]> git.proxmox.com Git - mirror_ubuntu-focal-kernel.git/blob - drivers/gpu/drm/rockchip/dw-mipi-dsi.c
ASoC: tlv320aic31xx: Reset registers during power up
[mirror_ubuntu-focal-kernel.git] / drivers / gpu / drm / rockchip / dw-mipi-dsi.c
1 /*
2 * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 */
9 #include <linux/clk.h>
10 #include <linux/component.h>
11 #include <linux/iopoll.h>
12 #include <linux/math64.h>
13 #include <linux/module.h>
14 #include <linux/of_device.h>
15 #include <linux/pm_runtime.h>
16 #include <linux/regmap.h>
17 #include <linux/reset.h>
18 #include <linux/mfd/syscon.h>
19 #include <drm/drm_atomic_helper.h>
20 #include <drm/drm_crtc.h>
21 #include <drm/drm_crtc_helper.h>
22 #include <drm/drm_mipi_dsi.h>
23 #include <drm/drm_of.h>
24 #include <drm/drm_panel.h>
25 #include <drm/drmP.h>
26 #include <video/mipi_display.h>
27
28 #include "rockchip_drm_drv.h"
29 #include "rockchip_drm_vop.h"
30
31 #define DRIVER_NAME "dw-mipi-dsi"
32
33 #define RK3288_GRF_SOC_CON6 0x025c
34 #define RK3288_DSI0_SEL_VOP_LIT BIT(6)
35 #define RK3288_DSI1_SEL_VOP_LIT BIT(9)
36
37 #define RK3399_GRF_SOC_CON20 0x6250
38 #define RK3399_DSI0_SEL_VOP_LIT BIT(0)
39 #define RK3399_DSI1_SEL_VOP_LIT BIT(4)
40
41 /* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */
42 #define RK3399_GRF_SOC_CON22 0x6258
43 #define RK3399_GRF_DSI_MODE 0xffff0000
44
45 #define DSI_VERSION 0x00
46 #define DSI_PWR_UP 0x04
47 #define RESET 0
48 #define POWERUP BIT(0)
49
50 #define DSI_CLKMGR_CFG 0x08
51 #define TO_CLK_DIVIDSION(div) (((div) & 0xff) << 8)
52 #define TX_ESC_CLK_DIVIDSION(div) (((div) & 0xff) << 0)
53
54 #define DSI_DPI_VCID 0x0c
55 #define DPI_VID(vid) (((vid) & 0x3) << 0)
56
57 #define DSI_DPI_COLOR_CODING 0x10
58 #define EN18_LOOSELY BIT(8)
59 #define DPI_COLOR_CODING_16BIT_1 0x0
60 #define DPI_COLOR_CODING_16BIT_2 0x1
61 #define DPI_COLOR_CODING_16BIT_3 0x2
62 #define DPI_COLOR_CODING_18BIT_1 0x3
63 #define DPI_COLOR_CODING_18BIT_2 0x4
64 #define DPI_COLOR_CODING_24BIT 0x5
65
66 #define DSI_DPI_CFG_POL 0x14
67 #define COLORM_ACTIVE_LOW BIT(4)
68 #define SHUTD_ACTIVE_LOW BIT(3)
69 #define HSYNC_ACTIVE_LOW BIT(2)
70 #define VSYNC_ACTIVE_LOW BIT(1)
71 #define DATAEN_ACTIVE_LOW BIT(0)
72
73 #define DSI_DPI_LP_CMD_TIM 0x18
74 #define OUTVACT_LPCMD_TIME(p) (((p) & 0xff) << 16)
75 #define INVACT_LPCMD_TIME(p) ((p) & 0xff)
76
77 #define DSI_DBI_CFG 0x20
78 #define DSI_DBI_CMDSIZE 0x28
79
80 #define DSI_PCKHDL_CFG 0x2c
81 #define EN_CRC_RX BIT(4)
82 #define EN_ECC_RX BIT(3)
83 #define EN_BTA BIT(2)
84 #define EN_EOTP_RX BIT(1)
85 #define EN_EOTP_TX BIT(0)
86
87 #define DSI_MODE_CFG 0x34
88 #define ENABLE_VIDEO_MODE 0
89 #define ENABLE_CMD_MODE BIT(0)
90
91 #define DSI_VID_MODE_CFG 0x38
92 #define FRAME_BTA_ACK BIT(14)
93 #define ENABLE_LOW_POWER (0x3f << 8)
94 #define ENABLE_LOW_POWER_MASK (0x3f << 8)
95 #define VID_MODE_TYPE_NON_BURST_SYNC_PULSES 0x0
96 #define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS 0x1
97 #define VID_MODE_TYPE_BURST 0x2
98 #define VID_MODE_TYPE_MASK 0x3
99
100 #define DSI_VID_PKT_SIZE 0x3c
101 #define VID_PKT_SIZE(p) (((p) & 0x3fff) << 0)
102 #define VID_PKT_MAX_SIZE 0x3fff
103
104 #define DSI_VID_HSA_TIME 0x48
105 #define DSI_VID_HBP_TIME 0x4c
106 #define DSI_VID_HLINE_TIME 0x50
107 #define DSI_VID_VSA_LINES 0x54
108 #define DSI_VID_VBP_LINES 0x58
109 #define DSI_VID_VFP_LINES 0x5c
110 #define DSI_VID_VACTIVE_LINES 0x60
111 #define DSI_CMD_MODE_CFG 0x68
112 #define MAX_RD_PKT_SIZE_LP BIT(24)
113 #define DCS_LW_TX_LP BIT(19)
114 #define DCS_SR_0P_TX_LP BIT(18)
115 #define DCS_SW_1P_TX_LP BIT(17)
116 #define DCS_SW_0P_TX_LP BIT(16)
117 #define GEN_LW_TX_LP BIT(14)
118 #define GEN_SR_2P_TX_LP BIT(13)
119 #define GEN_SR_1P_TX_LP BIT(12)
120 #define GEN_SR_0P_TX_LP BIT(11)
121 #define GEN_SW_2P_TX_LP BIT(10)
122 #define GEN_SW_1P_TX_LP BIT(9)
123 #define GEN_SW_0P_TX_LP BIT(8)
124 #define EN_ACK_RQST BIT(1)
125 #define EN_TEAR_FX BIT(0)
126
127 #define CMD_MODE_ALL_LP (MAX_RD_PKT_SIZE_LP | \
128 DCS_LW_TX_LP | \
129 DCS_SR_0P_TX_LP | \
130 DCS_SW_1P_TX_LP | \
131 DCS_SW_0P_TX_LP | \
132 GEN_LW_TX_LP | \
133 GEN_SR_2P_TX_LP | \
134 GEN_SR_1P_TX_LP | \
135 GEN_SR_0P_TX_LP | \
136 GEN_SW_2P_TX_LP | \
137 GEN_SW_1P_TX_LP | \
138 GEN_SW_0P_TX_LP)
139
140 #define DSI_GEN_HDR 0x6c
141 #define GEN_HDATA(data) (((data) & 0xffff) << 8)
142 #define GEN_HDATA_MASK (0xffff << 8)
143 #define GEN_HTYPE(type) (((type) & 0xff) << 0)
144 #define GEN_HTYPE_MASK 0xff
145
146 #define DSI_GEN_PLD_DATA 0x70
147
148 #define DSI_CMD_PKT_STATUS 0x74
149 #define GEN_CMD_EMPTY BIT(0)
150 #define GEN_CMD_FULL BIT(1)
151 #define GEN_PLD_W_EMPTY BIT(2)
152 #define GEN_PLD_W_FULL BIT(3)
153 #define GEN_PLD_R_EMPTY BIT(4)
154 #define GEN_PLD_R_FULL BIT(5)
155 #define GEN_RD_CMD_BUSY BIT(6)
156
157 #define DSI_TO_CNT_CFG 0x78
158 #define HSTX_TO_CNT(p) (((p) & 0xffff) << 16)
159 #define LPRX_TO_CNT(p) ((p) & 0xffff)
160
161 #define DSI_BTA_TO_CNT 0x8c
162 #define DSI_LPCLK_CTRL 0x94
163 #define AUTO_CLKLANE_CTRL BIT(1)
164 #define PHY_TXREQUESTCLKHS BIT(0)
165
166 #define DSI_PHY_TMR_LPCLK_CFG 0x98
167 #define PHY_CLKHS2LP_TIME(lbcc) (((lbcc) & 0x3ff) << 16)
168 #define PHY_CLKLP2HS_TIME(lbcc) ((lbcc) & 0x3ff)
169
170 #define DSI_PHY_TMR_CFG 0x9c
171 #define PHY_HS2LP_TIME(lbcc) (((lbcc) & 0xff) << 24)
172 #define PHY_LP2HS_TIME(lbcc) (((lbcc) & 0xff) << 16)
173 #define MAX_RD_TIME(lbcc) ((lbcc) & 0x7fff)
174
175 #define DSI_PHY_RSTZ 0xa0
176 #define PHY_DISFORCEPLL 0
177 #define PHY_ENFORCEPLL BIT(3)
178 #define PHY_DISABLECLK 0
179 #define PHY_ENABLECLK BIT(2)
180 #define PHY_RSTZ 0
181 #define PHY_UNRSTZ BIT(1)
182 #define PHY_SHUTDOWNZ 0
183 #define PHY_UNSHUTDOWNZ BIT(0)
184
185 #define DSI_PHY_IF_CFG 0xa4
186 #define N_LANES(n) ((((n) - 1) & 0x3) << 0)
187 #define PHY_STOP_WAIT_TIME(cycle) (((cycle) & 0xff) << 8)
188
189 #define DSI_PHY_STATUS 0xb0
190 #define LOCK BIT(0)
191 #define STOP_STATE_CLK_LANE BIT(2)
192
193 #define DSI_PHY_TST_CTRL0 0xb4
194 #define PHY_TESTCLK BIT(1)
195 #define PHY_UNTESTCLK 0
196 #define PHY_TESTCLR BIT(0)
197 #define PHY_UNTESTCLR 0
198
199 #define DSI_PHY_TST_CTRL1 0xb8
200 #define PHY_TESTEN BIT(16)
201 #define PHY_UNTESTEN 0
202 #define PHY_TESTDOUT(n) (((n) & 0xff) << 8)
203 #define PHY_TESTDIN(n) (((n) & 0xff) << 0)
204
205 #define DSI_INT_ST0 0xbc
206 #define DSI_INT_ST1 0xc0
207 #define DSI_INT_MSK0 0xc4
208 #define DSI_INT_MSK1 0xc8
209
210 #define PHY_STATUS_TIMEOUT_US 10000
211 #define CMD_PKT_STATUS_TIMEOUT_US 20000
212
213 #define BYPASS_VCO_RANGE BIT(7)
214 #define VCO_RANGE_CON_SEL(val) (((val) & 0x7) << 3)
215 #define VCO_IN_CAP_CON_DEFAULT (0x0 << 1)
216 #define VCO_IN_CAP_CON_LOW (0x1 << 1)
217 #define VCO_IN_CAP_CON_HIGH (0x2 << 1)
218 #define REF_BIAS_CUR_SEL BIT(0)
219
220 #define CP_CURRENT_3MA BIT(3)
221 #define CP_PROGRAM_EN BIT(7)
222 #define LPF_PROGRAM_EN BIT(6)
223 #define LPF_RESISTORS_20_KOHM 0
224
225 #define HSFREQRANGE_SEL(val) (((val) & 0x3f) << 1)
226
227 #define INPUT_DIVIDER(val) (((val) - 1) & 0x7f)
228 #define LOW_PROGRAM_EN 0
229 #define HIGH_PROGRAM_EN BIT(7)
230 #define LOOP_DIV_LOW_SEL(val) (((val) - 1) & 0x1f)
231 #define LOOP_DIV_HIGH_SEL(val) ((((val) - 1) >> 5) & 0x1f)
232 #define PLL_LOOP_DIV_EN BIT(5)
233 #define PLL_INPUT_DIV_EN BIT(4)
234
235 #define POWER_CONTROL BIT(6)
236 #define INTERNAL_REG_CURRENT BIT(3)
237 #define BIAS_BLOCK_ON BIT(2)
238 #define BANDGAP_ON BIT(0)
239
240 #define TER_RESISTOR_HIGH BIT(7)
241 #define TER_RESISTOR_LOW 0
242 #define LEVEL_SHIFTERS_ON BIT(6)
243 #define TER_CAL_DONE BIT(5)
244 #define SETRD_MAX (0x7 << 2)
245 #define POWER_MANAGE BIT(1)
246 #define TER_RESISTORS_ON BIT(0)
247
248 #define BIASEXTR_SEL(val) ((val) & 0x7)
249 #define BANDGAP_SEL(val) ((val) & 0x7)
250 #define TLP_PROGRAM_EN BIT(7)
251 #define THS_PRE_PROGRAM_EN BIT(7)
252 #define THS_ZERO_PROGRAM_EN BIT(6)
253
254 #define DW_MIPI_NEEDS_PHY_CFG_CLK BIT(0)
255 #define DW_MIPI_NEEDS_GRF_CLK BIT(1)
256
257 enum {
258 BANDGAP_97_07,
259 BANDGAP_98_05,
260 BANDGAP_99_02,
261 BANDGAP_100_00,
262 BANDGAP_93_17,
263 BANDGAP_94_15,
264 BANDGAP_95_12,
265 BANDGAP_96_10,
266 };
267
268 enum {
269 BIASEXTR_87_1,
270 BIASEXTR_91_5,
271 BIASEXTR_95_9,
272 BIASEXTR_100,
273 BIASEXTR_105_94,
274 BIASEXTR_111_88,
275 BIASEXTR_118_8,
276 BIASEXTR_127_7,
277 };
278
279 struct dw_mipi_dsi_plat_data {
280 u32 dsi0_en_bit;
281 u32 dsi1_en_bit;
282 u32 grf_switch_reg;
283 u32 grf_dsi0_mode;
284 u32 grf_dsi0_mode_reg;
285 unsigned int flags;
286 unsigned int max_data_lanes;
287 };
288
289 struct dw_mipi_dsi {
290 struct drm_encoder encoder;
291 struct drm_connector connector;
292 struct mipi_dsi_host dsi_host;
293 struct drm_panel *panel;
294 struct device *dev;
295 struct regmap *grf_regmap;
296 void __iomem *base;
297
298 struct clk *grf_clk;
299 struct clk *pllref_clk;
300 struct clk *pclk;
301 struct clk *phy_cfg_clk;
302
303 int dpms_mode;
304 unsigned int lane_mbps; /* per lane */
305 u32 channel;
306 u32 lanes;
307 u32 format;
308 u16 input_div;
309 u16 feedback_div;
310 unsigned long mode_flags;
311
312 const struct dw_mipi_dsi_plat_data *pdata;
313 };
314
315 enum dw_mipi_dsi_mode {
316 DW_MIPI_DSI_CMD_MODE,
317 DW_MIPI_DSI_VID_MODE,
318 };
319
320 struct dphy_pll_testdin_map {
321 unsigned int max_mbps;
322 u8 testdin;
323 };
324
325 /* The table is based on 27MHz DPHY pll reference clock. */
326 static const struct dphy_pll_testdin_map dptdin_map[] = {
327 { 90, 0x00}, { 100, 0x10}, { 110, 0x20}, { 130, 0x01},
328 { 140, 0x11}, { 150, 0x21}, { 170, 0x02}, { 180, 0x12},
329 { 200, 0x22}, { 220, 0x03}, { 240, 0x13}, { 250, 0x23},
330 { 270, 0x04}, { 300, 0x14}, { 330, 0x05}, { 360, 0x15},
331 { 400, 0x25}, { 450, 0x06}, { 500, 0x16}, { 550, 0x07},
332 { 600, 0x17}, { 650, 0x08}, { 700, 0x18}, { 750, 0x09},
333 { 800, 0x19}, { 850, 0x29}, { 900, 0x39}, { 950, 0x0a},
334 {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
335 {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
336 {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
337 };
338
339 static int max_mbps_to_testdin(unsigned int max_mbps)
340 {
341 int i;
342
343 for (i = 0; i < ARRAY_SIZE(dptdin_map); i++)
344 if (dptdin_map[i].max_mbps > max_mbps)
345 return dptdin_map[i].testdin;
346
347 return -EINVAL;
348 }
349
350 /*
351 * The controller should generate 2 frames before
352 * preparing the peripheral.
353 */
354 static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
355 {
356 int refresh, two_frames;
357
358 refresh = drm_mode_vrefresh(mode);
359 two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
360 msleep(two_frames);
361 }
362
363 static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
364 {
365 return container_of(host, struct dw_mipi_dsi, dsi_host);
366 }
367
368 static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
369 {
370 return container_of(con, struct dw_mipi_dsi, connector);
371 }
372
373 static inline struct dw_mipi_dsi *encoder_to_dsi(struct drm_encoder *encoder)
374 {
375 return container_of(encoder, struct dw_mipi_dsi, encoder);
376 }
377
378 static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
379 {
380 writel(val, dsi->base + reg);
381 }
382
383 static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
384 {
385 return readl(dsi->base + reg);
386 }
387
388 static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi *dsi, u8 test_code,
389 u8 test_data)
390 {
391 /*
392 * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content
393 * is latched internally as the current test code. Test data is
394 * programmed internally by rising edge on TESTCLK.
395 */
396 dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
397
398 dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
399 PHY_TESTDIN(test_code));
400
401 dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
402
403 dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
404 PHY_TESTDIN(test_data));
405
406 dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
407 }
408
409 /**
410 * ns2bc - Nanoseconds to byte clock cycles
411 */
412 static inline unsigned int ns2bc(struct dw_mipi_dsi *dsi, int ns)
413 {
414 return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000);
415 }
416
417 /**
418 * ns2ui - Nanoseconds to UI time periods
419 */
420 static inline unsigned int ns2ui(struct dw_mipi_dsi *dsi, int ns)
421 {
422 return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000);
423 }
424
425 static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
426 {
427 int ret, testdin, vco, val;
428
429 vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
430
431 testdin = max_mbps_to_testdin(dsi->lane_mbps);
432 if (testdin < 0) {
433 DRM_DEV_ERROR(dsi->dev,
434 "failed to get testdin for %dmbps lane clock\n",
435 dsi->lane_mbps);
436 return testdin;
437 }
438
439 /* Start by clearing PHY state */
440 dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
441 dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
442 dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
443
444 ret = clk_prepare_enable(dsi->phy_cfg_clk);
445 if (ret) {
446 DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n");
447 return ret;
448 }
449
450 dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
451 VCO_RANGE_CON_SEL(vco) |
452 VCO_IN_CAP_CON_LOW |
453 REF_BIAS_CUR_SEL);
454
455 dw_mipi_dsi_phy_write(dsi, 0x11, CP_CURRENT_3MA);
456 dw_mipi_dsi_phy_write(dsi, 0x12, CP_PROGRAM_EN | LPF_PROGRAM_EN |
457 LPF_RESISTORS_20_KOHM);
458
459 dw_mipi_dsi_phy_write(dsi, 0x44, HSFREQRANGE_SEL(testdin));
460
461 dw_mipi_dsi_phy_write(dsi, 0x17, INPUT_DIVIDER(dsi->input_div));
462 dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_LOW_SEL(dsi->feedback_div) |
463 LOW_PROGRAM_EN);
464 dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
465 HIGH_PROGRAM_EN);
466 dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
467
468 dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN |
469 BIASEXTR_SEL(BIASEXTR_127_7));
470 dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN |
471 BANDGAP_SEL(BANDGAP_96_10));
472
473 dw_mipi_dsi_phy_write(dsi, 0x20, POWER_CONTROL | INTERNAL_REG_CURRENT |
474 BIAS_BLOCK_ON | BANDGAP_ON);
475
476 dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_LOW | TER_CAL_DONE |
477 SETRD_MAX | TER_RESISTORS_ON);
478 dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
479 SETRD_MAX | POWER_MANAGE |
480 TER_RESISTORS_ON);
481
482 dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500));
483 dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
484 dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
485 dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
486 dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100));
487 dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7));
488
489 dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500));
490 dw_mipi_dsi_phy_write(dsi, 0x71,
491 THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5));
492 dw_mipi_dsi_phy_write(dsi, 0x72,
493 THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2));
494 dw_mipi_dsi_phy_write(dsi, 0x73,
495 THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8));
496 dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100));
497
498 dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
499 PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
500
501 ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
502 val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US);
503 if (ret < 0) {
504 DRM_DEV_ERROR(dsi->dev, "failed to wait for phy lock state\n");
505 goto phy_init_end;
506 }
507
508 ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
509 val, val & STOP_STATE_CLK_LANE, 1000,
510 PHY_STATUS_TIMEOUT_US);
511 if (ret < 0)
512 DRM_DEV_ERROR(dsi->dev,
513 "failed to wait for phy clk lane stop state\n");
514
515 phy_init_end:
516 clk_disable_unprepare(dsi->phy_cfg_clk);
517
518 return ret;
519 }
520
521 static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi,
522 struct drm_display_mode *mode)
523 {
524 unsigned int i, pre;
525 unsigned long mpclk, pllref, tmp;
526 unsigned int m = 1, n = 1, target_mbps = 1000;
527 unsigned int max_mbps = dptdin_map[ARRAY_SIZE(dptdin_map) - 1].max_mbps;
528 int bpp;
529
530 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
531 if (bpp < 0) {
532 DRM_DEV_ERROR(dsi->dev,
533 "failed to get bpp for pixel format %d\n",
534 dsi->format);
535 return bpp;
536 }
537
538 mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
539 if (mpclk) {
540 /* take 1 / 0.8, since mbps must big than bandwidth of RGB */
541 tmp = mpclk * (bpp / dsi->lanes) * 10 / 8;
542 if (tmp < max_mbps)
543 target_mbps = tmp;
544 else
545 DRM_DEV_ERROR(dsi->dev,
546 "DPHY clock frequency is out of range\n");
547 }
548
549 pllref = DIV_ROUND_UP(clk_get_rate(dsi->pllref_clk), USEC_PER_SEC);
550 tmp = pllref;
551
552 /*
553 * The limits on the PLL divisor are:
554 *
555 * 5MHz <= (pllref / n) <= 40MHz
556 *
557 * we walk over these values in descreasing order so that if we hit
558 * an exact match for target_mbps it is more likely that "m" will be
559 * even.
560 *
561 * TODO: ensure that "m" is even after this loop.
562 */
563 for (i = pllref / 5; i > (pllref / 40); i--) {
564 pre = pllref / i;
565 if ((tmp > (target_mbps % pre)) && (target_mbps / pre < 512)) {
566 tmp = target_mbps % pre;
567 n = i;
568 m = target_mbps / pre;
569 }
570 if (tmp == 0)
571 break;
572 }
573
574 dsi->lane_mbps = pllref / n * m;
575 dsi->input_div = n;
576 dsi->feedback_div = m;
577
578 return 0;
579 }
580
581 static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
582 struct mipi_dsi_device *device)
583 {
584 struct dw_mipi_dsi *dsi = host_to_dsi(host);
585
586 if (device->lanes > dsi->pdata->max_data_lanes) {
587 DRM_DEV_ERROR(dsi->dev,
588 "the number of data lanes(%u) is too many\n",
589 device->lanes);
590 return -EINVAL;
591 }
592
593 dsi->lanes = device->lanes;
594 dsi->channel = device->channel;
595 dsi->format = device->format;
596 dsi->mode_flags = device->mode_flags;
597 dsi->panel = of_drm_find_panel(device->dev.of_node);
598 if (dsi->panel)
599 return drm_panel_attach(dsi->panel, &dsi->connector);
600
601 return -EINVAL;
602 }
603
604 static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
605 struct mipi_dsi_device *device)
606 {
607 struct dw_mipi_dsi *dsi = host_to_dsi(host);
608
609 drm_panel_detach(dsi->panel);
610
611 return 0;
612 }
613
614 static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
615 const struct mipi_dsi_msg *msg)
616 {
617 bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
618 u32 val = 0;
619
620 if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
621 val |= EN_ACK_RQST;
622 if (lpm)
623 val |= CMD_MODE_ALL_LP;
624
625 dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
626 dsi_write(dsi, DSI_CMD_MODE_CFG, val);
627 }
628
629 static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
630 {
631 int ret;
632 u32 val, mask;
633
634 ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
635 val, !(val & GEN_CMD_FULL), 1000,
636 CMD_PKT_STATUS_TIMEOUT_US);
637 if (ret < 0) {
638 DRM_DEV_ERROR(dsi->dev,
639 "failed to get available command FIFO\n");
640 return ret;
641 }
642
643 dsi_write(dsi, DSI_GEN_HDR, hdr_val);
644
645 mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
646 ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
647 val, (val & mask) == mask,
648 1000, CMD_PKT_STATUS_TIMEOUT_US);
649 if (ret < 0) {
650 DRM_DEV_ERROR(dsi->dev, "failed to write command FIFO\n");
651 return ret;
652 }
653
654 return 0;
655 }
656
657 static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
658 const struct mipi_dsi_msg *msg)
659 {
660 const u8 *tx_buf = msg->tx_buf;
661 u16 data = 0;
662 u32 val;
663
664 if (msg->tx_len > 0)
665 data |= tx_buf[0];
666 if (msg->tx_len > 1)
667 data |= tx_buf[1] << 8;
668
669 if (msg->tx_len > 2) {
670 DRM_DEV_ERROR(dsi->dev,
671 "too long tx buf length %zu for short write\n",
672 msg->tx_len);
673 return -EINVAL;
674 }
675
676 val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
677 return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
678 }
679
680 static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
681 const struct mipi_dsi_msg *msg)
682 {
683 const u8 *tx_buf = msg->tx_buf;
684 int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
685 u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
686 u32 remainder;
687 u32 val;
688
689 if (msg->tx_len < 3) {
690 DRM_DEV_ERROR(dsi->dev,
691 "wrong tx buf length %zu for long write\n",
692 msg->tx_len);
693 return -EINVAL;
694 }
695
696 while (DIV_ROUND_UP(len, pld_data_bytes)) {
697 if (len < pld_data_bytes) {
698 remainder = 0;
699 memcpy(&remainder, tx_buf, len);
700 dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
701 len = 0;
702 } else {
703 memcpy(&remainder, tx_buf, pld_data_bytes);
704 dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
705 tx_buf += pld_data_bytes;
706 len -= pld_data_bytes;
707 }
708
709 ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
710 val, !(val & GEN_PLD_W_FULL), 1000,
711 CMD_PKT_STATUS_TIMEOUT_US);
712 if (ret < 0) {
713 DRM_DEV_ERROR(dsi->dev,
714 "failed to get available write payload FIFO\n");
715 return ret;
716 }
717 }
718
719 return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
720 }
721
722 static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
723 const struct mipi_dsi_msg *msg)
724 {
725 struct dw_mipi_dsi *dsi = host_to_dsi(host);
726 int ret;
727
728 dw_mipi_message_config(dsi, msg);
729
730 switch (msg->type) {
731 case MIPI_DSI_DCS_SHORT_WRITE:
732 case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
733 case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
734 ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
735 break;
736 case MIPI_DSI_DCS_LONG_WRITE:
737 ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
738 break;
739 default:
740 DRM_DEV_ERROR(dsi->dev, "unsupported message type 0x%02x\n",
741 msg->type);
742 ret = -EINVAL;
743 }
744
745 return ret;
746 }
747
748 static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
749 .attach = dw_mipi_dsi_host_attach,
750 .detach = dw_mipi_dsi_host_detach,
751 .transfer = dw_mipi_dsi_host_transfer,
752 };
753
754 static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
755 {
756 u32 val;
757
758 val = ENABLE_LOW_POWER;
759
760 if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
761 val |= VID_MODE_TYPE_BURST;
762 else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
763 val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
764 else
765 val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
766
767 dsi_write(dsi, DSI_VID_MODE_CFG, val);
768 }
769
770 static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
771 enum dw_mipi_dsi_mode mode)
772 {
773 if (mode == DW_MIPI_DSI_CMD_MODE) {
774 dsi_write(dsi, DSI_PWR_UP, RESET);
775 dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
776 dsi_write(dsi, DSI_PWR_UP, POWERUP);
777 } else {
778 dsi_write(dsi, DSI_PWR_UP, RESET);
779 dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
780 dw_mipi_dsi_video_mode_config(dsi);
781 dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
782 dsi_write(dsi, DSI_PWR_UP, POWERUP);
783 }
784 }
785
786 static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
787 {
788 dsi_write(dsi, DSI_PWR_UP, RESET);
789 dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
790 }
791
792 static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
793 {
794 /*
795 * The maximum permitted escape clock is 20MHz and it is derived from
796 * lanebyteclk, which is running at "lane_mbps / 8". Thus we want:
797 *
798 * (lane_mbps >> 3) / esc_clk_division < 20
799 * which is:
800 * (lane_mbps >> 3) / 20 > esc_clk_division
801 */
802 u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
803
804 dsi_write(dsi, DSI_PWR_UP, RESET);
805 dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
806 | PHY_RSTZ | PHY_SHUTDOWNZ);
807 dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
808 TX_ESC_CLK_DIVIDSION(esc_clk_division));
809 }
810
811 static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
812 struct drm_display_mode *mode)
813 {
814 u32 val = 0, color = 0;
815
816 switch (dsi->format) {
817 case MIPI_DSI_FMT_RGB888:
818 color = DPI_COLOR_CODING_24BIT;
819 break;
820 case MIPI_DSI_FMT_RGB666:
821 color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
822 break;
823 case MIPI_DSI_FMT_RGB666_PACKED:
824 color = DPI_COLOR_CODING_18BIT_1;
825 break;
826 case MIPI_DSI_FMT_RGB565:
827 color = DPI_COLOR_CODING_16BIT_1;
828 break;
829 }
830
831 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
832 val |= VSYNC_ACTIVE_LOW;
833 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
834 val |= HSYNC_ACTIVE_LOW;
835
836 dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
837 dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
838 dsi_write(dsi, DSI_DPI_CFG_POL, val);
839 dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
840 | INVACT_LPCMD_TIME(4));
841 }
842
843 static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
844 {
845 dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
846 }
847
848 static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
849 struct drm_display_mode *mode)
850 {
851 dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
852 }
853
854 static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
855 {
856 dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
857 dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
858 dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
859 }
860
861 /* Get lane byte clock cycles. */
862 static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
863 struct drm_display_mode *mode,
864 u32 hcomponent)
865 {
866 u32 frac, lbcc;
867
868 lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
869
870 frac = lbcc % mode->clock;
871 lbcc = lbcc / mode->clock;
872 if (frac)
873 lbcc++;
874
875 return lbcc;
876 }
877
878 static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
879 struct drm_display_mode *mode)
880 {
881 u32 htotal, hsa, hbp, lbcc;
882
883 htotal = mode->htotal;
884 hsa = mode->hsync_end - mode->hsync_start;
885 hbp = mode->htotal - mode->hsync_end;
886
887 lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
888 dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
889
890 lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
891 dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
892
893 lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
894 dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
895 }
896
897 static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
898 struct drm_display_mode *mode)
899 {
900 u32 vactive, vsa, vfp, vbp;
901
902 vactive = mode->vdisplay;
903 vsa = mode->vsync_end - mode->vsync_start;
904 vfp = mode->vsync_start - mode->vdisplay;
905 vbp = mode->vtotal - mode->vsync_end;
906
907 dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
908 dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
909 dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
910 dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
911 }
912
913 static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
914 {
915 dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
916 | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
917
918 dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
919 | PHY_CLKLP2HS_TIME(0x40));
920 }
921
922 static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
923 {
924 dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
925 N_LANES(dsi->lanes));
926 }
927
928 static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
929 {
930 dsi_read(dsi, DSI_INT_ST0);
931 dsi_read(dsi, DSI_INT_ST1);
932 dsi_write(dsi, DSI_INT_MSK0, 0);
933 dsi_write(dsi, DSI_INT_MSK1, 0);
934 }
935
936 static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
937 {
938 struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
939
940 if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
941 return;
942
943 if (clk_prepare_enable(dsi->pclk)) {
944 DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n");
945 return;
946 }
947
948 drm_panel_disable(dsi->panel);
949
950 dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
951 drm_panel_unprepare(dsi->panel);
952
953 dw_mipi_dsi_disable(dsi);
954 pm_runtime_put(dsi->dev);
955 clk_disable_unprepare(dsi->pclk);
956 dsi->dpms_mode = DRM_MODE_DPMS_OFF;
957 }
958
959 static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
960 {
961 struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
962 struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
963 const struct dw_mipi_dsi_plat_data *pdata = dsi->pdata;
964 int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder);
965 u32 val;
966 int ret;
967
968 ret = dw_mipi_dsi_get_lane_bps(dsi, mode);
969 if (ret < 0)
970 return;
971
972 if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
973 return;
974
975 if (clk_prepare_enable(dsi->pclk)) {
976 DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n");
977 return;
978 }
979
980 pm_runtime_get_sync(dsi->dev);
981 dw_mipi_dsi_init(dsi);
982 dw_mipi_dsi_dpi_config(dsi, mode);
983 dw_mipi_dsi_packet_handler_config(dsi);
984 dw_mipi_dsi_video_mode_config(dsi);
985 dw_mipi_dsi_video_packet_config(dsi, mode);
986 dw_mipi_dsi_command_mode_config(dsi);
987 dw_mipi_dsi_line_timer_config(dsi, mode);
988 dw_mipi_dsi_vertical_timing_config(dsi, mode);
989 dw_mipi_dsi_dphy_timing_config(dsi);
990 dw_mipi_dsi_dphy_interface_config(dsi);
991 dw_mipi_dsi_clear_err(dsi);
992
993 /*
994 * For the RK3399, the clk of grf must be enabled before writing grf
995 * register. And for RK3288 or other soc, this grf_clk must be NULL,
996 * the clk_prepare_enable return true directly.
997 */
998 ret = clk_prepare_enable(dsi->grf_clk);
999 if (ret) {
1000 DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
1001 return;
1002 }
1003
1004 if (pdata->grf_dsi0_mode_reg)
1005 regmap_write(dsi->grf_regmap, pdata->grf_dsi0_mode_reg,
1006 pdata->grf_dsi0_mode);
1007
1008 dw_mipi_dsi_phy_init(dsi);
1009 dw_mipi_dsi_wait_for_two_frames(mode);
1010
1011 dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
1012 if (drm_panel_prepare(dsi->panel))
1013 DRM_DEV_ERROR(dsi->dev, "failed to prepare panel\n");
1014
1015 dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
1016 drm_panel_enable(dsi->panel);
1017
1018 clk_disable_unprepare(dsi->pclk);
1019
1020 if (mux)
1021 val = pdata->dsi0_en_bit | (pdata->dsi0_en_bit << 16);
1022 else
1023 val = pdata->dsi0_en_bit << 16;
1024
1025 regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val);
1026 DRM_DEV_DEBUG(dsi->dev,
1027 "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG");
1028 dsi->dpms_mode = DRM_MODE_DPMS_ON;
1029
1030 clk_disable_unprepare(dsi->grf_clk);
1031 }
1032
1033 static int
1034 dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder,
1035 struct drm_crtc_state *crtc_state,
1036 struct drm_connector_state *conn_state)
1037 {
1038 struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
1039 struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
1040
1041 switch (dsi->format) {
1042 case MIPI_DSI_FMT_RGB888:
1043 s->output_mode = ROCKCHIP_OUT_MODE_P888;
1044 break;
1045 case MIPI_DSI_FMT_RGB666:
1046 s->output_mode = ROCKCHIP_OUT_MODE_P666;
1047 break;
1048 case MIPI_DSI_FMT_RGB565:
1049 s->output_mode = ROCKCHIP_OUT_MODE_P565;
1050 break;
1051 default:
1052 WARN_ON(1);
1053 return -EINVAL;
1054 }
1055
1056 s->output_type = DRM_MODE_CONNECTOR_DSI;
1057
1058 return 0;
1059 }
1060
1061 static const struct drm_encoder_helper_funcs
1062 dw_mipi_dsi_encoder_helper_funcs = {
1063 .enable = dw_mipi_dsi_encoder_enable,
1064 .disable = dw_mipi_dsi_encoder_disable,
1065 .atomic_check = dw_mipi_dsi_encoder_atomic_check,
1066 };
1067
1068 static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = {
1069 .destroy = drm_encoder_cleanup,
1070 };
1071
1072 static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
1073 {
1074 struct dw_mipi_dsi *dsi = con_to_dsi(connector);
1075
1076 return drm_panel_get_modes(dsi->panel);
1077 }
1078
1079 static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
1080 .get_modes = dw_mipi_dsi_connector_get_modes,
1081 };
1082
1083 static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
1084 {
1085 drm_connector_unregister(connector);
1086 drm_connector_cleanup(connector);
1087 }
1088
1089 static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
1090 .fill_modes = drm_helper_probe_single_connector_modes,
1091 .destroy = dw_mipi_dsi_drm_connector_destroy,
1092 .reset = drm_atomic_helper_connector_reset,
1093 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
1094 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
1095 };
1096
1097 static int dw_mipi_dsi_register(struct drm_device *drm,
1098 struct dw_mipi_dsi *dsi)
1099 {
1100 struct drm_encoder *encoder = &dsi->encoder;
1101 struct drm_connector *connector = &dsi->connector;
1102 struct device *dev = dsi->dev;
1103 int ret;
1104
1105 encoder->possible_crtcs = drm_of_find_possible_crtcs(drm,
1106 dev->of_node);
1107 /*
1108 * If we failed to find the CRTC(s) which this encoder is
1109 * supposed to be connected to, it's because the CRTC has
1110 * not been registered yet. Defer probing, and hope that
1111 * the required CRTC is added later.
1112 */
1113 if (encoder->possible_crtcs == 0)
1114 return -EPROBE_DEFER;
1115
1116 drm_encoder_helper_add(&dsi->encoder,
1117 &dw_mipi_dsi_encoder_helper_funcs);
1118 ret = drm_encoder_init(drm, &dsi->encoder, &dw_mipi_dsi_encoder_funcs,
1119 DRM_MODE_ENCODER_DSI, NULL);
1120 if (ret) {
1121 DRM_DEV_ERROR(dev, "Failed to initialize encoder with drm\n");
1122 return ret;
1123 }
1124
1125 drm_connector_helper_add(connector,
1126 &dw_mipi_dsi_connector_helper_funcs);
1127
1128 drm_connector_init(drm, &dsi->connector,
1129 &dw_mipi_dsi_atomic_connector_funcs,
1130 DRM_MODE_CONNECTOR_DSI);
1131
1132 drm_mode_connector_attach_encoder(connector, encoder);
1133
1134 return 0;
1135 }
1136
1137 static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi)
1138 {
1139 struct device_node *np = dsi->dev->of_node;
1140
1141 dsi->grf_regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
1142 if (IS_ERR(dsi->grf_regmap)) {
1143 DRM_DEV_ERROR(dsi->dev, "Unable to get rockchip,grf\n");
1144 return PTR_ERR(dsi->grf_regmap);
1145 }
1146
1147 return 0;
1148 }
1149
1150 static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
1151 .dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT,
1152 .dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT,
1153 .grf_switch_reg = RK3288_GRF_SOC_CON6,
1154 .max_data_lanes = 4,
1155 };
1156
1157 static struct dw_mipi_dsi_plat_data rk3399_mipi_dsi_drv_data = {
1158 .dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT,
1159 .dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT,
1160 .grf_switch_reg = RK3399_GRF_SOC_CON20,
1161 .grf_dsi0_mode = RK3399_GRF_DSI_MODE,
1162 .grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22,
1163 .flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK,
1164 .max_data_lanes = 4,
1165 };
1166
1167 static const struct of_device_id dw_mipi_dsi_dt_ids[] = {
1168 {
1169 .compatible = "rockchip,rk3288-mipi-dsi",
1170 .data = &rk3288_mipi_dsi_drv_data,
1171 }, {
1172 .compatible = "rockchip,rk3399-mipi-dsi",
1173 .data = &rk3399_mipi_dsi_drv_data,
1174 },
1175 { /* sentinel */ }
1176 };
1177 MODULE_DEVICE_TABLE(of, dw_mipi_dsi_dt_ids);
1178
1179 static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
1180 void *data)
1181 {
1182 const struct of_device_id *of_id =
1183 of_match_device(dw_mipi_dsi_dt_ids, dev);
1184 const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
1185 struct platform_device *pdev = to_platform_device(dev);
1186 struct reset_control *apb_rst;
1187 struct drm_device *drm = data;
1188 struct dw_mipi_dsi *dsi;
1189 struct resource *res;
1190 int ret;
1191
1192 dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
1193 if (!dsi)
1194 return -ENOMEM;
1195
1196 dsi->dev = dev;
1197 dsi->pdata = pdata;
1198 dsi->dpms_mode = DRM_MODE_DPMS_OFF;
1199
1200 ret = rockchip_mipi_parse_dt(dsi);
1201 if (ret)
1202 return ret;
1203
1204 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1205 if (!res)
1206 return -ENODEV;
1207
1208 dsi->base = devm_ioremap_resource(dev, res);
1209 if (IS_ERR(dsi->base))
1210 return PTR_ERR(dsi->base);
1211
1212 dsi->pllref_clk = devm_clk_get(dev, "ref");
1213 if (IS_ERR(dsi->pllref_clk)) {
1214 ret = PTR_ERR(dsi->pllref_clk);
1215 DRM_DEV_ERROR(dev,
1216 "Unable to get pll reference clock: %d\n", ret);
1217 return ret;
1218 }
1219
1220 dsi->pclk = devm_clk_get(dev, "pclk");
1221 if (IS_ERR(dsi->pclk)) {
1222 ret = PTR_ERR(dsi->pclk);
1223 DRM_DEV_ERROR(dev, "Unable to get pclk: %d\n", ret);
1224 return ret;
1225 }
1226
1227 /*
1228 * Note that the reset was not defined in the initial device tree, so
1229 * we have to be prepared for it not being found.
1230 */
1231 apb_rst = devm_reset_control_get(dev, "apb");
1232 if (IS_ERR(apb_rst)) {
1233 ret = PTR_ERR(apb_rst);
1234 if (ret == -ENOENT) {
1235 apb_rst = NULL;
1236 } else {
1237 DRM_DEV_ERROR(dev,
1238 "Unable to get reset control: %d\n", ret);
1239 return ret;
1240 }
1241 }
1242
1243 if (apb_rst) {
1244 ret = clk_prepare_enable(dsi->pclk);
1245 if (ret) {
1246 DRM_DEV_ERROR(dev, "Failed to enable pclk\n");
1247 return ret;
1248 }
1249
1250 reset_control_assert(apb_rst);
1251 usleep_range(10, 20);
1252 reset_control_deassert(apb_rst);
1253
1254 clk_disable_unprepare(dsi->pclk);
1255 }
1256
1257 if (pdata->flags & DW_MIPI_NEEDS_PHY_CFG_CLK) {
1258 dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg");
1259 if (IS_ERR(dsi->phy_cfg_clk)) {
1260 ret = PTR_ERR(dsi->phy_cfg_clk);
1261 DRM_DEV_ERROR(dev,
1262 "Unable to get phy_cfg_clk: %d\n", ret);
1263 return ret;
1264 }
1265 }
1266
1267 if (pdata->flags & DW_MIPI_NEEDS_GRF_CLK) {
1268 dsi->grf_clk = devm_clk_get(dev, "grf");
1269 if (IS_ERR(dsi->grf_clk)) {
1270 ret = PTR_ERR(dsi->grf_clk);
1271 DRM_DEV_ERROR(dev, "Unable to get grf_clk: %d\n", ret);
1272 return ret;
1273 }
1274 }
1275
1276 ret = clk_prepare_enable(dsi->pllref_clk);
1277 if (ret) {
1278 DRM_DEV_ERROR(dev, "Failed to enable pllref_clk\n");
1279 return ret;
1280 }
1281
1282 ret = dw_mipi_dsi_register(drm, dsi);
1283 if (ret) {
1284 DRM_DEV_ERROR(dev, "Failed to register mipi_dsi: %d\n", ret);
1285 goto err_pllref;
1286 }
1287
1288 pm_runtime_enable(dev);
1289
1290 dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
1291 dsi->dsi_host.dev = dev;
1292 ret = mipi_dsi_host_register(&dsi->dsi_host);
1293 if (ret) {
1294 DRM_DEV_ERROR(dev, "Failed to register MIPI host: %d\n", ret);
1295 goto err_cleanup;
1296 }
1297
1298 if (!dsi->panel) {
1299 ret = -EPROBE_DEFER;
1300 goto err_mipi_dsi_host;
1301 }
1302
1303 dev_set_drvdata(dev, dsi);
1304 return 0;
1305
1306 err_mipi_dsi_host:
1307 mipi_dsi_host_unregister(&dsi->dsi_host);
1308 err_cleanup:
1309 drm_encoder_cleanup(&dsi->encoder);
1310 drm_connector_cleanup(&dsi->connector);
1311 err_pllref:
1312 clk_disable_unprepare(dsi->pllref_clk);
1313 return ret;
1314 }
1315
1316 static void dw_mipi_dsi_unbind(struct device *dev, struct device *master,
1317 void *data)
1318 {
1319 struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
1320
1321 mipi_dsi_host_unregister(&dsi->dsi_host);
1322 pm_runtime_disable(dev);
1323 clk_disable_unprepare(dsi->pllref_clk);
1324 }
1325
1326 static const struct component_ops dw_mipi_dsi_ops = {
1327 .bind = dw_mipi_dsi_bind,
1328 .unbind = dw_mipi_dsi_unbind,
1329 };
1330
1331 static int dw_mipi_dsi_probe(struct platform_device *pdev)
1332 {
1333 return component_add(&pdev->dev, &dw_mipi_dsi_ops);
1334 }
1335
1336 static int dw_mipi_dsi_remove(struct platform_device *pdev)
1337 {
1338 component_del(&pdev->dev, &dw_mipi_dsi_ops);
1339 return 0;
1340 }
1341
1342 struct platform_driver dw_mipi_dsi_driver = {
1343 .probe = dw_mipi_dsi_probe,
1344 .remove = dw_mipi_dsi_remove,
1345 .driver = {
1346 .of_match_table = dw_mipi_dsi_dt_ids,
1347 .name = DRIVER_NAME,
1348 },
1349 };