Linux-2.6.12-rc2

[mirror_ubuntu-artful-kernel.git] / drivers / char / ftape / lowlevel / ftape-ctl.c

/*
 *      Copyright (C) 1993-1996 Bas Laarhoven,
 *                    1996-1997 Claus-Justus Heine.

 This program is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation; either version 2, or (at your option)
 any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program; see the file COPYING.  If not, write to
 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

 *
 * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-ctl.c,v $
 * $Revision: 1.4 $
 * $Date: 1997/11/11 14:37:44 $
 *
 *      This file contains the non-read/write ftape functions for the
 *      QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux.
 */

#include <linux/config.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/mman.h>

#include <linux/ftape.h>
#include <linux/qic117.h>
#include <asm/uaccess.h>
#include <asm/io.h>

/* ease porting between pre-2.4.x and later kernels */
#define vma_get_pgoff(v)      ((v)->vm_pgoff)

#include "../lowlevel/ftape-tracing.h"
#include "../lowlevel/ftape-io.h"
#include "../lowlevel/ftape-ctl.h"
#include "../lowlevel/ftape-write.h"
#include "../lowlevel/ftape-read.h"
#include "../lowlevel/ftape-rw.h"
#include "../lowlevel/ftape-bsm.h"

/*      Global vars.
 */
ftape_info ftape_status = {
/*  vendor information */
        { 0, },     /* drive type */
/*  data rates */
        500,        /* used data rate */
        500,        /* drive max rate */
        500,        /* fdc max rate   */
/*  drive selection, either FTAPE_SEL_A/B/C/D */
        -1,     /* drive selection */
/*  flags set after decode the drive and tape status   */
        0,          /* formatted */
        1,          /* no tape */
        1,          /* write protected */
        1,          /* new tape */
/*  values of last queried drive/tape status and error */
        {{0,}},     /* last error code */
        {{0,}},     /* drive status, configuration, tape status */
/*  cartridge geometry */
        20,         /* tracks_per_tape */
        102,        /* segments_per_track */
/*  location of header segments, etc. */
        -1,     /* used_header_segment */
        -1,     /* header_segment_1 */
        -1,     /* header_segment_2 */
        -1,     /* first_data_segment */
        -1,     /* last_data_segment */
/*  the format code as stored in the header segment  */
        fmt_normal, /* format code */
/*  the default for the qic std: unknown */
        -1,
/*  is tape running? */
        idle,       /* runner_state */
/*  is tape reading/writing/verifying/formatting/deleting */
        idle,       /* driver state */
/*  flags fatal hardware error */
        1,          /* failure */
/*  history record */
        { 0, }      /* history record */
};
        
int ftape_segments_per_head     = 1020;
int ftape_segments_per_cylinder = 4;
int ftape_init_drive_needed = 1; /* need to be global for ftape_reset_drive()
                                  * in ftape-io.c
                                  */

/*      Local vars.
 */
static const vendor_struct vendors[] = QIC117_VENDORS;
static const wakeup_method methods[] = WAKEUP_METHODS;

const ftape_info *ftape_get_status(void)
{
#if defined(STATUS_PARANOYA)
        static ftape_info get_status;

        get_status = ftape_status;
        return &get_status;
#else
        return &ftape_status; /*  maybe return only a copy of it to assure 
                               *  read only access
                               */
#endif
}

static int ftape_not_operational(int status)
{
        /* return true if status indicates tape can not be used.
         */
        return ((status ^ QIC_STATUS_CARTRIDGE_PRESENT) &
                (QIC_STATUS_ERROR |
                 QIC_STATUS_CARTRIDGE_PRESENT |
                 QIC_STATUS_NEW_CARTRIDGE));
}

int ftape_seek_to_eot(void)
{
        int status;
        TRACE_FUN(ft_t_any);

        TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),);
        while ((status & QIC_STATUS_AT_EOT) == 0) {
                if (ftape_not_operational(status)) {
                        TRACE_EXIT -EIO;
                }
                TRACE_CATCH(ftape_command_wait(QIC_PHYSICAL_FORWARD,
                                               ftape_timeout.rewind,&status),);
        }
        TRACE_EXIT 0;
}

int ftape_seek_to_bot(void)
{
        int status;
        TRACE_FUN(ft_t_any);

        TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),);
        while ((status & QIC_STATUS_AT_BOT) == 0) {
                if (ftape_not_operational(status)) {
                        TRACE_EXIT -EIO;
                }
                TRACE_CATCH(ftape_command_wait(QIC_PHYSICAL_REVERSE,
                                               ftape_timeout.rewind,&status),);
        }
        TRACE_EXIT 0;
}

static int ftape_new_cartridge(void)
{
        ft_location.track = -1; /* force seek on first access */
        ftape_zap_read_buffers();
        ftape_zap_write_buffers();
        return 0;
}

int ftape_abort_operation(void)
{
        int result = 0;
        int status;
        TRACE_FUN(ft_t_flow);

        if (ft_runner_status == running) {
                TRACE(ft_t_noise, "aborting runner, waiting");
                
                ft_runner_status = do_abort;
                /* set timeout so that the tape will run to logical EOT
                 * if we missed the last sector and there are no queue pulses.
                 */
                result = ftape_dumb_stop();
        }
        if (ft_runner_status != idle) {
                if (ft_runner_status == do_abort) {
                        TRACE(ft_t_noise, "forcing runner abort");
                }
                TRACE(ft_t_noise, "stopping tape");
                result = ftape_stop_tape(&status);
                ft_location.known = 0;
                ft_runner_status  = idle;
        }
        ftape_reset_buffer();
        ftape_zap_read_buffers();
        ftape_set_state(idle);
        TRACE_EXIT result;
}

static int lookup_vendor_id(unsigned int vendor_id)
{
        int i = 0;

        while (vendors[i].vendor_id != vendor_id) {
                if (++i >= NR_ITEMS(vendors)) {
                        return -1;
                }
        }
        return i;
}

static void ftape_detach_drive(void)
{
        TRACE_FUN(ft_t_any);

        TRACE(ft_t_flow, "disabling tape drive and fdc");
        ftape_put_drive_to_sleep(ft_drive_type.wake_up);
        fdc_catch_stray_interrupts(1);  /* one always comes */
        fdc_disable();
        fdc_release_irq_and_dma();
        fdc_release_regions();
        TRACE_EXIT;
}

static void clear_history(void)
{
        ft_history.used = 0;
        ft_history.id_am_errors =
                ft_history.id_crc_errors =
                ft_history.data_am_errors =
                ft_history.data_crc_errors =
                ft_history.overrun_errors =
                ft_history.no_data_errors =
                ft_history.retries =
                ft_history.crc_errors =
                ft_history.crc_failures =
                ft_history.ecc_failures =
                ft_history.corrected =
                ft_history.defects =
                ft_history.rewinds = 0;
}

static int ftape_activate_drive(vendor_struct * drive_type)
{
        int result = 0;
        TRACE_FUN(ft_t_flow);

        /* If we already know the drive type, wake it up.
         * Else try to find out what kind of drive is attached.
         */
        if (drive_type->wake_up != unknown_wake_up) {
                TRACE(ft_t_flow, "enabling tape drive and fdc");
                result = ftape_wakeup_drive(drive_type->wake_up);
                if (result < 0) {
                        TRACE(ft_t_err, "known wakeup method failed");
                }
        } else {
                wake_up_types method;
                const ft_trace_t old_tracing = TRACE_LEVEL;
                if (TRACE_LEVEL < ft_t_flow) {
                        SET_TRACE_LEVEL(ft_t_bug);
                }

                /*  Try to awaken the drive using all known methods.
                 *  Lower tracing for a while.
                 */
                for (method=no_wake_up; method < NR_ITEMS(methods); ++method) {
                        drive_type->wake_up = method;
#ifdef CONFIG_FT_TWO_DRIVES
                        /*  Test setup for dual drive configuration.
                         *  /dev/rft2 uses mountain wakeup
                         *  /dev/rft3 uses colorado wakeup
                         *  Other systems will use the normal scheme.
                         */
                        if ((ft_drive_sel < 2)                            ||
                            (ft_drive_sel == 2 && method == FT_WAKE_UP_1) ||
                            (ft_drive_sel == 3 && method == FT_WAKE_UP_2)) {
                                result=ftape_wakeup_drive(drive_type->wake_up);
                        } else {
                                result = -EIO;
                        }
#else
                        result = ftape_wakeup_drive(drive_type->wake_up);
#endif
                        if (result >= 0) {
                                TRACE(ft_t_warn, "drive wakeup method: %s",
                                      methods[drive_type->wake_up].name);
                                break;
                        }
                }
                SET_TRACE_LEVEL(old_tracing);

                if (method >= NR_ITEMS(methods)) {
                        /* no response at all, cannot open this drive */
                        drive_type->wake_up = unknown_wake_up;
                        TRACE(ft_t_err, "no tape drive found !");
                        result = -ENODEV;
                }
        }
        TRACE_EXIT result;
}

static int ftape_get_drive_status(void)
{
        int result;
        int status;
        TRACE_FUN(ft_t_flow);

        ft_no_tape = ft_write_protected = 0;
        /*    Tape drive is activated now.
         *    First clear error status if present.
         */
        do {
                result = ftape_ready_wait(ftape_timeout.reset, &status);
                if (result < 0) {
                        if (result == -ETIME) {
                                TRACE(ft_t_err, "ftape_ready_wait timeout");
                        } else if (result == -EINTR) {
                                TRACE(ft_t_err, "ftape_ready_wait aborted");
                        } else {
                                TRACE(ft_t_err, "ftape_ready_wait failed");
                        }
                        TRACE_EXIT -EIO;
                }
                /*  Clear error condition (drive is ready !)
                 */
                if (status & QIC_STATUS_ERROR) {
                        unsigned int error;
                        qic117_cmd_t command;

                        TRACE(ft_t_err, "error status set");
                        result = ftape_report_error(&error, &command, 1);
                        if (result < 0) {
                                TRACE(ft_t_err,
                                      "report_error_code failed: %d", result);
                                /* hope it's working next time */
                                ftape_reset_drive();
                                TRACE_EXIT -EIO;
                        } else if (error != 0) {
                                TRACE(ft_t_noise, "error code   : %d", error);
                                TRACE(ft_t_noise, "error command: %d", command);
                        }
                }
                if (status & QIC_STATUS_NEW_CARTRIDGE) {
                        unsigned int error;
                        qic117_cmd_t command;
                        const ft_trace_t old_tracing = TRACE_LEVEL;
                        SET_TRACE_LEVEL(ft_t_bug);

                        /*  Undocumented feature: Must clear (not present!)
                         *  error here or we'll fail later.
                         */
                        ftape_report_error(&error, &command, 1);

                        SET_TRACE_LEVEL(old_tracing);
                        TRACE(ft_t_info, "status: new cartridge");
                        ft_new_tape = 1;
                } else {
                        ft_new_tape = 0;
                }
                FT_SIGNAL_EXIT(_DONT_BLOCK);
        } while (status & QIC_STATUS_ERROR);
        
        ft_no_tape = !(status & QIC_STATUS_CARTRIDGE_PRESENT);
        ft_write_protected = (status & QIC_STATUS_WRITE_PROTECT) != 0;
        if (ft_no_tape) {
                TRACE(ft_t_warn, "no cartridge present");
        } else {
                if (ft_write_protected) {
                        TRACE(ft_t_noise, "Write protected cartridge");
                }
        }
        TRACE_EXIT 0;
}

static void ftape_log_vendor_id(void)
{
        int vendor_index;
        TRACE_FUN(ft_t_flow);

        ftape_report_vendor_id(&ft_drive_type.vendor_id);
        vendor_index = lookup_vendor_id(ft_drive_type.vendor_id);
        if (ft_drive_type.vendor_id == UNKNOWN_VENDOR &&
            ft_drive_type.wake_up == wake_up_colorado) {
                vendor_index = 0;
                /* hack to get rid of all this mail */
                ft_drive_type.vendor_id = 0;
        }
        if (vendor_index < 0) {
                /* Unknown vendor id, first time opening device.  The
                 * drive_type remains set to type found at wakeup
                 * time, this will probably keep the driver operating
                 * for this new vendor.  
                 */
                TRACE(ft_t_warn, "\n"
                      KERN_INFO "============ unknown vendor id ===========\n"
                      KERN_INFO "A new, yet unsupported tape drive is found\n"
                      KERN_INFO "Please report the following values:\n"
                      KERN_INFO "   Vendor id     : 0x%04x\n"
                      KERN_INFO "   Wakeup method : %s\n"
                      KERN_INFO "And a description of your tape drive\n"
                      KERN_INFO "to "THE_FTAPE_MAINTAINER"\n"
                      KERN_INFO "==========================================",
                      ft_drive_type.vendor_id,
                      methods[ft_drive_type.wake_up].name);
                ft_drive_type.speed = 0;                /* unknown */
        } else {
                ft_drive_type.name  = vendors[vendor_index].name;
                ft_drive_type.speed = vendors[vendor_index].speed;
                TRACE(ft_t_info, "tape drive type: %s", ft_drive_type.name);
                /* scan all methods for this vendor_id in table */
                while(ft_drive_type.wake_up != vendors[vendor_index].wake_up) {
                        if (vendor_index < NR_ITEMS(vendors) - 1 &&
                            vendors[vendor_index + 1].vendor_id 
                            == 
                            ft_drive_type.vendor_id) {
                                ++vendor_index;
                        } else {
                                break;
                        }
                }
                if (ft_drive_type.wake_up != vendors[vendor_index].wake_up) {
                        TRACE(ft_t_warn, "\n"
                     KERN_INFO "==========================================\n"
                     KERN_INFO "wakeup type mismatch:\n"
                     KERN_INFO "found: %s, expected: %s\n"
                     KERN_INFO "please report this to "THE_FTAPE_MAINTAINER"\n"
                     KERN_INFO "==========================================",
                              methods[ft_drive_type.wake_up].name,
                              methods[vendors[vendor_index].wake_up].name);
                }
        }
        TRACE_EXIT;
}

void ftape_calc_timeouts(unsigned int qic_std,
                         unsigned int data_rate,
                         unsigned int tape_len)
{
        int speed;              /* deci-ips ! */
        int ff_speed;
        int length;
        TRACE_FUN(ft_t_any);

        /*                           tape transport speed
         *  data rate:        QIC-40   QIC-80   QIC-3010 QIC-3020
         *
         *    250 Kbps        25 ips     n/a      n/a      n/a
         *    500 Kbps        50 ips   34 ips   22.6 ips   n/a
         *      1 Mbps          n/a    68 ips   45.2 ips 22.6 ips
         *      2 Mbps          n/a      n/a      n/a    45.2 ips
         *
         *  fast tape transport speed is at least 68 ips.
         */
        switch (qic_std) {
        case QIC_TAPE_QIC40:
                speed = (data_rate == 250) ? 250 : 500;
                break;
        case QIC_TAPE_QIC80:
                speed = (data_rate == 500) ? 340 : 680;
                break;
        case QIC_TAPE_QIC3010:
                speed = (data_rate == 500) ? 226 : 452;
                break;
        case QIC_TAPE_QIC3020:
                speed = (data_rate == 1000) ? 226 : 452;
                break;
        default:
                TRACE(ft_t_bug, "Unknown qic_std (bug) ?");
                speed = 500;
                break;
        }
        if (ft_drive_type.speed == 0) {
                unsigned long t0;
                static int dt = 0;     /* keep gcc from complaining */
                static int first_time = 1;

                /*  Measure the time it takes to wind to EOT and back to BOT.
                 *  If the tape length is known, calculate the rewind speed.
                 *  Else keep the time value for calculation of the rewind
                 *  speed later on, when the length _is_ known.
                 *  Ask for a report only when length and speed are both known.
                 */
                if (first_time) {
                        ftape_seek_to_bot();
                        t0 = jiffies;
                        ftape_seek_to_eot();
                        ftape_seek_to_bot();
                        dt = (int) (((jiffies - t0) * FT_USPT) / 1000);
                        if (dt < 1) {
                                dt = 1; /* prevent div by zero on failures */
                        }
                        first_time = 0;
                        TRACE(ft_t_info,
                              "trying to determine seek timeout, got %d msec",
                              dt);
                }
                if (tape_len != 0) {
                        ft_drive_type.speed = 
                                (2 * 12 * tape_len * 1000) / dt;
                        TRACE(ft_t_warn, "\n"
                     KERN_INFO "==========================================\n"
                     KERN_INFO "drive type: %s\n"
                     KERN_INFO "delta time = %d ms, length = %d ft\n"
                     KERN_INFO "has a maximum tape speed of %d ips\n"
                     KERN_INFO "please report this to "THE_FTAPE_MAINTAINER"\n"
                     KERN_INFO "==========================================",
                              ft_drive_type.name, dt, tape_len, 
                              ft_drive_type.speed);
                }
        }
        /*  Handle unknown length tapes as very long ones. We'll
         *  determine the actual length from a header segment later.
         *  This is normal for all modern (Wide,TR1/2/3) formats.
         */
        if (tape_len <= 0) {
                TRACE(ft_t_noise,
                      "Unknown tape length, using maximal timeouts");
                length = QIC_TOP_TAPE_LEN;      /* use worst case values */
        } else {
                length = tape_len;              /* use actual values */
        }
        if (ft_drive_type.speed == 0) {
                ff_speed = speed; 
        } else {
                ff_speed = ft_drive_type.speed;
        }
        /*  time to go from bot to eot at normal speed (data rate):
         *  time = (1+delta) * length (ft) * 12 (inch/ft) / speed (ips)
         *  delta = 10 % for seek speed, 20 % for rewind speed.
         */
        ftape_timeout.seek = (length * 132 * FT_SECOND) / speed;
        ftape_timeout.rewind = (length * 144 * FT_SECOND) / (10 * ff_speed);
        ftape_timeout.reset = 20 * FT_SECOND + ftape_timeout.rewind;
        TRACE(ft_t_noise, "timeouts for speed = %d, length = %d\n"
              KERN_INFO "seek timeout  : %d sec\n"
              KERN_INFO "rewind timeout: %d sec\n"
              KERN_INFO "reset timeout : %d sec",
              speed, length,
              (ftape_timeout.seek + 500) / 1000,
              (ftape_timeout.rewind + 500) / 1000,
              (ftape_timeout.reset + 500) / 1000);
        TRACE_EXIT;
}

/* This function calibrates the datarate (i.e. determines the maximal
 * usable data rate) and sets the global variable ft_qic_std to qic_std
 *
 */
int ftape_calibrate_data_rate(unsigned int qic_std)
{
        int rate = ft_fdc_rate_limit;
        int result;
        TRACE_FUN(ft_t_flow);

        ft_qic_std = qic_std;

        if (ft_qic_std == -1) {
                TRACE_ABORT(-EIO, ft_t_err,
                "Unable to determine data rate if QIC standard is unknown");
        }

        /*  Select highest rate supported by both fdc and drive.
         *  Start with highest rate supported by the fdc.
         */
        while (fdc_set_data_rate(rate) < 0 && rate > 250) {
                rate /= 2;
        }
        TRACE(ft_t_info,
              "Highest FDC supported data rate: %d Kbps", rate);
        ft_fdc_max_rate = rate;
        do {
                result = ftape_set_data_rate(rate, ft_qic_std);
        } while (result == -EINVAL && (rate /= 2) > 250);
        if (result < 0) {
                TRACE_ABORT(-EIO, ft_t_err, "set datarate failed");
        }
        ft_data_rate = rate;
        TRACE_EXIT 0;
}

static int ftape_init_drive(void)
{
        int status;
        qic_model model;
        unsigned int qic_std;
        unsigned int data_rate;
        TRACE_FUN(ft_t_flow);

        ftape_init_drive_needed = 0; /* don't retry if this fails ? */
        TRACE_CATCH(ftape_report_raw_drive_status(&status),);
        if (status & QIC_STATUS_CARTRIDGE_PRESENT) {
                if (!(status & QIC_STATUS_AT_BOT)) {
                        /*  Antique drives will get here after a soft reset,
                         *  modern ones only if the driver is loaded when the
                         *  tape wasn't rewound properly.
                         */
                        /* Tape should be at bot if new cartridge ! */
                        ftape_seek_to_bot();
                }
                if (!(status & QIC_STATUS_REFERENCED)) {
                        TRACE(ft_t_flow, "starting seek_load_point");
                        TRACE_CATCH(ftape_command_wait(QIC_SEEK_LOAD_POINT,
                                                       ftape_timeout.reset,
                                                       &status),);
                }
        }
        ft_formatted = (status & QIC_STATUS_REFERENCED) != 0;
        if (!ft_formatted) {
                TRACE(ft_t_warn, "Warning: tape is not formatted !");
        }

        /*  report configuration aborts when ftape_tape_len == -1
         *  unknown qic_std is okay if not formatted.
         */
        TRACE_CATCH(ftape_report_configuration(&model,
                                               &data_rate,
                                               &qic_std,
                                               &ftape_tape_len),);

        /*  Maybe add the following to the /proc entry
         */
        TRACE(ft_t_info, "%s drive @ %d Kbps",
              (model == prehistoric) ? "prehistoric" :
              ((model == pre_qic117c) ? "pre QIC-117C" :
               ((model == post_qic117b) ? "post QIC-117B" :
                "post QIC-117D")), data_rate);

        if (ft_formatted) {
                /*  initialize ft_used_data_rate to maximum value 
                 *  and set ft_qic_std
                 */
                TRACE_CATCH(ftape_calibrate_data_rate(qic_std),);
                if (ftape_tape_len == 0) {
                        TRACE(ft_t_info, "unknown length QIC-%s tape",
                              (ft_qic_std == QIC_TAPE_QIC40) ? "40" :
                              ((ft_qic_std == QIC_TAPE_QIC80) ? "80" :
                               ((ft_qic_std == QIC_TAPE_QIC3010) 
                                ? "3010" : "3020")));
                } else {
                        TRACE(ft_t_info, "%d ft. QIC-%s tape", ftape_tape_len,
                              (ft_qic_std == QIC_TAPE_QIC40) ? "40" :
                              ((ft_qic_std == QIC_TAPE_QIC80) ? "80" :
                               ((ft_qic_std == QIC_TAPE_QIC3010)
                                ? "3010" : "3020")));
                }
                ftape_calc_timeouts(ft_qic_std, ft_data_rate, ftape_tape_len);
                /* soft write-protect QIC-40/QIC-80 cartridges used with a
                 * Colorado T3000 drive. Buggy hardware!
                 */
                if ((ft_drive_type.vendor_id == 0x011c6) &&
                    ((ft_qic_std == QIC_TAPE_QIC40 ||
                      ft_qic_std == QIC_TAPE_QIC80) &&
                     !ft_write_protected)) {
                        TRACE(ft_t_warn, "\n"
        KERN_INFO "The famous Colorado T3000 bug:\n"
        KERN_INFO "%s drives can't write QIC40 and QIC80\n"
        KERN_INFO "cartridges but don't set the write-protect flag!",
                              ft_drive_type.name);
                        ft_write_protected = 1;
                }
        } else {
                /*  Doesn't make too much sense to set the data rate
                 *  because we don't know what to use for the write
                 *  precompensation.
                 *  Need to do this again when formatting the cartridge.
                 */
                ft_data_rate = data_rate;
                ftape_calc_timeouts(QIC_TAPE_QIC40,
                                    data_rate,
                                    ftape_tape_len);
        }
        ftape_new_cartridge();
        TRACE_EXIT 0;
}

static void ftape_munmap(void)
{
        int i;
        TRACE_FUN(ft_t_flow);
        
        for (i = 0; i < ft_nr_buffers; i++) {
                ft_buffer[i]->mmapped = 0;
        }
        TRACE_EXIT;
}

/*   Map the dma buffers into the virtual address range given by vma.
 *   We only check the caller doesn't map non-existent buffers. We
 *   don't check for multiple mappings.
 */
int ftape_mmap(struct vm_area_struct *vma)
{
        int num_buffers;
        int i;
        TRACE_FUN(ft_t_flow);
        
        if (ft_failure) {
                TRACE_EXIT -ENODEV;
        }
        if (!(vma->vm_flags & (VM_READ|VM_WRITE))) {
                TRACE_ABORT(-EINVAL, ft_t_err, "Undefined mmap() access");
        }
        if (vma_get_pgoff(vma) != 0) {
                TRACE_ABORT(-EINVAL, ft_t_err, "page offset must be 0");
        }
        if ((vma->vm_end - vma->vm_start) % FT_BUFF_SIZE != 0) {
                TRACE_ABORT(-EINVAL, ft_t_err,
                            "size = %ld, should be a multiple of %d",
                            vma->vm_end - vma->vm_start,
                            FT_BUFF_SIZE);
        }
        num_buffers = (vma->vm_end - vma->vm_start) / FT_BUFF_SIZE;
        if (num_buffers > ft_nr_buffers) {
                TRACE_ABORT(-EINVAL,
                            ft_t_err, "size = %ld, should be less than %d",
                            vma->vm_end - vma->vm_start,
                            ft_nr_buffers * FT_BUFF_SIZE);
        }
        if (ft_driver_state != idle) {
                /* this also clears the buffer states 
                 */
                ftape_abort_operation();
        } else {
                ftape_reset_buffer();
        }
        for (i = 0; i < num_buffers; i++) {
                unsigned long pfn;

                pfn = virt_to_phys(ft_buffer[i]->address) >> PAGE_SHIFT;
                TRACE_CATCH(remap_pfn_range(vma, vma->vm_start +
                                             i * FT_BUFF_SIZE,
                                             pfn,
                                             FT_BUFF_SIZE,
                                             vma->vm_page_prot),
                            _res = -EAGAIN);
                TRACE(ft_t_noise, "remapped dma buffer @ %p to location @ %p",
                      ft_buffer[i]->address,
                      (void *)(vma->vm_start + i * FT_BUFF_SIZE));
        }
        for (i = 0; i < num_buffers; i++) {
                memset(ft_buffer[i]->address, 0xAA, FT_BUFF_SIZE);
                ft_buffer[i]->mmapped++;
        }       
        TRACE_EXIT 0;
}

static void ftape_init_driver(void); /* forward declaration */

/*      OPEN routine called by kernel-interface code
 */
int ftape_enable(int drive_selection)
{
        TRACE_FUN(ft_t_any);

        if (ft_drive_sel == -1 || ft_drive_sel != drive_selection) {
                /* Other selection than last time
                 */
                ftape_init_driver();
        }
        ft_drive_sel = FTAPE_SEL(drive_selection);
        ft_failure = 0;
        TRACE_CATCH(fdc_init(),); /* init & detect fdc */
        TRACE_CATCH(ftape_activate_drive(&ft_drive_type),
                    fdc_disable();
                    fdc_release_irq_and_dma();
                    fdc_release_regions());
        TRACE_CATCH(ftape_get_drive_status(), ftape_detach_drive());
        if (ft_drive_type.vendor_id == UNKNOWN_VENDOR) {
                ftape_log_vendor_id();
        }
        if (ft_new_tape) {
                ftape_init_drive_needed = 1;
        }
        if (!ft_no_tape && ftape_init_drive_needed) {
                TRACE_CATCH(ftape_init_drive(), ftape_detach_drive());
        }
        ftape_munmap(); /* clear the mmap flag */
        clear_history();
        TRACE_EXIT 0;
}

/*   release routine called by the high level interface modules
 *   zftape or sftape.
 */
void ftape_disable(void)
{
        int i;
        TRACE_FUN(ft_t_any);

        for (i = 0; i < ft_nr_buffers; i++) {
                if (ft_buffer[i]->mmapped) {
                        TRACE(ft_t_noise, "first byte of buffer %d: 0x%02x",
                              i, *ft_buffer[i]->address);
                }
        }
        if (sigtestsetmask(&current->pending.signal, _DONT_BLOCK) && 
            !(sigtestsetmask(&current->pending.signal, _NEVER_BLOCK)) &&
            ftape_tape_running) {
                TRACE(ft_t_warn,
                      "Interrupted by fatal signal and tape still running");
                ftape_dumb_stop();
                ftape_abort_operation(); /* it's annoying */
        } else {
                ftape_set_state(idle);
        }
        ftape_detach_drive();
        if (ft_history.used) {
                TRACE(ft_t_info, "== Non-fatal errors this run: ==");
                TRACE(ft_t_info, "fdc isr statistics:\n"
                      KERN_INFO " id_am_errors     : %3d\n"
                      KERN_INFO " id_crc_errors    : %3d\n"
                      KERN_INFO " data_am_errors   : %3d\n"
                      KERN_INFO " data_crc_errors  : %3d\n"
                      KERN_INFO " overrun_errors   : %3d\n"
                      KERN_INFO " no_data_errors   : %3d\n"
                      KERN_INFO " retries          : %3d",
                      ft_history.id_am_errors,   ft_history.id_crc_errors,
                      ft_history.data_am_errors, ft_history.data_crc_errors,
                      ft_history.overrun_errors, ft_history.no_data_errors,
                      ft_history.retries);
                if (ft_history.used & 1) {
                        TRACE(ft_t_info, "ecc statistics:\n"
                              KERN_INFO " crc_errors       : %3d\n"
                              KERN_INFO " crc_failures     : %3d\n"
                              KERN_INFO " ecc_failures     : %3d\n"
                              KERN_INFO " sectors corrected: %3d",
                              ft_history.crc_errors,   ft_history.crc_failures,
                              ft_history.ecc_failures, ft_history.corrected);
                }
                if (ft_history.defects > 0) {
                        TRACE(ft_t_warn, "Warning: %d media defects!",
                              ft_history.defects);
                }
                if (ft_history.rewinds > 0) {
                        TRACE(ft_t_info, "tape motion statistics:\n"
                              KERN_INFO "repositions       : %3d",
                              ft_history.rewinds);
                }
        }
        ft_failure = 1;
        TRACE_EXIT;
}

static void ftape_init_driver(void)
{
        TRACE_FUN(ft_t_flow);

        ft_drive_type.vendor_id = UNKNOWN_VENDOR;
        ft_drive_type.speed     = 0;
        ft_drive_type.wake_up   = unknown_wake_up;
        ft_drive_type.name      = "Unknown";

        ftape_timeout.seek      = 650 * FT_SECOND;
        ftape_timeout.reset     = 670 * FT_SECOND;
        ftape_timeout.rewind    = 650 * FT_SECOND;
        ftape_timeout.head_seek =  15 * FT_SECOND;
        ftape_timeout.stop      =   5 * FT_SECOND;
        ftape_timeout.pause     =  16 * FT_SECOND;

        ft_qic_std             = -1;
        ftape_tape_len         = 0;  /* unknown */
        ftape_current_command  = 0;
        ftape_current_cylinder = -1;

        ft_segments_per_track       = 102;
        ftape_segments_per_head     = 1020;
        ftape_segments_per_cylinder = 4;
        ft_tracks_per_tape          = 20;

        ft_failure = 1;

        ft_formatted       = 0;
        ft_no_tape         = 1;
        ft_write_protected = 1;
        ft_new_tape        = 1;

        ft_driver_state = idle;

        ft_data_rate = 
                ft_fdc_max_rate   = 500;
        ft_drive_max_rate = 0; /* triggers set_rate_test() */

        ftape_init_drive_needed = 1;

        ft_header_segment_1    = -1;
        ft_header_segment_2    = -1;
        ft_used_header_segment = -1;
        ft_first_data_segment  = -1;
        ft_last_data_segment   = -1;

        ft_location.track = -1;
        ft_location.known = 0;

        ftape_tape_running = 0;
        ftape_might_be_off_track = 1;

        ftape_new_cartridge();  /* init some tape related variables */
        ftape_init_bsm();
        TRACE_EXIT;
}