]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - drivers/gpio/gpio-aspeed.c
PCI: PM: Skip devices in D0 for suspend-to-idle
[mirror_ubuntu-bionic-kernel.git] / drivers / gpio / gpio-aspeed.c
1 /*
2 * Copyright 2015 IBM Corp.
3 *
4 * Joel Stanley <joel@jms.id.au>
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
10 */
11
12 #include <asm/div64.h>
13 #include <linux/clk.h>
14 #include <linux/gpio/driver.h>
15 #include <linux/hashtable.h>
16 #include <linux/init.h>
17 #include <linux/io.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/pinctrl/consumer.h>
21 #include <linux/platform_device.h>
22 #include <linux/spinlock.h>
23 #include <linux/string.h>
24
25 struct aspeed_bank_props {
26 unsigned int bank;
27 u32 input;
28 u32 output;
29 };
30
31 struct aspeed_gpio_config {
32 unsigned int nr_gpios;
33 const struct aspeed_bank_props *props;
34 };
35
36 /*
37 * @offset_timer: Maps an offset to an @timer_users index, or zero if disabled
38 * @timer_users: Tracks the number of users for each timer
39 *
40 * The @timer_users has four elements but the first element is unused. This is
41 * to simplify accounting and indexing, as a zero value in @offset_timer
42 * represents disabled debouncing for the GPIO. Any other value for an element
43 * of @offset_timer is used as an index into @timer_users. This behaviour of
44 * the zero value aligns with the behaviour of zero built from the timer
45 * configuration registers (i.e. debouncing is disabled).
46 */
47 struct aspeed_gpio {
48 struct gpio_chip chip;
49 spinlock_t lock;
50 void __iomem *base;
51 int irq;
52 const struct aspeed_gpio_config *config;
53
54 u8 *offset_timer;
55 unsigned int timer_users[4];
56 struct clk *clk;
57 };
58
59 struct aspeed_gpio_bank {
60 uint16_t val_regs;
61 uint16_t irq_regs;
62 uint16_t debounce_regs;
63 const char names[4][3];
64 };
65
66 static const int debounce_timers[4] = { 0x00, 0x50, 0x54, 0x58 };
67
68 static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
69 {
70 .val_regs = 0x0000,
71 .irq_regs = 0x0008,
72 .debounce_regs = 0x0040,
73 .names = { "A", "B", "C", "D" },
74 },
75 {
76 .val_regs = 0x0020,
77 .irq_regs = 0x0028,
78 .debounce_regs = 0x0048,
79 .names = { "E", "F", "G", "H" },
80 },
81 {
82 .val_regs = 0x0070,
83 .irq_regs = 0x0098,
84 .debounce_regs = 0x00b0,
85 .names = { "I", "J", "K", "L" },
86 },
87 {
88 .val_regs = 0x0078,
89 .irq_regs = 0x00e8,
90 .debounce_regs = 0x0100,
91 .names = { "M", "N", "O", "P" },
92 },
93 {
94 .val_regs = 0x0080,
95 .irq_regs = 0x0118,
96 .debounce_regs = 0x0130,
97 .names = { "Q", "R", "S", "T" },
98 },
99 {
100 .val_regs = 0x0088,
101 .irq_regs = 0x0148,
102 .debounce_regs = 0x0160,
103 .names = { "U", "V", "W", "X" },
104 },
105 {
106 .val_regs = 0x01E0,
107 .irq_regs = 0x0178,
108 .debounce_regs = 0x0190,
109 .names = { "Y", "Z", "AA", "AB" },
110 },
111 {
112 .val_regs = 0x01E8,
113 .irq_regs = 0x01A8,
114 .debounce_regs = 0x01c0,
115 .names = { "AC", "", "", "" },
116 },
117 };
118
119 #define GPIO_BANK(x) ((x) >> 5)
120 #define GPIO_OFFSET(x) ((x) & 0x1f)
121 #define GPIO_BIT(x) BIT(GPIO_OFFSET(x))
122
123 #define GPIO_DATA 0x00
124 #define GPIO_DIR 0x04
125
126 #define GPIO_IRQ_ENABLE 0x00
127 #define GPIO_IRQ_TYPE0 0x04
128 #define GPIO_IRQ_TYPE1 0x08
129 #define GPIO_IRQ_TYPE2 0x0c
130 #define GPIO_IRQ_STATUS 0x10
131
132 #define GPIO_DEBOUNCE_SEL1 0x00
133 #define GPIO_DEBOUNCE_SEL2 0x04
134
135 #define _GPIO_SET_DEBOUNCE(t, o, i) ((!!((t) & BIT(i))) << GPIO_OFFSET(o))
136 #define GPIO_SET_DEBOUNCE1(t, o) _GPIO_SET_DEBOUNCE(t, o, 1)
137 #define GPIO_SET_DEBOUNCE2(t, o) _GPIO_SET_DEBOUNCE(t, o, 0)
138
139 static const struct aspeed_gpio_bank *to_bank(unsigned int offset)
140 {
141 unsigned int bank = GPIO_BANK(offset);
142
143 WARN_ON(bank > ARRAY_SIZE(aspeed_gpio_banks));
144 return &aspeed_gpio_banks[bank];
145 }
146
147 static inline bool is_bank_props_sentinel(const struct aspeed_bank_props *props)
148 {
149 return !(props->input || props->output);
150 }
151
152 static inline const struct aspeed_bank_props *find_bank_props(
153 struct aspeed_gpio *gpio, unsigned int offset)
154 {
155 const struct aspeed_bank_props *props = gpio->config->props;
156
157 while (!is_bank_props_sentinel(props)) {
158 if (props->bank == GPIO_BANK(offset))
159 return props;
160 props++;
161 }
162
163 return NULL;
164 }
165
166 static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset)
167 {
168 const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
169 const struct aspeed_gpio_bank *bank = to_bank(offset);
170 unsigned int group = GPIO_OFFSET(offset) / 8;
171
172 return bank->names[group][0] != '\0' &&
173 (!props || ((props->input | props->output) & GPIO_BIT(offset)));
174 }
175
176 static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset)
177 {
178 const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
179
180 return !props || (props->input & GPIO_BIT(offset));
181 }
182
183 #define have_irq(g, o) have_input((g), (o))
184 #define have_debounce(g, o) have_input((g), (o))
185
186 static inline bool have_output(struct aspeed_gpio *gpio, unsigned int offset)
187 {
188 const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
189
190 return !props || (props->output & GPIO_BIT(offset));
191 }
192
193 static void __iomem *bank_val_reg(struct aspeed_gpio *gpio,
194 const struct aspeed_gpio_bank *bank,
195 unsigned int reg)
196 {
197 return gpio->base + bank->val_regs + reg;
198 }
199
200 static void __iomem *bank_irq_reg(struct aspeed_gpio *gpio,
201 const struct aspeed_gpio_bank *bank,
202 unsigned int reg)
203 {
204 return gpio->base + bank->irq_regs + reg;
205 }
206
207 static int aspeed_gpio_get(struct gpio_chip *gc, unsigned int offset)
208 {
209 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
210 const struct aspeed_gpio_bank *bank = to_bank(offset);
211
212 return !!(ioread32(bank_val_reg(gpio, bank, GPIO_DATA))
213 & GPIO_BIT(offset));
214 }
215
216 static void __aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
217 int val)
218 {
219 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
220 const struct aspeed_gpio_bank *bank = to_bank(offset);
221 void __iomem *addr;
222 u32 reg;
223
224 addr = bank_val_reg(gpio, bank, GPIO_DATA);
225 reg = ioread32(addr);
226
227 if (val)
228 reg |= GPIO_BIT(offset);
229 else
230 reg &= ~GPIO_BIT(offset);
231
232 iowrite32(reg, addr);
233 }
234
235 static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
236 int val)
237 {
238 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
239 unsigned long flags;
240
241 spin_lock_irqsave(&gpio->lock, flags);
242
243 __aspeed_gpio_set(gc, offset, val);
244
245 spin_unlock_irqrestore(&gpio->lock, flags);
246 }
247
248 static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
249 {
250 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
251 const struct aspeed_gpio_bank *bank = to_bank(offset);
252 unsigned long flags;
253 u32 reg;
254
255 if (!have_input(gpio, offset))
256 return -ENOTSUPP;
257
258 spin_lock_irqsave(&gpio->lock, flags);
259
260 reg = ioread32(bank_val_reg(gpio, bank, GPIO_DIR));
261 iowrite32(reg & ~GPIO_BIT(offset), bank_val_reg(gpio, bank, GPIO_DIR));
262
263 spin_unlock_irqrestore(&gpio->lock, flags);
264
265 return 0;
266 }
267
268 static int aspeed_gpio_dir_out(struct gpio_chip *gc,
269 unsigned int offset, int val)
270 {
271 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
272 const struct aspeed_gpio_bank *bank = to_bank(offset);
273 unsigned long flags;
274 u32 reg;
275
276 if (!have_output(gpio, offset))
277 return -ENOTSUPP;
278
279 spin_lock_irqsave(&gpio->lock, flags);
280
281 reg = ioread32(bank_val_reg(gpio, bank, GPIO_DIR));
282 iowrite32(reg | GPIO_BIT(offset), bank_val_reg(gpio, bank, GPIO_DIR));
283
284 __aspeed_gpio_set(gc, offset, val);
285
286 spin_unlock_irqrestore(&gpio->lock, flags);
287
288 return 0;
289 }
290
291 static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
292 {
293 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
294 const struct aspeed_gpio_bank *bank = to_bank(offset);
295 unsigned long flags;
296 u32 val;
297
298 if (!have_input(gpio, offset))
299 return 0;
300
301 if (!have_output(gpio, offset))
302 return 1;
303
304 spin_lock_irqsave(&gpio->lock, flags);
305
306 val = ioread32(bank_val_reg(gpio, bank, GPIO_DIR)) & GPIO_BIT(offset);
307
308 spin_unlock_irqrestore(&gpio->lock, flags);
309
310 return !val;
311
312 }
313
314 static inline int irqd_to_aspeed_gpio_data(struct irq_data *d,
315 struct aspeed_gpio **gpio,
316 const struct aspeed_gpio_bank **bank,
317 u32 *bit)
318 {
319 int offset;
320 struct aspeed_gpio *internal;
321
322 offset = irqd_to_hwirq(d);
323
324 internal = irq_data_get_irq_chip_data(d);
325
326 /* This might be a bit of a questionable place to check */
327 if (!have_irq(internal, offset))
328 return -ENOTSUPP;
329
330 *gpio = internal;
331 *bank = to_bank(offset);
332 *bit = GPIO_BIT(offset);
333
334 return 0;
335 }
336
337 static void aspeed_gpio_irq_ack(struct irq_data *d)
338 {
339 const struct aspeed_gpio_bank *bank;
340 struct aspeed_gpio *gpio;
341 unsigned long flags;
342 void __iomem *status_addr;
343 u32 bit;
344 int rc;
345
346 rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit);
347 if (rc)
348 return;
349
350 status_addr = bank_irq_reg(gpio, bank, GPIO_IRQ_STATUS);
351
352 spin_lock_irqsave(&gpio->lock, flags);
353 iowrite32(bit, status_addr);
354 spin_unlock_irqrestore(&gpio->lock, flags);
355 }
356
357 static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
358 {
359 const struct aspeed_gpio_bank *bank;
360 struct aspeed_gpio *gpio;
361 unsigned long flags;
362 u32 reg, bit;
363 void __iomem *addr;
364 int rc;
365
366 rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit);
367 if (rc)
368 return;
369
370 addr = bank_irq_reg(gpio, bank, GPIO_IRQ_ENABLE);
371
372 spin_lock_irqsave(&gpio->lock, flags);
373
374 reg = ioread32(addr);
375 if (set)
376 reg |= bit;
377 else
378 reg &= ~bit;
379 iowrite32(reg, addr);
380
381 spin_unlock_irqrestore(&gpio->lock, flags);
382 }
383
384 static void aspeed_gpio_irq_mask(struct irq_data *d)
385 {
386 aspeed_gpio_irq_set_mask(d, false);
387 }
388
389 static void aspeed_gpio_irq_unmask(struct irq_data *d)
390 {
391 aspeed_gpio_irq_set_mask(d, true);
392 }
393
394 static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
395 {
396 u32 type0 = 0;
397 u32 type1 = 0;
398 u32 type2 = 0;
399 u32 bit, reg;
400 const struct aspeed_gpio_bank *bank;
401 irq_flow_handler_t handler;
402 struct aspeed_gpio *gpio;
403 unsigned long flags;
404 void __iomem *addr;
405 int rc;
406
407 rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit);
408 if (rc)
409 return -EINVAL;
410
411 switch (type & IRQ_TYPE_SENSE_MASK) {
412 case IRQ_TYPE_EDGE_BOTH:
413 type2 |= bit;
414 /* fall through */
415 case IRQ_TYPE_EDGE_RISING:
416 type0 |= bit;
417 /* fall through */
418 case IRQ_TYPE_EDGE_FALLING:
419 handler = handle_edge_irq;
420 break;
421 case IRQ_TYPE_LEVEL_HIGH:
422 type0 |= bit;
423 /* fall through */
424 case IRQ_TYPE_LEVEL_LOW:
425 type1 |= bit;
426 handler = handle_level_irq;
427 break;
428 default:
429 return -EINVAL;
430 }
431
432 spin_lock_irqsave(&gpio->lock, flags);
433
434 addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE0);
435 reg = ioread32(addr);
436 reg = (reg & ~bit) | type0;
437 iowrite32(reg, addr);
438
439 addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE1);
440 reg = ioread32(addr);
441 reg = (reg & ~bit) | type1;
442 iowrite32(reg, addr);
443
444 addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE2);
445 reg = ioread32(addr);
446 reg = (reg & ~bit) | type2;
447 iowrite32(reg, addr);
448
449 spin_unlock_irqrestore(&gpio->lock, flags);
450
451 irq_set_handler_locked(d, handler);
452
453 return 0;
454 }
455
456 static void aspeed_gpio_irq_handler(struct irq_desc *desc)
457 {
458 struct gpio_chip *gc = irq_desc_get_handler_data(desc);
459 struct irq_chip *ic = irq_desc_get_chip(desc);
460 struct aspeed_gpio *data = gpiochip_get_data(gc);
461 unsigned int i, p, girq;
462 unsigned long reg;
463
464 chained_irq_enter(ic, desc);
465
466 for (i = 0; i < ARRAY_SIZE(aspeed_gpio_banks); i++) {
467 const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i];
468
469 reg = ioread32(bank_irq_reg(data, bank, GPIO_IRQ_STATUS));
470
471 for_each_set_bit(p, &reg, 32) {
472 girq = irq_find_mapping(gc->irq.domain, i * 32 + p);
473 generic_handle_irq(girq);
474 }
475
476 }
477
478 chained_irq_exit(ic, desc);
479 }
480
481 static struct irq_chip aspeed_gpio_irqchip = {
482 .name = "aspeed-gpio",
483 .irq_ack = aspeed_gpio_irq_ack,
484 .irq_mask = aspeed_gpio_irq_mask,
485 .irq_unmask = aspeed_gpio_irq_unmask,
486 .irq_set_type = aspeed_gpio_set_type,
487 };
488
489 static void set_irq_valid_mask(struct aspeed_gpio *gpio)
490 {
491 const struct aspeed_bank_props *props = gpio->config->props;
492
493 while (!is_bank_props_sentinel(props)) {
494 unsigned int offset;
495 const unsigned long int input = props->input;
496
497 /* Pretty crummy approach, but similar to GPIO core */
498 for_each_clear_bit(offset, &input, 32) {
499 unsigned int i = props->bank * 32 + offset;
500
501 if (i >= gpio->config->nr_gpios)
502 break;
503
504 clear_bit(i, gpio->chip.irq.valid_mask);
505 }
506
507 props++;
508 }
509 }
510
511 static int aspeed_gpio_setup_irqs(struct aspeed_gpio *gpio,
512 struct platform_device *pdev)
513 {
514 int rc;
515
516 rc = platform_get_irq(pdev, 0);
517 if (rc < 0)
518 return rc;
519
520 gpio->irq = rc;
521
522 set_irq_valid_mask(gpio);
523
524 rc = gpiochip_irqchip_add(&gpio->chip, &aspeed_gpio_irqchip,
525 0, handle_bad_irq, IRQ_TYPE_NONE);
526 if (rc) {
527 dev_info(&pdev->dev, "Could not add irqchip\n");
528 return rc;
529 }
530
531 gpiochip_set_chained_irqchip(&gpio->chip, &aspeed_gpio_irqchip,
532 gpio->irq, aspeed_gpio_irq_handler);
533
534 return 0;
535 }
536
537 static int aspeed_gpio_request(struct gpio_chip *chip, unsigned int offset)
538 {
539 if (!have_gpio(gpiochip_get_data(chip), offset))
540 return -ENODEV;
541
542 return pinctrl_gpio_request(chip->base + offset);
543 }
544
545 static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset)
546 {
547 pinctrl_gpio_free(chip->base + offset);
548 }
549
550 static inline void __iomem *bank_debounce_reg(struct aspeed_gpio *gpio,
551 const struct aspeed_gpio_bank *bank,
552 unsigned int reg)
553 {
554 return gpio->base + bank->debounce_regs + reg;
555 }
556
557 static int usecs_to_cycles(struct aspeed_gpio *gpio, unsigned long usecs,
558 u32 *cycles)
559 {
560 u64 rate;
561 u64 n;
562 u32 r;
563
564 rate = clk_get_rate(gpio->clk);
565 if (!rate)
566 return -ENOTSUPP;
567
568 n = rate * usecs;
569 r = do_div(n, 1000000);
570
571 if (n >= U32_MAX)
572 return -ERANGE;
573
574 /* At least as long as the requested time */
575 *cycles = n + (!!r);
576
577 return 0;
578 }
579
580 /* Call under gpio->lock */
581 static int register_allocated_timer(struct aspeed_gpio *gpio,
582 unsigned int offset, unsigned int timer)
583 {
584 if (WARN(gpio->offset_timer[offset] != 0,
585 "Offset %d already allocated timer %d\n",
586 offset, gpio->offset_timer[offset]))
587 return -EINVAL;
588
589 if (WARN(gpio->timer_users[timer] == UINT_MAX,
590 "Timer user count would overflow\n"))
591 return -EPERM;
592
593 gpio->offset_timer[offset] = timer;
594 gpio->timer_users[timer]++;
595
596 return 0;
597 }
598
599 /* Call under gpio->lock */
600 static int unregister_allocated_timer(struct aspeed_gpio *gpio,
601 unsigned int offset)
602 {
603 if (WARN(gpio->offset_timer[offset] == 0,
604 "No timer allocated to offset %d\n", offset))
605 return -EINVAL;
606
607 if (WARN(gpio->timer_users[gpio->offset_timer[offset]] == 0,
608 "No users recorded for timer %d\n",
609 gpio->offset_timer[offset]))
610 return -EINVAL;
611
612 gpio->timer_users[gpio->offset_timer[offset]]--;
613 gpio->offset_timer[offset] = 0;
614
615 return 0;
616 }
617
618 /* Call under gpio->lock */
619 static inline bool timer_allocation_registered(struct aspeed_gpio *gpio,
620 unsigned int offset)
621 {
622 return gpio->offset_timer[offset] > 0;
623 }
624
625 /* Call under gpio->lock */
626 static void configure_timer(struct aspeed_gpio *gpio, unsigned int offset,
627 unsigned int timer)
628 {
629 const struct aspeed_gpio_bank *bank = to_bank(offset);
630 const u32 mask = GPIO_BIT(offset);
631 void __iomem *addr;
632 u32 val;
633
634 addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL1);
635 val = ioread32(addr);
636 iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE1(timer, offset), addr);
637
638 addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL2);
639 val = ioread32(addr);
640 iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE2(timer, offset), addr);
641 }
642
643 static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
644 unsigned long usecs)
645 {
646 struct aspeed_gpio *gpio = gpiochip_get_data(chip);
647 u32 requested_cycles;
648 unsigned long flags;
649 int rc;
650 int i;
651
652 if (!gpio->clk)
653 return -EINVAL;
654
655 rc = usecs_to_cycles(gpio, usecs, &requested_cycles);
656 if (rc < 0) {
657 dev_warn(chip->parent, "Failed to convert %luus to cycles at %luHz: %d\n",
658 usecs, clk_get_rate(gpio->clk), rc);
659 return rc;
660 }
661
662 spin_lock_irqsave(&gpio->lock, flags);
663
664 if (timer_allocation_registered(gpio, offset)) {
665 rc = unregister_allocated_timer(gpio, offset);
666 if (rc < 0)
667 goto out;
668 }
669
670 /* Try to find a timer already configured for the debounce period */
671 for (i = 1; i < ARRAY_SIZE(debounce_timers); i++) {
672 u32 cycles;
673
674 cycles = ioread32(gpio->base + debounce_timers[i]);
675 if (requested_cycles == cycles)
676 break;
677 }
678
679 if (i == ARRAY_SIZE(debounce_timers)) {
680 int j;
681
682 /*
683 * As there are no timers configured for the requested debounce
684 * period, find an unused timer instead
685 */
686 for (j = 1; j < ARRAY_SIZE(gpio->timer_users); j++) {
687 if (gpio->timer_users[j] == 0)
688 break;
689 }
690
691 if (j == ARRAY_SIZE(gpio->timer_users)) {
692 dev_warn(chip->parent,
693 "Debounce timers exhausted, cannot debounce for period %luus\n",
694 usecs);
695
696 rc = -EPERM;
697
698 /*
699 * We already adjusted the accounting to remove @offset
700 * as a user of its previous timer, so also configure
701 * the hardware so @offset has timers disabled for
702 * consistency.
703 */
704 configure_timer(gpio, offset, 0);
705 goto out;
706 }
707
708 i = j;
709
710 iowrite32(requested_cycles, gpio->base + debounce_timers[i]);
711 }
712
713 if (WARN(i == 0, "Cannot register index of disabled timer\n")) {
714 rc = -EINVAL;
715 goto out;
716 }
717
718 register_allocated_timer(gpio, offset, i);
719 configure_timer(gpio, offset, i);
720
721 out:
722 spin_unlock_irqrestore(&gpio->lock, flags);
723
724 return rc;
725 }
726
727 static int disable_debounce(struct gpio_chip *chip, unsigned int offset)
728 {
729 struct aspeed_gpio *gpio = gpiochip_get_data(chip);
730 unsigned long flags;
731 int rc;
732
733 spin_lock_irqsave(&gpio->lock, flags);
734
735 rc = unregister_allocated_timer(gpio, offset);
736 if (!rc)
737 configure_timer(gpio, offset, 0);
738
739 spin_unlock_irqrestore(&gpio->lock, flags);
740
741 return rc;
742 }
743
744 static int set_debounce(struct gpio_chip *chip, unsigned int offset,
745 unsigned long usecs)
746 {
747 struct aspeed_gpio *gpio = gpiochip_get_data(chip);
748
749 if (!have_debounce(gpio, offset))
750 return -ENOTSUPP;
751
752 if (usecs)
753 return enable_debounce(chip, offset, usecs);
754
755 return disable_debounce(chip, offset);
756 }
757
758 static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
759 unsigned long config)
760 {
761 unsigned long param = pinconf_to_config_param(config);
762 u32 arg = pinconf_to_config_argument(config);
763
764 if (param == PIN_CONFIG_INPUT_DEBOUNCE)
765 return set_debounce(chip, offset, arg);
766 else if (param == PIN_CONFIG_BIAS_DISABLE ||
767 param == PIN_CONFIG_BIAS_PULL_DOWN ||
768 param == PIN_CONFIG_DRIVE_STRENGTH)
769 return pinctrl_gpio_set_config(offset, config);
770 else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN ||
771 param == PIN_CONFIG_DRIVE_OPEN_SOURCE)
772 /* Return -ENOTSUPP to trigger emulation, as per datasheet */
773 return -ENOTSUPP;
774
775 return -ENOTSUPP;
776 }
777
778 /*
779 * Any banks not specified in a struct aspeed_bank_props array are assumed to
780 * have the properties:
781 *
782 * { .input = 0xffffffff, .output = 0xffffffff }
783 */
784
785 static const struct aspeed_bank_props ast2400_bank_props[] = {
786 /* input output */
787 { 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */
788 { 6, 0x0000000f, 0x0fffff0f }, /* Y/Z/AA/AB, two 4-GPIO holes */
789 { },
790 };
791
792 static const struct aspeed_gpio_config ast2400_config =
793 /* 220 for simplicity, really 216 with two 4-GPIO holes, four at end */
794 { .nr_gpios = 220, .props = ast2400_bank_props, };
795
796 static const struct aspeed_bank_props ast2500_bank_props[] = {
797 /* input output */
798 { 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */
799 { 6, 0x0fffffff, 0x0fffffff }, /* Y/Z/AA/AB, 4-GPIO hole */
800 { 7, 0x000000ff, 0x000000ff }, /* AC */
801 { },
802 };
803
804 static const struct aspeed_gpio_config ast2500_config =
805 /* 232 for simplicity, actual number is 228 (4-GPIO hole in GPIOAB) */
806 { .nr_gpios = 232, .props = ast2500_bank_props, };
807
808 static const struct of_device_id aspeed_gpio_of_table[] = {
809 { .compatible = "aspeed,ast2400-gpio", .data = &ast2400_config, },
810 { .compatible = "aspeed,ast2500-gpio", .data = &ast2500_config, },
811 {}
812 };
813 MODULE_DEVICE_TABLE(of, aspeed_gpio_of_table);
814
815 static int __init aspeed_gpio_probe(struct platform_device *pdev)
816 {
817 const struct of_device_id *gpio_id;
818 struct aspeed_gpio *gpio;
819 struct resource *res;
820 int rc;
821
822 gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
823 if (!gpio)
824 return -ENOMEM;
825
826 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
827 gpio->base = devm_ioremap_resource(&pdev->dev, res);
828 if (IS_ERR(gpio->base))
829 return PTR_ERR(gpio->base);
830
831 spin_lock_init(&gpio->lock);
832
833 gpio_id = of_match_node(aspeed_gpio_of_table, pdev->dev.of_node);
834 if (!gpio_id)
835 return -EINVAL;
836
837 gpio->clk = of_clk_get(pdev->dev.of_node, 0);
838 if (IS_ERR(gpio->clk)) {
839 dev_warn(&pdev->dev,
840 "Failed to get clock from devicetree, debouncing disabled\n");
841 gpio->clk = NULL;
842 }
843
844 gpio->config = gpio_id->data;
845
846 gpio->chip.parent = &pdev->dev;
847 gpio->chip.ngpio = gpio->config->nr_gpios;
848 gpio->chip.parent = &pdev->dev;
849 gpio->chip.direction_input = aspeed_gpio_dir_in;
850 gpio->chip.direction_output = aspeed_gpio_dir_out;
851 gpio->chip.get_direction = aspeed_gpio_get_direction;
852 gpio->chip.request = aspeed_gpio_request;
853 gpio->chip.free = aspeed_gpio_free;
854 gpio->chip.get = aspeed_gpio_get;
855 gpio->chip.set = aspeed_gpio_set;
856 gpio->chip.set_config = aspeed_gpio_set_config;
857 gpio->chip.label = dev_name(&pdev->dev);
858 gpio->chip.base = -1;
859 gpio->chip.irq.need_valid_mask = true;
860
861 rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
862 if (rc < 0)
863 return rc;
864
865 gpio->offset_timer =
866 devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL);
867
868 return aspeed_gpio_setup_irqs(gpio, pdev);
869 }
870
871 static struct platform_driver aspeed_gpio_driver = {
872 .driver = {
873 .name = KBUILD_MODNAME,
874 .of_match_table = aspeed_gpio_of_table,
875 },
876 };
877
878 module_platform_driver_probe(aspeed_gpio_driver, aspeed_gpio_probe);
879
880 MODULE_DESCRIPTION("Aspeed GPIO Driver");
881 MODULE_LICENSE("GPL");