2 * (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
3 * Author: Liviu Dudau <Liviu.Dudau@arm.com>
5 * This program is free software and is provided to you under the terms of the
6 * GNU General Public License version 2 as published by the Free Software
7 * Foundation, and any use by you of this program is subject to the terms
10 * ARM Mali DP500/DP550/DP650 driver (crtc operations)
14 #include <drm/drm_atomic.h>
15 #include <drm/drm_atomic_helper.h>
16 #include <drm/drm_crtc.h>
17 #include <drm/drm_crtc_helper.h>
18 #include <linux/clk.h>
19 #include <linux/pm_runtime.h>
20 #include <video/videomode.h>
22 #include "malidp_drv.h"
23 #include "malidp_hw.h"
25 static enum drm_mode_status
malidp_crtc_mode_valid(struct drm_crtc
*crtc
,
26 const struct drm_display_mode
*mode
)
28 struct malidp_drm
*malidp
= crtc_to_malidp_device(crtc
);
29 struct malidp_hw_device
*hwdev
= malidp
->dev
;
32 * check that the hardware can drive the required clock rate,
33 * but skip the check if the clock is meant to be disabled (req_rate = 0)
35 long rate
, req_rate
= mode
->crtc_clock
* 1000;
38 rate
= clk_round_rate(hwdev
->pxlclk
, req_rate
);
39 if (rate
!= req_rate
) {
40 DRM_DEBUG_DRIVER("pxlclk doesn't support %ld Hz\n",
49 static void malidp_crtc_atomic_enable(struct drm_crtc
*crtc
,
50 struct drm_crtc_state
*old_state
)
52 struct malidp_drm
*malidp
= crtc_to_malidp_device(crtc
);
53 struct malidp_hw_device
*hwdev
= malidp
->dev
;
55 int err
= pm_runtime_get_sync(crtc
->dev
->dev
);
58 DRM_DEBUG_DRIVER("Failed to enable runtime power management: %d\n", err
);
62 drm_display_mode_to_videomode(&crtc
->state
->adjusted_mode
, &vm
);
63 clk_prepare_enable(hwdev
->pxlclk
);
65 /* We rely on firmware to set mclk to a sensible level. */
66 clk_set_rate(hwdev
->pxlclk
, crtc
->state
->adjusted_mode
.crtc_clock
* 1000);
68 hwdev
->hw
->modeset(hwdev
, &vm
);
69 hwdev
->hw
->leave_config_mode(hwdev
);
70 drm_crtc_vblank_on(crtc
);
73 static void malidp_crtc_atomic_disable(struct drm_crtc
*crtc
,
74 struct drm_crtc_state
*old_state
)
76 struct malidp_drm
*malidp
= crtc_to_malidp_device(crtc
);
77 struct malidp_hw_device
*hwdev
= malidp
->dev
;
80 /* always disable planes on the CRTC that is being turned off */
81 drm_atomic_helper_disable_planes_on_crtc(old_state
, false);
83 drm_crtc_vblank_off(crtc
);
84 hwdev
->hw
->enter_config_mode(hwdev
);
86 clk_disable_unprepare(hwdev
->pxlclk
);
88 err
= pm_runtime_put(crtc
->dev
->dev
);
90 DRM_DEBUG_DRIVER("Failed to disable runtime power management: %d\n", err
);
94 static const struct gamma_curve_segment
{
97 } segments
[MALIDP_COEFFTAB_NUM_COEFFS
] = {
99 { 0, 0 }, { 1, 1 }, { 2, 2 }, { 3, 3 },
100 { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 },
101 { 8, 8 }, { 9, 9 }, { 10, 10 }, { 11, 11 },
102 { 12, 12 }, { 13, 13 }, { 14, 14 }, { 15, 15 },
104 { 16, 19 }, { 20, 23 }, { 24, 27 }, { 28, 31 },
106 { 32, 39 }, { 40, 47 }, { 48, 55 }, { 56, 63 },
108 { 64, 79 }, { 80, 95 }, { 96, 111 }, { 112, 127 },
110 { 128, 159 }, { 160, 191 }, { 192, 223 }, { 224, 255 },
112 { 256, 319 }, { 320, 383 }, { 384, 447 }, { 448, 511 },
114 { 512, 639 }, { 640, 767 }, { 768, 895 }, { 896, 1023 },
115 { 1024, 1151 }, { 1152, 1279 }, { 1280, 1407 }, { 1408, 1535 },
116 { 1536, 1663 }, { 1664, 1791 }, { 1792, 1919 }, { 1920, 2047 },
117 { 2048, 2175 }, { 2176, 2303 }, { 2304, 2431 }, { 2432, 2559 },
118 { 2560, 2687 }, { 2688, 2815 }, { 2816, 2943 }, { 2944, 3071 },
119 { 3072, 3199 }, { 3200, 3327 }, { 3328, 3455 }, { 3456, 3583 },
120 { 3584, 3711 }, { 3712, 3839 }, { 3840, 3967 }, { 3968, 4095 },
123 #define DE_COEFTAB_DATA(a, b) ((((a) & 0xfff) << 16) | (((b) & 0xfff)))
125 static void malidp_generate_gamma_table(struct drm_property_blob
*lut_blob
,
126 u32 coeffs
[MALIDP_COEFFTAB_NUM_COEFFS
])
128 struct drm_color_lut
*lut
= (struct drm_color_lut
*)lut_blob
->data
;
131 for (i
= 0; i
< MALIDP_COEFFTAB_NUM_COEFFS
; ++i
) {
132 u32 a
, b
, delta_in
, out_start
, out_end
;
134 delta_in
= segments
[i
].end
- segments
[i
].start
;
135 /* DP has 12-bit internal precision for its LUTs. */
136 out_start
= drm_color_lut_extract(lut
[segments
[i
].start
].green
,
138 out_end
= drm_color_lut_extract(lut
[segments
[i
].end
].green
, 12);
139 a
= (delta_in
== 0) ? 0 : ((out_end
- out_start
) * 256) / delta_in
;
141 coeffs
[i
] = DE_COEFTAB_DATA(a
, b
);
146 * Check if there is a new gamma LUT and if it is of an acceptable size. Also,
147 * reject any LUTs that use distinct red, green, and blue curves.
149 static int malidp_crtc_atomic_check_gamma(struct drm_crtc
*crtc
,
150 struct drm_crtc_state
*state
)
152 struct malidp_crtc_state
*mc
= to_malidp_crtc_state(state
);
153 struct drm_color_lut
*lut
;
157 if (!state
->color_mgmt_changed
|| !state
->gamma_lut
)
160 if (crtc
->state
->gamma_lut
&&
161 (crtc
->state
->gamma_lut
->base
.id
== state
->gamma_lut
->base
.id
))
164 if (state
->gamma_lut
->length
% sizeof(struct drm_color_lut
))
167 lut_size
= state
->gamma_lut
->length
/ sizeof(struct drm_color_lut
);
168 if (lut_size
!= MALIDP_GAMMA_LUT_SIZE
)
171 lut
= (struct drm_color_lut
*)state
->gamma_lut
->data
;
172 for (i
= 0; i
< lut_size
; ++i
)
173 if (!((lut
[i
].red
== lut
[i
].green
) &&
174 (lut
[i
].red
== lut
[i
].blue
)))
177 if (!state
->mode_changed
) {
180 state
->mode_changed
= true;
182 * Kerneldoc for drm_atomic_helper_check_modeset mandates that
183 * it be invoked when the driver sets ->mode_changed. Since
184 * changing the gamma LUT doesn't depend on any external
185 * resources, it is safe to call it only once.
187 ret
= drm_atomic_helper_check_modeset(crtc
->dev
, state
->state
);
192 malidp_generate_gamma_table(state
->gamma_lut
, mc
->gamma_coeffs
);
197 * Check if there is a new CTM and if it contains valid input. Valid here means
198 * that the number is inside the representable range for a Q3.12 number,
199 * excluding truncating the fractional part of the input data.
201 * The COLORADJ registers can be changed atomically.
203 static int malidp_crtc_atomic_check_ctm(struct drm_crtc
*crtc
,
204 struct drm_crtc_state
*state
)
206 struct malidp_crtc_state
*mc
= to_malidp_crtc_state(state
);
207 struct drm_color_ctm
*ctm
;
210 if (!state
->color_mgmt_changed
)
216 if (crtc
->state
->ctm
&& (crtc
->state
->ctm
->base
.id
==
217 state
->ctm
->base
.id
))
221 * The size of the ctm is checked in
222 * drm_atomic_replace_property_blob_from_id.
224 ctm
= (struct drm_color_ctm
*)state
->ctm
->data
;
225 for (i
= 0; i
< ARRAY_SIZE(ctm
->matrix
); ++i
) {
226 /* Convert from S31.32 to Q3.12. */
227 s64 val
= ctm
->matrix
[i
];
228 u32 mag
= ((((u64
)val
) & ~BIT_ULL(63)) >> 20) &
232 * Convert to 2s complement and check the destination's top bit
233 * for overflow. NB: Can't check before converting or it'd
234 * incorrectly reject the case:
238 if (val
& BIT_ULL(63))
240 if (!!(val
& BIT_ULL(63)) != !!(mag
& BIT(14)))
242 mc
->coloradj_coeffs
[i
] = mag
;
248 static int malidp_crtc_atomic_check_scaling(struct drm_crtc
*crtc
,
249 struct drm_crtc_state
*state
)
251 struct malidp_drm
*malidp
= crtc_to_malidp_device(crtc
);
252 struct malidp_hw_device
*hwdev
= malidp
->dev
;
253 struct malidp_crtc_state
*cs
= to_malidp_crtc_state(state
);
254 struct malidp_se_config
*s
= &cs
->scaler_config
;
255 struct drm_plane
*plane
;
257 const struct drm_plane_state
*pstate
;
258 u32 h_upscale_factor
= 0; /* U16.16 */
259 u32 v_upscale_factor
= 0; /* U16.16 */
260 u8 scaling
= cs
->scaled_planes_mask
;
264 s
->scale_enable
= false;
268 /* The scaling engine can only handle one plane at a time. */
269 if (scaling
& (scaling
- 1))
272 drm_atomic_crtc_state_for_each_plane_state(plane
, pstate
, state
) {
273 struct malidp_plane
*mp
= to_malidp_plane(plane
);
276 if (!(mp
->layer
->id
& scaling
))
280 * Convert crtc_[w|h] to U32.32, then divide by U16.16 src_[w|h]
281 * to get the U16.16 result.
283 h_upscale_factor
= div_u64((u64
)pstate
->crtc_w
<< 32,
285 v_upscale_factor
= div_u64((u64
)pstate
->crtc_h
<< 32,
288 s
->enhancer_enable
= ((h_upscale_factor
>> 16) >= 2 ||
289 (v_upscale_factor
>> 16) >= 2);
291 s
->input_w
= pstate
->src_w
>> 16;
292 s
->input_h
= pstate
->src_h
>> 16;
293 s
->output_w
= pstate
->crtc_w
;
294 s
->output_h
= pstate
->crtc_h
;
297 #define SE_SHIFT_N_PHASE 12
298 /* Calculate initial_phase and delta_phase for horizontal. */
301 ((phase
<< SE_N_PHASE
) / s
->output_w
+ 1) / 2;
304 phase
<<= (SE_SHIFT_N_PHASE
+ SE_N_PHASE
);
305 s
->h_delta_phase
= phase
/ s
->output_w
;
307 /* Same for vertical. */
310 ((phase
<< SE_N_PHASE
) / s
->output_h
+ 1) / 2;
313 phase
<<= (SE_SHIFT_N_PHASE
+ SE_N_PHASE
);
314 s
->v_delta_phase
= phase
/ s
->output_h
;
316 #undef SE_SHIFT_N_PHASE
317 s
->plane_src_id
= mp
->layer
->id
;
320 s
->scale_enable
= true;
321 s
->hcoeff
= malidp_se_select_coeffs(h_upscale_factor
);
322 s
->vcoeff
= malidp_se_select_coeffs(v_upscale_factor
);
325 drm_display_mode_to_videomode(&state
->adjusted_mode
, &vm
);
326 ret
= hwdev
->hw
->se_calc_mclk(hwdev
, s
, &vm
);
332 static int malidp_crtc_atomic_check(struct drm_crtc
*crtc
,
333 struct drm_crtc_state
*state
)
335 struct malidp_drm
*malidp
= crtc_to_malidp_device(crtc
);
336 struct malidp_hw_device
*hwdev
= malidp
->dev
;
337 struct drm_plane
*plane
;
338 const struct drm_plane_state
*pstate
;
339 u32 rot_mem_free
, rot_mem_usable
;
340 int rotated_planes
= 0;
344 * check if there is enough rotation memory available for planes
345 * that need 90° and 270° rotation. Each plane has set its required
346 * memory size in the ->plane_check() callback, here we only make
347 * sure that the sums are less that the total usable memory.
349 * The rotation memory allocation algorithm (for each plane):
350 * a. If no more rotated planes exist, all remaining rotate
351 * memory in the bank is available for use by the plane.
352 * b. If other rotated planes exist, and plane's layer ID is
353 * DE_VIDEO1, it can use all the memory from first bank if
354 * secondary rotation memory bank is available, otherwise it can
355 * use up to half the bank's memory.
356 * c. If other rotated planes exist, and plane's layer ID is not
357 * DE_VIDEO1, it can use half of the available memory
359 * Note: this algorithm assumes that the order in which the planes are
360 * checked always has DE_VIDEO1 plane first in the list if it is
361 * rotated. Because that is how we create the planes in the first
362 * place, under current DRM version things work, but if ever the order
363 * in which drm_atomic_crtc_state_for_each_plane() iterates over planes
364 * changes, we need to pre-sort the planes before validation.
367 /* first count the number of rotated planes */
368 drm_atomic_crtc_state_for_each_plane_state(plane
, pstate
, state
) {
369 if (pstate
->rotation
& MALIDP_ROTATED_MASK
)
373 rot_mem_free
= hwdev
->rotation_memory
[0];
375 * if we have more than 1 plane using rotation memory, use the second
376 * block of rotation memory as well
378 if (rotated_planes
> 1)
379 rot_mem_free
+= hwdev
->rotation_memory
[1];
381 /* now validate the rotation memory requirements */
382 drm_atomic_crtc_state_for_each_plane_state(plane
, pstate
, state
) {
383 struct malidp_plane
*mp
= to_malidp_plane(plane
);
384 struct malidp_plane_state
*ms
= to_malidp_plane_state(pstate
);
386 if (pstate
->rotation
& MALIDP_ROTATED_MASK
) {
387 /* process current plane */
390 if (!rotated_planes
) {
391 /* no more rotated planes, we can use what's left */
392 rot_mem_usable
= rot_mem_free
;
394 if ((mp
->layer
->id
!= DE_VIDEO1
) ||
395 (hwdev
->rotation_memory
[1] == 0))
396 rot_mem_usable
= rot_mem_free
/ 2;
398 rot_mem_usable
= hwdev
->rotation_memory
[0];
401 rot_mem_free
-= rot_mem_usable
;
403 if (ms
->rotmem_size
> rot_mem_usable
)
408 ret
= malidp_crtc_atomic_check_gamma(crtc
, state
);
409 ret
= ret
? ret
: malidp_crtc_atomic_check_ctm(crtc
, state
);
410 ret
= ret
? ret
: malidp_crtc_atomic_check_scaling(crtc
, state
);
415 static const struct drm_crtc_helper_funcs malidp_crtc_helper_funcs
= {
416 .mode_valid
= malidp_crtc_mode_valid
,
417 .atomic_check
= malidp_crtc_atomic_check
,
418 .atomic_enable
= malidp_crtc_atomic_enable
,
419 .atomic_disable
= malidp_crtc_atomic_disable
,
422 static struct drm_crtc_state
*malidp_crtc_duplicate_state(struct drm_crtc
*crtc
)
424 struct malidp_crtc_state
*state
, *old_state
;
426 if (WARN_ON(!crtc
->state
))
429 old_state
= to_malidp_crtc_state(crtc
->state
);
430 state
= kmalloc(sizeof(*state
), GFP_KERNEL
);
434 __drm_atomic_helper_crtc_duplicate_state(crtc
, &state
->base
);
435 memcpy(state
->gamma_coeffs
, old_state
->gamma_coeffs
,
436 sizeof(state
->gamma_coeffs
));
437 memcpy(state
->coloradj_coeffs
, old_state
->coloradj_coeffs
,
438 sizeof(state
->coloradj_coeffs
));
439 memcpy(&state
->scaler_config
, &old_state
->scaler_config
,
440 sizeof(state
->scaler_config
));
441 state
->scaled_planes_mask
= 0;
446 static void malidp_crtc_reset(struct drm_crtc
*crtc
)
448 struct malidp_crtc_state
*state
= NULL
;
451 state
= to_malidp_crtc_state(crtc
->state
);
452 __drm_atomic_helper_crtc_destroy_state(crtc
->state
);
456 state
= kzalloc(sizeof(*state
), GFP_KERNEL
);
458 crtc
->state
= &state
->base
;
459 crtc
->state
->crtc
= crtc
;
463 static void malidp_crtc_destroy_state(struct drm_crtc
*crtc
,
464 struct drm_crtc_state
*state
)
466 struct malidp_crtc_state
*mali_state
= NULL
;
469 mali_state
= to_malidp_crtc_state(state
);
470 __drm_atomic_helper_crtc_destroy_state(state
);
476 static int malidp_crtc_enable_vblank(struct drm_crtc
*crtc
)
478 struct malidp_drm
*malidp
= crtc_to_malidp_device(crtc
);
479 struct malidp_hw_device
*hwdev
= malidp
->dev
;
481 malidp_hw_enable_irq(hwdev
, MALIDP_DE_BLOCK
,
482 hwdev
->hw
->map
.de_irq_map
.vsync_irq
);
486 static void malidp_crtc_disable_vblank(struct drm_crtc
*crtc
)
488 struct malidp_drm
*malidp
= crtc_to_malidp_device(crtc
);
489 struct malidp_hw_device
*hwdev
= malidp
->dev
;
491 malidp_hw_disable_irq(hwdev
, MALIDP_DE_BLOCK
,
492 hwdev
->hw
->map
.de_irq_map
.vsync_irq
);
495 static const struct drm_crtc_funcs malidp_crtc_funcs
= {
496 .gamma_set
= drm_atomic_helper_legacy_gamma_set
,
497 .destroy
= drm_crtc_cleanup
,
498 .set_config
= drm_atomic_helper_set_config
,
499 .page_flip
= drm_atomic_helper_page_flip
,
500 .reset
= malidp_crtc_reset
,
501 .atomic_duplicate_state
= malidp_crtc_duplicate_state
,
502 .atomic_destroy_state
= malidp_crtc_destroy_state
,
503 .enable_vblank
= malidp_crtc_enable_vblank
,
504 .disable_vblank
= malidp_crtc_disable_vblank
,
507 int malidp_crtc_init(struct drm_device
*drm
)
509 struct malidp_drm
*malidp
= drm
->dev_private
;
510 struct drm_plane
*primary
= NULL
, *plane
;
513 ret
= malidp_de_planes_init(drm
);
515 DRM_ERROR("Failed to initialise planes\n");
519 drm_for_each_plane(plane
, drm
) {
520 if (plane
->type
== DRM_PLANE_TYPE_PRIMARY
) {
527 DRM_ERROR("no primary plane found\n");
529 goto crtc_cleanup_planes
;
532 ret
= drm_crtc_init_with_planes(drm
, &malidp
->crtc
, primary
, NULL
,
533 &malidp_crtc_funcs
, NULL
);
535 goto crtc_cleanup_planes
;
537 drm_crtc_helper_add(&malidp
->crtc
, &malidp_crtc_helper_funcs
);
538 drm_mode_crtc_set_gamma_size(&malidp
->crtc
, MALIDP_GAMMA_LUT_SIZE
);
539 /* No inverse-gamma: it is per-plane. */
540 drm_crtc_enable_color_mgmt(&malidp
->crtc
, 0, true, MALIDP_GAMMA_LUT_SIZE
);
542 malidp_se_set_enh_coeffs(malidp
->dev
);
547 malidp_de_planes_destroy(drm
);