drivers/crypto/Kconfig

   1
   2 menuconfig CRYPTO_HW
   3         bool "Hardware crypto devices"
   4         default y
   5         ---help---
   6           Say Y here to get to see options for hardware crypto devices and
   7           processors. This option alone does not add any kernel code.
   8
   9           If you say N, all options in this submenu will be skipped and disabled.
  10
  11 if CRYPTO_HW
  12
  13 config CRYPTO_DEV_PADLOCK
  14         tristate "Support for VIA PadLock ACE"
  15         depends on X86 && !UML
  16         help
  17           Some VIA processors come with an integrated crypto engine
  18           (so called VIA PadLock ACE, Advanced Cryptography Engine)
  19           that provides instructions for very fast cryptographic
  20           operations with supported algorithms.
  21
  22           The instructions are used only when the CPU supports them.
  23           Otherwise software encryption is used.
  24
  25 config CRYPTO_DEV_PADLOCK_AES
  26         tristate "PadLock driver for AES algorithm"
  27         depends on CRYPTO_DEV_PADLOCK
  28         select CRYPTO_BLKCIPHER
  29         select CRYPTO_AES
  30         help
  31           Use VIA PadLock for AES algorithm.
  32
  33           Available in VIA C3 and newer CPUs.
  34
  35           If unsure say M. The compiled module will be
  36           called padlock-aes.
  37
  38 config CRYPTO_DEV_PADLOCK_SHA
  39         tristate "PadLock driver for SHA1 and SHA256 algorithms"
  40         depends on CRYPTO_DEV_PADLOCK
  41         select CRYPTO_HASH
  42         select CRYPTO_SHA1
  43         select CRYPTO_SHA256
  44         help
  45           Use VIA PadLock for SHA1/SHA256 algorithms.
  46
  47           Available in VIA C7 and newer processors.
  48
  49           If unsure say M. The compiled module will be
  50           called padlock-sha.
  51
  52 config CRYPTO_DEV_GEODE
  53         tristate "Support for the Geode LX AES engine"
  54         depends on X86_32 && PCI
  55         select CRYPTO_ALGAPI
  56         select CRYPTO_BLKCIPHER
  57         help
  58           Say 'Y' here to use the AMD Geode LX processor on-board AES
  59           engine for the CryptoAPI AES algorithm.
  60
  61           To compile this driver as a module, choose M here: the module
  62           will be called geode-aes.
  63
  64 config ZCRYPT
  65         tristate "Support for PCI-attached cryptographic adapters"
  66         depends on S390
  67         select ZCRYPT_MONOLITHIC if ZCRYPT="y"
  68         select HW_RANDOM
  69         help
  70           Select this option if you want to use a PCI-attached cryptographic
  71           adapter like:
  72           + PCI Cryptographic Accelerator (PCICA)
  73           + PCI Cryptographic Coprocessor (PCICC)
  74           + PCI-X Cryptographic Coprocessor (PCIXCC)
  75           + Crypto Express2 Coprocessor (CEX2C)
  76           + Crypto Express2 Accelerator (CEX2A)
  77
  78 config ZCRYPT_MONOLITHIC
  79         bool "Monolithic zcrypt module"
  80         depends on ZCRYPT="m"
  81         help
  82           Select this option if you want to have a single module z90crypt,
  83           that contains all parts of the crypto device driver (ap bus,
  84           request router and all the card drivers).
  85
  86 config CRYPTO_SHA1_S390
  87         tristate "SHA1 digest algorithm"
  88         depends on S390
  89         select CRYPTO_HASH
  90         help
  91           This is the s390 hardware accelerated implementation of the
  92           SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
  93
  94 config CRYPTO_SHA256_S390
  95         tristate "SHA256 digest algorithm"
  96         depends on S390
  97         select CRYPTO_HASH
  98         help
  99           This is the s390 hardware accelerated implementation of the
 100           SHA256 secure hash standard (DFIPS 180-2).
 101
 102           This version of SHA implements a 256 bit hash with 128 bits of
 103           security against collision attacks.
 104
 105 config CRYPTO_SHA512_S390
 106         tristate "SHA384 and SHA512 digest algorithm"
 107         depends on S390
 108         select CRYPTO_HASH
 109         help
 110           This is the s390 hardware accelerated implementation of the
 111           SHA512 secure hash standard.
 112
 113           This version of SHA implements a 512 bit hash with 256 bits of
 114           security against collision attacks. The code also includes SHA-384,
 115           a 384 bit hash with 192 bits of security against collision attacks.
 116
 117
 118 config CRYPTO_DES_S390
 119         tristate "DES and Triple DES cipher algorithms"
 120         depends on S390
 121         select CRYPTO_ALGAPI
 122         select CRYPTO_BLKCIPHER
 123         help
 124           This us the s390 hardware accelerated implementation of the
 125           DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
 126
 127 config CRYPTO_AES_S390
 128         tristate "AES cipher algorithms"
 129         depends on S390
 130         select CRYPTO_ALGAPI
 131         select CRYPTO_BLKCIPHER
 132         help
 133           This is the s390 hardware accelerated implementation of the
 134           AES cipher algorithms (FIPS-197). AES uses the Rijndael
 135           algorithm.
 136
 137           Rijndael appears to be consistently a very good performer in
 138           both hardware and software across a wide range of computing
 139           environments regardless of its use in feedback or non-feedback
 140           modes. Its key setup time is excellent, and its key agility is
 141           good. Rijndael's very low memory requirements make it very well
 142           suited for restricted-space environments, in which it also
 143           demonstrates excellent performance. Rijndael's operations are
 144           among the easiest to defend against power and timing attacks.
 145
 146           On s390 the System z9-109 currently only supports the key size
 147           of 128 bit.
 148
 149 config S390_PRNG
 150         tristate "Pseudo random number generator device driver"
 151         depends on S390
 152         default "m"
 153         help
 154           Select this option if you want to use the s390 pseudo random number
 155           generator. The PRNG is part of the cryptographic processor functions
 156           and uses triple-DES to generate secure random numbers like the
 157           ANSI X9.17 standard. The PRNG is usable via the char device
 158           /dev/prandom.
 159
 160 config CRYPTO_DEV_MV_CESA
 161         tristate "Marvell's Cryptographic Engine"
 162         depends on PLAT_ORION
 163         select CRYPTO_ALGAPI
 164         select CRYPTO_AES
 165         select CRYPTO_BLKCIPHER2
 166         help
 167           This driver allows you to utilize the Cryptographic Engines and
 168           Security Accelerator (CESA) which can be found on the Marvell Orion
 169           and Kirkwood SoCs, such as QNAP's TS-209.
 170
 171           Currently the driver supports AES in ECB and CBC mode without DMA.
 172
 173 config CRYPTO_DEV_HIFN_795X
 174         tristate "Driver HIFN 795x crypto accelerator chips"
 175         select CRYPTO_DES
 176         select CRYPTO_ALGAPI
 177         select CRYPTO_BLKCIPHER
 178         select HW_RANDOM if CRYPTO_DEV_HIFN_795X_RNG
 179         depends on PCI
 180         help
 181           This option allows you to have support for HIFN 795x crypto adapters.
 182
 183 config CRYPTO_DEV_HIFN_795X_RNG
 184         bool "HIFN 795x random number generator"
 185         depends on CRYPTO_DEV_HIFN_795X
 186         help
 187           Select this option if you want to enable the random number generator
 188           on the HIFN 795x crypto adapters.
 189
 190 config CRYPTO_DEV_TALITOS
 191         tristate "Talitos Freescale Security Engine (SEC)"
 192         select CRYPTO_ALGAPI
 193         select CRYPTO_AUTHENC
 194         select HW_RANDOM
 195         depends on FSL_SOC
 196         help
 197           Say 'Y' here to use the Freescale Security Engine (SEC)
 198           to offload cryptographic algorithm computation.
 199
 200           The Freescale SEC is present on PowerQUICC 'E' processors, such
 201           as the MPC8349E and MPC8548E.
 202
 203           To compile this driver as a module, choose M here: the module
 204           will be called talitos.
 205
 206 config CRYPTO_DEV_IXP4XX
 207         tristate "Driver for IXP4xx crypto hardware acceleration"
 208         depends on ARCH_IXP4XX
 209         select CRYPTO_DES
 210         select CRYPTO_ALGAPI
 211         select CRYPTO_AUTHENC
 212         select CRYPTO_BLKCIPHER
 213         help
 214           Driver for the IXP4xx NPE crypto engine.
 215
 216 config CRYPTO_DEV_PPC4XX
 217         tristate "Driver AMCC PPC4xx crypto accelerator"
 218         depends on PPC && 4xx
 219         select CRYPTO_HASH
 220         select CRYPTO_ALGAPI
 221         select CRYPTO_BLKCIPHER
 222         help
 223           This option allows you to have support for AMCC crypto acceleration.
 224
 225 endif # CRYPTO_HW