drivers/gpio/gpio-ich.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver
   4  *
   5  * Copyright (C) 2010 Extreme Engineering Solutions.
   6  */
   7
   8
   9 #include <linux/bitops.h>
  10 #include <linux/gpio/driver.h>
  11 #include <linux/ioport.h>
  12 #include <linux/mfd/lpc_ich.h>
  13 #include <linux/module.h>
  14 #include <linux/pci.h>
  15 #include <linux/platform_device.h>
  16
  17 #define DRV_NAME "gpio_ich"
  18
  19 /*
  20  * GPIO register offsets in GPIO I/O space.
  21  * Each chunk of 32 GPIOs is manipulated via its own USE_SELx, IO_SELx, and
  22  * LVLx registers.  Logic in the read/write functions takes a register and
  23  * an absolute bit number and determines the proper register offset and bit
  24  * number in that register.  For example, to read the value of GPIO bit 50
  25  * the code would access offset ichx_regs[2(=GPIO_LVL)][1(=50/32)],
  26  * bit 18 (50%32).
  27  */
  28 enum GPIO_REG {
  29         GPIO_USE_SEL = 0,
  30         GPIO_IO_SEL,
  31         GPIO_LVL,
  32         GPO_BLINK
  33 };
  34
  35 static const u8 ichx_regs[4][3] = {
  36         {0x00, 0x30, 0x40},     /* USE_SEL[1-3] offsets */
  37         {0x04, 0x34, 0x44},     /* IO_SEL[1-3] offsets */
  38         {0x0c, 0x38, 0x48},     /* LVL[1-3] offsets */
  39         {0x18, 0x18, 0x18},     /* BLINK offset */
  40 };
  41
  42 static const u8 ichx_reglen[3] = {
  43         0x30, 0x10, 0x10,
  44 };
  45
  46 static const u8 avoton_regs[4][3] = {
  47         {0x00, 0x80, 0x00},
  48         {0x04, 0x84, 0x00},
  49         {0x08, 0x88, 0x00},
  50 };
  51
  52 static const u8 avoton_reglen[3] = {
  53         0x10, 0x10, 0x00,
  54 };
  55
  56 #define ICHX_WRITE(val, reg, base_res)  outl(val, (reg) + (base_res)->start)
  57 #define ICHX_READ(reg, base_res)        inl((reg) + (base_res)->start)
  58
  59 struct ichx_desc {
  60         /* Max GPIO pins the chipset can have */
  61         uint ngpio;
  62
  63         /* chipset registers */
  64         const u8 (*regs)[3];
  65         const u8 *reglen;
  66
  67         /* GPO_BLINK is available on this chipset */
  68         bool have_blink;
  69
  70         /* Whether the chipset has GPIO in GPE0_STS in the PM IO region */
  71         bool uses_gpe0;
  72
  73         /* USE_SEL is bogus on some chipsets, eg 3100 */
  74         u32 use_sel_ignore[3];
  75
  76         /* Some chipsets have quirks, let these use their own request/get */
  77         int (*request)(struct gpio_chip *chip, unsigned offset);
  78         int (*get)(struct gpio_chip *chip, unsigned offset);
  79
  80         /*
  81          * Some chipsets don't let reading output values on GPIO_LVL register
  82          * this option allows driver caching written output values
  83          */
  84         bool use_outlvl_cache;
  85 };
  86
  87 static struct {
  88         spinlock_t lock;
  89         struct device *dev;
  90         struct gpio_chip chip;
  91         struct resource *gpio_base;     /* GPIO IO base */
  92         struct resource *pm_base;       /* Power Mangagment IO base */
  93         struct ichx_desc *desc; /* Pointer to chipset-specific description */
  94         u32 orig_gpio_ctrl;     /* Orig CTRL value, used to restore on exit */
  95         u8 use_gpio;            /* Which GPIO groups are usable */
  96         int outlvl_cache[3];    /* cached output values */
  97 } ichx_priv;
  98
  99 static int modparam_gpiobase = -1;      /* dynamic */
 100 module_param_named(gpiobase, modparam_gpiobase, int, 0444);
 101 MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
 102
 103 static int ichx_write_bit(int reg, unsigned nr, int val, int verify)
 104 {
 105         unsigned long flags;
 106         u32 data, tmp;
 107         int reg_nr = nr / 32;
 108         int bit = nr & 0x1f;
 109
 110         spin_lock_irqsave(&ichx_priv.lock, flags);
 111
 112         if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
 113                 data = ichx_priv.outlvl_cache[reg_nr];
 114         else
 115                 data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
 116                                  ichx_priv.gpio_base);
 117
 118         if (val)
 119                 data |= BIT(bit);
 120         else
 121                 data &= ~BIT(bit);
 122         ICHX_WRITE(data, ichx_priv.desc->regs[reg][reg_nr],
 123                          ichx_priv.gpio_base);
 124         if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
 125                 ichx_priv.outlvl_cache[reg_nr] = data;
 126
 127         tmp = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
 128                         ichx_priv.gpio_base);
 129
 130         spin_unlock_irqrestore(&ichx_priv.lock, flags);
 131
 132         return (verify && data != tmp) ? -EPERM : 0;
 133 }
 134
 135 static int ichx_read_bit(int reg, unsigned nr)
 136 {
 137         unsigned long flags;
 138         u32 data;
 139         int reg_nr = nr / 32;
 140         int bit = nr & 0x1f;
 141
 142         spin_lock_irqsave(&ichx_priv.lock, flags);
 143
 144         data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
 145                          ichx_priv.gpio_base);
 146
 147         if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
 148                 data = ichx_priv.outlvl_cache[reg_nr] | data;
 149
 150         spin_unlock_irqrestore(&ichx_priv.lock, flags);
 151
 152         return !!(data & BIT(bit));
 153 }
 154
 155 static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned nr)
 156 {
 157         return !!(ichx_priv.use_gpio & BIT(nr / 32));
 158 }
 159
 160 static int ichx_gpio_get_direction(struct gpio_chip *gpio, unsigned nr)
 161 {
 162         return ichx_read_bit(GPIO_IO_SEL, nr);
 163 }
 164
 165 static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
 166 {
 167         /*
 168          * Try setting pin as an input and verify it worked since many pins
 169          * are output-only.
 170          */
 171         return ichx_write_bit(GPIO_IO_SEL, nr, 1, 1);
 172 }
 173
 174 static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
 175                                         int val)
 176 {
 177         /* Disable blink hardware which is available for GPIOs from 0 to 31. */
 178         if (nr < 32 && ichx_priv.desc->have_blink)
 179                 ichx_write_bit(GPO_BLINK, nr, 0, 0);
 180
 181         /* Set GPIO output value. */
 182         ichx_write_bit(GPIO_LVL, nr, val, 0);
 183
 184         /*
 185          * Try setting pin as an output and verify it worked since many pins
 186          * are input-only.
 187          */
 188         return ichx_write_bit(GPIO_IO_SEL, nr, 0, 1);
 189 }
 190
 191 static int ichx_gpio_get(struct gpio_chip *chip, unsigned nr)
 192 {
 193         return ichx_read_bit(GPIO_LVL, nr);
 194 }
 195
 196 static int ich6_gpio_get(struct gpio_chip *chip, unsigned nr)
 197 {
 198         unsigned long flags;
 199         u32 data;
 200
 201         /*
 202          * GPI 0 - 15 need to be read from the power management registers on
 203          * a ICH6/3100 bridge.
 204          */
 205         if (nr < 16) {
 206                 if (!ichx_priv.pm_base)
 207                         return -ENXIO;
 208
 209                 spin_lock_irqsave(&ichx_priv.lock, flags);
 210
 211                 /* GPI 0 - 15 are latched, write 1 to clear*/
 212                 ICHX_WRITE(BIT(16 + nr), 0, ichx_priv.pm_base);
 213                 data = ICHX_READ(0, ichx_priv.pm_base);
 214
 215                 spin_unlock_irqrestore(&ichx_priv.lock, flags);
 216
 217                 return !!((data >> 16) & BIT(nr));
 218         } else {
 219                 return ichx_gpio_get(chip, nr);
 220         }
 221 }
 222
 223 static int ichx_gpio_request(struct gpio_chip *chip, unsigned nr)
 224 {
 225         if (!ichx_gpio_check_available(chip, nr))
 226                 return -ENXIO;
 227
 228         /*
 229          * Note we assume the BIOS properly set a bridge's USE value.  Some
 230          * chips (eg Intel 3100) have bogus USE values though, so first see if
 231          * the chipset's USE value can be trusted for this specific bit.
 232          * If it can't be trusted, assume that the pin can be used as a GPIO.
 233          */
 234         if (ichx_priv.desc->use_sel_ignore[nr / 32] & BIT(nr & 0x1f))
 235                 return 0;
 236
 237         return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV;
 238 }
 239
 240 static int ich6_gpio_request(struct gpio_chip *chip, unsigned nr)
 241 {
 242         /*
 243          * Fixups for bits 16 and 17 are necessary on the Intel ICH6/3100
 244          * bridge as they are controlled by USE register bits 0 and 1.  See
 245          * "Table 704 GPIO_USE_SEL1 register" in the i3100 datasheet for
 246          * additional info.
 247          */
 248         if (nr == 16 || nr == 17)
 249                 nr -= 16;
 250
 251         return ichx_gpio_request(chip, nr);
 252 }
 253
 254 static void ichx_gpio_set(struct gpio_chip *chip, unsigned nr, int val)
 255 {
 256         ichx_write_bit(GPIO_LVL, nr, val, 0);
 257 }
 258
 259 static void ichx_gpiolib_setup(struct gpio_chip *chip)
 260 {
 261         chip->owner = THIS_MODULE;
 262         chip->label = DRV_NAME;
 263         chip->parent = ichx_priv.dev;
 264
 265         /* Allow chip-specific overrides of request()/get() */
 266         chip->request = ichx_priv.desc->request ?
 267                 ichx_priv.desc->request : ichx_gpio_request;
 268         chip->get = ichx_priv.desc->get ?
 269                 ichx_priv.desc->get : ichx_gpio_get;
 270
 271         chip->set = ichx_gpio_set;
 272         chip->get_direction = ichx_gpio_get_direction;
 273         chip->direction_input = ichx_gpio_direction_input;
 274         chip->direction_output = ichx_gpio_direction_output;
 275         chip->base = modparam_gpiobase;
 276         chip->ngpio = ichx_priv.desc->ngpio;
 277         chip->can_sleep = false;
 278         chip->dbg_show = NULL;
 279 }
 280
 281 /* ICH6-based, 631xesb-based */
 282 static struct ichx_desc ich6_desc = {
 283         /* Bridges using the ICH6 controller need fixups for GPIO 0 - 17 */
 284         .request = ich6_gpio_request,
 285         .get = ich6_gpio_get,
 286
 287         /* GPIO 0-15 are read in the GPE0_STS PM register */
 288         .uses_gpe0 = true,
 289
 290         .ngpio = 50,
 291         .have_blink = true,
 292         .regs = ichx_regs,
 293         .reglen = ichx_reglen,
 294 };
 295
 296 /* Intel 3100 */
 297 static struct ichx_desc i3100_desc = {
 298         /*
 299          * Bits 16,17, 20 of USE_SEL and bit 16 of USE_SEL2 always read 0 on
 300          * the Intel 3100.  See "Table 712. GPIO Summary Table" of 3100
 301          * Datasheet for more info.
 302          */
 303         .use_sel_ignore = {0x00130000, 0x00010000, 0x0},
 304
 305         /* The 3100 needs fixups for GPIO 0 - 17 */
 306         .request = ich6_gpio_request,
 307         .get = ich6_gpio_get,
 308
 309         /* GPIO 0-15 are read in the GPE0_STS PM register */
 310         .uses_gpe0 = true,
 311
 312         .ngpio = 50,
 313         .regs = ichx_regs,
 314         .reglen = ichx_reglen,
 315 };
 316
 317 /* ICH7 and ICH8-based */
 318 static struct ichx_desc ich7_desc = {
 319         .ngpio = 50,
 320         .have_blink = true,
 321         .regs = ichx_regs,
 322         .reglen = ichx_reglen,
 323 };
 324
 325 /* ICH9-based */
 326 static struct ichx_desc ich9_desc = {
 327         .ngpio = 61,
 328         .have_blink = true,
 329         .regs = ichx_regs,
 330         .reglen = ichx_reglen,
 331 };
 332
 333 /* ICH10-based - Consumer/corporate versions have different amount of GPIO */
 334 static struct ichx_desc ich10_cons_desc = {
 335         .ngpio = 61,
 336         .have_blink = true,
 337         .regs = ichx_regs,
 338         .reglen = ichx_reglen,
 339 };
 340 static struct ichx_desc ich10_corp_desc = {
 341         .ngpio = 72,
 342         .have_blink = true,
 343         .regs = ichx_regs,
 344         .reglen = ichx_reglen,
 345 };
 346
 347 /* Intel 5 series, 6 series, 3400 series, and C200 series */
 348 static struct ichx_desc intel5_desc = {
 349         .ngpio = 76,
 350         .regs = ichx_regs,
 351         .reglen = ichx_reglen,
 352 };
 353
 354 /* Avoton */
 355 static struct ichx_desc avoton_desc = {
 356         /* Avoton has only 59 GPIOs, but we assume the first set of register
 357          * (Core) has 32 instead of 31 to keep gpio-ich compliance
 358          */
 359         .ngpio = 60,
 360         .regs = avoton_regs,
 361         .reglen = avoton_reglen,
 362         .use_outlvl_cache = true,
 363 };
 364
 365 static int ichx_gpio_request_regions(struct device *dev,
 366         struct resource *res_base, const char *name, u8 use_gpio)
 367 {
 368         int i;
 369
 370         if (!res_base || !res_base->start || !res_base->end)
 371                 return -ENODEV;
 372
 373         for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) {
 374                 if (!(use_gpio & BIT(i)))
 375                         continue;
 376                 if (!devm_request_region(dev,
 377                                 res_base->start + ichx_priv.desc->regs[0][i],
 378                                 ichx_priv.desc->reglen[i], name))
 379                         return -EBUSY;
 380         }
 381         return 0;
 382 }
 383
 384 static int ichx_gpio_probe(struct platform_device *pdev)
 385 {
 386         struct device *dev = &pdev->dev;
 387         struct lpc_ich_info *ich_info = dev_get_platdata(dev);
 388         struct resource *res_base, *res_pm;
 389         int err;
 390
 391         if (!ich_info)
 392                 return -ENODEV;
 393
 394         switch (ich_info->gpio_version) {
 395         case ICH_I3100_GPIO:
 396                 ichx_priv.desc = &i3100_desc;
 397                 break;
 398         case ICH_V5_GPIO:
 399                 ichx_priv.desc = &intel5_desc;
 400                 break;
 401         case ICH_V6_GPIO:
 402                 ichx_priv.desc = &ich6_desc;
 403                 break;
 404         case ICH_V7_GPIO:
 405                 ichx_priv.desc = &ich7_desc;
 406                 break;
 407         case ICH_V9_GPIO:
 408                 ichx_priv.desc = &ich9_desc;
 409                 break;
 410         case ICH_V10CORP_GPIO:
 411                 ichx_priv.desc = &ich10_corp_desc;
 412                 break;
 413         case ICH_V10CONS_GPIO:
 414                 ichx_priv.desc = &ich10_cons_desc;
 415                 break;
 416         case AVOTON_GPIO:
 417                 ichx_priv.desc = &avoton_desc;
 418                 break;
 419         default:
 420                 return -ENODEV;
 421         }
 422
 423         ichx_priv.dev = dev;
 424         spin_lock_init(&ichx_priv.lock);
 425
 426         res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO);
 427         err = ichx_gpio_request_regions(dev, res_base, pdev->name,
 428                                         ich_info->use_gpio);
 429         if (err)
 430                 return err;
 431
 432         ichx_priv.gpio_base = res_base;
 433         ichx_priv.use_gpio = ich_info->use_gpio;
 434
 435         /*
 436          * If necessary, determine the I/O address of ACPI/power management
 437          * registers which are needed to read the GPE0 register for GPI pins
 438          * 0 - 15 on some chipsets.
 439          */
 440         if (!ichx_priv.desc->uses_gpe0)
 441                 goto init;
 442
 443         res_pm = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPE0);
 444         if (!res_pm) {
 445                 dev_warn(dev, "ACPI BAR is unavailable, GPI 0 - 15 unavailable\n");
 446                 goto init;
 447         }
 448
 449         if (!devm_request_region(dev, res_pm->start, resource_size(res_pm),
 450                                  pdev->name)) {
 451                 dev_warn(dev, "ACPI BAR is busy, GPI 0 - 15 unavailable\n");
 452                 goto init;
 453         }
 454
 455         ichx_priv.pm_base = res_pm;
 456
 457 init:
 458         ichx_gpiolib_setup(&ichx_priv.chip);
 459         err = gpiochip_add_data(&ichx_priv.chip, NULL);
 460         if (err) {
 461                 dev_err(dev, "Failed to register GPIOs\n");
 462                 return err;
 463         }
 464
 465         dev_info(dev, "GPIO from %d to %d\n", ichx_priv.chip.base,
 466                  ichx_priv.chip.base + ichx_priv.chip.ngpio - 1);
 467
 468         return 0;
 469 }
 470
 471 static int ichx_gpio_remove(struct platform_device *pdev)
 472 {
 473         gpiochip_remove(&ichx_priv.chip);
 474
 475         return 0;
 476 }
 477
 478 static struct platform_driver ichx_gpio_driver = {
 479         .driver         = {
 480                 .name   = DRV_NAME,
 481         },
 482         .probe          = ichx_gpio_probe,
 483         .remove         = ichx_gpio_remove,
 484 };
 485
 486 module_platform_driver(ichx_gpio_driver);
 487
 488 MODULE_AUTHOR("Peter Tyser <ptyser@xes-inc.com>");
 489 MODULE_DESCRIPTION("GPIO interface for Intel ICH series");
 490 MODULE_LICENSE("GPL");
 491 MODULE_ALIAS("platform:"DRV_NAME);