drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c

   1 /*
   2  * Copyright (C) 2014 NVIDIA Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 #include <linux/backlight.h>
  10 #include <linux/gpio/consumer.h>
  11 #include <linux/module.h>
  12 #include <linux/of.h>
  13 #include <linux/regulator/consumer.h>
  14
  15 #include <drm/drmP.h>
  16 #include <drm/drm_crtc.h>
  17 #include <drm/drm_mipi_dsi.h>
  18 #include <drm/drm_panel.h>
  19
  20 #include <video/mipi_display.h>
  21
  22 struct sharp_panel {
  23         struct drm_panel base;
  24         /* the datasheet refers to them as DSI-LINK1 and DSI-LINK2 */
  25         struct mipi_dsi_device *link1;
  26         struct mipi_dsi_device *link2;
  27
  28         struct backlight_device *backlight;
  29         struct regulator *supply;
  30
  31         bool prepared;
  32         bool enabled;
  33
  34         const struct drm_display_mode *mode;
  35 };
  36
  37 static inline struct sharp_panel *to_sharp_panel(struct drm_panel *panel)
  38 {
  39         return container_of(panel, struct sharp_panel, base);
  40 }
  41
  42 static void sharp_wait_frames(struct sharp_panel *sharp, unsigned int frames)
  43 {
  44         unsigned int refresh = drm_mode_vrefresh(sharp->mode);
  45
  46         if (WARN_ON(frames > refresh))
  47                 return;
  48
  49         msleep(1000 / (refresh / frames));
  50 }
  51
  52 static int sharp_panel_write(struct sharp_panel *sharp, u16 offset, u8 value)
  53 {
  54         u8 payload[3] = { offset >> 8, offset & 0xff, value };
  55         struct mipi_dsi_device *dsi = sharp->link1;
  56         ssize_t err;
  57
  58         err = mipi_dsi_generic_write(dsi, payload, sizeof(payload));
  59         if (err < 0) {
  60                 dev_err(&dsi->dev, "failed to write %02x to %04x: %zd\n",
  61                         value, offset, err);
  62                 return err;
  63         }
  64
  65         err = mipi_dsi_dcs_nop(dsi);
  66         if (err < 0) {
  67                 dev_err(&dsi->dev, "failed to send DCS nop: %zd\n", err);
  68                 return err;
  69         }
  70
  71         usleep_range(10, 20);
  72
  73         return 0;
  74 }
  75
  76 static __maybe_unused int sharp_panel_read(struct sharp_panel *sharp,
  77                                            u16 offset, u8 *value)
  78 {
  79         ssize_t err;
  80
  81         cpu_to_be16s(&offset);
  82
  83         err = mipi_dsi_generic_read(sharp->link1, &offset, sizeof(offset),
  84                                     value, sizeof(*value));
  85         if (err < 0)
  86                 dev_err(&sharp->link1->dev, "failed to read from %04x: %zd\n",
  87                         offset, err);
  88
  89         return err;
  90 }
  91
  92 static int sharp_panel_disable(struct drm_panel *panel)
  93 {
  94         struct sharp_panel *sharp = to_sharp_panel(panel);
  95
  96         if (!sharp->enabled)
  97                 return 0;
  98
  99         if (sharp->backlight) {
 100                 sharp->backlight->props.power = FB_BLANK_POWERDOWN;
 101                 backlight_update_status(sharp->backlight);
 102         }
 103
 104         sharp->enabled = false;
 105
 106         return 0;
 107 }
 108
 109 static int sharp_panel_unprepare(struct drm_panel *panel)
 110 {
 111         struct sharp_panel *sharp = to_sharp_panel(panel);
 112         int err;
 113
 114         if (!sharp->prepared)
 115                 return 0;
 116
 117         sharp_wait_frames(sharp, 4);
 118
 119         err = mipi_dsi_dcs_set_display_off(sharp->link1);
 120         if (err < 0)
 121                 dev_err(panel->dev, "failed to set display off: %d\n", err);
 122
 123         err = mipi_dsi_dcs_enter_sleep_mode(sharp->link1);
 124         if (err < 0)
 125                 dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
 126
 127         msleep(120);
 128
 129         regulator_disable(sharp->supply);
 130
 131         sharp->prepared = false;
 132
 133         return 0;
 134 }
 135
 136 static int sharp_setup_symmetrical_split(struct mipi_dsi_device *left,
 137                                          struct mipi_dsi_device *right,
 138                                          const struct drm_display_mode *mode)
 139 {
 140         int err;
 141
 142         err = mipi_dsi_dcs_set_column_address(left, 0, mode->hdisplay / 2 - 1);
 143         if (err < 0) {
 144                 dev_err(&left->dev, "failed to set column address: %d\n", err);
 145                 return err;
 146         }
 147
 148         err = mipi_dsi_dcs_set_page_address(left, 0, mode->vdisplay - 1);
 149         if (err < 0) {
 150                 dev_err(&left->dev, "failed to set page address: %d\n", err);
 151                 return err;
 152         }
 153
 154         err = mipi_dsi_dcs_set_column_address(right, mode->hdisplay / 2,
 155                                               mode->hdisplay - 1);
 156         if (err < 0) {
 157                 dev_err(&right->dev, "failed to set column address: %d\n", err);
 158                 return err;
 159         }
 160
 161         err = mipi_dsi_dcs_set_page_address(right, 0, mode->vdisplay - 1);
 162         if (err < 0) {
 163                 dev_err(&right->dev, "failed to set page address: %d\n", err);
 164                 return err;
 165         }
 166
 167         return 0;
 168 }
 169
 170 static int sharp_panel_prepare(struct drm_panel *panel)
 171 {
 172         struct sharp_panel *sharp = to_sharp_panel(panel);
 173         u8 format = MIPI_DCS_PIXEL_FMT_24BIT;
 174         int err;
 175
 176         if (sharp->prepared)
 177                 return 0;
 178
 179         err = regulator_enable(sharp->supply);
 180         if (err < 0)
 181                 return err;
 182
 183         /*
 184          * According to the datasheet, the panel needs around 10 ms to fully
 185          * power up. At least another 120 ms is required before exiting sleep
 186          * mode to make sure the panel is ready. Throw in another 20 ms for
 187          * good measure.
 188          */
 189         msleep(150);
 190
 191         err = mipi_dsi_dcs_exit_sleep_mode(sharp->link1);
 192         if (err < 0) {
 193                 dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
 194                 goto poweroff;
 195         }
 196
 197         /*
 198          * The MIPI DCS specification mandates this delay only between the
 199          * exit_sleep_mode and enter_sleep_mode commands, so it isn't strictly
 200          * necessary here.
 201          */
 202         /*
 203         msleep(120);
 204         */
 205
 206         /* set left-right mode */
 207         err = sharp_panel_write(sharp, 0x1000, 0x2a);
 208         if (err < 0) {
 209                 dev_err(panel->dev, "failed to set left-right mode: %d\n", err);
 210                 goto poweroff;
 211         }
 212
 213         /* enable command mode */
 214         err = sharp_panel_write(sharp, 0x1001, 0x01);
 215         if (err < 0) {
 216                 dev_err(panel->dev, "failed to enable command mode: %d\n", err);
 217                 goto poweroff;
 218         }
 219
 220         err = mipi_dsi_dcs_set_pixel_format(sharp->link1, format);
 221         if (err < 0) {
 222                 dev_err(panel->dev, "failed to set pixel format: %d\n", err);
 223                 goto poweroff;
 224         }
 225
 226         /*
 227          * TODO: The device supports both left-right and even-odd split
 228          * configurations, but this driver currently supports only the left-
 229          * right split. To support a different mode a mechanism needs to be
 230          * put in place to communicate the configuration back to the DSI host
 231          * controller.
 232          */
 233         err = sharp_setup_symmetrical_split(sharp->link1, sharp->link2,
 234                                             sharp->mode);
 235         if (err < 0) {
 236                 dev_err(panel->dev, "failed to set up symmetrical split: %d\n",
 237                         err);
 238                 goto poweroff;
 239         }
 240
 241         err = mipi_dsi_dcs_set_display_on(sharp->link1);
 242         if (err < 0) {
 243                 dev_err(panel->dev, "failed to set display on: %d\n", err);
 244                 goto poweroff;
 245         }
 246
 247         sharp->prepared = true;
 248
 249         /* wait for 6 frames before continuing */
 250         sharp_wait_frames(sharp, 6);
 251
 252         return 0;
 253
 254 poweroff:
 255         regulator_disable(sharp->supply);
 256         return err;
 257 }
 258
 259 static int sharp_panel_enable(struct drm_panel *panel)
 260 {
 261         struct sharp_panel *sharp = to_sharp_panel(panel);
 262
 263         if (sharp->enabled)
 264                 return 0;
 265
 266         if (sharp->backlight) {
 267                 sharp->backlight->props.power = FB_BLANK_UNBLANK;
 268                 backlight_update_status(sharp->backlight);
 269         }
 270
 271         sharp->enabled = true;
 272
 273         return 0;
 274 }
 275
 276 static const struct drm_display_mode default_mode = {
 277         .clock = 278000,
 278         .hdisplay = 2560,
 279         .hsync_start = 2560 + 128,
 280         .hsync_end = 2560 + 128 + 64,
 281         .htotal = 2560 + 128 + 64 + 64,
 282         .vdisplay = 1600,
 283         .vsync_start = 1600 + 4,
 284         .vsync_end = 1600 + 4 + 8,
 285         .vtotal = 1600 + 4 + 8 + 32,
 286         .vrefresh = 60,
 287 };
 288
 289 static int sharp_panel_get_modes(struct drm_panel *panel)
 290 {
 291         struct drm_display_mode *mode;
 292
 293         mode = drm_mode_duplicate(panel->drm, &default_mode);
 294         if (!mode) {
 295                 dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
 296                         default_mode.hdisplay, default_mode.vdisplay,
 297                         default_mode.vrefresh);
 298                 return -ENOMEM;
 299         }
 300
 301         drm_mode_set_name(mode);
 302
 303         drm_mode_probed_add(panel->connector, mode);
 304
 305         panel->connector->display_info.width_mm = 217;
 306         panel->connector->display_info.height_mm = 136;
 307
 308         return 1;
 309 }
 310
 311 static const struct drm_panel_funcs sharp_panel_funcs = {
 312         .disable = sharp_panel_disable,
 313         .unprepare = sharp_panel_unprepare,
 314         .prepare = sharp_panel_prepare,
 315         .enable = sharp_panel_enable,
 316         .get_modes = sharp_panel_get_modes,
 317 };
 318
 319 static const struct of_device_id sharp_of_match[] = {
 320         { .compatible = "sharp,lq101r1sx01", },
 321         { }
 322 };
 323 MODULE_DEVICE_TABLE(of, sharp_of_match);
 324
 325 static int sharp_panel_add(struct sharp_panel *sharp)
 326 {
 327         struct device_node *np;
 328         int err;
 329
 330         sharp->mode = &default_mode;
 331
 332         sharp->supply = devm_regulator_get(&sharp->link1->dev, "power");
 333         if (IS_ERR(sharp->supply))
 334                 return PTR_ERR(sharp->supply);
 335
 336         np = of_parse_phandle(sharp->link1->dev.of_node, "backlight", 0);
 337         if (np) {
 338                 sharp->backlight = of_find_backlight_by_node(np);
 339                 of_node_put(np);
 340
 341                 if (!sharp->backlight)
 342                         return -EPROBE_DEFER;
 343         }
 344
 345         drm_panel_init(&sharp->base);
 346         sharp->base.funcs = &sharp_panel_funcs;
 347         sharp->base.dev = &sharp->link1->dev;
 348
 349         err = drm_panel_add(&sharp->base);
 350         if (err < 0)
 351                 goto put_backlight;
 352
 353         return 0;
 354
 355 put_backlight:
 356         if (sharp->backlight)
 357                 put_device(&sharp->backlight->dev);
 358
 359         return err;
 360 }
 361
 362 static void sharp_panel_del(struct sharp_panel *sharp)
 363 {
 364         if (sharp->base.dev)
 365                 drm_panel_remove(&sharp->base);
 366
 367         if (sharp->backlight)
 368                 put_device(&sharp->backlight->dev);
 369
 370         if (sharp->link2)
 371                 put_device(&sharp->link2->dev);
 372 }
 373
 374 static int sharp_panel_probe(struct mipi_dsi_device *dsi)
 375 {
 376         struct mipi_dsi_device *secondary = NULL;
 377         struct sharp_panel *sharp;
 378         struct device_node *np;
 379         int err;
 380
 381         dsi->lanes = 4;
 382         dsi->format = MIPI_DSI_FMT_RGB888;
 383         dsi->mode_flags = MIPI_DSI_MODE_LPM;
 384
 385         /* Find DSI-LINK1 */
 386         np = of_parse_phandle(dsi->dev.of_node, "link2", 0);
 387         if (np) {
 388                 secondary = of_find_mipi_dsi_device_by_node(np);
 389                 of_node_put(np);
 390
 391                 if (!secondary)
 392                         return -EPROBE_DEFER;
 393         }
 394
 395         /* register a panel for only the DSI-LINK1 interface */
 396         if (secondary) {
 397                 sharp = devm_kzalloc(&dsi->dev, sizeof(*sharp), GFP_KERNEL);
 398                 if (!sharp) {
 399                         put_device(&secondary->dev);
 400                         return -ENOMEM;
 401                 }
 402
 403                 mipi_dsi_set_drvdata(dsi, sharp);
 404
 405                 sharp->link2 = secondary;
 406                 sharp->link1 = dsi;
 407
 408                 err = sharp_panel_add(sharp);
 409                 if (err < 0) {
 410                         put_device(&secondary->dev);
 411                         return err;
 412                 }
 413         }
 414
 415         err = mipi_dsi_attach(dsi);
 416         if (err < 0) {
 417                 if (secondary)
 418                         sharp_panel_del(sharp);
 419
 420                 return err;
 421         }
 422
 423         return 0;
 424 }
 425
 426 static int sharp_panel_remove(struct mipi_dsi_device *dsi)
 427 {
 428         struct sharp_panel *sharp = mipi_dsi_get_drvdata(dsi);
 429         int err;
 430
 431         /* only detach from host for the DSI-LINK2 interface */
 432         if (!sharp) {
 433                 mipi_dsi_detach(dsi);
 434                 return 0;
 435         }
 436
 437         err = sharp_panel_disable(&sharp->base);
 438         if (err < 0)
 439                 dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
 440
 441         err = mipi_dsi_detach(dsi);
 442         if (err < 0)
 443                 dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
 444
 445         drm_panel_detach(&sharp->base);
 446         sharp_panel_del(sharp);
 447
 448         return 0;
 449 }
 450
 451 static void sharp_panel_shutdown(struct mipi_dsi_device *dsi)
 452 {
 453         struct sharp_panel *sharp = mipi_dsi_get_drvdata(dsi);
 454
 455         /* nothing to do for DSI-LINK2 */
 456         if (!sharp)
 457                 return;
 458
 459         sharp_panel_disable(&sharp->base);
 460 }
 461
 462 static struct mipi_dsi_driver sharp_panel_driver = {
 463         .driver = {
 464                 .name = "panel-sharp-lq101r1sx01",
 465                 .of_match_table = sharp_of_match,
 466         },
 467         .probe = sharp_panel_probe,
 468         .remove = sharp_panel_remove,
 469         .shutdown = sharp_panel_shutdown,
 470 };
 471 module_mipi_dsi_driver(sharp_panel_driver);
 472
 473 MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
 474 MODULE_DESCRIPTION("Sharp LQ101R1SX01 panel driver");
 475 MODULE_LICENSE("GPL v2");