drivers/gpu/drm/nouveau/nouveau_connector.c

   1 /*
   2  * Copyright (C) 2008 Maarten Maathuis.
   3  * All Rights Reserved.
   4  *
   5  * Permission is hereby granted, free of charge, to any person obtaining
   6  * a copy of this software and associated documentation files (the
   7  * "Software"), to deal in the Software without restriction, including
   8  * without limitation the rights to use, copy, modify, merge, publish,
   9  * distribute, sublicense, and/or sell copies of the Software, and to
  10  * permit persons to whom the Software is furnished to do so, subject to
  11  * the following conditions:
  12  *
  13  * The above copyright notice and this permission notice (including the
  14  * next paragraph) shall be included in all copies or substantial
  15  * portions of the Software.
  16  *
  17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  18  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  19  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
  20  * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
  21  * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
  22  * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
  23  * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  24  *
  25  */
  26
  27 #include <acpi/button.h>
  28
  29 #include <linux/pm_runtime.h>
  30
  31 #include <drm/drmP.h>
  32 #include <drm/drm_edid.h>
  33 #include <drm/drm_crtc_helper.h>
  34
  35 #include "nouveau_reg.h"
  36 #include "nouveau_drm.h"
  37 #include "dispnv04/hw.h"
  38 #include "nouveau_acpi.h"
  39
  40 #include "nouveau_display.h"
  41 #include "nouveau_connector.h"
  42 #include "nouveau_encoder.h"
  43 #include "nouveau_crtc.h"
  44
  45 #include <subdev/i2c.h>
  46 #include <subdev/gpio.h>
  47
  48 MODULE_PARM_DESC(tv_disable, "Disable TV-out detection");
  49 static int nouveau_tv_disable = 0;
  50 module_param_named(tv_disable, nouveau_tv_disable, int, 0400);
  51
  52 MODULE_PARM_DESC(ignorelid, "Ignore ACPI lid status");
  53 static int nouveau_ignorelid = 0;
  54 module_param_named(ignorelid, nouveau_ignorelid, int, 0400);
  55
  56 MODULE_PARM_DESC(duallink, "Allow dual-link TMDS (default: enabled)");
  57 static int nouveau_duallink = 1;
  58 module_param_named(duallink, nouveau_duallink, int, 0400);
  59
  60 struct nouveau_encoder *
  61 find_encoder(struct drm_connector *connector, int type)
  62 {
  63         struct drm_device *dev = connector->dev;
  64         struct nouveau_encoder *nv_encoder;
  65         struct drm_mode_object *obj;
  66         int i, id;
  67
  68         for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
  69                 id = connector->encoder_ids[i];
  70                 if (!id)
  71                         break;
  72
  73                 obj = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER);
  74                 if (!obj)
  75                         continue;
  76                 nv_encoder = nouveau_encoder(obj_to_encoder(obj));
  77
  78                 if (type == DCB_OUTPUT_ANY || nv_encoder->dcb->type == type)
  79                         return nv_encoder;
  80         }
  81
  82         return NULL;
  83 }
  84
  85 struct nouveau_connector *
  86 nouveau_encoder_connector_get(struct nouveau_encoder *encoder)
  87 {
  88         struct drm_device *dev = to_drm_encoder(encoder)->dev;
  89         struct drm_connector *drm_connector;
  90
  91         list_for_each_entry(drm_connector, &dev->mode_config.connector_list, head) {
  92                 if (drm_connector->encoder == to_drm_encoder(encoder))
  93                         return nouveau_connector(drm_connector);
  94         }
  95
  96         return NULL;
  97 }
  98
  99 static void
 100 nouveau_connector_destroy(struct drm_connector *connector)
 101 {
 102         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 103         nouveau_event_ref(NULL, &nv_connector->hpd_func);
 104         kfree(nv_connector->edid);
 105         drm_sysfs_connector_remove(connector);
 106         drm_connector_cleanup(connector);
 107         kfree(connector);
 108 }
 109
 110 static struct nouveau_i2c_port *
 111 nouveau_connector_ddc_detect(struct drm_connector *connector,
 112                              struct nouveau_encoder **pnv_encoder)
 113 {
 114         struct drm_device *dev = connector->dev;
 115         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 116         struct nouveau_drm *drm = nouveau_drm(dev);
 117         struct nouveau_gpio *gpio = nouveau_gpio(drm->device);
 118         struct nouveau_i2c_port *port = NULL;
 119         int i, panel = -ENODEV;
 120
 121         /* eDP panels need powering on by us (if the VBIOS doesn't default it
 122          * to on) before doing any AUX channel transactions.  LVDS panel power
 123          * is handled by the SOR itself, and not required for LVDS DDC.
 124          */
 125         if (nv_connector->type == DCB_CONNECTOR_eDP) {
 126                 panel = gpio->get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff);
 127                 if (panel == 0) {
 128                         gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, 1);
 129                         msleep(300);
 130                 }
 131         }
 132
 133         for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
 134                 struct nouveau_encoder *nv_encoder;
 135                 struct drm_mode_object *obj;
 136                 int id;
 137
 138                 id = connector->encoder_ids[i];
 139                 if (!id)
 140                         break;
 141
 142                 obj = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER);
 143                 if (!obj)
 144                         continue;
 145                 nv_encoder = nouveau_encoder(obj_to_encoder(obj));
 146
 147                 port = nv_encoder->i2c;
 148                 if (port && nv_probe_i2c(port, 0x50)) {
 149                         *pnv_encoder = nv_encoder;
 150                         break;
 151                 }
 152
 153                 port = NULL;
 154         }
 155
 156         /* eDP panel not detected, restore panel power GPIO to previous
 157          * state to avoid confusing the SOR for other output types.
 158          */
 159         if (!port && panel == 0)
 160                 gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel);
 161
 162         return port;
 163 }
 164
 165 static struct nouveau_encoder *
 166 nouveau_connector_of_detect(struct drm_connector *connector)
 167 {
 168 #ifdef __powerpc__
 169         struct drm_device *dev = connector->dev;
 170         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 171         struct nouveau_encoder *nv_encoder;
 172         struct device_node *cn, *dn = pci_device_to_OF_node(dev->pdev);
 173
 174         if (!dn ||
 175             !((nv_encoder = find_encoder(connector, DCB_OUTPUT_TMDS)) ||
 176               (nv_encoder = find_encoder(connector, DCB_OUTPUT_ANALOG))))
 177                 return NULL;
 178
 179         for_each_child_of_node(dn, cn) {
 180                 const char *name = of_get_property(cn, "name", NULL);
 181                 const void *edid = of_get_property(cn, "EDID", NULL);
 182                 int idx = name ? name[strlen(name) - 1] - 'A' : 0;
 183
 184                 if (nv_encoder->dcb->i2c_index == idx && edid) {
 185                         nv_connector->edid =
 186                                 kmemdup(edid, EDID_LENGTH, GFP_KERNEL);
 187                         of_node_put(cn);
 188                         return nv_encoder;
 189                 }
 190         }
 191 #endif
 192         return NULL;
 193 }
 194
 195 static void
 196 nouveau_connector_set_encoder(struct drm_connector *connector,
 197                               struct nouveau_encoder *nv_encoder)
 198 {
 199         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 200         struct nouveau_drm *drm = nouveau_drm(connector->dev);
 201         struct drm_device *dev = connector->dev;
 202
 203         if (nv_connector->detected_encoder == nv_encoder)
 204                 return;
 205         nv_connector->detected_encoder = nv_encoder;
 206
 207         if (nv_device(drm->device)->card_type >= NV_50) {
 208                 connector->interlace_allowed = true;
 209                 connector->doublescan_allowed = true;
 210         } else
 211         if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS ||
 212             nv_encoder->dcb->type == DCB_OUTPUT_TMDS) {
 213                 connector->doublescan_allowed = false;
 214                 connector->interlace_allowed = false;
 215         } else {
 216                 connector->doublescan_allowed = true;
 217                 if (nv_device(drm->device)->card_type == NV_20 ||
 218                     ((nv_device(drm->device)->card_type == NV_10 ||
 219                       nv_device(drm->device)->card_type == NV_11) &&
 220                      (dev->pdev->device & 0x0ff0) != 0x0100 &&
 221                      (dev->pdev->device & 0x0ff0) != 0x0150))
 222                         /* HW is broken */
 223                         connector->interlace_allowed = false;
 224                 else
 225                         connector->interlace_allowed = true;
 226         }
 227
 228         if (nv_connector->type == DCB_CONNECTOR_DVI_I) {
 229                 drm_object_property_set_value(&connector->base,
 230                         dev->mode_config.dvi_i_subconnector_property,
 231                         nv_encoder->dcb->type == DCB_OUTPUT_TMDS ?
 232                         DRM_MODE_SUBCONNECTOR_DVID :
 233                         DRM_MODE_SUBCONNECTOR_DVIA);
 234         }
 235 }
 236
 237 static enum drm_connector_status
 238 nouveau_connector_detect(struct drm_connector *connector, bool force)
 239 {
 240         struct drm_device *dev = connector->dev;
 241         struct nouveau_drm *drm = nouveau_drm(dev);
 242         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 243         struct nouveau_encoder *nv_encoder = NULL;
 244         struct nouveau_encoder *nv_partner;
 245         struct nouveau_i2c_port *i2c;
 246         int type;
 247         int ret;
 248         enum drm_connector_status conn_status = connector_status_disconnected;
 249
 250         /* Cleanup the previous EDID block. */
 251         if (nv_connector->edid) {
 252                 drm_mode_connector_update_edid_property(connector, NULL);
 253                 kfree(nv_connector->edid);
 254                 nv_connector->edid = NULL;
 255         }
 256
 257         ret = pm_runtime_get_sync(connector->dev->dev);
 258         if (ret < 0)
 259                 return conn_status;
 260
 261         i2c = nouveau_connector_ddc_detect(connector, &nv_encoder);
 262         if (i2c) {
 263                 nv_connector->edid = drm_get_edid(connector, &i2c->adapter);
 264                 drm_mode_connector_update_edid_property(connector,
 265                                                         nv_connector->edid);
 266                 if (!nv_connector->edid) {
 267                         NV_ERROR(drm, "DDC responded, but no EDID for %s\n",
 268                                  drm_get_connector_name(connector));
 269                         goto detect_analog;
 270                 }
 271
 272                 if (nv_encoder->dcb->type == DCB_OUTPUT_DP &&
 273                     !nouveau_dp_detect(to_drm_encoder(nv_encoder))) {
 274                         NV_ERROR(drm, "Detected %s, but failed init\n",
 275                                  drm_get_connector_name(connector));
 276                         conn_status = connector_status_disconnected;
 277                         goto out;
 278                 }
 279
 280                 /* Override encoder type for DVI-I based on whether EDID
 281                  * says the display is digital or analog, both use the
 282                  * same i2c channel so the value returned from ddc_detect
 283                  * isn't necessarily correct.
 284                  */
 285                 nv_partner = NULL;
 286                 if (nv_encoder->dcb->type == DCB_OUTPUT_TMDS)
 287                         nv_partner = find_encoder(connector, DCB_OUTPUT_ANALOG);
 288                 if (nv_encoder->dcb->type == DCB_OUTPUT_ANALOG)
 289                         nv_partner = find_encoder(connector, DCB_OUTPUT_TMDS);
 290
 291                 if (nv_partner && ((nv_encoder->dcb->type == DCB_OUTPUT_ANALOG &&
 292                                     nv_partner->dcb->type == DCB_OUTPUT_TMDS) ||
 293                                    (nv_encoder->dcb->type == DCB_OUTPUT_TMDS &&
 294                                     nv_partner->dcb->type == DCB_OUTPUT_ANALOG))) {
 295                         if (nv_connector->edid->input & DRM_EDID_INPUT_DIGITAL)
 296                                 type = DCB_OUTPUT_TMDS;
 297                         else
 298                                 type = DCB_OUTPUT_ANALOG;
 299
 300                         nv_encoder = find_encoder(connector, type);
 301                 }
 302
 303                 nouveau_connector_set_encoder(connector, nv_encoder);
 304                 conn_status = connector_status_connected;
 305                 goto out;
 306         }
 307
 308         nv_encoder = nouveau_connector_of_detect(connector);
 309         if (nv_encoder) {
 310                 nouveau_connector_set_encoder(connector, nv_encoder);
 311                 conn_status = connector_status_connected;
 312                 goto out;
 313         }
 314
 315 detect_analog:
 316         nv_encoder = find_encoder(connector, DCB_OUTPUT_ANALOG);
 317         if (!nv_encoder && !nouveau_tv_disable)
 318                 nv_encoder = find_encoder(connector, DCB_OUTPUT_TV);
 319         if (nv_encoder && force) {
 320                 struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
 321                 struct drm_encoder_helper_funcs *helper =
 322                                                 encoder->helper_private;
 323
 324                 if (helper->detect(encoder, connector) ==
 325                                                 connector_status_connected) {
 326                         nouveau_connector_set_encoder(connector, nv_encoder);
 327                         conn_status = connector_status_connected;
 328                         goto out;
 329                 }
 330
 331         }
 332
 333  out:
 334
 335         pm_runtime_mark_last_busy(connector->dev->dev);
 336         pm_runtime_put_autosuspend(connector->dev->dev);
 337
 338         return conn_status;
 339 }
 340
 341 static enum drm_connector_status
 342 nouveau_connector_detect_lvds(struct drm_connector *connector, bool force)
 343 {
 344         struct drm_device *dev = connector->dev;
 345         struct nouveau_drm *drm = nouveau_drm(dev);
 346         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 347         struct nouveau_encoder *nv_encoder = NULL;
 348         enum drm_connector_status status = connector_status_disconnected;
 349
 350         /* Cleanup the previous EDID block. */
 351         if (nv_connector->edid) {
 352                 drm_mode_connector_update_edid_property(connector, NULL);
 353                 kfree(nv_connector->edid);
 354                 nv_connector->edid = NULL;
 355         }
 356
 357         nv_encoder = find_encoder(connector, DCB_OUTPUT_LVDS);
 358         if (!nv_encoder)
 359                 return connector_status_disconnected;
 360
 361         /* Try retrieving EDID via DDC */
 362         if (!drm->vbios.fp_no_ddc) {
 363                 status = nouveau_connector_detect(connector, force);
 364                 if (status == connector_status_connected)
 365                         goto out;
 366         }
 367
 368         /* On some laptops (Sony, i'm looking at you) there appears to
 369          * be no direct way of accessing the panel's EDID.  The only
 370          * option available to us appears to be to ask ACPI for help..
 371          *
 372          * It's important this check's before trying straps, one of the
 373          * said manufacturer's laptops are configured in such a way
 374          * the nouveau decides an entry in the VBIOS FP mode table is
 375          * valid - it's not (rh#613284)
 376          */
 377         if (nv_encoder->dcb->lvdsconf.use_acpi_for_edid) {
 378                 if ((nv_connector->edid = nouveau_acpi_edid(dev, connector))) {
 379                         status = connector_status_connected;
 380                         goto out;
 381                 }
 382         }
 383
 384         /* If no EDID found above, and the VBIOS indicates a hardcoded
 385          * modeline is avalilable for the panel, set it as the panel's
 386          * native mode and exit.
 387          */
 388         if (nouveau_bios_fp_mode(dev, NULL) && (drm->vbios.fp_no_ddc ||
 389             nv_encoder->dcb->lvdsconf.use_straps_for_mode)) {
 390                 status = connector_status_connected;
 391                 goto out;
 392         }
 393
 394         /* Still nothing, some VBIOS images have a hardcoded EDID block
 395          * stored for the panel stored in them.
 396          */
 397         if (!drm->vbios.fp_no_ddc) {
 398                 struct edid *edid =
 399                         (struct edid *)nouveau_bios_embedded_edid(dev);
 400                 if (edid) {
 401                         nv_connector->edid =
 402                                         kmemdup(edid, EDID_LENGTH, GFP_KERNEL);
 403                         if (nv_connector->edid)
 404                                 status = connector_status_connected;
 405                 }
 406         }
 407
 408 out:
 409 #if defined(CONFIG_ACPI_BUTTON) || \
 410         (defined(CONFIG_ACPI_BUTTON_MODULE) && defined(MODULE))
 411         if (status == connector_status_connected &&
 412             !nouveau_ignorelid && !acpi_lid_open())
 413                 status = connector_status_unknown;
 414 #endif
 415
 416         drm_mode_connector_update_edid_property(connector, nv_connector->edid);
 417         nouveau_connector_set_encoder(connector, nv_encoder);
 418         return status;
 419 }
 420
 421 static void
 422 nouveau_connector_force(struct drm_connector *connector)
 423 {
 424         struct nouveau_drm *drm = nouveau_drm(connector->dev);
 425         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 426         struct nouveau_encoder *nv_encoder;
 427         int type;
 428
 429         if (nv_connector->type == DCB_CONNECTOR_DVI_I) {
 430                 if (connector->force == DRM_FORCE_ON_DIGITAL)
 431                         type = DCB_OUTPUT_TMDS;
 432                 else
 433                         type = DCB_OUTPUT_ANALOG;
 434         } else
 435                 type = DCB_OUTPUT_ANY;
 436
 437         nv_encoder = find_encoder(connector, type);
 438         if (!nv_encoder) {
 439                 NV_ERROR(drm, "can't find encoder to force %s on!\n",
 440                          drm_get_connector_name(connector));
 441                 connector->status = connector_status_disconnected;
 442                 return;
 443         }
 444
 445         nouveau_connector_set_encoder(connector, nv_encoder);
 446 }
 447
 448 static int
 449 nouveau_connector_set_property(struct drm_connector *connector,
 450                                struct drm_property *property, uint64_t value)
 451 {
 452         struct nouveau_display *disp = nouveau_display(connector->dev);
 453         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 454         struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
 455         struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
 456         struct drm_device *dev = connector->dev;
 457         struct nouveau_crtc *nv_crtc;
 458         int ret;
 459
 460         nv_crtc = NULL;
 461         if (connector->encoder && connector->encoder->crtc)
 462                 nv_crtc = nouveau_crtc(connector->encoder->crtc);
 463
 464         /* Scaling mode */
 465         if (property == dev->mode_config.scaling_mode_property) {
 466                 bool modeset = false;
 467
 468                 switch (value) {
 469                 case DRM_MODE_SCALE_NONE:
 470                 case DRM_MODE_SCALE_FULLSCREEN:
 471                 case DRM_MODE_SCALE_CENTER:
 472                 case DRM_MODE_SCALE_ASPECT:
 473                         break;
 474                 default:
 475                         return -EINVAL;
 476                 }
 477
 478                 /* LVDS always needs gpu scaling */
 479                 if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS &&
 480                     value == DRM_MODE_SCALE_NONE)
 481                         return -EINVAL;
 482
 483                 /* Changing between GPU and panel scaling requires a full
 484                  * modeset
 485                  */
 486                 if ((nv_connector->scaling_mode == DRM_MODE_SCALE_NONE) ||
 487                     (value == DRM_MODE_SCALE_NONE))
 488                         modeset = true;
 489                 nv_connector->scaling_mode = value;
 490
 491                 if (!nv_crtc)
 492                         return 0;
 493
 494                 if (modeset || !nv_crtc->set_scale) {
 495                         ret = drm_crtc_helper_set_mode(&nv_crtc->base,
 496                                                         &nv_crtc->base.mode,
 497                                                         nv_crtc->base.x,
 498                                                         nv_crtc->base.y, NULL);
 499                         if (!ret)
 500                                 return -EINVAL;
 501                 } else {
 502                         ret = nv_crtc->set_scale(nv_crtc, true);
 503                         if (ret)
 504                                 return ret;
 505                 }
 506
 507                 return 0;
 508         }
 509
 510         /* Underscan */
 511         if (property == disp->underscan_property) {
 512                 if (nv_connector->underscan != value) {
 513                         nv_connector->underscan = value;
 514                         if (!nv_crtc || !nv_crtc->set_scale)
 515                                 return 0;
 516
 517                         return nv_crtc->set_scale(nv_crtc, true);
 518                 }
 519
 520                 return 0;
 521         }
 522
 523         if (property == disp->underscan_hborder_property) {
 524                 if (nv_connector->underscan_hborder != value) {
 525                         nv_connector->underscan_hborder = value;
 526                         if (!nv_crtc || !nv_crtc->set_scale)
 527                                 return 0;
 528
 529                         return nv_crtc->set_scale(nv_crtc, true);
 530                 }
 531
 532                 return 0;
 533         }
 534
 535         if (property == disp->underscan_vborder_property) {
 536                 if (nv_connector->underscan_vborder != value) {
 537                         nv_connector->underscan_vborder = value;
 538                         if (!nv_crtc || !nv_crtc->set_scale)
 539                                 return 0;
 540
 541                         return nv_crtc->set_scale(nv_crtc, true);
 542                 }
 543
 544                 return 0;
 545         }
 546
 547         /* Dithering */
 548         if (property == disp->dithering_mode) {
 549                 nv_connector->dithering_mode = value;
 550                 if (!nv_crtc || !nv_crtc->set_dither)
 551                         return 0;
 552
 553                 return nv_crtc->set_dither(nv_crtc, true);
 554         }
 555
 556         if (property == disp->dithering_depth) {
 557                 nv_connector->dithering_depth = value;
 558                 if (!nv_crtc || !nv_crtc->set_dither)
 559                         return 0;
 560
 561                 return nv_crtc->set_dither(nv_crtc, true);
 562         }
 563
 564         if (nv_crtc && nv_crtc->set_color_vibrance) {
 565                 /* Hue */
 566                 if (property == disp->vibrant_hue_property) {
 567                         nv_crtc->vibrant_hue = value - 90;
 568                         return nv_crtc->set_color_vibrance(nv_crtc, true);
 569                 }
 570                 /* Saturation */
 571                 if (property == disp->color_vibrance_property) {
 572                         nv_crtc->color_vibrance = value - 100;
 573                         return nv_crtc->set_color_vibrance(nv_crtc, true);
 574                 }
 575         }
 576
 577         if (nv_encoder && nv_encoder->dcb->type == DCB_OUTPUT_TV)
 578                 return get_slave_funcs(encoder)->set_property(
 579                         encoder, connector, property, value);
 580
 581         return -EINVAL;
 582 }
 583
 584 static struct drm_display_mode *
 585 nouveau_connector_native_mode(struct drm_connector *connector)
 586 {
 587         struct drm_connector_helper_funcs *helper = connector->helper_private;
 588         struct nouveau_drm *drm = nouveau_drm(connector->dev);
 589         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 590         struct drm_device *dev = connector->dev;
 591         struct drm_display_mode *mode, *largest = NULL;
 592         int high_w = 0, high_h = 0, high_v = 0;
 593
 594         list_for_each_entry(mode, &nv_connector->base.probed_modes, head) {
 595                 mode->vrefresh = drm_mode_vrefresh(mode);
 596                 if (helper->mode_valid(connector, mode) != MODE_OK ||
 597                     (mode->flags & DRM_MODE_FLAG_INTERLACE))
 598                         continue;
 599
 600                 /* Use preferred mode if there is one.. */
 601                 if (mode->type & DRM_MODE_TYPE_PREFERRED) {
 602                         NV_DEBUG(drm, "native mode from preferred\n");
 603                         return drm_mode_duplicate(dev, mode);
 604                 }
 605
 606                 /* Otherwise, take the resolution with the largest width, then
 607                  * height, then vertical refresh
 608                  */
 609                 if (mode->hdisplay < high_w)
 610                         continue;
 611
 612                 if (mode->hdisplay == high_w && mode->vdisplay < high_h)
 613                         continue;
 614
 615                 if (mode->hdisplay == high_w && mode->vdisplay == high_h &&
 616                     mode->vrefresh < high_v)
 617                         continue;
 618
 619                 high_w = mode->hdisplay;
 620                 high_h = mode->vdisplay;
 621                 high_v = mode->vrefresh;
 622                 largest = mode;
 623         }
 624
 625         NV_DEBUG(drm, "native mode from largest: %dx%d@%d\n",
 626                       high_w, high_h, high_v);
 627         return largest ? drm_mode_duplicate(dev, largest) : NULL;
 628 }
 629
 630 struct moderec {
 631         int hdisplay;
 632         int vdisplay;
 633 };
 634
 635 static struct moderec scaler_modes[] = {
 636         { 1920, 1200 },
 637         { 1920, 1080 },
 638         { 1680, 1050 },
 639         { 1600, 1200 },
 640         { 1400, 1050 },
 641         { 1280, 1024 },
 642         { 1280, 960 },
 643         { 1152, 864 },
 644         { 1024, 768 },
 645         { 800, 600 },
 646         { 720, 400 },
 647         { 640, 480 },
 648         { 640, 400 },
 649         { 640, 350 },
 650         {}
 651 };
 652
 653 static int
 654 nouveau_connector_scaler_modes_add(struct drm_connector *connector)
 655 {
 656         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 657         struct drm_display_mode *native = nv_connector->native_mode, *m;
 658         struct drm_device *dev = connector->dev;
 659         struct moderec *mode = &scaler_modes[0];
 660         int modes = 0;
 661
 662         if (!native)
 663                 return 0;
 664
 665         while (mode->hdisplay) {
 666                 if (mode->hdisplay <= native->hdisplay &&
 667                     mode->vdisplay <= native->vdisplay) {
 668                         m = drm_cvt_mode(dev, mode->hdisplay, mode->vdisplay,
 669                                          drm_mode_vrefresh(native), false,
 670                                          false, false);
 671                         if (!m)
 672                                 continue;
 673
 674                         m->type |= DRM_MODE_TYPE_DRIVER;
 675
 676                         drm_mode_probed_add(connector, m);
 677                         modes++;
 678                 }
 679
 680                 mode++;
 681         }
 682
 683         return modes;
 684 }
 685
 686 static void
 687 nouveau_connector_detect_depth(struct drm_connector *connector)
 688 {
 689         struct nouveau_drm *drm = nouveau_drm(connector->dev);
 690         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 691         struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
 692         struct nvbios *bios = &drm->vbios;
 693         struct drm_display_mode *mode = nv_connector->native_mode;
 694         bool duallink;
 695
 696         /* if the edid is feeling nice enough to provide this info, use it */
 697         if (nv_connector->edid && connector->display_info.bpc)
 698                 return;
 699
 700         /* EDID 1.4 is *supposed* to be supported on eDP, but, Apple... */
 701         if (nv_connector->type == DCB_CONNECTOR_eDP) {
 702                 connector->display_info.bpc = 6;
 703                 return;
 704         }
 705
 706         /* we're out of options unless we're LVDS, default to 8bpc */
 707         if (nv_encoder->dcb->type != DCB_OUTPUT_LVDS) {
 708                 connector->display_info.bpc = 8;
 709                 return;
 710         }
 711
 712         connector->display_info.bpc = 6;
 713
 714         /* LVDS: panel straps */
 715         if (bios->fp_no_ddc) {
 716                 if (bios->fp.if_is_24bit)
 717                         connector->display_info.bpc = 8;
 718                 return;
 719         }
 720
 721         /* LVDS: DDC panel, need to first determine the number of links to
 722          * know which if_is_24bit flag to check...
 723          */
 724         if (nv_connector->edid &&
 725             nv_connector->type == DCB_CONNECTOR_LVDS_SPWG)
 726                 duallink = ((u8 *)nv_connector->edid)[121] == 2;
 727         else
 728                 duallink = mode->clock >= bios->fp.duallink_transition_clk;
 729
 730         if ((!duallink && (bios->fp.strapless_is_24bit & 1)) ||
 731             ( duallink && (bios->fp.strapless_is_24bit & 2)))
 732                 connector->display_info.bpc = 8;
 733 }
 734
 735 static int
 736 nouveau_connector_get_modes(struct drm_connector *connector)
 737 {
 738         struct drm_device *dev = connector->dev;
 739         struct nouveau_drm *drm = nouveau_drm(dev);
 740         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 741         struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
 742         struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
 743         int ret = 0;
 744
 745         /* destroy the native mode, the attached monitor could have changed.
 746          */
 747         if (nv_connector->native_mode) {
 748                 drm_mode_destroy(dev, nv_connector->native_mode);
 749                 nv_connector->native_mode = NULL;
 750         }
 751
 752         if (nv_connector->edid)
 753                 ret = drm_add_edid_modes(connector, nv_connector->edid);
 754         else
 755         if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS &&
 756             (nv_encoder->dcb->lvdsconf.use_straps_for_mode ||
 757              drm->vbios.fp_no_ddc) && nouveau_bios_fp_mode(dev, NULL)) {
 758                 struct drm_display_mode mode;
 759
 760                 nouveau_bios_fp_mode(dev, &mode);
 761                 nv_connector->native_mode = drm_mode_duplicate(dev, &mode);
 762         }
 763
 764         /* Determine display colour depth for everything except LVDS now,
 765          * DP requires this before mode_valid() is called.
 766          */
 767         if (connector->connector_type != DRM_MODE_CONNECTOR_LVDS)
 768                 nouveau_connector_detect_depth(connector);
 769
 770         /* Find the native mode if this is a digital panel, if we didn't
 771          * find any modes through DDC previously add the native mode to
 772          * the list of modes.
 773          */
 774         if (!nv_connector->native_mode)
 775                 nv_connector->native_mode =
 776                         nouveau_connector_native_mode(connector);
 777         if (ret == 0 && nv_connector->native_mode) {
 778                 struct drm_display_mode *mode;
 779
 780                 mode = drm_mode_duplicate(dev, nv_connector->native_mode);
 781                 drm_mode_probed_add(connector, mode);
 782                 ret = 1;
 783         }
 784
 785         /* Determine LVDS colour depth, must happen after determining
 786          * "native" mode as some VBIOS tables require us to use the
 787          * pixel clock as part of the lookup...
 788          */
 789         if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
 790                 nouveau_connector_detect_depth(connector);
 791
 792         if (nv_encoder->dcb->type == DCB_OUTPUT_TV)
 793                 ret = get_slave_funcs(encoder)->get_modes(encoder, connector);
 794
 795         if (nv_connector->type == DCB_CONNECTOR_LVDS ||
 796             nv_connector->type == DCB_CONNECTOR_LVDS_SPWG ||
 797             nv_connector->type == DCB_CONNECTOR_eDP)
 798                 ret += nouveau_connector_scaler_modes_add(connector);
 799
 800         return ret;
 801 }
 802
 803 static unsigned
 804 get_tmds_link_bandwidth(struct drm_connector *connector)
 805 {
 806         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 807         struct nouveau_drm *drm = nouveau_drm(connector->dev);
 808         struct dcb_output *dcb = nv_connector->detected_encoder->dcb;
 809
 810         if (dcb->location != DCB_LOC_ON_CHIP ||
 811             nv_device(drm->device)->chipset >= 0x46)
 812                 return 165000;
 813         else if (nv_device(drm->device)->chipset >= 0x40)
 814                 return 155000;
 815         else if (nv_device(drm->device)->chipset >= 0x18)
 816                 return 135000;
 817         else
 818                 return 112000;
 819 }
 820
 821 static int
 822 nouveau_connector_mode_valid(struct drm_connector *connector,
 823                              struct drm_display_mode *mode)
 824 {
 825         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 826         struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
 827         struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
 828         unsigned min_clock = 25000, max_clock = min_clock;
 829         unsigned clock = mode->clock;
 830
 831         switch (nv_encoder->dcb->type) {
 832         case DCB_OUTPUT_LVDS:
 833                 if (nv_connector->native_mode &&
 834                     (mode->hdisplay > nv_connector->native_mode->hdisplay ||
 835                      mode->vdisplay > nv_connector->native_mode->vdisplay))
 836                         return MODE_PANEL;
 837
 838                 min_clock = 0;
 839                 max_clock = 400000;
 840                 break;
 841         case DCB_OUTPUT_TMDS:
 842                 max_clock = get_tmds_link_bandwidth(connector);
 843                 if (nouveau_duallink && nv_encoder->dcb->duallink_possible)
 844                         max_clock *= 2;
 845                 break;
 846         case DCB_OUTPUT_ANALOG:
 847                 max_clock = nv_encoder->dcb->crtconf.maxfreq;
 848                 if (!max_clock)
 849                         max_clock = 350000;
 850                 break;
 851         case DCB_OUTPUT_TV:
 852                 return get_slave_funcs(encoder)->mode_valid(encoder, mode);
 853         case DCB_OUTPUT_DP:
 854                 max_clock  = nv_encoder->dp.link_nr;
 855                 max_clock *= nv_encoder->dp.link_bw;
 856                 clock = clock * (connector->display_info.bpc * 3) / 10;
 857                 break;
 858         default:
 859                 BUG_ON(1);
 860                 return MODE_BAD;
 861         }
 862
 863         if (clock < min_clock)
 864                 return MODE_CLOCK_LOW;
 865
 866         if (clock > max_clock)
 867                 return MODE_CLOCK_HIGH;
 868
 869         return MODE_OK;
 870 }
 871
 872 static struct drm_encoder *
 873 nouveau_connector_best_encoder(struct drm_connector *connector)
 874 {
 875         struct nouveau_connector *nv_connector = nouveau_connector(connector);
 876
 877         if (nv_connector->detected_encoder)
 878                 return to_drm_encoder(nv_connector->detected_encoder);
 879
 880         return NULL;
 881 }
 882
 883 static const struct drm_connector_helper_funcs
 884 nouveau_connector_helper_funcs = {
 885         .get_modes = nouveau_connector_get_modes,
 886         .mode_valid = nouveau_connector_mode_valid,
 887         .best_encoder = nouveau_connector_best_encoder,
 888 };
 889
 890 static const struct drm_connector_funcs
 891 nouveau_connector_funcs = {
 892         .dpms = drm_helper_connector_dpms,
 893         .save = NULL,
 894         .restore = NULL,
 895         .detect = nouveau_connector_detect,
 896         .destroy = nouveau_connector_destroy,
 897         .fill_modes = drm_helper_probe_single_connector_modes,
 898         .set_property = nouveau_connector_set_property,
 899         .force = nouveau_connector_force
 900 };
 901
 902 static const struct drm_connector_funcs
 903 nouveau_connector_funcs_lvds = {
 904         .dpms = drm_helper_connector_dpms,
 905         .save = NULL,
 906         .restore = NULL,
 907         .detect = nouveau_connector_detect_lvds,
 908         .destroy = nouveau_connector_destroy,
 909         .fill_modes = drm_helper_probe_single_connector_modes,
 910         .set_property = nouveau_connector_set_property,
 911         .force = nouveau_connector_force
 912 };
 913
 914 static void
 915 nouveau_connector_hotplug_work(struct work_struct *work)
 916 {
 917         struct nouveau_connector *nv_connector =
 918                 container_of(work, struct nouveau_connector, hpd_work);
 919         struct drm_connector *connector = &nv_connector->base;
 920         struct drm_device *dev = connector->dev;
 921         struct nouveau_drm *drm = nouveau_drm(dev);
 922         struct nouveau_gpio *gpio = nouveau_gpio(drm->device);
 923         bool plugged = gpio->get(gpio, 0, nv_connector->hpd.func, 0xff);
 924
 925         NV_DEBUG(drm, "%splugged %s\n", plugged ? "" : "un",
 926                  drm_get_connector_name(connector));
 927
 928         if (plugged)
 929                 drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
 930         else
 931                 drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
 932
 933         drm_helper_hpd_irq_event(dev);
 934 }
 935
 936 static int
 937 nouveau_connector_hotplug(void *data, int index)
 938 {
 939         struct nouveau_connector *nv_connector = data;
 940         schedule_work(&nv_connector->hpd_work);
 941         return NVKM_EVENT_KEEP;
 942 }
 943
 944 static int
 945 drm_conntype_from_dcb(enum dcb_connector_type dcb)
 946 {
 947         switch (dcb) {
 948         case DCB_CONNECTOR_VGA      : return DRM_MODE_CONNECTOR_VGA;
 949         case DCB_CONNECTOR_TV_0     :
 950         case DCB_CONNECTOR_TV_1     :
 951         case DCB_CONNECTOR_TV_3     : return DRM_MODE_CONNECTOR_TV;
 952         case DCB_CONNECTOR_DMS59_0  :
 953         case DCB_CONNECTOR_DMS59_1  :
 954         case DCB_CONNECTOR_DVI_I    : return DRM_MODE_CONNECTOR_DVII;
 955         case DCB_CONNECTOR_DVI_D    : return DRM_MODE_CONNECTOR_DVID;
 956         case DCB_CONNECTOR_LVDS     :
 957         case DCB_CONNECTOR_LVDS_SPWG: return DRM_MODE_CONNECTOR_LVDS;
 958         case DCB_CONNECTOR_DMS59_DP0:
 959         case DCB_CONNECTOR_DMS59_DP1:
 960         case DCB_CONNECTOR_DP       : return DRM_MODE_CONNECTOR_DisplayPort;
 961         case DCB_CONNECTOR_eDP      : return DRM_MODE_CONNECTOR_eDP;
 962         case DCB_CONNECTOR_HDMI_0   :
 963         case DCB_CONNECTOR_HDMI_1   : return DRM_MODE_CONNECTOR_HDMIA;
 964         default:
 965                 break;
 966         }
 967
 968         return DRM_MODE_CONNECTOR_Unknown;
 969 }
 970
 971 struct drm_connector *
 972 nouveau_connector_create(struct drm_device *dev, int index)
 973 {
 974         const struct drm_connector_funcs *funcs = &nouveau_connector_funcs;
 975         struct nouveau_drm *drm = nouveau_drm(dev);
 976         struct nouveau_gpio *gpio = nouveau_gpio(drm->device);
 977         struct nouveau_display *disp = nouveau_display(dev);
 978         struct nouveau_connector *nv_connector = NULL;
 979         struct drm_connector *connector;
 980         int type, ret = 0;
 981         bool dummy;
 982
 983         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 984                 nv_connector = nouveau_connector(connector);
 985                 if (nv_connector->index == index)
 986                         return connector;
 987         }
 988
 989         nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL);
 990         if (!nv_connector)
 991                 return ERR_PTR(-ENOMEM);
 992
 993         connector = &nv_connector->base;
 994         INIT_WORK(&nv_connector->hpd_work, nouveau_connector_hotplug_work);
 995         nv_connector->index = index;
 996
 997         /* attempt to parse vbios connector type and hotplug gpio */
 998         nv_connector->dcb = olddcb_conn(dev, index);
 999         if (nv_connector->dcb) {
1000                 static const u8 hpd[16] = {
1001                         0xff, 0x07, 0x08, 0xff, 0xff, 0x51, 0x52, 0xff,
1002                         0xff, 0xff, 0xff, 0xff, 0xff, 0x5e, 0x5f, 0x60,
1003                 };
1004
1005                 u32 entry = ROM16(nv_connector->dcb[0]);
1006                 if (olddcb_conntab(dev)[3] >= 4)
1007                         entry |= (u32)ROM16(nv_connector->dcb[2]) << 16;
1008
1009                 ret = gpio->find(gpio, 0, hpd[ffs((entry & 0x07033000) >> 12)],
1010                                  DCB_GPIO_UNUSED, &nv_connector->hpd);
1011                 if (ret)
1012                         nv_connector->hpd.func = DCB_GPIO_UNUSED;
1013
1014                 if (nv_connector->hpd.func != DCB_GPIO_UNUSED) {
1015                         nouveau_event_new(gpio->events, nv_connector->hpd.line,
1016                                           nouveau_connector_hotplug,
1017                                           nv_connector,
1018                                          &nv_connector->hpd_func);
1019                 }
1020
1021                 nv_connector->type = nv_connector->dcb[0];
1022                 if (drm_conntype_from_dcb(nv_connector->type) ==
1023                                           DRM_MODE_CONNECTOR_Unknown) {
1024                         NV_WARN(drm, "unknown connector type %02x\n",
1025                                 nv_connector->type);
1026                         nv_connector->type = DCB_CONNECTOR_NONE;
1027                 }
1028
1029                 /* Gigabyte NX85T */
1030                 if (nv_match_device(dev, 0x0421, 0x1458, 0x344c)) {
1031                         if (nv_connector->type == DCB_CONNECTOR_HDMI_1)
1032                                 nv_connector->type = DCB_CONNECTOR_DVI_I;
1033                 }
1034
1035                 /* Gigabyte GV-NX86T512H */
1036                 if (nv_match_device(dev, 0x0402, 0x1458, 0x3455)) {
1037                         if (nv_connector->type == DCB_CONNECTOR_HDMI_1)
1038                                 nv_connector->type = DCB_CONNECTOR_DVI_I;
1039                 }
1040         } else {
1041                 nv_connector->type = DCB_CONNECTOR_NONE;
1042                 nv_connector->hpd.func = DCB_GPIO_UNUSED;
1043         }
1044
1045         /* no vbios data, or an unknown dcb connector type - attempt to
1046          * figure out something suitable ourselves
1047          */
1048         if (nv_connector->type == DCB_CONNECTOR_NONE) {
1049                 struct nouveau_drm *drm = nouveau_drm(dev);
1050                 struct dcb_table *dcbt = &drm->vbios.dcb;
1051                 u32 encoders = 0;
1052                 int i;
1053
1054                 for (i = 0; i < dcbt->entries; i++) {
1055                         if (dcbt->entry[i].connector == nv_connector->index)
1056                                 encoders |= (1 << dcbt->entry[i].type);
1057                 }
1058
1059                 if (encoders & (1 << DCB_OUTPUT_DP)) {
1060                         if (encoders & (1 << DCB_OUTPUT_TMDS))
1061                                 nv_connector->type = DCB_CONNECTOR_DP;
1062                         else
1063                                 nv_connector->type = DCB_CONNECTOR_eDP;
1064                 } else
1065                 if (encoders & (1 << DCB_OUTPUT_TMDS)) {
1066                         if (encoders & (1 << DCB_OUTPUT_ANALOG))
1067                                 nv_connector->type = DCB_CONNECTOR_DVI_I;
1068                         else
1069                                 nv_connector->type = DCB_CONNECTOR_DVI_D;
1070                 } else
1071                 if (encoders & (1 << DCB_OUTPUT_ANALOG)) {
1072                         nv_connector->type = DCB_CONNECTOR_VGA;
1073                 } else
1074                 if (encoders & (1 << DCB_OUTPUT_LVDS)) {
1075                         nv_connector->type = DCB_CONNECTOR_LVDS;
1076                 } else
1077                 if (encoders & (1 << DCB_OUTPUT_TV)) {
1078                         nv_connector->type = DCB_CONNECTOR_TV_0;
1079                 }
1080         }
1081
1082         type = drm_conntype_from_dcb(nv_connector->type);
1083         if (type == DRM_MODE_CONNECTOR_LVDS) {
1084                 ret = nouveau_bios_parse_lvds_table(dev, 0, &dummy, &dummy);
1085                 if (ret) {
1086                         NV_ERROR(drm, "Error parsing LVDS table, disabling\n");
1087                         kfree(nv_connector);
1088                         return ERR_PTR(ret);
1089                 }
1090
1091                 funcs = &nouveau_connector_funcs_lvds;
1092         } else {
1093                 funcs = &nouveau_connector_funcs;
1094         }
1095
1096         /* defaults, will get overridden in detect() */
1097         connector->interlace_allowed = false;
1098         connector->doublescan_allowed = false;
1099
1100         drm_connector_init(dev, connector, funcs, type);
1101         drm_connector_helper_add(connector, &nouveau_connector_helper_funcs);
1102
1103         /* Init DVI-I specific properties */
1104         if (nv_connector->type == DCB_CONNECTOR_DVI_I)
1105                 drm_object_attach_property(&connector->base, dev->mode_config.dvi_i_subconnector_property, 0);
1106
1107         /* Add overscan compensation options to digital outputs */
1108         if (disp->underscan_property &&
1109             (type == DRM_MODE_CONNECTOR_DVID ||
1110              type == DRM_MODE_CONNECTOR_DVII ||
1111              type == DRM_MODE_CONNECTOR_HDMIA ||
1112              type == DRM_MODE_CONNECTOR_DisplayPort)) {
1113                 drm_object_attach_property(&connector->base,
1114                                               disp->underscan_property,
1115                                               UNDERSCAN_OFF);
1116                 drm_object_attach_property(&connector->base,
1117                                               disp->underscan_hborder_property,
1118                                               0);
1119                 drm_object_attach_property(&connector->base,
1120                                               disp->underscan_vborder_property,
1121                                               0);
1122         }
1123
1124         /* Add hue and saturation options */
1125         if (disp->vibrant_hue_property)
1126                 drm_object_attach_property(&connector->base,
1127                                               disp->vibrant_hue_property,
1128                                               90);
1129         if (disp->color_vibrance_property)
1130                 drm_object_attach_property(&connector->base,
1131                                               disp->color_vibrance_property,
1132                                               150);
1133
1134         switch (nv_connector->type) {
1135         case DCB_CONNECTOR_VGA:
1136                 if (nv_device(drm->device)->card_type >= NV_50) {
1137                         drm_object_attach_property(&connector->base,
1138                                         dev->mode_config.scaling_mode_property,
1139                                         nv_connector->scaling_mode);
1140                 }
1141                 /* fall-through */
1142         case DCB_CONNECTOR_TV_0:
1143         case DCB_CONNECTOR_TV_1:
1144         case DCB_CONNECTOR_TV_3:
1145                 nv_connector->scaling_mode = DRM_MODE_SCALE_NONE;
1146                 break;
1147         default:
1148                 nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN;
1149
1150                 drm_object_attach_property(&connector->base,
1151                                 dev->mode_config.scaling_mode_property,
1152                                 nv_connector->scaling_mode);
1153                 if (disp->dithering_mode) {
1154                         nv_connector->dithering_mode = DITHERING_MODE_AUTO;
1155                         drm_object_attach_property(&connector->base,
1156                                                 disp->dithering_mode,
1157                                                 nv_connector->dithering_mode);
1158                 }
1159                 if (disp->dithering_depth) {
1160                         nv_connector->dithering_depth = DITHERING_DEPTH_AUTO;
1161                         drm_object_attach_property(&connector->base,
1162                                                 disp->dithering_depth,
1163                                                 nv_connector->dithering_depth);
1164                 }
1165                 break;
1166         }
1167
1168         connector->polled = DRM_CONNECTOR_POLL_CONNECT;
1169         if (nv_connector->hpd.func != DCB_GPIO_UNUSED)
1170                 connector->polled = DRM_CONNECTOR_POLL_HPD;
1171
1172         drm_sysfs_connector_add(connector);
1173         return connector;
1174 }