1 # SPDX-License-Identifier: GPL-2.0-only
6 Panel registration and lookup framework.
9 depends on DRM && DRM_PANEL
11 config DRM_PANEL_ARM_VERSATILE
12 tristate "ARM Versatile panel driver"
15 select VIDEOMODE_HELPERS
17 This driver supports the ARM Versatile panels connected to ARM
18 reference designs. The panel is detected using special registers
19 in the Versatile family syscon registers.
21 config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
22 tristate "ASUS Z00T TM5P5 NT35596 panel"
23 depends on GPIOLIB && OF
24 depends on DRM_MIPI_DSI
25 depends on BACKLIGHT_CLASS_DEVICE
27 Say Y here if you want to enable support for the ASUS TMP5P5
28 NT35596 1080x1920 video mode panel as found in some Asus
29 Zenfone 2 Laser Z00T devices.
31 config DRM_PANEL_BOE_HIMAX8279D
32 tristate "Boe Himax8279d panel"
34 depends on DRM_MIPI_DSI
35 depends on BACKLIGHT_CLASS_DEVICE
37 Say Y here if you want to enable support for Boe Himax8279d
38 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
39 24 bit RGB per pixel. It provides a MIPI DSI interface to
40 the host and has a built-in LED backlight.
42 config DRM_PANEL_BOE_TV101WUM_NL6
43 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
45 depends on DRM_MIPI_DSI
46 depends on BACKLIGHT_CLASS_DEVICE
48 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
49 45NA WUXGA PANEL DSI Video Mode panel
52 tristate "Generic LVDS panel driver"
54 depends on BACKLIGHT_CLASS_DEVICE
55 select VIDEOMODE_HELPERS
57 This driver supports LVDS panels that don't require device-specific
58 handling of power supplies or control signals. It implements automatic
59 backlight handling if the panel is attached to a backlight controller.
61 config DRM_PANEL_SIMPLE
62 tristate "support for simple panels"
64 depends on BACKLIGHT_CLASS_DEVICE
65 select VIDEOMODE_HELPERS
67 DRM panel driver for dumb panels that need at most a regulator and
68 a GPIO to be powered up. Optionally a backlight can be attached so
69 that it can be automatically turned off when the panel goes into a
72 config DRM_PANEL_ELIDA_KD35T133
73 tristate "Elida KD35T133 panel driver"
75 depends on DRM_MIPI_DSI
76 depends on BACKLIGHT_CLASS_DEVICE
78 Say Y here if you want to enable support for the Elida
79 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
82 config DRM_PANEL_FEIXIN_K101_IM2BA02
83 tristate "Feixin K101 IM2BA02 panel"
85 depends on DRM_MIPI_DSI
86 depends on BACKLIGHT_CLASS_DEVICE
88 Say Y here if you want to enable support for the Feixin K101 IM2BA02
89 4-lane 800x1280 MIPI DSI panel.
91 config DRM_PANEL_FEIYANG_FY07024DI26A30D
92 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
94 depends on DRM_MIPI_DSI
95 depends on BACKLIGHT_CLASS_DEVICE
97 Say Y if you want to enable support for panels based on the
98 Feiyang FY07024DI26A30-D MIPI-DSI interface.
100 config DRM_PANEL_ILITEK_IL9322
101 tristate "Ilitek ILI9322 320x240 QVGA panels"
105 Say Y here if you want to enable support for Ilitek IL9322
106 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
108 config DRM_PANEL_ILITEK_ILI9881C
109 tristate "Ilitek ILI9881C-based panels"
111 depends on DRM_MIPI_DSI
112 depends on BACKLIGHT_CLASS_DEVICE
114 Say Y if you want to enable support for panels based on the
115 Ilitek ILI9881c controller.
117 config DRM_PANEL_INNOLUX_P079ZCA
118 tristate "Innolux P079ZCA panel"
120 depends on DRM_MIPI_DSI
121 depends on BACKLIGHT_CLASS_DEVICE
123 Say Y here if you want to enable support for Innolux P079ZCA
124 TFT-LCD modules. The panel has a 1024x768 resolution and uses
125 24 bit RGB per pixel. It provides a MIPI DSI interface to
126 the host and has a built-in LED backlight.
128 config DRM_PANEL_JDI_LT070ME05000
129 tristate "JDI LT070ME05000 WUXGA DSI panel"
131 depends on DRM_MIPI_DSI
132 depends on BACKLIGHT_CLASS_DEVICE
134 Say Y here if you want to enable support for JDI DSI video mode
135 panel as found in Google Nexus 7 (2013) devices.
136 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
139 config DRM_PANEL_KINGDISPLAY_KD097D04
140 tristate "Kingdisplay kd097d04 panel"
142 depends on DRM_MIPI_DSI
143 depends on BACKLIGHT_CLASS_DEVICE
145 Say Y here if you want to enable support for Kingdisplay kd097d04
146 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
147 24 bit RGB per pixel. It provides a MIPI DSI interface to
148 the host and has a built-in LED backlight.
150 config DRM_PANEL_LEADTEK_LTK050H3146W
151 tristate "Leadtek LTK050H3146W panel"
153 depends on DRM_MIPI_DSI
154 depends on BACKLIGHT_CLASS_DEVICE
156 Say Y here if you want to enable support for Leadtek LTK050H3146W
157 TFT-LCD modules. The panel has a 720x1280 resolution and uses
158 24 bit RGB per pixel. It provides a MIPI DSI interface to
159 the host and has a built-in LED backlight.
161 config DRM_PANEL_LEADTEK_LTK500HD1829
162 tristate "Leadtek LTK500HD1829 panel"
164 depends on DRM_MIPI_DSI
165 depends on BACKLIGHT_CLASS_DEVICE
167 Say Y here if you want to enable support for Kingdisplay kd097d04
168 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
169 24 bit RGB per pixel. It provides a MIPI DSI interface to
170 the host and has a built-in LED backlight.
172 config DRM_PANEL_SAMSUNG_LD9040
173 tristate "Samsung LD9040 RGB/SPI panel"
175 select VIDEOMODE_HELPERS
177 config DRM_PANEL_LG_LB035Q02
178 tristate "LG LB035Q024573 RGB panel"
179 depends on GPIOLIB && OF && SPI
181 Say Y here if you want to enable support for the LB035Q02 RGB panel
182 (found on the Gumstix Overo Palo35 board). To compile this driver as
183 a module, choose M here.
185 config DRM_PANEL_LG_LG4573
186 tristate "LG4573 RGB/SPI panel"
188 select VIDEOMODE_HELPERS
190 Say Y here if you want to enable support for LG4573 RGB panel.
191 To compile this driver as a module, choose M here.
193 config DRM_PANEL_NEC_NL8048HL11
194 tristate "NEC NL8048HL11 RGB panel"
195 depends on GPIOLIB && OF && SPI
197 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
198 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
199 as a module, choose M here.
201 config DRM_PANEL_NOVATEK_NT35510
202 tristate "Novatek NT35510 RGB panel driver"
204 depends on DRM_MIPI_DSI
205 depends on BACKLIGHT_CLASS_DEVICE
207 Say Y here if you want to enable support for the panels built
208 around the Novatek NT35510 display controller, such as some
211 config DRM_PANEL_NOVATEK_NT39016
212 tristate "Novatek NT39016 RGB/SPI panel"
214 depends on BACKLIGHT_CLASS_DEVICE
217 Say Y here if you want to enable support for the panels built
218 around the Novatek NT39016 display controller.
220 config DRM_PANEL_MANTIX_MLAF057WE51
221 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
223 depends on DRM_MIPI_DSI
224 depends on BACKLIGHT_CLASS_DEVICE
226 Say Y here if you want to enable support for the Mantix
227 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
228 has a resolution of 720x1440 pixels, a built in backlight and touch
231 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
232 tristate "Olimex LCD-OLinuXino panel"
235 depends on BACKLIGHT_CLASS_DEVICE
237 The panel is used with different sizes LCDs, from 480x272 to
238 1280x800, and 24 bit per pixel.
240 Say Y here if you want to enable support for Olimex Ltd.
243 config DRM_PANEL_ORISETECH_OTM8009A
244 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
246 depends on DRM_MIPI_DSI
247 depends on BACKLIGHT_CLASS_DEVICE
249 Say Y here if you want to enable support for Orise Technology
250 otm8009a 480x800 dsi 2dl panel.
252 config DRM_PANEL_OSD_OSD101T2587_53TS
253 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
255 depends on DRM_MIPI_DSI
256 depends on BACKLIGHT_CLASS_DEVICE
258 Say Y here if you want to enable support for One Stop Displays
259 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
261 config DRM_PANEL_PANASONIC_VVX10F034N00
262 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
264 depends on DRM_MIPI_DSI
265 depends on BACKLIGHT_CLASS_DEVICE
267 Say Y here if you want to enable support for Panasonic VVX10F034N00
268 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
271 config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
272 tristate "Raspberry Pi 7-inch touchscreen panel"
273 depends on DRM_MIPI_DSI
275 Say Y here if you want to enable support for the Raspberry
276 Pi 7" Touchscreen. To compile this driver as a module,
279 config DRM_PANEL_RAYDIUM_RM67191
280 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
282 depends on DRM_MIPI_DSI
283 depends on BACKLIGHT_CLASS_DEVICE
285 Say Y here if you want to enable support for Raydium RM67191 FHD
286 (1080x1920) DSI panel.
288 config DRM_PANEL_RAYDIUM_RM68200
289 tristate "Raydium RM68200 720x1280 DSI video mode panel"
291 depends on DRM_MIPI_DSI
292 depends on BACKLIGHT_CLASS_DEVICE
294 Say Y here if you want to enable support for Raydium RM68200
295 720x1280 DSI video mode panel.
297 config DRM_PANEL_RONBO_RB070D30
298 tristate "Ronbo Electronics RB070D30 panel"
300 depends on DRM_MIPI_DSI
301 depends on BACKLIGHT_CLASS_DEVICE
303 Say Y here if you want to enable support for Ronbo Electronics
304 RB070D30 1024x600 DSI panel.
306 config DRM_PANEL_SAMSUNG_S6D16D0
307 tristate "Samsung S6D16D0 DSI video mode panel"
309 depends on DRM_MIPI_DSI
310 select VIDEOMODE_HELPERS
312 config DRM_PANEL_SAMSUNG_S6E3HA2
313 tristate "Samsung S6E3HA2 DSI video mode panel"
315 depends on DRM_MIPI_DSI
316 depends on BACKLIGHT_CLASS_DEVICE
317 select VIDEOMODE_HELPERS
319 config DRM_PANEL_SAMSUNG_S6E63J0X03
320 tristate "Samsung S6E63J0X03 DSI command mode panel"
322 depends on DRM_MIPI_DSI
323 depends on BACKLIGHT_CLASS_DEVICE
324 select VIDEOMODE_HELPERS
326 config DRM_PANEL_SAMSUNG_S6E63M0
327 tristate "Samsung S6E63M0 RGB/SPI panel"
330 depends on BACKLIGHT_CLASS_DEVICE
332 Say Y here if you want to enable support for Samsung S6E63M0
335 config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
336 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
339 select VIDEOMODE_HELPERS
341 config DRM_PANEL_SAMSUNG_S6E8AA0
342 tristate "Samsung S6E8AA0 DSI video mode panel"
345 select VIDEOMODE_HELPERS
347 config DRM_PANEL_SEIKO_43WVF1G
348 tristate "Seiko 43WVF1G panel"
350 depends on BACKLIGHT_CLASS_DEVICE
351 select VIDEOMODE_HELPERS
353 Say Y here if you want to enable support for the Seiko
354 43WVF1G controller for 800x480 LCD panels
356 config DRM_PANEL_SHARP_LQ101R1SX01
357 tristate "Sharp LQ101R1SX01 panel"
359 depends on DRM_MIPI_DSI
360 depends on BACKLIGHT_CLASS_DEVICE
362 Say Y here if you want to enable support for Sharp LQ101R1SX01
363 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
364 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
365 the host and has a built-in LED backlight.
367 To compile this driver as a module, choose M here: the module
368 will be called panel-sharp-lq101r1sx01.
370 config DRM_PANEL_SHARP_LS037V7DW01
371 tristate "Sharp LS037V7DW01 VGA LCD panel"
372 depends on GPIOLIB && OF && REGULATOR
374 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
375 (480x640) LCD panel (found on the TI SDP3430 board).
377 config DRM_PANEL_SHARP_LS043T1LE01
378 tristate "Sharp LS043T1LE01 qHD video mode panel"
380 depends on DRM_MIPI_DSI
381 depends on BACKLIGHT_CLASS_DEVICE
383 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
384 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
386 config DRM_PANEL_SITRONIX_ST7701
387 tristate "Sitronix ST7701 panel driver"
389 depends on DRM_MIPI_DSI
390 depends on BACKLIGHT_CLASS_DEVICE
392 Say Y here if you want to enable support for the Sitronix
393 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
396 config DRM_PANEL_SITRONIX_ST7703
397 tristate "Sitronix ST7703 based MIPI touchscreen panels"
399 depends on DRM_MIPI_DSI
400 depends on BACKLIGHT_CLASS_DEVICE
402 Say Y here if you want to enable support for Sitronix ST7703 based
403 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
404 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
405 in backlight and touch controller.
406 Touch input support is provided by the goodix driver and needs to be
409 config DRM_PANEL_SITRONIX_ST7789V
410 tristate "Sitronix ST7789V panel"
412 depends on BACKLIGHT_CLASS_DEVICE
414 Say Y here if you want to enable support for the Sitronix
415 ST7789V controller for 240x320 LCD panels
417 config DRM_PANEL_SONY_ACX424AKP
418 tristate "Sony ACX424AKP DSI command mode panel"
420 depends on DRM_MIPI_DSI
421 depends on BACKLIGHT_CLASS_DEVICE
422 select VIDEOMODE_HELPERS
424 Say Y here if you want to enable the Sony ACX424 display
425 panel. This panel supports DSI in both command and video
428 config DRM_PANEL_SONY_ACX565AKM
429 tristate "Sony ACX565AKM panel"
430 depends on GPIOLIB && OF && SPI
431 depends on BACKLIGHT_CLASS_DEVICE
433 Say Y here if you want to enable support for the Sony ACX565AKM
434 800x600 3.5" panel (found on the Nokia N900).
436 config DRM_PANEL_TPO_TD028TTEC1
437 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
439 depends on BACKLIGHT_CLASS_DEVICE
441 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
442 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
444 config DRM_PANEL_TPO_TD043MTEA1
445 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
446 depends on GPIOLIB && OF && REGULATOR && SPI
448 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
449 4.3" panel (found on the OMAP3 Pandora board).
451 config DRM_PANEL_TPO_TPG110
452 tristate "TPO TPG 800x400 panel"
453 depends on OF && SPI && GPIOLIB
454 depends on BACKLIGHT_CLASS_DEVICE
456 Say Y here if you want to enable support for TPO TPG110
457 400CH LTPS TFT LCD Single Chip Digital Driver for up to
460 config DRM_PANEL_TRULY_NT35597_WQXGA
461 tristate "Truly WQXGA"
463 depends on DRM_MIPI_DSI
465 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
468 config DRM_PANEL_VISIONOX_RM69299
469 tristate "Visionox RM69299"
471 depends on DRM_MIPI_DSI
473 Say Y here if you want to enable support for Visionox
474 RM69299 DSI Video Mode panel.
476 config DRM_PANEL_XINPENG_XPP055C272
477 tristate "Xinpeng XPP055C272 panel driver"
479 depends on DRM_MIPI_DSI
480 depends on BACKLIGHT_CLASS_DEVICE
482 Say Y here if you want to enable support for the Xinpeng
483 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI