2 * Copyright 2008 Intel Corporation <hong.liu@intel.com>
3 * Copyright 2008 Red Hat <mjg@redhat.com>
5 * Permission is hereby granted, free of charge, to any person obtaining
6 * a copy of this software and associated documentation files (the
7 * "Software"), to deal in the Software without restriction, including
8 * without limitation the rights to use, copy, modify, merge, publish,
9 * distribute, sub license, and/or sell copies of the Software, and to
10 * permit persons to whom the Software is furnished to do so, subject to
11 * the following conditions:
13 * The above copyright notice and this permission notice (including the
14 * next paragraph) shall be included in all copies or substantial
15 * portions of the Software.
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
18 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
19 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
20 * NON-INFRINGEMENT. IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
21 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
22 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
23 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
30 #include <linux/acpi.h>
31 #include <linux/acpi_io.h>
32 #include <acpi/video.h>
35 #include <drm/i915_drm.h>
37 #include "intel_drv.h"
41 #define PCI_SWSCI 0xe8
42 #define PCI_SWSCI_SCISEL (1 << 15)
43 #define PCI_SWSCI_GSSCIE (1 << 0)
45 #define OPREGION_HEADER_OFFSET 0
46 #define OPREGION_ACPI_OFFSET 0x100
47 #define ACPI_CLID 0x01ac /* current lid state indicator */
48 #define ACPI_CDCK 0x01b0 /* current docking state indicator */
49 #define OPREGION_SWSCI_OFFSET 0x200
50 #define OPREGION_ASLE_OFFSET 0x300
51 #define OPREGION_VBT_OFFSET 0x400
53 #define OPREGION_SIGNATURE "IntelGraphicsMem"
54 #define MBOX_ACPI (1<<0)
55 #define MBOX_SWSCI (1<<1)
56 #define MBOX_ASLE (1<<2)
58 struct opregion_header
{
67 } __attribute__((packed
));
69 /* OpRegion mailbox #1: public ACPI methods */
70 struct opregion_acpi
{
71 u32 drdy
; /* driver readiness */
72 u32 csts
; /* notification status */
73 u32 cevt
; /* current event */
75 u32 didl
[8]; /* supported display devices ID list */
76 u32 cpdl
[8]; /* currently presented display list */
77 u32 cadl
[8]; /* currently active display list */
78 u32 nadl
[8]; /* next active devices list */
79 u32 aslp
; /* ASL sleep time-out */
80 u32 tidx
; /* toggle table index */
81 u32 chpd
; /* current hotplug enable indicator */
82 u32 clid
; /* current lid state*/
83 u32 cdck
; /* current docking state */
84 u32 sxsw
; /* Sx state resume */
85 u32 evts
; /* ASL supported events */
86 u32 cnot
; /* current OS notification */
87 u32 nrdy
; /* driver status */
89 } __attribute__((packed
));
91 /* OpRegion mailbox #2: SWSCI */
92 struct opregion_swsci
{
93 u32 scic
; /* SWSCI command|status|data */
94 u32 parm
; /* command parameters */
95 u32 dslp
; /* driver sleep time-out */
97 } __attribute__((packed
));
99 /* OpRegion mailbox #3: ASLE */
100 struct opregion_asle
{
101 u32 ardy
; /* driver readiness */
102 u32 aslc
; /* ASLE interrupt command */
103 u32 tche
; /* technology enabled indicator */
104 u32 alsi
; /* current ALS illuminance reading */
105 u32 bclp
; /* backlight brightness to set */
106 u32 pfit
; /* panel fitting state */
107 u32 cblv
; /* current brightness level */
108 u16 bclm
[20]; /* backlight level duty cycle mapping table */
109 u32 cpfm
; /* current panel fitting mode */
110 u32 epfm
; /* enabled panel fitting modes */
111 u8 plut
[74]; /* panel LUT and identifier */
112 u32 pfmb
; /* PWM freq and min brightness */
113 u32 cddv
; /* color correction default values */
114 u32 pcft
; /* power conservation features */
115 u32 srot
; /* supported rotation angles */
116 u32 iuer
; /* IUER events */
118 } __attribute__((packed
));
120 /* Driver readiness indicator */
121 #define ASLE_ARDY_READY (1 << 0)
122 #define ASLE_ARDY_NOT_READY (0 << 0)
124 /* ASLE Interrupt Command (ASLC) bits */
125 #define ASLC_SET_ALS_ILLUM (1 << 0)
126 #define ASLC_SET_BACKLIGHT (1 << 1)
127 #define ASLC_SET_PFIT (1 << 2)
128 #define ASLC_SET_PWM_FREQ (1 << 3)
129 #define ASLC_SUPPORTED_ROTATION_ANGLES (1 << 4)
130 #define ASLC_BUTTON_ARRAY (1 << 5)
131 #define ASLC_CONVERTIBLE_INDICATOR (1 << 6)
132 #define ASLC_DOCKING_INDICATOR (1 << 7)
133 #define ASLC_ISCT_STATE_CHANGE (1 << 8)
134 #define ASLC_REQ_MSK 0x1ff
136 #define ASLC_ALS_ILLUM_FAILED (1 << 10)
137 #define ASLC_BACKLIGHT_FAILED (1 << 12)
138 #define ASLC_PFIT_FAILED (1 << 14)
139 #define ASLC_PWM_FREQ_FAILED (1 << 16)
140 #define ASLC_ROTATION_ANGLES_FAILED (1 << 18)
141 #define ASLC_BUTTON_ARRAY_FAILED (1 << 20)
142 #define ASLC_CONVERTIBLE_FAILED (1 << 22)
143 #define ASLC_DOCKING_FAILED (1 << 24)
144 #define ASLC_ISCT_STATE_FAILED (1 << 26)
146 /* Technology enabled indicator */
147 #define ASLE_TCHE_ALS_EN (1 << 0)
148 #define ASLE_TCHE_BLC_EN (1 << 1)
149 #define ASLE_TCHE_PFIT_EN (1 << 2)
150 #define ASLE_TCHE_PFMB_EN (1 << 3)
152 /* ASLE backlight brightness to set */
153 #define ASLE_BCLP_VALID (1<<31)
154 #define ASLE_BCLP_MSK (~(1<<31))
156 /* ASLE panel fitting request */
157 #define ASLE_PFIT_VALID (1<<31)
158 #define ASLE_PFIT_CENTER (1<<0)
159 #define ASLE_PFIT_STRETCH_TEXT (1<<1)
160 #define ASLE_PFIT_STRETCH_GFX (1<<2)
162 /* PWM frequency and minimum brightness */
163 #define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
164 #define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
165 #define ASLE_PFMB_PWM_MASK (0x7ffffe00)
166 #define ASLE_PFMB_PWM_VALID (1<<31)
168 #define ASLE_CBLV_VALID (1<<31)
171 #define ASLE_IUER_DOCKING (1 << 7)
172 #define ASLE_IUER_CONVERTIBLE (1 << 6)
173 #define ASLE_IUER_ROTATION_LOCK_BTN (1 << 4)
174 #define ASLE_IUER_VOLUME_DOWN_BTN (1 << 3)
175 #define ASLE_IUER_VOLUME_UP_BTN (1 << 2)
176 #define ASLE_IUER_WINDOWS_BTN (1 << 1)
177 #define ASLE_IUER_POWER_BTN (1 << 0)
179 /* Software System Control Interrupt (SWSCI) */
180 #define SWSCI_SCIC_INDICATOR (1 << 0)
181 #define SWSCI_SCIC_MAIN_FUNCTION_SHIFT 1
182 #define SWSCI_SCIC_MAIN_FUNCTION_MASK (0xf << 1)
183 #define SWSCI_SCIC_SUB_FUNCTION_SHIFT 8
184 #define SWSCI_SCIC_SUB_FUNCTION_MASK (0xff << 8)
185 #define SWSCI_SCIC_EXIT_PARAMETER_SHIFT 8
186 #define SWSCI_SCIC_EXIT_PARAMETER_MASK (0xff << 8)
187 #define SWSCI_SCIC_EXIT_STATUS_SHIFT 5
188 #define SWSCI_SCIC_EXIT_STATUS_MASK (7 << 5)
189 #define SWSCI_SCIC_EXIT_STATUS_SUCCESS 1
191 #define SWSCI_FUNCTION_CODE(main, sub) \
192 ((main) << SWSCI_SCIC_MAIN_FUNCTION_SHIFT | \
193 (sub) << SWSCI_SCIC_SUB_FUNCTION_SHIFT)
195 /* SWSCI: Get BIOS Data (GBDA) */
197 #define SWSCI_GBDA_SUPPORTED_CALLS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 0)
198 #define SWSCI_GBDA_REQUESTED_CALLBACKS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 1)
199 #define SWSCI_GBDA_BOOT_DISPLAY_PREF SWSCI_FUNCTION_CODE(SWSCI_GBDA, 4)
200 #define SWSCI_GBDA_PANEL_DETAILS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 5)
201 #define SWSCI_GBDA_TV_STANDARD SWSCI_FUNCTION_CODE(SWSCI_GBDA, 6)
202 #define SWSCI_GBDA_INTERNAL_GRAPHICS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 7)
203 #define SWSCI_GBDA_SPREAD_SPECTRUM SWSCI_FUNCTION_CODE(SWSCI_GBDA, 10)
205 /* SWSCI: System BIOS Callbacks (SBCB) */
207 #define SWSCI_SBCB_SUPPORTED_CALLBACKS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 0)
208 #define SWSCI_SBCB_INIT_COMPLETION SWSCI_FUNCTION_CODE(SWSCI_SBCB, 1)
209 #define SWSCI_SBCB_PRE_HIRES_SET_MODE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 3)
210 #define SWSCI_SBCB_POST_HIRES_SET_MODE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 4)
211 #define SWSCI_SBCB_DISPLAY_SWITCH SWSCI_FUNCTION_CODE(SWSCI_SBCB, 5)
212 #define SWSCI_SBCB_SET_TV_FORMAT SWSCI_FUNCTION_CODE(SWSCI_SBCB, 6)
213 #define SWSCI_SBCB_ADAPTER_POWER_STATE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 7)
214 #define SWSCI_SBCB_DISPLAY_POWER_STATE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 8)
215 #define SWSCI_SBCB_SET_BOOT_DISPLAY SWSCI_FUNCTION_CODE(SWSCI_SBCB, 9)
216 #define SWSCI_SBCB_SET_PANEL_DETAILS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 10)
217 #define SWSCI_SBCB_SET_INTERNAL_GFX SWSCI_FUNCTION_CODE(SWSCI_SBCB, 11)
218 #define SWSCI_SBCB_POST_HIRES_TO_DOS_FS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 16)
219 #define SWSCI_SBCB_SUSPEND_RESUME SWSCI_FUNCTION_CODE(SWSCI_SBCB, 17)
220 #define SWSCI_SBCB_SET_SPREAD_SPECTRUM SWSCI_FUNCTION_CODE(SWSCI_SBCB, 18)
221 #define SWSCI_SBCB_POST_VBE_PM SWSCI_FUNCTION_CODE(SWSCI_SBCB, 19)
222 #define SWSCI_SBCB_ENABLE_DISABLE_AUDIO SWSCI_FUNCTION_CODE(SWSCI_SBCB, 21)
224 #define ACPI_OTHER_OUTPUT (0<<8)
225 #define ACPI_VGA_OUTPUT (1<<8)
226 #define ACPI_TV_OUTPUT (2<<8)
227 #define ACPI_DIGITAL_OUTPUT (3<<8)
228 #define ACPI_LVDS_OUTPUT (4<<8)
231 static int swsci(struct drm_device
*dev
, u32 function
, u32 parm
, u32
*parm_out
)
233 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
234 struct opregion_swsci __iomem
*swsci
= dev_priv
->opregion
.swsci
;
235 u32 main_function
, sub_function
, scic
;
242 main_function
= (function
& SWSCI_SCIC_MAIN_FUNCTION_MASK
) >>
243 SWSCI_SCIC_MAIN_FUNCTION_SHIFT
;
244 sub_function
= (function
& SWSCI_SCIC_SUB_FUNCTION_MASK
) >>
245 SWSCI_SCIC_SUB_FUNCTION_SHIFT
;
247 /* Check if we can call the function. See swsci_setup for details. */
248 if (main_function
== SWSCI_SBCB
) {
249 if ((dev_priv
->opregion
.swsci_sbcb_sub_functions
&
250 (1 << sub_function
)) == 0)
252 } else if (main_function
== SWSCI_GBDA
) {
253 if ((dev_priv
->opregion
.swsci_gbda_sub_functions
&
254 (1 << sub_function
)) == 0)
258 /* Driver sleep timeout in ms. */
259 dslp
= ioread32(&swsci
->dslp
);
261 /* The spec says 2ms should be the default, but it's too small
262 * for some machines. */
264 } else if (dslp
> 500) {
265 /* Hey bios, trust must be earned. */
266 WARN_ONCE(1, "excessive driver sleep timeout (DSPL) %u\n", dslp
);
270 /* The spec tells us to do this, but we are the only user... */
271 scic
= ioread32(&swsci
->scic
);
272 if (scic
& SWSCI_SCIC_INDICATOR
) {
273 DRM_DEBUG_DRIVER("SWSCI request already in progress\n");
277 scic
= function
| SWSCI_SCIC_INDICATOR
;
279 iowrite32(parm
, &swsci
->parm
);
280 iowrite32(scic
, &swsci
->scic
);
282 /* Ensure SCI event is selected and event trigger is cleared. */
283 pci_read_config_word(dev
->pdev
, PCI_SWSCI
, &pci_swsci
);
284 if (!(pci_swsci
& PCI_SWSCI_SCISEL
) || (pci_swsci
& PCI_SWSCI_GSSCIE
)) {
285 pci_swsci
|= PCI_SWSCI_SCISEL
;
286 pci_swsci
&= ~PCI_SWSCI_GSSCIE
;
287 pci_write_config_word(dev
->pdev
, PCI_SWSCI
, pci_swsci
);
290 /* Use event trigger to tell bios to check the mail. */
291 pci_swsci
|= PCI_SWSCI_GSSCIE
;
292 pci_write_config_word(dev
->pdev
, PCI_SWSCI
, pci_swsci
);
294 /* Poll for the result. */
295 #define C (((scic = ioread32(&swsci->scic)) & SWSCI_SCIC_INDICATOR) == 0)
296 if (wait_for(C
, dslp
)) {
297 DRM_DEBUG_DRIVER("SWSCI request timed out\n");
301 scic
= (scic
& SWSCI_SCIC_EXIT_STATUS_MASK
) >>
302 SWSCI_SCIC_EXIT_STATUS_SHIFT
;
304 /* Note: scic == 0 is an error! */
305 if (scic
!= SWSCI_SCIC_EXIT_STATUS_SUCCESS
) {
306 DRM_DEBUG_DRIVER("SWSCI request error %u\n", scic
);
311 *parm_out
= ioread32(&swsci
->parm
);
318 #define DISPLAY_TYPE_CRT 0
319 #define DISPLAY_TYPE_TV 1
320 #define DISPLAY_TYPE_EXTERNAL_FLAT_PANEL 2
321 #define DISPLAY_TYPE_INTERNAL_FLAT_PANEL 3
323 int intel_opregion_notify_encoder(struct intel_encoder
*intel_encoder
,
326 struct drm_device
*dev
= intel_encoder
->base
.dev
;
331 /* don't care about old stuff for now */
335 port
= intel_ddi_get_encoder_port(intel_encoder
);
336 if (port
== PORT_E
) {
346 switch (intel_encoder
->type
) {
347 case INTEL_OUTPUT_ANALOG
:
348 type
= DISPLAY_TYPE_CRT
;
350 case INTEL_OUTPUT_UNKNOWN
:
351 case INTEL_OUTPUT_DISPLAYPORT
:
352 case INTEL_OUTPUT_HDMI
:
353 type
= DISPLAY_TYPE_EXTERNAL_FLAT_PANEL
;
355 case INTEL_OUTPUT_EDP
:
356 type
= DISPLAY_TYPE_INTERNAL_FLAT_PANEL
;
359 WARN_ONCE(1, "unsupported intel_encoder type %d\n",
360 intel_encoder
->type
);
364 parm
|= type
<< (16 + port
* 3);
366 return swsci(dev
, SWSCI_SBCB_DISPLAY_POWER_STATE
, parm
, NULL
);
369 static const struct {
370 pci_power_t pci_power_state
;
372 } power_state_map
[] = {
377 { PCI_D3cold
, 0x04 },
380 int intel_opregion_notify_adapter(struct drm_device
*dev
, pci_power_t state
)
387 for (i
= 0; i
< ARRAY_SIZE(power_state_map
); i
++) {
388 if (state
== power_state_map
[i
].pci_power_state
)
389 return swsci(dev
, SWSCI_SBCB_ADAPTER_POWER_STATE
,
390 power_state_map
[i
].parm
, NULL
);
396 static u32
asle_set_backlight(struct drm_device
*dev
, u32 bclp
)
398 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
399 struct drm_encoder
*encoder
;
400 struct drm_connector
*connector
;
401 struct intel_connector
*intel_connector
= NULL
;
402 struct drm_crtc
*crtc
= dev_priv
->pipe_to_crtc_mapping
[0];
403 struct opregion_asle __iomem
*asle
= dev_priv
->opregion
.asle
;
407 DRM_DEBUG_DRIVER("bclp = 0x%08x\n", bclp
);
409 if (!(bclp
& ASLE_BCLP_VALID
))
410 return ASLC_BACKLIGHT_FAILED
;
412 bclp
&= ASLE_BCLP_MSK
;
414 return ASLC_BACKLIGHT_FAILED
;
416 mutex_lock(&dev
->mode_config
.mutex
);
418 * Could match the OpRegion connector here instead, but we'd also need
419 * to verify the connector could handle a backlight call.
421 list_for_each_entry(encoder
, &dev
->mode_config
.encoder_list
, head
)
422 if (encoder
->crtc
== crtc
) {
428 ret
= ASLC_BACKLIGHT_FAILED
;
432 list_for_each_entry(connector
, &dev
->mode_config
.connector_list
, head
)
433 if (connector
->encoder
== encoder
)
434 intel_connector
= to_intel_connector(connector
);
436 if (!intel_connector
) {
437 ret
= ASLC_BACKLIGHT_FAILED
;
441 DRM_DEBUG_KMS("updating opregion backlight %d/255\n", bclp
);
442 intel_panel_set_backlight(intel_connector
, bclp
, 255);
443 iowrite32(DIV_ROUND_UP(bclp
* 100, 255) | ASLE_CBLV_VALID
, &asle
->cblv
);
446 mutex_unlock(&dev
->mode_config
.mutex
);
451 static u32
asle_set_als_illum(struct drm_device
*dev
, u32 alsi
)
453 /* alsi is the current ALS reading in lux. 0 indicates below sensor
454 range, 0xffff indicates above sensor range. 1-0xfffe are valid */
455 DRM_DEBUG_DRIVER("Illum is not supported\n");
456 return ASLC_ALS_ILLUM_FAILED
;
459 static u32
asle_set_pwm_freq(struct drm_device
*dev
, u32 pfmb
)
461 DRM_DEBUG_DRIVER("PWM freq is not supported\n");
462 return ASLC_PWM_FREQ_FAILED
;
465 static u32
asle_set_pfit(struct drm_device
*dev
, u32 pfit
)
467 /* Panel fitting is currently controlled by the X code, so this is a
468 noop until modesetting support works fully */
469 DRM_DEBUG_DRIVER("Pfit is not supported\n");
470 return ASLC_PFIT_FAILED
;
473 static u32
asle_set_supported_rotation_angles(struct drm_device
*dev
, u32 srot
)
475 DRM_DEBUG_DRIVER("SROT is not supported\n");
476 return ASLC_ROTATION_ANGLES_FAILED
;
479 static u32
asle_set_button_array(struct drm_device
*dev
, u32 iuer
)
482 DRM_DEBUG_DRIVER("Button array event is not supported (nothing)\n");
483 if (iuer
& ASLE_IUER_ROTATION_LOCK_BTN
)
484 DRM_DEBUG_DRIVER("Button array event is not supported (rotation lock)\n");
485 if (iuer
& ASLE_IUER_VOLUME_DOWN_BTN
)
486 DRM_DEBUG_DRIVER("Button array event is not supported (volume down)\n");
487 if (iuer
& ASLE_IUER_VOLUME_UP_BTN
)
488 DRM_DEBUG_DRIVER("Button array event is not supported (volume up)\n");
489 if (iuer
& ASLE_IUER_WINDOWS_BTN
)
490 DRM_DEBUG_DRIVER("Button array event is not supported (windows)\n");
491 if (iuer
& ASLE_IUER_POWER_BTN
)
492 DRM_DEBUG_DRIVER("Button array event is not supported (power)\n");
494 return ASLC_BUTTON_ARRAY_FAILED
;
497 static u32
asle_set_convertible(struct drm_device
*dev
, u32 iuer
)
499 if (iuer
& ASLE_IUER_CONVERTIBLE
)
500 DRM_DEBUG_DRIVER("Convertible is not supported (clamshell)\n");
502 DRM_DEBUG_DRIVER("Convertible is not supported (slate)\n");
504 return ASLC_CONVERTIBLE_FAILED
;
507 static u32
asle_set_docking(struct drm_device
*dev
, u32 iuer
)
509 if (iuer
& ASLE_IUER_DOCKING
)
510 DRM_DEBUG_DRIVER("Docking is not supported (docked)\n");
512 DRM_DEBUG_DRIVER("Docking is not supported (undocked)\n");
514 return ASLC_DOCKING_FAILED
;
517 static u32
asle_isct_state(struct drm_device
*dev
)
519 DRM_DEBUG_DRIVER("ISCT is not supported\n");
520 return ASLC_ISCT_STATE_FAILED
;
523 static void asle_work(struct work_struct
*work
)
525 struct intel_opregion
*opregion
=
526 container_of(work
, struct intel_opregion
, asle_work
);
527 struct drm_i915_private
*dev_priv
=
528 container_of(opregion
, struct drm_i915_private
, opregion
);
529 struct drm_device
*dev
= dev_priv
->dev
;
530 struct opregion_asle __iomem
*asle
= dev_priv
->opregion
.asle
;
537 aslc_req
= ioread32(&asle
->aslc
);
539 if (!(aslc_req
& ASLC_REQ_MSK
)) {
540 DRM_DEBUG_DRIVER("No request on ASLC interrupt 0x%08x\n",
545 if (aslc_req
& ASLC_SET_ALS_ILLUM
)
546 aslc_stat
|= asle_set_als_illum(dev
, ioread32(&asle
->alsi
));
548 if (aslc_req
& ASLC_SET_BACKLIGHT
)
549 aslc_stat
|= asle_set_backlight(dev
, ioread32(&asle
->bclp
));
551 if (aslc_req
& ASLC_SET_PFIT
)
552 aslc_stat
|= asle_set_pfit(dev
, ioread32(&asle
->pfit
));
554 if (aslc_req
& ASLC_SET_PWM_FREQ
)
555 aslc_stat
|= asle_set_pwm_freq(dev
, ioread32(&asle
->pfmb
));
557 if (aslc_req
& ASLC_SUPPORTED_ROTATION_ANGLES
)
558 aslc_stat
|= asle_set_supported_rotation_angles(dev
,
559 ioread32(&asle
->srot
));
561 if (aslc_req
& ASLC_BUTTON_ARRAY
)
562 aslc_stat
|= asle_set_button_array(dev
, ioread32(&asle
->iuer
));
564 if (aslc_req
& ASLC_CONVERTIBLE_INDICATOR
)
565 aslc_stat
|= asle_set_convertible(dev
, ioread32(&asle
->iuer
));
567 if (aslc_req
& ASLC_DOCKING_INDICATOR
)
568 aslc_stat
|= asle_set_docking(dev
, ioread32(&asle
->iuer
));
570 if (aslc_req
& ASLC_ISCT_STATE_CHANGE
)
571 aslc_stat
|= asle_isct_state(dev
);
573 iowrite32(aslc_stat
, &asle
->aslc
);
576 void intel_opregion_asle_intr(struct drm_device
*dev
)
578 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
580 if (dev_priv
->opregion
.asle
)
581 schedule_work(&dev_priv
->opregion
.asle_work
);
584 #define ACPI_EV_DISPLAY_SWITCH (1<<0)
585 #define ACPI_EV_LID (1<<1)
586 #define ACPI_EV_DOCK (1<<2)
588 static struct intel_opregion
*system_opregion
;
590 static int intel_opregion_video_event(struct notifier_block
*nb
,
591 unsigned long val
, void *data
)
593 /* The only video events relevant to opregion are 0x80. These indicate
594 either a docking event, lid switch or display switch request. In
595 Linux, these are handled by the dock, button and video drivers.
598 struct opregion_acpi __iomem
*acpi
;
599 struct acpi_bus_event
*event
= data
;
602 if (strcmp(event
->device_class
, ACPI_VIDEO_CLASS
) != 0)
605 if (!system_opregion
)
608 acpi
= system_opregion
->acpi
;
610 if (event
->type
== 0x80 &&
611 (ioread32(&acpi
->cevt
) & 1) == 0)
614 iowrite32(0, &acpi
->csts
);
619 static struct notifier_block intel_opregion_notifier
= {
620 .notifier_call
= intel_opregion_video_event
,
624 * Initialise the DIDL field in opregion. This passes a list of devices to
625 * the firmware. Values are defined by section B.4.2 of the ACPI specification
629 static void intel_didl_outputs(struct drm_device
*dev
)
631 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
632 struct intel_opregion
*opregion
= &dev_priv
->opregion
;
633 struct drm_connector
*connector
;
635 struct acpi_device
*acpi_dev
, *acpi_cdev
, *acpi_video_bus
= NULL
;
636 unsigned long long device_id
;
641 handle
= ACPI_HANDLE(&dev
->pdev
->dev
);
642 if (!handle
|| acpi_bus_get_device(handle
, &acpi_dev
))
645 if (acpi_is_video_device(handle
))
646 acpi_video_bus
= acpi_dev
;
648 list_for_each_entry(acpi_cdev
, &acpi_dev
->children
, node
) {
649 if (acpi_is_video_device(acpi_cdev
->handle
)) {
650 acpi_video_bus
= acpi_cdev
;
656 if (!acpi_video_bus
) {
657 pr_warn("No ACPI video bus found\n");
661 list_for_each_entry(acpi_cdev
, &acpi_video_bus
->children
, node
) {
663 dev_dbg(&dev
->pdev
->dev
,
664 "More than 8 outputs detected via ACPI\n");
668 acpi_evaluate_integer(acpi_cdev
->handle
, "_ADR",
670 if (ACPI_SUCCESS(status
)) {
673 iowrite32((u32
)(device_id
& 0x0f0f),
674 &opregion
->acpi
->didl
[i
]);
680 /* If fewer than 8 outputs, the list must be null terminated */
682 iowrite32(0, &opregion
->acpi
->didl
[i
]);
687 list_for_each_entry(connector
, &dev
->mode_config
.connector_list
, head
) {
688 int output_type
= ACPI_OTHER_OUTPUT
;
690 dev_dbg(&dev
->pdev
->dev
,
691 "More than 8 outputs in connector list\n");
694 switch (connector
->connector_type
) {
695 case DRM_MODE_CONNECTOR_VGA
:
696 case DRM_MODE_CONNECTOR_DVIA
:
697 output_type
= ACPI_VGA_OUTPUT
;
699 case DRM_MODE_CONNECTOR_Composite
:
700 case DRM_MODE_CONNECTOR_SVIDEO
:
701 case DRM_MODE_CONNECTOR_Component
:
702 case DRM_MODE_CONNECTOR_9PinDIN
:
703 output_type
= ACPI_TV_OUTPUT
;
705 case DRM_MODE_CONNECTOR_DVII
:
706 case DRM_MODE_CONNECTOR_DVID
:
707 case DRM_MODE_CONNECTOR_DisplayPort
:
708 case DRM_MODE_CONNECTOR_HDMIA
:
709 case DRM_MODE_CONNECTOR_HDMIB
:
710 output_type
= ACPI_DIGITAL_OUTPUT
;
712 case DRM_MODE_CONNECTOR_LVDS
:
713 output_type
= ACPI_LVDS_OUTPUT
;
716 temp
= ioread32(&opregion
->acpi
->didl
[i
]);
717 iowrite32(temp
| (1<<31) | output_type
| i
,
718 &opregion
->acpi
->didl
[i
]);
724 static void intel_setup_cadls(struct drm_device
*dev
)
726 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
727 struct intel_opregion
*opregion
= &dev_priv
->opregion
;
731 /* Initialize the CADL field by duplicating the DIDL values.
732 * Technically, this is not always correct as display outputs may exist,
733 * but not active. This initialization is necessary for some Clevo
734 * laptops that check this field before processing the brightness and
735 * display switching hotkeys. Just like DIDL, CADL is NULL-terminated if
736 * there are less than eight devices. */
738 disp_id
= ioread32(&opregion
->acpi
->didl
[i
]);
739 iowrite32(disp_id
, &opregion
->acpi
->cadl
[i
]);
740 } while (++i
< 8 && disp_id
!= 0);
743 void intel_opregion_init(struct drm_device
*dev
)
745 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
746 struct intel_opregion
*opregion
= &dev_priv
->opregion
;
748 if (!opregion
->header
)
751 if (opregion
->acpi
) {
752 if (drm_core_check_feature(dev
, DRIVER_MODESET
)) {
753 intel_didl_outputs(dev
);
754 intel_setup_cadls(dev
);
757 /* Notify BIOS we are ready to handle ACPI video ext notifs.
758 * Right now, all the events are handled by the ACPI video module.
759 * We don't actually need to do anything with them. */
760 iowrite32(0, &opregion
->acpi
->csts
);
761 iowrite32(1, &opregion
->acpi
->drdy
);
763 system_opregion
= opregion
;
764 register_acpi_notifier(&intel_opregion_notifier
);
767 if (opregion
->asle
) {
768 iowrite32(ASLE_TCHE_BLC_EN
, &opregion
->asle
->tche
);
769 iowrite32(ASLE_ARDY_READY
, &opregion
->asle
->ardy
);
773 void intel_opregion_fini(struct drm_device
*dev
)
775 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
776 struct intel_opregion
*opregion
= &dev_priv
->opregion
;
778 if (!opregion
->header
)
782 iowrite32(ASLE_ARDY_NOT_READY
, &opregion
->asle
->ardy
);
784 cancel_work_sync(&dev_priv
->opregion
.asle_work
);
786 if (opregion
->acpi
) {
787 iowrite32(0, &opregion
->acpi
->drdy
);
789 system_opregion
= NULL
;
790 unregister_acpi_notifier(&intel_opregion_notifier
);
793 /* just clear all opregion memory pointers now */
794 iounmap(opregion
->header
);
795 opregion
->header
= NULL
;
796 opregion
->acpi
= NULL
;
797 opregion
->swsci
= NULL
;
798 opregion
->asle
= NULL
;
799 opregion
->vbt
= NULL
;
800 opregion
->lid_state
= NULL
;
803 static void swsci_setup(struct drm_device
*dev
)
805 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
806 struct intel_opregion
*opregion
= &dev_priv
->opregion
;
807 bool requested_callbacks
= false;
810 /* Sub-function code 0 is okay, let's allow them. */
811 opregion
->swsci_gbda_sub_functions
= 1;
812 opregion
->swsci_sbcb_sub_functions
= 1;
814 /* We use GBDA to ask for supported GBDA calls. */
815 if (swsci(dev
, SWSCI_GBDA_SUPPORTED_CALLS
, 0, &tmp
) == 0) {
816 /* make the bits match the sub-function codes */
818 opregion
->swsci_gbda_sub_functions
|= tmp
;
822 * We also use GBDA to ask for _requested_ SBCB callbacks. The driver
823 * must not call interfaces that are not specifically requested by the
826 if (swsci(dev
, SWSCI_GBDA_REQUESTED_CALLBACKS
, 0, &tmp
) == 0) {
827 /* here, the bits already match sub-function codes */
828 opregion
->swsci_sbcb_sub_functions
|= tmp
;
829 requested_callbacks
= true;
833 * But we use SBCB to ask for _supported_ SBCB calls. This does not mean
834 * the callback is _requested_. But we still can't call interfaces that
837 if (swsci(dev
, SWSCI_SBCB_SUPPORTED_CALLBACKS
, 0, &tmp
) == 0) {
838 /* make the bits match the sub-function codes */
839 u32 low
= tmp
& 0x7ff;
840 u32 high
= tmp
& ~0xfff; /* bit 11 is reserved */
841 tmp
= (high
<< 4) | (low
<< 1) | 1;
843 /* best guess what to do with supported wrt requested */
844 if (requested_callbacks
) {
845 u32 req
= opregion
->swsci_sbcb_sub_functions
;
846 if ((req
& tmp
) != req
)
847 DRM_DEBUG_DRIVER("SWSCI BIOS requested (%08x) SBCB callbacks that are not supported (%08x)\n", req
, tmp
);
848 /* XXX: for now, trust the requested callbacks */
849 /* opregion->swsci_sbcb_sub_functions &= tmp; */
851 opregion
->swsci_sbcb_sub_functions
|= tmp
;
855 DRM_DEBUG_DRIVER("SWSCI GBDA callbacks %08x, SBCB callbacks %08x\n",
856 opregion
->swsci_gbda_sub_functions
,
857 opregion
->swsci_sbcb_sub_functions
);
859 #else /* CONFIG_ACPI */
860 static inline void swsci_setup(struct drm_device
*dev
) {}
861 #endif /* CONFIG_ACPI */
863 int intel_opregion_setup(struct drm_device
*dev
)
865 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
866 struct intel_opregion
*opregion
= &dev_priv
->opregion
;
869 char buf
[sizeof(OPREGION_SIGNATURE
)];
872 pci_read_config_dword(dev
->pdev
, PCI_ASLS
, &asls
);
873 DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls
);
875 DRM_DEBUG_DRIVER("ACPI OpRegion not supported!\n");
880 INIT_WORK(&opregion
->asle_work
, asle_work
);
883 base
= acpi_os_ioremap(asls
, OPREGION_SIZE
);
887 memcpy_fromio(buf
, base
, sizeof(buf
));
889 if (memcmp(buf
, OPREGION_SIGNATURE
, 16)) {
890 DRM_DEBUG_DRIVER("opregion signature mismatch\n");
894 opregion
->header
= base
;
895 opregion
->vbt
= base
+ OPREGION_VBT_OFFSET
;
897 opregion
->lid_state
= base
+ ACPI_CLID
;
899 mboxes
= ioread32(&opregion
->header
->mboxes
);
900 if (mboxes
& MBOX_ACPI
) {
901 DRM_DEBUG_DRIVER("Public ACPI methods supported\n");
902 opregion
->acpi
= base
+ OPREGION_ACPI_OFFSET
;
905 if (mboxes
& MBOX_SWSCI
) {
906 DRM_DEBUG_DRIVER("SWSCI supported\n");
907 opregion
->swsci
= base
+ OPREGION_SWSCI_OFFSET
;
910 if (mboxes
& MBOX_ASLE
) {
911 DRM_DEBUG_DRIVER("ASLE supported\n");
912 opregion
->asle
= base
+ OPREGION_ASLE_OFFSET
;
914 iowrite32(ASLE_ARDY_NOT_READY
, &opregion
->asle
->ardy
);