0x00, 0x01 };
1649 const u8 mfg_reset_activate
[] = { 0x00, 0x02 };
1651 BT_DBG("%s", hdev
->name
);
1653 /* The controller has a bug with the first HCI command sent to it
1654 * returning number of completed commands as zero. This would stall the
1655 * command processing in the Bluetooth core.
1657 * As a workaround, send HCI Reset command first which will reset the
1658 * number of completed commands and allow normal command processing
1661 skb
= __hci_cmd_sync(hdev
, HCI_OP_RESET
, 0, NULL
, HCI_INIT_TIMEOUT
);
1663 BT_ERR("%s sending initial HCI reset command failed (%ld)",
1664 hdev
->name
, PTR_ERR(skb
));
1665 return PTR_ERR(skb
);
1669 /* Read Intel specific controller version first to allow selection of
1670 * which firmware file to load.
1672 * The returned information are hardware variant and revision plus
1673 * firmware variant, revision and build number.
1675 skb
= __hci_cmd_sync(hdev
, 0xfc05, 0, NULL
, HCI_INIT_TIMEOUT
);
1677 BT_ERR("%s reading Intel fw version command failed (%ld)",
1678 hdev
->name
, PTR_ERR(skb
));
1679 return PTR_ERR(skb
);
1682 if (skb
->len
!= sizeof(*ver
)) {
1683 BT_ERR("%s Intel version event length mismatch", hdev
->name
);
1688 ver
= (struct intel_version
*)skb
->data
;
1690 BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
1691 hdev
->name
, ver
->hw_platform
, ver
->hw_variant
,
1692 ver
->hw_revision
, ver
->fw_variant
, ver
->fw_revision
,
1693 ver
->fw_build_num
, ver
->fw_build_ww
, ver
->fw_build_yy
,
1696 /* fw_patch_num indicates the version of patch the device currently
1697 * have. If there is no patch data in the device, it is always 0x00.
1698 * So, if it is other than 0x00, no need to patch the device again.
1700 if (ver
->fw_patch_num
) {
1701 BT_INFO("%s: Intel device is already patched. patch num: %02x",
1702 hdev
->name
, ver
->fw_patch_num
);
1704 btintel_check_bdaddr(hdev
);
1708 /* Opens the firmware patch file based on the firmware version read
1709 * from the controller. If it fails to open the matching firmware
1710 * patch file, it tries to open the default firmware patch file.
1711 * If no patch file is found, allow the device to operate without
1714 fw
= btusb_setup_intel_get_fw(hdev
, ver
);
1717 btintel_check_bdaddr(hdev
);
1724 /* This Intel specific command enables the manufacturer mode of the
1727 * Only while this mode is enabled, the driver can download the
1728 * firmware patch data and configuration parameters.
1730 skb
= __hci_cmd_sync(hdev
, 0xfc11, 2, mfg_enable
, HCI_INIT_TIMEOUT
);
1732 BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
1733 hdev
->name
, PTR_ERR(skb
));
1734 release_firmware(fw
);
1735 return PTR_ERR(skb
);
1742 /* The firmware data file consists of list of Intel specific HCI
1743 * commands and its expected events. The first byte indicates the
1744 * type of the message, either HCI command or HCI event.
1746 * It reads the command and its expected event from the firmware file,
1747 * and send to the controller. Once __hci_cmd_sync_ev() returns,
1748 * the returned event is compared with the event read from the firmware
1749 * file and it will continue until all the messages are downloaded to
1752 * Once the firmware patching is completed successfully,
1753 * the manufacturer mode is disabled with reset and activating the
1756 * If the firmware patching fails, the manufacturer mode is
1757 * disabled with reset and deactivating the patch.
1759 * If the default patch file is used, no reset is done when disabling
1762 while (fw
->size
> fw_ptr
- fw
->data
) {
1765 ret
= btusb_setup_intel_patching(hdev
, fw
, &fw_ptr
,
1768 goto exit_mfg_deactivate
;
1771 release_firmware(fw
);
1774 goto exit_mfg_disable
;
1776 /* Patching completed successfully and disable the manufacturer mode
1777 * with reset and activate the downloaded firmware patches.
1779 skb
= __hci_cmd_sync(hdev
, 0xfc11, sizeof(mfg_reset_activate
),
1780 mfg_reset_activate
, HCI_INIT_TIMEOUT
);
1782 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1783 hdev
->name
, PTR_ERR(skb
));
1784 return PTR_ERR(skb
);
1788 BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
1791 btintel_check_bdaddr(hdev
);
1795 /* Disable the manufacturer mode without reset */
1796 skb
= __hci_cmd_sync(hdev
, 0xfc11, sizeof(mfg_disable
), mfg_disable
,
1799 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1800 hdev
->name
, PTR_ERR(skb
));
1801 return PTR_ERR(skb
);
1805 BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev
->name
);
1807 btintel_check_bdaddr(hdev
);
1810 exit_mfg_deactivate
:
1811 release_firmware(fw
);
1813 /* Patching failed. Disable the manufacturer mode with reset and
1814 * deactivate the downloaded firmware patches.
1816 skb
= __hci_cmd_sync(hdev
, 0xfc11, sizeof(mfg_reset_deactivate
),
1817 mfg_reset_deactivate
, HCI_INIT_TIMEOUT
);
1819 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1820 hdev
->name
, PTR_ERR(skb
));
1821 return PTR_ERR(skb
);
1825 BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
1828 btintel_check_bdaddr(hdev
);
1832 static int inject_cmd_complete(struct hci_dev
*hdev
, __u16 opcode
)
1834 struct sk_buff
*skb
;
1835 struct hci_event_hdr
*hdr
;
1836 struct hci_ev_cmd_complete
*evt
;
1838 skb
= bt_skb_alloc(sizeof(*hdr
) + sizeof(*evt
) + 1, GFP_ATOMIC
);
1842 hdr
= (struct hci_event_hdr
*)skb_put(skb
, sizeof(*hdr
));
1843 hdr
->evt
= HCI_EV_CMD_COMPLETE
;
1844 hdr
->plen
= sizeof(*evt
) + 1;
1846 evt
= (struct hci_ev_cmd_complete
*)skb_put(skb
, sizeof(*evt
));
1848 evt
->opcode
= cpu_to_le16(opcode
);
1850 *skb_put(skb
, 1) = 0x00;
1852 bt_cb(skb
)->pkt_type
= HCI_EVENT_PKT
;
1854 return hci_recv_frame(hdev
, skb
);
1857 static int btusb_recv_bulk_intel(struct btusb_data
*data
, void *buffer
,
1860 /* When the device is in bootloader mode, then it can send
1861 * events via the bulk endpoint. These events are treated the
1862 * same way as the ones received from the interrupt endpoint.
1864 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
))
1865 return btusb_recv_intr(data
, buffer
, count
);
1867 return btusb_recv_bulk(data
, buffer
, count
);
1870 static void btusb_intel_bootup(struct btusb_data
*data
, const void *ptr
,
1873 const struct intel_bootup
*evt
= ptr
;
1875 if (len
!= sizeof(*evt
))
1878 if (test_and_clear_bit(BTUSB_BOOTING
, &data
->flags
)) {
1879 smp_mb__after_atomic();
1880 wake_up_bit(&data
->flags
, BTUSB_BOOTING
);
1884 static void btusb_intel_secure_send_result(struct btusb_data
*data
,
1885 const void *ptr
, unsigned int len
)
1887 const struct intel_secure_send_result
*evt
= ptr
;
1889 if (len
!= sizeof(*evt
))
1893 set_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
);
1895 if (test_and_clear_bit(BTUSB_DOWNLOADING
, &data
->flags
) &&
1896 test_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
)) {
1897 smp_mb__after_atomic();
1898 wake_up_bit(&data
->flags
, BTUSB_DOWNLOADING
);
1902 static int btusb_recv_event_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1904 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1906 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
1907 struct hci_event_hdr
*hdr
= (void *)skb
->data
;
1909 if (skb
->len
> HCI_EVENT_HDR_SIZE
&& hdr
->evt
== 0xff &&
1911 const void *ptr
= skb
->data
+ HCI_EVENT_HDR_SIZE
+ 1;
1912 unsigned int len
= skb
->len
- HCI_EVENT_HDR_SIZE
- 1;
1914 switch (skb
->data
[2]) {
1916 /* When switching to the operational firmware
1917 * the device sends a vendor specific event
1918 * indicating that the bootup completed.
1920 btusb_intel_bootup(data
, ptr
, len
);
1923 /* When the firmware loading completes the
1924 * device sends out a vendor specific event
1925 * indicating the result of the firmware
1928 btusb_intel_secure_send_result(data
, ptr
, len
);
1934 return hci_recv_frame(hdev
, skb
);
1937 static int btusb_send_frame_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1939 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1942 BT_DBG("%s", hdev
->name
);
1944 switch (bt_cb(skb
)->pkt_type
) {
1945 case HCI_COMMAND_PKT
:
1946 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
1947 struct hci_command_hdr
*cmd
= (void *)skb
->data
;
1948 __u16 opcode
= le16_to_cpu(cmd
->opcode
);
1950 /* When in bootloader mode and the command 0xfc09
1951 * is received, it needs to be send down the
1952 * bulk endpoint. So allocate a bulk URB instead.
1954 if (opcode
== 0xfc09)
1955 urb
= alloc_bulk_urb(hdev
, skb
);
1957 urb
= alloc_ctrl_urb(hdev
, skb
);
1959 /* When the 0xfc01 command is issued to boot into
1960 * the operational firmware, it will actually not
1961 * send a command complete event. To keep the flow
1962 * control working inject that event here.
1964 if (opcode
== 0xfc01)
1965 inject_cmd_complete(hdev
, opcode
);
1967 urb
= alloc_ctrl_urb(hdev
, skb
);
1970 return PTR_ERR(urb
);
1972 hdev
->stat
.cmd_tx
++;
1973 return submit_or_queue_tx_urb(hdev
, urb
);
1975 case HCI_ACLDATA_PKT
:
1976 urb
= alloc_bulk_urb(hdev
, skb
);
1978 return PTR_ERR(urb
);
1980 hdev
->stat
.acl_tx
++;
1981 return submit_or_queue_tx_urb(hdev
, urb
);
1983 case HCI_SCODATA_PKT
:
1984 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
1987 urb
= alloc_isoc_urb(hdev
, skb
);
1989 return PTR_ERR(urb
);
1991 hdev
->stat
.sco_tx
++;
1992 return submit_tx_urb(hdev
, urb
);
1998 static int btusb_setup_intel_new(struct hci_dev
*hdev
)
2000 static const u8 reset_param
[] = { 0x00, 0x01, 0x00, 0x01,
2001 0x00, 0x08, 0x04, 0x00 };
2002 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2003 struct sk_buff
*skb
;
2004 struct intel_version
*ver
;
2005 struct intel_boot_params
*params
;
2006 const struct firmware
*fw
;
2010 ktime_t calltime
, delta
, rettime
;
2011 unsigned long long duration
;
2014 BT_DBG("%s", hdev
->name
);
2016 calltime
= ktime_get();
2018 /* Read the Intel version information to determine if the device
2019 * is in bootloader mode or if it already has operational firmware
2022 skb
= __hci_cmd_sync(hdev
, 0xfc05, 0, NULL
, HCI_INIT_TIMEOUT
);
2024 BT_ERR("%s: Reading Intel version information failed (%ld)",
2025 hdev
->name
, PTR_ERR(skb
));
2026 return PTR_ERR(skb
);
2029 if (skb
->len
!= sizeof(*ver
)) {
2030 BT_ERR("%s: Intel version event size mismatch", hdev
->name
);
2035 ver
= (struct intel_version
*)skb
->data
;
2037 /* The hardware platform number has a fixed value of 0x37 and
2038 * for now only accept this single value.
2040 if (ver
->hw_platform
!= 0x37) {
2041 BT_ERR("%s: Unsupported Intel hardware platform (%u)",
2042 hdev
->name
, ver
->hw_platform
);
2047 /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
2048 * supported by this firmware loading method. This check has been
2049 * put in place to ensure correct forward compatibility options
2050 * when newer hardware variants come along.
2052 if (ver
->hw_variant
!= 0x0b) {
2053 BT_ERR("%s: Unsupported Intel hardware variant (%u)",
2054 hdev
->name
, ver
->hw_variant
);
2059 btintel_version_info(hdev
, ver
);
2061 /* The firmware variant determines if the device is in bootloader
2062 * mode or is running operational firmware. The value 0x06 identifies
2063 * the bootloader and the value 0x23 identifies the operational
2066 * When the operational firmware is already present, then only
2067 * the check for valid Bluetooth device address is needed. This
2068 * determines if the device will be added as configured or
2069 * unconfigured controller.
2071 * It is not possible to use the Secure Boot Parameters in this
2072 * case since that command is only available in bootloader mode.
2074 if (ver
->fw_variant
== 0x23) {
2076 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2077 btintel_check_bdaddr(hdev
);
2081 /* If the device is not in bootloader mode, then the only possible
2082 * choice is to return an error and abort the device initialization.
2084 if (ver
->fw_variant
!= 0x06) {
2085 BT_ERR("%s: Unsupported Intel firmware variant (%u)",
2086 hdev
->name
, ver
->fw_variant
);
2093 /* Read the secure boot parameters to identify the operating
2094 * details of the bootloader.
2096 skb
= __hci_cmd_sync(hdev
, 0xfc0d, 0, NULL
, HCI_INIT_TIMEOUT
);
2098 BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
2099 hdev
->name
, PTR_ERR(skb
));
2100 return PTR_ERR(skb
);
2103 if (skb
->len
!= sizeof(*params
)) {
2104 BT_ERR("%s: Intel boot parameters size mismatch", hdev
->name
);
2109 params
= (struct intel_boot_params
*)skb
->data
;
2111 BT_INFO("%s: Device revision is %u", hdev
->name
,
2112 le16_to_cpu(params
->dev_revid
));
2114 BT_INFO("%s: Secure boot is %s", hdev
->name
,
2115 params
->secure_boot
? "enabled" : "disabled");
2117 BT_INFO("%s: OTP lock is %s", hdev
->name
,
2118 params
->otp_lock
? "enabled" : "disabled");
2120 BT_INFO("%s: API lock is %s", hdev
->name
,
2121 params
->api_lock
? "enabled" : "disabled");
2123 BT_INFO("%s: Debug lock is %s", hdev
->name
,
2124 params
->debug_lock
? "enabled" : "disabled");
2126 BT_INFO("%s: Minimum firmware build %u week %u %u", hdev
->name
,
2127 params
->min_fw_build_nn
, params
->min_fw_build_cw
,
2128 2000 + params
->min_fw_build_yy
);
2130 /* It is required that every single firmware fragment is acknowledged
2131 * with a command complete event. If the boot parameters indicate
2132 * that this bootloader does not send them, then abort the setup.
2134 if (params
->limited_cce
!= 0x00) {
2135 BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
2136 hdev
->name
, params
->limited_cce
);
2141 /* If the OTP has no valid Bluetooth device address, then there will
2142 * also be no valid address for the operational firmware.
2144 if (!bacmp(¶ms
->otp_bdaddr
, BDADDR_ANY
)) {
2145 BT_INFO("%s: No device address configured", hdev
->name
);
2146 set_bit(HCI_QUIRK_INVALID_BDADDR
, &hdev
->quirks
);
2149 /* With this Intel bootloader only the hardware variant and device
2150 * revision information are used to select the right firmware.
2152 * Currently this bootloader support is limited to hardware variant
2153 * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
2155 snprintf(fwname
, sizeof(fwname
), "intel/ibt-11-%u.sfi",
2156 le16_to_cpu(params
->dev_revid
));
2158 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2160 BT_ERR("%s: Failed to load Intel firmware file (%d)",
2166 BT_INFO("%s: Found device firmware: %s", hdev
->name
, fwname
);
2168 /* Save the DDC file name for later use to apply once the firmware
2169 * downloading is done.
2171 snprintf(fwname
, sizeof(fwname
), "intel/ibt-11-%u.ddc",
2172 le16_to_cpu(params
->dev_revid
));
2176 if (fw
->size
< 644) {
2177 BT_ERR("%s: Invalid size of firmware file (%zu)",
2178 hdev
->name
, fw
->size
);
2183 set_bit(BTUSB_DOWNLOADING
, &data
->flags
);
2185 /* Start the firmware download transaction with the Init fragment
2186 * represented by the 128 bytes of CSS header.
2188 err
= btintel_secure_send(hdev
, 0x00, 128, fw
->data
);
2190 BT_ERR("%s: Failed to send firmware header (%d)",
2195 /* Send the 256 bytes of public key information from the firmware
2196 * as the PKey fragment.
2198 err
= btintel_secure_send(hdev
, 0x03, 256, fw
->data
+ 128);
2200 BT_ERR("%s: Failed to send firmware public key (%d)",
2205 /* Send the 256 bytes of signature information from the firmware
2206 * as the Sign fragment.
2208 err
= btintel_secure_send(hdev
, 0x02, 256, fw
->data
+ 388);
2210 BT_ERR("%s: Failed to send firmware signature (%d)",
2215 fw_ptr
= fw
->data
+ 644;
2218 while (fw_ptr
- fw
->data
< fw
->size
) {
2219 struct hci_command_hdr
*cmd
= (void *)(fw_ptr
+ frag_len
);
2221 frag_len
+= sizeof(*cmd
) + cmd
->plen
;
2223 /* The parameter length of the secure send command requires
2224 * a 4 byte alignment. It happens so that the firmware file
2225 * contains proper Intel_NOP commands to align the fragments
2228 * Send set of commands with 4 byte alignment from the
2229 * firmware data buffer as a single Data fragement.
2231 if (!(frag_len
% 4)) {
2232 err
= btintel_secure_send(hdev
, 0x01, frag_len
, fw_ptr
);
2234 BT_ERR("%s: Failed to send firmware data (%d)",
2244 set_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
);
2246 BT_INFO("%s: Waiting for firmware download to complete", hdev
->name
);
2248 /* Before switching the device into operational mode and with that
2249 * booting the loaded firmware, wait for the bootloader notification
2250 * that all fragments have been successfully received.
2252 * When the event processing receives the notification, then the
2253 * BTUSB_DOWNLOADING flag will be cleared.
2255 * The firmware loading should not take longer than 5 seconds
2256 * and thus just timeout if that happens and fail the setup
2259 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_DOWNLOADING
,
2261 msecs_to_jiffies(5000));
2263 BT_ERR("%s: Firmware loading interrupted", hdev
->name
);
2269 BT_ERR("%s: Firmware loading timeout", hdev
->name
);
2274 if (test_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
)) {
2275 BT_ERR("%s: Firmware loading failed", hdev
->name
);
2280 rettime
= ktime_get();
2281 delta
= ktime_sub(rettime
, calltime
);
2282 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2284 BT_INFO("%s: Firmware loaded in %llu usecs", hdev
->name
, duration
);
2287 release_firmware(fw
);
2292 calltime
= ktime_get();
2294 set_bit(BTUSB_BOOTING
, &data
->flags
);
2296 skb
= __hci_cmd_sync(hdev
, 0xfc01, sizeof(reset_param
), reset_param
,
2299 return PTR_ERR(skb
);
2303 /* The bootloader will not indicate when the device is ready. This
2304 * is done by the operational firmware sending bootup notification.
2306 * Booting into operational firmware should not take longer than
2307 * 1 second. However if that happens, then just fail the setup
2308 * since something went wrong.
2310 BT_INFO("%s: Waiting for device to boot", hdev
->name
);
2312 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_BOOTING
,
2314 msecs_to_jiffies(1000));
2317 BT_ERR("%s: Device boot interrupted", hdev
->name
);
2322 BT_ERR("%s: Device boot timeout", hdev
->name
);
2326 rettime
= ktime_get();
2327 delta
= ktime_sub(rettime
, calltime
);
2328 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2330 BT_INFO("%s: Device booted in %llu usecs", hdev
->name
, duration
);
2332 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2334 /* Once the device is running in operational mode, it needs to apply
2335 * the device configuration (DDC) parameters.
2337 * The device can work without DDC parameters, so even if it fails
2338 * to load the file, no need to fail the setup.
2340 btintel_load_ddc_config(hdev
, fwname
);
2345 static int btusb_shutdown_intel(struct hci_dev
*hdev
)
2347 struct sk_buff
*skb
;
2350 /* Some platforms have an issue with BT LED when the interface is
2351 * down or BT radio is turned off, which takes 5 seconds to BT LED
2352 * goes off. This command turns off the BT LED immediately.
2354 skb
= __hci_cmd_sync(hdev
, 0xfc3f, 0, NULL
, HCI_INIT_TIMEOUT
);
2357 BT_ERR("%s: turning off Intel device LED failed (%ld)",
2366 static int btusb_set_bdaddr_marvell(struct hci_dev
*hdev
,
2367 const bdaddr_t
*bdaddr
)
2369 struct sk_buff
*skb
;
2374 buf
[1] = sizeof(bdaddr_t
);
2375 memcpy(buf
+ 2, bdaddr
, sizeof(bdaddr_t
));
2377 skb
= __hci_cmd_sync(hdev
, 0xfc22, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2380 BT_ERR("%s: changing Marvell device address failed (%ld)",
2389 static int btusb_set_bdaddr_ath3012(struct hci_dev
*hdev
,
2390 const bdaddr_t
*bdaddr
)
2392 struct sk_buff
*skb
;
2399 buf
[3] = sizeof(bdaddr_t
);
2400 memcpy(buf
+ 4, bdaddr
, sizeof(bdaddr_t
));
2402 skb
= __hci_cmd_sync(hdev
, 0xfc0b, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2405 BT_ERR("%s: Change address command failed (%ld)",
2414 #define QCA_DFU_PACKET_LEN 4096
2416 #define QCA_GET_TARGET_VERSION 0x09
2417 #define QCA_CHECK_STATUS 0x05
2418 #define QCA_DFU_DOWNLOAD 0x01
2420 #define QCA_SYSCFG_UPDATED 0x40
2421 #define QCA_PATCH_UPDATED 0x80
2422 #define QCA_DFU_TIMEOUT 3000
2424 struct qca_version
{
2426 __le32 patch_version
;
2432 struct qca_rampatch_version
{
2434 __le16 patch_version
;
2437 struct qca_device_info
{
2439 u8 rampatch_hdr
; /* length of header in rampatch */
2440 u8 nvm_hdr
; /* length of header in NVM */
2441 u8 ver_offset
; /* offset of version structure in rampatch */
2444 static const struct qca_device_info qca_devices_table
[] = {
2445 { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
2446 { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
2447 { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
2448 { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
2449 { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
2450 { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
2453 static int btusb_qca_send_vendor_req(struct hci_dev
*hdev
, u8 request
,
2454 void *data
, u16 size
)
2456 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2457 struct usb_device
*udev
= btdata
->udev
;
2461 buf
= kmalloc(size
, GFP_KERNEL
);
2465 /* Found some of USB hosts have IOT issues with ours so that we should
2466 * not wait until HCI layer is ready.
2468 pipe
= usb_rcvctrlpipe(udev
, 0);
2469 err
= usb_control_msg(udev
, pipe
, request
, USB_TYPE_VENDOR
| USB_DIR_IN
,
2470 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2472 BT_ERR("%s: Failed to access otp area (%d)", hdev
->name
, err
);
2476 memcpy(data
, buf
, size
);
2484 static int btusb_setup_qca_download_fw(struct hci_dev
*hdev
,
2485 const struct firmware
*firmware
,
2488 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2489 struct usb_device
*udev
= btdata
->udev
;
2490 size_t count
, size
, sent
= 0;
2494 buf
= kmalloc(QCA_DFU_PACKET_LEN
, GFP_KERNEL
);
2498 count
= firmware
->size
;
2500 size
= min_t(size_t, count
, hdr_size
);
2501 memcpy(buf
, firmware
->data
, size
);
2503 /* USB patches should go down to controller through USB path
2504 * because binary format fits to go down through USB channel.
2505 * USB control path is for patching headers and USB bulk is for
2508 pipe
= usb_sndctrlpipe(udev
, 0);
2509 err
= usb_control_msg(udev
, pipe
, QCA_DFU_DOWNLOAD
, USB_TYPE_VENDOR
,
2510 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2512 BT_ERR("%s: Failed to send headers (%d)", hdev
->name
, err
);
2520 size
= min_t(size_t, count
, QCA_DFU_PACKET_LEN
);
2522 memcpy(buf
, firmware
->data
+ sent
, size
);
2524 pipe
= usb_sndbulkpipe(udev
, 0x02);
2525 err
= usb_bulk_msg(udev
, pipe
, buf
, size
, &len
,
2528 BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
2529 hdev
->name
, sent
, firmware
->size
, err
);
2534 BT_ERR("%s: Failed to get bulk buffer", hdev
->name
);
2548 static int btusb_setup_qca_load_rampatch(struct hci_dev
*hdev
,
2549 struct qca_version
*ver
,
2550 const struct qca_device_info
*info
)
2552 struct qca_rampatch_version
*rver
;
2553 const struct firmware
*fw
;
2554 u32 ver_rom
, ver_patch
;
2555 u16 rver_rom
, rver_patch
;
2559 ver_rom
= le32_to_cpu(ver
->rom_version
);
2560 ver_patch
= le32_to_cpu(ver
->patch_version
);
2562 snprintf(fwname
, sizeof(fwname
), "qca/rampatch_usb_%08x.bin", ver_rom
);
2564 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2566 BT_ERR("%s: failed to request rampatch file: %s (%d)",
2567 hdev
->name
, fwname
, err
);
2571 BT_INFO("%s: using rampatch file: %s", hdev
->name
, fwname
);
2573 rver
= (struct qca_rampatch_version
*)(fw
->data
+ info
->ver_offset
);
2574 rver_rom
= le16_to_cpu(rver
->rom_version
);
2575 rver_patch
= le16_to_cpu(rver
->patch_version
);
2577 BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
2578 "build 0x%x", hdev
->name
, rver_rom
, rver_patch
, ver_rom
,
2581 if (rver_rom
!= ver_rom
|| rver_patch
<= ver_patch
) {
2582 BT_ERR("%s: rampatch file version did not match with firmware",
2588 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->rampatch_hdr
);
2591 release_firmware(fw
);
2596 static int btusb_setup_qca_load_nvm(struct hci_dev
*hdev
,
2597 struct qca_version
*ver
,
2598 const struct qca_device_info
*info
)
2600 const struct firmware
*fw
;
2604 snprintf(fwname
, sizeof(fwname
), "qca/nvm_usb_%08x.bin",
2605 le32_to_cpu(ver
->rom_version
));
2607 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2609 BT_ERR("%s: failed to request NVM file: %s (%d)",
2610 hdev
->name
, fwname
, err
);
2614 BT_INFO("%s: using NVM file: %s", hdev
->name
, fwname
);
2616 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->nvm_hdr
);
2618 release_firmware(fw
);
2623 static int btusb_setup_qca(struct hci_dev
*hdev
)
2625 const struct qca_device_info
*info
= NULL
;
2626 struct qca_version ver
;
2631 err
= btusb_qca_send_vendor_req(hdev
, QCA_GET_TARGET_VERSION
, &ver
,
2636 ver_rom
= le32_to_cpu(ver
.rom_version
);
2637 for (i
= 0; i
< ARRAY_SIZE(qca_devices_table
); i
++) {
2638 if (ver_rom
== qca_devices_table
[i
].rom_version
)
2639 info
= &qca_devices_table
[i
];
2642 BT_ERR("%s: don't support firmware rome 0x%x", hdev
->name
,
2647 err
= btusb_qca_send_vendor_req(hdev
, QCA_CHECK_STATUS
, &status
,
2652 if (!(status
& QCA_PATCH_UPDATED
)) {
2653 err
= btusb_setup_qca_load_rampatch(hdev
, &ver
, info
);
2658 if (!(status
& QCA_SYSCFG_UPDATED
)) {
2659 err
= btusb_setup_qca_load_nvm(hdev
, &ver
, info
);
2667 #ifdef CONFIG_BT_HCIBTUSB_BCM
2668 static inline int __set_diag_interface(struct hci_dev
*hdev
)
2670 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2671 struct usb_interface
*intf
= data
->diag
;
2677 data
->diag_tx_ep
= NULL
;
2678 data
->diag_rx_ep
= NULL
;
2680 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
2681 struct usb_endpoint_descriptor
*ep_desc
;
2683 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
2685 if (!data
->diag_tx_ep
&& usb_endpoint_is_bulk_out(ep_desc
)) {
2686 data
->diag_tx_ep
= ep_desc
;
2690 if (!data
->diag_rx_ep
&& usb_endpoint_is_bulk_in(ep_desc
)) {
2691 data
->diag_rx_ep
= ep_desc
;
2696 if (!data
->diag_tx_ep
|| !data
->diag_rx_ep
) {
2697 BT_ERR("%s invalid diagnostic descriptors", hdev
->name
);
2704 static struct urb
*alloc_diag_urb(struct hci_dev
*hdev
, bool enable
)
2706 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2707 struct sk_buff
*skb
;
2711 if (!data
->diag_tx_ep
)
2712 return ERR_PTR(-ENODEV
);
2714 urb
= usb_alloc_urb(0, GFP_KERNEL
);
2716 return ERR_PTR(-ENOMEM
);
2718 skb
= bt_skb_alloc(2, GFP_KERNEL
);
2721 return ERR_PTR(-ENOMEM
);
2724 *skb_put(skb
, 1) = 0xf0;
2725 *skb_put(skb
, 1) = enable
;
2727 pipe
= usb_sndbulkpipe(data
->udev
, data
->diag_tx_ep
->bEndpointAddress
);
2729 usb_fill_bulk_urb(urb
, data
->udev
, pipe
,
2730 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
2732 skb
->dev
= (void *)hdev
;
2737 static int btusb_bcm_set_diag(struct hci_dev
*hdev
, bool enable
)
2739 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2745 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
2748 urb
= alloc_diag_urb(hdev
, enable
);
2750 return PTR_ERR(urb
);
2752 return submit_or_queue_tx_urb(hdev
, urb
);
2756 static int btusb_probe(struct usb_interface
*intf
,
2757 const struct usb_device_id
*id
)
2759 struct usb_endpoint_descriptor
*ep_desc
;
2760 struct btusb_data
*data
;
2761 struct hci_dev
*hdev
;
2762 unsigned ifnum_base
;
2765 BT_DBG("intf %p id %p", intf
, id
);
2767 /* interface numbers are hardcoded in the spec */
2768 if (intf
->cur_altsetting
->desc
.bInterfaceNumber
!= 0) {
2769 if (!(id
->driver_info
& BTUSB_IFNUM_2
))
2771 if (intf
->cur_altsetting
->desc
.bInterfaceNumber
!= 2)
2775 ifnum_base
= intf
->cur_altsetting
->desc
.bInterfaceNumber
;
2777 if (!id
->driver_info
) {
2778 const struct usb_device_id
*match
;
2780 match
= usb_match_id(intf
, blacklist_table
);
2785 if (id
->driver_info
== BTUSB_IGNORE
)
2788 if (id
->driver_info
& BTUSB_ATH3012
) {
2789 struct usb_device
*udev
= interface_to_usbdev(intf
);
2791 /* Old firmware would otherwise let ath3k driver load
2792 * patch and sysconfig files */
2793 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) <= 0x0001)
2797 data
= devm_kzalloc(&intf
->dev
, sizeof(*data
), GFP_KERNEL
);
2801 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
2802 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
2804 if (!data
->intr_ep
&& usb_endpoint_is_int_in(ep_desc
)) {
2805 data
->intr_ep
= ep_desc
;
2809 if (!data
->bulk_tx_ep
&& usb_endpoint_is_bulk_out(ep_desc
)) {
2810 data
->bulk_tx_ep
= ep_desc
;
2814 if (!data
->bulk_rx_ep
&& usb_endpoint_is_bulk_in(ep_desc
)) {
2815 data
->bulk_rx_ep
= ep_desc
;
2820 if (!data
->intr_ep
|| !data
->bulk_tx_ep
|| !data
->bulk_rx_ep
)
2823 if (id
->driver_info
& BTUSB_AMP
) {
2824 data
->cmdreq_type
= USB_TYPE_CLASS
| 0x01;
2825 data
->cmdreq
= 0x2b;
2827 data
->cmdreq_type
= USB_TYPE_CLASS
;
2828 data
->cmdreq
= 0x00;
2831 data
->udev
= interface_to_usbdev(intf
);
2834 INIT_WORK(&data
->work
, btusb_work
);
2835 INIT_WORK(&data
->waker
, btusb_waker
);
2836 init_usb_anchor(&data
->deferred
);
2837 init_usb_anchor(&data
->tx_anchor
);
2838 spin_lock_init(&data
->txlock
);
2840 init_usb_anchor(&data
->intr_anchor
);
2841 init_usb_anchor(&data
->bulk_anchor
);
2842 init_usb_anchor(&data
->isoc_anchor
);
2843 init_usb_anchor(&data
->diag_anchor
);
2844 spin_lock_init(&data
->rxlock
);
2846 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
2847 data
->recv_event
= btusb_recv_event_intel
;
2848 data
->recv_bulk
= btusb_recv_bulk_intel
;
2849 set_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2851 data
->recv_event
= hci_recv_frame
;
2852 data
->recv_bulk
= btusb_recv_bulk
;
2855 hdev
= hci_alloc_dev();
2859 hdev
->bus
= HCI_USB
;
2860 hci_set_drvdata(hdev
, data
);
2862 if (id
->driver_info
& BTUSB_AMP
)
2863 hdev
->dev_type
= HCI_AMP
;
2865 hdev
->dev_type
= HCI_BREDR
;
2869 SET_HCIDEV_DEV(hdev
, &intf
->dev
);
2871 hdev
->open
= btusb_open
;
2872 hdev
->close
= btusb_close
;
2873 hdev
->flush
= btusb_flush
;
2874 hdev
->send
= btusb_send_frame
;
2875 hdev
->notify
= btusb_notify
;
2877 if (id
->driver_info
& BTUSB_BCM2045
)
2878 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
, &hdev
->quirks
);
2880 if (id
->driver_info
& BTUSB_BCM92035
)
2881 hdev
->setup
= btusb_setup_bcm92035
;
2883 #ifdef CONFIG_BT_HCIBTUSB_BCM
2884 if (id
->driver_info
& BTUSB_BCM_PATCHRAM
) {
2885 hdev
->manufacturer
= 15;
2886 hdev
->setup
= btbcm_setup_patchram
;
2887 hdev
->set_diag
= btusb_bcm_set_diag
;
2888 hdev
->set_bdaddr
= btbcm_set_bdaddr
;
2890 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2891 data
->diag
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 2);
2894 if (id
->driver_info
& BTUSB_BCM_APPLE
) {
2895 hdev
->manufacturer
= 15;
2896 hdev
->setup
= btbcm_setup_apple
;
2897 hdev
->set_diag
= btusb_bcm_set_diag
;
2899 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2900 data
->diag
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 2);
2904 if (id
->driver_info
& BTUSB_INTEL
) {
2905 hdev
->manufacturer
= 2;
2906 hdev
->setup
= btusb_setup_intel
;
2907 hdev
->shutdown
= btusb_shutdown_intel
;
2908 hdev
->set_diag
= btintel_set_diag_mfg
;
2909 hdev
->set_bdaddr
= btintel_set_bdaddr
;
2910 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2911 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2912 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG
, &hdev
->quirks
);
2915 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
2916 hdev
->manufacturer
= 2;
2917 hdev
->send
= btusb_send_frame_intel
;
2918 hdev
->setup
= btusb_setup_intel_new
;
2919 hdev
->hw_error
= btintel_hw_error
;
2920 hdev
->set_diag
= btintel_set_diag
;
2921 hdev
->set_bdaddr
= btintel_set_bdaddr
;
2922 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2923 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG
, &hdev
->quirks
);
2926 if (id
->driver_info
& BTUSB_MARVELL
)
2927 hdev
->set_bdaddr
= btusb_set_bdaddr_marvell
;
2929 if (id
->driver_info
& BTUSB_SWAVE
) {
2930 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE
, &hdev
->quirks
);
2931 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS
, &hdev
->quirks
);
2934 if (id
->driver_info
& BTUSB_INTEL_BOOT
)
2935 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
2937 if (id
->driver_info
& BTUSB_ATH3012
) {
2938 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
2939 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2940 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2943 if (id
->driver_info
& BTUSB_QCA_ROME
) {
2944 data
->setup_on_usb
= btusb_setup_qca
;
2945 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
2948 #ifdef CONFIG_BT_HCIBTUSB_RTL
2949 if (id
->driver_info
& BTUSB_REALTEK
) {
2950 hdev
->setup
= btrtl_setup_realtek
;
2952 /* Realtek devices lose their updated firmware over suspend,
2953 * but the USB hub doesn't notice any status change.
2954 * Explicitly request a device reset on resume.
2956 set_bit(BTUSB_RESET_RESUME
, &data
->flags
);
2960 if (id
->driver_info
& BTUSB_AMP
) {
2961 /* AMP controllers do not support SCO packets */
2964 /* Interface orders are hardcoded in the specification */
2965 data
->isoc
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 1);
2969 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2971 if (force_scofix
|| id
->driver_info
& BTUSB_WRONG_SCO_MTU
) {
2972 if (!disable_scofix
)
2973 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE
, &hdev
->quirks
);
2976 if (id
->driver_info
& BTUSB_BROKEN_ISOC
)
2979 if (id
->driver_info
& BTUSB_DIGIANSWER
) {
2980 data
->cmdreq_type
= USB_TYPE_VENDOR
;
2981 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2984 if (id
->driver_info
& BTUSB_CSR
) {
2985 struct usb_device
*udev
= data
->udev
;
2986 u16 bcdDevice
= le16_to_cpu(udev
->descriptor
.bcdDevice
);
2988 /* Old firmware would otherwise execute USB reset */
2989 if (bcdDevice
< 0x117)
2990 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2992 /* Fake CSR devices with broken commands */
2993 if (bcdDevice
<= 0x100 || bcdDevice
== 0x134)
2994 hdev
->setup
= btusb_setup_csr
;
2996 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2999 if (id
->driver_info
& BTUSB_SNIFFER
) {
3000 struct usb_device
*udev
= data
->udev
;
3002 /* New sniffer firmware has crippled HCI interface */
3003 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) > 0x997)
3004 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
3007 if (id
->driver_info
& BTUSB_INTEL_BOOT
) {
3008 /* A bug in the bootloader causes that interrupt interface is
3009 * only enabled after receiving SetInterface(0, AltSetting=0).
3011 err
= usb_set_interface(data
->udev
, 0, 0);
3013 BT_ERR("failed to set interface 0, alt 0 %d", err
);
3020 err
= usb_driver_claim_interface(&btusb_driver
,
3028 #ifdef CONFIG_BT_HCIBTUSB_BCM
3030 if (!usb_driver_claim_interface(&btusb_driver
,
3032 __set_diag_interface(hdev
);
3038 err
= hci_register_dev(hdev
);
3044 usb_set_intfdata(intf
, data
);
3049 static void btusb_disconnect(struct usb_interface
*intf
)
3051 struct btusb_data
*data
= usb_get_intfdata(intf
);
3052 struct hci_dev
*hdev
;
3054 BT_DBG("intf %p", intf
);
3060 usb_set_intfdata(data
->intf
, NULL
);
3063 usb_set_intfdata(data
->isoc
, NULL
);
3066 usb_set_intfdata(data
->diag
, NULL
);
3068 hci_unregister_dev(hdev
);
3070 if (intf
== data
->intf
) {
3072 usb_driver_release_interface(&btusb_driver
, data
->isoc
);
3074 usb_driver_release_interface(&btusb_driver
, data
->diag
);
3075 } else if (intf
== data
->isoc
) {
3077 usb_driver_release_interface(&btusb_driver
, data
->diag
);
3078 usb_driver_release_interface(&btusb_driver
, data
->intf
);
3079 } else if (intf
== data
->diag
) {
3080 usb_driver_release_interface(&btusb_driver
, data
->intf
);
3082 usb_driver_release_interface(&btusb_driver
, data
->isoc
);
3089 static int btusb_suspend(struct usb_interface
*intf
, pm_message_t message
)
3091 struct btusb_data
*data
= usb_get_intfdata(intf
);
3093 BT_DBG("intf %p", intf
);
3095 if (data
->suspend_count
++)
3098 spin_lock_irq(&data
->txlock
);
3099 if (!(PMSG_IS_AUTO(message
) && data
->tx_in_flight
)) {
3100 set_bit(BTUSB_SUSPENDING
, &data
->flags
);
3101 spin_unlock_irq(&data
->txlock
);
3103 spin_unlock_irq(&data
->txlock
);
3104 data
->suspend_count
--;
3108 cancel_work_sync(&data
->work
);
3110 btusb_stop_traffic(data
);
3111 usb_kill_anchored_urbs(&data
->tx_anchor
);
3113 /* Optionally request a device reset on resume, but only when
3114 * wakeups are disabled. If wakeups are enabled we assume the
3115 * device will stay powered up throughout suspend.
3117 if (test_bit(BTUSB_RESET_RESUME
, &data
->flags
) &&
3118 !device_may_wakeup(&data
->udev
->dev
))
3119 data
->udev
->reset_resume
= 1;
3124 static void play_deferred(struct btusb_data
*data
)
3129 while ((urb
= usb_get_from_anchor(&data
->deferred
))) {
3130 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
3134 data
->tx_in_flight
++;
3136 usb_scuttle_anchored_urbs(&data
->deferred
);
3139 static int btusb_resume(struct usb_interface
*intf
)
3141 struct btusb_data
*data
= usb_get_intfdata(intf
);
3142 struct hci_dev
*hdev
= data
->hdev
;
3145 BT_DBG("intf %p", intf
);
3147 if (--data
->suspend_count
)
3150 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
3153 if (test_bit(BTUSB_INTR_RUNNING
, &data
->flags
)) {
3154 err
= btusb_submit_intr_urb(hdev
, GFP_NOIO
);
3156 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
3161 if (test_bit(BTUSB_BULK_RUNNING
, &data
->flags
)) {
3162 err
= btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3164 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
3168 btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3171 if (test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
3172 if (btusb_submit_isoc_urb(hdev
, GFP_NOIO
) < 0)
3173 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
3175 btusb_submit_isoc_urb(hdev
, GFP_NOIO
);
3178 spin_lock_irq(&data
->txlock
);
3179 play_deferred(data
);
3180 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3181 spin_unlock_irq(&data
->txlock
);
3182 schedule_work(&data
->work
);
3187 usb_scuttle_anchored_urbs(&data
->deferred
);
3189 spin_lock_irq(&data
->txlock
);
3190 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3191 spin_unlock_irq(&data
->txlock
);
3197 static struct usb_driver btusb_driver
= {
3199 .probe
= btusb_probe
,
3200 .disconnect
= btusb_disconnect
,
3202 .suspend
= btusb_suspend
,
3203 .resume
= btusb_resume
,
3205 .id_table
= btusb_table
,
3206 .supports_autosuspend
= 1,
3207 .disable_hub_initiated_lpm
= 1,
3210 module_usb_driver(btusb_driver
);
3212 module_param(disable_scofix
, bool, 0644);
3213 MODULE_PARM_DESC(disable_scofix
, "Disable fixup of wrong SCO buffer size");
3215 module_param(force_scofix
, bool, 0644);
3216 MODULE_PARM_DESC(force_scofix
, "Force fixup of wrong SCO buffers size");
3218 module_param(reset
, bool, 0644);
3219 MODULE_PARM_DESC(reset
, "Send HCI reset command on initialization");
3221 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3222 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION
);
3223 MODULE_VERSION(VERSION
);
3224 MODULE_LICENSE("GPL");