2 * Copyright © 2008 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
24 * Keith Packard <keithp@keithp.com>
28 #include <linux/i2c.h>
29 #include <linux/slab.h>
30 #include <linux/export.h>
31 #include <linux/notifier.h>
32 #include <linux/reboot.h>
34 #include <drm/drm_atomic_helper.h>
35 #include <drm/drm_crtc.h>
36 #include <drm/drm_crtc_helper.h>
37 #include <drm/drm_edid.h>
38 #include "intel_drv.h"
39 #include <drm/i915_drm.h>
42 #define DP_LINK_CHECK_TIMEOUT (10 * 1000)
44 /* Compliance test status bits */
45 #define INTEL_DP_RESOLUTION_SHIFT_MASK 0
46 #define INTEL_DP_RESOLUTION_PREFERRED (1 << INTEL_DP_RESOLUTION_SHIFT_MASK)
47 #define INTEL_DP_RESOLUTION_STANDARD (2 << INTEL_DP_RESOLUTION_SHIFT_MASK)
48 #define INTEL_DP_RESOLUTION_FAILSAFE (3 << INTEL_DP_RESOLUTION_SHIFT_MASK)
55 static const struct dp_link_dpll gen4_dpll
[] = {
57 { .p1
= 2, .p2
= 10, .n
= 2, .m1
= 23, .m2
= 8 } },
59 { .p1
= 1, .p2
= 10, .n
= 1, .m1
= 14, .m2
= 2 } }
62 static const struct dp_link_dpll pch_dpll
[] = {
64 { .p1
= 2, .p2
= 10, .n
= 1, .m1
= 12, .m2
= 9 } },
66 { .p1
= 1, .p2
= 10, .n
= 2, .m1
= 14, .m2
= 8 } }
69 static const struct dp_link_dpll vlv_dpll
[] = {
71 { .p1
= 3, .p2
= 2, .n
= 5, .m1
= 3, .m2
= 81 } },
73 { .p1
= 2, .p2
= 2, .n
= 1, .m1
= 2, .m2
= 27 } }
77 * CHV supports eDP 1.4 that have more link rates.
78 * Below only provides the fixed rate but exclude variable rate.
80 static const struct dp_link_dpll chv_dpll
[] = {
82 * CHV requires to program fractional division for m2.
83 * m2 is stored in fixed point format using formula below
84 * (m2_int << 22) | m2_fraction
86 { 162000, /* m2_int = 32, m2_fraction = 1677722 */
87 { .p1
= 4, .p2
= 2, .n
= 1, .m1
= 2, .m2
= 0x819999a } },
88 { 270000, /* m2_int = 27, m2_fraction = 0 */
89 { .p1
= 4, .p2
= 1, .n
= 1, .m1
= 2, .m2
= 0x6c00000 } },
90 { 540000, /* m2_int = 27, m2_fraction = 0 */
91 { .p1
= 2, .p2
= 1, .n
= 1, .m1
= 2, .m2
= 0x6c00000 } }
94 static const int bxt_rates
[] = { 162000, 216000, 243000, 270000,
95 324000, 432000, 540000 };
96 static const int skl_rates
[] = { 162000, 216000, 270000,
97 324000, 432000, 540000 };
98 static const int default_rates
[] = { 162000, 270000, 540000 };
101 * is_edp - is the given port attached to an eDP panel (either CPU or PCH)
102 * @intel_dp: DP struct
104 * If a CPU or PCH DP output is attached to an eDP panel, this function
105 * will return true, and false otherwise.
107 static bool is_edp(struct intel_dp
*intel_dp
)
109 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
111 return intel_dig_port
->base
.type
== INTEL_OUTPUT_EDP
;
114 static struct drm_device
*intel_dp_to_dev(struct intel_dp
*intel_dp
)
116 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
118 return intel_dig_port
->base
.base
.dev
;
121 static struct intel_dp
*intel_attached_dp(struct drm_connector
*connector
)
123 return enc_to_intel_dp(&intel_attached_encoder(connector
)->base
);
126 static void intel_dp_link_down(struct intel_dp
*intel_dp
);
127 static bool edp_panel_vdd_on(struct intel_dp
*intel_dp
);
128 static void edp_panel_vdd_off(struct intel_dp
*intel_dp
, bool sync
);
129 static void vlv_init_panel_power_sequencer(struct intel_dp
*intel_dp
);
130 static void vlv_steal_power_sequencer(struct drm_device
*dev
,
133 static unsigned int intel_dp_unused_lane_mask(int lane_count
)
135 return ~((1 << lane_count
) - 1) & 0xf;
139 intel_dp_max_link_bw(struct intel_dp
*intel_dp
)
141 int max_link_bw
= intel_dp
->dpcd
[DP_MAX_LINK_RATE
];
143 switch (max_link_bw
) {
144 case DP_LINK_BW_1_62
:
149 WARN(1, "invalid max DP link bw val %x, using 1.62Gbps\n",
151 max_link_bw
= DP_LINK_BW_1_62
;
157 static u8
intel_dp_max_lane_count(struct intel_dp
*intel_dp
)
159 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
160 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
161 u8 source_max
, sink_max
;
164 if (HAS_DDI(dev
) && intel_dig_port
->port
== PORT_A
&&
165 (intel_dig_port
->saved_port_bits
& DDI_A_4_LANES
) == 0)
168 sink_max
= drm_dp_max_lane_count(intel_dp
->dpcd
);
170 return min(source_max
, sink_max
);
174 * The units on the numbers in the next two are... bizarre. Examples will
175 * make it clearer; this one parallels an example in the eDP spec.
177 * intel_dp_max_data_rate for one lane of 2.7GHz evaluates as:
179 * 270000 * 1 * 8 / 10 == 216000
181 * The actual data capacity of that configuration is 2.16Gbit/s, so the
182 * units are decakilobits. ->clock in a drm_display_mode is in kilohertz -
183 * or equivalently, kilopixels per second - so for 1680x1050R it'd be
184 * 119000. At 18bpp that's 2142000 kilobits per second.
186 * Thus the strange-looking division by 10 in intel_dp_link_required, to
187 * get the result in decakilobits instead of kilobits.
191 intel_dp_link_required(int pixel_clock
, int bpp
)
193 return (pixel_clock
* bpp
+ 9) / 10;
197 intel_dp_max_data_rate(int max_link_clock
, int max_lanes
)
199 return (max_link_clock
* max_lanes
* 8) / 10;
202 static enum drm_mode_status
203 intel_dp_mode_valid(struct drm_connector
*connector
,
204 struct drm_display_mode
*mode
)
206 struct intel_dp
*intel_dp
= intel_attached_dp(connector
);
207 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
208 struct drm_display_mode
*fixed_mode
= intel_connector
->panel
.fixed_mode
;
209 int target_clock
= mode
->clock
;
210 int max_rate
, mode_rate
, max_lanes
, max_link_clock
;
212 if (is_edp(intel_dp
) && fixed_mode
) {
213 if (mode
->hdisplay
> fixed_mode
->hdisplay
)
216 if (mode
->vdisplay
> fixed_mode
->vdisplay
)
219 target_clock
= fixed_mode
->clock
;
222 max_link_clock
= intel_dp_max_link_rate(intel_dp
);
223 max_lanes
= intel_dp_max_lane_count(intel_dp
);
225 max_rate
= intel_dp_max_data_rate(max_link_clock
, max_lanes
);
226 mode_rate
= intel_dp_link_required(target_clock
, 18);
228 if (mode_rate
> max_rate
)
229 return MODE_CLOCK_HIGH
;
231 if (mode
->clock
< 10000)
232 return MODE_CLOCK_LOW
;
234 if (mode
->flags
& DRM_MODE_FLAG_DBLCLK
)
235 return MODE_H_ILLEGAL
;
240 uint32_t intel_dp_pack_aux(const uint8_t *src
, int src_bytes
)
247 for (i
= 0; i
< src_bytes
; i
++)
248 v
|= ((uint32_t) src
[i
]) << ((3-i
) * 8);
252 static void intel_dp_unpack_aux(uint32_t src
, uint8_t *dst
, int dst_bytes
)
257 for (i
= 0; i
< dst_bytes
; i
++)
258 dst
[i
] = src
>> ((3-i
) * 8);
262 intel_dp_init_panel_power_sequencer(struct drm_device
*dev
,
263 struct intel_dp
*intel_dp
);
265 intel_dp_init_panel_power_sequencer_registers(struct drm_device
*dev
,
266 struct intel_dp
*intel_dp
);
268 static void pps_lock(struct intel_dp
*intel_dp
)
270 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
271 struct intel_encoder
*encoder
= &intel_dig_port
->base
;
272 struct drm_device
*dev
= encoder
->base
.dev
;
273 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
274 enum intel_display_power_domain power_domain
;
277 * See vlv_power_sequencer_reset() why we need
278 * a power domain reference here.
280 power_domain
= intel_display_port_power_domain(encoder
);
281 intel_display_power_get(dev_priv
, power_domain
);
283 mutex_lock(&dev_priv
->pps_mutex
);
286 static void pps_unlock(struct intel_dp
*intel_dp
)
288 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
289 struct intel_encoder
*encoder
= &intel_dig_port
->base
;
290 struct drm_device
*dev
= encoder
->base
.dev
;
291 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
292 enum intel_display_power_domain power_domain
;
294 mutex_unlock(&dev_priv
->pps_mutex
);
296 power_domain
= intel_display_port_power_domain(encoder
);
297 intel_display_power_put(dev_priv
, power_domain
);
301 vlv_power_sequencer_kick(struct intel_dp
*intel_dp
)
303 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
304 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
305 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
306 enum pipe pipe
= intel_dp
->pps_pipe
;
307 bool pll_enabled
, release_cl_override
= false;
308 enum dpio_phy phy
= DPIO_PHY(pipe
);
309 enum dpio_channel ch
= vlv_pipe_to_channel(pipe
);
312 if (WARN(I915_READ(intel_dp
->output_reg
) & DP_PORT_EN
,
313 "skipping pipe %c power seqeuncer kick due to port %c being active\n",
314 pipe_name(pipe
), port_name(intel_dig_port
->port
)))
317 DRM_DEBUG_KMS("kicking pipe %c power sequencer for port %c\n",
318 pipe_name(pipe
), port_name(intel_dig_port
->port
));
320 /* Preserve the BIOS-computed detected bit. This is
321 * supposed to be read-only.
323 DP
= I915_READ(intel_dp
->output_reg
) & DP_DETECTED
;
324 DP
|= DP_VOLTAGE_0_4
| DP_PRE_EMPHASIS_0
;
325 DP
|= DP_PORT_WIDTH(1);
326 DP
|= DP_LINK_TRAIN_PAT_1
;
328 if (IS_CHERRYVIEW(dev
))
329 DP
|= DP_PIPE_SELECT_CHV(pipe
);
330 else if (pipe
== PIPE_B
)
331 DP
|= DP_PIPEB_SELECT
;
333 pll_enabled
= I915_READ(DPLL(pipe
)) & DPLL_VCO_ENABLE
;
336 * The DPLL for the pipe must be enabled for this to work.
337 * So enable temporarily it if it's not already enabled.
340 release_cl_override
= IS_CHERRYVIEW(dev
) &&
341 !chv_phy_powergate_ch(dev_priv
, phy
, ch
, true);
343 vlv_force_pll_on(dev
, pipe
, IS_CHERRYVIEW(dev
) ?
344 &chv_dpll
[0].dpll
: &vlv_dpll
[0].dpll
);
348 * Similar magic as in intel_dp_enable_port().
349 * We _must_ do this port enable + disable trick
350 * to make this power seqeuencer lock onto the port.
351 * Otherwise even VDD force bit won't work.
353 I915_WRITE(intel_dp
->output_reg
, DP
);
354 POSTING_READ(intel_dp
->output_reg
);
356 I915_WRITE(intel_dp
->output_reg
, DP
| DP_PORT_EN
);
357 POSTING_READ(intel_dp
->output_reg
);
359 I915_WRITE(intel_dp
->output_reg
, DP
& ~DP_PORT_EN
);
360 POSTING_READ(intel_dp
->output_reg
);
363 vlv_force_pll_off(dev
, pipe
);
365 if (release_cl_override
)
366 chv_phy_powergate_ch(dev_priv
, phy
, ch
, false);
371 vlv_power_sequencer_pipe(struct intel_dp
*intel_dp
)
373 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
374 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
375 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
376 struct intel_encoder
*encoder
;
377 unsigned int pipes
= (1 << PIPE_A
) | (1 << PIPE_B
);
380 lockdep_assert_held(&dev_priv
->pps_mutex
);
382 /* We should never land here with regular DP ports */
383 WARN_ON(!is_edp(intel_dp
));
385 if (intel_dp
->pps_pipe
!= INVALID_PIPE
)
386 return intel_dp
->pps_pipe
;
389 * We don't have power sequencer currently.
390 * Pick one that's not used by other ports.
392 list_for_each_entry(encoder
, &dev
->mode_config
.encoder_list
,
394 struct intel_dp
*tmp
;
396 if (encoder
->type
!= INTEL_OUTPUT_EDP
)
399 tmp
= enc_to_intel_dp(&encoder
->base
);
401 if (tmp
->pps_pipe
!= INVALID_PIPE
)
402 pipes
&= ~(1 << tmp
->pps_pipe
);
406 * Didn't find one. This should not happen since there
407 * are two power sequencers and up to two eDP ports.
409 if (WARN_ON(pipes
== 0))
412 pipe
= ffs(pipes
) - 1;
414 vlv_steal_power_sequencer(dev
, pipe
);
415 intel_dp
->pps_pipe
= pipe
;
417 DRM_DEBUG_KMS("picked pipe %c power sequencer for port %c\n",
418 pipe_name(intel_dp
->pps_pipe
),
419 port_name(intel_dig_port
->port
));
421 /* init power sequencer on this pipe and port */
422 intel_dp_init_panel_power_sequencer(dev
, intel_dp
);
423 intel_dp_init_panel_power_sequencer_registers(dev
, intel_dp
);
426 * Even vdd force doesn't work until we've made
427 * the power sequencer lock in on the port.
429 vlv_power_sequencer_kick(intel_dp
);
431 return intel_dp
->pps_pipe
;
434 typedef bool (*vlv_pipe_check
)(struct drm_i915_private
*dev_priv
,
437 static bool vlv_pipe_has_pp_on(struct drm_i915_private
*dev_priv
,
440 return I915_READ(VLV_PIPE_PP_STATUS(pipe
)) & PP_ON
;
443 static bool vlv_pipe_has_vdd_on(struct drm_i915_private
*dev_priv
,
446 return I915_READ(VLV_PIPE_PP_CONTROL(pipe
)) & EDP_FORCE_VDD
;
449 static bool vlv_pipe_any(struct drm_i915_private
*dev_priv
,
456 vlv_initial_pps_pipe(struct drm_i915_private
*dev_priv
,
458 vlv_pipe_check pipe_check
)
462 for (pipe
= PIPE_A
; pipe
<= PIPE_B
; pipe
++) {
463 u32 port_sel
= I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe
)) &
464 PANEL_PORT_SELECT_MASK
;
466 if (port_sel
!= PANEL_PORT_SELECT_VLV(port
))
469 if (!pipe_check(dev_priv
, pipe
))
479 vlv_initial_power_sequencer_setup(struct intel_dp
*intel_dp
)
481 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
482 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
483 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
484 enum port port
= intel_dig_port
->port
;
486 lockdep_assert_held(&dev_priv
->pps_mutex
);
488 /* try to find a pipe with this port selected */
489 /* first pick one where the panel is on */
490 intel_dp
->pps_pipe
= vlv_initial_pps_pipe(dev_priv
, port
,
492 /* didn't find one? pick one where vdd is on */
493 if (intel_dp
->pps_pipe
== INVALID_PIPE
)
494 intel_dp
->pps_pipe
= vlv_initial_pps_pipe(dev_priv
, port
,
495 vlv_pipe_has_vdd_on
);
496 /* didn't find one? pick one with just the correct port */
497 if (intel_dp
->pps_pipe
== INVALID_PIPE
)
498 intel_dp
->pps_pipe
= vlv_initial_pps_pipe(dev_priv
, port
,
501 /* didn't find one? just let vlv_power_sequencer_pipe() pick one when needed */
502 if (intel_dp
->pps_pipe
== INVALID_PIPE
) {
503 DRM_DEBUG_KMS("no initial power sequencer for port %c\n",
508 DRM_DEBUG_KMS("initial power sequencer for port %c: pipe %c\n",
509 port_name(port
), pipe_name(intel_dp
->pps_pipe
));
511 intel_dp_init_panel_power_sequencer(dev
, intel_dp
);
512 intel_dp_init_panel_power_sequencer_registers(dev
, intel_dp
);
515 void vlv_power_sequencer_reset(struct drm_i915_private
*dev_priv
)
517 struct drm_device
*dev
= dev_priv
->dev
;
518 struct intel_encoder
*encoder
;
520 if (WARN_ON(!IS_VALLEYVIEW(dev
)))
524 * We can't grab pps_mutex here due to deadlock with power_domain
525 * mutex when power_domain functions are called while holding pps_mutex.
526 * That also means that in order to use pps_pipe the code needs to
527 * hold both a power domain reference and pps_mutex, and the power domain
528 * reference get/put must be done while _not_ holding pps_mutex.
529 * pps_{lock,unlock}() do these steps in the correct order, so one
530 * should use them always.
533 list_for_each_entry(encoder
, &dev
->mode_config
.encoder_list
, base
.head
) {
534 struct intel_dp
*intel_dp
;
536 if (encoder
->type
!= INTEL_OUTPUT_EDP
)
539 intel_dp
= enc_to_intel_dp(&encoder
->base
);
540 intel_dp
->pps_pipe
= INVALID_PIPE
;
544 static u32
_pp_ctrl_reg(struct intel_dp
*intel_dp
)
546 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
549 return BXT_PP_CONTROL(0);
550 else if (HAS_PCH_SPLIT(dev
))
551 return PCH_PP_CONTROL
;
553 return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp
));
556 static u32
_pp_stat_reg(struct intel_dp
*intel_dp
)
558 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
561 return BXT_PP_STATUS(0);
562 else if (HAS_PCH_SPLIT(dev
))
563 return PCH_PP_STATUS
;
565 return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp
));
568 /* Reboot notifier handler to shutdown panel power to guarantee T12 timing
569 This function only applicable when panel PM state is not to be tracked */
570 static int edp_notify_handler(struct notifier_block
*this, unsigned long code
,
573 struct intel_dp
*intel_dp
= container_of(this, typeof(* intel_dp
),
575 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
576 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
578 u32 pp_ctrl_reg
, pp_div_reg
;
580 if (!is_edp(intel_dp
) || code
!= SYS_RESTART
)
585 if (IS_VALLEYVIEW(dev
)) {
586 enum pipe pipe
= vlv_power_sequencer_pipe(intel_dp
);
588 pp_ctrl_reg
= VLV_PIPE_PP_CONTROL(pipe
);
589 pp_div_reg
= VLV_PIPE_PP_DIVISOR(pipe
);
590 pp_div
= I915_READ(pp_div_reg
);
591 pp_div
&= PP_REFERENCE_DIVIDER_MASK
;
593 /* 0x1F write to PP_DIV_REG sets max cycle delay */
594 I915_WRITE(pp_div_reg
, pp_div
| 0x1F);
595 I915_WRITE(pp_ctrl_reg
, PANEL_UNLOCK_REGS
| PANEL_POWER_OFF
);
596 msleep(intel_dp
->panel_power_cycle_delay
);
599 pps_unlock(intel_dp
);
604 static bool edp_have_panel_power(struct intel_dp
*intel_dp
)
606 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
607 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
609 lockdep_assert_held(&dev_priv
->pps_mutex
);
611 if (IS_VALLEYVIEW(dev
) &&
612 intel_dp
->pps_pipe
== INVALID_PIPE
)
615 return (I915_READ(_pp_stat_reg(intel_dp
)) & PP_ON
) != 0;
618 static bool edp_have_panel_vdd(struct intel_dp
*intel_dp
)
620 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
621 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
623 lockdep_assert_held(&dev_priv
->pps_mutex
);
625 if (IS_VALLEYVIEW(dev
) &&
626 intel_dp
->pps_pipe
== INVALID_PIPE
)
629 return I915_READ(_pp_ctrl_reg(intel_dp
)) & EDP_FORCE_VDD
;
633 intel_dp_check_edp(struct intel_dp
*intel_dp
)
635 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
636 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
638 if (!is_edp(intel_dp
))
641 if (!edp_have_panel_power(intel_dp
) && !edp_have_panel_vdd(intel_dp
)) {
642 WARN(1, "eDP powered off while attempting aux channel communication.\n");
643 DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n",
644 I915_READ(_pp_stat_reg(intel_dp
)),
645 I915_READ(_pp_ctrl_reg(intel_dp
)));
650 intel_dp_aux_wait_done(struct intel_dp
*intel_dp
, bool has_aux_irq
)
652 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
653 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
654 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
655 uint32_t ch_ctl
= intel_dp
->aux_ch_ctl_reg
;
659 #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
661 done
= wait_event_timeout(dev_priv
->gmbus_wait_queue
, C
,
662 msecs_to_jiffies_timeout(10));
664 done
= wait_for_atomic(C
, 10) == 0;
666 DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
673 static uint32_t i9xx_get_aux_clock_divider(struct intel_dp
*intel_dp
, int index
)
675 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
676 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
679 * The clock divider is based off the hrawclk, and would like to run at
680 * 2MHz. So, take the hrawclk value and divide by 2 and use that
682 return index
? 0 : intel_hrawclk(dev
) / 2;
685 static uint32_t ilk_get_aux_clock_divider(struct intel_dp
*intel_dp
, int index
)
687 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
688 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
689 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
694 if (intel_dig_port
->port
== PORT_A
) {
695 return DIV_ROUND_UP(dev_priv
->cdclk_freq
, 2000);
698 return DIV_ROUND_UP(intel_pch_rawclk(dev
), 2);
702 static uint32_t hsw_get_aux_clock_divider(struct intel_dp
*intel_dp
, int index
)
704 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
705 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
706 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
708 if (intel_dig_port
->port
== PORT_A
) {
711 return DIV_ROUND_CLOSEST(dev_priv
->cdclk_freq
, 2000);
712 } else if (dev_priv
->pch_id
== INTEL_PCH_LPT_DEVICE_ID_TYPE
) {
713 /* Workaround for non-ULT HSW */
720 return index
? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev
), 2);
724 static uint32_t vlv_get_aux_clock_divider(struct intel_dp
*intel_dp
, int index
)
726 return index
? 0 : 100;
729 static uint32_t skl_get_aux_clock_divider(struct intel_dp
*intel_dp
, int index
)
732 * SKL doesn't need us to program the AUX clock divider (Hardware will
733 * derive the clock from CDCLK automatically). We still implement the
734 * get_aux_clock_divider vfunc to plug-in into the existing code.
736 return index
? 0 : 1;
739 static uint32_t i9xx_get_aux_send_ctl(struct intel_dp
*intel_dp
,
742 uint32_t aux_clock_divider
)
744 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
745 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
746 uint32_t precharge
, timeout
;
753 if (IS_BROADWELL(dev
) && intel_dp
->aux_ch_ctl_reg
== DPA_AUX_CH_CTL
)
754 timeout
= DP_AUX_CH_CTL_TIME_OUT_600us
;
756 timeout
= DP_AUX_CH_CTL_TIME_OUT_400us
;
758 return DP_AUX_CH_CTL_SEND_BUSY
|
760 (has_aux_irq
? DP_AUX_CH_CTL_INTERRUPT
: 0) |
761 DP_AUX_CH_CTL_TIME_OUT_ERROR
|
763 DP_AUX_CH_CTL_RECEIVE_ERROR
|
764 (send_bytes
<< DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT
) |
765 (precharge
<< DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT
) |
766 (aux_clock_divider
<< DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT
);
769 static uint32_t skl_get_aux_send_ctl(struct intel_dp
*intel_dp
,
774 return DP_AUX_CH_CTL_SEND_BUSY
|
776 (has_aux_irq
? DP_AUX_CH_CTL_INTERRUPT
: 0) |
777 DP_AUX_CH_CTL_TIME_OUT_ERROR
|
778 DP_AUX_CH_CTL_TIME_OUT_1600us
|
779 DP_AUX_CH_CTL_RECEIVE_ERROR
|
780 (send_bytes
<< DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT
) |
781 DP_AUX_CH_CTL_SYNC_PULSE_SKL(32);
785 intel_dp_aux_ch(struct intel_dp
*intel_dp
,
786 const uint8_t *send
, int send_bytes
,
787 uint8_t *recv
, int recv_size
)
789 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
790 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
791 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
792 uint32_t ch_ctl
= intel_dp
->aux_ch_ctl_reg
;
793 uint32_t ch_data
= ch_ctl
+ 4;
794 uint32_t aux_clock_divider
;
795 int i
, ret
, recv_bytes
;
798 bool has_aux_irq
= HAS_AUX_IRQ(dev
);
804 * We will be called with VDD already enabled for dpcd/edid/oui reads.
805 * In such cases we want to leave VDD enabled and it's up to upper layers
806 * to turn it off. But for eg. i2c-dev access we need to turn it on/off
809 vdd
= edp_panel_vdd_on(intel_dp
);
811 /* dp aux is extremely sensitive to irq latency, hence request the
812 * lowest possible wakeup latency and so prevent the cpu from going into
815 pm_qos_update_request(&dev_priv
->pm_qos
, 0);
817 intel_dp_check_edp(intel_dp
);
819 intel_aux_display_runtime_get(dev_priv
);
821 /* Try to wait for any previous AUX channel activity */
822 for (try = 0; try < 3; try++) {
823 status
= I915_READ_NOTRACE(ch_ctl
);
824 if ((status
& DP_AUX_CH_CTL_SEND_BUSY
) == 0)
830 static u32 last_status
= -1;
831 const u32 status
= I915_READ(ch_ctl
);
833 if (status
!= last_status
) {
834 WARN(1, "dp_aux_ch not started status 0x%08x\n",
836 last_status
= status
;
843 /* Only 5 data registers! */
844 if (WARN_ON(send_bytes
> 20 || recv_size
> 20)) {
849 while ((aux_clock_divider
= intel_dp
->get_aux_clock_divider(intel_dp
, clock
++))) {
850 u32 send_ctl
= intel_dp
->get_aux_send_ctl(intel_dp
,
855 /* Must try at least 3 times according to DP spec */
856 for (try = 0; try < 5; try++) {
857 /* Load the send data into the aux channel data registers */
858 for (i
= 0; i
< send_bytes
; i
+= 4)
859 I915_WRITE(ch_data
+ i
,
860 intel_dp_pack_aux(send
+ i
,
863 /* Send the command and wait for it to complete */
864 I915_WRITE(ch_ctl
, send_ctl
);
866 status
= intel_dp_aux_wait_done(intel_dp
, has_aux_irq
);
868 /* Clear done status and any errors */
872 DP_AUX_CH_CTL_TIME_OUT_ERROR
|
873 DP_AUX_CH_CTL_RECEIVE_ERROR
);
875 if (status
& DP_AUX_CH_CTL_TIME_OUT_ERROR
)
878 /* DP CTS 1.2 Core Rev 1.1, 4.2.1.1 & 4.2.1.2
879 * 400us delay required for errors and timeouts
880 * Timeout errors from the HW already meet this
881 * requirement so skip to next iteration
883 if (status
& DP_AUX_CH_CTL_RECEIVE_ERROR
) {
884 usleep_range(400, 500);
887 if (status
& DP_AUX_CH_CTL_DONE
)
892 if ((status
& DP_AUX_CH_CTL_DONE
) == 0) {
893 DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status
);
899 /* Check for timeout or receive error.
900 * Timeouts occur when the sink is not connected
902 if (status
& DP_AUX_CH_CTL_RECEIVE_ERROR
) {
903 DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status
);
908 /* Timeouts occur when the device isn't connected, so they're
909 * "normal" -- don't fill the kernel log with these */
910 if (status
& DP_AUX_CH_CTL_TIME_OUT_ERROR
) {
911 DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status
);
916 /* Unload any bytes sent back from the other side */
917 recv_bytes
= ((status
& DP_AUX_CH_CTL_MESSAGE_SIZE_MASK
) >>
918 DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT
);
919 if (recv_bytes
> recv_size
)
920 recv_bytes
= recv_size
;
922 for (i
= 0; i
< recv_bytes
; i
+= 4)
923 intel_dp_unpack_aux(I915_READ(ch_data
+ i
),
924 recv
+ i
, recv_bytes
- i
);
928 pm_qos_update_request(&dev_priv
->pm_qos
, PM_QOS_DEFAULT_VALUE
);
929 intel_aux_display_runtime_put(dev_priv
);
932 edp_panel_vdd_off(intel_dp
, false);
934 pps_unlock(intel_dp
);
939 #define BARE_ADDRESS_SIZE 3
940 #define HEADER_SIZE (BARE_ADDRESS_SIZE + 1)
942 intel_dp_aux_transfer(struct drm_dp_aux
*aux
, struct drm_dp_aux_msg
*msg
)
944 struct intel_dp
*intel_dp
= container_of(aux
, struct intel_dp
, aux
);
945 uint8_t txbuf
[20], rxbuf
[20];
946 size_t txsize
, rxsize
;
949 txbuf
[0] = (msg
->request
<< 4) |
950 ((msg
->address
>> 16) & 0xf);
951 txbuf
[1] = (msg
->address
>> 8) & 0xff;
952 txbuf
[2] = msg
->address
& 0xff;
953 txbuf
[3] = msg
->size
- 1;
955 switch (msg
->request
& ~DP_AUX_I2C_MOT
) {
956 case DP_AUX_NATIVE_WRITE
:
957 case DP_AUX_I2C_WRITE
:
958 case DP_AUX_I2C_WRITE_STATUS_UPDATE
:
959 txsize
= msg
->size
? HEADER_SIZE
+ msg
->size
: BARE_ADDRESS_SIZE
;
960 rxsize
= 2; /* 0 or 1 data bytes */
962 if (WARN_ON(txsize
> 20))
965 memcpy(txbuf
+ HEADER_SIZE
, msg
->buffer
, msg
->size
);
967 ret
= intel_dp_aux_ch(intel_dp
, txbuf
, txsize
, rxbuf
, rxsize
);
969 msg
->reply
= rxbuf
[0] >> 4;
972 /* Number of bytes written in a short write. */
973 ret
= clamp_t(int, rxbuf
[1], 0, msg
->size
);
975 /* Return payload size. */
981 case DP_AUX_NATIVE_READ
:
982 case DP_AUX_I2C_READ
:
983 txsize
= msg
->size
? HEADER_SIZE
: BARE_ADDRESS_SIZE
;
984 rxsize
= msg
->size
+ 1;
986 if (WARN_ON(rxsize
> 20))
989 ret
= intel_dp_aux_ch(intel_dp
, txbuf
, txsize
, rxbuf
, rxsize
);
991 msg
->reply
= rxbuf
[0] >> 4;
993 * Assume happy day, and copy the data. The caller is
994 * expected to check msg->reply before touching it.
996 * Return payload size.
999 memcpy(msg
->buffer
, rxbuf
+ 1, ret
);
1012 intel_dp_aux_init(struct intel_dp
*intel_dp
, struct intel_connector
*connector
)
1014 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1015 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1016 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
1017 enum port port
= intel_dig_port
->port
;
1018 struct ddi_vbt_port_info
*info
= &dev_priv
->vbt
.ddi_port_info
[port
];
1019 const char *name
= NULL
;
1020 uint32_t porte_aux_ctl_reg
= DPA_AUX_CH_CTL
;
1023 /* On SKL we don't have Aux for port E so we rely on VBT to set
1024 * a proper alternate aux channel.
1026 if (IS_SKYLAKE(dev
) && port
== PORT_E
) {
1027 switch (info
->alternate_aux_channel
) {
1029 porte_aux_ctl_reg
= DPB_AUX_CH_CTL
;
1032 porte_aux_ctl_reg
= DPC_AUX_CH_CTL
;
1035 porte_aux_ctl_reg
= DPD_AUX_CH_CTL
;
1039 porte_aux_ctl_reg
= DPA_AUX_CH_CTL
;
1045 intel_dp
->aux_ch_ctl_reg
= DPA_AUX_CH_CTL
;
1049 intel_dp
->aux_ch_ctl_reg
= PCH_DPB_AUX_CH_CTL
;
1053 intel_dp
->aux_ch_ctl_reg
= PCH_DPC_AUX_CH_CTL
;
1057 intel_dp
->aux_ch_ctl_reg
= PCH_DPD_AUX_CH_CTL
;
1061 intel_dp
->aux_ch_ctl_reg
= porte_aux_ctl_reg
;
1069 * The AUX_CTL register is usually DP_CTL + 0x10.
1071 * On Haswell and Broadwell though:
1072 * - Both port A DDI_BUF_CTL and DDI_AUX_CTL are on the CPU
1073 * - Port B/C/D AUX channels are on the PCH, DDI_BUF_CTL on the CPU
1075 * Skylake moves AUX_CTL back next to DDI_BUF_CTL, on the CPU.
1077 if (!IS_HASWELL(dev
) && !IS_BROADWELL(dev
) && port
!= PORT_E
)
1078 intel_dp
->aux_ch_ctl_reg
= intel_dp
->output_reg
+ 0x10;
1080 intel_dp
->aux
.name
= name
;
1081 intel_dp
->aux
.dev
= dev
->dev
;
1082 intel_dp
->aux
.transfer
= intel_dp_aux_transfer
;
1084 DRM_DEBUG_KMS("registering %s bus for %s\n", name
,
1085 connector
->base
.kdev
->kobj
.name
);
1087 ret
= drm_dp_aux_register(&intel_dp
->aux
);
1089 DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
1094 ret
= sysfs_create_link(&connector
->base
.kdev
->kobj
,
1095 &intel_dp
->aux
.ddc
.dev
.kobj
,
1096 intel_dp
->aux
.ddc
.dev
.kobj
.name
);
1098 DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name
, ret
);
1099 drm_dp_aux_unregister(&intel_dp
->aux
);
1104 intel_dp_connector_unregister(struct intel_connector
*intel_connector
)
1106 struct intel_dp
*intel_dp
= intel_attached_dp(&intel_connector
->base
);
1108 if (!intel_connector
->mst_port
)
1109 sysfs_remove_link(&intel_connector
->base
.kdev
->kobj
,
1110 intel_dp
->aux
.ddc
.dev
.kobj
.name
);
1111 intel_connector_unregister(intel_connector
);
1115 skl_edp_set_pll_config(struct intel_crtc_state
*pipe_config
)
1119 memset(&pipe_config
->dpll_hw_state
, 0,
1120 sizeof(pipe_config
->dpll_hw_state
));
1122 pipe_config
->ddi_pll_sel
= SKL_DPLL0
;
1123 pipe_config
->dpll_hw_state
.cfgcr1
= 0;
1124 pipe_config
->dpll_hw_state
.cfgcr2
= 0;
1126 ctrl1
= DPLL_CTRL1_OVERRIDE(SKL_DPLL0
);
1127 switch (pipe_config
->port_clock
/ 2) {
1129 ctrl1
|= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810
,
1133 ctrl1
|= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350
,
1137 ctrl1
|= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700
,
1141 ctrl1
|= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620
,
1144 /* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is 8640 which
1145 results in CDCLK change. Need to handle the change of CDCLK by
1146 disabling pipes and re-enabling them */
1148 ctrl1
|= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080
,
1152 ctrl1
|= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160
,
1157 pipe_config
->dpll_hw_state
.ctrl1
= ctrl1
;
1161 hsw_dp_set_ddi_pll_sel(struct intel_crtc_state
*pipe_config
)
1163 memset(&pipe_config
->dpll_hw_state
, 0,
1164 sizeof(pipe_config
->dpll_hw_state
));
1166 switch (pipe_config
->port_clock
/ 2) {
1168 pipe_config
->ddi_pll_sel
= PORT_CLK_SEL_LCPLL_810
;
1171 pipe_config
->ddi_pll_sel
= PORT_CLK_SEL_LCPLL_1350
;
1174 pipe_config
->ddi_pll_sel
= PORT_CLK_SEL_LCPLL_2700
;
1180 intel_dp_sink_rates(struct intel_dp
*intel_dp
, const int **sink_rates
)
1182 if (intel_dp
->num_sink_rates
) {
1183 *sink_rates
= intel_dp
->sink_rates
;
1184 return intel_dp
->num_sink_rates
;
1187 *sink_rates
= default_rates
;
1189 return (intel_dp_max_link_bw(intel_dp
) >> 3) + 1;
1192 static bool intel_dp_source_supports_hbr2(struct drm_device
*dev
)
1194 /* WaDisableHBR2:skl */
1195 if (IS_SKYLAKE(dev
) && INTEL_REVID(dev
) <= SKL_REVID_B0
)
1198 if ((IS_HASWELL(dev
) && !IS_HSW_ULX(dev
)) || IS_BROADWELL(dev
) ||
1199 (INTEL_INFO(dev
)->gen
>= 9))
1206 intel_dp_source_rates(struct drm_device
*dev
, const int **source_rates
)
1210 if (IS_BROXTON(dev
)) {
1211 *source_rates
= bxt_rates
;
1212 size
= ARRAY_SIZE(bxt_rates
);
1213 } else if (IS_SKYLAKE(dev
)) {
1214 *source_rates
= skl_rates
;
1215 size
= ARRAY_SIZE(skl_rates
);
1217 *source_rates
= default_rates
;
1218 size
= ARRAY_SIZE(default_rates
);
1221 /* This depends on the fact that 5.4 is last value in the array */
1222 if (!intel_dp_source_supports_hbr2(dev
))
1229 intel_dp_set_clock(struct intel_encoder
*encoder
,
1230 struct intel_crtc_state
*pipe_config
)
1232 struct drm_device
*dev
= encoder
->base
.dev
;
1233 const struct dp_link_dpll
*divisor
= NULL
;
1237 divisor
= gen4_dpll
;
1238 count
= ARRAY_SIZE(gen4_dpll
);
1239 } else if (HAS_PCH_SPLIT(dev
)) {
1241 count
= ARRAY_SIZE(pch_dpll
);
1242 } else if (IS_CHERRYVIEW(dev
)) {
1244 count
= ARRAY_SIZE(chv_dpll
);
1245 } else if (IS_VALLEYVIEW(dev
)) {
1247 count
= ARRAY_SIZE(vlv_dpll
);
1250 if (divisor
&& count
) {
1251 for (i
= 0; i
< count
; i
++) {
1252 if (pipe_config
->port_clock
== divisor
[i
].clock
) {
1253 pipe_config
->dpll
= divisor
[i
].dpll
;
1254 pipe_config
->clock_set
= true;
1261 static int intersect_rates(const int *source_rates
, int source_len
,
1262 const int *sink_rates
, int sink_len
,
1265 int i
= 0, j
= 0, k
= 0;
1267 while (i
< source_len
&& j
< sink_len
) {
1268 if (source_rates
[i
] == sink_rates
[j
]) {
1269 if (WARN_ON(k
>= DP_MAX_SUPPORTED_RATES
))
1271 common_rates
[k
] = source_rates
[i
];
1275 } else if (source_rates
[i
] < sink_rates
[j
]) {
1284 static int intel_dp_common_rates(struct intel_dp
*intel_dp
,
1287 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1288 const int *source_rates
, *sink_rates
;
1289 int source_len
, sink_len
;
1291 sink_len
= intel_dp_sink_rates(intel_dp
, &sink_rates
);
1292 source_len
= intel_dp_source_rates(dev
, &source_rates
);
1294 return intersect_rates(source_rates
, source_len
,
1295 sink_rates
, sink_len
,
1299 static void snprintf_int_array(char *str
, size_t len
,
1300 const int *array
, int nelem
)
1306 for (i
= 0; i
< nelem
; i
++) {
1307 int r
= snprintf(str
, len
, "%s%d", i
? ", " : "", array
[i
]);
1315 static void intel_dp_print_rates(struct intel_dp
*intel_dp
)
1317 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1318 const int *source_rates
, *sink_rates
;
1319 int source_len
, sink_len
, common_len
;
1320 int common_rates
[DP_MAX_SUPPORTED_RATES
];
1321 char str
[128]; /* FIXME: too big for stack? */
1323 if ((drm_debug
& DRM_UT_KMS
) == 0)
1326 source_len
= intel_dp_source_rates(dev
, &source_rates
);
1327 snprintf_int_array(str
, sizeof(str
), source_rates
, source_len
);
1328 DRM_DEBUG_KMS("source rates: %s\n", str
);
1330 sink_len
= intel_dp_sink_rates(intel_dp
, &sink_rates
);
1331 snprintf_int_array(str
, sizeof(str
), sink_rates
, sink_len
);
1332 DRM_DEBUG_KMS("sink rates: %s\n", str
);
1334 common_len
= intel_dp_common_rates(intel_dp
, common_rates
);
1335 snprintf_int_array(str
, sizeof(str
), common_rates
, common_len
);
1336 DRM_DEBUG_KMS("common rates: %s\n", str
);
1339 static int rate_to_index(int find
, const int *rates
)
1343 for (i
= 0; i
< DP_MAX_SUPPORTED_RATES
; ++i
)
1344 if (find
== rates
[i
])
1351 intel_dp_max_link_rate(struct intel_dp
*intel_dp
)
1353 int rates
[DP_MAX_SUPPORTED_RATES
] = {};
1356 len
= intel_dp_common_rates(intel_dp
, rates
);
1357 if (WARN_ON(len
<= 0))
1360 return rates
[rate_to_index(0, rates
) - 1];
1363 int intel_dp_rate_select(struct intel_dp
*intel_dp
, int rate
)
1365 return rate_to_index(rate
, intel_dp
->sink_rates
);
1368 static void intel_dp_compute_rate(struct intel_dp
*intel_dp
, int port_clock
,
1369 uint8_t *link_bw
, uint8_t *rate_select
)
1371 if (intel_dp
->num_sink_rates
) {
1374 intel_dp_rate_select(intel_dp
, port_clock
);
1376 *link_bw
= drm_dp_link_rate_to_bw_code(port_clock
);
1382 intel_dp_compute_config(struct intel_encoder
*encoder
,
1383 struct intel_crtc_state
*pipe_config
)
1385 struct drm_device
*dev
= encoder
->base
.dev
;
1386 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1387 struct drm_display_mode
*adjusted_mode
= &pipe_config
->base
.adjusted_mode
;
1388 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
1389 enum port port
= dp_to_dig_port(intel_dp
)->port
;
1390 struct intel_crtc
*intel_crtc
= to_intel_crtc(pipe_config
->base
.crtc
);
1391 struct intel_connector
*intel_connector
= intel_dp
->attached_connector
;
1392 int lane_count
, clock
;
1393 int min_lane_count
= 1;
1394 int max_lane_count
= intel_dp_max_lane_count(intel_dp
);
1395 /* Conveniently, the link BW constants become indices with a shift...*/
1399 int link_avail
, link_clock
;
1400 int common_rates
[DP_MAX_SUPPORTED_RATES
] = {};
1402 uint8_t link_bw
, rate_select
;
1404 common_len
= intel_dp_common_rates(intel_dp
, common_rates
);
1406 /* No common link rates between source and sink */
1407 WARN_ON(common_len
<= 0);
1409 max_clock
= common_len
- 1;
1411 if (HAS_PCH_SPLIT(dev
) && !HAS_DDI(dev
) && port
!= PORT_A
)
1412 pipe_config
->has_pch_encoder
= true;
1414 pipe_config
->has_dp_encoder
= true;
1415 pipe_config
->has_drrs
= false;
1416 pipe_config
->has_audio
= intel_dp
->has_audio
&& port
!= PORT_A
;
1418 if (is_edp(intel_dp
) && intel_connector
->panel
.fixed_mode
) {
1419 intel_fixed_panel_mode(intel_connector
->panel
.fixed_mode
,
1422 if (INTEL_INFO(dev
)->gen
>= 9) {
1424 ret
= skl_update_scaler_crtc(pipe_config
);
1429 if (!HAS_PCH_SPLIT(dev
))
1430 intel_gmch_panel_fitting(intel_crtc
, pipe_config
,
1431 intel_connector
->panel
.fitting_mode
);
1433 intel_pch_panel_fitting(intel_crtc
, pipe_config
,
1434 intel_connector
->panel
.fitting_mode
);
1437 if (adjusted_mode
->flags
& DRM_MODE_FLAG_DBLCLK
)
1440 DRM_DEBUG_KMS("DP link computation with max lane count %i "
1441 "max bw %d pixel clock %iKHz\n",
1442 max_lane_count
, common_rates
[max_clock
],
1443 adjusted_mode
->crtc_clock
);
1445 /* Walk through all bpp values. Luckily they're all nicely spaced with 2
1446 * bpc in between. */
1447 bpp
= pipe_config
->pipe_bpp
;
1448 if (is_edp(intel_dp
)) {
1450 /* Get bpp from vbt only for panels that dont have bpp in edid */
1451 if (intel_connector
->base
.display_info
.bpc
== 0 &&
1452 (dev_priv
->vbt
.edp_bpp
&& dev_priv
->vbt
.edp_bpp
< bpp
)) {
1453 DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n",
1454 dev_priv
->vbt
.edp_bpp
);
1455 bpp
= dev_priv
->vbt
.edp_bpp
;
1459 * Use the maximum clock and number of lanes the eDP panel
1460 * advertizes being capable of. The panels are generally
1461 * designed to support only a single clock and lane
1462 * configuration, and typically these values correspond to the
1463 * native resolution of the panel.
1465 min_lane_count
= max_lane_count
;
1466 min_clock
= max_clock
;
1469 for (; bpp
>= 6*3; bpp
-= 2*3) {
1470 mode_rate
= intel_dp_link_required(adjusted_mode
->crtc_clock
,
1473 for (clock
= min_clock
; clock
<= max_clock
; clock
++) {
1474 for (lane_count
= min_lane_count
;
1475 lane_count
<= max_lane_count
;
1478 link_clock
= common_rates
[clock
];
1479 link_avail
= intel_dp_max_data_rate(link_clock
,
1482 if (mode_rate
<= link_avail
) {
1492 if (intel_dp
->color_range_auto
) {
1495 * CEA-861-E - 5.1 Default Encoding Parameters
1496 * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry
1498 pipe_config
->limited_color_range
=
1499 bpp
!= 18 && drm_match_cea_mode(adjusted_mode
) > 1;
1501 pipe_config
->limited_color_range
=
1502 intel_dp
->limited_color_range
;
1505 pipe_config
->lane_count
= lane_count
;
1507 pipe_config
->pipe_bpp
= bpp
;
1508 pipe_config
->port_clock
= common_rates
[clock
];
1510 intel_dp_compute_rate(intel_dp
, pipe_config
->port_clock
,
1511 &link_bw
, &rate_select
);
1513 DRM_DEBUG_KMS("DP link bw %02x rate select %02x lane count %d clock %d bpp %d\n",
1514 link_bw
, rate_select
, pipe_config
->lane_count
,
1515 pipe_config
->port_clock
, bpp
);
1516 DRM_DEBUG_KMS("DP link bw required %i available %i\n",
1517 mode_rate
, link_avail
);
1519 intel_link_compute_m_n(bpp
, lane_count
,
1520 adjusted_mode
->crtc_clock
,
1521 pipe_config
->port_clock
,
1522 &pipe_config
->dp_m_n
);
1524 if (intel_connector
->panel
.downclock_mode
!= NULL
&&
1525 dev_priv
->drrs
.type
== SEAMLESS_DRRS_SUPPORT
) {
1526 pipe_config
->has_drrs
= true;
1527 intel_link_compute_m_n(bpp
, lane_count
,
1528 intel_connector
->panel
.downclock_mode
->clock
,
1529 pipe_config
->port_clock
,
1530 &pipe_config
->dp_m2_n2
);
1533 if (IS_SKYLAKE(dev
) && is_edp(intel_dp
))
1534 skl_edp_set_pll_config(pipe_config
);
1535 else if (IS_BROXTON(dev
))
1536 /* handled in ddi */;
1537 else if (IS_HASWELL(dev
) || IS_BROADWELL(dev
))
1538 hsw_dp_set_ddi_pll_sel(pipe_config
);
1540 intel_dp_set_clock(encoder
, pipe_config
);
1545 static void ironlake_set_pll_cpu_edp(struct intel_dp
*intel_dp
)
1547 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
1548 struct intel_crtc
*crtc
= to_intel_crtc(dig_port
->base
.base
.crtc
);
1549 struct drm_device
*dev
= crtc
->base
.dev
;
1550 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1553 DRM_DEBUG_KMS("eDP PLL enable for clock %d\n",
1554 crtc
->config
->port_clock
);
1555 dpa_ctl
= I915_READ(DP_A
);
1556 dpa_ctl
&= ~DP_PLL_FREQ_MASK
;
1558 if (crtc
->config
->port_clock
== 162000) {
1559 /* For a long time we've carried around a ILK-DevA w/a for the
1560 * 160MHz clock. If we're really unlucky, it's still required.
1562 DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
1563 dpa_ctl
|= DP_PLL_FREQ_160MHZ
;
1564 intel_dp
->DP
|= DP_PLL_FREQ_160MHZ
;
1566 dpa_ctl
|= DP_PLL_FREQ_270MHZ
;
1567 intel_dp
->DP
|= DP_PLL_FREQ_270MHZ
;
1570 I915_WRITE(DP_A
, dpa_ctl
);
1576 void intel_dp_set_link_params(struct intel_dp
*intel_dp
,
1577 const struct intel_crtc_state
*pipe_config
)
1579 intel_dp
->link_rate
= pipe_config
->port_clock
;
1580 intel_dp
->lane_count
= pipe_config
->lane_count
;
1583 static void intel_dp_prepare(struct intel_encoder
*encoder
)
1585 struct drm_device
*dev
= encoder
->base
.dev
;
1586 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1587 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
1588 enum port port
= dp_to_dig_port(intel_dp
)->port
;
1589 struct intel_crtc
*crtc
= to_intel_crtc(encoder
->base
.crtc
);
1590 const struct drm_display_mode
*adjusted_mode
= &crtc
->config
->base
.adjusted_mode
;
1592 intel_dp_set_link_params(intel_dp
, crtc
->config
);
1595 * There are four kinds of DP registers:
1602 * IBX PCH and CPU are the same for almost everything,
1603 * except that the CPU DP PLL is configured in this
1606 * CPT PCH is quite different, having many bits moved
1607 * to the TRANS_DP_CTL register instead. That
1608 * configuration happens (oddly) in ironlake_pch_enable
1611 /* Preserve the BIOS-computed detected bit. This is
1612 * supposed to be read-only.
1614 intel_dp
->DP
= I915_READ(intel_dp
->output_reg
) & DP_DETECTED
;
1616 /* Handle DP bits in common between all three register formats */
1617 intel_dp
->DP
|= DP_VOLTAGE_0_4
| DP_PRE_EMPHASIS_0
;
1618 intel_dp
->DP
|= DP_PORT_WIDTH(crtc
->config
->lane_count
);
1620 if (crtc
->config
->has_audio
)
1621 intel_dp
->DP
|= DP_AUDIO_OUTPUT_ENABLE
;
1623 /* Split out the IBX/CPU vs CPT settings */
1625 if (IS_GEN7(dev
) && port
== PORT_A
) {
1626 if (adjusted_mode
->flags
& DRM_MODE_FLAG_PHSYNC
)
1627 intel_dp
->DP
|= DP_SYNC_HS_HIGH
;
1628 if (adjusted_mode
->flags
& DRM_MODE_FLAG_PVSYNC
)
1629 intel_dp
->DP
|= DP_SYNC_VS_HIGH
;
1630 intel_dp
->DP
|= DP_LINK_TRAIN_OFF_CPT
;
1632 if (drm_dp_enhanced_frame_cap(intel_dp
->dpcd
))
1633 intel_dp
->DP
|= DP_ENHANCED_FRAMING
;
1635 intel_dp
->DP
|= crtc
->pipe
<< 29;
1636 } else if (HAS_PCH_CPT(dev
) && port
!= PORT_A
) {
1639 intel_dp
->DP
|= DP_LINK_TRAIN_OFF_CPT
;
1641 trans_dp
= I915_READ(TRANS_DP_CTL(crtc
->pipe
));
1642 if (drm_dp_enhanced_frame_cap(intel_dp
->dpcd
))
1643 trans_dp
|= TRANS_DP_ENH_FRAMING
;
1645 trans_dp
&= ~TRANS_DP_ENH_FRAMING
;
1646 I915_WRITE(TRANS_DP_CTL(crtc
->pipe
), trans_dp
);
1648 if (!HAS_PCH_SPLIT(dev
) && !IS_VALLEYVIEW(dev
) &&
1649 crtc
->config
->limited_color_range
)
1650 intel_dp
->DP
|= DP_COLOR_RANGE_16_235
;
1652 if (adjusted_mode
->flags
& DRM_MODE_FLAG_PHSYNC
)
1653 intel_dp
->DP
|= DP_SYNC_HS_HIGH
;
1654 if (adjusted_mode
->flags
& DRM_MODE_FLAG_PVSYNC
)
1655 intel_dp
->DP
|= DP_SYNC_VS_HIGH
;
1656 intel_dp
->DP
|= DP_LINK_TRAIN_OFF
;
1658 if (drm_dp_enhanced_frame_cap(intel_dp
->dpcd
))
1659 intel_dp
->DP
|= DP_ENHANCED_FRAMING
;
1661 if (IS_CHERRYVIEW(dev
))
1662 intel_dp
->DP
|= DP_PIPE_SELECT_CHV(crtc
->pipe
);
1663 else if (crtc
->pipe
== PIPE_B
)
1664 intel_dp
->DP
|= DP_PIPEB_SELECT
;
1668 #define IDLE_ON_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
1669 #define IDLE_ON_VALUE (PP_ON | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE)
1671 #define IDLE_OFF_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | 0)
1672 #define IDLE_OFF_VALUE (0 | PP_SEQUENCE_NONE | 0 | 0)
1674 #define IDLE_CYCLE_MASK (PP_ON | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK)
1675 #define IDLE_CYCLE_VALUE (0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE)
1677 static void wait_panel_status(struct intel_dp
*intel_dp
,
1681 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1682 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1683 u32 pp_stat_reg
, pp_ctrl_reg
;
1685 lockdep_assert_held(&dev_priv
->pps_mutex
);
1687 pp_stat_reg
= _pp_stat_reg(intel_dp
);
1688 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
1690 DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
1692 I915_READ(pp_stat_reg
),
1693 I915_READ(pp_ctrl_reg
));
1695 if (_wait_for((I915_READ(pp_stat_reg
) & mask
) == value
, 5000, 10)) {
1696 DRM_ERROR("Panel status timeout: status %08x control %08x\n",
1697 I915_READ(pp_stat_reg
),
1698 I915_READ(pp_ctrl_reg
));
1701 DRM_DEBUG_KMS("Wait complete\n");
1704 static void wait_panel_on(struct intel_dp
*intel_dp
)
1706 DRM_DEBUG_KMS("Wait for panel power on\n");
1707 wait_panel_status(intel_dp
, IDLE_ON_MASK
, IDLE_ON_VALUE
);
1710 static void wait_panel_off(struct intel_dp
*intel_dp
)
1712 DRM_DEBUG_KMS("Wait for panel power off time\n");
1713 wait_panel_status(intel_dp
, IDLE_OFF_MASK
, IDLE_OFF_VALUE
);
1716 static void wait_panel_power_cycle(struct intel_dp
*intel_dp
)
1718 DRM_DEBUG_KMS("Wait for panel power cycle\n");
1720 /* When we disable the VDD override bit last we have to do the manual
1722 wait_remaining_ms_from_jiffies(intel_dp
->last_power_cycle
,
1723 intel_dp
->panel_power_cycle_delay
);
1725 wait_panel_status(intel_dp
, IDLE_CYCLE_MASK
, IDLE_CYCLE_VALUE
);
1728 static void wait_backlight_on(struct intel_dp
*intel_dp
)
1730 wait_remaining_ms_from_jiffies(intel_dp
->last_power_on
,
1731 intel_dp
->backlight_on_delay
);
1734 static void edp_wait_backlight_off(struct intel_dp
*intel_dp
)
1736 wait_remaining_ms_from_jiffies(intel_dp
->last_backlight_off
,
1737 intel_dp
->backlight_off_delay
);
1740 /* Read the current pp_control value, unlocking the register if it
1744 static u32
ironlake_get_pp_control(struct intel_dp
*intel_dp
)
1746 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1747 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1750 lockdep_assert_held(&dev_priv
->pps_mutex
);
1752 control
= I915_READ(_pp_ctrl_reg(intel_dp
));
1753 if (!IS_BROXTON(dev
)) {
1754 control
&= ~PANEL_UNLOCK_MASK
;
1755 control
|= PANEL_UNLOCK_REGS
;
1761 * Must be paired with edp_panel_vdd_off().
1762 * Must hold pps_mutex around the whole on/off sequence.
1763 * Can be nested with intel_edp_panel_vdd_{on,off}() calls.
1765 static bool edp_panel_vdd_on(struct intel_dp
*intel_dp
)
1767 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1768 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
1769 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
1770 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1771 enum intel_display_power_domain power_domain
;
1773 u32 pp_stat_reg
, pp_ctrl_reg
;
1774 bool need_to_disable
= !intel_dp
->want_panel_vdd
;
1776 lockdep_assert_held(&dev_priv
->pps_mutex
);
1778 if (!is_edp(intel_dp
))
1781 cancel_delayed_work(&intel_dp
->panel_vdd_work
);
1782 intel_dp
->want_panel_vdd
= true;
1784 if (edp_have_panel_vdd(intel_dp
))
1785 return need_to_disable
;
1787 power_domain
= intel_display_port_power_domain(intel_encoder
);
1788 intel_display_power_get(dev_priv
, power_domain
);
1790 DRM_DEBUG_KMS("Turning eDP port %c VDD on\n",
1791 port_name(intel_dig_port
->port
));
1793 if (!edp_have_panel_power(intel_dp
))
1794 wait_panel_power_cycle(intel_dp
);
1796 pp
= ironlake_get_pp_control(intel_dp
);
1797 pp
|= EDP_FORCE_VDD
;
1799 pp_stat_reg
= _pp_stat_reg(intel_dp
);
1800 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
1802 I915_WRITE(pp_ctrl_reg
, pp
);
1803 POSTING_READ(pp_ctrl_reg
);
1804 DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
1805 I915_READ(pp_stat_reg
), I915_READ(pp_ctrl_reg
));
1807 * If the panel wasn't on, delay before accessing aux channel
1809 if (!edp_have_panel_power(intel_dp
)) {
1810 DRM_DEBUG_KMS("eDP port %c panel power wasn't enabled\n",
1811 port_name(intel_dig_port
->port
));
1812 msleep(intel_dp
->panel_power_up_delay
);
1815 return need_to_disable
;
1819 * Must be paired with intel_edp_panel_vdd_off() or
1820 * intel_edp_panel_off().
1821 * Nested calls to these functions are not allowed since
1822 * we drop the lock. Caller must use some higher level
1823 * locking to prevent nested calls from other threads.
1825 void intel_edp_panel_vdd_on(struct intel_dp
*intel_dp
)
1829 if (!is_edp(intel_dp
))
1833 vdd
= edp_panel_vdd_on(intel_dp
);
1834 pps_unlock(intel_dp
);
1836 I915_STATE_WARN(!vdd
, "eDP port %c VDD already requested on\n",
1837 port_name(dp_to_dig_port(intel_dp
)->port
));
1840 static void edp_panel_vdd_off_sync(struct intel_dp
*intel_dp
)
1842 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1843 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1844 struct intel_digital_port
*intel_dig_port
=
1845 dp_to_dig_port(intel_dp
);
1846 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
1847 enum intel_display_power_domain power_domain
;
1849 u32 pp_stat_reg
, pp_ctrl_reg
;
1851 lockdep_assert_held(&dev_priv
->pps_mutex
);
1853 WARN_ON(intel_dp
->want_panel_vdd
);
1855 if (!edp_have_panel_vdd(intel_dp
))
1858 DRM_DEBUG_KMS("Turning eDP port %c VDD off\n",
1859 port_name(intel_dig_port
->port
));
1861 pp
= ironlake_get_pp_control(intel_dp
);
1862 pp
&= ~EDP_FORCE_VDD
;
1864 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
1865 pp_stat_reg
= _pp_stat_reg(intel_dp
);
1867 I915_WRITE(pp_ctrl_reg
, pp
);
1868 POSTING_READ(pp_ctrl_reg
);
1870 /* Make sure sequencer is idle before allowing subsequent activity */
1871 DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
1872 I915_READ(pp_stat_reg
), I915_READ(pp_ctrl_reg
));
1874 if ((pp
& POWER_TARGET_ON
) == 0)
1875 intel_dp
->last_power_cycle
= jiffies
;
1877 power_domain
= intel_display_port_power_domain(intel_encoder
);
1878 intel_display_power_put(dev_priv
, power_domain
);
1881 static void edp_panel_vdd_work(struct work_struct
*__work
)
1883 struct intel_dp
*intel_dp
= container_of(to_delayed_work(__work
),
1884 struct intel_dp
, panel_vdd_work
);
1887 if (!intel_dp
->want_panel_vdd
)
1888 edp_panel_vdd_off_sync(intel_dp
);
1889 pps_unlock(intel_dp
);
1892 static void edp_panel_vdd_schedule_off(struct intel_dp
*intel_dp
)
1894 unsigned long delay
;
1897 * Queue the timer to fire a long time from now (relative to the power
1898 * down delay) to keep the panel power up across a sequence of
1901 delay
= msecs_to_jiffies(intel_dp
->panel_power_cycle_delay
* 5);
1902 schedule_delayed_work(&intel_dp
->panel_vdd_work
, delay
);
1906 * Must be paired with edp_panel_vdd_on().
1907 * Must hold pps_mutex around the whole on/off sequence.
1908 * Can be nested with intel_edp_panel_vdd_{on,off}() calls.
1910 static void edp_panel_vdd_off(struct intel_dp
*intel_dp
, bool sync
)
1912 struct drm_i915_private
*dev_priv
=
1913 intel_dp_to_dev(intel_dp
)->dev_private
;
1915 lockdep_assert_held(&dev_priv
->pps_mutex
);
1917 if (!is_edp(intel_dp
))
1920 I915_STATE_WARN(!intel_dp
->want_panel_vdd
, "eDP port %c VDD not forced on",
1921 port_name(dp_to_dig_port(intel_dp
)->port
));
1923 intel_dp
->want_panel_vdd
= false;
1926 edp_panel_vdd_off_sync(intel_dp
);
1928 edp_panel_vdd_schedule_off(intel_dp
);
1931 static void edp_panel_on(struct intel_dp
*intel_dp
)
1933 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1934 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1938 lockdep_assert_held(&dev_priv
->pps_mutex
);
1940 if (!is_edp(intel_dp
))
1943 DRM_DEBUG_KMS("Turn eDP port %c panel power on\n",
1944 port_name(dp_to_dig_port(intel_dp
)->port
));
1946 if (WARN(edp_have_panel_power(intel_dp
),
1947 "eDP port %c panel power already on\n",
1948 port_name(dp_to_dig_port(intel_dp
)->port
)))
1951 wait_panel_power_cycle(intel_dp
);
1953 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
1954 pp
= ironlake_get_pp_control(intel_dp
);
1956 /* ILK workaround: disable reset around power sequence */
1957 pp
&= ~PANEL_POWER_RESET
;
1958 I915_WRITE(pp_ctrl_reg
, pp
);
1959 POSTING_READ(pp_ctrl_reg
);
1962 pp
|= POWER_TARGET_ON
;
1964 pp
|= PANEL_POWER_RESET
;
1966 I915_WRITE(pp_ctrl_reg
, pp
);
1967 POSTING_READ(pp_ctrl_reg
);
1969 wait_panel_on(intel_dp
);
1970 intel_dp
->last_power_on
= jiffies
;
1973 pp
|= PANEL_POWER_RESET
; /* restore panel reset bit */
1974 I915_WRITE(pp_ctrl_reg
, pp
);
1975 POSTING_READ(pp_ctrl_reg
);
1979 void intel_edp_panel_on(struct intel_dp
*intel_dp
)
1981 if (!is_edp(intel_dp
))
1985 edp_panel_on(intel_dp
);
1986 pps_unlock(intel_dp
);
1990 static void edp_panel_off(struct intel_dp
*intel_dp
)
1992 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
1993 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
1994 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1995 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1996 enum intel_display_power_domain power_domain
;
2000 lockdep_assert_held(&dev_priv
->pps_mutex
);
2002 if (!is_edp(intel_dp
))
2005 DRM_DEBUG_KMS("Turn eDP port %c panel power off\n",
2006 port_name(dp_to_dig_port(intel_dp
)->port
));
2008 WARN(!intel_dp
->want_panel_vdd
, "Need eDP port %c VDD to turn off panel\n",
2009 port_name(dp_to_dig_port(intel_dp
)->port
));
2011 pp
= ironlake_get_pp_control(intel_dp
);
2012 /* We need to switch off panel power _and_ force vdd, for otherwise some
2013 * panels get very unhappy and cease to work. */
2014 pp
&= ~(POWER_TARGET_ON
| PANEL_POWER_RESET
| EDP_FORCE_VDD
|
2017 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
2019 intel_dp
->want_panel_vdd
= false;
2021 I915_WRITE(pp_ctrl_reg
, pp
);
2022 POSTING_READ(pp_ctrl_reg
);
2024 intel_dp
->last_power_cycle
= jiffies
;
2025 wait_panel_off(intel_dp
);
2027 /* We got a reference when we enabled the VDD. */
2028 power_domain
= intel_display_port_power_domain(intel_encoder
);
2029 intel_display_power_put(dev_priv
, power_domain
);
2032 void intel_edp_panel_off(struct intel_dp
*intel_dp
)
2034 if (!is_edp(intel_dp
))
2038 edp_panel_off(intel_dp
);
2039 pps_unlock(intel_dp
);
2042 /* Enable backlight in the panel power control. */
2043 static void _intel_edp_backlight_on(struct intel_dp
*intel_dp
)
2045 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
2046 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
2047 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2052 * If we enable the backlight right away following a panel power
2053 * on, we may see slight flicker as the panel syncs with the eDP
2054 * link. So delay a bit to make sure the image is solid before
2055 * allowing it to appear.
2057 wait_backlight_on(intel_dp
);
2061 pp
= ironlake_get_pp_control(intel_dp
);
2062 pp
|= EDP_BLC_ENABLE
;
2064 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
2066 I915_WRITE(pp_ctrl_reg
, pp
);
2067 POSTING_READ(pp_ctrl_reg
);
2069 pps_unlock(intel_dp
);
2072 /* Enable backlight PWM and backlight PP control. */
2073 void intel_edp_backlight_on(struct intel_dp
*intel_dp
)
2075 if (!is_edp(intel_dp
))
2078 DRM_DEBUG_KMS("\n");
2080 intel_panel_enable_backlight(intel_dp
->attached_connector
);
2081 _intel_edp_backlight_on(intel_dp
);
2084 /* Disable backlight in the panel power control. */
2085 static void _intel_edp_backlight_off(struct intel_dp
*intel_dp
)
2087 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
2088 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2092 if (!is_edp(intel_dp
))
2097 pp
= ironlake_get_pp_control(intel_dp
);
2098 pp
&= ~EDP_BLC_ENABLE
;
2100 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
2102 I915_WRITE(pp_ctrl_reg
, pp
);
2103 POSTING_READ(pp_ctrl_reg
);
2105 pps_unlock(intel_dp
);
2107 intel_dp
->last_backlight_off
= jiffies
;
2108 edp_wait_backlight_off(intel_dp
);
2111 /* Disable backlight PP control and backlight PWM. */
2112 void intel_edp_backlight_off(struct intel_dp
*intel_dp
)
2114 if (!is_edp(intel_dp
))
2117 DRM_DEBUG_KMS("\n");
2119 _intel_edp_backlight_off(intel_dp
);
2120 intel_panel_disable_backlight(intel_dp
->attached_connector
);
2124 * Hook for controlling the panel power control backlight through the bl_power
2125 * sysfs attribute. Take care to handle multiple calls.
2127 static void intel_edp_backlight_power(struct intel_connector
*connector
,
2130 struct intel_dp
*intel_dp
= intel_attached_dp(&connector
->base
);
2134 is_enabled
= ironlake_get_pp_control(intel_dp
) & EDP_BLC_ENABLE
;
2135 pps_unlock(intel_dp
);
2137 if (is_enabled
== enable
)
2140 DRM_DEBUG_KMS("panel power control backlight %s\n",
2141 enable
? "enable" : "disable");
2144 _intel_edp_backlight_on(intel_dp
);
2146 _intel_edp_backlight_off(intel_dp
);
2149 static void ironlake_edp_pll_on(struct intel_dp
*intel_dp
)
2151 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
2152 struct drm_crtc
*crtc
= intel_dig_port
->base
.base
.crtc
;
2153 struct drm_device
*dev
= crtc
->dev
;
2154 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2157 assert_pipe_disabled(dev_priv
,
2158 to_intel_crtc(crtc
)->pipe
);
2160 DRM_DEBUG_KMS("\n");
2161 dpa_ctl
= I915_READ(DP_A
);
2162 WARN(dpa_ctl
& DP_PLL_ENABLE
, "dp pll on, should be off\n");
2163 WARN(dpa_ctl
& DP_PORT_EN
, "dp port still on, should be off\n");
2165 /* We don't adjust intel_dp->DP while tearing down the link, to
2166 * facilitate link retraining (e.g. after hotplug). Hence clear all
2167 * enable bits here to ensure that we don't enable too much. */
2168 intel_dp
->DP
&= ~(DP_PORT_EN
| DP_AUDIO_OUTPUT_ENABLE
);
2169 intel_dp
->DP
|= DP_PLL_ENABLE
;
2170 I915_WRITE(DP_A
, intel_dp
->DP
);
2175 static void ironlake_edp_pll_off(struct intel_dp
*intel_dp
)
2177 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
2178 struct drm_crtc
*crtc
= intel_dig_port
->base
.base
.crtc
;
2179 struct drm_device
*dev
= crtc
->dev
;
2180 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2183 assert_pipe_disabled(dev_priv
,
2184 to_intel_crtc(crtc
)->pipe
);
2186 dpa_ctl
= I915_READ(DP_A
);
2187 WARN((dpa_ctl
& DP_PLL_ENABLE
) == 0,
2188 "dp pll off, should be on\n");
2189 WARN(dpa_ctl
& DP_PORT_EN
, "dp port still on, should be off\n");
2191 /* We can't rely on the value tracked for the DP register in
2192 * intel_dp->DP because link_down must not change that (otherwise link
2193 * re-training will fail. */
2194 dpa_ctl
&= ~DP_PLL_ENABLE
;
2195 I915_WRITE(DP_A
, dpa_ctl
);
2200 /* If the sink supports it, try to set the power state appropriately */
2201 void intel_dp_sink_dpms(struct intel_dp
*intel_dp
, int mode
)
2205 /* Should have a valid DPCD by this point */
2206 if (intel_dp
->dpcd
[DP_DPCD_REV
] < 0x11)
2209 if (mode
!= DRM_MODE_DPMS_ON
) {
2210 ret
= drm_dp_dpcd_writeb(&intel_dp
->aux
, DP_SET_POWER
,
2214 * When turning on, we need to retry for 1ms to give the sink
2217 for (i
= 0; i
< 3; i
++) {
2218 ret
= drm_dp_dpcd_writeb(&intel_dp
->aux
, DP_SET_POWER
,
2227 DRM_DEBUG_KMS("failed to %s sink power state\n",
2228 mode
== DRM_MODE_DPMS_ON
? "enable" : "disable");
2231 static bool intel_dp_get_hw_state(struct intel_encoder
*encoder
,
2234 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2235 enum port port
= dp_to_dig_port(intel_dp
)->port
;
2236 struct drm_device
*dev
= encoder
->base
.dev
;
2237 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2238 enum intel_display_power_domain power_domain
;
2241 power_domain
= intel_display_port_power_domain(encoder
);
2242 if (!intel_display_power_is_enabled(dev_priv
, power_domain
))
2245 tmp
= I915_READ(intel_dp
->output_reg
);
2247 if (!(tmp
& DP_PORT_EN
))
2250 if (IS_GEN7(dev
) && port
== PORT_A
) {
2251 *pipe
= PORT_TO_PIPE_CPT(tmp
);
2252 } else if (HAS_PCH_CPT(dev
) && port
!= PORT_A
) {
2255 for_each_pipe(dev_priv
, p
) {
2256 u32 trans_dp
= I915_READ(TRANS_DP_CTL(p
));
2257 if (TRANS_DP_PIPE_TO_PORT(trans_dp
) == port
) {
2263 DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n",
2264 intel_dp
->output_reg
);
2265 } else if (IS_CHERRYVIEW(dev
)) {
2266 *pipe
= DP_PORT_TO_PIPE_CHV(tmp
);
2268 *pipe
= PORT_TO_PIPE(tmp
);
2274 static void intel_dp_get_config(struct intel_encoder
*encoder
,
2275 struct intel_crtc_state
*pipe_config
)
2277 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2279 struct drm_device
*dev
= encoder
->base
.dev
;
2280 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2281 enum port port
= dp_to_dig_port(intel_dp
)->port
;
2282 struct intel_crtc
*crtc
= to_intel_crtc(encoder
->base
.crtc
);
2285 tmp
= I915_READ(intel_dp
->output_reg
);
2287 pipe_config
->has_audio
= tmp
& DP_AUDIO_OUTPUT_ENABLE
&& port
!= PORT_A
;
2289 if (HAS_PCH_CPT(dev
) && port
!= PORT_A
) {
2290 u32 trans_dp
= I915_READ(TRANS_DP_CTL(crtc
->pipe
));
2292 if (trans_dp
& TRANS_DP_HSYNC_ACTIVE_HIGH
)
2293 flags
|= DRM_MODE_FLAG_PHSYNC
;
2295 flags
|= DRM_MODE_FLAG_NHSYNC
;
2297 if (trans_dp
& TRANS_DP_VSYNC_ACTIVE_HIGH
)
2298 flags
|= DRM_MODE_FLAG_PVSYNC
;
2300 flags
|= DRM_MODE_FLAG_NVSYNC
;
2302 if (tmp
& DP_SYNC_HS_HIGH
)
2303 flags
|= DRM_MODE_FLAG_PHSYNC
;
2305 flags
|= DRM_MODE_FLAG_NHSYNC
;
2307 if (tmp
& DP_SYNC_VS_HIGH
)
2308 flags
|= DRM_MODE_FLAG_PVSYNC
;
2310 flags
|= DRM_MODE_FLAG_NVSYNC
;
2313 pipe_config
->base
.adjusted_mode
.flags
|= flags
;
2315 if (!HAS_PCH_SPLIT(dev
) && !IS_VALLEYVIEW(dev
) &&
2316 tmp
& DP_COLOR_RANGE_16_235
)
2317 pipe_config
->limited_color_range
= true;
2319 pipe_config
->has_dp_encoder
= true;
2321 pipe_config
->lane_count
=
2322 ((tmp
& DP_PORT_WIDTH_MASK
) >> DP_PORT_WIDTH_SHIFT
) + 1;
2324 intel_dp_get_m_n(crtc
, pipe_config
);
2326 if (port
== PORT_A
) {
2327 if ((I915_READ(DP_A
) & DP_PLL_FREQ_MASK
) == DP_PLL_FREQ_160MHZ
)
2328 pipe_config
->port_clock
= 162000;
2330 pipe_config
->port_clock
= 270000;
2333 dotclock
= intel_dotclock_calculate(pipe_config
->port_clock
,
2334 &pipe_config
->dp_m_n
);
2336 if (HAS_PCH_SPLIT(dev_priv
->dev
) && port
!= PORT_A
)
2337 ironlake_check_encoder_dotclock(pipe_config
, dotclock
);
2339 pipe_config
->base
.adjusted_mode
.crtc_clock
= dotclock
;
2341 if (is_edp(intel_dp
) && dev_priv
->vbt
.edp_bpp
&&
2342 pipe_config
->pipe_bpp
> dev_priv
->vbt
.edp_bpp
) {
2344 * This is a big fat ugly hack.
2346 * Some machines in UEFI boot mode provide us a VBT that has 18
2347 * bpp and 1.62 GHz link bandwidth for eDP, which for reasons
2348 * unknown we fail to light up. Yet the same BIOS boots up with
2349 * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
2350 * max, not what it tells us to use.
2352 * Note: This will still be broken if the eDP panel is not lit
2353 * up by the BIOS, and thus we can't get the mode at module
2356 DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
2357 pipe_config
->pipe_bpp
, dev_priv
->vbt
.edp_bpp
);
2358 dev_priv
->vbt
.edp_bpp
= pipe_config
->pipe_bpp
;
2362 static void intel_disable_dp(struct intel_encoder
*encoder
)
2364 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2365 struct drm_device
*dev
= encoder
->base
.dev
;
2366 struct intel_crtc
*crtc
= to_intel_crtc(encoder
->base
.crtc
);
2368 if (crtc
->config
->has_audio
)
2369 intel_audio_codec_disable(encoder
);
2371 if (HAS_PSR(dev
) && !HAS_DDI(dev
))
2372 intel_psr_disable(intel_dp
);
2374 /* Make sure the panel is off before trying to change the mode. But also
2375 * ensure that we have vdd while we switch off the panel. */
2376 intel_edp_panel_vdd_on(intel_dp
);
2377 intel_edp_backlight_off(intel_dp
);
2378 intel_dp_sink_dpms(intel_dp
, DRM_MODE_DPMS_OFF
);
2379 intel_edp_panel_off(intel_dp
);
2381 /* disable the port before the pipe on g4x */
2382 if (INTEL_INFO(dev
)->gen
< 5)
2383 intel_dp_link_down(intel_dp
);
2386 static void ilk_post_disable_dp(struct intel_encoder
*encoder
)
2388 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2389 enum port port
= dp_to_dig_port(intel_dp
)->port
;
2391 intel_dp_link_down(intel_dp
);
2393 ironlake_edp_pll_off(intel_dp
);
2396 static void vlv_post_disable_dp(struct intel_encoder
*encoder
)
2398 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2400 intel_dp_link_down(intel_dp
);
2403 static void chv_data_lane_soft_reset(struct intel_encoder
*encoder
,
2406 struct drm_i915_private
*dev_priv
= to_i915(encoder
->base
.dev
);
2407 enum dpio_channel ch
= vlv_dport_to_channel(enc_to_dig_port(&encoder
->base
));
2408 struct intel_crtc
*crtc
= to_intel_crtc(encoder
->base
.crtc
);
2409 enum pipe pipe
= crtc
->pipe
;
2412 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW0(ch
));
2414 val
&= ~(DPIO_PCS_TX_LANE2_RESET
| DPIO_PCS_TX_LANE1_RESET
);
2416 val
|= DPIO_PCS_TX_LANE2_RESET
| DPIO_PCS_TX_LANE1_RESET
;
2417 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW0(ch
), val
);
2419 if (crtc
->config
->lane_count
> 2) {
2420 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW0(ch
));
2422 val
&= ~(DPIO_PCS_TX_LANE2_RESET
| DPIO_PCS_TX_LANE1_RESET
);
2424 val
|= DPIO_PCS_TX_LANE2_RESET
| DPIO_PCS_TX_LANE1_RESET
;
2425 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW0(ch
), val
);
2428 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW1(ch
));
2429 val
|= CHV_PCS_REQ_SOFTRESET_EN
;
2431 val
&= ~DPIO_PCS_CLK_SOFT_RESET
;
2433 val
|= DPIO_PCS_CLK_SOFT_RESET
;
2434 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW1(ch
), val
);
2436 if (crtc
->config
->lane_count
> 2) {
2437 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW1(ch
));
2438 val
|= CHV_PCS_REQ_SOFTRESET_EN
;
2440 val
&= ~DPIO_PCS_CLK_SOFT_RESET
;
2442 val
|= DPIO_PCS_CLK_SOFT_RESET
;
2443 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW1(ch
), val
);
2447 static void chv_post_disable_dp(struct intel_encoder
*encoder
)
2449 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2450 struct drm_device
*dev
= encoder
->base
.dev
;
2451 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2453 intel_dp_link_down(intel_dp
);
2455 mutex_lock(&dev_priv
->sb_lock
);
2457 /* Assert data lane reset */
2458 chv_data_lane_soft_reset(encoder
, true);
2460 mutex_unlock(&dev_priv
->sb_lock
);
2464 _intel_dp_set_link_train(struct intel_dp
*intel_dp
,
2466 uint8_t dp_train_pat
)
2468 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
2469 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
2470 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2471 enum port port
= intel_dig_port
->port
;
2474 uint32_t temp
= I915_READ(DP_TP_CTL(port
));
2476 if (dp_train_pat
& DP_LINK_SCRAMBLING_DISABLE
)
2477 temp
|= DP_TP_CTL_SCRAMBLE_DISABLE
;
2479 temp
&= ~DP_TP_CTL_SCRAMBLE_DISABLE
;
2481 temp
&= ~DP_TP_CTL_LINK_TRAIN_MASK
;
2482 switch (dp_train_pat
& DP_TRAINING_PATTERN_MASK
) {
2483 case DP_TRAINING_PATTERN_DISABLE
:
2484 temp
|= DP_TP_CTL_LINK_TRAIN_NORMAL
;
2487 case DP_TRAINING_PATTERN_1
:
2488 temp
|= DP_TP_CTL_LINK_TRAIN_PAT1
;
2490 case DP_TRAINING_PATTERN_2
:
2491 temp
|= DP_TP_CTL_LINK_TRAIN_PAT2
;
2493 case DP_TRAINING_PATTERN_3
:
2494 temp
|= DP_TP_CTL_LINK_TRAIN_PAT3
;
2497 I915_WRITE(DP_TP_CTL(port
), temp
);
2499 } else if ((IS_GEN7(dev
) && port
== PORT_A
) ||
2500 (HAS_PCH_CPT(dev
) && port
!= PORT_A
)) {
2501 *DP
&= ~DP_LINK_TRAIN_MASK_CPT
;
2503 switch (dp_train_pat
& DP_TRAINING_PATTERN_MASK
) {
2504 case DP_TRAINING_PATTERN_DISABLE
:
2505 *DP
|= DP_LINK_TRAIN_OFF_CPT
;
2507 case DP_TRAINING_PATTERN_1
:
2508 *DP
|= DP_LINK_TRAIN_PAT_1_CPT
;
2510 case DP_TRAINING_PATTERN_2
:
2511 *DP
|= DP_LINK_TRAIN_PAT_2_CPT
;
2513 case DP_TRAINING_PATTERN_3
:
2514 DRM_ERROR("DP training pattern 3 not supported\n");
2515 *DP
|= DP_LINK_TRAIN_PAT_2_CPT
;
2520 if (IS_CHERRYVIEW(dev
))
2521 *DP
&= ~DP_LINK_TRAIN_MASK_CHV
;
2523 *DP
&= ~DP_LINK_TRAIN_MASK
;
2525 switch (dp_train_pat
& DP_TRAINING_PATTERN_MASK
) {
2526 case DP_TRAINING_PATTERN_DISABLE
:
2527 *DP
|= DP_LINK_TRAIN_OFF
;
2529 case DP_TRAINING_PATTERN_1
:
2530 *DP
|= DP_LINK_TRAIN_PAT_1
;
2532 case DP_TRAINING_PATTERN_2
:
2533 *DP
|= DP_LINK_TRAIN_PAT_2
;
2535 case DP_TRAINING_PATTERN_3
:
2536 if (IS_CHERRYVIEW(dev
)) {
2537 *DP
|= DP_LINK_TRAIN_PAT_3_CHV
;
2539 DRM_ERROR("DP training pattern 3 not supported\n");
2540 *DP
|= DP_LINK_TRAIN_PAT_2
;
2547 static void intel_dp_enable_port(struct intel_dp
*intel_dp
)
2549 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
2550 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2552 /* enable with pattern 1 (as per spec) */
2553 _intel_dp_set_link_train(intel_dp
, &intel_dp
->DP
,
2554 DP_TRAINING_PATTERN_1
);
2556 I915_WRITE(intel_dp
->output_reg
, intel_dp
->DP
);
2557 POSTING_READ(intel_dp
->output_reg
);
2560 * Magic for VLV/CHV. We _must_ first set up the register
2561 * without actually enabling the port, and then do another
2562 * write to enable the port. Otherwise link training will
2563 * fail when the power sequencer is freshly used for this port.
2565 intel_dp
->DP
|= DP_PORT_EN
;
2567 I915_WRITE(intel_dp
->output_reg
, intel_dp
->DP
);
2568 POSTING_READ(intel_dp
->output_reg
);
2571 static void intel_enable_dp(struct intel_encoder
*encoder
)
2573 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2574 struct drm_device
*dev
= encoder
->base
.dev
;
2575 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2576 struct intel_crtc
*crtc
= to_intel_crtc(encoder
->base
.crtc
);
2577 uint32_t dp_reg
= I915_READ(intel_dp
->output_reg
);
2579 if (WARN_ON(dp_reg
& DP_PORT_EN
))
2584 if (IS_VALLEYVIEW(dev
))
2585 vlv_init_panel_power_sequencer(intel_dp
);
2587 intel_dp_enable_port(intel_dp
);
2589 edp_panel_vdd_on(intel_dp
);
2590 edp_panel_on(intel_dp
);
2591 edp_panel_vdd_off(intel_dp
, true);
2593 pps_unlock(intel_dp
);
2595 if (IS_VALLEYVIEW(dev
)) {
2596 unsigned int lane_mask
= 0x0;
2598 if (IS_CHERRYVIEW(dev
))
2599 lane_mask
= intel_dp_unused_lane_mask(crtc
->config
->lane_count
);
2601 vlv_wait_port_ready(dev_priv
, dp_to_dig_port(intel_dp
),
2605 intel_dp_sink_dpms(intel_dp
, DRM_MODE_DPMS_ON
);
2606 intel_dp_start_link_train(intel_dp
);
2607 intel_dp_complete_link_train(intel_dp
);
2608 intel_dp_stop_link_train(intel_dp
);
2610 if (crtc
->config
->has_audio
) {
2611 DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
2612 pipe_name(crtc
->pipe
));
2613 intel_audio_codec_enable(encoder
);
2617 static void g4x_enable_dp(struct intel_encoder
*encoder
)
2619 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2621 intel_enable_dp(encoder
);
2622 intel_edp_backlight_on(intel_dp
);
2625 static void vlv_enable_dp(struct intel_encoder
*encoder
)
2627 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2629 intel_edp_backlight_on(intel_dp
);
2630 intel_psr_enable(intel_dp
);
2633 static void g4x_pre_enable_dp(struct intel_encoder
*encoder
)
2635 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2636 struct intel_digital_port
*dport
= dp_to_dig_port(intel_dp
);
2638 intel_dp_prepare(encoder
);
2640 /* Only ilk+ has port A */
2641 if (dport
->port
== PORT_A
) {
2642 ironlake_set_pll_cpu_edp(intel_dp
);
2643 ironlake_edp_pll_on(intel_dp
);
2647 static void vlv_detach_power_sequencer(struct intel_dp
*intel_dp
)
2649 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
2650 struct drm_i915_private
*dev_priv
= intel_dig_port
->base
.base
.dev
->dev_private
;
2651 enum pipe pipe
= intel_dp
->pps_pipe
;
2652 int pp_on_reg
= VLV_PIPE_PP_ON_DELAYS(pipe
);
2654 edp_panel_vdd_off_sync(intel_dp
);
2657 * VLV seems to get confused when multiple power seqeuencers
2658 * have the same port selected (even if only one has power/vdd
2659 * enabled). The failure manifests as vlv_wait_port_ready() failing
2660 * CHV on the other hand doesn't seem to mind having the same port
2661 * selected in multiple power seqeuencers, but let's clear the
2662 * port select always when logically disconnecting a power sequencer
2665 DRM_DEBUG_KMS("detaching pipe %c power sequencer from port %c\n",
2666 pipe_name(pipe
), port_name(intel_dig_port
->port
));
2667 I915_WRITE(pp_on_reg
, 0);
2668 POSTING_READ(pp_on_reg
);
2670 intel_dp
->pps_pipe
= INVALID_PIPE
;
2673 static void vlv_steal_power_sequencer(struct drm_device
*dev
,
2676 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2677 struct intel_encoder
*encoder
;
2679 lockdep_assert_held(&dev_priv
->pps_mutex
);
2681 if (WARN_ON(pipe
!= PIPE_A
&& pipe
!= PIPE_B
))
2684 list_for_each_entry(encoder
, &dev
->mode_config
.encoder_list
,
2686 struct intel_dp
*intel_dp
;
2689 if (encoder
->type
!= INTEL_OUTPUT_EDP
)
2692 intel_dp
= enc_to_intel_dp(&encoder
->base
);
2693 port
= dp_to_dig_port(intel_dp
)->port
;
2695 if (intel_dp
->pps_pipe
!= pipe
)
2698 DRM_DEBUG_KMS("stealing pipe %c power sequencer from port %c\n",
2699 pipe_name(pipe
), port_name(port
));
2701 WARN(encoder
->base
.crtc
,
2702 "stealing pipe %c power sequencer from active eDP port %c\n",
2703 pipe_name(pipe
), port_name(port
));
2705 /* make sure vdd is off before we steal it */
2706 vlv_detach_power_sequencer(intel_dp
);
2710 static void vlv_init_panel_power_sequencer(struct intel_dp
*intel_dp
)
2712 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
2713 struct intel_encoder
*encoder
= &intel_dig_port
->base
;
2714 struct drm_device
*dev
= encoder
->base
.dev
;
2715 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2716 struct intel_crtc
*crtc
= to_intel_crtc(encoder
->base
.crtc
);
2718 lockdep_assert_held(&dev_priv
->pps_mutex
);
2720 if (!is_edp(intel_dp
))
2723 if (intel_dp
->pps_pipe
== crtc
->pipe
)
2727 * If another power sequencer was being used on this
2728 * port previously make sure to turn off vdd there while
2729 * we still have control of it.
2731 if (intel_dp
->pps_pipe
!= INVALID_PIPE
)
2732 vlv_detach_power_sequencer(intel_dp
);
2735 * We may be stealing the power
2736 * sequencer from another port.
2738 vlv_steal_power_sequencer(dev
, crtc
->pipe
);
2740 /* now it's all ours */
2741 intel_dp
->pps_pipe
= crtc
->pipe
;
2743 DRM_DEBUG_KMS("initializing pipe %c power sequencer for port %c\n",
2744 pipe_name(intel_dp
->pps_pipe
), port_name(intel_dig_port
->port
));
2746 /* init power sequencer on this pipe and port */
2747 intel_dp_init_panel_power_sequencer(dev
, intel_dp
);
2748 intel_dp_init_panel_power_sequencer_registers(dev
, intel_dp
);
2751 static void vlv_pre_enable_dp(struct intel_encoder
*encoder
)
2753 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2754 struct intel_digital_port
*dport
= dp_to_dig_port(intel_dp
);
2755 struct drm_device
*dev
= encoder
->base
.dev
;
2756 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2757 struct intel_crtc
*intel_crtc
= to_intel_crtc(encoder
->base
.crtc
);
2758 enum dpio_channel port
= vlv_dport_to_channel(dport
);
2759 int pipe
= intel_crtc
->pipe
;
2762 mutex_lock(&dev_priv
->sb_lock
);
2764 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW8(port
));
2771 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW8(port
), val
);
2772 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW14(port
), 0x00760018);
2773 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW23(port
), 0x00400888);
2775 mutex_unlock(&dev_priv
->sb_lock
);
2777 intel_enable_dp(encoder
);
2780 static void vlv_dp_pre_pll_enable(struct intel_encoder
*encoder
)
2782 struct intel_digital_port
*dport
= enc_to_dig_port(&encoder
->base
);
2783 struct drm_device
*dev
= encoder
->base
.dev
;
2784 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2785 struct intel_crtc
*intel_crtc
=
2786 to_intel_crtc(encoder
->base
.crtc
);
2787 enum dpio_channel port
= vlv_dport_to_channel(dport
);
2788 int pipe
= intel_crtc
->pipe
;
2790 intel_dp_prepare(encoder
);
2792 /* Program Tx lane resets to default */
2793 mutex_lock(&dev_priv
->sb_lock
);
2794 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW0(port
),
2795 DPIO_PCS_TX_LANE2_RESET
|
2796 DPIO_PCS_TX_LANE1_RESET
);
2797 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW1(port
),
2798 DPIO_PCS_CLK_CRI_RXEB_EIOS_EN
|
2799 DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN
|
2800 (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT
) |
2801 DPIO_PCS_CLK_SOFT_RESET
);
2803 /* Fix up inter-pair skew failure */
2804 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW12(port
), 0x00750f00);
2805 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW11(port
), 0x00001500);
2806 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW14(port
), 0x40400000);
2807 mutex_unlock(&dev_priv
->sb_lock
);
2810 static void chv_pre_enable_dp(struct intel_encoder
*encoder
)
2812 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2813 struct intel_digital_port
*dport
= dp_to_dig_port(intel_dp
);
2814 struct drm_device
*dev
= encoder
->base
.dev
;
2815 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2816 struct intel_crtc
*intel_crtc
=
2817 to_intel_crtc(encoder
->base
.crtc
);
2818 enum dpio_channel ch
= vlv_dport_to_channel(dport
);
2819 int pipe
= intel_crtc
->pipe
;
2820 int data
, i
, stagger
;
2823 mutex_lock(&dev_priv
->sb_lock
);
2825 /* allow hardware to manage TX FIFO reset source */
2826 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW11(ch
));
2827 val
&= ~DPIO_LANEDESKEW_STRAP_OVRD
;
2828 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW11(ch
), val
);
2830 if (intel_crtc
->config
->lane_count
> 2) {
2831 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW11(ch
));
2832 val
&= ~DPIO_LANEDESKEW_STRAP_OVRD
;
2833 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW11(ch
), val
);
2836 /* Program Tx lane latency optimal setting*/
2837 for (i
= 0; i
< intel_crtc
->config
->lane_count
; i
++) {
2838 /* Set the upar bit */
2839 if (intel_crtc
->config
->lane_count
== 1)
2842 data
= (i
== 1) ? 0x0 : 0x1;
2843 vlv_dpio_write(dev_priv
, pipe
, CHV_TX_DW14(ch
, i
),
2844 data
<< DPIO_UPAR_SHIFT
);
2847 /* Data lane stagger programming */
2848 if (intel_crtc
->config
->port_clock
> 270000)
2850 else if (intel_crtc
->config
->port_clock
> 135000)
2852 else if (intel_crtc
->config
->port_clock
> 67500)
2854 else if (intel_crtc
->config
->port_clock
> 33750)
2859 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW11(ch
));
2860 val
|= DPIO_TX2_STAGGER_MASK(0x1f);
2861 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW11(ch
), val
);
2863 if (intel_crtc
->config
->lane_count
> 2) {
2864 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW11(ch
));
2865 val
|= DPIO_TX2_STAGGER_MASK(0x1f);
2866 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW11(ch
), val
);
2869 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW12(ch
),
2870 DPIO_LANESTAGGER_STRAP(stagger
) |
2871 DPIO_LANESTAGGER_STRAP_OVRD
|
2872 DPIO_TX1_STAGGER_MASK(0x1f) |
2873 DPIO_TX1_STAGGER_MULT(6) |
2874 DPIO_TX2_STAGGER_MULT(0));
2876 if (intel_crtc
->config
->lane_count
> 2) {
2877 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW12(ch
),
2878 DPIO_LANESTAGGER_STRAP(stagger
) |
2879 DPIO_LANESTAGGER_STRAP_OVRD
|
2880 DPIO_TX1_STAGGER_MASK(0x1f) |
2881 DPIO_TX1_STAGGER_MULT(7) |
2882 DPIO_TX2_STAGGER_MULT(5));
2885 /* Deassert data lane reset */
2886 chv_data_lane_soft_reset(encoder
, false);
2888 mutex_unlock(&dev_priv
->sb_lock
);
2890 intel_enable_dp(encoder
);
2892 /* Second common lane will stay alive on its own now */
2893 if (dport
->release_cl2_override
) {
2894 chv_phy_powergate_ch(dev_priv
, DPIO_PHY0
, DPIO_CH1
, false);
2895 dport
->release_cl2_override
= false;
2899 static void chv_dp_pre_pll_enable(struct intel_encoder
*encoder
)
2901 struct intel_digital_port
*dport
= enc_to_dig_port(&encoder
->base
);
2902 struct drm_device
*dev
= encoder
->base
.dev
;
2903 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2904 struct intel_crtc
*intel_crtc
=
2905 to_intel_crtc(encoder
->base
.crtc
);
2906 enum dpio_channel ch
= vlv_dport_to_channel(dport
);
2907 enum pipe pipe
= intel_crtc
->pipe
;
2908 unsigned int lane_mask
=
2909 intel_dp_unused_lane_mask(intel_crtc
->config
->lane_count
);
2912 intel_dp_prepare(encoder
);
2915 * Must trick the second common lane into life.
2916 * Otherwise we can't even access the PLL.
2918 if (ch
== DPIO_CH0
&& pipe
== PIPE_B
)
2919 dport
->release_cl2_override
=
2920 !chv_phy_powergate_ch(dev_priv
, DPIO_PHY0
, DPIO_CH1
, true);
2922 chv_phy_powergate_lanes(encoder
, true, lane_mask
);
2924 mutex_lock(&dev_priv
->sb_lock
);
2926 /* Assert data lane reset */
2927 chv_data_lane_soft_reset(encoder
, true);
2929 /* program left/right clock distribution */
2930 if (pipe
!= PIPE_B
) {
2931 val
= vlv_dpio_read(dev_priv
, pipe
, _CHV_CMN_DW5_CH0
);
2932 val
&= ~(CHV_BUFLEFTENA1_MASK
| CHV_BUFRIGHTENA1_MASK
);
2934 val
|= CHV_BUFLEFTENA1_FORCE
;
2936 val
|= CHV_BUFRIGHTENA1_FORCE
;
2937 vlv_dpio_write(dev_priv
, pipe
, _CHV_CMN_DW5_CH0
, val
);
2939 val
= vlv_dpio_read(dev_priv
, pipe
, _CHV_CMN_DW1_CH1
);
2940 val
&= ~(CHV_BUFLEFTENA2_MASK
| CHV_BUFRIGHTENA2_MASK
);
2942 val
|= CHV_BUFLEFTENA2_FORCE
;
2944 val
|= CHV_BUFRIGHTENA2_FORCE
;
2945 vlv_dpio_write(dev_priv
, pipe
, _CHV_CMN_DW1_CH1
, val
);
2948 /* program clock channel usage */
2949 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW8(ch
));
2950 val
|= CHV_PCS_USEDCLKCHANNEL_OVRRIDE
;
2952 val
&= ~CHV_PCS_USEDCLKCHANNEL
;
2954 val
|= CHV_PCS_USEDCLKCHANNEL
;
2955 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW8(ch
), val
);
2957 if (intel_crtc
->config
->lane_count
> 2) {
2958 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW8(ch
));
2959 val
|= CHV_PCS_USEDCLKCHANNEL_OVRRIDE
;
2961 val
&= ~CHV_PCS_USEDCLKCHANNEL
;
2963 val
|= CHV_PCS_USEDCLKCHANNEL
;
2964 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW8(ch
), val
);
2968 * This a a bit weird since generally CL
2969 * matches the pipe, but here we need to
2970 * pick the CL based on the port.
2972 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_CMN_DW19(ch
));
2974 val
&= ~CHV_CMN_USEDCLKCHANNEL
;
2976 val
|= CHV_CMN_USEDCLKCHANNEL
;
2977 vlv_dpio_write(dev_priv
, pipe
, CHV_CMN_DW19(ch
), val
);
2979 mutex_unlock(&dev_priv
->sb_lock
);
2982 static void chv_dp_post_pll_disable(struct intel_encoder
*encoder
)
2984 struct drm_i915_private
*dev_priv
= to_i915(encoder
->base
.dev
);
2985 enum pipe pipe
= to_intel_crtc(encoder
->base
.crtc
)->pipe
;
2988 mutex_lock(&dev_priv
->sb_lock
);
2990 /* disable left/right clock distribution */
2991 if (pipe
!= PIPE_B
) {
2992 val
= vlv_dpio_read(dev_priv
, pipe
, _CHV_CMN_DW5_CH0
);
2993 val
&= ~(CHV_BUFLEFTENA1_MASK
| CHV_BUFRIGHTENA1_MASK
);
2994 vlv_dpio_write(dev_priv
, pipe
, _CHV_CMN_DW5_CH0
, val
);
2996 val
= vlv_dpio_read(dev_priv
, pipe
, _CHV_CMN_DW1_CH1
);
2997 val
&= ~(CHV_BUFLEFTENA2_MASK
| CHV_BUFRIGHTENA2_MASK
);
2998 vlv_dpio_write(dev_priv
, pipe
, _CHV_CMN_DW1_CH1
, val
);
3001 mutex_unlock(&dev_priv
->sb_lock
);
3004 * Leave the power down bit cleared for at least one
3005 * lane so that chv_powergate_phy_ch() will power
3006 * on something when the channel is otherwise unused.
3007 * When the port is off and the override is removed
3008 * the lanes power down anyway, so otherwise it doesn't
3009 * really matter what the state of power down bits is
3012 chv_phy_powergate_lanes(encoder
, false, 0x0);
3016 * Native read with retry for link status and receiver capability reads for
3017 * cases where the sink may still be asleep.
3019 * Sinks are *supposed* to come up within 1ms from an off state, but we're also
3020 * supposed to retry 3 times per the spec.
3023 intel_dp_dpcd_read_wake(struct drm_dp_aux
*aux
, unsigned int offset
,
3024 void *buffer
, size_t size
)
3030 * Sometime we just get the same incorrect byte repeated
3031 * over the entire buffer. Doing just one throw away read
3032 * initially seems to "solve" it.
3034 drm_dp_dpcd_read(aux
, DP_DPCD_REV
, buffer
, 1);
3036 for (i
= 0; i
< 3; i
++) {
3037 ret
= drm_dp_dpcd_read(aux
, offset
, buffer
, size
);
3047 * Fetch AUX CH registers 0x202 - 0x207 which contain
3048 * link status information
3051 intel_dp_get_link_status(struct intel_dp
*intel_dp
, uint8_t link_status
[DP_LINK_STATUS_SIZE
])
3053 return intel_dp_dpcd_read_wake(&intel_dp
->aux
,
3056 DP_LINK_STATUS_SIZE
) == DP_LINK_STATUS_SIZE
;
3059 /* These are source-specific values. */
3061 intel_dp_voltage_max(struct intel_dp
*intel_dp
)
3063 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
3064 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3065 enum port port
= dp_to_dig_port(intel_dp
)->port
;
3067 if (IS_BROXTON(dev
))
3068 return DP_TRAIN_VOLTAGE_SWING_LEVEL_3
;
3069 else if (INTEL_INFO(dev
)->gen
>= 9) {
3070 if (dev_priv
->edp_low_vswing
&& port
== PORT_A
)
3071 return DP_TRAIN_VOLTAGE_SWING_LEVEL_3
;
3072 return DP_TRAIN_VOLTAGE_SWING_LEVEL_2
;
3073 } else if (IS_VALLEYVIEW(dev
))
3074 return DP_TRAIN_VOLTAGE_SWING_LEVEL_3
;
3075 else if (IS_GEN7(dev
) && port
== PORT_A
)
3076 return DP_TRAIN_VOLTAGE_SWING_LEVEL_2
;
3077 else if (HAS_PCH_CPT(dev
) && port
!= PORT_A
)
3078 return DP_TRAIN_VOLTAGE_SWING_LEVEL_3
;
3080 return DP_TRAIN_VOLTAGE_SWING_LEVEL_2
;
3084 intel_dp_pre_emphasis_max(struct intel_dp
*intel_dp
, uint8_t voltage_swing
)
3086 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
3087 enum port port
= dp_to_dig_port(intel_dp
)->port
;
3089 if (INTEL_INFO(dev
)->gen
>= 9) {
3090 switch (voltage_swing
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3091 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3092 return DP_TRAIN_PRE_EMPH_LEVEL_3
;
3093 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3094 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
3095 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3096 return DP_TRAIN_PRE_EMPH_LEVEL_1
;
3097 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
3098 return DP_TRAIN_PRE_EMPH_LEVEL_0
;
3100 return DP_TRAIN_PRE_EMPH_LEVEL_0
;
3102 } else if (IS_HASWELL(dev
) || IS_BROADWELL(dev
)) {
3103 switch (voltage_swing
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3104 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3105 return DP_TRAIN_PRE_EMPH_LEVEL_3
;
3106 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3107 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
3108 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3109 return DP_TRAIN_PRE_EMPH_LEVEL_1
;
3110 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
3112 return DP_TRAIN_PRE_EMPH_LEVEL_0
;
3114 } else if (IS_VALLEYVIEW(dev
)) {
3115 switch (voltage_swing
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3116 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3117 return DP_TRAIN_PRE_EMPH_LEVEL_3
;
3118 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3119 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
3120 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3121 return DP_TRAIN_PRE_EMPH_LEVEL_1
;
3122 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
3124 return DP_TRAIN_PRE_EMPH_LEVEL_0
;
3126 } else if (IS_GEN7(dev
) && port
== PORT_A
) {
3127 switch (voltage_swing
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3128 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3129 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
3130 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3131 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3132 return DP_TRAIN_PRE_EMPH_LEVEL_1
;
3134 return DP_TRAIN_PRE_EMPH_LEVEL_0
;
3137 switch (voltage_swing
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3138 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3139 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
3140 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3141 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
3142 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3143 return DP_TRAIN_PRE_EMPH_LEVEL_1
;
3144 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
3146 return DP_TRAIN_PRE_EMPH_LEVEL_0
;
3151 static uint32_t vlv_signal_levels(struct intel_dp
*intel_dp
)
3153 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
3154 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3155 struct intel_digital_port
*dport
= dp_to_dig_port(intel_dp
);
3156 struct intel_crtc
*intel_crtc
=
3157 to_intel_crtc(dport
->base
.base
.crtc
);
3158 unsigned long demph_reg_value
, preemph_reg_value
,
3159 uniqtranscale_reg_value
;
3160 uint8_t train_set
= intel_dp
->train_set
[0];
3161 enum dpio_channel port
= vlv_dport_to_channel(dport
);
3162 int pipe
= intel_crtc
->pipe
;
3164 switch (train_set
& DP_TRAIN_PRE_EMPHASIS_MASK
) {
3165 case DP_TRAIN_PRE_EMPH_LEVEL_0
:
3166 preemph_reg_value
= 0x0004000;
3167 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3168 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3169 demph_reg_value
= 0x2B405555;
3170 uniqtranscale_reg_value
= 0x552AB83A;
3172 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3173 demph_reg_value
= 0x2B404040;
3174 uniqtranscale_reg_value
= 0x5548B83A;
3176 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3177 demph_reg_value
= 0x2B245555;
3178 uniqtranscale_reg_value
= 0x5560B83A;
3180 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
3181 demph_reg_value
= 0x2B405555;
3182 uniqtranscale_reg_value
= 0x5598DA3A;
3188 case DP_TRAIN_PRE_EMPH_LEVEL_1
:
3189 preemph_reg_value
= 0x0002000;
3190 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3191 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3192 demph_reg_value
= 0x2B404040;
3193 uniqtranscale_reg_value
= 0x5552B83A;
3195 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3196 demph_reg_value
= 0x2B404848;
3197 uniqtranscale_reg_value
= 0x5580B83A;
3199 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3200 demph_reg_value
= 0x2B404040;
3201 uniqtranscale_reg_value
= 0x55ADDA3A;
3207 case DP_TRAIN_PRE_EMPH_LEVEL_2
:
3208 preemph_reg_value
= 0x0000000;
3209 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3210 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3211 demph_reg_value
= 0x2B305555;
3212 uniqtranscale_reg_value
= 0x5570B83A;
3214 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3215 demph_reg_value
= 0x2B2B4040;
3216 uniqtranscale_reg_value
= 0x55ADDA3A;
3222 case DP_TRAIN_PRE_EMPH_LEVEL_3
:
3223 preemph_reg_value
= 0x0006000;
3224 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3225 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3226 demph_reg_value
= 0x1B405555;
3227 uniqtranscale_reg_value
= 0x55ADDA3A;
3237 mutex_lock(&dev_priv
->sb_lock
);
3238 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW5(port
), 0x00000000);
3239 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW4(port
), demph_reg_value
);
3240 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW2(port
),
3241 uniqtranscale_reg_value
);
3242 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW3(port
), 0x0C782040);
3243 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW11(port
), 0x00030000);
3244 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW9(port
), preemph_reg_value
);
3245 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW5(port
), 0x80000000);
3246 mutex_unlock(&dev_priv
->sb_lock
);
3251 static bool chv_need_uniq_trans_scale(uint8_t train_set
)
3253 return (train_set
& DP_TRAIN_PRE_EMPHASIS_MASK
) == DP_TRAIN_PRE_EMPH_LEVEL_0
&&
3254 (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3
;
3257 static uint32_t chv_signal_levels(struct intel_dp
*intel_dp
)
3259 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
3260 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3261 struct intel_digital_port
*dport
= dp_to_dig_port(intel_dp
);
3262 struct intel_crtc
*intel_crtc
= to_intel_crtc(dport
->base
.base
.crtc
);
3263 u32 deemph_reg_value
, margin_reg_value
, val
;
3264 uint8_t train_set
= intel_dp
->train_set
[0];
3265 enum dpio_channel ch
= vlv_dport_to_channel(dport
);
3266 enum pipe pipe
= intel_crtc
->pipe
;
3269 switch (train_set
& DP_TRAIN_PRE_EMPHASIS_MASK
) {
3270 case DP_TRAIN_PRE_EMPH_LEVEL_0
:
3271 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3272 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3273 deemph_reg_value
= 128;
3274 margin_reg_value
= 52;
3276 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3277 deemph_reg_value
= 128;
3278 margin_reg_value
= 77;
3280 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3281 deemph_reg_value
= 128;
3282 margin_reg_value
= 102;
3284 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
3285 deemph_reg_value
= 128;
3286 margin_reg_value
= 154;
3287 /* FIXME extra to set for 1200 */
3293 case DP_TRAIN_PRE_EMPH_LEVEL_1
:
3294 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3295 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3296 deemph_reg_value
= 85;
3297 margin_reg_value
= 78;
3299 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3300 deemph_reg_value
= 85;
3301 margin_reg_value
= 116;
3303 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3304 deemph_reg_value
= 85;
3305 margin_reg_value
= 154;
3311 case DP_TRAIN_PRE_EMPH_LEVEL_2
:
3312 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3313 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3314 deemph_reg_value
= 64;
3315 margin_reg_value
= 104;
3317 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3318 deemph_reg_value
= 64;
3319 margin_reg_value
= 154;
3325 case DP_TRAIN_PRE_EMPH_LEVEL_3
:
3326 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3327 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3328 deemph_reg_value
= 43;
3329 margin_reg_value
= 154;
3339 mutex_lock(&dev_priv
->sb_lock
);
3341 /* Clear calc init */
3342 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW10(ch
));
3343 val
&= ~(DPIO_PCS_SWING_CALC_TX0_TX2
| DPIO_PCS_SWING_CALC_TX1_TX3
);
3344 val
&= ~(DPIO_PCS_TX1DEEMP_MASK
| DPIO_PCS_TX2DEEMP_MASK
);
3345 val
|= DPIO_PCS_TX1DEEMP_9P5
| DPIO_PCS_TX2DEEMP_9P5
;
3346 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW10(ch
), val
);
3348 if (intel_crtc
->config
->lane_count
> 2) {
3349 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW10(ch
));
3350 val
&= ~(DPIO_PCS_SWING_CALC_TX0_TX2
| DPIO_PCS_SWING_CALC_TX1_TX3
);
3351 val
&= ~(DPIO_PCS_TX1DEEMP_MASK
| DPIO_PCS_TX2DEEMP_MASK
);
3352 val
|= DPIO_PCS_TX1DEEMP_9P5
| DPIO_PCS_TX2DEEMP_9P5
;
3353 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW10(ch
), val
);
3356 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW9(ch
));
3357 val
&= ~(DPIO_PCS_TX1MARGIN_MASK
| DPIO_PCS_TX2MARGIN_MASK
);
3358 val
|= DPIO_PCS_TX1MARGIN_000
| DPIO_PCS_TX2MARGIN_000
;
3359 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW9(ch
), val
);
3361 if (intel_crtc
->config
->lane_count
> 2) {
3362 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW9(ch
));
3363 val
&= ~(DPIO_PCS_TX1MARGIN_MASK
| DPIO_PCS_TX2MARGIN_MASK
);
3364 val
|= DPIO_PCS_TX1MARGIN_000
| DPIO_PCS_TX2MARGIN_000
;
3365 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW9(ch
), val
);
3368 /* Program swing deemph */
3369 for (i
= 0; i
< intel_crtc
->config
->lane_count
; i
++) {
3370 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_TX_DW4(ch
, i
));
3371 val
&= ~DPIO_SWING_DEEMPH9P5_MASK
;
3372 val
|= deemph_reg_value
<< DPIO_SWING_DEEMPH9P5_SHIFT
;
3373 vlv_dpio_write(dev_priv
, pipe
, CHV_TX_DW4(ch
, i
), val
);
3376 /* Program swing margin */
3377 for (i
= 0; i
< intel_crtc
->config
->lane_count
; i
++) {
3378 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_TX_DW2(ch
, i
));
3380 val
&= ~DPIO_SWING_MARGIN000_MASK
;
3381 val
|= margin_reg_value
<< DPIO_SWING_MARGIN000_SHIFT
;
3384 * Supposedly this value shouldn't matter when unique transition
3385 * scale is disabled, but in fact it does matter. Let's just
3386 * always program the same value and hope it's OK.
3388 val
&= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT
);
3389 val
|= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT
;
3391 vlv_dpio_write(dev_priv
, pipe
, CHV_TX_DW2(ch
, i
), val
);
3395 * The document said it needs to set bit 27 for ch0 and bit 26
3396 * for ch1. Might be a typo in the doc.
3397 * For now, for this unique transition scale selection, set bit
3398 * 27 for ch0 and ch1.
3400 for (i
= 0; i
< intel_crtc
->config
->lane_count
; i
++) {
3401 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_TX_DW3(ch
, i
));
3402 if (chv_need_uniq_trans_scale(train_set
))
3403 val
|= DPIO_TX_UNIQ_TRANS_SCALE_EN
;
3405 val
&= ~DPIO_TX_UNIQ_TRANS_SCALE_EN
;
3406 vlv_dpio_write(dev_priv
, pipe
, CHV_TX_DW3(ch
, i
), val
);
3409 /* Start swing calculation */
3410 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW10(ch
));
3411 val
|= DPIO_PCS_SWING_CALC_TX0_TX2
| DPIO_PCS_SWING_CALC_TX1_TX3
;
3412 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW10(ch
), val
);
3414 if (intel_crtc
->config
->lane_count
> 2) {
3415 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW10(ch
));
3416 val
|= DPIO_PCS_SWING_CALC_TX0_TX2
| DPIO_PCS_SWING_CALC_TX1_TX3
;
3417 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW10(ch
), val
);
3421 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_CMN_DW30
);
3422 val
|= DPIO_LRC_BYPASS
;
3423 vlv_dpio_write(dev_priv
, pipe
, CHV_CMN_DW30
, val
);
3425 mutex_unlock(&dev_priv
->sb_lock
);
3431 intel_get_adjust_train(struct intel_dp
*intel_dp
,
3432 const uint8_t link_status
[DP_LINK_STATUS_SIZE
])
3437 uint8_t voltage_max
;
3438 uint8_t preemph_max
;
3440 for (lane
= 0; lane
< intel_dp
->lane_count
; lane
++) {
3441 uint8_t this_v
= drm_dp_get_adjust_request_voltage(link_status
, lane
);
3442 uint8_t this_p
= drm_dp_get_adjust_request_pre_emphasis(link_status
, lane
);
3450 voltage_max
= intel_dp_voltage_max(intel_dp
);
3451 if (v
>= voltage_max
)
3452 v
= voltage_max
| DP_TRAIN_MAX_SWING_REACHED
;
3454 preemph_max
= intel_dp_pre_emphasis_max(intel_dp
, v
);
3455 if (p
>= preemph_max
)
3456 p
= preemph_max
| DP_TRAIN_MAX_PRE_EMPHASIS_REACHED
;
3458 for (lane
= 0; lane
< 4; lane
++)
3459 intel_dp
->train_set
[lane
] = v
| p
;
3463 gen4_signal_levels(uint8_t train_set
)
3465 uint32_t signal_levels
= 0;
3467 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3468 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3470 signal_levels
|= DP_VOLTAGE_0_4
;
3472 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3473 signal_levels
|= DP_VOLTAGE_0_6
;
3475 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3476 signal_levels
|= DP_VOLTAGE_0_8
;
3478 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
3479 signal_levels
|= DP_VOLTAGE_1_2
;
3482 switch (train_set
& DP_TRAIN_PRE_EMPHASIS_MASK
) {
3483 case DP_TRAIN_PRE_EMPH_LEVEL_0
:
3485 signal_levels
|= DP_PRE_EMPHASIS_0
;
3487 case DP_TRAIN_PRE_EMPH_LEVEL_1
:
3488 signal_levels
|= DP_PRE_EMPHASIS_3_5
;
3490 case DP_TRAIN_PRE_EMPH_LEVEL_2
:
3491 signal_levels
|= DP_PRE_EMPHASIS_6
;
3493 case DP_TRAIN_PRE_EMPH_LEVEL_3
:
3494 signal_levels
|= DP_PRE_EMPHASIS_9_5
;
3497 return signal_levels
;
3500 /* Gen6's DP voltage swing and pre-emphasis control */
3502 gen6_edp_signal_levels(uint8_t train_set
)
3504 int signal_levels
= train_set
& (DP_TRAIN_VOLTAGE_SWING_MASK
|
3505 DP_TRAIN_PRE_EMPHASIS_MASK
);
3506 switch (signal_levels
) {
3507 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3508 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3509 return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B
;
3510 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3511 return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B
;
3512 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_2
:
3513 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_2
:
3514 return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B
;
3515 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3516 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3517 return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B
;
3518 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3519 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3520 return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B
;
3522 DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
3523 "0x%x\n", signal_levels
);
3524 return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B
;
3528 /* Gen7's DP voltage swing and pre-emphasis control */
3530 gen7_edp_signal_levels(uint8_t train_set
)
3532 int signal_levels
= train_set
& (DP_TRAIN_VOLTAGE_SWING_MASK
|
3533 DP_TRAIN_PRE_EMPHASIS_MASK
);
3534 switch (signal_levels
) {
3535 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3536 return EDP_LINK_TRAIN_400MV_0DB_IVB
;
3537 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3538 return EDP_LINK_TRAIN_400MV_3_5DB_IVB
;
3539 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_2
:
3540 return EDP_LINK_TRAIN_400MV_6DB_IVB
;
3542 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3543 return EDP_LINK_TRAIN_600MV_0DB_IVB
;
3544 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3545 return EDP_LINK_TRAIN_600MV_3_5DB_IVB
;
3547 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3548 return EDP_LINK_TRAIN_800MV_0DB_IVB
;
3549 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3550 return EDP_LINK_TRAIN_800MV_3_5DB_IVB
;
3553 DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
3554 "0x%x\n", signal_levels
);
3555 return EDP_LINK_TRAIN_500MV_0DB_IVB
;
3559 /* Properly updates "DP" with the correct signal levels. */
3561 intel_dp_set_signal_levels(struct intel_dp
*intel_dp
, uint32_t *DP
)
3563 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
3564 enum port port
= intel_dig_port
->port
;
3565 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
3566 uint32_t signal_levels
, mask
= 0;
3567 uint8_t train_set
= intel_dp
->train_set
[0];
3570 signal_levels
= ddi_signal_levels(intel_dp
);
3572 if (IS_BROXTON(dev
))
3575 mask
= DDI_BUF_EMP_MASK
;
3576 } else if (IS_CHERRYVIEW(dev
)) {
3577 signal_levels
= chv_signal_levels(intel_dp
);
3578 } else if (IS_VALLEYVIEW(dev
)) {
3579 signal_levels
= vlv_signal_levels(intel_dp
);
3580 } else if (IS_GEN7(dev
) && port
== PORT_A
) {
3581 signal_levels
= gen7_edp_signal_levels(train_set
);
3582 mask
= EDP_LINK_TRAIN_VOL_EMP_MASK_IVB
;
3583 } else if (IS_GEN6(dev
) && port
== PORT_A
) {
3584 signal_levels
= gen6_edp_signal_levels(train_set
);
3585 mask
= EDP_LINK_TRAIN_VOL_EMP_MASK_SNB
;
3587 signal_levels
= gen4_signal_levels(train_set
);
3588 mask
= DP_VOLTAGE_MASK
| DP_PRE_EMPHASIS_MASK
;
3592 DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels
);
3594 DRM_DEBUG_KMS("Using vswing level %d\n",
3595 train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
);
3596 DRM_DEBUG_KMS("Using pre-emphasis level %d\n",
3597 (train_set
& DP_TRAIN_PRE_EMPHASIS_MASK
) >>
3598 DP_TRAIN_PRE_EMPHASIS_SHIFT
);
3600 *DP
= (*DP
& ~mask
) | signal_levels
;
3604 intel_dp_set_link_train(struct intel_dp
*intel_dp
,
3606 uint8_t dp_train_pat
)
3608 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
3609 struct drm_i915_private
*dev_priv
=
3610 to_i915(intel_dig_port
->base
.base
.dev
);
3611 uint8_t buf
[sizeof(intel_dp
->train_set
) + 1];
3614 _intel_dp_set_link_train(intel_dp
, DP
, dp_train_pat
);
3616 I915_WRITE(intel_dp
->output_reg
, *DP
);
3617 POSTING_READ(intel_dp
->output_reg
);
3619 buf
[0] = dp_train_pat
;
3620 if ((dp_train_pat
& DP_TRAINING_PATTERN_MASK
) ==
3621 DP_TRAINING_PATTERN_DISABLE
) {
3622 /* don't write DP_TRAINING_LANEx_SET on disable */
3625 /* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */
3626 memcpy(buf
+ 1, intel_dp
->train_set
, intel_dp
->lane_count
);
3627 len
= intel_dp
->lane_count
+ 1;
3630 ret
= drm_dp_dpcd_write(&intel_dp
->aux
, DP_TRAINING_PATTERN_SET
,
3637 intel_dp_reset_link_train(struct intel_dp
*intel_dp
, uint32_t *DP
,
3638 uint8_t dp_train_pat
)
3640 if (!intel_dp
->train_set_valid
)
3641 memset(intel_dp
->train_set
, 0, sizeof(intel_dp
->train_set
));
3642 intel_dp_set_signal_levels(intel_dp
, DP
);
3643 return intel_dp_set_link_train(intel_dp
, DP
, dp_train_pat
);
3647 intel_dp_update_link_train(struct intel_dp
*intel_dp
, uint32_t *DP
,
3648 const uint8_t link_status
[DP_LINK_STATUS_SIZE
])
3650 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
3651 struct drm_i915_private
*dev_priv
=
3652 to_i915(intel_dig_port
->base
.base
.dev
);
3655 intel_get_adjust_train(intel_dp
, link_status
);
3656 intel_dp_set_signal_levels(intel_dp
, DP
);
3658 I915_WRITE(intel_dp
->output_reg
, *DP
);
3659 POSTING_READ(intel_dp
->output_reg
);
3661 ret
= drm_dp_dpcd_write(&intel_dp
->aux
, DP_TRAINING_LANE0_SET
,
3662 intel_dp
->train_set
, intel_dp
->lane_count
);
3664 return ret
== intel_dp
->lane_count
;
3667 static void intel_dp_set_idle_link_train(struct intel_dp
*intel_dp
)
3669 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
3670 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
3671 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3672 enum port port
= intel_dig_port
->port
;
3678 val
= I915_READ(DP_TP_CTL(port
));
3679 val
&= ~DP_TP_CTL_LINK_TRAIN_MASK
;
3680 val
|= DP_TP_CTL_LINK_TRAIN_IDLE
;
3681 I915_WRITE(DP_TP_CTL(port
), val
);
3684 * On PORT_A we can have only eDP in SST mode. There the only reason
3685 * we need to set idle transmission mode is to work around a HW issue
3686 * where we enable the pipe while not in idle link-training mode.
3687 * In this case there is requirement to wait for a minimum number of
3688 * idle patterns to be sent.
3693 if (wait_for((I915_READ(DP_TP_STATUS(port
)) & DP_TP_STATUS_IDLE_DONE
),
3695 DRM_ERROR("Timed out waiting for DP idle patterns\n");
3698 /* Enable corresponding port and start training pattern 1 */
3700 intel_dp_start_link_train(struct intel_dp
*intel_dp
)
3702 struct drm_encoder
*encoder
= &dp_to_dig_port(intel_dp
)->base
.base
;
3703 struct drm_device
*dev
= encoder
->dev
;
3706 int voltage_tries
, loop_tries
;
3707 uint32_t DP
= intel_dp
->DP
;
3708 uint8_t link_config
[2];
3709 uint8_t link_bw
, rate_select
;
3712 intel_ddi_prepare_link_retrain(encoder
);
3714 intel_dp_compute_rate(intel_dp
, intel_dp
->link_rate
,
3715 &link_bw
, &rate_select
);
3717 /* Write the link configuration data */
3718 link_config
[0] = link_bw
;
3719 link_config
[1] = intel_dp
->lane_count
;
3720 if (drm_dp_enhanced_frame_cap(intel_dp
->dpcd
))
3721 link_config
[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN
;
3722 drm_dp_dpcd_write(&intel_dp
->aux
, DP_LINK_BW_SET
, link_config
, 2);
3723 if (intel_dp
->num_sink_rates
)
3724 drm_dp_dpcd_write(&intel_dp
->aux
, DP_LINK_RATE_SET
,
3728 link_config
[1] = DP_SET_ANSI_8B10B
;
3729 drm_dp_dpcd_write(&intel_dp
->aux
, DP_DOWNSPREAD_CTRL
, link_config
, 2);
3733 /* clock recovery */
3734 if (!intel_dp_reset_link_train(intel_dp
, &DP
,
3735 DP_TRAINING_PATTERN_1
|
3736 DP_LINK_SCRAMBLING_DISABLE
)) {
3737 DRM_ERROR("failed to enable link training\n");
3745 uint8_t link_status
[DP_LINK_STATUS_SIZE
];
3747 drm_dp_link_train_clock_recovery_delay(intel_dp
->dpcd
);
3748 if (!intel_dp_get_link_status(intel_dp
, link_status
)) {
3749 DRM_ERROR("failed to get link status\n");
3753 if (drm_dp_clock_recovery_ok(link_status
, intel_dp
->lane_count
)) {
3754 DRM_DEBUG_KMS("clock recovery OK\n");
3759 * if we used previously trained voltage and pre-emphasis values
3760 * and we don't get clock recovery, reset link training values
3762 if (intel_dp
->train_set_valid
) {
3763 DRM_DEBUG_KMS("clock recovery not ok, reset");
3764 /* clear the flag as we are not reusing train set */
3765 intel_dp
->train_set_valid
= false;
3766 if (!intel_dp_reset_link_train(intel_dp
, &DP
,
3767 DP_TRAINING_PATTERN_1
|
3768 DP_LINK_SCRAMBLING_DISABLE
)) {
3769 DRM_ERROR("failed to enable link training\n");
3775 /* Check to see if we've tried the max voltage */
3776 for (i
= 0; i
< intel_dp
->lane_count
; i
++)
3777 if ((intel_dp
->train_set
[i
] & DP_TRAIN_MAX_SWING_REACHED
) == 0)
3779 if (i
== intel_dp
->lane_count
) {
3781 if (loop_tries
== 5) {
3782 DRM_ERROR("too many full retries, give up\n");
3785 intel_dp_reset_link_train(intel_dp
, &DP
,
3786 DP_TRAINING_PATTERN_1
|
3787 DP_LINK_SCRAMBLING_DISABLE
);
3792 /* Check to see if we've tried the same voltage 5 times */
3793 if ((intel_dp
->train_set
[0] & DP_TRAIN_VOLTAGE_SWING_MASK
) == voltage
) {
3795 if (voltage_tries
== 5) {
3796 DRM_ERROR("too many voltage retries, give up\n");
3801 voltage
= intel_dp
->train_set
[0] & DP_TRAIN_VOLTAGE_SWING_MASK
;
3803 /* Update training set as requested by target */
3804 if (!intel_dp_update_link_train(intel_dp
, &DP
, link_status
)) {
3805 DRM_ERROR("failed to update link training\n");
3814 intel_dp_complete_link_train(struct intel_dp
*intel_dp
)
3816 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
3817 struct drm_device
*dev
= dig_port
->base
.base
.dev
;
3818 bool channel_eq
= false;
3819 int tries
, cr_tries
;
3820 uint32_t DP
= intel_dp
->DP
;
3821 uint32_t training_pattern
= DP_TRAINING_PATTERN_2
;
3824 * Training Pattern 3 for HBR2 or 1.2 devices that support it.
3826 * Intel platforms that support HBR2 also support TPS3. TPS3 support is
3827 * also mandatory for downstream devices that support HBR2.
3829 * Due to WaDisableHBR2 SKL < B0 is the only exception where TPS3 is
3830 * supported but still not enabled.
3832 if (intel_dp_source_supports_hbr2(dev
) &&
3833 drm_dp_tps3_supported(intel_dp
->dpcd
))
3834 training_pattern
= DP_TRAINING_PATTERN_3
;
3835 else if (intel_dp
->link_rate
== 540000)
3836 DRM_ERROR("5.4 Gbps link rate without HBR2/TPS3 support\n");
3838 /* channel equalization */
3839 if (!intel_dp_set_link_train(intel_dp
, &DP
,
3841 DP_LINK_SCRAMBLING_DISABLE
)) {
3842 DRM_ERROR("failed to start channel equalization\n");
3850 uint8_t link_status
[DP_LINK_STATUS_SIZE
];
3853 DRM_ERROR("failed to train DP, aborting\n");
3857 drm_dp_link_train_channel_eq_delay(intel_dp
->dpcd
);
3858 if (!intel_dp_get_link_status(intel_dp
, link_status
)) {
3859 DRM_ERROR("failed to get link status\n");
3863 /* Make sure clock is still ok */
3864 if (!drm_dp_clock_recovery_ok(link_status
,
3865 intel_dp
->lane_count
)) {
3866 intel_dp
->train_set_valid
= false;
3867 intel_dp_start_link_train(intel_dp
);
3868 intel_dp_set_link_train(intel_dp
, &DP
,
3870 DP_LINK_SCRAMBLING_DISABLE
);
3875 if (drm_dp_channel_eq_ok(link_status
,
3876 intel_dp
->lane_count
)) {
3881 /* Try 5 times, then try clock recovery if that fails */
3883 intel_dp
->train_set_valid
= false;
3884 intel_dp_start_link_train(intel_dp
);
3885 intel_dp_set_link_train(intel_dp
, &DP
,
3887 DP_LINK_SCRAMBLING_DISABLE
);
3893 /* Update training set as requested by target */
3894 if (!intel_dp_update_link_train(intel_dp
, &DP
, link_status
)) {
3895 DRM_ERROR("failed to update link training\n");
3901 intel_dp_set_idle_link_train(intel_dp
);
3906 intel_dp
->train_set_valid
= true;
3907 DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n");
3911 void intel_dp_stop_link_train(struct intel_dp
*intel_dp
)
3913 intel_dp_set_link_train(intel_dp
, &intel_dp
->DP
,
3914 DP_TRAINING_PATTERN_DISABLE
);
3918 intel_dp_link_down(struct intel_dp
*intel_dp
)
3920 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
3921 struct intel_crtc
*crtc
= to_intel_crtc(intel_dig_port
->base
.base
.crtc
);
3922 enum port port
= intel_dig_port
->port
;
3923 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
3924 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3925 uint32_t DP
= intel_dp
->DP
;
3927 if (WARN_ON(HAS_DDI(dev
)))
3930 if (WARN_ON((I915_READ(intel_dp
->output_reg
) & DP_PORT_EN
) == 0))
3933 DRM_DEBUG_KMS("\n");
3935 if ((IS_GEN7(dev
) && port
== PORT_A
) ||
3936 (HAS_PCH_CPT(dev
) && port
!= PORT_A
)) {
3937 DP
&= ~DP_LINK_TRAIN_MASK_CPT
;
3938 DP
|= DP_LINK_TRAIN_PAT_IDLE_CPT
;
3940 if (IS_CHERRYVIEW(dev
))
3941 DP
&= ~DP_LINK_TRAIN_MASK_CHV
;
3943 DP
&= ~DP_LINK_TRAIN_MASK
;
3944 DP
|= DP_LINK_TRAIN_PAT_IDLE
;
3946 I915_WRITE(intel_dp
->output_reg
, DP
);
3947 POSTING_READ(intel_dp
->output_reg
);
3949 DP
&= ~(DP_PORT_EN
| DP_AUDIO_OUTPUT_ENABLE
);
3950 I915_WRITE(intel_dp
->output_reg
, DP
);
3951 POSTING_READ(intel_dp
->output_reg
);
3954 * HW workaround for IBX, we need to move the port
3955 * to transcoder A after disabling it to allow the
3956 * matching HDMI port to be enabled on transcoder A.
3958 if (HAS_PCH_IBX(dev
) && crtc
->pipe
== PIPE_B
&& port
!= PORT_A
) {
3959 /* always enable with pattern 1 (as per spec) */
3960 DP
&= ~(DP_PIPEB_SELECT
| DP_LINK_TRAIN_MASK
);
3961 DP
|= DP_PORT_EN
| DP_LINK_TRAIN_PAT_1
;
3962 I915_WRITE(intel_dp
->output_reg
, DP
);
3963 POSTING_READ(intel_dp
->output_reg
);
3966 I915_WRITE(intel_dp
->output_reg
, DP
);
3967 POSTING_READ(intel_dp
->output_reg
);
3970 msleep(intel_dp
->panel_power_down_delay
);
3974 intel_dp_get_dpcd(struct intel_dp
*intel_dp
)
3976 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
3977 struct drm_device
*dev
= dig_port
->base
.base
.dev
;
3978 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3981 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, 0x000, intel_dp
->dpcd
,
3982 sizeof(intel_dp
->dpcd
)) < 0)
3983 return false; /* aux transfer failed */
3985 DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp
->dpcd
), intel_dp
->dpcd
);
3987 if (intel_dp
->dpcd
[DP_DPCD_REV
] == 0)
3988 return false; /* DPCD not present */
3990 /* Check if the panel supports PSR */
3991 memset(intel_dp
->psr_dpcd
, 0, sizeof(intel_dp
->psr_dpcd
));
3992 if (is_edp(intel_dp
)) {
3993 intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_PSR_SUPPORT
,
3995 sizeof(intel_dp
->psr_dpcd
));
3996 if (intel_dp
->psr_dpcd
[0] & DP_PSR_IS_SUPPORTED
) {
3997 dev_priv
->psr
.sink_support
= true;
3998 DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
4001 if (INTEL_INFO(dev
)->gen
>= 9 &&
4002 (intel_dp
->psr_dpcd
[0] & DP_PSR2_IS_SUPPORTED
)) {
4003 uint8_t frame_sync_cap
;
4005 dev_priv
->psr
.sink_support
= true;
4006 intel_dp_dpcd_read_wake(&intel_dp
->aux
,
4007 DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP
,
4008 &frame_sync_cap
, 1);
4009 dev_priv
->psr
.aux_frame_sync
= frame_sync_cap
? true : false;
4010 /* PSR2 needs frame sync as well */
4011 dev_priv
->psr
.psr2_support
= dev_priv
->psr
.aux_frame_sync
;
4012 DRM_DEBUG_KMS("PSR2 %s on sink",
4013 dev_priv
->psr
.psr2_support
? "supported" : "not supported");
4017 DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
4018 yesno(intel_dp_source_supports_hbr2(dev
)),
4019 yesno(drm_dp_tps3_supported(intel_dp
->dpcd
)));
4021 /* Intermediate frequency support */
4022 if (is_edp(intel_dp
) &&
4023 (intel_dp
->dpcd
[DP_EDP_CONFIGURATION_CAP
] & DP_DPCD_DISPLAY_CONTROL_CAPABLE
) &&
4024 (intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_EDP_DPCD_REV
, &rev
, 1) == 1) &&
4025 (rev
>= 0x03)) { /* eDp v1.4 or higher */
4026 __le16 sink_rates
[DP_MAX_SUPPORTED_RATES
];
4029 intel_dp_dpcd_read_wake(&intel_dp
->aux
,
4030 DP_SUPPORTED_LINK_RATES
,
4032 sizeof(sink_rates
));
4034 for (i
= 0; i
< ARRAY_SIZE(sink_rates
); i
++) {
4035 int val
= le16_to_cpu(sink_rates
[i
]);
4040 /* Value read is in kHz while drm clock is saved in deca-kHz */
4041 intel_dp
->sink_rates
[i
] = (val
* 200) / 10;
4043 intel_dp
->num_sink_rates
= i
;
4046 intel_dp_print_rates(intel_dp
);
4048 if (!(intel_dp
->dpcd
[DP_DOWNSTREAMPORT_PRESENT
] &
4049 DP_DWN_STRM_PORT_PRESENT
))
4050 return true; /* native DP sink */
4052 if (intel_dp
->dpcd
[DP_DPCD_REV
] == 0x10)
4053 return true; /* no per-port downstream info */
4055 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_DOWNSTREAM_PORT_0
,
4056 intel_dp
->downstream_ports
,
4057 DP_MAX_DOWNSTREAM_PORTS
) < 0)
4058 return false; /* downstream port status fetch failed */
4064 intel_dp_probe_oui(struct intel_dp
*intel_dp
)
4068 if (!(intel_dp
->dpcd
[DP_DOWN_STREAM_PORT_COUNT
] & DP_OUI_SUPPORT
))
4071 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_SINK_OUI
, buf
, 3) == 3)
4072 DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
4073 buf
[0], buf
[1], buf
[2]);
4075 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_BRANCH_OUI
, buf
, 3) == 3)
4076 DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
4077 buf
[0], buf
[1], buf
[2]);
4081 intel_dp_probe_mst(struct intel_dp
*intel_dp
)
4085 if (!intel_dp
->can_mst
)
4088 if (intel_dp
->dpcd
[DP_DPCD_REV
] < 0x12)
4091 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_MSTM_CAP
, buf
, 1)) {
4092 if (buf
[0] & DP_MST_CAP
) {
4093 DRM_DEBUG_KMS("Sink is MST capable\n");
4094 intel_dp
->is_mst
= true;
4096 DRM_DEBUG_KMS("Sink is not MST capable\n");
4097 intel_dp
->is_mst
= false;
4101 drm_dp_mst_topology_mgr_set_mst(&intel_dp
->mst_mgr
, intel_dp
->is_mst
);
4102 return intel_dp
->is_mst
;
4105 static int intel_dp_sink_crc_stop(struct intel_dp
*intel_dp
)
4107 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
4108 struct intel_crtc
*intel_crtc
= to_intel_crtc(dig_port
->base
.base
.crtc
);
4112 if (drm_dp_dpcd_readb(&intel_dp
->aux
, DP_TEST_SINK
, &buf
) < 0) {
4113 DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
4118 if (drm_dp_dpcd_writeb(&intel_dp
->aux
, DP_TEST_SINK
,
4119 buf
& ~DP_TEST_SINK_START
) < 0) {
4120 DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
4125 intel_dp
->sink_crc
.started
= false;
4127 hsw_enable_ips(intel_crtc
);
4131 static int intel_dp_sink_crc_start(struct intel_dp
*intel_dp
)
4133 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
4134 struct intel_crtc
*intel_crtc
= to_intel_crtc(dig_port
->base
.base
.crtc
);
4138 if (intel_dp
->sink_crc
.started
) {
4139 ret
= intel_dp_sink_crc_stop(intel_dp
);
4144 if (drm_dp_dpcd_readb(&intel_dp
->aux
, DP_TEST_SINK_MISC
, &buf
) < 0)
4147 if (!(buf
& DP_TEST_CRC_SUPPORTED
))
4150 intel_dp
->sink_crc
.last_count
= buf
& DP_TEST_COUNT_MASK
;
4152 if (drm_dp_dpcd_readb(&intel_dp
->aux
, DP_TEST_SINK
, &buf
) < 0)
4155 hsw_disable_ips(intel_crtc
);
4157 if (drm_dp_dpcd_writeb(&intel_dp
->aux
, DP_TEST_SINK
,
4158 buf
| DP_TEST_SINK_START
) < 0) {
4159 hsw_enable_ips(intel_crtc
);
4163 intel_dp
->sink_crc
.started
= true;
4167 int intel_dp_sink_crc(struct intel_dp
*intel_dp
, u8
*crc
)
4169 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
4170 struct drm_device
*dev
= dig_port
->base
.base
.dev
;
4171 struct intel_crtc
*intel_crtc
= to_intel_crtc(dig_port
->base
.base
.crtc
);
4177 ret
= intel_dp_sink_crc_start(intel_dp
);
4182 intel_wait_for_vblank(dev
, intel_crtc
->pipe
);
4184 if (drm_dp_dpcd_readb(&intel_dp
->aux
,
4185 DP_TEST_SINK_MISC
, &buf
) < 0) {
4189 count
= buf
& DP_TEST_COUNT_MASK
;
4192 * Count might be reset during the loop. In this case
4193 * last known count needs to be reset as well.
4196 intel_dp
->sink_crc
.last_count
= 0;
4198 if (drm_dp_dpcd_read(&intel_dp
->aux
, DP_TEST_CRC_R_CR
, crc
, 6) < 0) {
4203 old_equal_new
= (count
== intel_dp
->sink_crc
.last_count
&&
4204 !memcmp(intel_dp
->sink_crc
.last_crc
, crc
,
4207 } while (--attempts
&& (count
== 0 || old_equal_new
));
4209 intel_dp
->sink_crc
.last_count
= buf
& DP_TEST_COUNT_MASK
;
4210 memcpy(intel_dp
->sink_crc
.last_crc
, crc
, 6 * sizeof(u8
));
4212 if (attempts
== 0) {
4213 if (old_equal_new
) {
4214 DRM_DEBUG_KMS("Unreliable Sink CRC counter: Current returned CRC is identical to the previous one\n");
4216 DRM_ERROR("Panel is unable to calculate any CRC after 6 vblanks\n");
4223 intel_dp_sink_crc_stop(intel_dp
);
4228 intel_dp_get_sink_irq(struct intel_dp
*intel_dp
, u8
*sink_irq_vector
)
4230 return intel_dp_dpcd_read_wake(&intel_dp
->aux
,
4231 DP_DEVICE_SERVICE_IRQ_VECTOR
,
4232 sink_irq_vector
, 1) == 1;
4236 intel_dp_get_sink_irq_esi(struct intel_dp
*intel_dp
, u8
*sink_irq_vector
)
4240 ret
= intel_dp_dpcd_read_wake(&intel_dp
->aux
,
4242 sink_irq_vector
, 14);
4249 static uint8_t intel_dp_autotest_link_training(struct intel_dp
*intel_dp
)
4251 uint8_t test_result
= DP_TEST_ACK
;
4255 static uint8_t intel_dp_autotest_video_pattern(struct intel_dp
*intel_dp
)
4257 uint8_t test_result
= DP_TEST_NAK
;
4261 static uint8_t intel_dp_autotest_edid(struct intel_dp
*intel_dp
)
4263 uint8_t test_result
= DP_TEST_NAK
;
4264 struct intel_connector
*intel_connector
= intel_dp
->attached_connector
;
4265 struct drm_connector
*connector
= &intel_connector
->base
;
4267 if (intel_connector
->detect_edid
== NULL
||
4268 connector
->edid_corrupt
||
4269 intel_dp
->aux
.i2c_defer_count
> 6) {
4270 /* Check EDID read for NACKs, DEFERs and corruption
4271 * (DP CTS 1.2 Core r1.1)
4272 * 4.2.2.4 : Failed EDID read, I2C_NAK
4273 * 4.2.2.5 : Failed EDID read, I2C_DEFER
4274 * 4.2.2.6 : EDID corruption detected
4275 * Use failsafe mode for all cases
4277 if (intel_dp
->aux
.i2c_nack_count
> 0 ||
4278 intel_dp
->aux
.i2c_defer_count
> 0)
4279 DRM_DEBUG_KMS("EDID read had %d NACKs, %d DEFERs\n",
4280 intel_dp
->aux
.i2c_nack_count
,
4281 intel_dp
->aux
.i2c_defer_count
);
4282 intel_dp
->compliance_test_data
= INTEL_DP_RESOLUTION_FAILSAFE
;
4284 struct edid
*block
= intel_connector
->detect_edid
;
4286 /* We have to write the checksum
4287 * of the last block read
4289 block
+= intel_connector
->detect_edid
->extensions
;
4291 if (!drm_dp_dpcd_write(&intel_dp
->aux
,
4292 DP_TEST_EDID_CHECKSUM
,
4295 DRM_DEBUG_KMS("Failed to write EDID checksum\n");
4297 test_result
= DP_TEST_ACK
| DP_TEST_EDID_CHECKSUM_WRITE
;
4298 intel_dp
->compliance_test_data
= INTEL_DP_RESOLUTION_STANDARD
;
4301 /* Set test active flag here so userspace doesn't interrupt things */
4302 intel_dp
->compliance_test_active
= 1;
4307 static uint8_t intel_dp_autotest_phy_pattern(struct intel_dp
*intel_dp
)
4309 uint8_t test_result
= DP_TEST_NAK
;
4313 static void intel_dp_handle_test_request(struct intel_dp
*intel_dp
)
4315 uint8_t response
= DP_TEST_NAK
;
4319 intel_dp
->compliance_test_active
= 0;
4320 intel_dp
->compliance_test_type
= 0;
4321 intel_dp
->compliance_test_data
= 0;
4323 intel_dp
->aux
.i2c_nack_count
= 0;
4324 intel_dp
->aux
.i2c_defer_count
= 0;
4326 status
= drm_dp_dpcd_read(&intel_dp
->aux
, DP_TEST_REQUEST
, &rxdata
, 1);
4328 DRM_DEBUG_KMS("Could not read test request from sink\n");
4333 case DP_TEST_LINK_TRAINING
:
4334 DRM_DEBUG_KMS("LINK_TRAINING test requested\n");
4335 intel_dp
->compliance_test_type
= DP_TEST_LINK_TRAINING
;
4336 response
= intel_dp_autotest_link_training(intel_dp
);
4338 case DP_TEST_LINK_VIDEO_PATTERN
:
4339 DRM_DEBUG_KMS("TEST_PATTERN test requested\n");
4340 intel_dp
->compliance_test_type
= DP_TEST_LINK_VIDEO_PATTERN
;
4341 response
= intel_dp_autotest_video_pattern(intel_dp
);
4343 case DP_TEST_LINK_EDID_READ
:
4344 DRM_DEBUG_KMS("EDID test requested\n");
4345 intel_dp
->compliance_test_type
= DP_TEST_LINK_EDID_READ
;
4346 response
= intel_dp_autotest_edid(intel_dp
);
4348 case DP_TEST_LINK_PHY_TEST_PATTERN
:
4349 DRM_DEBUG_KMS("PHY_PATTERN test requested\n");
4350 intel_dp
->compliance_test_type
= DP_TEST_LINK_PHY_TEST_PATTERN
;
4351 response
= intel_dp_autotest_phy_pattern(intel_dp
);
4354 DRM_DEBUG_KMS("Invalid test request '%02x'\n", rxdata
);
4359 status
= drm_dp_dpcd_write(&intel_dp
->aux
,
4363 DRM_DEBUG_KMS("Could not write test response to sink\n");
4367 intel_dp_check_mst_status(struct intel_dp
*intel_dp
)
4371 if (intel_dp
->is_mst
) {
4376 bret
= intel_dp_get_sink_irq_esi(intel_dp
, esi
);
4380 /* check link status - esi[10] = 0x200c */
4381 if (intel_dp
->active_mst_links
&&
4382 !drm_dp_channel_eq_ok(&esi
[10], intel_dp
->lane_count
)) {
4383 DRM_DEBUG_KMS("channel EQ not ok, retraining\n");
4384 intel_dp_start_link_train(intel_dp
);
4385 intel_dp_complete_link_train(intel_dp
);
4386 intel_dp_stop_link_train(intel_dp
);
4389 DRM_DEBUG_KMS("got esi %3ph\n", esi
);
4390 ret
= drm_dp_mst_hpd_irq(&intel_dp
->mst_mgr
, esi
, &handled
);
4393 for (retry
= 0; retry
< 3; retry
++) {
4395 wret
= drm_dp_dpcd_write(&intel_dp
->aux
,
4396 DP_SINK_COUNT_ESI
+1,
4403 bret
= intel_dp_get_sink_irq_esi(intel_dp
, esi
);
4405 DRM_DEBUG_KMS("got esi2 %3ph\n", esi
);
4413 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
4414 DRM_DEBUG_KMS("failed to get ESI - device may have failed\n");
4415 intel_dp
->is_mst
= false;
4416 drm_dp_mst_topology_mgr_set_mst(&intel_dp
->mst_mgr
, intel_dp
->is_mst
);
4417 /* send a hotplug event */
4418 drm_kms_helper_hotplug_event(intel_dig_port
->base
.base
.dev
);
4425 * According to DP spec
4428 * 2. Configure link according to Receiver Capabilities
4429 * 3. Use Link Training from 2.5.3.3 and 3.5.1.3
4430 * 4. Check link status on receipt of hot-plug interrupt
4433 intel_dp_check_link_status(struct intel_dp
*intel_dp
)
4435 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
4436 struct intel_encoder
*intel_encoder
= &dp_to_dig_port(intel_dp
)->base
;
4438 u8 link_status
[DP_LINK_STATUS_SIZE
];
4440 WARN_ON(!drm_modeset_is_locked(&dev
->mode_config
.connection_mutex
));
4442 if (!intel_encoder
->base
.crtc
)
4445 if (!to_intel_crtc(intel_encoder
->base
.crtc
)->active
)
4448 /* Try to read receiver status if the link appears to be up */
4449 if (!intel_dp_get_link_status(intel_dp
, link_status
)) {
4453 /* Now read the DPCD to see if it's actually running */
4454 if (!intel_dp_get_dpcd(intel_dp
)) {
4458 /* Try to read the source of the interrupt */
4459 if (intel_dp
->dpcd
[DP_DPCD_REV
] >= 0x11 &&
4460 intel_dp_get_sink_irq(intel_dp
, &sink_irq_vector
)) {
4461 /* Clear interrupt source */
4462 drm_dp_dpcd_writeb(&intel_dp
->aux
,
4463 DP_DEVICE_SERVICE_IRQ_VECTOR
,
4466 if (sink_irq_vector
& DP_AUTOMATED_TEST_REQUEST
)
4467 DRM_DEBUG_DRIVER("Test request in short pulse not handled\n");
4468 if (sink_irq_vector
& (DP_CP_IRQ
| DP_SINK_SPECIFIC_IRQ
))
4469 DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
4472 if (!drm_dp_channel_eq_ok(link_status
, intel_dp
->lane_count
)) {
4473 DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
4474 intel_encoder
->base
.name
);
4475 intel_dp_start_link_train(intel_dp
);
4476 intel_dp_complete_link_train(intel_dp
);
4477 intel_dp_stop_link_train(intel_dp
);
4481 /* XXX this is probably wrong for multiple downstream ports */
4482 static enum drm_connector_status
4483 intel_dp_detect_dpcd(struct intel_dp
*intel_dp
)
4485 uint8_t *dpcd
= intel_dp
->dpcd
;
4488 if (!intel_dp_get_dpcd(intel_dp
))
4489 return connector_status_disconnected
;
4491 /* if there's no downstream port, we're done */
4492 if (!(dpcd
[DP_DOWNSTREAMPORT_PRESENT
] & DP_DWN_STRM_PORT_PRESENT
))
4493 return connector_status_connected
;
4495 /* If we're HPD-aware, SINK_COUNT changes dynamically */
4496 if (intel_dp
->dpcd
[DP_DPCD_REV
] >= 0x11 &&
4497 intel_dp
->downstream_ports
[0] & DP_DS_PORT_HPD
) {
4500 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_SINK_COUNT
,
4502 return connector_status_unknown
;
4504 return DP_GET_SINK_COUNT(reg
) ? connector_status_connected
4505 : connector_status_disconnected
;
4508 /* If no HPD, poke DDC gently */
4509 if (drm_probe_ddc(&intel_dp
->aux
.ddc
))
4510 return connector_status_connected
;
4512 /* Well we tried, say unknown for unreliable port types */
4513 if (intel_dp
->dpcd
[DP_DPCD_REV
] >= 0x11) {
4514 type
= intel_dp
->downstream_ports
[0] & DP_DS_PORT_TYPE_MASK
;
4515 if (type
== DP_DS_PORT_TYPE_VGA
||
4516 type
== DP_DS_PORT_TYPE_NON_EDID
)
4517 return connector_status_unknown
;
4519 type
= intel_dp
->dpcd
[DP_DOWNSTREAMPORT_PRESENT
] &
4520 DP_DWN_STRM_PORT_TYPE_MASK
;
4521 if (type
== DP_DWN_STRM_PORT_TYPE_ANALOG
||
4522 type
== DP_DWN_STRM_PORT_TYPE_OTHER
)
4523 return connector_status_unknown
;
4526 /* Anything else is out of spec, warn and ignore */
4527 DRM_DEBUG_KMS("Broken DP branch device, ignoring\n");
4528 return connector_status_disconnected
;
4531 static enum drm_connector_status
4532 edp_detect(struct intel_dp
*intel_dp
)
4534 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
4535 enum drm_connector_status status
;
4537 status
= intel_panel_detect(dev
);
4538 if (status
== connector_status_unknown
)
4539 status
= connector_status_connected
;
4544 static bool ibx_digital_port_connected(struct drm_i915_private
*dev_priv
,
4545 struct intel_digital_port
*port
)
4549 switch (port
->port
) {
4553 bit
= SDE_PORTB_HOTPLUG
;
4556 bit
= SDE_PORTC_HOTPLUG
;
4559 bit
= SDE_PORTD_HOTPLUG
;
4562 MISSING_CASE(port
->port
);
4566 return I915_READ(SDEISR
) & bit
;
4569 static bool cpt_digital_port_connected(struct drm_i915_private
*dev_priv
,
4570 struct intel_digital_port
*port
)
4574 switch (port
->port
) {
4578 bit
= SDE_PORTB_HOTPLUG_CPT
;
4581 bit
= SDE_PORTC_HOTPLUG_CPT
;
4584 bit
= SDE_PORTD_HOTPLUG_CPT
;
4587 bit
= SDE_PORTE_HOTPLUG_SPT
;
4590 MISSING_CASE(port
->port
);
4594 return I915_READ(SDEISR
) & bit
;
4597 static bool g4x_digital_port_connected(struct drm_i915_private
*dev_priv
,
4598 struct intel_digital_port
*port
)
4602 switch (port
->port
) {
4604 bit
= PORTB_HOTPLUG_LIVE_STATUS_G4X
;
4607 bit
= PORTC_HOTPLUG_LIVE_STATUS_G4X
;
4610 bit
= PORTD_HOTPLUG_LIVE_STATUS_G4X
;
4613 MISSING_CASE(port
->port
);
4617 return I915_READ(PORT_HOTPLUG_STAT
) & bit
;
4620 static bool vlv_digital_port_connected(struct drm_i915_private
*dev_priv
,
4621 struct intel_digital_port
*port
)
4625 switch (port
->port
) {
4627 bit
= PORTB_HOTPLUG_LIVE_STATUS_VLV
;
4630 bit
= PORTC_HOTPLUG_LIVE_STATUS_VLV
;
4633 bit
= PORTD_HOTPLUG_LIVE_STATUS_VLV
;
4636 MISSING_CASE(port
->port
);
4640 return I915_READ(PORT_HOTPLUG_STAT
) & bit
;
4643 static bool bxt_digital_port_connected(struct drm_i915_private
*dev_priv
,
4644 struct intel_digital_port
*intel_dig_port
)
4646 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
4650 intel_hpd_pin_to_port(intel_encoder
->hpd_pin
, &port
);
4653 bit
= BXT_DE_PORT_HP_DDIA
;
4656 bit
= BXT_DE_PORT_HP_DDIB
;
4659 bit
= BXT_DE_PORT_HP_DDIC
;
4666 return I915_READ(GEN8_DE_PORT_ISR
) & bit
;
4670 * intel_digital_port_connected - is the specified port connected?
4671 * @dev_priv: i915 private structure
4672 * @port: the port to test
4674 * Return %true if @port is connected, %false otherwise.
4676 bool intel_digital_port_connected(struct drm_i915_private
*dev_priv
,
4677 struct intel_digital_port
*port
)
4679 if (HAS_PCH_IBX(dev_priv
))
4680 return ibx_digital_port_connected(dev_priv
, port
);
4681 if (HAS_PCH_SPLIT(dev_priv
))
4682 return cpt_digital_port_connected(dev_priv
, port
);
4683 else if (IS_BROXTON(dev_priv
))
4684 return bxt_digital_port_connected(dev_priv
, port
);
4685 else if (IS_VALLEYVIEW(dev_priv
))
4686 return vlv_digital_port_connected(dev_priv
, port
);
4688 return g4x_digital_port_connected(dev_priv
, port
);
4691 static enum drm_connector_status
4692 ironlake_dp_detect(struct intel_dp
*intel_dp
)
4694 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
4695 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4696 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
4698 if (!intel_digital_port_connected(dev_priv
, intel_dig_port
))
4699 return connector_status_disconnected
;
4701 return intel_dp_detect_dpcd(intel_dp
);
4704 static enum drm_connector_status
4705 g4x_dp_detect(struct intel_dp
*intel_dp
)
4707 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
4708 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
4710 /* Can't disconnect eDP, but you can close the lid... */
4711 if (is_edp(intel_dp
)) {
4712 enum drm_connector_status status
;
4714 status
= intel_panel_detect(dev
);
4715 if (status
== connector_status_unknown
)
4716 status
= connector_status_connected
;
4720 if (!intel_digital_port_connected(dev
->dev_private
, intel_dig_port
))
4721 return connector_status_disconnected
;
4723 return intel_dp_detect_dpcd(intel_dp
);
4726 static struct edid
*
4727 intel_dp_get_edid(struct intel_dp
*intel_dp
)
4729 struct intel_connector
*intel_connector
= intel_dp
->attached_connector
;
4731 /* use cached edid if we have one */
4732 if (intel_connector
->edid
) {
4734 if (IS_ERR(intel_connector
->edid
))
4737 return drm_edid_duplicate(intel_connector
->edid
);
4739 return drm_get_edid(&intel_connector
->base
,
4740 &intel_dp
->aux
.ddc
);
4744 intel_dp_set_edid(struct intel_dp
*intel_dp
)
4746 struct intel_connector
*intel_connector
= intel_dp
->attached_connector
;
4749 edid
= intel_dp_get_edid(intel_dp
);
4750 intel_connector
->detect_edid
= edid
;
4752 if (intel_dp
->force_audio
!= HDMI_AUDIO_AUTO
)
4753 intel_dp
->has_audio
= intel_dp
->force_audio
== HDMI_AUDIO_ON
;
4755 intel_dp
->has_audio
= drm_detect_monitor_audio(edid
);
4759 intel_dp_unset_edid(struct intel_dp
*intel_dp
)
4761 struct intel_connector
*intel_connector
= intel_dp
->attached_connector
;
4763 kfree(intel_connector
->detect_edid
);
4764 intel_connector
->detect_edid
= NULL
;
4766 intel_dp
->has_audio
= false;
4769 static enum intel_display_power_domain
4770 intel_dp_power_get(struct intel_dp
*dp
)
4772 struct intel_encoder
*encoder
= &dp_to_dig_port(dp
)->base
;
4773 enum intel_display_power_domain power_domain
;
4775 power_domain
= intel_display_port_power_domain(encoder
);
4776 intel_display_power_get(to_i915(encoder
->base
.dev
), power_domain
);
4778 return power_domain
;
4782 intel_dp_power_put(struct intel_dp
*dp
,
4783 enum intel_display_power_domain power_domain
)
4785 struct intel_encoder
*encoder
= &dp_to_dig_port(dp
)->base
;
4786 intel_display_power_put(to_i915(encoder
->base
.dev
), power_domain
);
4789 static enum drm_connector_status
4790 intel_dp_detect(struct drm_connector
*connector
, bool force
)
4792 struct intel_dp
*intel_dp
= intel_attached_dp(connector
);
4793 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
4794 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
4795 struct drm_device
*dev
= connector
->dev
;
4796 enum drm_connector_status status
;
4797 enum intel_display_power_domain power_domain
;
4801 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
4802 connector
->base
.id
, connector
->name
);
4803 intel_dp_unset_edid(intel_dp
);
4805 if (intel_dp
->is_mst
) {
4806 /* MST devices are disconnected from a monitor POV */
4807 if (intel_encoder
->type
!= INTEL_OUTPUT_EDP
)
4808 intel_encoder
->type
= INTEL_OUTPUT_DISPLAYPORT
;
4809 return connector_status_disconnected
;
4812 power_domain
= intel_dp_power_get(intel_dp
);
4814 /* Can't disconnect eDP, but you can close the lid... */
4815 if (is_edp(intel_dp
))
4816 status
= edp_detect(intel_dp
);
4817 else if (HAS_PCH_SPLIT(dev
))
4818 status
= ironlake_dp_detect(intel_dp
);
4820 status
= g4x_dp_detect(intel_dp
);
4821 if (status
!= connector_status_connected
)
4824 intel_dp_probe_oui(intel_dp
);
4826 ret
= intel_dp_probe_mst(intel_dp
);
4828 /* if we are in MST mode then this connector
4829 won't appear connected or have anything with EDID on it */
4830 if (intel_encoder
->type
!= INTEL_OUTPUT_EDP
)
4831 intel_encoder
->type
= INTEL_OUTPUT_DISPLAYPORT
;
4832 status
= connector_status_disconnected
;
4836 intel_dp_set_edid(intel_dp
);
4838 if (intel_encoder
->type
!= INTEL_OUTPUT_EDP
)
4839 intel_encoder
->type
= INTEL_OUTPUT_DISPLAYPORT
;
4840 status
= connector_status_connected
;
4842 /* Try to read the source of the interrupt */
4843 if (intel_dp
->dpcd
[DP_DPCD_REV
] >= 0x11 &&
4844 intel_dp_get_sink_irq(intel_dp
, &sink_irq_vector
)) {
4845 /* Clear interrupt source */
4846 drm_dp_dpcd_writeb(&intel_dp
->aux
,
4847 DP_DEVICE_SERVICE_IRQ_VECTOR
,
4850 if (sink_irq_vector
& DP_AUTOMATED_TEST_REQUEST
)
4851 intel_dp_handle_test_request(intel_dp
);
4852 if (sink_irq_vector
& (DP_CP_IRQ
| DP_SINK_SPECIFIC_IRQ
))
4853 DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
4857 intel_dp_power_put(intel_dp
, power_domain
);
4862 intel_dp_force(struct drm_connector
*connector
)
4864 struct intel_dp
*intel_dp
= intel_attached_dp(connector
);
4865 struct intel_encoder
*intel_encoder
= &dp_to_dig_port(intel_dp
)->base
;
4866 enum intel_display_power_domain power_domain
;
4868 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
4869 connector
->base
.id
, connector
->name
);
4870 intel_dp_unset_edid(intel_dp
);
4872 if (connector
->status
!= connector_status_connected
)
4875 power_domain
= intel_dp_power_get(intel_dp
);
4877 intel_dp_set_edid(intel_dp
);
4879 intel_dp_power_put(intel_dp
, power_domain
);
4881 if (intel_encoder
->type
!= INTEL_OUTPUT_EDP
)
4882 intel_encoder
->type
= INTEL_OUTPUT_DISPLAYPORT
;
4885 static int intel_dp_get_modes(struct drm_connector
*connector
)
4887 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
4890 edid
= intel_connector
->detect_edid
;
4892 int ret
= intel_connector_update_modes(connector
, edid
);
4897 /* if eDP has no EDID, fall back to fixed mode */
4898 if (is_edp(intel_attached_dp(connector
)) &&
4899 intel_connector
->panel
.fixed_mode
) {
4900 struct drm_display_mode
*mode
;
4902 mode
= drm_mode_duplicate(connector
->dev
,
4903 intel_connector
->panel
.fixed_mode
);
4905 drm_mode_probed_add(connector
, mode
);
4914 intel_dp_detect_audio(struct drm_connector
*connector
)
4916 bool has_audio
= false;
4919 edid
= to_intel_connector(connector
)->detect_edid
;
4921 has_audio
= drm_detect_monitor_audio(edid
);
4927 intel_dp_set_property(struct drm_connector
*connector
,
4928 struct drm_property
*property
,
4931 struct drm_i915_private
*dev_priv
= connector
->dev
->dev_private
;
4932 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
4933 struct intel_encoder
*intel_encoder
= intel_attached_encoder(connector
);
4934 struct intel_dp
*intel_dp
= enc_to_intel_dp(&intel_encoder
->base
);
4937 ret
= drm_object_property_set_value(&connector
->base
, property
, val
);
4941 if (property
== dev_priv
->force_audio_property
) {
4945 if (i
== intel_dp
->force_audio
)
4948 intel_dp
->force_audio
= i
;
4950 if (i
== HDMI_AUDIO_AUTO
)
4951 has_audio
= intel_dp_detect_audio(connector
);
4953 has_audio
= (i
== HDMI_AUDIO_ON
);
4955 if (has_audio
== intel_dp
->has_audio
)
4958 intel_dp
->has_audio
= has_audio
;
4962 if (property
== dev_priv
->broadcast_rgb_property
) {
4963 bool old_auto
= intel_dp
->color_range_auto
;
4964 bool old_range
= intel_dp
->limited_color_range
;
4967 case INTEL_BROADCAST_RGB_AUTO
:
4968 intel_dp
->color_range_auto
= true;
4970 case INTEL_BROADCAST_RGB_FULL
:
4971 intel_dp
->color_range_auto
= false;
4972 intel_dp
->limited_color_range
= false;
4974 case INTEL_BROADCAST_RGB_LIMITED
:
4975 intel_dp
->color_range_auto
= false;
4976 intel_dp
->limited_color_range
= true;
4982 if (old_auto
== intel_dp
->color_range_auto
&&
4983 old_range
== intel_dp
->limited_color_range
)
4989 if (is_edp(intel_dp
) &&
4990 property
== connector
->dev
->mode_config
.scaling_mode_property
) {
4991 if (val
== DRM_MODE_SCALE_NONE
) {
4992 DRM_DEBUG_KMS("no scaling not supported\n");
4996 if (intel_connector
->panel
.fitting_mode
== val
) {
4997 /* the eDP scaling property is not changed */
5000 intel_connector
->panel
.fitting_mode
= val
;
5008 if (intel_encoder
->base
.crtc
)
5009 intel_crtc_restore_mode(intel_encoder
->base
.crtc
);
5015 intel_dp_connector_destroy(struct drm_connector
*connector
)
5017 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
5019 kfree(intel_connector
->detect_edid
);
5021 if (!IS_ERR_OR_NULL(intel_connector
->edid
))
5022 kfree(intel_connector
->edid
);
5024 /* Can't call is_edp() since the encoder may have been destroyed
5026 if (connector
->connector_type
== DRM_MODE_CONNECTOR_eDP
)
5027 intel_panel_fini(&intel_connector
->panel
);
5029 drm_connector_cleanup(connector
);
5033 void intel_dp_encoder_destroy(struct drm_encoder
*encoder
)
5035 struct intel_digital_port
*intel_dig_port
= enc_to_dig_port(encoder
);
5036 struct intel_dp
*intel_dp
= &intel_dig_port
->dp
;
5038 drm_dp_aux_unregister(&intel_dp
->aux
);
5039 intel_dp_mst_encoder_cleanup(intel_dig_port
);
5040 if (is_edp(intel_dp
)) {
5041 cancel_delayed_work_sync(&intel_dp
->panel_vdd_work
);
5043 * vdd might still be enabled do to the delayed vdd off.
5044 * Make sure vdd is actually turned off here.
5047 edp_panel_vdd_off_sync(intel_dp
);
5048 pps_unlock(intel_dp
);
5050 if (intel_dp
->edp_notifier
.notifier_call
) {
5051 unregister_reboot_notifier(&intel_dp
->edp_notifier
);
5052 intel_dp
->edp_notifier
.notifier_call
= NULL
;
5055 drm_encoder_cleanup(encoder
);
5056 kfree(intel_dig_port
);
5059 static void intel_dp_encoder_suspend(struct intel_encoder
*intel_encoder
)
5061 struct intel_dp
*intel_dp
= enc_to_intel_dp(&intel_encoder
->base
);
5063 if (!is_edp(intel_dp
))
5067 * vdd might still be enabled do to the delayed vdd off.
5068 * Make sure vdd is actually turned off here.
5070 cancel_delayed_work_sync(&intel_dp
->panel_vdd_work
);
5072 edp_panel_vdd_off_sync(intel_dp
);
5073 pps_unlock(intel_dp
);
5076 static void intel_edp_panel_vdd_sanitize(struct intel_dp
*intel_dp
)
5078 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
5079 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
5080 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5081 enum intel_display_power_domain power_domain
;
5083 lockdep_assert_held(&dev_priv
->pps_mutex
);
5085 if (!edp_have_panel_vdd(intel_dp
))
5089 * The VDD bit needs a power domain reference, so if the bit is
5090 * already enabled when we boot or resume, grab this reference and
5091 * schedule a vdd off, so we don't hold on to the reference
5094 DRM_DEBUG_KMS("VDD left on by BIOS, adjusting state tracking\n");
5095 power_domain
= intel_display_port_power_domain(&intel_dig_port
->base
);
5096 intel_display_power_get(dev_priv
, power_domain
);
5098 edp_panel_vdd_schedule_off(intel_dp
);
5101 static void intel_dp_encoder_reset(struct drm_encoder
*encoder
)
5103 struct intel_dp
*intel_dp
;
5105 if (to_intel_encoder(encoder
)->type
!= INTEL_OUTPUT_EDP
)
5108 intel_dp
= enc_to_intel_dp(encoder
);
5113 * Read out the current power sequencer assignment,
5114 * in case the BIOS did something with it.
5116 if (IS_VALLEYVIEW(encoder
->dev
))
5117 vlv_initial_power_sequencer_setup(intel_dp
);
5119 intel_edp_panel_vdd_sanitize(intel_dp
);
5121 pps_unlock(intel_dp
);
5124 static const struct drm_connector_funcs intel_dp_connector_funcs
= {
5125 .dpms
= drm_atomic_helper_connector_dpms
,
5126 .detect
= intel_dp_detect
,
5127 .force
= intel_dp_force
,
5128 .fill_modes
= drm_helper_probe_single_connector_modes
,
5129 .set_property
= intel_dp_set_property
,
5130 .atomic_get_property
= intel_connector_atomic_get_property
,
5131 .destroy
= intel_dp_connector_destroy
,
5132 .atomic_destroy_state
= drm_atomic_helper_connector_destroy_state
,
5133 .atomic_duplicate_state
= drm_atomic_helper_connector_duplicate_state
,
5136 static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs
= {
5137 .get_modes
= intel_dp_get_modes
,
5138 .mode_valid
= intel_dp_mode_valid
,
5139 .best_encoder
= intel_best_encoder
,
5142 static const struct drm_encoder_funcs intel_dp_enc_funcs
= {
5143 .reset
= intel_dp_encoder_reset
,
5144 .destroy
= intel_dp_encoder_destroy
,
5148 intel_dp_hpd_pulse(struct intel_digital_port
*intel_dig_port
, bool long_hpd
)
5150 struct intel_dp
*intel_dp
= &intel_dig_port
->dp
;
5151 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
5152 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
5153 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5154 enum intel_display_power_domain power_domain
;
5155 enum irqreturn ret
= IRQ_NONE
;
5157 if (intel_dig_port
->base
.type
!= INTEL_OUTPUT_EDP
)
5158 intel_dig_port
->base
.type
= INTEL_OUTPUT_DISPLAYPORT
;
5160 if (long_hpd
&& intel_dig_port
->base
.type
== INTEL_OUTPUT_EDP
) {
5162 * vdd off can generate a long pulse on eDP which
5163 * would require vdd on to handle it, and thus we
5164 * would end up in an endless cycle of
5165 * "vdd off -> long hpd -> vdd on -> detect -> vdd off -> ..."
5167 DRM_DEBUG_KMS("ignoring long hpd on eDP port %c\n",
5168 port_name(intel_dig_port
->port
));
5172 DRM_DEBUG_KMS("got hpd irq on port %c - %s\n",
5173 port_name(intel_dig_port
->port
),
5174 long_hpd
? "long" : "short");
5176 power_domain
= intel_display_port_power_domain(intel_encoder
);
5177 intel_display_power_get(dev_priv
, power_domain
);
5180 /* indicate that we need to restart link training */
5181 intel_dp
->train_set_valid
= false;
5183 if (!intel_digital_port_connected(dev_priv
, intel_dig_port
))
5186 if (!intel_dp_get_dpcd(intel_dp
)) {
5190 intel_dp_probe_oui(intel_dp
);
5192 if (!intel_dp_probe_mst(intel_dp
)) {
5193 drm_modeset_lock(&dev
->mode_config
.connection_mutex
, NULL
);
5194 intel_dp_check_link_status(intel_dp
);
5195 drm_modeset_unlock(&dev
->mode_config
.connection_mutex
);
5199 if (intel_dp
->is_mst
) {
5200 if (intel_dp_check_mst_status(intel_dp
) == -EINVAL
)
5204 if (!intel_dp
->is_mst
) {
5205 drm_modeset_lock(&dev
->mode_config
.connection_mutex
, NULL
);
5206 intel_dp_check_link_status(intel_dp
);
5207 drm_modeset_unlock(&dev
->mode_config
.connection_mutex
);
5215 /* if we were in MST mode, and device is not there get out of MST mode */
5216 if (intel_dp
->is_mst
) {
5217 DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n", intel_dp
->is_mst
, intel_dp
->mst_mgr
.mst_state
);
5218 intel_dp
->is_mst
= false;
5219 drm_dp_mst_topology_mgr_set_mst(&intel_dp
->mst_mgr
, intel_dp
->is_mst
);
5222 intel_display_power_put(dev_priv
, power_domain
);
5227 /* Return which DP Port should be selected for Transcoder DP control */
5229 intel_trans_dp_port_sel(struct drm_crtc
*crtc
)
5231 struct drm_device
*dev
= crtc
->dev
;
5232 struct intel_encoder
*intel_encoder
;
5233 struct intel_dp
*intel_dp
;
5235 for_each_encoder_on_crtc(dev
, crtc
, intel_encoder
) {
5236 intel_dp
= enc_to_intel_dp(&intel_encoder
->base
);
5238 if (intel_encoder
->type
== INTEL_OUTPUT_DISPLAYPORT
||
5239 intel_encoder
->type
== INTEL_OUTPUT_EDP
)
5240 return intel_dp
->output_reg
;
5246 /* check the VBT to see whether the eDP is on another port */
5247 bool intel_dp_is_edp(struct drm_device
*dev
, enum port port
)
5249 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5250 union child_device_config
*p_child
;
5252 static const short port_mapping
[] = {
5253 [PORT_B
] = DVO_PORT_DPB
,
5254 [PORT_C
] = DVO_PORT_DPC
,
5255 [PORT_D
] = DVO_PORT_DPD
,
5256 [PORT_E
] = DVO_PORT_DPE
,
5260 * eDP not supported on g4x. so bail out early just
5261 * for a bit extra safety in case the VBT is bonkers.
5263 if (INTEL_INFO(dev
)->gen
< 5)
5269 if (!dev_priv
->vbt
.child_dev_num
)
5272 for (i
= 0; i
< dev_priv
->vbt
.child_dev_num
; i
++) {
5273 p_child
= dev_priv
->vbt
.child_dev
+ i
;
5275 if (p_child
->common
.dvo_port
== port_mapping
[port
] &&
5276 (p_child
->common
.device_type
& DEVICE_TYPE_eDP_BITS
) ==
5277 (DEVICE_TYPE_eDP
& DEVICE_TYPE_eDP_BITS
))
5284 intel_dp_add_properties(struct intel_dp
*intel_dp
, struct drm_connector
*connector
)
5286 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
5288 intel_attach_force_audio_property(connector
);
5289 intel_attach_broadcast_rgb_property(connector
);
5290 intel_dp
->color_range_auto
= true;
5292 if (is_edp(intel_dp
)) {
5293 drm_mode_create_scaling_mode_property(connector
->dev
);
5294 drm_object_attach_property(
5296 connector
->dev
->mode_config
.scaling_mode_property
,
5297 DRM_MODE_SCALE_ASPECT
);
5298 intel_connector
->panel
.fitting_mode
= DRM_MODE_SCALE_ASPECT
;
5302 static void intel_dp_init_panel_power_timestamps(struct intel_dp
*intel_dp
)
5304 intel_dp
->last_power_cycle
= jiffies
;
5305 intel_dp
->last_power_on
= jiffies
;
5306 intel_dp
->last_backlight_off
= jiffies
;
5310 intel_dp_init_panel_power_sequencer(struct drm_device
*dev
,
5311 struct intel_dp
*intel_dp
)
5313 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5314 struct edp_power_seq cur
, vbt
, spec
,
5315 *final
= &intel_dp
->pps_delays
;
5316 u32 pp_on
, pp_off
, pp_div
= 0, pp_ctl
= 0;
5317 int pp_ctrl_reg
, pp_on_reg
, pp_off_reg
, pp_div_reg
= 0;
5319 lockdep_assert_held(&dev_priv
->pps_mutex
);
5321 /* already initialized? */
5322 if (final
->t11_t12
!= 0)
5325 if (IS_BROXTON(dev
)) {
5327 * TODO: BXT has 2 sets of PPS registers.
5328 * Correct Register for Broxton need to be identified
5329 * using VBT. hardcoding for now
5331 pp_ctrl_reg
= BXT_PP_CONTROL(0);
5332 pp_on_reg
= BXT_PP_ON_DELAYS(0);
5333 pp_off_reg
= BXT_PP_OFF_DELAYS(0);
5334 } else if (HAS_PCH_SPLIT(dev
)) {
5335 pp_ctrl_reg
= PCH_PP_CONTROL
;
5336 pp_on_reg
= PCH_PP_ON_DELAYS
;
5337 pp_off_reg
= PCH_PP_OFF_DELAYS
;
5338 pp_div_reg
= PCH_PP_DIVISOR
;
5340 enum pipe pipe
= vlv_power_sequencer_pipe(intel_dp
);
5342 pp_ctrl_reg
= VLV_PIPE_PP_CONTROL(pipe
);
5343 pp_on_reg
= VLV_PIPE_PP_ON_DELAYS(pipe
);
5344 pp_off_reg
= VLV_PIPE_PP_OFF_DELAYS(pipe
);
5345 pp_div_reg
= VLV_PIPE_PP_DIVISOR(pipe
);
5348 /* Workaround: Need to write PP_CONTROL with the unlock key as
5349 * the very first thing. */
5350 pp_ctl
= ironlake_get_pp_control(intel_dp
);
5352 pp_on
= I915_READ(pp_on_reg
);
5353 pp_off
= I915_READ(pp_off_reg
);
5354 if (!IS_BROXTON(dev
)) {
5355 I915_WRITE(pp_ctrl_reg
, pp_ctl
);
5356 pp_div
= I915_READ(pp_div_reg
);
5359 /* Pull timing values out of registers */
5360 cur
.t1_t3
= (pp_on
& PANEL_POWER_UP_DELAY_MASK
) >>
5361 PANEL_POWER_UP_DELAY_SHIFT
;
5363 cur
.t8
= (pp_on
& PANEL_LIGHT_ON_DELAY_MASK
) >>
5364 PANEL_LIGHT_ON_DELAY_SHIFT
;
5366 cur
.t9
= (pp_off
& PANEL_LIGHT_OFF_DELAY_MASK
) >>
5367 PANEL_LIGHT_OFF_DELAY_SHIFT
;
5369 cur
.t10
= (pp_off
& PANEL_POWER_DOWN_DELAY_MASK
) >>
5370 PANEL_POWER_DOWN_DELAY_SHIFT
;
5372 if (IS_BROXTON(dev
)) {
5373 u16 tmp
= (pp_ctl
& BXT_POWER_CYCLE_DELAY_MASK
) >>
5374 BXT_POWER_CYCLE_DELAY_SHIFT
;
5376 cur
.t11_t12
= (tmp
- 1) * 1000;
5380 cur
.t11_t12
= ((pp_div
& PANEL_POWER_CYCLE_DELAY_MASK
) >>
5381 PANEL_POWER_CYCLE_DELAY_SHIFT
) * 1000;
5384 DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
5385 cur
.t1_t3
, cur
.t8
, cur
.t9
, cur
.t10
, cur
.t11_t12
);
5387 vbt
= dev_priv
->vbt
.edp_pps
;
5389 /* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
5390 * our hw here, which are all in 100usec. */
5391 spec
.t1_t3
= 210 * 10;
5392 spec
.t8
= 50 * 10; /* no limit for t8, use t7 instead */
5393 spec
.t9
= 50 * 10; /* no limit for t9, make it symmetric with t8 */
5394 spec
.t10
= 500 * 10;
5395 /* This one is special and actually in units of 100ms, but zero
5396 * based in the hw (so we need to add 100 ms). But the sw vbt
5397 * table multiplies it with 1000 to make it in units of 100usec,
5399 spec
.t11_t12
= (510 + 100) * 10;
5401 DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
5402 vbt
.t1_t3
, vbt
.t8
, vbt
.t9
, vbt
.t10
, vbt
.t11_t12
);
5404 /* Use the max of the register settings and vbt. If both are
5405 * unset, fall back to the spec limits. */
5406 #define assign_final(field) final->field = (max(cur.field, vbt.field) == 0 ? \
5408 max(cur.field, vbt.field))
5409 assign_final(t1_t3
);
5413 assign_final(t11_t12
);
5416 #define get_delay(field) (DIV_ROUND_UP(final->field, 10))
5417 intel_dp
->panel_power_up_delay
= get_delay(t1_t3
);
5418 intel_dp
->backlight_on_delay
= get_delay(t8
);
5419 intel_dp
->backlight_off_delay
= get_delay(t9
);
5420 intel_dp
->panel_power_down_delay
= get_delay(t10
);
5421 intel_dp
->panel_power_cycle_delay
= get_delay(t11_t12
);
5424 DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
5425 intel_dp
->panel_power_up_delay
, intel_dp
->panel_power_down_delay
,
5426 intel_dp
->panel_power_cycle_delay
);
5428 DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
5429 intel_dp
->backlight_on_delay
, intel_dp
->backlight_off_delay
);
5433 intel_dp_init_panel_power_sequencer_registers(struct drm_device
*dev
,
5434 struct intel_dp
*intel_dp
)
5436 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5437 u32 pp_on
, pp_off
, pp_div
, port_sel
= 0;
5438 int div
= HAS_PCH_SPLIT(dev
) ? intel_pch_rawclk(dev
) : intel_hrawclk(dev
);
5439 int pp_on_reg
, pp_off_reg
, pp_div_reg
= 0, pp_ctrl_reg
;
5440 enum port port
= dp_to_dig_port(intel_dp
)->port
;
5441 const struct edp_power_seq
*seq
= &intel_dp
->pps_delays
;
5443 lockdep_assert_held(&dev_priv
->pps_mutex
);
5445 if (IS_BROXTON(dev
)) {
5447 * TODO: BXT has 2 sets of PPS registers.
5448 * Correct Register for Broxton need to be identified
5449 * using VBT. hardcoding for now
5451 pp_ctrl_reg
= BXT_PP_CONTROL(0);
5452 pp_on_reg
= BXT_PP_ON_DELAYS(0);
5453 pp_off_reg
= BXT_PP_OFF_DELAYS(0);
5455 } else if (HAS_PCH_SPLIT(dev
)) {
5456 pp_on_reg
= PCH_PP_ON_DELAYS
;
5457 pp_off_reg
= PCH_PP_OFF_DELAYS
;
5458 pp_div_reg
= PCH_PP_DIVISOR
;
5460 enum pipe pipe
= vlv_power_sequencer_pipe(intel_dp
);
5462 pp_on_reg
= VLV_PIPE_PP_ON_DELAYS(pipe
);
5463 pp_off_reg
= VLV_PIPE_PP_OFF_DELAYS(pipe
);
5464 pp_div_reg
= VLV_PIPE_PP_DIVISOR(pipe
);
5468 * And finally store the new values in the power sequencer. The
5469 * backlight delays are set to 1 because we do manual waits on them. For
5470 * T8, even BSpec recommends doing it. For T9, if we don't do this,
5471 * we'll end up waiting for the backlight off delay twice: once when we
5472 * do the manual sleep, and once when we disable the panel and wait for
5473 * the PP_STATUS bit to become zero.
5475 pp_on
= (seq
->t1_t3
<< PANEL_POWER_UP_DELAY_SHIFT
) |
5476 (1 << PANEL_LIGHT_ON_DELAY_SHIFT
);
5477 pp_off
= (1 << PANEL_LIGHT_OFF_DELAY_SHIFT
) |
5478 (seq
->t10
<< PANEL_POWER_DOWN_DELAY_SHIFT
);
5479 /* Compute the divisor for the pp clock, simply match the Bspec
5481 if (IS_BROXTON(dev
)) {
5482 pp_div
= I915_READ(pp_ctrl_reg
);
5483 pp_div
&= ~BXT_POWER_CYCLE_DELAY_MASK
;
5484 pp_div
|= (DIV_ROUND_UP((seq
->t11_t12
+ 1), 1000)
5485 << BXT_POWER_CYCLE_DELAY_SHIFT
);
5487 pp_div
= ((100 * div
)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT
;
5488 pp_div
|= (DIV_ROUND_UP(seq
->t11_t12
, 1000)
5489 << PANEL_POWER_CYCLE_DELAY_SHIFT
);
5492 /* Haswell doesn't have any port selection bits for the panel
5493 * power sequencer any more. */
5494 if (IS_VALLEYVIEW(dev
)) {
5495 port_sel
= PANEL_PORT_SELECT_VLV(port
);
5496 } else if (HAS_PCH_IBX(dev
) || HAS_PCH_CPT(dev
)) {
5498 port_sel
= PANEL_PORT_SELECT_DPA
;
5500 port_sel
= PANEL_PORT_SELECT_DPD
;
5505 I915_WRITE(pp_on_reg
, pp_on
);
5506 I915_WRITE(pp_off_reg
, pp_off
);
5507 if (IS_BROXTON(dev
))
5508 I915_WRITE(pp_ctrl_reg
, pp_div
);
5510 I915_WRITE(pp_div_reg
, pp_div
);
5512 DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
5513 I915_READ(pp_on_reg
),
5514 I915_READ(pp_off_reg
),
5516 (I915_READ(pp_ctrl_reg
) & BXT_POWER_CYCLE_DELAY_MASK
) :
5517 I915_READ(pp_div_reg
));
5521 * intel_dp_set_drrs_state - program registers for RR switch to take effect
5523 * @refresh_rate: RR to be programmed
5525 * This function gets called when refresh rate (RR) has to be changed from
5526 * one frequency to another. Switches can be between high and low RR
5527 * supported by the panel or to any other RR based on media playback (in
5528 * this case, RR value needs to be passed from user space).
5530 * The caller of this function needs to take a lock on dev_priv->drrs.
5532 static void intel_dp_set_drrs_state(struct drm_device
*dev
, int refresh_rate
)
5534 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5535 struct intel_encoder
*encoder
;
5536 struct intel_digital_port
*dig_port
= NULL
;
5537 struct intel_dp
*intel_dp
= dev_priv
->drrs
.dp
;
5538 struct intel_crtc_state
*config
= NULL
;
5539 struct intel_crtc
*intel_crtc
= NULL
;
5541 enum drrs_refresh_rate_type index
= DRRS_HIGH_RR
;
5543 if (refresh_rate
<= 0) {
5544 DRM_DEBUG_KMS("Refresh rate should be positive non-zero.\n");
5548 if (intel_dp
== NULL
) {
5549 DRM_DEBUG_KMS("DRRS not supported.\n");
5554 * FIXME: This needs proper synchronization with psr state for some
5555 * platforms that cannot have PSR and DRRS enabled at the same time.
5558 dig_port
= dp_to_dig_port(intel_dp
);
5559 encoder
= &dig_port
->base
;
5560 intel_crtc
= to_intel_crtc(encoder
->base
.crtc
);
5563 DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n");
5567 config
= intel_crtc
->config
;
5569 if (dev_priv
->drrs
.type
< SEAMLESS_DRRS_SUPPORT
) {
5570 DRM_DEBUG_KMS("Only Seamless DRRS supported.\n");
5574 if (intel_dp
->attached_connector
->panel
.downclock_mode
->vrefresh
==
5576 index
= DRRS_LOW_RR
;
5578 if (index
== dev_priv
->drrs
.refresh_rate_type
) {
5580 "DRRS requested for previously set RR...ignoring\n");
5584 if (!intel_crtc
->active
) {
5585 DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n");
5589 if (INTEL_INFO(dev
)->gen
>= 8 && !IS_CHERRYVIEW(dev
)) {
5592 intel_dp_set_m_n(intel_crtc
, M1_N1
);
5595 intel_dp_set_m_n(intel_crtc
, M2_N2
);
5599 DRM_ERROR("Unsupported refreshrate type\n");
5601 } else if (INTEL_INFO(dev
)->gen
> 6) {
5602 reg
= PIPECONF(intel_crtc
->config
->cpu_transcoder
);
5603 val
= I915_READ(reg
);
5605 if (index
> DRRS_HIGH_RR
) {
5606 if (IS_VALLEYVIEW(dev
))
5607 val
|= PIPECONF_EDP_RR_MODE_SWITCH_VLV
;
5609 val
|= PIPECONF_EDP_RR_MODE_SWITCH
;
5611 if (IS_VALLEYVIEW(dev
))
5612 val
&= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV
;
5614 val
&= ~PIPECONF_EDP_RR_MODE_SWITCH
;
5616 I915_WRITE(reg
, val
);
5619 dev_priv
->drrs
.refresh_rate_type
= index
;
5621 DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate
);
5625 * intel_edp_drrs_enable - init drrs struct if supported
5626 * @intel_dp: DP struct
5628 * Initializes frontbuffer_bits and drrs.dp
5630 void intel_edp_drrs_enable(struct intel_dp
*intel_dp
)
5632 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
5633 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5634 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
5635 struct drm_crtc
*crtc
= dig_port
->base
.base
.crtc
;
5636 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
5638 if (!intel_crtc
->config
->has_drrs
) {
5639 DRM_DEBUG_KMS("Panel doesn't support DRRS\n");
5643 mutex_lock(&dev_priv
->drrs
.mutex
);
5644 if (WARN_ON(dev_priv
->drrs
.dp
)) {
5645 DRM_ERROR("DRRS already enabled\n");
5649 dev_priv
->drrs
.busy_frontbuffer_bits
= 0;
5651 dev_priv
->drrs
.dp
= intel_dp
;
5654 mutex_unlock(&dev_priv
->drrs
.mutex
);
5658 * intel_edp_drrs_disable - Disable DRRS
5659 * @intel_dp: DP struct
5662 void intel_edp_drrs_disable(struct intel_dp
*intel_dp
)
5664 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
5665 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5666 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
5667 struct drm_crtc
*crtc
= dig_port
->base
.base
.crtc
;
5668 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
5670 if (!intel_crtc
->config
->has_drrs
)
5673 mutex_lock(&dev_priv
->drrs
.mutex
);
5674 if (!dev_priv
->drrs
.dp
) {
5675 mutex_unlock(&dev_priv
->drrs
.mutex
);
5679 if (dev_priv
->drrs
.refresh_rate_type
== DRRS_LOW_RR
)
5680 intel_dp_set_drrs_state(dev_priv
->dev
,
5681 intel_dp
->attached_connector
->panel
.
5682 fixed_mode
->vrefresh
);
5684 dev_priv
->drrs
.dp
= NULL
;
5685 mutex_unlock(&dev_priv
->drrs
.mutex
);
5687 cancel_delayed_work_sync(&dev_priv
->drrs
.work
);
5690 static void intel_edp_drrs_downclock_work(struct work_struct
*work
)
5692 struct drm_i915_private
*dev_priv
=
5693 container_of(work
, typeof(*dev_priv
), drrs
.work
.work
);
5694 struct intel_dp
*intel_dp
;
5696 mutex_lock(&dev_priv
->drrs
.mutex
);
5698 intel_dp
= dev_priv
->drrs
.dp
;
5704 * The delayed work can race with an invalidate hence we need to
5708 if (dev_priv
->drrs
.busy_frontbuffer_bits
)
5711 if (dev_priv
->drrs
.refresh_rate_type
!= DRRS_LOW_RR
)
5712 intel_dp_set_drrs_state(dev_priv
->dev
,
5713 intel_dp
->attached_connector
->panel
.
5714 downclock_mode
->vrefresh
);
5717 mutex_unlock(&dev_priv
->drrs
.mutex
);
5721 * intel_edp_drrs_invalidate - Disable Idleness DRRS
5723 * @frontbuffer_bits: frontbuffer plane tracking bits
5725 * This function gets called everytime rendering on the given planes start.
5726 * Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR).
5728 * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
5730 void intel_edp_drrs_invalidate(struct drm_device
*dev
,
5731 unsigned frontbuffer_bits
)
5733 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5734 struct drm_crtc
*crtc
;
5737 if (dev_priv
->drrs
.type
== DRRS_NOT_SUPPORTED
)
5740 cancel_delayed_work(&dev_priv
->drrs
.work
);
5742 mutex_lock(&dev_priv
->drrs
.mutex
);
5743 if (!dev_priv
->drrs
.dp
) {
5744 mutex_unlock(&dev_priv
->drrs
.mutex
);
5748 crtc
= dp_to_dig_port(dev_priv
->drrs
.dp
)->base
.base
.crtc
;
5749 pipe
= to_intel_crtc(crtc
)->pipe
;
5751 frontbuffer_bits
&= INTEL_FRONTBUFFER_ALL_MASK(pipe
);
5752 dev_priv
->drrs
.busy_frontbuffer_bits
|= frontbuffer_bits
;
5754 /* invalidate means busy screen hence upclock */
5755 if (frontbuffer_bits
&& dev_priv
->drrs
.refresh_rate_type
== DRRS_LOW_RR
)
5756 intel_dp_set_drrs_state(dev_priv
->dev
,
5757 dev_priv
->drrs
.dp
->attached_connector
->panel
.
5758 fixed_mode
->vrefresh
);
5760 mutex_unlock(&dev_priv
->drrs
.mutex
);
5764 * intel_edp_drrs_flush - Restart Idleness DRRS
5766 * @frontbuffer_bits: frontbuffer plane tracking bits
5768 * This function gets called every time rendering on the given planes has
5769 * completed or flip on a crtc is completed. So DRRS should be upclocked
5770 * (LOW_RR -> HIGH_RR). And also Idleness detection should be started again,
5771 * if no other planes are dirty.
5773 * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
5775 void intel_edp_drrs_flush(struct drm_device
*dev
,
5776 unsigned frontbuffer_bits
)
5778 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5779 struct drm_crtc
*crtc
;
5782 if (dev_priv
->drrs
.type
== DRRS_NOT_SUPPORTED
)
5785 cancel_delayed_work(&dev_priv
->drrs
.work
);
5787 mutex_lock(&dev_priv
->drrs
.mutex
);
5788 if (!dev_priv
->drrs
.dp
) {
5789 mutex_unlock(&dev_priv
->drrs
.mutex
);
5793 crtc
= dp_to_dig_port(dev_priv
->drrs
.dp
)->base
.base
.crtc
;
5794 pipe
= to_intel_crtc(crtc
)->pipe
;
5796 frontbuffer_bits
&= INTEL_FRONTBUFFER_ALL_MASK(pipe
);
5797 dev_priv
->drrs
.busy_frontbuffer_bits
&= ~frontbuffer_bits
;
5799 /* flush means busy screen hence upclock */
5800 if (frontbuffer_bits
&& dev_priv
->drrs
.refresh_rate_type
== DRRS_LOW_RR
)
5801 intel_dp_set_drrs_state(dev_priv
->dev
,
5802 dev_priv
->drrs
.dp
->attached_connector
->panel
.
5803 fixed_mode
->vrefresh
);
5806 * flush also means no more activity hence schedule downclock, if all
5807 * other fbs are quiescent too
5809 if (!dev_priv
->drrs
.busy_frontbuffer_bits
)
5810 schedule_delayed_work(&dev_priv
->drrs
.work
,
5811 msecs_to_jiffies(1000));
5812 mutex_unlock(&dev_priv
->drrs
.mutex
);
5816 * DOC: Display Refresh Rate Switching (DRRS)
5818 * Display Refresh Rate Switching (DRRS) is a power conservation feature
5819 * which enables swtching between low and high refresh rates,
5820 * dynamically, based on the usage scenario. This feature is applicable
5821 * for internal panels.
5823 * Indication that the panel supports DRRS is given by the panel EDID, which
5824 * would list multiple refresh rates for one resolution.
5826 * DRRS is of 2 types - static and seamless.
5827 * Static DRRS involves changing refresh rate (RR) by doing a full modeset
5828 * (may appear as a blink on screen) and is used in dock-undock scenario.
5829 * Seamless DRRS involves changing RR without any visual effect to the user
5830 * and can be used during normal system usage. This is done by programming
5831 * certain registers.
5833 * Support for static/seamless DRRS may be indicated in the VBT based on
5834 * inputs from the panel spec.
5836 * DRRS saves power by switching to low RR based on usage scenarios.
5839 * The implementation is based on frontbuffer tracking implementation.
5840 * When there is a disturbance on the screen triggered by user activity or a
5841 * periodic system activity, DRRS is disabled (RR is changed to high RR).
5842 * When there is no movement on screen, after a timeout of 1 second, a switch
5843 * to low RR is made.
5844 * For integration with frontbuffer tracking code,
5845 * intel_edp_drrs_invalidate() and intel_edp_drrs_flush() are called.
5847 * DRRS can be further extended to support other internal panels and also
5848 * the scenario of video playback wherein RR is set based on the rate
5849 * requested by userspace.
5853 * intel_dp_drrs_init - Init basic DRRS work and mutex.
5854 * @intel_connector: eDP connector
5855 * @fixed_mode: preferred mode of panel
5857 * This function is called only once at driver load to initialize basic
5861 * Downclock mode if panel supports it, else return NULL.
5862 * DRRS support is determined by the presence of downclock mode (apart
5863 * from VBT setting).
5865 static struct drm_display_mode
*
5866 intel_dp_drrs_init(struct intel_connector
*intel_connector
,
5867 struct drm_display_mode
*fixed_mode
)
5869 struct drm_connector
*connector
= &intel_connector
->base
;
5870 struct drm_device
*dev
= connector
->dev
;
5871 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5872 struct drm_display_mode
*downclock_mode
= NULL
;
5874 INIT_DELAYED_WORK(&dev_priv
->drrs
.work
, intel_edp_drrs_downclock_work
);
5875 mutex_init(&dev_priv
->drrs
.mutex
);
5877 if (INTEL_INFO(dev
)->gen
<= 6) {
5878 DRM_DEBUG_KMS("DRRS supported for Gen7 and above\n");
5882 if (dev_priv
->vbt
.drrs_type
!= SEAMLESS_DRRS_SUPPORT
) {
5883 DRM_DEBUG_KMS("VBT doesn't support DRRS\n");
5887 downclock_mode
= intel_find_panel_downclock
5888 (dev
, fixed_mode
, connector
);
5890 if (!downclock_mode
) {
5891 DRM_DEBUG_KMS("Downclock mode is not found. DRRS not supported\n");
5895 dev_priv
->drrs
.type
= dev_priv
->vbt
.drrs_type
;
5897 dev_priv
->drrs
.refresh_rate_type
= DRRS_HIGH_RR
;
5898 DRM_DEBUG_KMS("seamless DRRS supported for eDP panel.\n");
5899 return downclock_mode
;
5902 static bool intel_edp_init_connector(struct intel_dp
*intel_dp
,
5903 struct intel_connector
*intel_connector
)
5905 struct drm_connector
*connector
= &intel_connector
->base
;
5906 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
5907 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
5908 struct drm_device
*dev
= intel_encoder
->base
.dev
;
5909 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5910 struct drm_display_mode
*fixed_mode
= NULL
;
5911 struct drm_display_mode
*downclock_mode
= NULL
;
5913 struct drm_display_mode
*scan
;
5915 enum pipe pipe
= INVALID_PIPE
;
5917 if (!is_edp(intel_dp
))
5921 intel_edp_panel_vdd_sanitize(intel_dp
);
5922 pps_unlock(intel_dp
);
5924 /* Cache DPCD and EDID for edp. */
5925 has_dpcd
= intel_dp_get_dpcd(intel_dp
);
5928 if (intel_dp
->dpcd
[DP_DPCD_REV
] >= 0x11)
5929 dev_priv
->no_aux_handshake
=
5930 intel_dp
->dpcd
[DP_MAX_DOWNSPREAD
] &
5931 DP_NO_AUX_HANDSHAKE_LINK_TRAINING
;
5933 /* if this fails, presume the device is a ghost */
5934 DRM_INFO("failed to retrieve link info, disabling eDP\n");
5938 /* We now know it's not a ghost, init power sequence regs. */
5940 intel_dp_init_panel_power_sequencer_registers(dev
, intel_dp
);
5941 pps_unlock(intel_dp
);
5943 mutex_lock(&dev
->mode_config
.mutex
);
5944 edid
= drm_get_edid(connector
, &intel_dp
->aux
.ddc
);
5946 if (drm_add_edid_modes(connector
, edid
)) {
5947 drm_mode_connector_update_edid_property(connector
,
5949 drm_edid_to_eld(connector
, edid
);
5952 edid
= ERR_PTR(-EINVAL
);
5955 edid
= ERR_PTR(-ENOENT
);
5957 intel_connector
->edid
= edid
;
5959 /* prefer fixed mode from EDID if available */
5960 list_for_each_entry(scan
, &connector
->probed_modes
, head
) {
5961 if ((scan
->type
& DRM_MODE_TYPE_PREFERRED
)) {
5962 fixed_mode
= drm_mode_duplicate(dev
, scan
);
5963 downclock_mode
= intel_dp_drrs_init(
5964 intel_connector
, fixed_mode
);
5969 /* fallback to VBT if available for eDP */
5970 if (!fixed_mode
&& dev_priv
->vbt
.lfp_lvds_vbt_mode
) {
5971 fixed_mode
= drm_mode_duplicate(dev
,
5972 dev_priv
->vbt
.lfp_lvds_vbt_mode
);
5974 fixed_mode
->type
|= DRM_MODE_TYPE_PREFERRED
;
5976 mutex_unlock(&dev
->mode_config
.mutex
);
5978 if (IS_VALLEYVIEW(dev
)) {
5979 intel_dp
->edp_notifier
.notifier_call
= edp_notify_handler
;
5980 register_reboot_notifier(&intel_dp
->edp_notifier
);
5983 * Figure out the current pipe for the initial backlight setup.
5984 * If the current pipe isn't valid, try the PPS pipe, and if that
5985 * fails just assume pipe A.
5987 if (IS_CHERRYVIEW(dev
))
5988 pipe
= DP_PORT_TO_PIPE_CHV(intel_dp
->DP
);
5990 pipe
= PORT_TO_PIPE(intel_dp
->DP
);
5992 if (pipe
!= PIPE_A
&& pipe
!= PIPE_B
)
5993 pipe
= intel_dp
->pps_pipe
;
5995 if (pipe
!= PIPE_A
&& pipe
!= PIPE_B
)
5998 DRM_DEBUG_KMS("using pipe %c for initial backlight setup\n",
6002 intel_panel_init(&intel_connector
->panel
, fixed_mode
, downclock_mode
);
6003 intel_connector
->panel
.backlight
.power
= intel_edp_backlight_power
;
6004 intel_panel_setup_backlight(connector
, pipe
);
6010 intel_dp_init_connector(struct intel_digital_port
*intel_dig_port
,
6011 struct intel_connector
*intel_connector
)
6013 struct drm_connector
*connector
= &intel_connector
->base
;
6014 struct intel_dp
*intel_dp
= &intel_dig_port
->dp
;
6015 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
6016 struct drm_device
*dev
= intel_encoder
->base
.dev
;
6017 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
6018 enum port port
= intel_dig_port
->port
;
6021 intel_dp
->pps_pipe
= INVALID_PIPE
;
6023 /* intel_dp vfuncs */
6024 if (INTEL_INFO(dev
)->gen
>= 9)
6025 intel_dp
->get_aux_clock_divider
= skl_get_aux_clock_divider
;
6026 else if (IS_VALLEYVIEW(dev
))
6027 intel_dp
->get_aux_clock_divider
= vlv_get_aux_clock_divider
;
6028 else if (IS_HASWELL(dev
) || IS_BROADWELL(dev
))
6029 intel_dp
->get_aux_clock_divider
= hsw_get_aux_clock_divider
;
6030 else if (HAS_PCH_SPLIT(dev
))
6031 intel_dp
->get_aux_clock_divider
= ilk_get_aux_clock_divider
;
6033 intel_dp
->get_aux_clock_divider
= i9xx_get_aux_clock_divider
;
6035 if (INTEL_INFO(dev
)->gen
>= 9)
6036 intel_dp
->get_aux_send_ctl
= skl_get_aux_send_ctl
;
6038 intel_dp
->get_aux_send_ctl
= i9xx_get_aux_send_ctl
;
6040 /* Preserve the current hw state. */
6041 intel_dp
->DP
= I915_READ(intel_dp
->output_reg
);
6042 intel_dp
->attached_connector
= intel_connector
;
6044 if (intel_dp_is_edp(dev
, port
))
6045 type
= DRM_MODE_CONNECTOR_eDP
;
6047 type
= DRM_MODE_CONNECTOR_DisplayPort
;
6050 * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
6051 * for DP the encoder type can be set by the caller to
6052 * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
6054 if (type
== DRM_MODE_CONNECTOR_eDP
)
6055 intel_encoder
->type
= INTEL_OUTPUT_EDP
;
6057 /* eDP only on port B and/or C on vlv/chv */
6058 if (WARN_ON(IS_VALLEYVIEW(dev
) && is_edp(intel_dp
) &&
6059 port
!= PORT_B
&& port
!= PORT_C
))
6062 DRM_DEBUG_KMS("Adding %s connector on port %c\n",
6063 type
== DRM_MODE_CONNECTOR_eDP
? "eDP" : "DP",
6066 drm_connector_init(dev
, connector
, &intel_dp_connector_funcs
, type
);
6067 drm_connector_helper_add(connector
, &intel_dp_connector_helper_funcs
);
6069 connector
->interlace_allowed
= true;
6070 connector
->doublescan_allowed
= 0;
6072 INIT_DELAYED_WORK(&intel_dp
->panel_vdd_work
,
6073 edp_panel_vdd_work
);
6075 intel_connector_attach_encoder(intel_connector
, intel_encoder
);
6076 drm_connector_register(connector
);
6079 intel_connector
->get_hw_state
= intel_ddi_connector_get_hw_state
;
6081 intel_connector
->get_hw_state
= intel_connector_get_hw_state
;
6082 intel_connector
->unregister
= intel_dp_connector_unregister
;
6084 /* Set up the hotplug pin. */
6087 intel_encoder
->hpd_pin
= HPD_PORT_A
;
6090 intel_encoder
->hpd_pin
= HPD_PORT_B
;
6091 if (IS_BROXTON(dev_priv
) && (INTEL_REVID(dev
) < BXT_REVID_B0
))
6092 intel_encoder
->hpd_pin
= HPD_PORT_A
;
6095 intel_encoder
->hpd_pin
= HPD_PORT_C
;
6098 intel_encoder
->hpd_pin
= HPD_PORT_D
;
6101 intel_encoder
->hpd_pin
= HPD_PORT_E
;
6107 if (is_edp(intel_dp
)) {
6109 intel_dp_init_panel_power_timestamps(intel_dp
);
6110 if (IS_VALLEYVIEW(dev
))
6111 vlv_initial_power_sequencer_setup(intel_dp
);
6113 intel_dp_init_panel_power_sequencer(dev
, intel_dp
);
6114 pps_unlock(intel_dp
);
6117 intel_dp_aux_init(intel_dp
, intel_connector
);
6119 /* init MST on ports that can support it */
6120 if (HAS_DP_MST(dev
) &&
6121 (port
== PORT_B
|| port
== PORT_C
|| port
== PORT_D
))
6122 intel_dp_mst_encoder_init(intel_dig_port
,
6123 intel_connector
->base
.base
.id
);
6125 if (!intel_edp_init_connector(intel_dp
, intel_connector
)) {
6126 drm_dp_aux_unregister(&intel_dp
->aux
);
6127 if (is_edp(intel_dp
)) {
6128 cancel_delayed_work_sync(&intel_dp
->panel_vdd_work
);
6130 * vdd might still be enabled do to the delayed vdd off.
6131 * Make sure vdd is actually turned off here.
6134 edp_panel_vdd_off_sync(intel_dp
);
6135 pps_unlock(intel_dp
);
6137 drm_connector_unregister(connector
);
6138 drm_connector_cleanup(connector
);
6142 intel_dp_add_properties(intel_dp
, connector
);
6144 /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
6145 * 0xd. Failure to do so will result in spurious interrupts being
6146 * generated on the port when a cable is not attached.
6148 if (IS_G4X(dev
) && !IS_GM45(dev
)) {
6149 u32 temp
= I915_READ(PEG_BAND_GAP_DATA
);
6150 I915_WRITE(PEG_BAND_GAP_DATA
, (temp
& ~0xf) | 0xd);
6153 i915_debugfs_connector_add(connector
);
6159 intel_dp_init(struct drm_device
*dev
, int output_reg
, enum port port
)
6161 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
6162 struct intel_digital_port
*intel_dig_port
;
6163 struct intel_encoder
*intel_encoder
;
6164 struct drm_encoder
*encoder
;
6165 struct intel_connector
*intel_connector
;
6167 intel_dig_port
= kzalloc(sizeof(*intel_dig_port
), GFP_KERNEL
);
6168 if (!intel_dig_port
)
6171 intel_connector
= intel_connector_alloc();
6172 if (!intel_connector
) {
6173 kfree(intel_dig_port
);
6177 intel_encoder
= &intel_dig_port
->base
;
6178 encoder
= &intel_encoder
->base
;
6180 drm_encoder_init(dev
, &intel_encoder
->base
, &intel_dp_enc_funcs
,
6181 DRM_MODE_ENCODER_TMDS
);
6183 intel_encoder
->compute_config
= intel_dp_compute_config
;
6184 intel_encoder
->disable
= intel_disable_dp
;
6185 intel_encoder
->get_hw_state
= intel_dp_get_hw_state
;
6186 intel_encoder
->get_config
= intel_dp_get_config
;
6187 intel_encoder
->suspend
= intel_dp_encoder_suspend
;
6188 if (IS_CHERRYVIEW(dev
)) {
6189 intel_encoder
->pre_pll_enable
= chv_dp_pre_pll_enable
;
6190 intel_encoder
->pre_enable
= chv_pre_enable_dp
;
6191 intel_encoder
->enable
= vlv_enable_dp
;
6192 intel_encoder
->post_disable
= chv_post_disable_dp
;
6193 intel_encoder
->post_pll_disable
= chv_dp_post_pll_disable
;
6194 } else if (IS_VALLEYVIEW(dev
)) {
6195 intel_encoder
->pre_pll_enable
= vlv_dp_pre_pll_enable
;
6196 intel_encoder
->pre_enable
= vlv_pre_enable_dp
;
6197 intel_encoder
->enable
= vlv_enable_dp
;
6198 intel_encoder
->post_disable
= vlv_post_disable_dp
;
6200 intel_encoder
->pre_enable
= g4x_pre_enable_dp
;
6201 intel_encoder
->enable
= g4x_enable_dp
;
6202 if (INTEL_INFO(dev
)->gen
>= 5)
6203 intel_encoder
->post_disable
= ilk_post_disable_dp
;
6206 intel_dig_port
->port
= port
;
6207 intel_dig_port
->dp
.output_reg
= output_reg
;
6209 intel_encoder
->type
= INTEL_OUTPUT_DISPLAYPORT
;
6210 if (IS_CHERRYVIEW(dev
)) {
6212 intel_encoder
->crtc_mask
= 1 << 2;
6214 intel_encoder
->crtc_mask
= (1 << 0) | (1 << 1);
6216 intel_encoder
->crtc_mask
= (1 << 0) | (1 << 1) | (1 << 2);
6218 intel_encoder
->cloneable
= 0;
6220 intel_dig_port
->hpd_pulse
= intel_dp_hpd_pulse
;
6221 dev_priv
->hotplug
.irq_port
[port
] = intel_dig_port
;
6223 if (!intel_dp_init_connector(intel_dig_port
, intel_connector
)) {
6224 drm_encoder_cleanup(encoder
);
6225 kfree(intel_dig_port
);
6226 kfree(intel_connector
);
6230 void intel_dp_mst_suspend(struct drm_device
*dev
)
6232 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
6236 for (i
= 0; i
< I915_MAX_PORTS
; i
++) {
6237 struct intel_digital_port
*intel_dig_port
= dev_priv
->hotplug
.irq_port
[i
];
6238 if (!intel_dig_port
)
6241 if (intel_dig_port
->base
.type
== INTEL_OUTPUT_DISPLAYPORT
) {
6242 if (!intel_dig_port
->dp
.can_mst
)
6244 if (intel_dig_port
->dp
.is_mst
)
6245 drm_dp_mst_topology_mgr_suspend(&intel_dig_port
->dp
.mst_mgr
);
6250 void intel_dp_mst_resume(struct drm_device
*dev
)
6252 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
6255 for (i
= 0; i
< I915_MAX_PORTS
; i
++) {
6256 struct intel_digital_port
*intel_dig_port
= dev_priv
->hotplug
.irq_port
[i
];
6257 if (!intel_dig_port
)
6259 if (intel_dig_port
->base
.type
== INTEL_OUTPUT_DISPLAYPORT
) {
6262 if (!intel_dig_port
->dp
.can_mst
)
6265 ret
= drm_dp_mst_topology_mgr_resume(&intel_dig_port
->dp
.mst_mgr
);
6267 intel_dp_check_mst_status(&intel_dig_port
->dp
);