clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL dividers.

[mirror_ubuntu-zesty-kernel.git] / drivers / clk / clk-vt8500.c

/*
 * Clock implementation for VIA/Wondermedia SoC's
 * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
 *
 * This software is licensed under the terms of the GNU General Public
 * License version 2, as published by the Free Software Foundation, and
 * may be copied, distributed, and modified under those terms.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>

#define LEGACY_PMC_BASE         0xD8130000

/* All clocks share the same lock as none can be changed concurrently */
static DEFINE_SPINLOCK(_lock);

struct clk_device {
        struct clk_hw   hw;
        void __iomem    *div_reg;
        unsigned int    div_mask;
        void __iomem    *en_reg;
        int             en_bit;
        spinlock_t      *lock;
};

/*
 * Add new PLL_TYPE_x definitions here as required. Use the first known model
 * to support the new type as the name.
 * Add case statements to vtwm_pll_recalc_rate(), vtwm_pll_round_round() and
 * vtwm_pll_set_rate() to handle the new PLL_TYPE_x
 */

#define PLL_TYPE_VT8500         0
#define PLL_TYPE_WM8650         1
#define PLL_TYPE_WM8750         2
#define PLL_TYPE_WM8850         3

struct clk_pll {
        struct clk_hw   hw;
        void __iomem    *reg;
        spinlock_t      *lock;
        int             type;
};

static void __iomem *pmc_base;

static __init void vtwm_set_pmc_base(void)
{
        struct device_node *np =
                of_find_compatible_node(NULL, NULL, "via,vt8500-pmc");

        if (np)
                pmc_base = of_iomap(np, 0);
        else
                pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000);
        of_node_put(np);

        if (!pmc_base)
                pr_err("%s:of_iomap(pmc) failed\n", __func__);
}

#define to_clk_device(_hw) container_of(_hw, struct clk_device, hw)

#define VT8500_PMC_BUSY_MASK            0x18

static void vt8500_pmc_wait_busy(void)
{
        while (readl(pmc_base) & VT8500_PMC_BUSY_MASK)
                cpu_relax();
}

static int vt8500_dclk_enable(struct clk_hw *hw)
{
        struct clk_device *cdev = to_clk_device(hw);
        u32 en_val;
        unsigned long flags = 0;

        spin_lock_irqsave(cdev->lock, flags);

        en_val = readl(cdev->en_reg);
        en_val |= BIT(cdev->en_bit);
        writel(en_val, cdev->en_reg);

        spin_unlock_irqrestore(cdev->lock, flags);
        return 0;
}

static void vt8500_dclk_disable(struct clk_hw *hw)
{
        struct clk_device *cdev = to_clk_device(hw);
        u32 en_val;
        unsigned long flags = 0;

        spin_lock_irqsave(cdev->lock, flags);

        en_val = readl(cdev->en_reg);
        en_val &= ~BIT(cdev->en_bit);
        writel(en_val, cdev->en_reg);

        spin_unlock_irqrestore(cdev->lock, flags);
}

static int vt8500_dclk_is_enabled(struct clk_hw *hw)
{
        struct clk_device *cdev = to_clk_device(hw);
        u32 en_val = (readl(cdev->en_reg) & BIT(cdev->en_bit));

        return en_val ? 1 : 0;
}

static unsigned long vt8500_dclk_recalc_rate(struct clk_hw *hw,
                                unsigned long parent_rate)
{
        struct clk_device *cdev = to_clk_device(hw);
        u32 div = readl(cdev->div_reg) & cdev->div_mask;

        /* Special case for SDMMC devices */
        if ((cdev->div_mask == 0x3F) && (div & BIT(5)))
                div = 64 * (div & 0x1f);

        /* div == 0 is actually the highest divisor */
        if (div == 0)
                div = (cdev->div_mask + 1);

        return parent_rate / div;
}

static long vt8500_dclk_round_rate(struct clk_hw *hw, unsigned long rate,
                                unsigned long *prate)
{
        struct clk_device *cdev = to_clk_device(hw);
        u32 divisor;

        if (rate == 0)
                return 0;

        divisor = *prate / rate;

        /* If prate / rate would be decimal, incr the divisor */
        if (rate * divisor < *prate)
                divisor++;

        /*
         * If this is a request for SDMMC we have to adjust the divisor
         * when >31 to use the fixed predivisor
         */
        if ((cdev->div_mask == 0x3F) && (divisor > 31)) {
                divisor = 64 * ((divisor / 64) + 1);
        }

        return *prate / divisor;
}

static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate,
                                unsigned long parent_rate)
{
        struct clk_device *cdev = to_clk_device(hw);
        u32 divisor;
        unsigned long flags = 0;

        if (rate == 0)
                return 0;

        divisor =  parent_rate / rate;

        if (divisor == cdev->div_mask + 1)
                divisor = 0;

        /* SDMMC mask may need to be corrected before testing if its valid */
        if ((cdev->div_mask == 0x3F) && (divisor > 31)) {
                /*
                 * Bit 5 is a fixed /64 predivisor. If the requested divisor
                 * is >31 then correct for the fixed divisor being required.
                 */
                divisor = 0x20 + (divisor / 64);
        }

        if (divisor > cdev->div_mask) {
                pr_err("%s: invalid divisor for clock\n", __func__);
                return -EINVAL;
        }

        spin_lock_irqsave(cdev->lock, flags);

        vt8500_pmc_wait_busy();
        writel(divisor, cdev->div_reg);
        vt8500_pmc_wait_busy();

        spin_unlock_irqrestore(cdev->lock, flags);

        return 0;
}


static const struct clk_ops vt8500_gated_clk_ops = {
        .enable = vt8500_dclk_enable,
        .disable = vt8500_dclk_disable,
        .is_enabled = vt8500_dclk_is_enabled,
};

static const struct clk_ops vt8500_divisor_clk_ops = {
        .round_rate = vt8500_dclk_round_rate,
        .set_rate = vt8500_dclk_set_rate,
        .recalc_rate = vt8500_dclk_recalc_rate,
};

static const struct clk_ops vt8500_gated_divisor_clk_ops = {
        .enable = vt8500_dclk_enable,
        .disable = vt8500_dclk_disable,
        .is_enabled = vt8500_dclk_is_enabled,
        .round_rate = vt8500_dclk_round_rate,
        .set_rate = vt8500_dclk_set_rate,
        .recalc_rate = vt8500_dclk_recalc_rate,
};

#define CLK_INIT_GATED                  BIT(0)
#define CLK_INIT_DIVISOR                BIT(1)
#define CLK_INIT_GATED_DIVISOR          (CLK_INIT_DIVISOR | CLK_INIT_GATED)

static __init void vtwm_device_clk_init(struct device_node *node)
{
        u32 en_reg, div_reg;
        struct clk_hw *hw;
        struct clk_device *dev_clk;
        const char *clk_name = node->name;
        const char *parent_name;
        struct clk_init_data init;
        int rc;
        int clk_init_flags = 0;

        if (!pmc_base)
                vtwm_set_pmc_base();

        dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL);
        if (WARN_ON(!dev_clk))
                return;

        dev_clk->lock = &_lock;

        rc = of_property_read_u32(node, "enable-reg", &en_reg);
        if (!rc) {
                dev_clk->en_reg = pmc_base + en_reg;
                rc = of_property_read_u32(node, "enable-bit", &dev_clk->en_bit);
                if (rc) {
                        pr_err("%s: enable-bit property required for gated clock\n",
                                                                __func__);
                        return;
                }
                clk_init_flags |= CLK_INIT_GATED;
        }

        rc = of_property_read_u32(node, "divisor-reg", &div_reg);
        if (!rc) {
                dev_clk->div_reg = pmc_base + div_reg;
                /*
                 * use 0x1f as the default mask since it covers
                 * almost all the clocks and reduces dts properties
                 */
                dev_clk->div_mask = 0x1f;

                of_property_read_u32(node, "divisor-mask", &dev_clk->div_mask);
                clk_init_flags |= CLK_INIT_DIVISOR;
        }

        of_property_read_string(node, "clock-output-names", &clk_name);

        switch (clk_init_flags) {
        case CLK_INIT_GATED:
                init.ops = &vt8500_gated_clk_ops;
                break;
        case CLK_INIT_DIVISOR:
                init.ops = &vt8500_divisor_clk_ops;
                break;
        case CLK_INIT_GATED_DIVISOR:
                init.ops = &vt8500_gated_divisor_clk_ops;
                break;
        default:
                pr_err("%s: Invalid clock description in device tree\n",
                                                                __func__);
                kfree(dev_clk);
                return;
        }

        init.name = clk_name;
        init.flags = 0;
        parent_name = of_clk_get_parent_name(node, 0);
        init.parent_names = &parent_name;
        init.num_parents = 1;

        dev_clk->hw.init = &init;

        hw = &dev_clk->hw;
        rc = clk_hw_register(NULL, hw);
        if (WARN_ON(rc)) {
                kfree(dev_clk);
                return;
        }
        rc = of_clk_add_hw_provider(node, of_clk_hw_simple_get, hw);
        clk_hw_register_clkdev(hw, clk_name, NULL);
}
CLK_OF_DECLARE(vt8500_device, "via,vt8500-device-clock", vtwm_device_clk_init);

/* PLL clock related functions */

#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)

/* Helper macros for PLL_VT8500 */
#define VT8500_PLL_MUL(x)       ((x & 0x1F) << 1)
#define VT8500_PLL_DIV(x)       ((x & 0x100) ? 1 : 2)

#define VT8500_BITS_TO_FREQ(r, m, d)                                    \
                                ((r / d) * m)

#define VT8500_BITS_TO_VAL(m, d)                                        \
                                ((d == 2 ? 0 : 0x100) | ((m >> 1) & 0x1F))

/* Helper macros for PLL_WM8650 */
#define WM8650_PLL_MUL(x)       (x & 0x3FF)
#define WM8650_PLL_DIV(x)       (((x >> 10) & 7) * (1 << ((x >> 13) & 3)))

#define WM8650_BITS_TO_FREQ(r, m, d1, d2)                               \
                                (r * m / (d1 * (1 << d2)))

#define WM8650_BITS_TO_VAL(m, d1, d2)                                   \
                                ((d2 << 13) | (d1 << 10) | (m & 0x3FF))

/* Helper macros for PLL_WM8750 */
#define WM8750_PLL_MUL(x)       (((x >> 16) & 0xFF) + 1)
#define WM8750_PLL_DIV(x)       ((((x >> 8) & 1) + 1) * (1 << (x & 7)))

#define WM8750_BITS_TO_FREQ(r, m, d1, d2)                               \
                                (r * (m+1) / ((d1+1) * (1 << d2)))

#define WM8750_BITS_TO_VAL(f, m, d1, d2)                                \
                ((f << 24) | ((m - 1) << 16) | ((d1 - 1) << 8) | d2)

/* Helper macros for PLL_WM8850 */
#define WM8850_PLL_MUL(x)       ((((x >> 16) & 0x7F) + 1) * 2)
#define WM8850_PLL_DIV(x)       ((((x >> 8) & 1) + 1) * (1 << (x & 3)))

#define WM8850_BITS_TO_FREQ(r, m, d1, d2)                               \
                                (r * ((m + 1) * 2) / ((d1+1) * (1 << d2)))

#define WM8850_BITS_TO_VAL(m, d1, d2)                                   \
                ((((m / 2) - 1) << 16) | ((d1 - 1) << 8) | d2)

static int vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate,
                                u32 *multiplier, u32 *prediv)
{
        unsigned long tclk;

        /* sanity check */
        if ((rate < parent_rate * 4) || (rate > parent_rate * 62)) {
                pr_err("%s: requested rate out of range\n", __func__);
                *multiplier = 0;
                *prediv = 1;
                return -EINVAL;
        }
        if (rate <= parent_rate * 31)
                /* use the prediv to double the resolution */
                *prediv = 2;
        else
                *prediv = 1;

        *multiplier = rate / (parent_rate / *prediv);
        tclk = (parent_rate / *prediv) * *multiplier;

        if (tclk != rate)
                pr_warn("%s: requested rate %lu, found rate %lu\n", __func__,
                                                                rate, tclk);

        return 0;
}

/*
 * M * parent [O1] => / P [O2] => / D [O3]
 * Where O1 is 900MHz...3GHz;
 * O2 is 600MHz >= (M * parent) / P >= 300MHz;
 * M is 36...120 [25MHz parent]; D is 1 or 2 or 4 or 8.
 * Possible ranges (O3):
 * D = 8: 37,5MHz...75MHz
 * D = 4: 75MHz...150MHz
 * D = 2: 150MHz...300MHz
 * D = 1: 300MHz...600MHz
 */
static int wm8650_find_pll_bits(unsigned long rate,
        unsigned long parent_rate, u32 *multiplier, u32 *divisor1,
        u32 *divisor2)
{
        unsigned long O1, min_err, rate_err;

        if (!parent_rate || (rate < 37500000) || (rate > 600000000))
                return -EINVAL;

        *divisor2 = rate <= 75000000 ? 3 : rate <= 150000000 ? 2 :
                                           rate <= 300000000 ? 1 : 0;
        /*
         * Divisor P cannot be calculated. Test all divisors and find where M
         * will be as close as possible to the requested rate.
         */
        min_err = ULONG_MAX;
        for (*divisor1 = 5; *divisor1 >= 3; (*divisor1)--) {
                O1 = rate * *divisor1 * (1 << (*divisor2));
                rate_err = O1 % parent_rate;
                if (rate_err < min_err) {
                        *multiplier = O1 / parent_rate;
                        if (rate_err == 0)
                                return 0;

                        min_err = rate_err;
                }
        }

        if ((*multiplier < 3) || (*multiplier > 1023))
                return -EINVAL;

        pr_warn("%s: rate error is %lu\n", __func__, min_err);

        return 0;
}

static u32 wm8750_get_filter(u32 parent_rate, u32 divisor1)
{
        /* calculate frequency (MHz) after pre-divisor */
        u32 freq = (parent_rate / 1000000) / (divisor1 + 1);

        if ((freq < 10) || (freq > 200))
                pr_warn("%s: PLL recommended input frequency 10..200Mhz (requested %d Mhz)\n",
                                __func__, freq);

        if (freq >= 166)
                return 7;
        else if (freq >= 104)
                return 6;
        else if (freq >= 65)
                return 5;
        else if (freq >= 42)
                return 4;
        else if (freq >= 26)
                return 3;
        else if (freq >= 16)
                return 2;
        else if (freq >= 10)
                return 1;

        return 0;
}

static int wm8750_find_pll_bits(unsigned long rate, unsigned long parent_rate,
                                u32 *filter, u32 *multiplier, u32 *divisor1, u32 *divisor2)
{
        u32 mul;
        int div1, div2;
        unsigned long tclk, rate_err, best_err;

        best_err = (unsigned long)-1;

        /* Find the closest match (lower or equal to requested) */
        for (div1 = 1; div1 >= 0; div1--)
                for (div2 = 7; div2 >= 0; div2--)
                        for (mul = 0; mul <= 255; mul++) {
                                tclk = parent_rate * (mul + 1) / ((div1 + 1) * (1 << div2));
                                if (tclk > rate)
                                        continue;
                                /* error will always be +ve */
                                rate_err = rate - tclk;
                                if (rate_err == 0) {
                                        *filter = wm8750_get_filter(parent_rate, div1);
                                        *multiplier = mul;
                                        *divisor1 = div1;
                                        *divisor2 = div2;
                                        return 0;
                                }

                                if (rate_err < best_err) {
                                        best_err = rate_err;
                                        *multiplier = mul;
                                        *divisor1 = div1;
                                        *divisor2 = div2;
                                }
                        }

        if (best_err == (unsigned long)-1) {
                pr_warn("%s: impossible rate %lu\n", __func__, rate);
                return -EINVAL;
        }

        /* if we got here, it wasn't an exact match */
        pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
                                                        rate - best_err);

        *filter = wm8750_get_filter(parent_rate, *divisor1);

        return 0;
}

static int wm8850_find_pll_bits(unsigned long rate, unsigned long parent_rate,
                                u32 *multiplier, u32 *divisor1, u32 *divisor2)
{
        u32 mul;
        int div1, div2;
        unsigned long tclk, rate_err, best_err;

        best_err = (unsigned long)-1;

        /* Find the closest match (lower or equal to requested) */
        for (div1 = 1; div1 >= 0; div1--)
                for (div2 = 3; div2 >= 0; div2--)
                        for (mul = 0; mul <= 127; mul++) {
                                tclk = parent_rate * ((mul + 1) * 2) /
                                                ((div1 + 1) * (1 << div2));
                                if (tclk > rate)
                                        continue;
                                /* error will always be +ve */
                                rate_err = rate - tclk;
                                if (rate_err == 0) {
                                        *multiplier = mul;
                                        *divisor1 = div1;
                                        *divisor2 = div2;
                                        return 0;
                                }

                                if (rate_err < best_err) {
                                        best_err = rate_err;
                                        *multiplier = mul;
                                        *divisor1 = div1;
                                        *divisor2 = div2;
                                }
                        }

        if (best_err == (unsigned long)-1) {
                pr_warn("%s: impossible rate %lu\n", __func__, rate);
                return -EINVAL;
        }

        /* if we got here, it wasn't an exact match */
        pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
                                                        rate - best_err);

        return 0;
}

static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
                                unsigned long parent_rate)
{
        struct clk_pll *pll = to_clk_pll(hw);
        u32 filter, mul, div1, div2;
        u32 pll_val;
        unsigned long flags = 0;
        int ret;

        /* sanity check */

        switch (pll->type) {
        case PLL_TYPE_VT8500:
                ret = vt8500_find_pll_bits(rate, parent_rate, &mul, &div1);
                if (!ret)
                        pll_val = VT8500_BITS_TO_VAL(mul, div1);
                break;
        case PLL_TYPE_WM8650:
                ret = wm8650_find_pll_bits(rate, parent_rate, &mul, &div1, &div2);
                if (!ret)
                        pll_val = WM8650_BITS_TO_VAL(mul, div1, div2);
                break;
        case PLL_TYPE_WM8750:
                ret = wm8750_find_pll_bits(rate, parent_rate, &filter, &mul, &div1, &div2);
                if (!ret)
                        pll_val = WM8750_BITS_TO_VAL(filter, mul, div1, div2);
                break;
        case PLL_TYPE_WM8850:
                ret = wm8850_find_pll_bits(rate, parent_rate, &mul, &div1, &div2);
                if (!ret)
                        pll_val = WM8850_BITS_TO_VAL(mul, div1, div2);
                break;
        default:
                pr_err("%s: invalid pll type\n", __func__);
                ret = -EINVAL;
        }

        if (ret)
                return ret;

        spin_lock_irqsave(pll->lock, flags);

        vt8500_pmc_wait_busy();
        writel(pll_val, pll->reg);
        vt8500_pmc_wait_busy();

        spin_unlock_irqrestore(pll->lock, flags);

        return 0;
}

static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate,
                                unsigned long *prate)
{
        struct clk_pll *pll = to_clk_pll(hw);
        u32 filter, mul, div1, div2;
        long round_rate;
        int ret;

        switch (pll->type) {
        case PLL_TYPE_VT8500:
                ret = vt8500_find_pll_bits(rate, *prate, &mul, &div1);
                if (!ret)
                        round_rate = VT8500_BITS_TO_FREQ(*prate, mul, div1);
                break;
        case PLL_TYPE_WM8650:
                ret = wm8650_find_pll_bits(rate, *prate, &mul, &div1, &div2);
                if (!ret)
                        round_rate = WM8650_BITS_TO_FREQ(*prate, mul, div1, div2);
                break;
        case PLL_TYPE_WM8750:
                ret = wm8750_find_pll_bits(rate, *prate, &filter, &mul, &div1, &div2);
                if (!ret)
                        round_rate = WM8750_BITS_TO_FREQ(*prate, mul, div1, div2);
                break;
        case PLL_TYPE_WM8850:
                ret = wm8850_find_pll_bits(rate, *prate, &mul, &div1, &div2);
                if (!ret)
                        round_rate = WM8850_BITS_TO_FREQ(*prate, mul, div1, div2);
                break;
        default:
                ret = -EINVAL;
        }

        if (ret)
                return ret;

        return round_rate;
}

static unsigned long vtwm_pll_recalc_rate(struct clk_hw *hw,
                                unsigned long parent_rate)
{
        struct clk_pll *pll = to_clk_pll(hw);
        u32 pll_val = readl(pll->reg);
        unsigned long pll_freq;

        switch (pll->type) {
        case PLL_TYPE_VT8500:
                pll_freq = parent_rate * VT8500_PLL_MUL(pll_val);
                pll_freq /= VT8500_PLL_DIV(pll_val);
                break;
        case PLL_TYPE_WM8650:
                pll_freq = parent_rate * WM8650_PLL_MUL(pll_val);
                pll_freq /= WM8650_PLL_DIV(pll_val);
                break;
        case PLL_TYPE_WM8750:
                pll_freq = parent_rate * WM8750_PLL_MUL(pll_val);
                pll_freq /= WM8750_PLL_DIV(pll_val);
                break;
        case PLL_TYPE_WM8850:
                pll_freq = parent_rate * WM8850_PLL_MUL(pll_val);
                pll_freq /= WM8850_PLL_DIV(pll_val);
                break;
        default:
                pll_freq = 0;
        }

        return pll_freq;
}

static const struct clk_ops vtwm_pll_ops = {
        .round_rate = vtwm_pll_round_rate,
        .set_rate = vtwm_pll_set_rate,
        .recalc_rate = vtwm_pll_recalc_rate,
};

static __init void vtwm_pll_clk_init(struct device_node *node, int pll_type)
{
        u32 reg;
        struct clk_hw *hw;
        struct clk_pll *pll_clk;
        const char *clk_name = node->name;
        const char *parent_name;
        struct clk_init_data init;
        int rc;

        if (!pmc_base)
                vtwm_set_pmc_base();

        rc = of_property_read_u32(node, "reg", &reg);
        if (WARN_ON(rc))
                return;

        pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
        if (WARN_ON(!pll_clk))
                return;

        pll_clk->reg = pmc_base + reg;
        pll_clk->lock = &_lock;
        pll_clk->type = pll_type;

        of_property_read_string(node, "clock-output-names", &clk_name);

        init.name = clk_name;
        init.ops = &vtwm_pll_ops;
        init.flags = 0;
        parent_name = of_clk_get_parent_name(node, 0);
        init.parent_names = &parent_name;
        init.num_parents = 1;

        pll_clk->hw.init = &init;

        hw = &pll_clk->hw;
        rc = clk_hw_register(NULL, &pll_clk->hw);
        if (WARN_ON(rc)) {
                kfree(pll_clk);
                return;
        }
        rc = of_clk_add_hw_provider(node, of_clk_hw_simple_get, hw);
        clk_hw_register_clkdev(hw, clk_name, NULL);
}


/* Wrappers for initialization functions */

static void __init vt8500_pll_init(struct device_node *node)
{
        vtwm_pll_clk_init(node, PLL_TYPE_VT8500);
}
CLK_OF_DECLARE(vt8500_pll, "via,vt8500-pll-clock", vt8500_pll_init);

static void __init wm8650_pll_init(struct device_node *node)
{
        vtwm_pll_clk_init(node, PLL_TYPE_WM8650);
}
CLK_OF_DECLARE(wm8650_pll, "wm,wm8650-pll-clock", wm8650_pll_init);

static void __init wm8750_pll_init(struct device_node *node)
{
        vtwm_pll_clk_init(node, PLL_TYPE_WM8750);
}
CLK_OF_DECLARE(wm8750_pll, "wm,wm8750-pll-clock", wm8750_pll_init);

static void __init wm8850_pll_init(struct device_node *node)
{
        vtwm_pll_clk_init(node, PLL_TYPE_WM8850);
}
CLK_OF_DECLARE(wm8850_pll, "wm,wm8850-pll-clock", wm8850_pll_init);