drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
  10         select HDMI
  11         select I2C
  12         select I2C_ALGOBIT
  13         select DMA_SHARED_BUFFER
  14         help
  15           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  16           introduced in XFree86 4.0. If you say Y here, you need to select
  17           the module that's right for your graphics card from the list below.
  18           These modules provide support for synchronization, security, and
  19           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  20           details.  You should also select and configure AGP
  21           (/dev/agpgart) support if it is available for your platform.
  22
  23 config DRM_MIPI_DSI
  24         bool
  25         depends on DRM
  26
  27 config DRM_USB
  28         tristate
  29         depends on DRM
  30         depends on USB_SUPPORT && USB_ARCH_HAS_HCD
  31         select USB
  32
  33 config DRM_KMS_HELPER
  34         tristate
  35         depends on DRM
  36         help
  37           CRTC helpers for KMS drivers.
  38
  39 config DRM_KMS_FB_HELPER
  40         bool
  41         depends on DRM_KMS_HELPER
  42         select FB
  43         select FRAMEBUFFER_CONSOLE if !EXPERT
  44         select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
  45         help
  46           FBDEV helpers for KMS drivers.
  47
  48 config DRM_LOAD_EDID_FIRMWARE
  49         bool "Allow to specify an EDID data set instead of probing for it"
  50         depends on DRM_KMS_HELPER
  51         help
  52           Say Y here, if you want to use EDID data to be loaded from the
  53           /lib/firmware directory or one of the provided built-in
  54           data sets. This may be necessary, if the graphics adapter or
  55           monitor are unable to provide appropriate EDID data. Since this
  56           feature is provided as a workaround for broken hardware, the
  57           default case is N. Details and instructions how to build your own
  58           EDID data are given in Documentation/EDID/HOWTO.txt.
  59
  60 config DRM_TTM
  61         tristate
  62         depends on DRM
  63         help
  64           GPU memory management subsystem for devices with multiple
  65           GPU memory types. Will be enabled automatically if a device driver
  66           uses it.
  67
  68 config DRM_GEM_CMA_HELPER
  69         bool
  70         depends on DRM
  71         help
  72           Choose this if you need the GEM CMA helper functions
  73
  74 config DRM_KMS_CMA_HELPER
  75         bool
  76         select DRM_GEM_CMA_HELPER
  77         select DRM_KMS_FB_HELPER
  78         select FB_SYS_FILLRECT
  79         select FB_SYS_COPYAREA
  80         select FB_SYS_IMAGEBLIT
  81         help
  82           Choose this if you need the KMS CMA helper functions
  83
  84 source "drivers/gpu/drm/i2c/Kconfig"
  85
  86 source "drivers/gpu/drm/bridge/Kconfig"
  87
  88 config DRM_TDFX
  89         tristate "3dfx Banshee/Voodoo3+"
  90         depends on DRM && PCI
  91         help
  92           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
  93           graphics card.  If M is selected, the module will be called tdfx.
  94
  95 config DRM_R128
  96         tristate "ATI Rage 128"
  97         depends on DRM && PCI
  98         select FW_LOADER
  99         help
 100           Choose this option if you have an ATI Rage 128 graphics card.  If M
 101           is selected, the module will be called r128.  AGP support for
 102           this card is strongly suggested (unless you have a PCI version).
 103
 104 config DRM_RADEON
 105         tristate "ATI Radeon"
 106         depends on DRM && PCI
 107         select FB_CFB_FILLRECT
 108         select FB_CFB_COPYAREA
 109         select FB_CFB_IMAGEBLIT
 110         select FW_LOADER
 111         select DRM_KMS_HELPER
 112         select DRM_KMS_FB_HELPER
 113         select DRM_TTM
 114         select POWER_SUPPLY
 115         select HWMON
 116         select BACKLIGHT_CLASS_DEVICE
 117         help
 118           Choose this option if you have an ATI Radeon graphics card.  There
 119           are both PCI and AGP versions.  You don't need to choose this to
 120           run the Radeon in plain VGA mode.
 121
 122           If M is selected, the module will be called radeon.
 123
 124 source "drivers/gpu/drm/radeon/Kconfig"
 125
 126 source "drivers/gpu/drm/nouveau/Kconfig"
 127
 128 config DRM_I810
 129         tristate "Intel I810"
 130         # !PREEMPT because of missing ioctl locking
 131         depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
 132         help
 133           Choose this option if you have an Intel I810 graphics card.  If M is
 134           selected, the module will be called i810.  AGP support is required
 135           for this driver to work.
 136
 137 source "drivers/gpu/drm/i915/Kconfig"
 138
 139 config DRM_MGA
 140         tristate "Matrox g200/g400"
 141         depends on DRM && PCI
 142         select FW_LOADER
 143         help
 144           Choose this option if you have a Matrox G200, G400 or G450 graphics
 145           card.  If M is selected, the module will be called mga.  AGP
 146           support is required for this driver to work.
 147
 148 config DRM_SIS
 149         tristate "SiS video cards"
 150         depends on DRM && AGP
 151         depends on FB_SIS || FB_SIS=n
 152         help
 153           Choose this option if you have a SiS 630 or compatible video
 154           chipset. If M is selected the module will be called sis. AGP
 155           support is required for this driver to work.
 156
 157 config DRM_VIA
 158         tristate "Via unichrome video cards"
 159         depends on DRM && PCI
 160         help
 161           Choose this option if you have a Via unichrome or compatible video
 162           chipset. If M is selected the module will be called via.
 163
 164 config DRM_SAVAGE
 165         tristate "Savage video cards"
 166         depends on DRM && PCI
 167         help
 168           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 169           chipset. If M is selected the module will be called savage.
 170
 171 source "drivers/gpu/drm/exynos/Kconfig"
 172
 173 source "drivers/gpu/drm/vmwgfx/Kconfig"
 174
 175 source "drivers/gpu/drm/gma500/Kconfig"
 176
 177 source "drivers/gpu/drm/udl/Kconfig"
 178
 179 source "drivers/gpu/drm/ast/Kconfig"
 180
 181 source "drivers/gpu/drm/mgag200/Kconfig"
 182
 183 source "drivers/gpu/drm/cirrus/Kconfig"
 184
 185 source "drivers/gpu/drm/armada/Kconfig"
 186
 187 source "drivers/gpu/drm/rcar-du/Kconfig"
 188
 189 source "drivers/gpu/drm/shmobile/Kconfig"
 190
 191 source "drivers/gpu/drm/omapdrm/Kconfig"
 192
 193 source "drivers/gpu/drm/tilcdc/Kconfig"
 194
 195 source "drivers/gpu/drm/qxl/Kconfig"
 196
 197 source "drivers/gpu/drm/bochs/Kconfig"
 198
 199 source "drivers/gpu/drm/msm/Kconfig"
 200
 201 source "drivers/gpu/drm/tegra/Kconfig"
 202
 203 source "drivers/gpu/drm/panel/Kconfig"