1 /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
5 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
8 * Permission is hereby granted, free of charge, to any person obtaining a
9 * copy of this software and associated documentation files (the
10 * "Software"), to deal in the Software without restriction, including
11 * without limitation the rights to use, copy, modify, merge, publish,
12 * distribute, sub license, and/or sell copies of the Software, and to
13 * permit persons to whom the Software is furnished to do so, subject to
14 * the following conditions:
16 * The above copyright notice and this permission notice (including the
17 * next paragraph) shall be included in all copies or substantial portions
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
21 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
23 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
24 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
30 #include <linux/device.h>
31 #include <linux/acpi.h>
33 #include <drm/i915_drm.h>
35 #include "i915_trace.h"
36 #include "intel_drv.h"
38 #include <linux/console.h>
39 #include <linux/module.h>
40 #include <linux/pm_runtime.h>
41 #include <drm/drm_crtc_helper.h>
43 static struct drm_driver driver
;
45 #define GEN_DEFAULT_PIPEOFFSETS \
46 .pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
47 PIPE_C_OFFSET, PIPE_EDP_OFFSET }, \
48 .trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
49 TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET }, \
50 .palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET }
52 #define GEN_CHV_PIPEOFFSETS \
53 .pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
54 CHV_PIPE_C_OFFSET }, \
55 .trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
56 CHV_TRANSCODER_C_OFFSET, }, \
57 .palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET, \
58 CHV_PALETTE_C_OFFSET }
60 #define CURSOR_OFFSETS \
61 .cursor_offsets = { CURSOR_A_OFFSET, CURSOR_B_OFFSET, CHV_CURSOR_C_OFFSET }
63 #define IVB_CURSOR_OFFSETS \
64 .cursor_offsets = { CURSOR_A_OFFSET, IVB_CURSOR_B_OFFSET, IVB_CURSOR_C_OFFSET }
66 static const struct intel_device_info intel_i830_info
= {
67 .gen
= 2, .is_mobile
= 1, .cursor_needs_physical
= 1, .num_pipes
= 2,
68 .has_overlay
= 1, .overlay_needs_physical
= 1,
69 .ring_mask
= RENDER_RING
,
70 GEN_DEFAULT_PIPEOFFSETS
,
74 static const struct intel_device_info intel_845g_info
= {
75 .gen
= 2, .num_pipes
= 1,
76 .has_overlay
= 1, .overlay_needs_physical
= 1,
77 .ring_mask
= RENDER_RING
,
78 GEN_DEFAULT_PIPEOFFSETS
,
82 static const struct intel_device_info intel_i85x_info
= {
83 .gen
= 2, .is_i85x
= 1, .is_mobile
= 1, .num_pipes
= 2,
84 .cursor_needs_physical
= 1,
85 .has_overlay
= 1, .overlay_needs_physical
= 1,
87 .ring_mask
= RENDER_RING
,
88 GEN_DEFAULT_PIPEOFFSETS
,
92 static const struct intel_device_info intel_i865g_info
= {
93 .gen
= 2, .num_pipes
= 1,
94 .has_overlay
= 1, .overlay_needs_physical
= 1,
95 .ring_mask
= RENDER_RING
,
96 GEN_DEFAULT_PIPEOFFSETS
,
100 static const struct intel_device_info intel_i915g_info
= {
101 .gen
= 3, .is_i915g
= 1, .cursor_needs_physical
= 1, .num_pipes
= 2,
102 .has_overlay
= 1, .overlay_needs_physical
= 1,
103 .ring_mask
= RENDER_RING
,
104 GEN_DEFAULT_PIPEOFFSETS
,
107 static const struct intel_device_info intel_i915gm_info
= {
108 .gen
= 3, .is_mobile
= 1, .num_pipes
= 2,
109 .cursor_needs_physical
= 1,
110 .has_overlay
= 1, .overlay_needs_physical
= 1,
113 .ring_mask
= RENDER_RING
,
114 GEN_DEFAULT_PIPEOFFSETS
,
117 static const struct intel_device_info intel_i945g_info
= {
118 .gen
= 3, .has_hotplug
= 1, .cursor_needs_physical
= 1, .num_pipes
= 2,
119 .has_overlay
= 1, .overlay_needs_physical
= 1,
120 .ring_mask
= RENDER_RING
,
121 GEN_DEFAULT_PIPEOFFSETS
,
124 static const struct intel_device_info intel_i945gm_info
= {
125 .gen
= 3, .is_i945gm
= 1, .is_mobile
= 1, .num_pipes
= 2,
126 .has_hotplug
= 1, .cursor_needs_physical
= 1,
127 .has_overlay
= 1, .overlay_needs_physical
= 1,
130 .ring_mask
= RENDER_RING
,
131 GEN_DEFAULT_PIPEOFFSETS
,
135 static const struct intel_device_info intel_i965g_info
= {
136 .gen
= 4, .is_broadwater
= 1, .num_pipes
= 2,
139 .ring_mask
= RENDER_RING
,
140 GEN_DEFAULT_PIPEOFFSETS
,
144 static const struct intel_device_info intel_i965gm_info
= {
145 .gen
= 4, .is_crestline
= 1, .num_pipes
= 2,
146 .is_mobile
= 1, .has_fbc
= 1, .has_hotplug
= 1,
149 .ring_mask
= RENDER_RING
,
150 GEN_DEFAULT_PIPEOFFSETS
,
154 static const struct intel_device_info intel_g33_info
= {
155 .gen
= 3, .is_g33
= 1, .num_pipes
= 2,
156 .need_gfx_hws
= 1, .has_hotplug
= 1,
158 .ring_mask
= RENDER_RING
,
159 GEN_DEFAULT_PIPEOFFSETS
,
163 static const struct intel_device_info intel_g45_info
= {
164 .gen
= 4, .is_g4x
= 1, .need_gfx_hws
= 1, .num_pipes
= 2,
165 .has_pipe_cxsr
= 1, .has_hotplug
= 1,
166 .ring_mask
= RENDER_RING
| BSD_RING
,
167 GEN_DEFAULT_PIPEOFFSETS
,
171 static const struct intel_device_info intel_gm45_info
= {
172 .gen
= 4, .is_g4x
= 1, .num_pipes
= 2,
173 .is_mobile
= 1, .need_gfx_hws
= 1, .has_fbc
= 1,
174 .has_pipe_cxsr
= 1, .has_hotplug
= 1,
176 .ring_mask
= RENDER_RING
| BSD_RING
,
177 GEN_DEFAULT_PIPEOFFSETS
,
181 static const struct intel_device_info intel_pineview_info
= {
182 .gen
= 3, .is_g33
= 1, .is_pineview
= 1, .is_mobile
= 1, .num_pipes
= 2,
183 .need_gfx_hws
= 1, .has_hotplug
= 1,
185 GEN_DEFAULT_PIPEOFFSETS
,
189 static const struct intel_device_info intel_ironlake_d_info
= {
190 .gen
= 5, .num_pipes
= 2,
191 .need_gfx_hws
= 1, .has_hotplug
= 1,
192 .ring_mask
= RENDER_RING
| BSD_RING
,
193 GEN_DEFAULT_PIPEOFFSETS
,
197 static const struct intel_device_info intel_ironlake_m_info
= {
198 .gen
= 5, .is_mobile
= 1, .num_pipes
= 2,
199 .need_gfx_hws
= 1, .has_hotplug
= 1,
201 .ring_mask
= RENDER_RING
| BSD_RING
,
202 GEN_DEFAULT_PIPEOFFSETS
,
206 static const struct intel_device_info intel_sandybridge_d_info
= {
207 .gen
= 6, .num_pipes
= 2,
208 .need_gfx_hws
= 1, .has_hotplug
= 1,
210 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
,
212 GEN_DEFAULT_PIPEOFFSETS
,
216 static const struct intel_device_info intel_sandybridge_m_info
= {
217 .gen
= 6, .is_mobile
= 1, .num_pipes
= 2,
218 .need_gfx_hws
= 1, .has_hotplug
= 1,
220 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
,
222 GEN_DEFAULT_PIPEOFFSETS
,
226 #define GEN7_FEATURES \
227 .gen = 7, .num_pipes = 3, \
228 .need_gfx_hws = 1, .has_hotplug = 1, \
230 .ring_mask = RENDER_RING | BSD_RING | BLT_RING, \
233 static const struct intel_device_info intel_ivybridge_d_info
= {
236 GEN_DEFAULT_PIPEOFFSETS
,
240 static const struct intel_device_info intel_ivybridge_m_info
= {
244 GEN_DEFAULT_PIPEOFFSETS
,
248 static const struct intel_device_info intel_ivybridge_q_info
= {
251 .num_pipes
= 0, /* legal, last one wins */
252 GEN_DEFAULT_PIPEOFFSETS
,
256 static const struct intel_device_info intel_valleyview_m_info
= {
261 .display_mmio_offset
= VLV_DISPLAY_BASE
,
262 .has_fbc
= 0, /* legal, last one wins */
263 .has_llc
= 0, /* legal, last one wins */
264 GEN_DEFAULT_PIPEOFFSETS
,
268 static const struct intel_device_info intel_valleyview_d_info
= {
272 .display_mmio_offset
= VLV_DISPLAY_BASE
,
273 .has_fbc
= 0, /* legal, last one wins */
274 .has_llc
= 0, /* legal, last one wins */
275 GEN_DEFAULT_PIPEOFFSETS
,
279 static const struct intel_device_info intel_haswell_d_info
= {
284 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
285 GEN_DEFAULT_PIPEOFFSETS
,
289 static const struct intel_device_info intel_haswell_m_info
= {
295 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
296 GEN_DEFAULT_PIPEOFFSETS
,
300 static const struct intel_device_info intel_broadwell_d_info
= {
301 .gen
= 8, .num_pipes
= 3,
302 .need_gfx_hws
= 1, .has_hotplug
= 1,
303 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
308 GEN_DEFAULT_PIPEOFFSETS
,
312 static const struct intel_device_info intel_broadwell_m_info
= {
313 .gen
= 8, .is_mobile
= 1, .num_pipes
= 3,
314 .need_gfx_hws
= 1, .has_hotplug
= 1,
315 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
320 GEN_DEFAULT_PIPEOFFSETS
,
324 static const struct intel_device_info intel_broadwell_gt3d_info
= {
325 .gen
= 8, .num_pipes
= 3,
326 .need_gfx_hws
= 1, .has_hotplug
= 1,
327 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
| BSD2_RING
,
332 GEN_DEFAULT_PIPEOFFSETS
,
336 static const struct intel_device_info intel_broadwell_gt3m_info
= {
337 .gen
= 8, .is_mobile
= 1, .num_pipes
= 3,
338 .need_gfx_hws
= 1, .has_hotplug
= 1,
339 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
| BSD2_RING
,
344 GEN_DEFAULT_PIPEOFFSETS
,
348 static const struct intel_device_info intel_cherryview_info
= {
349 .gen
= 8, .num_pipes
= 3,
350 .need_gfx_hws
= 1, .has_hotplug
= 1,
351 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
353 .display_mmio_offset
= VLV_DISPLAY_BASE
,
358 static const struct intel_device_info intel_skylake_info
= {
360 .gen
= 9, .num_pipes
= 3,
361 .need_gfx_hws
= 1, .has_hotplug
= 1,
362 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
367 GEN_DEFAULT_PIPEOFFSETS
,
371 static const struct intel_device_info intel_skylake_gt3_info
= {
373 .gen
= 9, .num_pipes
= 3,
374 .need_gfx_hws
= 1, .has_hotplug
= 1,
375 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
| BSD2_RING
,
380 GEN_DEFAULT_PIPEOFFSETS
,
384 static const struct intel_device_info intel_broxton_info
= {
388 .need_gfx_hws
= 1, .has_hotplug
= 1,
389 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
394 GEN_DEFAULT_PIPEOFFSETS
,
398 static const struct intel_device_info intel_kabylake_info
= {
403 .need_gfx_hws
= 1, .has_hotplug
= 1,
404 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
409 GEN_DEFAULT_PIPEOFFSETS
,
413 static const struct intel_device_info intel_kabylake_gt3_info
= {
418 .need_gfx_hws
= 1, .has_hotplug
= 1,
419 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
| BSD2_RING
,
424 GEN_DEFAULT_PIPEOFFSETS
,
429 * Make sure any device matches here are from most specific to most
430 * general. For example, since the Quanta match is based on the subsystem
431 * and subvendor IDs, we need it to come before the more general IVB
432 * PCI ID matches, otherwise we'll use the wrong info struct above.
434 static const struct pci_device_id pciidlist
[] = {
435 INTEL_I830_IDS(&intel_i830_info
),
436 INTEL_I845G_IDS(&intel_845g_info
),
437 INTEL_I85X_IDS(&intel_i85x_info
),
438 INTEL_I865G_IDS(&intel_i865g_info
),
439 INTEL_I915G_IDS(&intel_i915g_info
),
440 INTEL_I915GM_IDS(&intel_i915gm_info
),
441 INTEL_I945G_IDS(&intel_i945g_info
),
442 INTEL_I945GM_IDS(&intel_i945gm_info
),
443 INTEL_I965G_IDS(&intel_i965g_info
),
444 INTEL_G33_IDS(&intel_g33_info
),
445 INTEL_I965GM_IDS(&intel_i965gm_info
),
446 INTEL_GM45_IDS(&intel_gm45_info
),
447 INTEL_G45_IDS(&intel_g45_info
),
448 INTEL_PINEVIEW_IDS(&intel_pineview_info
),
449 INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info
),
450 INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info
),
451 INTEL_SNB_D_IDS(&intel_sandybridge_d_info
),
452 INTEL_SNB_M_IDS(&intel_sandybridge_m_info
),
453 INTEL_IVB_Q_IDS(&intel_ivybridge_q_info
), /* must be first IVB */
454 INTEL_IVB_M_IDS(&intel_ivybridge_m_info
),
455 INTEL_IVB_D_IDS(&intel_ivybridge_d_info
),
456 INTEL_HSW_D_IDS(&intel_haswell_d_info
),
457 INTEL_HSW_M_IDS(&intel_haswell_m_info
),
458 INTEL_VLV_M_IDS(&intel_valleyview_m_info
),
459 INTEL_VLV_D_IDS(&intel_valleyview_d_info
),
460 INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info
),
461 INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info
),
462 INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info
),
463 INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info
),
464 INTEL_CHV_IDS(&intel_cherryview_info
),
465 INTEL_SKL_GT1_IDS(&intel_skylake_info
),
466 INTEL_SKL_GT2_IDS(&intel_skylake_info
),
467 INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info
),
468 INTEL_BXT_IDS(&intel_broxton_info
),
469 INTEL_KBL_GT1_IDS(&intel_kabylake_info
),
470 INTEL_KBL_GT2_IDS(&intel_kabylake_info
),
471 INTEL_KBL_GT3_IDS(&intel_kabylake_gt3_info
),
475 MODULE_DEVICE_TABLE(pci
, pciidlist
);
477 static enum intel_pch
intel_virt_detect_pch(struct drm_device
*dev
)
479 enum intel_pch ret
= PCH_NOP
;
482 * In a virtualized passthrough environment we can be in a
483 * setup where the ISA bridge is not able to be passed through.
484 * In this case, a south bridge can be emulated and we have to
485 * make an educated guess as to which PCH is really there.
490 DRM_DEBUG_KMS("Assuming Ibex Peak PCH\n");
491 } else if (IS_GEN6(dev
) || IS_IVYBRIDGE(dev
)) {
493 DRM_DEBUG_KMS("Assuming CouarPoint PCH\n");
494 } else if (IS_HASWELL(dev
) || IS_BROADWELL(dev
)) {
496 DRM_DEBUG_KMS("Assuming LynxPoint PCH\n");
497 } else if (IS_SKYLAKE(dev
) || IS_KABYLAKE(dev
)) {
499 DRM_DEBUG_KMS("Assuming SunrisePoint PCH\n");
505 void intel_detect_pch(struct drm_device
*dev
)
507 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
508 struct pci_dev
*pch
= NULL
;
510 /* In all current cases, num_pipes is equivalent to the PCH_NOP setting
511 * (which really amounts to a PCH but no South Display).
513 if (INTEL_INFO(dev
)->num_pipes
== 0) {
514 dev_priv
->pch_type
= PCH_NOP
;
519 * The reason to probe ISA bridge instead of Dev31:Fun0 is to
520 * make graphics device passthrough work easy for VMM, that only
521 * need to expose ISA bridge to let driver know the real hardware
522 * underneath. This is a requirement from virtualization team.
524 * In some virtualized environments (e.g. XEN), there is irrelevant
525 * ISA bridge in the system. To work reliably, we should scan trhough
526 * all the ISA bridge devices and check for the first match, instead
527 * of only checking the first one.
529 while ((pch
= pci_get_class(PCI_CLASS_BRIDGE_ISA
<< 8, pch
))) {
530 if (pch
->vendor
== PCI_VENDOR_ID_INTEL
) {
531 unsigned short id
= pch
->device
& INTEL_PCH_DEVICE_ID_MASK
;
532 dev_priv
->pch_id
= id
;
534 if (id
== INTEL_PCH_IBX_DEVICE_ID_TYPE
) {
535 dev_priv
->pch_type
= PCH_IBX
;
536 DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
537 WARN_ON(!IS_GEN5(dev
));
538 } else if (id
== INTEL_PCH_CPT_DEVICE_ID_TYPE
) {
539 dev_priv
->pch_type
= PCH_CPT
;
540 DRM_DEBUG_KMS("Found CougarPoint PCH\n");
541 WARN_ON(!(IS_GEN6(dev
) || IS_IVYBRIDGE(dev
)));
542 } else if (id
== INTEL_PCH_PPT_DEVICE_ID_TYPE
) {
543 /* PantherPoint is CPT compatible */
544 dev_priv
->pch_type
= PCH_CPT
;
545 DRM_DEBUG_KMS("Found PantherPoint PCH\n");
546 WARN_ON(!(IS_GEN6(dev
) || IS_IVYBRIDGE(dev
)));
547 } else if (id
== INTEL_PCH_LPT_DEVICE_ID_TYPE
) {
548 dev_priv
->pch_type
= PCH_LPT
;
549 DRM_DEBUG_KMS("Found LynxPoint PCH\n");
550 WARN_ON(!IS_HASWELL(dev
) && !IS_BROADWELL(dev
));
551 WARN_ON(IS_HSW_ULT(dev
) || IS_BDW_ULT(dev
));
552 } else if (id
== INTEL_PCH_LPT_LP_DEVICE_ID_TYPE
) {
553 dev_priv
->pch_type
= PCH_LPT
;
554 DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
555 WARN_ON(!IS_HASWELL(dev
) && !IS_BROADWELL(dev
));
556 WARN_ON(!IS_HSW_ULT(dev
) && !IS_BDW_ULT(dev
));
557 } else if (id
== INTEL_PCH_SPT_DEVICE_ID_TYPE
) {
558 dev_priv
->pch_type
= PCH_SPT
;
559 DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
560 WARN_ON(!IS_SKYLAKE(dev
) &&
562 } else if (id
== INTEL_PCH_SPT_LP_DEVICE_ID_TYPE
) {
563 dev_priv
->pch_type
= PCH_SPT
;
564 DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
565 WARN_ON(!IS_SKYLAKE(dev
) &&
567 } else if (id
== INTEL_PCH_P2X_DEVICE_ID_TYPE
) {
568 dev_priv
->pch_type
= intel_virt_detect_pch(dev
);
576 DRM_DEBUG_KMS("No PCH found.\n");
581 bool i915_semaphore_is_enabled(struct drm_device
*dev
)
583 if (INTEL_INFO(dev
)->gen
< 6)
586 if (i915
.semaphores
>= 0)
587 return i915
.semaphores
;
589 /* TODO: make semaphores and Execlists play nicely together */
590 if (i915
.enable_execlists
)
593 /* Until we get further testing... */
597 #ifdef CONFIG_INTEL_IOMMU
598 /* Enable semaphores on SNB when IO remapping is off */
599 if (INTEL_INFO(dev
)->gen
== 6 && intel_iommu_gfx_mapped
)
606 void i915_firmware_load_error_print(const char *fw_path
, int err
)
608 DRM_ERROR("failed to load firmware %s (%d)\n", fw_path
, err
);
611 * If the reason is not known assume -ENOENT since that's the most
612 * usual failure mode.
617 if (!(IS_BUILTIN(CONFIG_DRM_I915
) && err
== -ENOENT
))
621 "The driver is built-in, so to load the firmware you need to\n"
622 "include it either in the kernel (see CONFIG_EXTRA_FIRMWARE) or\n"
623 "in your initrd/initramfs image.\n");
626 static void intel_suspend_encoders(struct drm_i915_private
*dev_priv
)
628 struct drm_device
*dev
= dev_priv
->dev
;
629 struct drm_encoder
*encoder
;
631 drm_modeset_lock_all(dev
);
632 list_for_each_entry(encoder
, &dev
->mode_config
.encoder_list
, head
) {
633 struct intel_encoder
*intel_encoder
= to_intel_encoder(encoder
);
635 if (intel_encoder
->suspend
)
636 intel_encoder
->suspend(intel_encoder
);
638 drm_modeset_unlock_all(dev
);
641 static int intel_suspend_complete(struct drm_i915_private
*dev_priv
);
642 static int vlv_resume_prepare(struct drm_i915_private
*dev_priv
,
644 static int skl_resume_prepare(struct drm_i915_private
*dev_priv
);
645 static int bxt_resume_prepare(struct drm_i915_private
*dev_priv
);
648 static int i915_drm_suspend(struct drm_device
*dev
)
650 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
651 pci_power_t opregion_target_state
;
654 /* ignore lid events during suspend */
655 mutex_lock(&dev_priv
->modeset_restore_lock
);
656 dev_priv
->modeset_restore
= MODESET_SUSPENDED
;
657 mutex_unlock(&dev_priv
->modeset_restore_lock
);
659 /* We do a lot of poking in a lot of registers, make sure they work
661 intel_display_set_init_power(dev_priv
, true);
663 drm_kms_helper_poll_disable(dev
);
665 pci_save_state(dev
->pdev
);
667 error
= i915_gem_suspend(dev
);
669 dev_err(&dev
->pdev
->dev
,
670 "GEM idle failed, resume might fail\n");
674 intel_guc_suspend(dev
);
676 intel_suspend_gt_powersave(dev
);
679 * Disable CRTCs directly since we want to preserve sw state
680 * for _thaw. Also, power gate the CRTC power wells.
682 drm_modeset_lock_all(dev
);
683 intel_display_suspend(dev
);
684 drm_modeset_unlock_all(dev
);
686 intel_dp_mst_suspend(dev
);
688 intel_runtime_pm_disable_interrupts(dev_priv
);
689 intel_hpd_cancel_work(dev_priv
);
691 intel_suspend_encoders(dev_priv
);
693 intel_suspend_hw(dev
);
695 i915_gem_suspend_gtt_mappings(dev
);
697 i915_save_state(dev
);
699 opregion_target_state
= PCI_D3cold
;
700 #if IS_ENABLED(CONFIG_ACPI_SLEEP)
701 if (acpi_target_system_state() < ACPI_STATE_S3
)
702 opregion_target_state
= PCI_D1
;
704 intel_opregion_notify_adapter(dev
, opregion_target_state
);
706 intel_uncore_forcewake_reset(dev
, false);
707 intel_opregion_fini(dev
);
709 intel_fbdev_set_suspend(dev
, FBINFO_STATE_SUSPENDED
, true);
711 dev_priv
->suspend_count
++;
713 intel_display_set_init_power(dev_priv
, false);
718 static int i915_drm_suspend_late(struct drm_device
*drm_dev
, bool hibernation
)
720 struct drm_i915_private
*dev_priv
= drm_dev
->dev_private
;
723 ret
= intel_suspend_complete(dev_priv
);
726 DRM_ERROR("Suspend complete failed: %d\n", ret
);
731 pci_disable_device(drm_dev
->pdev
);
733 * During hibernation on some platforms the BIOS may try to access
734 * the device even though it's already in D3 and hang the machine. So
735 * leave the device in D0 on those platforms and hope the BIOS will
736 * power down the device properly. The issue was seen on multiple old
737 * GENs with different BIOS vendors, so having an explicit blacklist
738 * is inpractical; apply the workaround on everything pre GEN6. The
739 * platforms where the issue was seen:
740 * Lenovo Thinkpad X301, X61s, X60, T60, X41
744 if (!(hibernation
&& INTEL_INFO(dev_priv
)->gen
< 6))
745 pci_set_power_state(drm_dev
->pdev
, PCI_D3hot
);
750 int i915_suspend_switcheroo(struct drm_device
*dev
, pm_message_t state
)
754 if (!dev
|| !dev
->dev_private
) {
755 DRM_ERROR("dev: %p\n", dev
);
756 DRM_ERROR("DRM not initialized, aborting suspend.\n");
760 if (WARN_ON_ONCE(state
.event
!= PM_EVENT_SUSPEND
&&
761 state
.event
!= PM_EVENT_FREEZE
))
764 if (dev
->switch_power_state
== DRM_SWITCH_POWER_OFF
)
767 error
= i915_drm_suspend(dev
);
771 return i915_drm_suspend_late(dev
, false);
774 static int i915_drm_resume(struct drm_device
*dev
)
776 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
778 mutex_lock(&dev
->struct_mutex
);
779 i915_gem_restore_gtt_mappings(dev
);
780 mutex_unlock(&dev
->struct_mutex
);
782 i915_restore_state(dev
);
783 intel_opregion_setup(dev
);
785 intel_init_pch_refclk(dev
);
786 drm_mode_config_reset(dev
);
789 * Interrupts have to be enabled before any batches are run. If not the
790 * GPU will hang. i915_gem_init_hw() will initiate batches to
791 * update/restore the context.
793 * Modeset enabling in intel_modeset_init_hw() also needs working
796 intel_runtime_pm_enable_interrupts(dev_priv
);
798 mutex_lock(&dev
->struct_mutex
);
799 if (i915_gem_init_hw(dev
)) {
800 DRM_ERROR("failed to re-initialize GPU, declaring wedged!\n");
801 atomic_or(I915_WEDGED
, &dev_priv
->gpu_error
.reset_counter
);
803 mutex_unlock(&dev
->struct_mutex
);
805 intel_guc_resume(dev
);
807 intel_modeset_init_hw(dev
);
809 spin_lock_irq(&dev_priv
->irq_lock
);
810 if (dev_priv
->display
.hpd_irq_setup
)
811 dev_priv
->display
.hpd_irq_setup(dev
);
812 spin_unlock_irq(&dev_priv
->irq_lock
);
814 drm_modeset_lock_all(dev
);
815 intel_display_resume(dev
);
816 drm_modeset_unlock_all(dev
);
818 intel_dp_mst_resume(dev
);
821 * ... but also need to make sure that hotplug processing
822 * doesn't cause havoc. Like in the driver load code we don't
823 * bother with the tiny race here where we might loose hotplug
826 intel_hpd_init(dev_priv
);
827 /* Config may have changed between suspend and resume */
828 drm_helper_hpd_irq_event(dev
);
830 intel_opregion_init(dev
);
832 intel_fbdev_set_suspend(dev
, FBINFO_STATE_RUNNING
, false);
834 mutex_lock(&dev_priv
->modeset_restore_lock
);
835 dev_priv
->modeset_restore
= MODESET_DONE
;
836 mutex_unlock(&dev_priv
->modeset_restore_lock
);
838 intel_opregion_notify_adapter(dev
, PCI_D0
);
840 drm_kms_helper_poll_enable(dev
);
845 static int i915_drm_resume_early(struct drm_device
*dev
)
847 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
851 * We have a resume ordering issue with the snd-hda driver also
852 * requiring our device to be power up. Due to the lack of a
853 * parent/child relationship we currently solve this with an early
856 * FIXME: This should be solved with a special hdmi sink device or
857 * similar so that power domains can be employed.
859 if (pci_enable_device(dev
->pdev
))
862 pci_set_master(dev
->pdev
);
864 if (IS_VALLEYVIEW(dev_priv
))
865 ret
= vlv_resume_prepare(dev_priv
, false);
867 DRM_ERROR("Resume prepare failed: %d, continuing anyway\n",
870 intel_uncore_early_sanitize(dev
, true);
873 ret
= bxt_resume_prepare(dev_priv
);
874 else if (IS_SKYLAKE(dev_priv
) || IS_KABYLAKE(dev_priv
))
875 ret
= skl_resume_prepare(dev_priv
);
876 else if (IS_HASWELL(dev_priv
) || IS_BROADWELL(dev_priv
))
877 hsw_disable_pc8(dev_priv
);
879 intel_uncore_sanitize(dev
);
880 intel_power_domains_init_hw(dev_priv
);
885 int i915_resume_switcheroo(struct drm_device
*dev
)
889 if (dev
->switch_power_state
== DRM_SWITCH_POWER_OFF
)
892 ret
= i915_drm_resume_early(dev
);
896 return i915_drm_resume(dev
);
900 * i915_reset - reset chip after a hang
901 * @dev: drm device to reset
903 * Reset the chip. Useful if a hang is detected. Returns zero on successful
904 * reset or otherwise an error code.
906 * Procedure is fairly simple:
907 * - reset the chip using the reset reg
908 * - re-init context state
909 * - re-init hardware status page
910 * - re-init ring buffer
911 * - re-init interrupt state
914 int i915_reset(struct drm_device
*dev
)
916 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
920 intel_reset_gt_powersave(dev
);
922 mutex_lock(&dev
->struct_mutex
);
926 simulated
= dev_priv
->gpu_error
.stop_rings
!= 0;
928 ret
= intel_gpu_reset(dev
);
930 /* Also reset the gpu hangman. */
932 DRM_INFO("Simulated gpu hang, resetting stop_rings\n");
933 dev_priv
->gpu_error
.stop_rings
= 0;
934 if (ret
== -ENODEV
) {
935 DRM_INFO("Reset not implemented, but ignoring "
936 "error for simulated gpu hangs\n");
941 if (i915_stop_ring_allow_warn(dev_priv
))
942 pr_notice("drm/i915: Resetting chip after gpu hang\n");
945 DRM_ERROR("Failed to reset chip: %i\n", ret
);
946 mutex_unlock(&dev
->struct_mutex
);
950 intel_overlay_reset(dev_priv
);
952 /* Ok, now get things going again... */
955 * Everything depends on having the GTT running, so we need to start
956 * there. Fortunately we don't need to do this unless we reset the
957 * chip at a PCI level.
959 * Next we need to restore the context, but we don't use those
962 * Ring buffer needs to be re-initialized in the KMS case, or if X
963 * was running at the time of the reset (i.e. we weren't VT
967 /* Used to prevent gem_check_wedged returning -EAGAIN during gpu reset */
968 dev_priv
->gpu_error
.reload_in_reset
= true;
970 ret
= i915_gem_init_hw(dev
);
972 dev_priv
->gpu_error
.reload_in_reset
= false;
974 mutex_unlock(&dev
->struct_mutex
);
976 DRM_ERROR("Failed hw init on reset %d\n", ret
);
981 * rps/rc6 re-init is necessary to restore state lost after the
982 * reset and the re-install of gt irqs. Skip for ironlake per
983 * previous concerns that it doesn't respond well to some forms
984 * of re-init after reset.
986 if (INTEL_INFO(dev
)->gen
> 5)
987 intel_enable_gt_powersave(dev
);
992 static int i915_pci_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
994 struct intel_device_info
*intel_info
=
995 (struct intel_device_info
*) ent
->driver_data
;
997 if (IS_PRELIMINARY_HW(intel_info
) && !i915
.preliminary_hw_support
) {
998 DRM_INFO("This hardware requires preliminary hardware support.\n"
999 "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
1003 /* Only bind to function 0 of the device. Early generations
1004 * used function 1 as a placeholder for multi-head. This causes
1005 * us confusion instead, especially on the systems where both
1006 * functions have the same PCI-ID!
1008 if (PCI_FUNC(pdev
->devfn
))
1011 return drm_get_pci_dev(pdev
, ent
, &driver
);
1015 i915_pci_remove(struct pci_dev
*pdev
)
1017 struct drm_device
*dev
= pci_get_drvdata(pdev
);
1022 static int i915_pm_suspend(struct device
*dev
)
1024 struct pci_dev
*pdev
= to_pci_dev(dev
);
1025 struct drm_device
*drm_dev
= pci_get_drvdata(pdev
);
1027 if (!drm_dev
|| !drm_dev
->dev_private
) {
1028 dev_err(dev
, "DRM not initialized, aborting suspend.\n");
1032 if (drm_dev
->switch_power_state
== DRM_SWITCH_POWER_OFF
)
1035 return i915_drm_suspend(drm_dev
);
1038 static int i915_pm_suspend_late(struct device
*dev
)
1040 struct drm_device
*drm_dev
= dev_to_i915(dev
)->dev
;
1043 * We have a suspend ordering issue with the snd-hda driver also
1044 * requiring our device to be power up. Due to the lack of a
1045 * parent/child relationship we currently solve this with an late
1048 * FIXME: This should be solved with a special hdmi sink device or
1049 * similar so that power domains can be employed.
1051 if (drm_dev
->switch_power_state
== DRM_SWITCH_POWER_OFF
)
1054 return i915_drm_suspend_late(drm_dev
, false);
1057 static int i915_pm_poweroff_late(struct device
*dev
)
1059 struct drm_device
*drm_dev
= dev_to_i915(dev
)->dev
;
1061 if (drm_dev
->switch_power_state
== DRM_SWITCH_POWER_OFF
)
1064 return i915_drm_suspend_late(drm_dev
, true);
1067 static int i915_pm_resume_early(struct device
*dev
)
1069 struct drm_device
*drm_dev
= dev_to_i915(dev
)->dev
;
1071 if (drm_dev
->switch_power_state
== DRM_SWITCH_POWER_OFF
)
1074 return i915_drm_resume_early(drm_dev
);
1077 static int i915_pm_resume(struct device
*dev
)
1079 struct drm_device
*drm_dev
= dev_to_i915(dev
)->dev
;
1081 if (drm_dev
->switch_power_state
== DRM_SWITCH_POWER_OFF
)
1084 return i915_drm_resume(drm_dev
);
1087 static int skl_suspend_complete(struct drm_i915_private
*dev_priv
)
1089 enum csr_state state
;
1090 /* Enabling DC6 is not a hard requirement to enter runtime D3 */
1092 skl_uninit_cdclk(dev_priv
);
1094 /* TODO: wait for a completion event or
1095 * similar here instead of busy
1096 * waiting using wait_for function.
1098 wait_for((state
= intel_csr_load_status_get(dev_priv
)) !=
1099 FW_UNINITIALIZED
, 1000);
1100 if (state
== FW_LOADED
)
1101 skl_enable_dc6(dev_priv
);
1106 static int hsw_suspend_complete(struct drm_i915_private
*dev_priv
)
1108 hsw_enable_pc8(dev_priv
);
1113 static int bxt_suspend_complete(struct drm_i915_private
*dev_priv
)
1115 struct drm_device
*dev
= dev_priv
->dev
;
1117 /* TODO: when DC5 support is added disable DC5 here. */
1119 broxton_ddi_phy_uninit(dev
);
1120 broxton_uninit_cdclk(dev
);
1121 bxt_enable_dc9(dev_priv
);
1126 static int bxt_resume_prepare(struct drm_i915_private
*dev_priv
)
1128 struct drm_device
*dev
= dev_priv
->dev
;
1130 /* TODO: when CSR FW support is added make sure the FW is loaded */
1132 bxt_disable_dc9(dev_priv
);
1135 * TODO: when DC5 support is added enable DC5 here if the CSR FW
1138 broxton_init_cdclk(dev
);
1139 broxton_ddi_phy_init(dev
);
1140 intel_prepare_ddi(dev
);
1145 static int skl_resume_prepare(struct drm_i915_private
*dev_priv
)
1147 struct drm_device
*dev
= dev_priv
->dev
;
1149 if (intel_csr_load_status_get(dev_priv
) == FW_LOADED
)
1150 skl_disable_dc6(dev_priv
);
1152 skl_init_cdclk(dev_priv
);
1153 intel_csr_load_program(dev
);
1159 * Save all Gunit registers that may be lost after a D3 and a subsequent
1160 * S0i[R123] transition. The list of registers needing a save/restore is
1161 * defined in the VLV2_S0IXRegs document. This documents marks all Gunit
1162 * registers in the following way:
1163 * - Driver: saved/restored by the driver
1164 * - Punit : saved/restored by the Punit firmware
1165 * - No, w/o marking: no need to save/restore, since the register is R/O or
1166 * used internally by the HW in a way that doesn't depend
1167 * keeping the content across a suspend/resume.
1168 * - Debug : used for debugging
1170 * We save/restore all registers marked with 'Driver', with the following
1172 * - Registers out of use, including also registers marked with 'Debug'.
1173 * These have no effect on the driver's operation, so we don't save/restore
1174 * them to reduce the overhead.
1175 * - Registers that are fully setup by an initialization function called from
1176 * the resume path. For example many clock gating and RPS/RC6 registers.
1177 * - Registers that provide the right functionality with their reset defaults.
1179 * TODO: Except for registers that based on the above 3 criteria can be safely
1180 * ignored, we save/restore all others, practically treating the HW context as
1181 * a black-box for the driver. Further investigation is needed to reduce the
1182 * saved/restored registers even further, by following the same 3 criteria.
1184 static void vlv_save_gunit_s0ix_state(struct drm_i915_private
*dev_priv
)
1186 struct vlv_s0ix_state
*s
= &dev_priv
->vlv_s0ix_state
;
1189 /* GAM 0x4000-0x4770 */
1190 s
->wr_watermark
= I915_READ(GEN7_WR_WATERMARK
);
1191 s
->gfx_prio_ctrl
= I915_READ(GEN7_GFX_PRIO_CTRL
);
1192 s
->arb_mode
= I915_READ(ARB_MODE
);
1193 s
->gfx_pend_tlb0
= I915_READ(GEN7_GFX_PEND_TLB0
);
1194 s
->gfx_pend_tlb1
= I915_READ(GEN7_GFX_PEND_TLB1
);
1196 for (i
= 0; i
< ARRAY_SIZE(s
->lra_limits
); i
++)
1197 s
->lra_limits
[i
] = I915_READ(GEN7_LRA_LIMITS(i
));
1199 s
->media_max_req_count
= I915_READ(GEN7_MEDIA_MAX_REQ_COUNT
);
1200 s
->gfx_max_req_count
= I915_READ(GEN7_GFX_MAX_REQ_COUNT
);
1202 s
->render_hwsp
= I915_READ(RENDER_HWS_PGA_GEN7
);
1203 s
->ecochk
= I915_READ(GAM_ECOCHK
);
1204 s
->bsd_hwsp
= I915_READ(BSD_HWS_PGA_GEN7
);
1205 s
->blt_hwsp
= I915_READ(BLT_HWS_PGA_GEN7
);
1207 s
->tlb_rd_addr
= I915_READ(GEN7_TLB_RD_ADDR
);
1209 /* MBC 0x9024-0x91D0, 0x8500 */
1210 s
->g3dctl
= I915_READ(VLV_G3DCTL
);
1211 s
->gsckgctl
= I915_READ(VLV_GSCKGCTL
);
1212 s
->mbctl
= I915_READ(GEN6_MBCTL
);
1214 /* GCP 0x9400-0x9424, 0x8100-0x810C */
1215 s
->ucgctl1
= I915_READ(GEN6_UCGCTL1
);
1216 s
->ucgctl3
= I915_READ(GEN6_UCGCTL3
);
1217 s
->rcgctl1
= I915_READ(GEN6_RCGCTL1
);
1218 s
->rcgctl2
= I915_READ(GEN6_RCGCTL2
);
1219 s
->rstctl
= I915_READ(GEN6_RSTCTL
);
1220 s
->misccpctl
= I915_READ(GEN7_MISCCPCTL
);
1222 /* GPM 0xA000-0xAA84, 0x8000-0x80FC */
1223 s
->gfxpause
= I915_READ(GEN6_GFXPAUSE
);
1224 s
->rpdeuhwtc
= I915_READ(GEN6_RPDEUHWTC
);
1225 s
->rpdeuc
= I915_READ(GEN6_RPDEUC
);
1226 s
->ecobus
= I915_READ(ECOBUS
);
1227 s
->pwrdwnupctl
= I915_READ(VLV_PWRDWNUPCTL
);
1228 s
->rp_down_timeout
= I915_READ(GEN6_RP_DOWN_TIMEOUT
);
1229 s
->rp_deucsw
= I915_READ(GEN6_RPDEUCSW
);
1230 s
->rcubmabdtmr
= I915_READ(GEN6_RCUBMABDTMR
);
1231 s
->rcedata
= I915_READ(VLV_RCEDATA
);
1232 s
->spare2gh
= I915_READ(VLV_SPAREG2H
);
1234 /* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */
1235 s
->gt_imr
= I915_READ(GTIMR
);
1236 s
->gt_ier
= I915_READ(GTIER
);
1237 s
->pm_imr
= I915_READ(GEN6_PMIMR
);
1238 s
->pm_ier
= I915_READ(GEN6_PMIER
);
1240 for (i
= 0; i
< ARRAY_SIZE(s
->gt_scratch
); i
++)
1241 s
->gt_scratch
[i
] = I915_READ(GEN7_GT_SCRATCH(i
));
1243 /* GT SA CZ domain, 0x100000-0x138124 */
1244 s
->tilectl
= I915_READ(TILECTL
);
1245 s
->gt_fifoctl
= I915_READ(GTFIFOCTL
);
1246 s
->gtlc_wake_ctrl
= I915_READ(VLV_GTLC_WAKE_CTRL
);
1247 s
->gtlc_survive
= I915_READ(VLV_GTLC_SURVIVABILITY_REG
);
1248 s
->pmwgicz
= I915_READ(VLV_PMWGICZ
);
1250 /* Gunit-Display CZ domain, 0x182028-0x1821CF */
1251 s
->gu_ctl0
= I915_READ(VLV_GU_CTL0
);
1252 s
->gu_ctl1
= I915_READ(VLV_GU_CTL1
);
1253 s
->pcbr
= I915_READ(VLV_PCBR
);
1254 s
->clock_gate_dis2
= I915_READ(VLV_GUNIT_CLOCK_GATE2
);
1257 * Not saving any of:
1258 * DFT, 0x9800-0x9EC0
1259 * SARB, 0xB000-0xB1FC
1260 * GAC, 0x5208-0x524C, 0x14000-0x14C000
1265 static void vlv_restore_gunit_s0ix_state(struct drm_i915_private
*dev_priv
)
1267 struct vlv_s0ix_state
*s
= &dev_priv
->vlv_s0ix_state
;
1271 /* GAM 0x4000-0x4770 */
1272 I915_WRITE(GEN7_WR_WATERMARK
, s
->wr_watermark
);
1273 I915_WRITE(GEN7_GFX_PRIO_CTRL
, s
->gfx_prio_ctrl
);
1274 I915_WRITE(ARB_MODE
, s
->arb_mode
| (0xffff << 16));
1275 I915_WRITE(GEN7_GFX_PEND_TLB0
, s
->gfx_pend_tlb0
);
1276 I915_WRITE(GEN7_GFX_PEND_TLB1
, s
->gfx_pend_tlb1
);
1278 for (i
= 0; i
< ARRAY_SIZE(s
->lra_limits
); i
++)
1279 I915_WRITE(GEN7_LRA_LIMITS(i
), s
->lra_limits
[i
]);
1281 I915_WRITE(GEN7_MEDIA_MAX_REQ_COUNT
, s
->media_max_req_count
);
1282 I915_WRITE(GEN7_GFX_MAX_REQ_COUNT
, s
->gfx_max_req_count
);
1284 I915_WRITE(RENDER_HWS_PGA_GEN7
, s
->render_hwsp
);
1285 I915_WRITE(GAM_ECOCHK
, s
->ecochk
);
1286 I915_WRITE(BSD_HWS_PGA_GEN7
, s
->bsd_hwsp
);
1287 I915_WRITE(BLT_HWS_PGA_GEN7
, s
->blt_hwsp
);
1289 I915_WRITE(GEN7_TLB_RD_ADDR
, s
->tlb_rd_addr
);
1291 /* MBC 0x9024-0x91D0, 0x8500 */
1292 I915_WRITE(VLV_G3DCTL
, s
->g3dctl
);
1293 I915_WRITE(VLV_GSCKGCTL
, s
->gsckgctl
);
1294 I915_WRITE(GEN6_MBCTL
, s
->mbctl
);
1296 /* GCP 0x9400-0x9424, 0x8100-0x810C */
1297 I915_WRITE(GEN6_UCGCTL1
, s
->ucgctl1
);
1298 I915_WRITE(GEN6_UCGCTL3
, s
->ucgctl3
);
1299 I915_WRITE(GEN6_RCGCTL1
, s
->rcgctl1
);
1300 I915_WRITE(GEN6_RCGCTL2
, s
->rcgctl2
);
1301 I915_WRITE(GEN6_RSTCTL
, s
->rstctl
);
1302 I915_WRITE(GEN7_MISCCPCTL
, s
->misccpctl
);
1304 /* GPM 0xA000-0xAA84, 0x8000-0x80FC */
1305 I915_WRITE(GEN6_GFXPAUSE
, s
->gfxpause
);
1306 I915_WRITE(GEN6_RPDEUHWTC
, s
->rpdeuhwtc
);
1307 I915_WRITE(GEN6_RPDEUC
, s
->rpdeuc
);
1308 I915_WRITE(ECOBUS
, s
->ecobus
);
1309 I915_WRITE(VLV_PWRDWNUPCTL
, s
->pwrdwnupctl
);
1310 I915_WRITE(GEN6_RP_DOWN_TIMEOUT
,s
->rp_down_timeout
);
1311 I915_WRITE(GEN6_RPDEUCSW
, s
->rp_deucsw
);
1312 I915_WRITE(GEN6_RCUBMABDTMR
, s
->rcubmabdtmr
);
1313 I915_WRITE(VLV_RCEDATA
, s
->rcedata
);
1314 I915_WRITE(VLV_SPAREG2H
, s
->spare2gh
);
1316 /* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */
1317 I915_WRITE(GTIMR
, s
->gt_imr
);
1318 I915_WRITE(GTIER
, s
->gt_ier
);
1319 I915_WRITE(GEN6_PMIMR
, s
->pm_imr
);
1320 I915_WRITE(GEN6_PMIER
, s
->pm_ier
);
1322 for (i
= 0; i
< ARRAY_SIZE(s
->gt_scratch
); i
++)
1323 I915_WRITE(GEN7_GT_SCRATCH(i
), s
->gt_scratch
[i
]);
1325 /* GT SA CZ domain, 0x100000-0x138124 */
1326 I915_WRITE(TILECTL
, s
->tilectl
);
1327 I915_WRITE(GTFIFOCTL
, s
->gt_fifoctl
);
1329 * Preserve the GT allow wake and GFX force clock bit, they are not
1330 * be restored, as they are used to control the s0ix suspend/resume
1331 * sequence by the caller.
1333 val
= I915_READ(VLV_GTLC_WAKE_CTRL
);
1334 val
&= VLV_GTLC_ALLOWWAKEREQ
;
1335 val
|= s
->gtlc_wake_ctrl
& ~VLV_GTLC_ALLOWWAKEREQ
;
1336 I915_WRITE(VLV_GTLC_WAKE_CTRL
, val
);
1338 val
= I915_READ(VLV_GTLC_SURVIVABILITY_REG
);
1339 val
&= VLV_GFX_CLK_FORCE_ON_BIT
;
1340 val
|= s
->gtlc_survive
& ~VLV_GFX_CLK_FORCE_ON_BIT
;
1341 I915_WRITE(VLV_GTLC_SURVIVABILITY_REG
, val
);
1343 I915_WRITE(VLV_PMWGICZ
, s
->pmwgicz
);
1345 /* Gunit-Display CZ domain, 0x182028-0x1821CF */
1346 I915_WRITE(VLV_GU_CTL0
, s
->gu_ctl0
);
1347 I915_WRITE(VLV_GU_CTL1
, s
->gu_ctl1
);
1348 I915_WRITE(VLV_PCBR
, s
->pcbr
);
1349 I915_WRITE(VLV_GUNIT_CLOCK_GATE2
, s
->clock_gate_dis2
);
1352 int vlv_force_gfx_clock(struct drm_i915_private
*dev_priv
, bool force_on
)
1357 #define COND (I915_READ(VLV_GTLC_SURVIVABILITY_REG) & VLV_GFX_CLK_STATUS_BIT)
1359 val
= I915_READ(VLV_GTLC_SURVIVABILITY_REG
);
1360 val
&= ~VLV_GFX_CLK_FORCE_ON_BIT
;
1362 val
|= VLV_GFX_CLK_FORCE_ON_BIT
;
1363 I915_WRITE(VLV_GTLC_SURVIVABILITY_REG
, val
);
1368 err
= wait_for(COND
, 20);
1370 DRM_ERROR("timeout waiting for GFX clock force-on (%08x)\n",
1371 I915_READ(VLV_GTLC_SURVIVABILITY_REG
));
1377 static int vlv_allow_gt_wake(struct drm_i915_private
*dev_priv
, bool allow
)
1382 val
= I915_READ(VLV_GTLC_WAKE_CTRL
);
1383 val
&= ~VLV_GTLC_ALLOWWAKEREQ
;
1385 val
|= VLV_GTLC_ALLOWWAKEREQ
;
1386 I915_WRITE(VLV_GTLC_WAKE_CTRL
, val
);
1387 POSTING_READ(VLV_GTLC_WAKE_CTRL
);
1389 #define COND (!!(I915_READ(VLV_GTLC_PW_STATUS) & VLV_GTLC_ALLOWWAKEACK) == \
1391 err
= wait_for(COND
, 1);
1393 DRM_ERROR("timeout disabling GT waking\n");
1398 static int vlv_wait_for_gt_wells(struct drm_i915_private
*dev_priv
,
1405 mask
= VLV_GTLC_PW_MEDIA_STATUS_MASK
| VLV_GTLC_PW_RENDER_STATUS_MASK
;
1406 val
= wait_for_on
? mask
: 0;
1407 #define COND ((I915_READ(VLV_GTLC_PW_STATUS) & mask) == val)
1411 DRM_DEBUG_KMS("waiting for GT wells to go %s (%08x)\n",
1412 wait_for_on
? "on" : "off",
1413 I915_READ(VLV_GTLC_PW_STATUS
));
1416 * RC6 transitioning can be delayed up to 2 msec (see
1417 * valleyview_enable_rps), use 3 msec for safety.
1419 err
= wait_for(COND
, 3);
1421 DRM_ERROR("timeout waiting for GT wells to go %s\n",
1422 wait_for_on
? "on" : "off");
1428 static void vlv_check_no_gt_access(struct drm_i915_private
*dev_priv
)
1430 if (!(I915_READ(VLV_GTLC_PW_STATUS
) & VLV_GTLC_ALLOWWAKEERR
))
1433 DRM_ERROR("GT register access while GT waking disabled\n");
1434 I915_WRITE(VLV_GTLC_PW_STATUS
, VLV_GTLC_ALLOWWAKEERR
);
1437 static int vlv_suspend_complete(struct drm_i915_private
*dev_priv
)
1443 * Bspec defines the following GT well on flags as debug only, so
1444 * don't treat them as hard failures.
1446 (void)vlv_wait_for_gt_wells(dev_priv
, false);
1448 mask
= VLV_GTLC_RENDER_CTX_EXISTS
| VLV_GTLC_MEDIA_CTX_EXISTS
;
1449 WARN_ON((I915_READ(VLV_GTLC_WAKE_CTRL
) & mask
) != mask
);
1451 vlv_check_no_gt_access(dev_priv
);
1453 err
= vlv_force_gfx_clock(dev_priv
, true);
1457 err
= vlv_allow_gt_wake(dev_priv
, false);
1461 if (!IS_CHERRYVIEW(dev_priv
->dev
))
1462 vlv_save_gunit_s0ix_state(dev_priv
);
1464 err
= vlv_force_gfx_clock(dev_priv
, false);
1471 /* For safety always re-enable waking and disable gfx clock forcing */
1472 vlv_allow_gt_wake(dev_priv
, true);
1474 vlv_force_gfx_clock(dev_priv
, false);
1479 static int vlv_resume_prepare(struct drm_i915_private
*dev_priv
,
1482 struct drm_device
*dev
= dev_priv
->dev
;
1487 * If any of the steps fail just try to continue, that's the best we
1488 * can do at this point. Return the first error code (which will also
1489 * leave RPM permanently disabled).
1491 ret
= vlv_force_gfx_clock(dev_priv
, true);
1493 if (!IS_CHERRYVIEW(dev_priv
->dev
))
1494 vlv_restore_gunit_s0ix_state(dev_priv
);
1496 err
= vlv_allow_gt_wake(dev_priv
, true);
1500 err
= vlv_force_gfx_clock(dev_priv
, false);
1504 vlv_check_no_gt_access(dev_priv
);
1507 intel_init_clock_gating(dev
);
1508 i915_gem_restore_fences(dev
);
1514 static int intel_runtime_suspend(struct device
*device
)
1516 struct pci_dev
*pdev
= to_pci_dev(device
);
1517 struct drm_device
*dev
= pci_get_drvdata(pdev
);
1518 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1521 if (WARN_ON_ONCE(!(dev_priv
->rps
.enabled
&& intel_enable_rc6(dev
))))
1524 if (WARN_ON_ONCE(!HAS_RUNTIME_PM(dev
)))
1527 DRM_DEBUG_KMS("Suspending device\n");
1530 * We could deadlock here in case another thread holding struct_mutex
1531 * calls RPM suspend concurrently, since the RPM suspend will wait
1532 * first for this RPM suspend to finish. In this case the concurrent
1533 * RPM resume will be followed by its RPM suspend counterpart. Still
1534 * for consistency return -EAGAIN, which will reschedule this suspend.
1536 if (!mutex_trylock(&dev
->struct_mutex
)) {
1537 DRM_DEBUG_KMS("device lock contention, deffering suspend\n");
1539 * Bump the expiration timestamp, otherwise the suspend won't
1542 pm_runtime_mark_last_busy(device
);
1547 * We are safe here against re-faults, since the fault handler takes
1550 i915_gem_release_all_mmaps(dev_priv
);
1551 mutex_unlock(&dev
->struct_mutex
);
1553 intel_guc_suspend(dev
);
1555 intel_suspend_gt_powersave(dev
);
1556 intel_runtime_pm_disable_interrupts(dev_priv
);
1558 ret
= intel_suspend_complete(dev_priv
);
1560 DRM_ERROR("Runtime suspend failed, disabling it (%d)\n", ret
);
1561 intel_runtime_pm_enable_interrupts(dev_priv
);
1566 cancel_delayed_work_sync(&dev_priv
->gpu_error
.hangcheck_work
);
1567 intel_uncore_forcewake_reset(dev
, false);
1568 dev_priv
->pm
.suspended
= true;
1571 * FIXME: We really should find a document that references the arguments
1574 if (IS_BROADWELL(dev
)) {
1576 * On Broadwell, if we use PCI_D1 the PCH DDI ports will stop
1577 * being detected, and the call we do at intel_runtime_resume()
1578 * won't be able to restore them. Since PCI_D3hot matches the
1579 * actual specification and appears to be working, use it.
1581 intel_opregion_notify_adapter(dev
, PCI_D3hot
);
1584 * current versions of firmware which depend on this opregion
1585 * notification have repurposed the D1 definition to mean
1586 * "runtime suspended" vs. what you would normally expect (D3)
1587 * to distinguish it from notifications that might be sent via
1590 intel_opregion_notify_adapter(dev
, PCI_D1
);
1593 assert_forcewakes_inactive(dev_priv
);
1595 DRM_DEBUG_KMS("Device suspended\n");
1599 static int intel_runtime_resume(struct device
*device
)
1601 struct pci_dev
*pdev
= to_pci_dev(device
);
1602 struct drm_device
*dev
= pci_get_drvdata(pdev
);
1603 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1606 if (WARN_ON_ONCE(!HAS_RUNTIME_PM(dev
)))
1609 DRM_DEBUG_KMS("Resuming device\n");
1611 intel_opregion_notify_adapter(dev
, PCI_D0
);
1612 dev_priv
->pm
.suspended
= false;
1614 intel_guc_resume(dev
);
1616 if (IS_GEN6(dev_priv
))
1617 intel_init_pch_refclk(dev
);
1619 if (IS_BROXTON(dev
))
1620 ret
= bxt_resume_prepare(dev_priv
);
1621 else if (IS_SKYLAKE(dev
) || IS_KABYLAKE(dev
))
1622 ret
= skl_resume_prepare(dev_priv
);
1623 else if (IS_HASWELL(dev_priv
) || IS_BROADWELL(dev_priv
))
1624 hsw_disable_pc8(dev_priv
);
1625 else if (IS_VALLEYVIEW(dev_priv
))
1626 ret
= vlv_resume_prepare(dev_priv
, true);
1629 * No point of rolling back things in case of an error, as the best
1630 * we can do is to hope that things will still work (and disable RPM).
1632 i915_gem_init_swizzling(dev
);
1633 gen6_update_ring_freq(dev
);
1635 intel_runtime_pm_enable_interrupts(dev_priv
);
1638 * On VLV/CHV display interrupts are part of the display
1639 * power well, so hpd is reinitialized from there. For
1640 * everyone else do it here.
1642 if (!IS_VALLEYVIEW(dev_priv
))
1643 intel_hpd_init(dev_priv
);
1645 intel_enable_gt_powersave(dev
);
1648 DRM_ERROR("Runtime resume failed, disabling it (%d)\n", ret
);
1650 DRM_DEBUG_KMS("Device resumed\n");
1656 * This function implements common functionality of runtime and system
1659 static int intel_suspend_complete(struct drm_i915_private
*dev_priv
)
1663 if (IS_BROXTON(dev_priv
))
1664 ret
= bxt_suspend_complete(dev_priv
);
1665 else if (IS_SKYLAKE(dev_priv
) || IS_KABYLAKE(dev_priv
))
1666 ret
= skl_suspend_complete(dev_priv
);
1667 else if (IS_HASWELL(dev_priv
) || IS_BROADWELL(dev_priv
))
1668 ret
= hsw_suspend_complete(dev_priv
);
1669 else if (IS_VALLEYVIEW(dev_priv
))
1670 ret
= vlv_suspend_complete(dev_priv
);
1677 static const struct dev_pm_ops i915_pm_ops
= {
1679 * S0ix (via system suspend) and S3 event handlers [PMSG_SUSPEND,
1682 .suspend
= i915_pm_suspend
,
1683 .suspend_late
= i915_pm_suspend_late
,
1684 .resume_early
= i915_pm_resume_early
,
1685 .resume
= i915_pm_resume
,
1689 * @freeze, @freeze_late : called (1) before creating the
1690 * hibernation image [PMSG_FREEZE] and
1691 * (2) after rebooting, before restoring
1692 * the image [PMSG_QUIESCE]
1693 * @thaw, @thaw_early : called (1) after creating the hibernation
1694 * image, before writing it [PMSG_THAW]
1695 * and (2) after failing to create or
1696 * restore the image [PMSG_RECOVER]
1697 * @poweroff, @poweroff_late: called after writing the hibernation
1698 * image, before rebooting [PMSG_HIBERNATE]
1699 * @restore, @restore_early : called after rebooting and restoring the
1700 * hibernation image [PMSG_RESTORE]
1702 .freeze
= i915_pm_suspend
,
1703 .freeze_late
= i915_pm_suspend_late
,
1704 .thaw_early
= i915_pm_resume_early
,
1705 .thaw
= i915_pm_resume
,
1706 .poweroff
= i915_pm_suspend
,
1707 .poweroff_late
= i915_pm_poweroff_late
,
1708 .restore_early
= i915_pm_resume_early
,
1709 .restore
= i915_pm_resume
,
1711 /* S0ix (via runtime suspend) event handlers */
1712 .runtime_suspend
= intel_runtime_suspend
,
1713 .runtime_resume
= intel_runtime_resume
,
1716 static const struct vm_operations_struct i915_gem_vm_ops
= {
1717 .fault
= i915_gem_fault
,
1718 .open
= drm_gem_vm_open
,
1719 .close
= drm_gem_vm_close
,
1722 static const struct file_operations i915_driver_fops
= {
1723 .owner
= THIS_MODULE
,
1725 .release
= drm_release
,
1726 .unlocked_ioctl
= drm_ioctl
,
1727 .mmap
= drm_gem_mmap
,
1730 #ifdef CONFIG_COMPAT
1731 .compat_ioctl
= i915_compat_ioctl
,
1733 .llseek
= noop_llseek
,
1736 static struct drm_driver driver
= {
1737 /* Don't use MTRRs here; the Xserver or userspace app should
1738 * deal with them for Intel hardware.
1741 DRIVER_HAVE_IRQ
| DRIVER_IRQ_SHARED
| DRIVER_GEM
| DRIVER_PRIME
|
1742 DRIVER_RENDER
| DRIVER_MODESET
,
1743 .load
= i915_driver_load
,
1744 .unload
= i915_driver_unload
,
1745 .open
= i915_driver_open
,
1746 .lastclose
= i915_driver_lastclose
,
1747 .preclose
= i915_driver_preclose
,
1748 .postclose
= i915_driver_postclose
,
1749 .set_busid
= drm_pci_set_busid
,
1751 #if defined(CONFIG_DEBUG_FS)
1752 .debugfs_init
= i915_debugfs_init
,
1753 .debugfs_cleanup
= i915_debugfs_cleanup
,
1755 .gem_free_object
= i915_gem_free_object
,
1756 .gem_vm_ops
= &i915_gem_vm_ops
,
1758 .prime_handle_to_fd
= drm_gem_prime_handle_to_fd
,
1759 .prime_fd_to_handle
= drm_gem_prime_fd_to_handle
,
1760 .gem_prime_export
= i915_gem_prime_export
,
1761 .gem_prime_import
= i915_gem_prime_import
,
1763 .dumb_create
= i915_gem_dumb_create
,
1764 .dumb_map_offset
= i915_gem_mmap_gtt
,
1765 .dumb_destroy
= drm_gem_dumb_destroy
,
1766 .ioctls
= i915_ioctls
,
1767 .fops
= &i915_driver_fops
,
1768 .name
= DRIVER_NAME
,
1769 .desc
= DRIVER_DESC
,
1770 .date
= DRIVER_DATE
,
1771 .major
= DRIVER_MAJOR
,
1772 .minor
= DRIVER_MINOR
,
1773 .patchlevel
= DRIVER_PATCHLEVEL
,
1776 static struct pci_driver i915_pci_driver
= {
1777 .name
= DRIVER_NAME
,
1778 .id_table
= pciidlist
,
1779 .probe
= i915_pci_probe
,
1780 .remove
= i915_pci_remove
,
1781 .driver
.pm
= &i915_pm_ops
,
1784 static int __init
i915_init(void)
1786 driver
.num_ioctls
= i915_max_ioctl
;
1789 * Enable KMS by default, unless explicitly overriden by
1790 * either the i915.modeset prarameter or by the
1791 * vga_text_mode_force boot option.
1794 if (i915
.modeset
== 0)
1795 driver
.driver_features
&= ~DRIVER_MODESET
;
1797 #ifdef CONFIG_VGA_CONSOLE
1798 if (vgacon_text_force() && i915
.modeset
== -1)
1799 driver
.driver_features
&= ~DRIVER_MODESET
;
1802 if (!(driver
.driver_features
& DRIVER_MODESET
)) {
1803 /* Silently fail loading to not upset userspace. */
1804 DRM_DEBUG_DRIVER("KMS and UMS disabled.\n");
1808 if (i915
.nuclear_pageflip
)
1809 driver
.driver_features
|= DRIVER_ATOMIC
;
1811 return drm_pci_init(&driver
, &i915_pci_driver
);
1814 static void __exit
i915_exit(void)
1816 if (!(driver
.driver_features
& DRIVER_MODESET
))
1817 return; /* Never loaded a driver. */
1819 drm_pci_exit(&driver
, &i915_pci_driver
);
1822 module_init(i915_init
);
1823 module_exit(i915_exit
);
1825 MODULE_AUTHOR("Tungsten Graphics, Inc.");
1826 MODULE_AUTHOR("Intel Corporation");
1828 MODULE_DESCRIPTION(DRIVER_DESC
);
1829 MODULE_LICENSE("GPL and additional rights");