drivers/clk/Kconfig

   1
   2 config CLKDEV_LOOKUP
   3         bool
   4         select HAVE_CLK
   5
   6 config HAVE_CLK_PREPARE
   7         bool
   8
   9 config COMMON_CLK
  10         bool
  11         select HAVE_CLK_PREPARE
  12         select CLKDEV_LOOKUP
  13         select SRCU
  14         select RATIONAL
  15         ---help---
  16           The common clock framework is a single definition of struct
  17           clk, useful across many platforms, as well as an
  18           implementation of the clock API in include/linux/clk.h.
  19           Architectures utilizing the common struct clk should select
  20           this option.
  21
  22 menu "Common Clock Framework"
  23         depends on COMMON_CLK
  24
  25 config COMMON_CLK_WM831X
  26         tristate "Clock driver for WM831x/2x PMICs"
  27         depends on MFD_WM831X
  28         ---help---
  29           Supports the clocking subsystem of the WM831x/2x series of
  30           PMICs from Wolfson Microelectronics.
  31
  32 source "drivers/clk/versatile/Kconfig"
  33
  34 config CLK_HSDK
  35         bool "PLL Driver for HSDK platform"
  36         depends on OF || COMPILE_TEST
  37         ---help---
  38           This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs
  39           control.
  40
  41 config COMMON_CLK_MAX77686
  42         tristate "Clock driver for Maxim 77620/77686/77802 MFD"
  43         depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
  44         ---help---
  45           This driver supports Maxim 77620/77686/77802 crystal oscillator
  46           clock.
  47
  48 config COMMON_CLK_MAX9485
  49         tristate "Maxim 9485 Programmable Clock Generator"
  50         depends on I2C
  51         help
  52           This driver supports Maxim 9485 Programmable Audio Clock Generator
  53
  54 config COMMON_CLK_RK808
  55         tristate "Clock driver for RK805/RK808/RK818"
  56         depends on MFD_RK808
  57         ---help---
  58           This driver supports RK805, RK808 and RK818 crystal oscillator clock. These
  59           multi-function devices have two fixed-rate oscillators,
  60           clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
  61           by control register.
  62
  63 config COMMON_CLK_HI655X
  64         tristate "Clock driver for Hi655x" if EXPERT
  65         depends on (MFD_HI655X_PMIC || COMPILE_TEST)
  66         depends on REGMAP
  67         default MFD_HI655X_PMIC
  68         ---help---
  69           This driver supports the hi655x PMIC clock. This
  70           multi-function device has one fixed-rate oscillator, clocked
  71           at 32KHz.
  72
  73 config COMMON_CLK_SCMI
  74         tristate "Clock driver controlled via SCMI interface"
  75         depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
  76           ---help---
  77           This driver provides support for clocks that are controlled
  78           by firmware that implements the SCMI interface.
  79
  80           This driver uses SCMI Message Protocol to interact with the
  81           firmware providing all the clock controls.
  82
  83 config COMMON_CLK_SCPI
  84         tristate "Clock driver controlled via SCPI interface"
  85         depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
  86           ---help---
  87           This driver provides support for clocks that are controlled
  88           by firmware that implements the SCPI interface.
  89
  90           This driver uses SCPI Message Protocol to interact with the
  91           firmware providing all the clock controls.
  92
  93 config COMMON_CLK_SI5351
  94         tristate "Clock driver for SiLabs 5351A/B/C"
  95         depends on I2C
  96         select REGMAP_I2C
  97         select RATIONAL
  98         ---help---
  99           This driver supports Silicon Labs 5351A/B/C programmable clock
 100           generators.
 101
 102 config COMMON_CLK_SI514
 103         tristate "Clock driver for SiLabs 514 devices"
 104         depends on I2C
 105         depends on OF
 106         select REGMAP_I2C
 107         help
 108         ---help---
 109           This driver supports the Silicon Labs 514 programmable clock
 110           generator.
 111
 112 config COMMON_CLK_SI544
 113         tristate "Clock driver for SiLabs 544 devices"
 114         depends on I2C
 115         select REGMAP_I2C
 116         help
 117         ---help---
 118           This driver supports the Silicon Labs 544 programmable clock
 119           generator.
 120
 121 config COMMON_CLK_SI570
 122         tristate "Clock driver for SiLabs 570 and compatible devices"
 123         depends on I2C
 124         depends on OF
 125         select REGMAP_I2C
 126         help
 127         ---help---
 128           This driver supports Silicon Labs 570/571/598/599 programmable
 129           clock generators.
 130
 131 config COMMON_CLK_CDCE706
 132         tristate "Clock driver for TI CDCE706 clock synthesizer"
 133         depends on I2C
 134         select REGMAP_I2C
 135         select RATIONAL
 136         ---help---
 137           This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
 138
 139 config COMMON_CLK_CDCE925
 140         tristate "Clock driver for TI CDCE913/925/937/949 devices"
 141         depends on I2C
 142         depends on OF
 143         select REGMAP_I2C
 144         help
 145         ---help---
 146           This driver supports the TI CDCE913/925/937/949 programmable clock
 147           synthesizer. Each chip has different number of PLLs and outputs.
 148           For example, the CDCE925 contains two PLLs with spread-spectrum
 149           clocking support and five output dividers. The driver only supports
 150           the following setup, and uses a fixed setting for the output muxes.
 151           Y1 is derived from the input clock
 152           Y2 and Y3 derive from PLL1
 153           Y4 and Y5 derive from PLL2
 154           Given a target output frequency, the driver will set the PLL and
 155           divider to best approximate the desired output.
 156
 157 config COMMON_CLK_CS2000_CP
 158         tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier"
 159         depends on I2C
 160         help
 161           If you say yes here you get support for the CS2000 clock multiplier.
 162
 163 config COMMON_CLK_GEMINI
 164         bool "Clock driver for Cortina Systems Gemini SoC"
 165         depends on ARCH_GEMINI || COMPILE_TEST
 166         select MFD_SYSCON
 167         select RESET_CONTROLLER
 168         ---help---
 169           This driver supports the SoC clocks on the Cortina Systems Gemini
 170           platform, also known as SL3516 or CS3516.
 171
 172 config COMMON_CLK_ASPEED
 173         bool "Clock driver for Aspeed BMC SoCs"
 174         depends on ARCH_ASPEED || COMPILE_TEST
 175         default ARCH_ASPEED
 176         select MFD_SYSCON
 177         select RESET_CONTROLLER
 178         ---help---
 179           This driver supports the SoC clocks on the Aspeed BMC platforms.
 180
 181           The G4 and G5 series, including the ast2400 and ast2500, are supported
 182           by this driver.
 183
 184 config COMMON_CLK_S2MPS11
 185         tristate "Clock driver for S2MPS1X/S5M8767 MFD"
 186         depends on MFD_SEC_CORE || COMPILE_TEST
 187         ---help---
 188           This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
 189           clock. These multi-function devices have two (S2MPS14) or three
 190           (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
 191
 192 config CLK_TWL6040
 193         tristate "External McPDM functional clock from twl6040"
 194         depends on TWL6040_CORE
 195         ---help---
 196           Enable the external functional clock support on OMAP4+ platforms for
 197           McPDM. McPDM module is using the external bit clock on the McPDM bus
 198           as functional clock.
 199
 200 config COMMON_CLK_AXI_CLKGEN
 201         tristate "AXI clkgen driver"
 202         depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
 203         help
 204         ---help---
 205           Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
 206           FPGAs. It is commonly used in Analog Devices' reference designs.
 207
 208 config CLK_QORIQ
 209         bool "Clock driver for Freescale QorIQ platforms"
 210         depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF
 211         ---help---
 212           This adds the clock driver support for Freescale QorIQ platforms
 213           using common clock framework.
 214
 215 config COMMON_CLK_XGENE
 216         bool "Clock driver for APM XGene SoC"
 217         default y
 218         depends on ARM64 || COMPILE_TEST
 219         ---help---
 220           Sypport for the APM X-Gene SoC reference, PLL, and device clocks.
 221
 222 config COMMON_CLK_NXP
 223         def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
 224         select REGMAP_MMIO if ARCH_LPC32XX
 225         select MFD_SYSCON if ARCH_LPC18XX
 226         ---help---
 227           Support for clock providers on NXP platforms.
 228
 229 config COMMON_CLK_PALMAS
 230         tristate "Clock driver for TI Palmas devices"
 231         depends on MFD_PALMAS
 232         ---help---
 233           This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
 234           using common clock framework.
 235
 236 config COMMON_CLK_PWM
 237         tristate "Clock driver for PWMs used as clock outputs"
 238         depends on PWM
 239         ---help---
 240           Adapter driver so that any PWM output can be (mis)used as clock signal
 241           at 50% duty cycle.
 242
 243 config COMMON_CLK_PXA
 244         def_bool COMMON_CLK && ARCH_PXA
 245         ---help---
 246           Support for the Marvell PXA SoC.
 247
 248 config COMMON_CLK_PIC32
 249         def_bool COMMON_CLK && MACH_PIC32
 250
 251 config COMMON_CLK_OXNAS
 252         bool "Clock driver for the OXNAS SoC Family"
 253         depends on ARCH_OXNAS || COMPILE_TEST
 254         select MFD_SYSCON
 255         ---help---
 256           Support for the OXNAS SoC Family clocks.
 257
 258 config COMMON_CLK_VC5
 259         tristate "Clock driver for IDT VersaClock 5,6 devices"
 260         depends on I2C
 261         depends on OF
 262         select REGMAP_I2C
 263         help
 264         ---help---
 265           This driver supports the IDT VersaClock 5 and VersaClock 6
 266           programmable clock generators.
 267
 268 config COMMON_CLK_STM32MP157
 269         def_bool COMMON_CLK && MACH_STM32MP157
 270         help
 271         ---help---
 272           Support for stm32mp157 SoC family clocks
 273
 274 config COMMON_CLK_STM32F
 275         def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746)
 276         help
 277         ---help---
 278           Support for stm32f4 and stm32f7 SoC families clocks
 279
 280 config COMMON_CLK_STM32H7
 281         def_bool COMMON_CLK && MACH_STM32H743
 282         help
 283         ---help---
 284           Support for stm32h7 SoC family clocks
 285
 286 config COMMON_CLK_BD718XX
 287         tristate "Clock driver for ROHM BD718x7 PMIC"
 288         depends on MFD_ROHM_BD718XX
 289         help
 290           This driver supports ROHM BD71837 and ROHM BD71847
 291           PMICs clock gates.
 292
 293 source "drivers/clk/actions/Kconfig"
 294 source "drivers/clk/bcm/Kconfig"
 295 source "drivers/clk/hisilicon/Kconfig"
 296 source "drivers/clk/imgtec/Kconfig"
 297 source "drivers/clk/imx/Kconfig"
 298 source "drivers/clk/ingenic/Kconfig"
 299 source "drivers/clk/keystone/Kconfig"
 300 source "drivers/clk/mediatek/Kconfig"
 301 source "drivers/clk/meson/Kconfig"
 302 source "drivers/clk/mvebu/Kconfig"
 303 source "drivers/clk/qcom/Kconfig"
 304 source "drivers/clk/renesas/Kconfig"
 305 source "drivers/clk/samsung/Kconfig"
 306 source "drivers/clk/sprd/Kconfig"
 307 source "drivers/clk/sunxi-ng/Kconfig"
 308 source "drivers/clk/tegra/Kconfig"
 309 source "drivers/clk/ti/Kconfig"
 310 source "drivers/clk/uniphier/Kconfig"
 311 source "drivers/clk/zynqmp/Kconfig"
 312
 313 endmenu