drivers/bus/Kconfig

   1 #
   2 # Bus Devices
   3 #
   4
   5 menu "Bus devices"
   6
   7 config ARM_CCI
   8         bool
   9
  10 config ARM_CCI_PMU
  11         bool
  12         select ARM_CCI
  13
  14 config ARM_CCI400_COMMON
  15         bool
  16         select ARM_CCI
  17
  18 config ARM_CCI400_PMU
  19         bool "ARM CCI400 PMU support"
  20         depends on (ARM && CPU_V7) || ARM64
  21         depends on PERF_EVENTS
  22         select ARM_CCI400_COMMON
  23         select ARM_CCI_PMU
  24         help
  25           Support for PMU events monitoring on the ARM CCI-400 (cache coherent
  26           interconnect). CCI-400 supports counting events related to the
  27           connected slave/master interfaces.
  28
  29 config ARM_CCI400_PORT_CTRL
  30         bool
  31         depends on ARM && OF && CPU_V7
  32         select ARM_CCI400_COMMON
  33         help
  34           Low level power management driver for CCI400 cache coherent
  35           interconnect for ARM platforms.
  36
  37 config ARM_CCI5xx_PMU
  38         bool "ARM CCI-500/CCI-550 PMU support"
  39         depends on (ARM && CPU_V7) || ARM64
  40         depends on PERF_EVENTS
  41         select ARM_CCI_PMU
  42         help
  43           Support for PMU events monitoring on the ARM CCI-500/CCI-550 cache
  44           coherent interconnects. Both of them provide 8 independent event counters,
  45           which can count events pertaining to the slave/master interfaces as well
  46           as the internal events to the CCI.
  47
  48           If unsure, say Y
  49
  50 config ARM_CCN
  51         tristate "ARM CCN driver support"
  52         depends on ARM || ARM64
  53         depends on PERF_EVENTS
  54         help
  55           PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)
  56           interconnect.
  57
  58 config BRCMSTB_GISB_ARB
  59         bool "Broadcom STB GISB bus arbiter"
  60         depends on ARM || MIPS
  61         default ARCH_BRCMSTB || BMIPS_GENERIC
  62         help
  63           Driver for the Broadcom Set Top Box System-on-a-chip internal bus
  64           arbiter. This driver provides timeout and target abort error handling
  65           and internal bus master decoding.
  66
  67 config IMX_WEIM
  68         bool "Freescale EIM DRIVER"
  69         depends on ARCH_MXC
  70         help
  71           Driver for i.MX WEIM controller.
  72           The WEIM(Wireless External Interface Module) works like a bus.
  73           You can attach many different devices on it, such as NOR, onenand.
  74
  75 config MIPS_CDMM
  76         bool "MIPS Common Device Memory Map (CDMM) Driver"
  77         depends on CPU_MIPSR2
  78         help
  79           Driver needed for the MIPS Common Device Memory Map bus in MIPS
  80           cores. This bus is for per-CPU tightly coupled devices such as the
  81           Fast Debug Channel (FDC).
  82
  83           For this to work, either your bootloader needs to enable the CDMM
  84           region at an unused physical address on the boot CPU, or else your
  85           platform code needs to implement mips_cdmm_phys_base() (see
  86           asm/cdmm.h).
  87
  88 config MVEBU_MBUS
  89         bool
  90         depends on PLAT_ORION
  91         help
  92           Driver needed for the MBus configuration on Marvell EBU SoCs
  93           (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
  94
  95 config OMAP_INTERCONNECT
  96         tristate "OMAP INTERCONNECT DRIVER"
  97         depends on ARCH_OMAP2PLUS
  98
  99         help
 100           Driver to enable OMAP interconnect error handling driver.
 101
 102 config OMAP_OCP2SCP
 103         tristate "OMAP OCP2SCP DRIVER"
 104         depends on ARCH_OMAP2PLUS
 105         help
 106           Driver to enable ocp2scp module which transforms ocp interface
 107           protocol to scp protocol. In OMAP4, USB PHY is connected via
 108           OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
 109           OCP2SCP.
 110
 111 config QCOM_EBI2
 112         bool "Qualcomm External Bus Interface 2 (EBI2)"
 113         depends on HAS_IOMEM
 114         depends on ARCH_QCOM || COMPILE_TEST
 115         help
 116           Say y here to enable support for the Qualcomm External Bus
 117           Interface 2, which can be used to connect things like NAND Flash,
 118           SRAM, ethernet adapters, FPGAs and LCD displays.
 119
 120 config SIMPLE_PM_BUS
 121         bool "Simple Power-Managed Bus Driver"
 122         depends on OF && PM
 123         depends on ARCH_RENESAS || COMPILE_TEST
 124         help
 125           Driver for transparent busses that don't need a real driver, but
 126           where the bus controller is part of a PM domain, or under the control
 127           of a functional clock, and thus relies on runtime PM for managing
 128           this PM domain and/or clock.
 129           An example of such a bus controller is the Renesas Bus State
 130           Controller (BSC, sometimes called "LBSC within Bus Bridge", or
 131           "External Bus Interface") as found on several Renesas ARM SoCs.
 132
 133 config SUNXI_RSB
 134         tristate "Allwinner sunXi Reduced Serial Bus Driver"
 135           default MACH_SUN8I || MACH_SUN9I
 136           depends on ARCH_SUNXI
 137           select REGMAP
 138           help
 139           Say y here to enable support for Allwinner's Reduced Serial Bus
 140           (RSB) support. This controller is responsible for communicating
 141           with various RSB based devices, such as AXP223, AXP8XX PMICs,
 142           and AC100/AC200 ICs.
 143
 144 config TEGRA_ACONNECT
 145         tristate "Tegra ACONNECT Bus Driver"
 146         depends on ARCH_TEGRA_210_SOC
 147         depends on OF && PM
 148         select PM_CLK
 149         help
 150           Driver for the Tegra ACONNECT bus which is used to interface with
 151           the devices inside the Audio Processing Engine (APE) for Tegra210.
 152
 153 config UNIPHIER_SYSTEM_BUS
 154         tristate "UniPhier System Bus driver"
 155         depends on ARCH_UNIPHIER && OF
 156         default y
 157         help
 158           Support for UniPhier System Bus, a simple external bus.  This is
 159           needed to use on-board devices connected to UniPhier SoCs.
 160
 161 config VEXPRESS_CONFIG
 162         bool "Versatile Express configuration bus"
 163         default y if ARCH_VEXPRESS
 164         depends on ARM || ARM64
 165         depends on OF
 166         select REGMAP
 167         help
 168           Platform configuration infrastructure for the ARM Ltd.
 169           Versatile Express.
 170 endmenu