drivers/gpu/drm/msm/dsi/phy/dsi_phy.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
   4  */
   5
   6 #include <linux/platform_device.h>
   7
   8 #include "dsi_phy.h"
   9
  10 #define S_DIV_ROUND_UP(n, d)    \
  11         (((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
  12
  13 static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
  14                                 s32 min_result, bool even)
  15 {
  16         s32 v;
  17
  18         v = (tmax - tmin) * percent;
  19         v = S_DIV_ROUND_UP(v, 100) + tmin;
  20         if (even && (v & 0x1))
  21                 return max_t(s32, min_result, v - 1);
  22         else
  23                 return max_t(s32, min_result, v);
  24 }
  25
  26 static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing,
  27                                         s32 ui, s32 coeff, s32 pcnt)
  28 {
  29         s32 tmax, tmin, clk_z;
  30         s32 temp;
  31
  32         /* reset */
  33         temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
  34         tmin = S_DIV_ROUND_UP(temp, ui) - 2;
  35         if (tmin > 255) {
  36                 tmax = 511;
  37                 clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
  38         } else {
  39                 tmax = 255;
  40                 clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
  41         }
  42
  43         /* adjust */
  44         temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
  45         timing->clk_zero = clk_z + 8 - temp;
  46 }
  47
  48 int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
  49                              struct msm_dsi_phy_clk_request *clk_req)
  50 {
  51         const unsigned long bit_rate = clk_req->bitclk_rate;
  52         const unsigned long esc_rate = clk_req->escclk_rate;
  53         s32 ui, lpx;
  54         s32 tmax, tmin;
  55         s32 pcnt0 = 10;
  56         s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
  57         s32 pcnt2 = 10;
  58         s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
  59         s32 coeff = 1000; /* Precision, should avoid overflow */
  60         s32 temp;
  61
  62         if (!bit_rate || !esc_rate)
  63                 return -EINVAL;
  64
  65         ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
  66         lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
  67
  68         tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
  69         tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
  70         timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
  71
  72         temp = lpx / ui;
  73         if (temp & 0x1)
  74                 timing->hs_rqst = temp;
  75         else
  76                 timing->hs_rqst = max_t(s32, 0, temp - 2);
  77
  78         /* Calculate clk_zero after clk_prepare and hs_rqst */
  79         dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
  80
  81         temp = 105 * coeff + 12 * ui - 20 * coeff;
  82         tmax = S_DIV_ROUND_UP(temp, ui) - 2;
  83         tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
  84         timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
  85
  86         temp = 85 * coeff + 6 * ui;
  87         tmax = S_DIV_ROUND_UP(temp, ui) - 2;
  88         temp = 40 * coeff + 4 * ui;
  89         tmin = S_DIV_ROUND_UP(temp, ui) - 2;
  90         timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
  91
  92         tmax = 255;
  93         temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
  94         temp = 145 * coeff + 10 * ui - temp;
  95         tmin = S_DIV_ROUND_UP(temp, ui) - 2;
  96         timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
  97
  98         temp = 105 * coeff + 12 * ui - 20 * coeff;
  99         tmax = S_DIV_ROUND_UP(temp, ui) - 2;
 100         temp = 60 * coeff + 4 * ui;
 101         tmin = DIV_ROUND_UP(temp, ui) - 2;
 102         timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
 103
 104         tmax = 255;
 105         tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
 106         timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
 107
 108         tmax = 63;
 109         temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
 110         temp = 60 * coeff + 52 * ui - 24 * ui - temp;
 111         tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
 112         timing->shared_timings.clk_post = linear_inter(tmax, tmin, pcnt2, 0,
 113                                                        false);
 114         tmax = 63;
 115         temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
 116         temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
 117         temp += 8 * ui + lpx;
 118         tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
 119         if (tmin > tmax) {
 120                 temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false);
 121                 timing->shared_timings.clk_pre = temp >> 1;
 122                 timing->shared_timings.clk_pre_inc_by_2 = true;
 123         } else {
 124                 timing->shared_timings.clk_pre =
 125                                 linear_inter(tmax, tmin, pcnt2, 0, false);
 126                 timing->shared_timings.clk_pre_inc_by_2 = false;
 127         }
 128
 129         timing->ta_go = 3;
 130         timing->ta_sure = 0;
 131         timing->ta_get = 4;
 132
 133         DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
 134                 timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
 135                 timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
 136                 timing->clk_trail, timing->clk_prepare, timing->hs_exit,
 137                 timing->hs_zero, timing->hs_prepare, timing->hs_trail,
 138                 timing->hs_rqst);
 139
 140         return 0;
 141 }
 142
 143 int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
 144                                 struct msm_dsi_phy_clk_request *clk_req)
 145 {
 146         const unsigned long bit_rate = clk_req->bitclk_rate;
 147         const unsigned long esc_rate = clk_req->escclk_rate;
 148         s32 ui, ui_x8, lpx;
 149         s32 tmax, tmin;
 150         s32 pcnt0 = 50;
 151         s32 pcnt1 = 50;
 152         s32 pcnt2 = 10;
 153         s32 pcnt3 = 30;
 154         s32 pcnt4 = 10;
 155         s32 pcnt5 = 2;
 156         s32 coeff = 1000; /* Precision, should avoid overflow */
 157         s32 hb_en, hb_en_ckln, pd_ckln, pd;
 158         s32 val, val_ckln;
 159         s32 temp;
 160
 161         if (!bit_rate || !esc_rate)
 162                 return -EINVAL;
 163
 164         timing->hs_halfbyte_en = 0;
 165         hb_en = 0;
 166         timing->hs_halfbyte_en_ckln = 0;
 167         hb_en_ckln = 0;
 168         timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3;
 169         pd_ckln = timing->hs_prep_dly_ckln;
 170         timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1;
 171         pd = timing->hs_prep_dly;
 172
 173         val = (hb_en << 2) + (pd << 1);
 174         val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1);
 175
 176         ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
 177         ui_x8 = ui << 3;
 178         lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
 179
 180         temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8);
 181         tmin = max_t(s32, temp, 0);
 182         temp = (95 * coeff - val_ckln * ui) / ui_x8;
 183         tmax = max_t(s32, temp, 0);
 184         timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
 185
 186         temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui;
 187         tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
 188         tmax = (tmin > 255) ? 511 : 255;
 189         timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
 190
 191         tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
 192         temp = 105 * coeff + 12 * ui - 20 * coeff;
 193         tmax = (temp + 3 * ui) / ui_x8;
 194         timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
 195
 196         temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8);
 197         tmin = max_t(s32, temp, 0);
 198         temp = (85 * coeff + 6 * ui - val * ui) / ui_x8;
 199         tmax = max_t(s32, temp, 0);
 200         timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
 201
 202         temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui;
 203         tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
 204         tmax = 255;
 205         timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
 206
 207         tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8);
 208         temp = 105 * coeff + 12 * ui - 20 * coeff;
 209         tmax = (temp + 3 * ui) / ui_x8;
 210         timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
 211
 212         temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
 213         timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
 214
 215         tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
 216         tmax = 255;
 217         timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
 218
 219         temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
 220         timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
 221
 222         temp = 60 * coeff + 52 * ui - 43 * ui;
 223         tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
 224         tmax = 63;
 225         timing->shared_timings.clk_post =
 226                                 linear_inter(tmax, tmin, pcnt2, 0, false);
 227
 228         temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui;
 229         temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui;
 230         temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
 231                                 (((timing->hs_rqst_ckln << 3) + 8) * ui);
 232         tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
 233         tmax = 63;
 234         if (tmin > tmax) {
 235                 temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
 236                 timing->shared_timings.clk_pre = temp >> 1;
 237                 timing->shared_timings.clk_pre_inc_by_2 = 1;
 238         } else {
 239                 timing->shared_timings.clk_pre =
 240                                 linear_inter(tmax, tmin, pcnt2, 0, false);
 241                 timing->shared_timings.clk_pre_inc_by_2 = 0;
 242         }
 243
 244         timing->ta_go = 3;
 245         timing->ta_sure = 0;
 246         timing->ta_get = 4;
 247
 248         DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
 249             timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
 250             timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
 251             timing->clk_trail, timing->clk_prepare, timing->hs_exit,
 252             timing->hs_zero, timing->hs_prepare, timing->hs_trail,
 253             timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
 254             timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
 255             timing->hs_prep_dly_ckln);
 256
 257         return 0;
 258 }
 259
 260 int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
 261         struct msm_dsi_phy_clk_request *clk_req)
 262 {
 263         const unsigned long bit_rate = clk_req->bitclk_rate;
 264         const unsigned long esc_rate = clk_req->escclk_rate;
 265         s32 ui, ui_x8, lpx;
 266         s32 tmax, tmin;
 267         s32 pcnt0 = 50;
 268         s32 pcnt1 = 50;
 269         s32 pcnt2 = 10;
 270         s32 pcnt3 = 30;
 271         s32 pcnt4 = 10;
 272         s32 pcnt5 = 2;
 273         s32 coeff = 1000; /* Precision, should avoid overflow */
 274         s32 hb_en, hb_en_ckln;
 275         s32 temp;
 276
 277         if (!bit_rate || !esc_rate)
 278                 return -EINVAL;
 279
 280         timing->hs_halfbyte_en = 0;
 281         hb_en = 0;
 282         timing->hs_halfbyte_en_ckln = 0;
 283         hb_en_ckln = 0;
 284
 285         ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
 286         ui_x8 = ui << 3;
 287         lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
 288
 289         temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
 290         tmin = max_t(s32, temp, 0);
 291         temp = (95 * coeff) / ui_x8;
 292         tmax = max_t(s32, temp, 0);
 293         timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
 294
 295         temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
 296         tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
 297         tmax = (tmin > 255) ? 511 : 255;
 298         timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
 299
 300         tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
 301         temp = 105 * coeff + 12 * ui - 20 * coeff;
 302         tmax = (temp + 3 * ui) / ui_x8;
 303         timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
 304
 305         temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
 306         tmin = max_t(s32, temp, 0);
 307         temp = (85 * coeff + 6 * ui) / ui_x8;
 308         tmax = max_t(s32, temp, 0);
 309         timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
 310
 311         temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
 312         tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
 313         tmax = 255;
 314         timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
 315
 316         tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
 317         temp = 105 * coeff + 12 * ui - 20 * coeff;
 318         tmax = (temp / ui_x8) - 1;
 319         timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
 320
 321         temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
 322         timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
 323
 324         tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
 325         tmax = 255;
 326         timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
 327
 328         temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
 329         timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
 330
 331         temp = 60 * coeff + 52 * ui - 43 * ui;
 332         tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
 333         tmax = 63;
 334         timing->shared_timings.clk_post =
 335                 linear_inter(tmax, tmin, pcnt2, 0, false);
 336
 337         temp = 8 * ui + (timing->clk_prepare << 3) * ui;
 338         temp += (((timing->clk_zero + 3) << 3) + 11) * ui;
 339         temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
 340                 (((timing->hs_rqst_ckln << 3) + 8) * ui);
 341         tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
 342         tmax = 63;
 343         if (tmin > tmax) {
 344                 temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
 345                 timing->shared_timings.clk_pre = temp >> 1;
 346                 timing->shared_timings.clk_pre_inc_by_2 = 1;
 347         } else {
 348                 timing->shared_timings.clk_pre =
 349                         linear_inter(tmax, tmin, pcnt2, 0, false);
 350                         timing->shared_timings.clk_pre_inc_by_2 = 0;
 351         }
 352
 353         timing->ta_go = 3;
 354         timing->ta_sure = 0;
 355         timing->ta_get = 4;
 356
 357         DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
 358                 timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
 359                 timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
 360                 timing->clk_trail, timing->clk_prepare, timing->hs_exit,
 361                 timing->hs_zero, timing->hs_prepare, timing->hs_trail,
 362                 timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
 363                 timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
 364                 timing->hs_prep_dly_ckln);
 365
 366         return 0;
 367 }
 368
 369 void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
 370                                 u32 bit_mask)
 371 {
 372         int phy_id = phy->id;
 373         u32 val;
 374
 375         if ((phy_id >= DSI_MAX) || (pll_id >= DSI_MAX))
 376                 return;
 377
 378         val = dsi_phy_read(phy->base + reg);
 379
 380         if (phy->cfg->src_pll_truthtable[phy_id][pll_id])
 381                 dsi_phy_write(phy->base + reg, val | bit_mask);
 382         else
 383                 dsi_phy_write(phy->base + reg, val & (~bit_mask));
 384 }
 385
 386 static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
 387 {
 388         struct regulator_bulk_data *s = phy->supplies;
 389         const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
 390         struct device *dev = &phy->pdev->dev;
 391         int num = phy->cfg->reg_cfg.num;
 392         int i, ret;
 393
 394         for (i = 0; i < num; i++)
 395                 s[i].supply = regs[i].name;
 396
 397         ret = devm_regulator_bulk_get(dev, num, s);
 398         if (ret < 0) {
 399                 DRM_DEV_ERROR(dev, "%s: failed to init regulator, ret=%d\n",
 400                                                 __func__, ret);
 401                 return ret;
 402         }
 403
 404         return 0;
 405 }
 406
 407 static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
 408 {
 409         struct regulator_bulk_data *s = phy->supplies;
 410         const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
 411         int num = phy->cfg->reg_cfg.num;
 412         int i;
 413
 414         DBG("");
 415         for (i = num - 1; i >= 0; i--)
 416                 if (regs[i].disable_load >= 0)
 417                         regulator_set_load(s[i].consumer, regs[i].disable_load);
 418
 419         regulator_bulk_disable(num, s);
 420 }
 421
 422 static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
 423 {
 424         struct regulator_bulk_data *s = phy->supplies;
 425         const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
 426         struct device *dev = &phy->pdev->dev;
 427         int num = phy->cfg->reg_cfg.num;
 428         int ret, i;
 429
 430         DBG("");
 431         for (i = 0; i < num; i++) {
 432                 if (regs[i].enable_load >= 0) {
 433                         ret = regulator_set_load(s[i].consumer,
 434                                                         regs[i].enable_load);
 435                         if (ret < 0) {
 436                                 DRM_DEV_ERROR(dev,
 437                                         "regulator %d set op mode failed, %d\n",
 438                                         i, ret);
 439                                 goto fail;
 440                         }
 441                 }
 442         }
 443
 444         ret = regulator_bulk_enable(num, s);
 445         if (ret < 0) {
 446                 DRM_DEV_ERROR(dev, "regulator enable failed, %d\n", ret);
 447                 goto fail;
 448         }
 449
 450         return 0;
 451
 452 fail:
 453         for (i--; i >= 0; i--)
 454                 regulator_set_load(s[i].consumer, regs[i].disable_load);
 455         return ret;
 456 }
 457
 458 static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
 459 {
 460         struct device *dev = &phy->pdev->dev;
 461         int ret;
 462
 463         pm_runtime_get_sync(dev);
 464
 465         ret = clk_prepare_enable(phy->ahb_clk);
 466         if (ret) {
 467                 DRM_DEV_ERROR(dev, "%s: can't enable ahb clk, %d\n", __func__, ret);
 468                 pm_runtime_put_sync(dev);
 469         }
 470
 471         return ret;
 472 }
 473
 474 static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
 475 {
 476         clk_disable_unprepare(phy->ahb_clk);
 477         pm_runtime_put_autosuspend(&phy->pdev->dev);
 478 }
 479
 480 static const struct of_device_id dsi_phy_dt_match[] = {
 481 #ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
 482         { .compatible = "qcom,dsi-phy-28nm-hpm",
 483           .data = &dsi_phy_28nm_hpm_cfgs },
 484         { .compatible = "qcom,dsi-phy-28nm-lp",
 485           .data = &dsi_phy_28nm_lp_cfgs },
 486 #endif
 487 #ifdef CONFIG_DRM_MSM_DSI_20NM_PHY
 488         { .compatible = "qcom,dsi-phy-20nm",
 489           .data = &dsi_phy_20nm_cfgs },
 490 #endif
 491 #ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
 492         { .compatible = "qcom,dsi-phy-28nm-8960",
 493           .data = &dsi_phy_28nm_8960_cfgs },
 494 #endif
 495 #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
 496         { .compatible = "qcom,dsi-phy-14nm",
 497           .data = &dsi_phy_14nm_cfgs },
 498 #endif
 499 #ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
 500         { .compatible = "qcom,dsi-phy-10nm",
 501           .data = &dsi_phy_10nm_cfgs },
 502 #endif
 503         {}
 504 };
 505
 506 /*
 507  * Currently, we only support one SoC for each PHY type. When we have multiple
 508  * SoCs for the same PHY, we can try to make the index searching a bit more
 509  * clever.
 510  */
 511 static int dsi_phy_get_id(struct msm_dsi_phy *phy)
 512 {
 513         struct platform_device *pdev = phy->pdev;
 514         const struct msm_dsi_phy_cfg *cfg = phy->cfg;
 515         struct resource *res;
 516         int i;
 517
 518         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy");
 519         if (!res)
 520                 return -EINVAL;
 521
 522         for (i = 0; i < cfg->num_dsi_phy; i++) {
 523                 if (cfg->io_start[i] == res->start)
 524                         return i;
 525         }
 526
 527         return -EINVAL;
 528 }
 529
 530 int msm_dsi_phy_init_common(struct msm_dsi_phy *phy)
 531 {
 532         struct platform_device *pdev = phy->pdev;
 533         int ret = 0;
 534
 535         phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator",
 536                                 "DSI_PHY_REG");
 537         if (IS_ERR(phy->reg_base)) {
 538                 DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy regulator base\n",
 539                         __func__);
 540                 ret = -ENOMEM;
 541                 goto fail;
 542         }
 543
 544 fail:
 545         return ret;
 546 }
 547
 548 static int dsi_phy_driver_probe(struct platform_device *pdev)
 549 {
 550         struct msm_dsi_phy *phy;
 551         struct device *dev = &pdev->dev;
 552         const struct of_device_id *match;
 553         int ret;
 554
 555         phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 556         if (!phy)
 557                 return -ENOMEM;
 558
 559         match = of_match_node(dsi_phy_dt_match, dev->of_node);
 560         if (!match)
 561                 return -ENODEV;
 562
 563         phy->cfg = match->data;
 564         phy->pdev = pdev;
 565
 566         phy->id = dsi_phy_get_id(phy);
 567         if (phy->id < 0) {
 568                 ret = phy->id;
 569                 DRM_DEV_ERROR(dev, "%s: couldn't identify PHY index, %d\n",
 570                         __func__, ret);
 571                 goto fail;
 572         }
 573
 574         phy->regulator_ldo_mode = of_property_read_bool(dev->of_node,
 575                                 "qcom,dsi-phy-regulator-ldo-mode");
 576
 577         phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
 578         if (IS_ERR(phy->base)) {
 579                 DRM_DEV_ERROR(dev, "%s: failed to map phy base\n", __func__);
 580                 ret = -ENOMEM;
 581                 goto fail;
 582         }
 583
 584         ret = dsi_phy_regulator_init(phy);
 585         if (ret) {
 586                 DRM_DEV_ERROR(dev, "%s: failed to init regulator\n", __func__);
 587                 goto fail;
 588         }
 589
 590         phy->ahb_clk = msm_clk_get(pdev, "iface");
 591         if (IS_ERR(phy->ahb_clk)) {
 592                 DRM_DEV_ERROR(dev, "%s: Unable to get ahb clk\n", __func__);
 593                 ret = PTR_ERR(phy->ahb_clk);
 594                 goto fail;
 595         }
 596
 597         if (phy->cfg->ops.init) {
 598                 ret = phy->cfg->ops.init(phy);
 599                 if (ret)
 600                         goto fail;
 601         }
 602
 603         /* PLL init will call into clk_register which requires
 604          * register access, so we need to enable power and ahb clock.
 605          */
 606         ret = dsi_phy_enable_resource(phy);
 607         if (ret)
 608                 goto fail;
 609
 610         phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id);
 611         if (IS_ERR_OR_NULL(phy->pll))
 612                 DRM_DEV_INFO(dev,
 613                         "%s: pll init failed: %ld, need separate pll clk driver\n",
 614                         __func__, PTR_ERR(phy->pll));
 615
 616         dsi_phy_disable_resource(phy);
 617
 618         platform_set_drvdata(pdev, phy);
 619
 620         return 0;
 621
 622 fail:
 623         return ret;
 624 }
 625
 626 static int dsi_phy_driver_remove(struct platform_device *pdev)
 627 {
 628         struct msm_dsi_phy *phy = platform_get_drvdata(pdev);
 629
 630         if (phy && phy->pll) {
 631                 msm_dsi_pll_destroy(phy->pll);
 632                 phy->pll = NULL;
 633         }
 634
 635         platform_set_drvdata(pdev, NULL);
 636
 637         return 0;
 638 }
 639
 640 static struct platform_driver dsi_phy_platform_driver = {
 641         .probe      = dsi_phy_driver_probe,
 642         .remove     = dsi_phy_driver_remove,
 643         .driver     = {
 644                 .name   = "msm_dsi_phy",
 645                 .of_match_table = dsi_phy_dt_match,
 646         },
 647 };
 648
 649 void __init msm_dsi_phy_driver_register(void)
 650 {
 651         platform_driver_register(&dsi_phy_platform_driver);
 652 }
 653
 654 void __exit msm_dsi_phy_driver_unregister(void)
 655 {
 656         platform_driver_unregister(&dsi_phy_platform_driver);
 657 }
 658
 659 int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
 660                         struct msm_dsi_phy_clk_request *clk_req)
 661 {
 662         struct device *dev = &phy->pdev->dev;
 663         int ret;
 664
 665         if (!phy || !phy->cfg->ops.enable)
 666                 return -EINVAL;
 667
 668         ret = dsi_phy_enable_resource(phy);
 669         if (ret) {
 670                 DRM_DEV_ERROR(dev, "%s: resource enable failed, %d\n",
 671                         __func__, ret);
 672                 goto res_en_fail;
 673         }
 674
 675         ret = dsi_phy_regulator_enable(phy);
 676         if (ret) {
 677                 DRM_DEV_ERROR(dev, "%s: regulator enable failed, %d\n",
 678                         __func__, ret);
 679                 goto reg_en_fail;
 680         }
 681
 682         ret = phy->cfg->ops.enable(phy, src_pll_id, clk_req);
 683         if (ret) {
 684                 DRM_DEV_ERROR(dev, "%s: phy enable failed, %d\n", __func__, ret);
 685                 goto phy_en_fail;
 686         }
 687
 688         /*
 689          * Resetting DSI PHY silently changes its PLL registers to reset status,
 690          * which will confuse clock driver and result in wrong output rate of
 691          * link clocks. Restore PLL status if its PLL is being used as clock
 692          * source.
 693          */
 694         if (phy->usecase != MSM_DSI_PHY_SLAVE) {
 695                 ret = msm_dsi_pll_restore_state(phy->pll);
 696                 if (ret) {
 697                         DRM_DEV_ERROR(dev, "%s: failed to restore pll state, %d\n",
 698                                 __func__, ret);
 699                         goto pll_restor_fail;
 700                 }
 701         }
 702
 703         return 0;
 704
 705 pll_restor_fail:
 706         if (phy->cfg->ops.disable)
 707                 phy->cfg->ops.disable(phy);
 708 phy_en_fail:
 709         dsi_phy_regulator_disable(phy);
 710 reg_en_fail:
 711         dsi_phy_disable_resource(phy);
 712 res_en_fail:
 713         return ret;
 714 }
 715
 716 void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
 717 {
 718         if (!phy || !phy->cfg->ops.disable)
 719                 return;
 720
 721         /* Save PLL status if it is a clock source */
 722         if (phy->usecase != MSM_DSI_PHY_SLAVE)
 723                 msm_dsi_pll_save_state(phy->pll);
 724
 725         phy->cfg->ops.disable(phy);
 726
 727         dsi_phy_regulator_disable(phy);
 728         dsi_phy_disable_resource(phy);
 729 }
 730
 731 void msm_dsi_phy_get_shared_timings(struct msm_dsi_phy *phy,
 732                         struct msm_dsi_phy_shared_timings *shared_timings)
 733 {
 734         memcpy(shared_timings, &phy->timing.shared_timings,
 735                sizeof(*shared_timings));
 736 }
 737
 738 struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy)
 739 {
 740         if (!phy)
 741                 return NULL;
 742
 743         return phy->pll;
 744 }
 745
 746 void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy,
 747                              enum msm_dsi_phy_usecase uc)
 748 {
 749         if (phy)
 750                 phy->usecase = uc;
 751 }