drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
  10         select HDMI
  11         select I2C
  12         select I2C_ALGOBIT
  13         select DMA_SHARED_BUFFER
  14         help
  15           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  16           introduced in XFree86 4.0. If you say Y here, you need to select
  17           the module that's right for your graphics card from the list below.
  18           These modules provide support for synchronization, security, and
  19           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  20           details.  You should also select and configure AGP
  21           (/dev/agpgart) support if it is available for your platform.
  22
  23 config DRM_MIPI_DSI
  24         bool
  25         depends on DRM
  26
  27 config DRM_USB
  28         tristate
  29         depends on DRM
  30         depends on USB_SUPPORT && USB_ARCH_HAS_HCD
  31         select USB
  32
  33 config DRM_KMS_HELPER
  34         tristate
  35         depends on DRM
  36         help
  37           CRTC helpers for KMS drivers.
  38
  39 config DRM_KMS_FB_HELPER
  40         bool
  41         depends on DRM_KMS_HELPER
  42         select FB
  43         select FRAMEBUFFER_CONSOLE if !EXPERT
  44         select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
  45         help
  46           FBDEV helpers for KMS drivers.
  47
  48 config DRM_LOAD_EDID_FIRMWARE
  49         bool "Allow to specify an EDID data set instead of probing for it"
  50         depends on DRM_KMS_HELPER
  51         help
  52           Say Y here, if you want to use EDID data to be loaded from the
  53           /lib/firmware directory or one of the provided built-in
  54           data sets. This may be necessary, if the graphics adapter or
  55           monitor are unable to provide appropriate EDID data. Since this
  56           feature is provided as a workaround for broken hardware, the
  57           default case is N. Details and instructions how to build your own
  58           EDID data are given in Documentation/EDID/HOWTO.txt.
  59
  60 config DRM_TTM
  61         tristate
  62         depends on DRM
  63         help
  64           GPU memory management subsystem for devices with multiple
  65           GPU memory types. Will be enabled automatically if a device driver
  66           uses it.
  67
  68 config DRM_GEM_CMA_HELPER
  69         bool
  70         depends on DRM
  71         help
  72           Choose this if you need the GEM CMA helper functions
  73
  74 config DRM_KMS_CMA_HELPER
  75         bool
  76         select DRM_GEM_CMA_HELPER
  77         select DRM_KMS_FB_HELPER
  78         select FB_SYS_FILLRECT
  79         select FB_SYS_COPYAREA
  80         select FB_SYS_IMAGEBLIT
  81         help
  82           Choose this if you need the KMS CMA helper functions
  83
  84 source "drivers/gpu/drm/i2c/Kconfig"
  85
  86 source "drivers/gpu/drm/bridge/Kconfig"
  87
  88 config DRM_TDFX
  89         tristate "3dfx Banshee/Voodoo3+"
  90         depends on DRM && PCI
  91         help
  92           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
  93           graphics card.  If M is selected, the module will be called tdfx.
  94
  95 config DRM_R128
  96         tristate "ATI Rage 128"
  97         depends on DRM && PCI
  98         select FW_LOADER
  99         help
 100           Choose this option if you have an ATI Rage 128 graphics card.  If M
 101           is selected, the module will be called r128.  AGP support for
 102           this card is strongly suggested (unless you have a PCI version).
 103
 104 config DRM_RADEON
 105         tristate "ATI Radeon"
 106         depends on DRM && PCI
 107         select FB_CFB_FILLRECT
 108         select FB_CFB_COPYAREA
 109         select FB_CFB_IMAGEBLIT
 110         select FW_LOADER
 111         select DRM_KMS_HELPER
 112         select DRM_KMS_FB_HELPER
 113         select DRM_TTM
 114         select POWER_SUPPLY
 115         select HWMON
 116         select BACKLIGHT_CLASS_DEVICE
 117         select INTERVAL_TREE
 118         help
 119           Choose this option if you have an ATI Radeon graphics card.  There
 120           are both PCI and AGP versions.  You don't need to choose this to
 121           run the Radeon in plain VGA mode.
 122
 123           If M is selected, the module will be called radeon.
 124
 125 source "drivers/gpu/drm/radeon/Kconfig"
 126
 127 source "drivers/gpu/drm/nouveau/Kconfig"
 128
 129 config DRM_I810
 130         tristate "Intel I810"
 131         # !PREEMPT because of missing ioctl locking
 132         depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
 133         help
 134           Choose this option if you have an Intel I810 graphics card.  If M is
 135           selected, the module will be called i810.  AGP support is required
 136           for this driver to work.
 137
 138 source "drivers/gpu/drm/i915/Kconfig"
 139
 140 config DRM_MGA
 141         tristate "Matrox g200/g400"
 142         depends on DRM && PCI
 143         select FW_LOADER
 144         help
 145           Choose this option if you have a Matrox G200, G400 or G450 graphics
 146           card.  If M is selected, the module will be called mga.  AGP
 147           support is required for this driver to work.
 148
 149 config DRM_SIS
 150         tristate "SiS video cards"
 151         depends on DRM && AGP
 152         depends on FB_SIS || FB_SIS=n
 153         help
 154           Choose this option if you have a SiS 630 or compatible video
 155           chipset. If M is selected the module will be called sis. AGP
 156           support is required for this driver to work.
 157
 158 config DRM_VIA
 159         tristate "Via unichrome video cards"
 160         depends on DRM && PCI
 161         help
 162           Choose this option if you have a Via unichrome or compatible video
 163           chipset. If M is selected the module will be called via.
 164
 165 config DRM_SAVAGE
 166         tristate "Savage video cards"
 167         depends on DRM && PCI
 168         help
 169           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 170           chipset. If M is selected the module will be called savage.
 171
 172 source "drivers/gpu/drm/exynos/Kconfig"
 173
 174 source "drivers/gpu/drm/vmwgfx/Kconfig"
 175
 176 source "drivers/gpu/drm/gma500/Kconfig"
 177
 178 source "drivers/gpu/drm/udl/Kconfig"
 179
 180 source "drivers/gpu/drm/ast/Kconfig"
 181
 182 source "drivers/gpu/drm/mgag200/Kconfig"
 183
 184 source "drivers/gpu/drm/cirrus/Kconfig"
 185
 186 source "drivers/gpu/drm/armada/Kconfig"
 187
 188 source "drivers/gpu/drm/rcar-du/Kconfig"
 189
 190 source "drivers/gpu/drm/shmobile/Kconfig"
 191
 192 source "drivers/gpu/drm/omapdrm/Kconfig"
 193
 194 source "drivers/gpu/drm/tilcdc/Kconfig"
 195
 196 source "drivers/gpu/drm/qxl/Kconfig"
 197
 198 source "drivers/gpu/drm/bochs/Kconfig"
 199
 200 source "drivers/gpu/drm/msm/Kconfig"
 201
 202 source "drivers/gpu/drm/tegra/Kconfig"
 203
 204 source "drivers/gpu/drm/panel/Kconfig"
 205
 206 source "drivers/gpu/drm/sti/Kconfig"