drivers/extcon/extcon-fsa9480.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * extcon-fsa9480.c - Fairchild Semiconductor FSA9480 extcon driver
   4  *
   5  * Copyright (c) 2019 Tomasz Figa <tomasz.figa@gmail.com>
   6  *
   7  * Loosely based on old fsa9480 misc-device driver.
   8  */
   9
  10 #include <linux/kernel.h>
  11 #include <linux/module.h>
  12 #include <linux/types.h>
  13 #include <linux/i2c.h>
  14 #include <linux/slab.h>
  15 #include <linux/bitops.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/err.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/kobject.h>
  20 #include <linux/extcon-provider.h>
  21 #include <linux/irqdomain.h>
  22 #include <linux/regmap.h>
  23
  24 /* FSA9480 I2C registers */
  25 #define FSA9480_REG_DEVID               0x01
  26 #define FSA9480_REG_CTRL                0x02
  27 #define FSA9480_REG_INT1                0x03
  28 #define FSA9480_REG_INT2                0x04
  29 #define FSA9480_REG_INT1_MASK           0x05
  30 #define FSA9480_REG_INT2_MASK           0x06
  31 #define FSA9480_REG_ADC                 0x07
  32 #define FSA9480_REG_TIMING1             0x08
  33 #define FSA9480_REG_TIMING2             0x09
  34 #define FSA9480_REG_DEV_T1              0x0a
  35 #define FSA9480_REG_DEV_T2              0x0b
  36 #define FSA9480_REG_BTN1                0x0c
  37 #define FSA9480_REG_BTN2                0x0d
  38 #define FSA9480_REG_CK                  0x0e
  39 #define FSA9480_REG_CK_INT1             0x0f
  40 #define FSA9480_REG_CK_INT2             0x10
  41 #define FSA9480_REG_CK_INTMASK1         0x11
  42 #define FSA9480_REG_CK_INTMASK2         0x12
  43 #define FSA9480_REG_MANSW1              0x13
  44 #define FSA9480_REG_MANSW2              0x14
  45 #define FSA9480_REG_END                 0x15
  46
  47 /* Control */
  48 #define CON_SWITCH_OPEN         (1 << 4)
  49 #define CON_RAW_DATA            (1 << 3)
  50 #define CON_MANUAL_SW           (1 << 2)
  51 #define CON_WAIT                (1 << 1)
  52 #define CON_INT_MASK            (1 << 0)
  53 #define CON_MASK                (CON_SWITCH_OPEN | CON_RAW_DATA | \
  54                                  CON_MANUAL_SW | CON_WAIT)
  55
  56 /* Device Type 1 */
  57 #define DEV_USB_OTG             7
  58 #define DEV_DEDICATED_CHG       6
  59 #define DEV_USB_CHG             5
  60 #define DEV_CAR_KIT             4
  61 #define DEV_UART                3
  62 #define DEV_USB                 2
  63 #define DEV_AUDIO_2             1
  64 #define DEV_AUDIO_1             0
  65
  66 #define DEV_T1_USB_MASK         (DEV_USB_OTG | DEV_USB)
  67 #define DEV_T1_UART_MASK        (DEV_UART)
  68 #define DEV_T1_CHARGER_MASK     (DEV_DEDICATED_CHG | DEV_USB_CHG)
  69
  70 /* Device Type 2 */
  71 #define DEV_AV                  14
  72 #define DEV_TTY                 13
  73 #define DEV_PPD                 12
  74 #define DEV_JIG_UART_OFF        11
  75 #define DEV_JIG_UART_ON         10
  76 #define DEV_JIG_USB_OFF         9
  77 #define DEV_JIG_USB_ON          8
  78
  79 #define DEV_T2_USB_MASK         (DEV_JIG_USB_OFF | DEV_JIG_USB_ON)
  80 #define DEV_T2_UART_MASK        (DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
  81 #define DEV_T2_JIG_MASK         (DEV_JIG_USB_OFF | DEV_JIG_USB_ON | \
  82                                  DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
  83
  84 /*
  85  * Manual Switch
  86  * D- [7:5] / D+ [4:2]
  87  * 000: Open all / 001: USB / 010: AUDIO / 011: UART / 100: V_AUDIO
  88  */
  89 #define SW_VAUDIO               ((4 << 5) | (4 << 2))
  90 #define SW_UART                 ((3 << 5) | (3 << 2))
  91 #define SW_AUDIO                ((2 << 5) | (2 << 2))
  92 #define SW_DHOST                ((1 << 5) | (1 << 2))
  93 #define SW_AUTO                 ((0 << 5) | (0 << 2))
  94
  95 /* Interrupt 1 */
  96 #define INT1_MASK               (0xff << 0)
  97 #define INT_DETACH              (1 << 1)
  98 #define INT_ATTACH              (1 << 0)
  99
 100 /* Interrupt 2 mask */
 101 #define INT2_MASK               (0x1f << 0)
 102
 103 /* Timing Set 1 */
 104 #define TIMING1_ADC_500MS       (0x6 << 0)
 105
 106 struct fsa9480_usbsw {
 107         struct device *dev;
 108         struct regmap *regmap;
 109         struct extcon_dev *edev;
 110         u16 cable;
 111 };
 112
 113 static const unsigned int fsa9480_extcon_cable[] = {
 114         EXTCON_USB_HOST,
 115         EXTCON_USB,
 116         EXTCON_CHG_USB_DCP,
 117         EXTCON_CHG_USB_SDP,
 118         EXTCON_CHG_USB_ACA,
 119         EXTCON_JACK_LINE_OUT,
 120         EXTCON_JACK_VIDEO_OUT,
 121         EXTCON_JIG,
 122
 123         EXTCON_NONE,
 124 };
 125
 126 static const u64 cable_types[] = {
 127         [DEV_USB_OTG] = BIT_ULL(EXTCON_USB_HOST),
 128         [DEV_DEDICATED_CHG] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_DCP),
 129         [DEV_USB_CHG] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP),
 130         [DEV_CAR_KIT] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP)
 131                         | BIT_ULL(EXTCON_JACK_LINE_OUT),
 132         [DEV_UART] = BIT_ULL(EXTCON_JIG),
 133         [DEV_USB] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP),
 134         [DEV_AUDIO_2] = BIT_ULL(EXTCON_JACK_LINE_OUT),
 135         [DEV_AUDIO_1] = BIT_ULL(EXTCON_JACK_LINE_OUT),
 136         [DEV_AV] = BIT_ULL(EXTCON_JACK_LINE_OUT)
 137                    | BIT_ULL(EXTCON_JACK_VIDEO_OUT),
 138         [DEV_TTY] = BIT_ULL(EXTCON_JIG),
 139         [DEV_PPD] = BIT_ULL(EXTCON_JACK_LINE_OUT) | BIT_ULL(EXTCON_CHG_USB_ACA),
 140         [DEV_JIG_UART_OFF] = BIT_ULL(EXTCON_JIG),
 141         [DEV_JIG_UART_ON] = BIT_ULL(EXTCON_JIG),
 142         [DEV_JIG_USB_OFF] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_JIG),
 143         [DEV_JIG_USB_ON] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_JIG),
 144 };
 145
 146 /* Define regmap configuration of FSA9480 for I2C communication  */
 147 static bool fsa9480_volatile_reg(struct device *dev, unsigned int reg)
 148 {
 149         switch (reg) {
 150         case FSA9480_REG_INT1_MASK:
 151                 return true;
 152         default:
 153                 break;
 154         }
 155         return false;
 156 }
 157
 158 static const struct regmap_config fsa9480_regmap_config = {
 159         .reg_bits       = 8,
 160         .val_bits       = 8,
 161         .volatile_reg   = fsa9480_volatile_reg,
 162         .max_register   = FSA9480_REG_END,
 163 };
 164
 165 static int fsa9480_write_reg(struct fsa9480_usbsw *usbsw, int reg, int value)
 166 {
 167         int ret;
 168
 169         ret = regmap_write(usbsw->regmap, reg, value);
 170         if (ret < 0)
 171                 dev_err(usbsw->dev, "%s: err %d\n", __func__, ret);
 172
 173         return ret;
 174 }
 175
 176 static int fsa9480_read_reg(struct fsa9480_usbsw *usbsw, int reg)
 177 {
 178         int ret, val;
 179
 180         ret = regmap_read(usbsw->regmap, reg, &val);
 181         if (ret < 0) {
 182                 dev_err(usbsw->dev, "%s: err %d\n", __func__, ret);
 183                 return ret;
 184         }
 185
 186         return val;
 187 }
 188
 189 static int fsa9480_read_irq(struct fsa9480_usbsw *usbsw, int *value)
 190 {
 191         u8 regs[2];
 192         int ret;
 193
 194         ret = regmap_bulk_read(usbsw->regmap, FSA9480_REG_INT1, regs, 2);
 195         if (ret < 0)
 196                 dev_err(usbsw->dev, "%s: err %d\n", __func__, ret);
 197
 198         *value = regs[1] << 8 | regs[0];
 199         return ret;
 200 }
 201
 202 static void fsa9480_handle_change(struct fsa9480_usbsw *usbsw,
 203                                   u16 mask, bool attached)
 204 {
 205         while (mask) {
 206                 int dev = fls64(mask) - 1;
 207                 u64 cables = cable_types[dev];
 208
 209                 while (cables) {
 210                         int cable = fls64(cables) - 1;
 211
 212                         extcon_set_state_sync(usbsw->edev, cable, attached);
 213                         cables &= ~BIT_ULL(cable);
 214                 }
 215
 216                 mask &= ~BIT_ULL(dev);
 217         }
 218 }
 219
 220 static void fsa9480_detect_dev(struct fsa9480_usbsw *usbsw)
 221 {
 222         int val1, val2;
 223         u16 val;
 224
 225         val1 = fsa9480_read_reg(usbsw, FSA9480_REG_DEV_T1);
 226         val2 = fsa9480_read_reg(usbsw, FSA9480_REG_DEV_T2);
 227         if (val1 < 0 || val2 < 0) {
 228                 dev_err(usbsw->dev, "%s: failed to read registers", __func__);
 229                 return;
 230         }
 231         val = val2 << 8 | val1;
 232
 233         dev_info(usbsw->dev, "dev1: 0x%x, dev2: 0x%x\n", val1, val2);
 234
 235         /* handle detached cables first */
 236         fsa9480_handle_change(usbsw, usbsw->cable & ~val, false);
 237
 238         /* then handle attached ones */
 239         fsa9480_handle_change(usbsw, val & ~usbsw->cable, true);
 240
 241         usbsw->cable = val;
 242 }
 243
 244 static irqreturn_t fsa9480_irq_handler(int irq, void *data)
 245 {
 246         struct fsa9480_usbsw *usbsw = data;
 247         int intr = 0;
 248
 249         /* clear interrupt */
 250         fsa9480_read_irq(usbsw, &intr);
 251         if (!intr)
 252                 return IRQ_NONE;
 253
 254         /* device detection */
 255         fsa9480_detect_dev(usbsw);
 256
 257         return IRQ_HANDLED;
 258 }
 259
 260 static int fsa9480_probe(struct i2c_client *client,
 261                          const struct i2c_device_id *id)
 262 {
 263         struct fsa9480_usbsw *info;
 264         int ret;
 265
 266         if (!client->irq) {
 267                 dev_err(&client->dev, "no interrupt provided\n");
 268                 return -EINVAL;
 269         }
 270
 271         info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
 272         if (!info)
 273                 return -ENOMEM;
 274         info->dev = &client->dev;
 275
 276         i2c_set_clientdata(client, info);
 277
 278         /* External connector */
 279         info->edev = devm_extcon_dev_allocate(info->dev,
 280                                               fsa9480_extcon_cable);
 281         if (IS_ERR(info->edev)) {
 282                 dev_err(info->dev, "failed to allocate memory for extcon\n");
 283                 ret = -ENOMEM;
 284                 return ret;
 285         }
 286
 287         ret = devm_extcon_dev_register(info->dev, info->edev);
 288         if (ret) {
 289                 dev_err(info->dev, "failed to register extcon device\n");
 290                 return ret;
 291         }
 292
 293         info->regmap = devm_regmap_init_i2c(client, &fsa9480_regmap_config);
 294         if (IS_ERR(info->regmap)) {
 295                 ret = PTR_ERR(info->regmap);
 296                 dev_err(info->dev, "failed to allocate register map: %d\n",
 297                         ret);
 298                 return ret;
 299         }
 300
 301         /* ADC Detect Time: 500ms */
 302         fsa9480_write_reg(info, FSA9480_REG_TIMING1, TIMING1_ADC_500MS);
 303
 304         /* configure automatic switching */
 305         fsa9480_write_reg(info, FSA9480_REG_CTRL, CON_MASK);
 306
 307         /* unmask interrupt (attach/detach only) */
 308         fsa9480_write_reg(info, FSA9480_REG_INT1_MASK,
 309                           INT1_MASK & ~(INT_ATTACH | INT_DETACH));
 310         fsa9480_write_reg(info, FSA9480_REG_INT2_MASK, INT2_MASK);
 311
 312         ret = devm_request_threaded_irq(info->dev, client->irq, NULL,
 313                                         fsa9480_irq_handler,
 314                                         IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 315                                         "fsa9480", info);
 316         if (ret) {
 317                 dev_err(info->dev, "failed to request IRQ\n");
 318                 return ret;
 319         }
 320
 321         device_init_wakeup(info->dev, true);
 322         fsa9480_detect_dev(info);
 323
 324         return 0;
 325 }
 326
 327 static int fsa9480_remove(struct i2c_client *client)
 328 {
 329         return 0;
 330 }
 331
 332 #ifdef CONFIG_PM_SLEEP
 333 static int fsa9480_suspend(struct device *dev)
 334 {
 335         struct i2c_client *client = to_i2c_client(dev);
 336
 337         if (device_may_wakeup(&client->dev) && client->irq)
 338                 enable_irq_wake(client->irq);
 339
 340         return 0;
 341 }
 342
 343 static int fsa9480_resume(struct device *dev)
 344 {
 345         struct i2c_client *client = to_i2c_client(dev);
 346
 347         if (device_may_wakeup(&client->dev) && client->irq)
 348                 disable_irq_wake(client->irq);
 349
 350         return 0;
 351 }
 352 #endif
 353
 354 static const struct dev_pm_ops fsa9480_pm_ops = {
 355         SET_SYSTEM_SLEEP_PM_OPS(fsa9480_suspend, fsa9480_resume)
 356 };
 357
 358 static const struct i2c_device_id fsa9480_id[] = {
 359         { "fsa9480", 0 },
 360         {}
 361 };
 362 MODULE_DEVICE_TABLE(i2c, fsa9480_id);
 363
 364 static const struct of_device_id fsa9480_of_match[] = {
 365         { .compatible = "fcs,fsa9480", },
 366         { .compatible = "fcs,fsa880", },
 367         { .compatible = "ti,tsu6111", },
 368         { },
 369 };
 370 MODULE_DEVICE_TABLE(of, fsa9480_of_match);
 371
 372 static struct i2c_driver fsa9480_i2c_driver = {
 373         .driver                 = {
 374                 .name           = "fsa9480",
 375                 .pm             = &fsa9480_pm_ops,
 376                 .of_match_table = fsa9480_of_match,
 377         },
 378         .probe                  = fsa9480_probe,
 379         .remove                 = fsa9480_remove,
 380         .id_table               = fsa9480_id,
 381 };
 382
 383 static int __init fsa9480_module_init(void)
 384 {
 385         return i2c_add_driver(&fsa9480_i2c_driver);
 386 }
 387 subsys_initcall(fsa9480_module_init);
 388
 389 static void __exit fsa9480_module_exit(void)
 390 {
 391         i2c_del_driver(&fsa9480_i2c_driver);
 392 }
 393 module_exit(fsa9480_module_exit);
 394
 395 MODULE_DESCRIPTION("Fairchild Semiconductor FSA9480 extcon driver");
 396 MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>");
 397 MODULE_LICENSE("GPL");