2 * HID driver for Sony / PS2 / PS3 BD devices.
4 * Copyright (c) 1999 Andreas Gal
5 * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
6 * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
7 * Copyright (c) 2008 Jiri Slaby
8 * Copyright (c) 2012 David Dillow <dave@thedillows.org>
9 * Copyright (c) 2006-2013 Jiri Kosina
10 * Copyright (c) 2013 Colin Leitner <colin.leitner@gmail.com>
14 * This program is free software; you can redistribute it and/or modify it
15 * under the terms of the GNU General Public License as published by the Free
16 * Software Foundation; either version 2 of the License, or (at your option)
21 * NOTE: in order for the Sony PS3 BD Remote Control to be found by
22 * a Bluetooth host, the key combination Start+Enter has to be kept pressed
23 * for about 7 seconds with the Bluetooth Host Controller in discovering mode.
25 * There will be no PIN request from the device.
28 #include <linux/device.h>
29 #include <linux/hid.h>
30 #include <linux/module.h>
31 #include <linux/slab.h>
32 #include <linux/leds.h>
33 #include <linux/power_supply.h>
34 #include <linux/spinlock.h>
35 #include <linux/list.h>
36 #include <linux/idr.h>
37 #include <linux/input/mt.h>
41 #define VAIO_RDESC_CONSTANT BIT(0)
42 #define SIXAXIS_CONTROLLER_USB BIT(1)
43 #define SIXAXIS_CONTROLLER_BT BIT(2)
44 #define BUZZ_CONTROLLER BIT(3)
45 #define PS3REMOTE BIT(4)
46 #define DUALSHOCK4_CONTROLLER_USB BIT(5)
47 #define DUALSHOCK4_CONTROLLER_BT BIT(6)
49 #define SIXAXIS_CONTROLLER (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)
50 #define DUALSHOCK4_CONTROLLER (DUALSHOCK4_CONTROLLER_USB |\
51 DUALSHOCK4_CONTROLLER_BT)
52 #define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER | BUZZ_CONTROLLER |\
53 DUALSHOCK4_CONTROLLER)
54 #define SONY_BATTERY_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER)
55 #define SONY_FF_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER)
59 static const u8 sixaxis_rdesc_fixup
[] = {
60 0x95, 0x13, 0x09, 0x01, 0x81, 0x02, 0x95, 0x0C,
61 0x81, 0x01, 0x75, 0x10, 0x95, 0x04, 0x26, 0xFF,
62 0x03, 0x46, 0xFF, 0x03, 0x09, 0x01, 0x81, 0x02
65 static const u8 sixaxis_rdesc_fixup2
[] = {
66 0x05, 0x01, 0x09, 0x04, 0xa1, 0x01, 0xa1, 0x02,
67 0x85, 0x01, 0x75, 0x08, 0x95, 0x01, 0x15, 0x00,
68 0x26, 0xff, 0x00, 0x81, 0x03, 0x75, 0x01, 0x95,
69 0x13, 0x15, 0x00, 0x25, 0x01, 0x35, 0x00, 0x45,
70 0x01, 0x05, 0x09, 0x19, 0x01, 0x29, 0x13, 0x81,
71 0x02, 0x75, 0x01, 0x95, 0x0d, 0x06, 0x00, 0xff,
72 0x81, 0x03, 0x15, 0x00, 0x26, 0xff, 0x00, 0x05,
73 0x01, 0x09, 0x01, 0xa1, 0x00, 0x75, 0x08, 0x95,
74 0x04, 0x35, 0x00, 0x46, 0xff, 0x00, 0x09, 0x30,
75 0x09, 0x31, 0x09, 0x32, 0x09, 0x35, 0x81, 0x02,
76 0xc0, 0x05, 0x01, 0x95, 0x13, 0x09, 0x01, 0x81,
77 0x02, 0x95, 0x0c, 0x81, 0x01, 0x75, 0x10, 0x95,
78 0x04, 0x26, 0xff, 0x03, 0x46, 0xff, 0x03, 0x09,
79 0x01, 0x81, 0x02, 0xc0, 0xa1, 0x02, 0x85, 0x02,
80 0x75, 0x08, 0x95, 0x30, 0x09, 0x01, 0xb1, 0x02,
81 0xc0, 0xa1, 0x02, 0x85, 0xee, 0x75, 0x08, 0x95,
82 0x30, 0x09, 0x01, 0xb1, 0x02, 0xc0, 0xa1, 0x02,
83 0x85, 0xef, 0x75, 0x08, 0x95, 0x30, 0x09, 0x01,
84 0xb1, 0x02, 0xc0, 0xc0,
88 * The default descriptor doesn't provide mapping for the accelerometers
89 * or orientation sensors. This fixed descriptor maps the accelerometers
90 * to usage values 0x40, 0x41 and 0x42 and maps the orientation sensors
91 * to usage values 0x43, 0x44 and 0x45.
93 static u8 dualshock4_usb_rdesc
[] = {
94 0x05, 0x01, /* Usage Page (Desktop), */
95 0x09, 0x05, /* Usage (Gamepad), */
96 0xA1, 0x01, /* Collection (Application), */
97 0x85, 0x01, /* Report ID (1), */
98 0x09, 0x30, /* Usage (X), */
99 0x09, 0x31, /* Usage (Y), */
100 0x09, 0x32, /* Usage (Z), */
101 0x09, 0x35, /* Usage (Rz), */
102 0x15, 0x00, /* Logical Minimum (0), */
103 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
104 0x75, 0x08, /* Report Size (8), */
105 0x95, 0x04, /* Report Count (4), */
106 0x81, 0x02, /* Input (Variable), */
107 0x09, 0x39, /* Usage (Hat Switch), */
108 0x15, 0x00, /* Logical Minimum (0), */
109 0x25, 0x07, /* Logical Maximum (7), */
110 0x35, 0x00, /* Physical Minimum (0), */
111 0x46, 0x3B, 0x01, /* Physical Maximum (315), */
112 0x65, 0x14, /* Unit (Degrees), */
113 0x75, 0x04, /* Report Size (4), */
114 0x95, 0x01, /* Report Count (1), */
115 0x81, 0x42, /* Input (Variable, Null State), */
116 0x65, 0x00, /* Unit, */
117 0x05, 0x09, /* Usage Page (Button), */
118 0x19, 0x01, /* Usage Minimum (01h), */
119 0x29, 0x0E, /* Usage Maximum (0Eh), */
120 0x15, 0x00, /* Logical Minimum (0), */
121 0x25, 0x01, /* Logical Maximum (1), */
122 0x75, 0x01, /* Report Size (1), */
123 0x95, 0x0E, /* Report Count (14), */
124 0x81, 0x02, /* Input (Variable), */
125 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
126 0x09, 0x20, /* Usage (20h), */
127 0x75, 0x06, /* Report Size (6), */
128 0x95, 0x01, /* Report Count (1), */
129 0x15, 0x00, /* Logical Minimum (0), */
130 0x25, 0x7F, /* Logical Maximum (127), */
131 0x81, 0x02, /* Input (Variable), */
132 0x05, 0x01, /* Usage Page (Desktop), */
133 0x09, 0x33, /* Usage (Rx), */
134 0x09, 0x34, /* Usage (Ry), */
135 0x15, 0x00, /* Logical Minimum (0), */
136 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
137 0x75, 0x08, /* Report Size (8), */
138 0x95, 0x02, /* Report Count (2), */
139 0x81, 0x02, /* Input (Variable), */
140 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
141 0x09, 0x21, /* Usage (21h), */
142 0x95, 0x03, /* Report Count (3), */
143 0x81, 0x02, /* Input (Variable), */
144 0x05, 0x01, /* Usage Page (Desktop), */
145 0x19, 0x40, /* Usage Minimum (40h), */
146 0x29, 0x42, /* Usage Maximum (42h), */
147 0x16, 0x00, 0x80, /* Logical Minimum (-32768), */
148 0x26, 0x00, 0x7F, /* Logical Maximum (32767), */
149 0x75, 0x10, /* Report Size (16), */
150 0x95, 0x03, /* Report Count (3), */
151 0x81, 0x02, /* Input (Variable), */
152 0x19, 0x43, /* Usage Minimum (43h), */
153 0x29, 0x45, /* Usage Maximum (45h), */
154 0x16, 0xFF, 0xBF, /* Logical Minimum (-16385), */
155 0x26, 0x00, 0x40, /* Logical Maximum (16384), */
156 0x95, 0x03, /* Report Count (3), */
157 0x81, 0x02, /* Input (Variable), */
158 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
159 0x09, 0x21, /* Usage (21h), */
160 0x15, 0x00, /* Logical Minimum (0), */
161 0x25, 0xFF, /* Logical Maximum (255), */
162 0x75, 0x08, /* Report Size (8), */
163 0x95, 0x27, /* Report Count (39), */
164 0x81, 0x02, /* Input (Variable), */
165 0x85, 0x05, /* Report ID (5), */
166 0x09, 0x22, /* Usage (22h), */
167 0x95, 0x1F, /* Report Count (31), */
168 0x91, 0x02, /* Output (Variable), */
169 0x85, 0x04, /* Report ID (4), */
170 0x09, 0x23, /* Usage (23h), */
171 0x95, 0x24, /* Report Count (36), */
172 0xB1, 0x02, /* Feature (Variable), */
173 0x85, 0x02, /* Report ID (2), */
174 0x09, 0x24, /* Usage (24h), */
175 0x95, 0x24, /* Report Count (36), */
176 0xB1, 0x02, /* Feature (Variable), */
177 0x85, 0x08, /* Report ID (8), */
178 0x09, 0x25, /* Usage (25h), */
179 0x95, 0x03, /* Report Count (3), */
180 0xB1, 0x02, /* Feature (Variable), */
181 0x85, 0x10, /* Report ID (16), */
182 0x09, 0x26, /* Usage (26h), */
183 0x95, 0x04, /* Report Count (4), */
184 0xB1, 0x02, /* Feature (Variable), */
185 0x85, 0x11, /* Report ID (17), */
186 0x09, 0x27, /* Usage (27h), */
187 0x95, 0x02, /* Report Count (2), */
188 0xB1, 0x02, /* Feature (Variable), */
189 0x85, 0x12, /* Report ID (18), */
190 0x06, 0x02, 0xFF, /* Usage Page (FF02h), */
191 0x09, 0x21, /* Usage (21h), */
192 0x95, 0x0F, /* Report Count (15), */
193 0xB1, 0x02, /* Feature (Variable), */
194 0x85, 0x13, /* Report ID (19), */
195 0x09, 0x22, /* Usage (22h), */
196 0x95, 0x16, /* Report Count (22), */
197 0xB1, 0x02, /* Feature (Variable), */
198 0x85, 0x14, /* Report ID (20), */
199 0x06, 0x05, 0xFF, /* Usage Page (FF05h), */
200 0x09, 0x20, /* Usage (20h), */
201 0x95, 0x10, /* Report Count (16), */
202 0xB1, 0x02, /* Feature (Variable), */
203 0x85, 0x15, /* Report ID (21), */
204 0x09, 0x21, /* Usage (21h), */
205 0x95, 0x2C, /* Report Count (44), */
206 0xB1, 0x02, /* Feature (Variable), */
207 0x06, 0x80, 0xFF, /* Usage Page (FF80h), */
208 0x85, 0x80, /* Report ID (128), */
209 0x09, 0x20, /* Usage (20h), */
210 0x95, 0x06, /* Report Count (6), */
211 0xB1, 0x02, /* Feature (Variable), */
212 0x85, 0x81, /* Report ID (129), */
213 0x09, 0x21, /* Usage (21h), */
214 0x95, 0x06, /* Report Count (6), */
215 0xB1, 0x02, /* Feature (Variable), */
216 0x85, 0x82, /* Report ID (130), */
217 0x09, 0x22, /* Usage (22h), */
218 0x95, 0x05, /* Report Count (5), */
219 0xB1, 0x02, /* Feature (Variable), */
220 0x85, 0x83, /* Report ID (131), */
221 0x09, 0x23, /* Usage (23h), */
222 0x95, 0x01, /* Report Count (1), */
223 0xB1, 0x02, /* Feature (Variable), */
224 0x85, 0x84, /* Report ID (132), */
225 0x09, 0x24, /* Usage (24h), */
226 0x95, 0x04, /* Report Count (4), */
227 0xB1, 0x02, /* Feature (Variable), */
228 0x85, 0x85, /* Report ID (133), */
229 0x09, 0x25, /* Usage (25h), */
230 0x95, 0x06, /* Report Count (6), */
231 0xB1, 0x02, /* Feature (Variable), */
232 0x85, 0x86, /* Report ID (134), */
233 0x09, 0x26, /* Usage (26h), */
234 0x95, 0x06, /* Report Count (6), */
235 0xB1, 0x02, /* Feature (Variable), */
236 0x85, 0x87, /* Report ID (135), */
237 0x09, 0x27, /* Usage (27h), */
238 0x95, 0x23, /* Report Count (35), */
239 0xB1, 0x02, /* Feature (Variable), */
240 0x85, 0x88, /* Report ID (136), */
241 0x09, 0x28, /* Usage (28h), */
242 0x95, 0x22, /* Report Count (34), */
243 0xB1, 0x02, /* Feature (Variable), */
244 0x85, 0x89, /* Report ID (137), */
245 0x09, 0x29, /* Usage (29h), */
246 0x95, 0x02, /* Report Count (2), */
247 0xB1, 0x02, /* Feature (Variable), */
248 0x85, 0x90, /* Report ID (144), */
249 0x09, 0x30, /* Usage (30h), */
250 0x95, 0x05, /* Report Count (5), */
251 0xB1, 0x02, /* Feature (Variable), */
252 0x85, 0x91, /* Report ID (145), */
253 0x09, 0x31, /* Usage (31h), */
254 0x95, 0x03, /* Report Count (3), */
255 0xB1, 0x02, /* Feature (Variable), */
256 0x85, 0x92, /* Report ID (146), */
257 0x09, 0x32, /* Usage (32h), */
258 0x95, 0x03, /* Report Count (3), */
259 0xB1, 0x02, /* Feature (Variable), */
260 0x85, 0x93, /* Report ID (147), */
261 0x09, 0x33, /* Usage (33h), */
262 0x95, 0x0C, /* Report Count (12), */
263 0xB1, 0x02, /* Feature (Variable), */
264 0x85, 0xA0, /* Report ID (160), */
265 0x09, 0x40, /* Usage (40h), */
266 0x95, 0x06, /* Report Count (6), */
267 0xB1, 0x02, /* Feature (Variable), */
268 0x85, 0xA1, /* Report ID (161), */
269 0x09, 0x41, /* Usage (41h), */
270 0x95, 0x01, /* Report Count (1), */
271 0xB1, 0x02, /* Feature (Variable), */
272 0x85, 0xA2, /* Report ID (162), */
273 0x09, 0x42, /* Usage (42h), */
274 0x95, 0x01, /* Report Count (1), */
275 0xB1, 0x02, /* Feature (Variable), */
276 0x85, 0xA3, /* Report ID (163), */
277 0x09, 0x43, /* Usage (43h), */
278 0x95, 0x30, /* Report Count (48), */
279 0xB1, 0x02, /* Feature (Variable), */
280 0x85, 0xA4, /* Report ID (164), */
281 0x09, 0x44, /* Usage (44h), */
282 0x95, 0x0D, /* Report Count (13), */
283 0xB1, 0x02, /* Feature (Variable), */
284 0x85, 0xA5, /* Report ID (165), */
285 0x09, 0x45, /* Usage (45h), */
286 0x95, 0x15, /* Report Count (21), */
287 0xB1, 0x02, /* Feature (Variable), */
288 0x85, 0xA6, /* Report ID (166), */
289 0x09, 0x46, /* Usage (46h), */
290 0x95, 0x15, /* Report Count (21), */
291 0xB1, 0x02, /* Feature (Variable), */
292 0x85, 0xF0, /* Report ID (240), */
293 0x09, 0x47, /* Usage (47h), */
294 0x95, 0x3F, /* Report Count (63), */
295 0xB1, 0x02, /* Feature (Variable), */
296 0x85, 0xF1, /* Report ID (241), */
297 0x09, 0x48, /* Usage (48h), */
298 0x95, 0x3F, /* Report Count (63), */
299 0xB1, 0x02, /* Feature (Variable), */
300 0x85, 0xF2, /* Report ID (242), */
301 0x09, 0x49, /* Usage (49h), */
302 0x95, 0x0F, /* Report Count (15), */
303 0xB1, 0x02, /* Feature (Variable), */
304 0x85, 0xA7, /* Report ID (167), */
305 0x09, 0x4A, /* Usage (4Ah), */
306 0x95, 0x01, /* Report Count (1), */
307 0xB1, 0x02, /* Feature (Variable), */
308 0x85, 0xA8, /* Report ID (168), */
309 0x09, 0x4B, /* Usage (4Bh), */
310 0x95, 0x01, /* Report Count (1), */
311 0xB1, 0x02, /* Feature (Variable), */
312 0x85, 0xA9, /* Report ID (169), */
313 0x09, 0x4C, /* Usage (4Ch), */
314 0x95, 0x08, /* Report Count (8), */
315 0xB1, 0x02, /* Feature (Variable), */
316 0x85, 0xAA, /* Report ID (170), */
317 0x09, 0x4E, /* Usage (4Eh), */
318 0x95, 0x01, /* Report Count (1), */
319 0xB1, 0x02, /* Feature (Variable), */
320 0x85, 0xAB, /* Report ID (171), */
321 0x09, 0x4F, /* Usage (4Fh), */
322 0x95, 0x39, /* Report Count (57), */
323 0xB1, 0x02, /* Feature (Variable), */
324 0x85, 0xAC, /* Report ID (172), */
325 0x09, 0x50, /* Usage (50h), */
326 0x95, 0x39, /* Report Count (57), */
327 0xB1, 0x02, /* Feature (Variable), */
328 0x85, 0xAD, /* Report ID (173), */
329 0x09, 0x51, /* Usage (51h), */
330 0x95, 0x0B, /* Report Count (11), */
331 0xB1, 0x02, /* Feature (Variable), */
332 0x85, 0xAE, /* Report ID (174), */
333 0x09, 0x52, /* Usage (52h), */
334 0x95, 0x01, /* Report Count (1), */
335 0xB1, 0x02, /* Feature (Variable), */
336 0x85, 0xAF, /* Report ID (175), */
337 0x09, 0x53, /* Usage (53h), */
338 0x95, 0x02, /* Report Count (2), */
339 0xB1, 0x02, /* Feature (Variable), */
340 0x85, 0xB0, /* Report ID (176), */
341 0x09, 0x54, /* Usage (54h), */
342 0x95, 0x3F, /* Report Count (63), */
343 0xB1, 0x02, /* Feature (Variable), */
344 0xC0 /* End Collection */
348 * The default behavior of the Dualshock 4 is to send reports using report
349 * type 1 when running over Bluetooth. However, as soon as it receives a
350 * report of type 17 to set the LEDs or rumble it starts returning it's state
351 * in report 17 instead of 1. Since report 17 is undefined in the default HID
352 * descriptor the button and axis definitions must be moved to report 17 or
353 * the HID layer won't process the received input once a report is sent.
355 static u8 dualshock4_bt_rdesc
[] = {
356 0x05, 0x01, /* Usage Page (Desktop), */
357 0x09, 0x05, /* Usage (Gamepad), */
358 0xA1, 0x01, /* Collection (Application), */
359 0x85, 0x01, /* Report ID (1), */
360 0x75, 0x08, /* Report Size (8), */
361 0x95, 0x0A, /* Report Count (9), */
362 0x81, 0x02, /* Input (Variable), */
363 0x06, 0x04, 0xFF, /* Usage Page (FF04h), */
364 0x85, 0x02, /* Report ID (2), */
365 0x09, 0x24, /* Usage (24h), */
366 0x95, 0x24, /* Report Count (36), */
367 0xB1, 0x02, /* Feature (Variable), */
368 0x85, 0xA3, /* Report ID (163), */
369 0x09, 0x25, /* Usage (25h), */
370 0x95, 0x30, /* Report Count (48), */
371 0xB1, 0x02, /* Feature (Variable), */
372 0x85, 0x05, /* Report ID (5), */
373 0x09, 0x26, /* Usage (26h), */
374 0x95, 0x28, /* Report Count (40), */
375 0xB1, 0x02, /* Feature (Variable), */
376 0x85, 0x06, /* Report ID (6), */
377 0x09, 0x27, /* Usage (27h), */
378 0x95, 0x34, /* Report Count (52), */
379 0xB1, 0x02, /* Feature (Variable), */
380 0x85, 0x07, /* Report ID (7), */
381 0x09, 0x28, /* Usage (28h), */
382 0x95, 0x30, /* Report Count (48), */
383 0xB1, 0x02, /* Feature (Variable), */
384 0x85, 0x08, /* Report ID (8), */
385 0x09, 0x29, /* Usage (29h), */
386 0x95, 0x2F, /* Report Count (47), */
387 0xB1, 0x02, /* Feature (Variable), */
388 0x06, 0x03, 0xFF, /* Usage Page (FF03h), */
389 0x85, 0x03, /* Report ID (3), */
390 0x09, 0x21, /* Usage (21h), */
391 0x95, 0x26, /* Report Count (38), */
392 0xB1, 0x02, /* Feature (Variable), */
393 0x85, 0x04, /* Report ID (4), */
394 0x09, 0x22, /* Usage (22h), */
395 0x95, 0x2E, /* Report Count (46), */
396 0xB1, 0x02, /* Feature (Variable), */
397 0x85, 0xF0, /* Report ID (240), */
398 0x09, 0x47, /* Usage (47h), */
399 0x95, 0x3F, /* Report Count (63), */
400 0xB1, 0x02, /* Feature (Variable), */
401 0x85, 0xF1, /* Report ID (241), */
402 0x09, 0x48, /* Usage (48h), */
403 0x95, 0x3F, /* Report Count (63), */
404 0xB1, 0x02, /* Feature (Variable), */
405 0x85, 0xF2, /* Report ID (242), */
406 0x09, 0x49, /* Usage (49h), */
407 0x95, 0x0F, /* Report Count (15), */
408 0xB1, 0x02, /* Feature (Variable), */
409 0x85, 0x11, /* Report ID (17), */
410 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
411 0x09, 0x20, /* Usage (20h), */
412 0x95, 0x02, /* Report Count (2), */
413 0x81, 0x02, /* Input (Variable), */
414 0x05, 0x01, /* Usage Page (Desktop), */
415 0x09, 0x30, /* Usage (X), */
416 0x09, 0x31, /* Usage (Y), */
417 0x09, 0x32, /* Usage (Z), */
418 0x09, 0x35, /* Usage (Rz), */
419 0x15, 0x00, /* Logical Minimum (0), */
420 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
421 0x75, 0x08, /* Report Size (8), */
422 0x95, 0x04, /* Report Count (4), */
423 0x81, 0x02, /* Input (Variable), */
424 0x09, 0x39, /* Usage (Hat Switch), */
425 0x15, 0x00, /* Logical Minimum (0), */
426 0x25, 0x07, /* Logical Maximum (7), */
427 0x75, 0x04, /* Report Size (4), */
428 0x95, 0x01, /* Report Count (1), */
429 0x81, 0x42, /* Input (Variable, Null State), */
430 0x05, 0x09, /* Usage Page (Button), */
431 0x19, 0x01, /* Usage Minimum (01h), */
432 0x29, 0x0E, /* Usage Maximum (0Eh), */
433 0x15, 0x00, /* Logical Minimum (0), */
434 0x25, 0x01, /* Logical Maximum (1), */
435 0x75, 0x01, /* Report Size (1), */
436 0x95, 0x0E, /* Report Count (14), */
437 0x81, 0x02, /* Input (Variable), */
438 0x75, 0x06, /* Report Size (6), */
439 0x95, 0x01, /* Report Count (1), */
440 0x81, 0x01, /* Input (Constant), */
441 0x05, 0x01, /* Usage Page (Desktop), */
442 0x09, 0x33, /* Usage (Rx), */
443 0x09, 0x34, /* Usage (Ry), */
444 0x15, 0x00, /* Logical Minimum (0), */
445 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
446 0x75, 0x08, /* Report Size (8), */
447 0x95, 0x02, /* Report Count (2), */
448 0x81, 0x02, /* Input (Variable), */
449 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
450 0x09, 0x20, /* Usage (20h), */
451 0x95, 0x03, /* Report Count (3), */
452 0x81, 0x02, /* Input (Variable), */
453 0x05, 0x01, /* Usage Page (Desktop), */
454 0x19, 0x40, /* Usage Minimum (40h), */
455 0x29, 0x42, /* Usage Maximum (42h), */
456 0x16, 0x00, 0x80, /* Logical Minimum (-32768), */
457 0x26, 0x00, 0x7F, /* Logical Maximum (32767), */
458 0x75, 0x10, /* Report Size (16), */
459 0x95, 0x03, /* Report Count (3), */
460 0x81, 0x02, /* Input (Variable), */
461 0x19, 0x43, /* Usage Minimum (43h), */
462 0x29, 0x45, /* Usage Maximum (45h), */
463 0x16, 0xFF, 0xBF, /* Logical Minimum (-16385), */
464 0x26, 0x00, 0x40, /* Logical Maximum (16384), */
465 0x95, 0x03, /* Report Count (3), */
466 0x81, 0x02, /* Input (Variable), */
467 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
468 0x09, 0x20, /* Usage (20h), */
469 0x15, 0x00, /* Logical Minimum (0), */
470 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
471 0x75, 0x08, /* Report Size (8), */
472 0x95, 0x31, /* Report Count (51), */
473 0x81, 0x02, /* Input (Variable), */
474 0x09, 0x21, /* Usage (21h), */
475 0x75, 0x08, /* Report Size (8), */
476 0x95, 0x4D, /* Report Count (77), */
477 0x91, 0x02, /* Output (Variable), */
478 0x85, 0x12, /* Report ID (18), */
479 0x09, 0x22, /* Usage (22h), */
480 0x95, 0x8D, /* Report Count (141), */
481 0x81, 0x02, /* Input (Variable), */
482 0x09, 0x23, /* Usage (23h), */
483 0x91, 0x02, /* Output (Variable), */
484 0x85, 0x13, /* Report ID (19), */
485 0x09, 0x24, /* Usage (24h), */
486 0x95, 0xCD, /* Report Count (205), */
487 0x81, 0x02, /* Input (Variable), */
488 0x09, 0x25, /* Usage (25h), */
489 0x91, 0x02, /* Output (Variable), */
490 0x85, 0x14, /* Report ID (20), */
491 0x09, 0x26, /* Usage (26h), */
492 0x96, 0x0D, 0x01, /* Report Count (269), */
493 0x81, 0x02, /* Input (Variable), */
494 0x09, 0x27, /* Usage (27h), */
495 0x91, 0x02, /* Output (Variable), */
496 0x85, 0x15, /* Report ID (21), */
497 0x09, 0x28, /* Usage (28h), */
498 0x96, 0x4D, 0x01, /* Report Count (333), */
499 0x81, 0x02, /* Input (Variable), */
500 0x09, 0x29, /* Usage (29h), */
501 0x91, 0x02, /* Output (Variable), */
502 0x85, 0x16, /* Report ID (22), */
503 0x09, 0x2A, /* Usage (2Ah), */
504 0x96, 0x8D, 0x01, /* Report Count (397), */
505 0x81, 0x02, /* Input (Variable), */
506 0x09, 0x2B, /* Usage (2Bh), */
507 0x91, 0x02, /* Output (Variable), */
508 0x85, 0x17, /* Report ID (23), */
509 0x09, 0x2C, /* Usage (2Ch), */
510 0x96, 0xCD, 0x01, /* Report Count (461), */
511 0x81, 0x02, /* Input (Variable), */
512 0x09, 0x2D, /* Usage (2Dh), */
513 0x91, 0x02, /* Output (Variable), */
514 0x85, 0x18, /* Report ID (24), */
515 0x09, 0x2E, /* Usage (2Eh), */
516 0x96, 0x0D, 0x02, /* Report Count (525), */
517 0x81, 0x02, /* Input (Variable), */
518 0x09, 0x2F, /* Usage (2Fh), */
519 0x91, 0x02, /* Output (Variable), */
520 0x85, 0x19, /* Report ID (25), */
521 0x09, 0x30, /* Usage (30h), */
522 0x96, 0x22, 0x02, /* Report Count (546), */
523 0x81, 0x02, /* Input (Variable), */
524 0x09, 0x31, /* Usage (31h), */
525 0x91, 0x02, /* Output (Variable), */
526 0x06, 0x80, 0xFF, /* Usage Page (FF80h), */
527 0x85, 0x82, /* Report ID (130), */
528 0x09, 0x22, /* Usage (22h), */
529 0x95, 0x3F, /* Report Count (63), */
530 0xB1, 0x02, /* Feature (Variable), */
531 0x85, 0x83, /* Report ID (131), */
532 0x09, 0x23, /* Usage (23h), */
533 0xB1, 0x02, /* Feature (Variable), */
534 0x85, 0x84, /* Report ID (132), */
535 0x09, 0x24, /* Usage (24h), */
536 0xB1, 0x02, /* Feature (Variable), */
537 0x85, 0x90, /* Report ID (144), */
538 0x09, 0x30, /* Usage (30h), */
539 0xB1, 0x02, /* Feature (Variable), */
540 0x85, 0x91, /* Report ID (145), */
541 0x09, 0x31, /* Usage (31h), */
542 0xB1, 0x02, /* Feature (Variable), */
543 0x85, 0x92, /* Report ID (146), */
544 0x09, 0x32, /* Usage (32h), */
545 0xB1, 0x02, /* Feature (Variable), */
546 0x85, 0x93, /* Report ID (147), */
547 0x09, 0x33, /* Usage (33h), */
548 0xB1, 0x02, /* Feature (Variable), */
549 0x85, 0xA0, /* Report ID (160), */
550 0x09, 0x40, /* Usage (40h), */
551 0xB1, 0x02, /* Feature (Variable), */
552 0x85, 0xA4, /* Report ID (164), */
553 0x09, 0x44, /* Usage (44h), */
554 0xB1, 0x02, /* Feature (Variable), */
555 0xC0 /* End Collection */
558 static __u8 ps3remote_rdesc
[] = {
559 0x05, 0x01, /* GUsagePage Generic Desktop */
560 0x09, 0x05, /* LUsage 0x05 [Game Pad] */
561 0xA1, 0x01, /* MCollection Application (mouse, keyboard) */
563 /* Use collection 1 for joypad buttons */
564 0xA1, 0x02, /* MCollection Logical (interrelated data) */
566 /* Ignore the 1st byte, maybe it is used for a controller
567 * number but it's not needed for correct operation */
568 0x75, 0x08, /* GReportSize 0x08 [8] */
569 0x95, 0x01, /* GReportCount 0x01 [1] */
570 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
572 /* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these
573 * buttons multiple keypresses are allowed */
574 0x05, 0x09, /* GUsagePage Button */
575 0x19, 0x01, /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */
576 0x29, 0x18, /* LUsageMaximum 0x18 [Button 24] */
577 0x14, /* GLogicalMinimum [0] */
578 0x25, 0x01, /* GLogicalMaximum 0x01 [1] */
579 0x75, 0x01, /* GReportSize 0x01 [1] */
580 0x95, 0x18, /* GReportCount 0x18 [24] */
581 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
583 0xC0, /* MEndCollection */
585 /* Use collection 2 for remote control buttons */
586 0xA1, 0x02, /* MCollection Logical (interrelated data) */
588 /* 5th byte is used for remote control buttons */
589 0x05, 0x09, /* GUsagePage Button */
590 0x18, /* LUsageMinimum [No button pressed] */
591 0x29, 0xFE, /* LUsageMaximum 0xFE [Button 254] */
592 0x14, /* GLogicalMinimum [0] */
593 0x26, 0xFE, 0x00, /* GLogicalMaximum 0x00FE [254] */
594 0x75, 0x08, /* GReportSize 0x08 [8] */
595 0x95, 0x01, /* GReportCount 0x01 [1] */
598 /* Ignore bytes from 6th to 11th, 6th to 10th are always constant at
599 * 0xff and 11th is for press indication */
600 0x75, 0x08, /* GReportSize 0x08 [8] */
601 0x95, 0x06, /* GReportCount 0x06 [6] */
602 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
604 /* 12th byte is for battery strength */
605 0x05, 0x06, /* GUsagePage Generic Device Controls */
606 0x09, 0x20, /* LUsage 0x20 [Battery Strength] */
607 0x14, /* GLogicalMinimum [0] */
608 0x25, 0x05, /* GLogicalMaximum 0x05 [5] */
609 0x75, 0x08, /* GReportSize 0x08 [8] */
610 0x95, 0x01, /* GReportCount 0x01 [1] */
611 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
613 0xC0, /* MEndCollection */
615 0xC0 /* MEndCollection [Game Pad] */
618 static const unsigned int ps3remote_keymap_joypad_buttons
[] = {
620 [0x02] = BTN_THUMBL
, /* L3 */
621 [0x03] = BTN_THUMBR
, /* R3 */
627 [0x09] = BTN_TL2
, /* L2 */
628 [0x0a] = BTN_TR2
, /* R2 */
629 [0x0b] = BTN_TL
, /* L1 */
630 [0x0c] = BTN_TR
, /* R1 */
631 [0x0d] = KEY_OPTION
, /* options/triangle */
632 [0x0e] = KEY_BACK
, /* back/circle */
633 [0x0f] = BTN_0
, /* cross */
634 [0x10] = KEY_SCREEN
, /* view/square */
635 [0x11] = KEY_HOMEPAGE
, /* PS button */
638 static const unsigned int ps3remote_keymap_remote_buttons
[] = {
649 [0x0e] = KEY_ESC
, /* return */
651 [0x16] = KEY_EJECTCD
,
652 [0x1a] = KEY_MENU
, /* top menu */
654 [0x30] = KEY_PREVIOUS
,
657 [0x33] = KEY_REWIND
, /* scan back */
658 [0x34] = KEY_FORWARD
, /* scan forward */
661 [0x40] = KEY_CONTEXT_MENU
, /* pop up/menu */
662 [0x60] = KEY_FRAMEBACK
, /* slow/step back */
663 [0x61] = KEY_FRAMEFORWARD
, /* slow/step forward */
664 [0x63] = KEY_SUBTITLE
,
667 [0x70] = KEY_INFO
, /* display */
674 static const unsigned int buzz_keymap
[] = {
676 * The controller has 4 remote buzzers, each with one LED and 5
679 * We use the mapping chosen by the controller, which is:
682 * -------------------
689 * So, for example, the orange button on the third buzzer is mapped to
690 * BTN_TRIGGER_HAPPY14
692 [ 1] = BTN_TRIGGER_HAPPY1
,
693 [ 2] = BTN_TRIGGER_HAPPY2
,
694 [ 3] = BTN_TRIGGER_HAPPY3
,
695 [ 4] = BTN_TRIGGER_HAPPY4
,
696 [ 5] = BTN_TRIGGER_HAPPY5
,
697 [ 6] = BTN_TRIGGER_HAPPY6
,
698 [ 7] = BTN_TRIGGER_HAPPY7
,
699 [ 8] = BTN_TRIGGER_HAPPY8
,
700 [ 9] = BTN_TRIGGER_HAPPY9
,
701 [10] = BTN_TRIGGER_HAPPY10
,
702 [11] = BTN_TRIGGER_HAPPY11
,
703 [12] = BTN_TRIGGER_HAPPY12
,
704 [13] = BTN_TRIGGER_HAPPY13
,
705 [14] = BTN_TRIGGER_HAPPY14
,
706 [15] = BTN_TRIGGER_HAPPY15
,
707 [16] = BTN_TRIGGER_HAPPY16
,
708 [17] = BTN_TRIGGER_HAPPY17
,
709 [18] = BTN_TRIGGER_HAPPY18
,
710 [19] = BTN_TRIGGER_HAPPY19
,
711 [20] = BTN_TRIGGER_HAPPY20
,
714 static enum power_supply_property sony_battery_props
[] = {
715 POWER_SUPPLY_PROP_PRESENT
,
716 POWER_SUPPLY_PROP_CAPACITY
,
717 POWER_SUPPLY_PROP_SCOPE
,
718 POWER_SUPPLY_PROP_STATUS
,
722 __u8 time_enabled
; /* the total time the led is active (0xff means forever) */
723 __u8 duty_length
; /* how long a cycle is in deciseconds (0 means "really fast") */
725 __u8 duty_off
; /* % of duty_length the led is off (0xff means 100%) */
726 __u8 duty_on
; /* % of duty_length the led is on (0xff mean 100%) */
729 struct sixaxis_rumble
{
731 __u8 right_duration
; /* Right motor duration (0xff means forever) */
732 __u8 right_motor_on
; /* Right (small) motor on/off, only supports values of 0 or 1 (off/on) */
733 __u8 left_duration
; /* Left motor duration (0xff means forever) */
734 __u8 left_motor_force
; /* left (large) motor, supports force values from 0 to 255 */
737 struct sixaxis_output_report
{
739 struct sixaxis_rumble rumble
;
741 __u8 leds_bitmap
; /* bitmap of enabled LEDs: LED_1 = 0x02, LED_2 = 0x04, ... */
742 struct sixaxis_led led
[4]; /* LEDx at (4 - x) */
743 struct sixaxis_led _reserved
; /* LED5, not actually soldered */
746 union sixaxis_output_report_01
{
747 struct sixaxis_output_report data
;
751 static spinlock_t sony_dev_list_lock
;
752 static LIST_HEAD(sony_device_list
);
753 static DEFINE_IDA(sony_device_id_allocator
);
757 struct list_head list_node
;
758 struct hid_device
*hdev
;
759 struct led_classdev
*leds
[MAX_LEDS
];
760 unsigned long quirks
;
761 struct work_struct state_worker
;
762 struct power_supply battery
;
765 #ifdef CONFIG_SONY_FF
771 __u8 worker_initialized
;
773 __u8 battery_charging
;
774 __u8 battery_capacity
;
775 __u8 led_state
[MAX_LEDS
];
776 __u8 led_delay_on
[MAX_LEDS
];
777 __u8 led_delay_off
[MAX_LEDS
];
781 static __u8
*ps3remote_fixup(struct hid_device
*hdev
, __u8
*rdesc
,
784 *rsize
= sizeof(ps3remote_rdesc
);
785 return ps3remote_rdesc
;
788 static int ps3remote_mapping(struct hid_device
*hdev
, struct hid_input
*hi
,
789 struct hid_field
*field
, struct hid_usage
*usage
,
790 unsigned long **bit
, int *max
)
792 unsigned int key
= usage
->hid
& HID_USAGE
;
794 if ((usage
->hid
& HID_USAGE_PAGE
) != HID_UP_BUTTON
)
797 switch (usage
->collection_index
) {
799 if (key
>= ARRAY_SIZE(ps3remote_keymap_joypad_buttons
))
802 key
= ps3remote_keymap_joypad_buttons
[key
];
807 if (key
>= ARRAY_SIZE(ps3remote_keymap_remote_buttons
))
810 key
= ps3remote_keymap_remote_buttons
[key
];
818 hid_map_usage_clear(hi
, usage
, bit
, max
, EV_KEY
, key
);
823 /* Sony Vaio VGX has wrongly mouse pointer declared as constant */
824 static __u8
*sony_report_fixup(struct hid_device
*hdev
, __u8
*rdesc
,
827 struct sony_sc
*sc
= hid_get_drvdata(hdev
);
830 * Some Sony RF receivers wrongly declare the mouse pointer as a
831 * a constant non-data variable.
833 if ((sc
->quirks
& VAIO_RDESC_CONSTANT
) && *rsize
>= 56 &&
834 /* usage page: generic desktop controls */
835 /* rdesc[0] == 0x05 && rdesc[1] == 0x01 && */
837 rdesc
[2] == 0x09 && rdesc
[3] == 0x02 &&
838 /* input (usage page for x,y axes): constant, variable, relative */
839 rdesc
[54] == 0x81 && rdesc
[55] == 0x07) {
840 hid_info(hdev
, "Fixing up Sony RF Receiver report descriptor\n");
841 /* input: data, variable, relative */
846 * The default Dualshock 4 USB descriptor doesn't assign
847 * the gyroscope values to corresponding axes so we need a
850 if ((sc
->quirks
& DUALSHOCK4_CONTROLLER_USB
) && *rsize
== 467) {
851 hid_info(hdev
, "Using modified Dualshock 4 report descriptor with gyroscope axes\n");
852 rdesc
= dualshock4_usb_rdesc
;
853 *rsize
= sizeof(dualshock4_usb_rdesc
);
854 } else if ((sc
->quirks
& DUALSHOCK4_CONTROLLER_BT
) && *rsize
== 357) {
855 hid_info(hdev
, "Using modified Dualshock 4 Bluetooth report descriptor\n");
856 rdesc
= dualshock4_bt_rdesc
;
857 *rsize
= sizeof(dualshock4_bt_rdesc
);
860 /* The HID descriptor exposed over BT has a trailing zero byte */
861 if ((((sc
->quirks
& SIXAXIS_CONTROLLER_USB
) && *rsize
== 148) ||
862 ((sc
->quirks
& SIXAXIS_CONTROLLER_BT
) && *rsize
== 149)) &&
864 hid_info(hdev
, "Fixing up Sony Sixaxis report descriptor\n");
865 memcpy((void *)&rdesc
[83], (void *)&sixaxis_rdesc_fixup
,
866 sizeof(sixaxis_rdesc_fixup
));
867 } else if (sc
->quirks
& SIXAXIS_CONTROLLER_USB
&&
868 *rsize
> sizeof(sixaxis_rdesc_fixup2
)) {
869 hid_info(hdev
, "Sony Sixaxis clone detected. Using original report descriptor (size: %d clone; %d new)\n",
870 *rsize
, (int)sizeof(sixaxis_rdesc_fixup2
));
871 *rsize
= sizeof(sixaxis_rdesc_fixup2
);
872 memcpy(rdesc
, &sixaxis_rdesc_fixup2
, *rsize
);
875 if (sc
->quirks
& PS3REMOTE
)
876 return ps3remote_fixup(hdev
, rdesc
, rsize
);
881 static void sixaxis_parse_report(struct sony_sc
*sc
, __u8
*rd
, int size
)
883 static const __u8 sixaxis_battery_capacity
[] = { 0, 1, 25, 50, 75, 100 };
885 __u8 cable_state
, battery_capacity
, battery_charging
;
888 * The sixaxis is charging if the battery value is 0xee
889 * and it is fully charged if the value is 0xef.
890 * It does not report the actual level while charging so it
891 * is set to 100% while charging is in progress.
893 if (rd
[30] >= 0xee) {
894 battery_capacity
= 100;
895 battery_charging
= !(rd
[30] & 0x01);
897 __u8 index
= rd
[30] <= 5 ? rd
[30] : 5;
898 battery_capacity
= sixaxis_battery_capacity
[index
];
899 battery_charging
= 0;
901 cable_state
= !(rd
[31] & 0x04);
903 spin_lock_irqsave(&sc
->lock
, flags
);
904 sc
->cable_state
= cable_state
;
905 sc
->battery_capacity
= battery_capacity
;
906 sc
->battery_charging
= battery_charging
;
907 spin_unlock_irqrestore(&sc
->lock
, flags
);
910 static void dualshock4_parse_report(struct sony_sc
*sc
, __u8
*rd
, int size
)
912 struct hid_input
*hidinput
= list_entry(sc
->hdev
->inputs
.next
,
913 struct hid_input
, list
);
914 struct input_dev
*input_dev
= hidinput
->input
;
917 __u8 cable_state
, battery_capacity
, battery_charging
;
920 * Battery and touchpad data starts at byte 30 in the USB report and
921 * 32 in Bluetooth report.
923 offset
= (sc
->quirks
& DUALSHOCK4_CONTROLLER_USB
) ? 30 : 32;
926 * The lower 4 bits of byte 30 contain the battery level
927 * and the 5th bit contains the USB cable state.
929 cable_state
= (rd
[offset
] >> 4) & 0x01;
930 battery_capacity
= rd
[offset
] & 0x0F;
933 * When a USB power source is connected the battery level ranges from
934 * 0 to 10, and when running on battery power it ranges from 0 to 9.
935 * A battery level above 10 when plugged in means charge completed.
937 if (!cable_state
|| battery_capacity
> 10)
938 battery_charging
= 0;
940 battery_charging
= 1;
944 if (battery_capacity
> 10)
945 battery_capacity
= 10;
947 battery_capacity
*= 10;
949 spin_lock_irqsave(&sc
->lock
, flags
);
950 sc
->cable_state
= cable_state
;
951 sc
->battery_capacity
= battery_capacity
;
952 sc
->battery_charging
= battery_charging
;
953 spin_unlock_irqrestore(&sc
->lock
, flags
);
958 * The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB
959 * and 37 on Bluetooth.
960 * The first 7 bits of the first byte is a counter and bit 8 is a touch
961 * indicator that is 0 when pressed and 1 when not pressed.
962 * The next 3 bytes are two 12 bit touch coordinates, X and Y.
963 * The data for the second touch is in the same format and immediatly
964 * follows the data for the first.
966 for (n
= 0; n
< 2; n
++) {
969 x
= rd
[offset
+1] | ((rd
[offset
+2] & 0xF) << 8);
970 y
= ((rd
[offset
+2] & 0xF0) >> 4) | (rd
[offset
+3] << 4);
972 input_mt_slot(input_dev
, n
);
973 input_mt_report_slot_state(input_dev
, MT_TOOL_FINGER
,
975 input_report_abs(input_dev
, ABS_MT_POSITION_X
, x
);
976 input_report_abs(input_dev
, ABS_MT_POSITION_Y
, y
);
982 static int sony_raw_event(struct hid_device
*hdev
, struct hid_report
*report
,
985 struct sony_sc
*sc
= hid_get_drvdata(hdev
);
988 * Sixaxis HID report has acclerometers/gyro with MSByte first, this
989 * has to be BYTE_SWAPPED before passing up to joystick interface
991 if ((sc
->quirks
& SIXAXIS_CONTROLLER
) && rd
[0] == 0x01 && size
== 49) {
992 swap(rd
[41], rd
[42]);
993 swap(rd
[43], rd
[44]);
994 swap(rd
[45], rd
[46]);
995 swap(rd
[47], rd
[48]);
997 sixaxis_parse_report(sc
, rd
, size
);
998 } else if (((sc
->quirks
& DUALSHOCK4_CONTROLLER_USB
) && rd
[0] == 0x01 &&
999 size
== 64) || ((sc
->quirks
& DUALSHOCK4_CONTROLLER_BT
)
1000 && rd
[0] == 0x11 && size
== 78)) {
1001 dualshock4_parse_report(sc
, rd
, size
);
1007 static int sony_mapping(struct hid_device
*hdev
, struct hid_input
*hi
,
1008 struct hid_field
*field
, struct hid_usage
*usage
,
1009 unsigned long **bit
, int *max
)
1011 struct sony_sc
*sc
= hid_get_drvdata(hdev
);
1013 if (sc
->quirks
& BUZZ_CONTROLLER
) {
1014 unsigned int key
= usage
->hid
& HID_USAGE
;
1016 if ((usage
->hid
& HID_USAGE_PAGE
) != HID_UP_BUTTON
)
1019 switch (usage
->collection_index
) {
1021 if (key
>= ARRAY_SIZE(buzz_keymap
))
1024 key
= buzz_keymap
[key
];
1032 hid_map_usage_clear(hi
, usage
, bit
, max
, EV_KEY
, key
);
1036 if (sc
->quirks
& PS3REMOTE
)
1037 return ps3remote_mapping(hdev
, hi
, field
, usage
, bit
, max
);
1039 /* Let hid-core decide for the others */
1044 * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
1045 * to "operational". Without this, the ps3 controller will not report any
1048 static int sixaxis_set_operational_usb(struct hid_device
*hdev
)
1051 char *buf
= kmalloc(18, GFP_KERNEL
);
1056 ret
= hid_hw_raw_request(hdev
, 0xf2, buf
, 17, HID_FEATURE_REPORT
,
1057 HID_REQ_GET_REPORT
);
1060 hid_err(hdev
, "can't set operational mode\n");
1067 static int sixaxis_set_operational_bt(struct hid_device
*hdev
)
1069 unsigned char buf
[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 };
1070 return hid_hw_raw_request(hdev
, buf
[0], buf
, sizeof(buf
),
1071 HID_FEATURE_REPORT
, HID_REQ_SET_REPORT
);
1075 * Requesting feature report 0x02 in Bluetooth mode changes the state of the
1076 * controller so that it sends full input reports of type 0x11.
1078 static int dualshock4_set_operational_bt(struct hid_device
*hdev
)
1080 __u8 buf
[37] = { 0 };
1082 return hid_hw_raw_request(hdev
, 0x02, buf
, sizeof(buf
),
1083 HID_FEATURE_REPORT
, HID_REQ_GET_REPORT
);
1086 static void sixaxis_set_leds_from_id(int id
, __u8 values
[MAX_LEDS
])
1088 static const __u8 sixaxis_leds
[10][4] = {
1089 { 0x01, 0x00, 0x00, 0x00 },
1090 { 0x00, 0x01, 0x00, 0x00 },
1091 { 0x00, 0x00, 0x01, 0x00 },
1092 { 0x00, 0x00, 0x00, 0x01 },
1093 { 0x01, 0x00, 0x00, 0x01 },
1094 { 0x00, 0x01, 0x00, 0x01 },
1095 { 0x00, 0x00, 0x01, 0x01 },
1096 { 0x01, 0x00, 0x01, 0x01 },
1097 { 0x00, 0x01, 0x01, 0x01 },
1098 { 0x01, 0x01, 0x01, 0x01 }
1101 BUG_ON(MAX_LEDS
< ARRAY_SIZE(sixaxis_leds
[0]));
1107 memcpy(values
, sixaxis_leds
[id
], sizeof(sixaxis_leds
[id
]));
1110 static void dualshock4_set_leds_from_id(int id
, __u8 values
[MAX_LEDS
])
1112 /* The first 4 color/index entries match what the PS4 assigns */
1113 static const __u8 color_code
[7][3] = {
1114 /* Blue */ { 0x00, 0x00, 0x01 },
1115 /* Red */ { 0x01, 0x00, 0x00 },
1116 /* Green */ { 0x00, 0x01, 0x00 },
1117 /* Pink */ { 0x02, 0x00, 0x01 },
1118 /* Orange */ { 0x02, 0x01, 0x00 },
1119 /* Teal */ { 0x00, 0x01, 0x01 },
1120 /* White */ { 0x01, 0x01, 0x01 }
1123 BUG_ON(MAX_LEDS
< ARRAY_SIZE(color_code
[0]));
1129 memcpy(values
, color_code
[id
], sizeof(color_code
[id
]));
1132 static void buzz_set_leds(struct hid_device
*hdev
, const __u8
*leds
)
1134 struct list_head
*report_list
=
1135 &hdev
->report_enum
[HID_OUTPUT_REPORT
].report_list
;
1136 struct hid_report
*report
= list_entry(report_list
->next
,
1137 struct hid_report
, list
);
1138 __s32
*value
= report
->field
[0]->value
;
1141 value
[1] = leds
[0] ? 0xff : 0x00;
1142 value
[2] = leds
[1] ? 0xff : 0x00;
1143 value
[3] = leds
[2] ? 0xff : 0x00;
1144 value
[4] = leds
[3] ? 0xff : 0x00;
1147 hid_hw_request(hdev
, report
, HID_REQ_SET_REPORT
);
1150 static void sony_set_leds(struct sony_sc
*sc
, const __u8
*leds
, int count
)
1154 BUG_ON(count
> MAX_LEDS
);
1156 if (sc
->quirks
& BUZZ_CONTROLLER
&& count
== 4) {
1157 buzz_set_leds(sc
->hdev
, leds
);
1159 for (n
= 0; n
< count
; n
++)
1160 sc
->led_state
[n
] = leds
[n
];
1161 schedule_work(&sc
->state_worker
);
1165 static void sony_led_set_brightness(struct led_classdev
*led
,
1166 enum led_brightness value
)
1168 struct device
*dev
= led
->dev
->parent
;
1169 struct hid_device
*hdev
= container_of(dev
, struct hid_device
, dev
);
1170 struct sony_sc
*drv_data
;
1175 drv_data
= hid_get_drvdata(hdev
);
1177 hid_err(hdev
, "No device data\n");
1182 * The Sixaxis on USB will override any LED settings sent to it
1183 * and keep flashing all of the LEDs until the PS button is pressed.
1184 * Updates, even if redundant, must be always be sent to the
1185 * controller to avoid having to toggle the state of an LED just to
1186 * stop the flashing later on.
1188 force_update
= !!(drv_data
->quirks
& SIXAXIS_CONTROLLER_USB
);
1190 for (n
= 0; n
< drv_data
->led_count
; n
++) {
1191 if (led
== drv_data
->leds
[n
] && (force_update
||
1192 (value
!= drv_data
->led_state
[n
] ||
1193 drv_data
->led_delay_on
[n
] ||
1194 drv_data
->led_delay_off
[n
]))) {
1196 drv_data
->led_state
[n
] = value
;
1198 /* Setting the brightness stops the blinking */
1199 drv_data
->led_delay_on
[n
] = 0;
1200 drv_data
->led_delay_off
[n
] = 0;
1202 sony_set_leds(drv_data
, drv_data
->led_state
,
1203 drv_data
->led_count
);
1209 static enum led_brightness
sony_led_get_brightness(struct led_classdev
*led
)
1211 struct device
*dev
= led
->dev
->parent
;
1212 struct hid_device
*hdev
= container_of(dev
, struct hid_device
, dev
);
1213 struct sony_sc
*drv_data
;
1217 drv_data
= hid_get_drvdata(hdev
);
1219 hid_err(hdev
, "No device data\n");
1223 for (n
= 0; n
< drv_data
->led_count
; n
++) {
1224 if (led
== drv_data
->leds
[n
])
1225 return drv_data
->led_state
[n
];
1231 static int sony_led_blink_set(struct led_classdev
*led
, unsigned long *delay_on
,
1232 unsigned long *delay_off
)
1234 struct device
*dev
= led
->dev
->parent
;
1235 struct hid_device
*hdev
= container_of(dev
, struct hid_device
, dev
);
1236 struct sony_sc
*drv_data
= hid_get_drvdata(hdev
);
1238 __u8 new_on
, new_off
;
1241 hid_err(hdev
, "No device data\n");
1245 /* Max delay is 255 deciseconds or 2550 milliseconds */
1246 if (*delay_on
> 2550)
1248 if (*delay_off
> 2550)
1251 /* Blink at 1 Hz if both values are zero */
1252 if (!*delay_on
&& !*delay_off
)
1253 *delay_on
= *delay_off
= 500;
1255 new_on
= *delay_on
/ 10;
1256 new_off
= *delay_off
/ 10;
1258 for (n
= 0; n
< drv_data
->led_count
; n
++) {
1259 if (led
== drv_data
->leds
[n
])
1263 /* This LED is not registered on this device */
1264 if (n
>= drv_data
->led_count
)
1267 /* Don't schedule work if the values didn't change */
1268 if (new_on
!= drv_data
->led_delay_on
[n
] ||
1269 new_off
!= drv_data
->led_delay_off
[n
]) {
1270 drv_data
->led_delay_on
[n
] = new_on
;
1271 drv_data
->led_delay_off
[n
] = new_off
;
1272 schedule_work(&drv_data
->state_worker
);
1278 static void sony_leds_remove(struct sony_sc
*sc
)
1280 struct led_classdev
*led
;
1283 BUG_ON(!(sc
->quirks
& SONY_LED_SUPPORT
));
1285 for (n
= 0; n
< sc
->led_count
; n
++) {
1290 led_classdev_unregister(led
);
1297 static int sony_leds_init(struct sony_sc
*sc
)
1299 struct hid_device
*hdev
= sc
->hdev
;
1302 struct led_classdev
*led
;
1306 const char *name_fmt
;
1307 static const char * const ds4_name_str
[] = { "red", "green", "blue",
1309 __u8 initial_values
[MAX_LEDS
] = { 0 };
1310 __u8 max_brightness
[MAX_LEDS
] = { 1 };
1311 __u8 use_hw_blink
[MAX_LEDS
] = { 0 };
1313 BUG_ON(!(sc
->quirks
& SONY_LED_SUPPORT
));
1315 if (sc
->quirks
& BUZZ_CONTROLLER
) {
1318 name_len
= strlen("::buzz#");
1319 name_fmt
= "%s::buzz%d";
1320 /* Validate expected report characteristics. */
1321 if (!hid_validate_values(hdev
, HID_OUTPUT_REPORT
, 0, 0, 7))
1323 } else if (sc
->quirks
& DUALSHOCK4_CONTROLLER
) {
1324 dualshock4_set_leds_from_id(sc
->device_id
, initial_values
);
1325 initial_values
[3] = 1;
1327 memset(max_brightness
, 255, 3);
1328 use_hw_blink
[3] = 1;
1333 sixaxis_set_leds_from_id(sc
->device_id
, initial_values
);
1335 memset(use_hw_blink
, 1, 4);
1337 name_len
= strlen("::sony#");
1338 name_fmt
= "%s::sony%d";
1342 * Clear LEDs as we have no way of reading their initial state. This is
1343 * only relevant if the driver is loaded after somebody actively set the
1346 sony_set_leds(sc
, initial_values
, sc
->led_count
);
1348 name_sz
= strlen(dev_name(&hdev
->dev
)) + name_len
+ 1;
1350 for (n
= 0; n
< sc
->led_count
; n
++) {
1353 name_sz
= strlen(dev_name(&hdev
->dev
)) + strlen(ds4_name_str
[n
]) + 2;
1355 led
= kzalloc(sizeof(struct led_classdev
) + name_sz
, GFP_KERNEL
);
1357 hid_err(hdev
, "Couldn't allocate memory for LED %d\n", n
);
1362 name
= (void *)(&led
[1]);
1364 snprintf(name
, name_sz
, name_fmt
, dev_name(&hdev
->dev
),
1367 snprintf(name
, name_sz
, name_fmt
, dev_name(&hdev
->dev
), n
+ 1);
1369 led
->brightness
= initial_values
[n
];
1370 led
->max_brightness
= max_brightness
[n
];
1371 led
->brightness_get
= sony_led_get_brightness
;
1372 led
->brightness_set
= sony_led_set_brightness
;
1374 if (use_hw_blink
[n
])
1375 led
->blink_set
= sony_led_blink_set
;
1379 ret
= led_classdev_register(&hdev
->dev
, led
);
1381 hid_err(hdev
, "Failed to register LED %d\n", n
);
1391 sony_leds_remove(sc
);
1396 static void sixaxis_state_worker(struct work_struct
*work
)
1398 struct sony_sc
*sc
= container_of(work
, struct sony_sc
, state_worker
);
1400 union sixaxis_output_report_01 report
= {
1403 0x00, 0xff, 0x00, 0xff, 0x00,
1404 0x00, 0x00, 0x00, 0x00, 0x00,
1405 0xff, 0x27, 0x10, 0x00, 0x32,
1406 0xff, 0x27, 0x10, 0x00, 0x32,
1407 0xff, 0x27, 0x10, 0x00, 0x32,
1408 0xff, 0x27, 0x10, 0x00, 0x32,
1409 0x00, 0x00, 0x00, 0x00, 0x00
1413 #ifdef CONFIG_SONY_FF
1414 report
.data
.rumble
.right_motor_on
= sc
->right
? 1 : 0;
1415 report
.data
.rumble
.left_motor_force
= sc
->left
;
1418 report
.data
.leds_bitmap
|= sc
->led_state
[0] << 1;
1419 report
.data
.leds_bitmap
|= sc
->led_state
[1] << 2;
1420 report
.data
.leds_bitmap
|= sc
->led_state
[2] << 3;
1421 report
.data
.leds_bitmap
|= sc
->led_state
[3] << 4;
1423 /* Set flag for all leds off, required for 3rd party INTEC controller */
1424 if ((report
.data
.leds_bitmap
& 0x1E) == 0)
1425 report
.data
.leds_bitmap
|= 0x20;
1428 * The LEDs in the report are indexed in reverse order to their
1429 * corresponding light on the controller.
1430 * Index 0 = LED 4, index 1 = LED 3, etc...
1432 * In the case of both delay values being zero (blinking disabled) the
1433 * default report values should be used or the controller LED will be
1436 for (n
= 0; n
< 4; n
++) {
1437 if (sc
->led_delay_on
[n
] || sc
->led_delay_off
[n
]) {
1438 report
.data
.led
[3 - n
].duty_off
= sc
->led_delay_off
[n
];
1439 report
.data
.led
[3 - n
].duty_on
= sc
->led_delay_on
[n
];
1443 hid_hw_raw_request(sc
->hdev
, report
.data
.report_id
, report
.buf
,
1444 sizeof(report
), HID_OUTPUT_REPORT
, HID_REQ_SET_REPORT
);
1447 static void dualshock4_state_worker(struct work_struct
*work
)
1449 struct sony_sc
*sc
= container_of(work
, struct sony_sc
, state_worker
);
1450 struct hid_device
*hdev
= sc
->hdev
;
1453 __u8 buf
[78] = { 0 };
1455 if (sc
->quirks
& DUALSHOCK4_CONTROLLER_USB
) {
1466 #ifdef CONFIG_SONY_FF
1467 buf
[offset
++] = sc
->right
;
1468 buf
[offset
++] = sc
->left
;
1473 /* LED 3 is the global control */
1474 if (sc
->led_state
[3]) {
1475 buf
[offset
++] = sc
->led_state
[0];
1476 buf
[offset
++] = sc
->led_state
[1];
1477 buf
[offset
++] = sc
->led_state
[2];
1482 /* If both delay values are zero the DualShock 4 disables blinking. */
1483 buf
[offset
++] = sc
->led_delay_on
[3];
1484 buf
[offset
++] = sc
->led_delay_off
[3];
1486 if (sc
->quirks
& DUALSHOCK4_CONTROLLER_USB
)
1487 hid_hw_output_report(hdev
, buf
, 32);
1489 hid_hw_raw_request(hdev
, 0x11, buf
, 78,
1490 HID_OUTPUT_REPORT
, HID_REQ_SET_REPORT
);
1493 #ifdef CONFIG_SONY_FF
1494 static int sony_play_effect(struct input_dev
*dev
, void *data
,
1495 struct ff_effect
*effect
)
1497 struct hid_device
*hid
= input_get_drvdata(dev
);
1498 struct sony_sc
*sc
= hid_get_drvdata(hid
);
1500 if (effect
->type
!= FF_RUMBLE
)
1503 sc
->left
= effect
->u
.rumble
.strong_magnitude
/ 256;
1504 sc
->right
= effect
->u
.rumble
.weak_magnitude
/ 256;
1506 schedule_work(&sc
->state_worker
);
1510 static int sony_init_ff(struct sony_sc
*sc
)
1512 struct hid_input
*hidinput
= list_entry(sc
->hdev
->inputs
.next
,
1513 struct hid_input
, list
);
1514 struct input_dev
*input_dev
= hidinput
->input
;
1516 input_set_capability(input_dev
, EV_FF
, FF_RUMBLE
);
1517 return input_ff_create_memless(input_dev
, NULL
, sony_play_effect
);
1521 static int sony_init_ff(struct sony_sc
*sc
)
1528 static int sony_battery_get_property(struct power_supply
*psy
,
1529 enum power_supply_property psp
,
1530 union power_supply_propval
*val
)
1532 struct sony_sc
*sc
= container_of(psy
, struct sony_sc
, battery
);
1533 unsigned long flags
;
1535 u8 battery_charging
, battery_capacity
, cable_state
;
1537 spin_lock_irqsave(&sc
->lock
, flags
);
1538 battery_charging
= sc
->battery_charging
;
1539 battery_capacity
= sc
->battery_capacity
;
1540 cable_state
= sc
->cable_state
;
1541 spin_unlock_irqrestore(&sc
->lock
, flags
);
1544 case POWER_SUPPLY_PROP_PRESENT
:
1547 case POWER_SUPPLY_PROP_SCOPE
:
1548 val
->intval
= POWER_SUPPLY_SCOPE_DEVICE
;
1550 case POWER_SUPPLY_PROP_CAPACITY
:
1551 val
->intval
= battery_capacity
;
1553 case POWER_SUPPLY_PROP_STATUS
:
1554 if (battery_charging
)
1555 val
->intval
= POWER_SUPPLY_STATUS_CHARGING
;
1557 if (battery_capacity
== 100 && cable_state
)
1558 val
->intval
= POWER_SUPPLY_STATUS_FULL
;
1560 val
->intval
= POWER_SUPPLY_STATUS_DISCHARGING
;
1569 static int sony_battery_probe(struct sony_sc
*sc
)
1571 struct hid_device
*hdev
= sc
->hdev
;
1575 * Set the default battery level to 100% to avoid low battery warnings
1576 * if the battery is polled before the first device report is received.
1578 sc
->battery_capacity
= 100;
1580 sc
->battery
.properties
= sony_battery_props
;
1581 sc
->battery
.num_properties
= ARRAY_SIZE(sony_battery_props
);
1582 sc
->battery
.get_property
= sony_battery_get_property
;
1583 sc
->battery
.type
= POWER_SUPPLY_TYPE_BATTERY
;
1584 sc
->battery
.use_for_apm
= 0;
1585 sc
->battery
.name
= kasprintf(GFP_KERNEL
, "sony_controller_battery_%pMR",
1587 if (!sc
->battery
.name
)
1590 ret
= power_supply_register(&hdev
->dev
, &sc
->battery
);
1592 hid_err(hdev
, "Unable to register battery device\n");
1596 power_supply_powers(&sc
->battery
, &hdev
->dev
);
1600 kfree(sc
->battery
.name
);
1601 sc
->battery
.name
= NULL
;
1605 static void sony_battery_remove(struct sony_sc
*sc
)
1607 if (!sc
->battery
.name
)
1610 power_supply_unregister(&sc
->battery
);
1611 kfree(sc
->battery
.name
);
1612 sc
->battery
.name
= NULL
;
1615 static int sony_register_touchpad(struct sony_sc
*sc
, int touch_count
,
1618 struct hid_input
*hidinput
= list_entry(sc
->hdev
->inputs
.next
,
1619 struct hid_input
, list
);
1620 struct input_dev
*input_dev
= hidinput
->input
;
1623 ret
= input_mt_init_slots(input_dev
, touch_count
, 0);
1625 hid_err(sc
->hdev
, "Unable to initialize multi-touch slots\n");
1629 input_set_abs_params(input_dev
, ABS_MT_POSITION_X
, 0, w
, 0, 0);
1630 input_set_abs_params(input_dev
, ABS_MT_POSITION_Y
, 0, h
, 0, 0);
1636 * If a controller is plugged in via USB while already connected via Bluetooth
1637 * it will show up as two devices. A global list of connected controllers and
1638 * their MAC addresses is maintained to ensure that a device is only connected
1641 static int sony_check_add_dev_list(struct sony_sc
*sc
)
1643 struct sony_sc
*entry
;
1644 unsigned long flags
;
1647 spin_lock_irqsave(&sony_dev_list_lock
, flags
);
1649 list_for_each_entry(entry
, &sony_device_list
, list_node
) {
1650 ret
= memcmp(sc
->mac_address
, entry
->mac_address
,
1651 sizeof(sc
->mac_address
));
1654 hid_info(sc
->hdev
, "controller with MAC address %pMR already connected\n",
1661 list_add(&(sc
->list_node
), &sony_device_list
);
1664 spin_unlock_irqrestore(&sony_dev_list_lock
, flags
);
1668 static void sony_remove_dev_list(struct sony_sc
*sc
)
1670 unsigned long flags
;
1672 if (sc
->list_node
.next
) {
1673 spin_lock_irqsave(&sony_dev_list_lock
, flags
);
1674 list_del(&(sc
->list_node
));
1675 spin_unlock_irqrestore(&sony_dev_list_lock
, flags
);
1679 static int sony_get_bt_devaddr(struct sony_sc
*sc
)
1683 /* HIDP stores the device MAC address as a string in the uniq field. */
1684 ret
= strlen(sc
->hdev
->uniq
);
1688 ret
= sscanf(sc
->hdev
->uniq
,
1689 "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
1690 &sc
->mac_address
[5], &sc
->mac_address
[4], &sc
->mac_address
[3],
1691 &sc
->mac_address
[2], &sc
->mac_address
[1], &sc
->mac_address
[0]);
1699 static int sony_check_add(struct sony_sc
*sc
)
1703 if ((sc
->quirks
& DUALSHOCK4_CONTROLLER_BT
) ||
1704 (sc
->quirks
& SIXAXIS_CONTROLLER_BT
)) {
1706 * sony_get_bt_devaddr() attempts to parse the Bluetooth MAC
1707 * address from the uniq string where HIDP stores it.
1708 * As uniq cannot be guaranteed to be a MAC address in all cases
1709 * a failure of this function should not prevent the connection.
1711 if (sony_get_bt_devaddr(sc
) < 0) {
1712 hid_warn(sc
->hdev
, "UNIQ does not contain a MAC address; duplicate check skipped\n");
1715 } else if (sc
->quirks
& DUALSHOCK4_CONTROLLER_USB
) {
1719 * The MAC address of a DS4 controller connected via USB can be
1720 * retrieved with feature report 0x81. The address begins at
1723 ret
= hid_hw_raw_request(sc
->hdev
, 0x81, buf
, sizeof(buf
),
1724 HID_FEATURE_REPORT
, HID_REQ_GET_REPORT
);
1727 hid_err(sc
->hdev
, "failed to retrieve feature report 0x81 with the DualShock 4 MAC address\n");
1728 return ret
< 0 ? ret
: -EINVAL
;
1731 memcpy(sc
->mac_address
, &buf
[1], sizeof(sc
->mac_address
));
1732 } else if (sc
->quirks
& SIXAXIS_CONTROLLER_USB
) {
1736 * The MAC address of a Sixaxis controller connected via USB can
1737 * be retrieved with feature report 0xf2. The address begins at
1740 ret
= hid_hw_raw_request(sc
->hdev
, 0xf2, buf
, sizeof(buf
),
1741 HID_FEATURE_REPORT
, HID_REQ_GET_REPORT
);
1744 hid_err(sc
->hdev
, "failed to retrieve feature report 0xf2 with the Sixaxis MAC address\n");
1745 return ret
< 0 ? ret
: -EINVAL
;
1749 * The Sixaxis device MAC in the report is big-endian and must
1752 for (n
= 0; n
< 6; n
++)
1753 sc
->mac_address
[5-n
] = buf
[4+n
];
1758 return sony_check_add_dev_list(sc
);
1761 static int sony_set_device_id(struct sony_sc
*sc
)
1766 * Only DualShock 4 or Sixaxis controllers get an id.
1767 * All others are set to -1.
1769 if ((sc
->quirks
& SIXAXIS_CONTROLLER
) ||
1770 (sc
->quirks
& DUALSHOCK4_CONTROLLER
)) {
1771 ret
= ida_simple_get(&sony_device_id_allocator
, 0, 0,
1777 sc
->device_id
= ret
;
1785 static void sony_release_device_id(struct sony_sc
*sc
)
1787 if (sc
->device_id
>= 0) {
1788 ida_simple_remove(&sony_device_id_allocator
, sc
->device_id
);
1793 static inline void sony_init_work(struct sony_sc
*sc
,
1794 void (*worker
)(struct work_struct
*))
1796 if (!sc
->worker_initialized
)
1797 INIT_WORK(&sc
->state_worker
, worker
);
1799 sc
->worker_initialized
= 1;
1802 static inline void sony_cancel_work_sync(struct sony_sc
*sc
)
1804 if (sc
->worker_initialized
)
1805 cancel_work_sync(&sc
->state_worker
);
1808 static int sony_probe(struct hid_device
*hdev
, const struct hid_device_id
*id
)
1811 unsigned long quirks
= id
->driver_data
;
1813 unsigned int connect_mask
= HID_CONNECT_DEFAULT
;
1815 sc
= devm_kzalloc(&hdev
->dev
, sizeof(*sc
), GFP_KERNEL
);
1817 hid_err(hdev
, "can't alloc sony descriptor\n");
1821 sc
->quirks
= quirks
;
1822 hid_set_drvdata(hdev
, sc
);
1825 ret
= hid_parse(hdev
);
1827 hid_err(hdev
, "parse failed\n");
1831 if (sc
->quirks
& VAIO_RDESC_CONSTANT
)
1832 connect_mask
|= HID_CONNECT_HIDDEV_FORCE
;
1833 else if (sc
->quirks
& SIXAXIS_CONTROLLER_USB
)
1834 connect_mask
|= HID_CONNECT_HIDDEV_FORCE
;
1835 else if (sc
->quirks
& SIXAXIS_CONTROLLER_BT
)
1836 connect_mask
|= HID_CONNECT_HIDDEV_FORCE
;
1838 ret
= hid_hw_start(hdev
, connect_mask
);
1840 hid_err(hdev
, "hw start failed\n");
1844 ret
= sony_set_device_id(sc
);
1846 hid_err(hdev
, "failed to allocate the device id\n");
1850 if (sc
->quirks
& SIXAXIS_CONTROLLER_USB
) {
1852 * The Sony Sixaxis does not handle HID Output Reports on the
1853 * Interrupt EP like it could, so we need to force HID Output
1854 * Reports to use HID_REQ_SET_REPORT on the Control EP.
1856 * There is also another issue about HID Output Reports via USB,
1857 * the Sixaxis does not want the report_id as part of the data
1858 * packet, so we have to discard buf[0] when sending the actual
1859 * control message, even for numbered reports, humpf!
1861 hdev
->quirks
|= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP
;
1862 hdev
->quirks
|= HID_QUIRK_SKIP_OUTPUT_REPORT_ID
;
1863 ret
= sixaxis_set_operational_usb(hdev
);
1864 sony_init_work(sc
, sixaxis_state_worker
);
1865 } else if (sc
->quirks
& SIXAXIS_CONTROLLER_BT
) {
1867 * The Sixaxis wants output reports sent on the ctrl endpoint
1868 * when connected via Bluetooth.
1870 hdev
->quirks
|= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP
;
1871 ret
= sixaxis_set_operational_bt(hdev
);
1872 sony_init_work(sc
, sixaxis_state_worker
);
1873 } else if (sc
->quirks
& DUALSHOCK4_CONTROLLER
) {
1874 if (sc
->quirks
& DUALSHOCK4_CONTROLLER_BT
) {
1876 * The DualShock 4 wants output reports sent on the ctrl
1877 * endpoint when connected via Bluetooth.
1879 hdev
->quirks
|= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP
;
1880 ret
= dualshock4_set_operational_bt(hdev
);
1882 hid_err(hdev
, "failed to set the Dualshock 4 operational mode\n");
1887 * The Dualshock 4 touchpad supports 2 touches and has a
1888 * resolution of 1920x940.
1890 ret
= sony_register_touchpad(sc
, 2, 1920, 940);
1894 sony_init_work(sc
, dualshock4_state_worker
);
1902 ret
= sony_check_add(sc
);
1906 if (sc
->quirks
& SONY_LED_SUPPORT
) {
1907 ret
= sony_leds_init(sc
);
1912 if (sc
->quirks
& SONY_BATTERY_SUPPORT
) {
1913 ret
= sony_battery_probe(sc
);
1917 /* Open the device to receive reports with battery info */
1918 ret
= hid_hw_open(hdev
);
1920 hid_err(hdev
, "hw open failed\n");
1925 if (sc
->quirks
& SONY_FF_SUPPORT
) {
1926 ret
= sony_init_ff(sc
);
1935 if (sc
->quirks
& SONY_LED_SUPPORT
)
1936 sony_leds_remove(sc
);
1937 if (sc
->quirks
& SONY_BATTERY_SUPPORT
)
1938 sony_battery_remove(sc
);
1939 sony_cancel_work_sync(sc
);
1940 sony_remove_dev_list(sc
);
1941 sony_release_device_id(sc
);
1946 static void sony_remove(struct hid_device
*hdev
)
1948 struct sony_sc
*sc
= hid_get_drvdata(hdev
);
1950 if (sc
->quirks
& SONY_LED_SUPPORT
)
1951 sony_leds_remove(sc
);
1953 if (sc
->quirks
& SONY_BATTERY_SUPPORT
) {
1955 sony_battery_remove(sc
);
1958 sony_cancel_work_sync(sc
);
1960 sony_remove_dev_list(sc
);
1962 sony_release_device_id(sc
);
1967 static const struct hid_device_id sony_devices
[] = {
1968 { HID_USB_DEVICE(USB_VENDOR_ID_SONY
, USB_DEVICE_ID_SONY_PS3_CONTROLLER
),
1969 .driver_data
= SIXAXIS_CONTROLLER_USB
},
1970 { HID_USB_DEVICE(USB_VENDOR_ID_SONY
, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER
),
1971 .driver_data
= SIXAXIS_CONTROLLER_USB
},
1972 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY
, USB_DEVICE_ID_SONY_PS3_CONTROLLER
),
1973 .driver_data
= SIXAXIS_CONTROLLER_BT
},
1974 { HID_USB_DEVICE(USB_VENDOR_ID_SONY
, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE
),
1975 .driver_data
= VAIO_RDESC_CONSTANT
},
1976 { HID_USB_DEVICE(USB_VENDOR_ID_SONY
, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE
),
1977 .driver_data
= VAIO_RDESC_CONSTANT
},
1978 /* Wired Buzz Controller. Reported as Sony Hub from its USB ID and as
1979 * Logitech joystick from the device descriptor. */
1980 { HID_USB_DEVICE(USB_VENDOR_ID_SONY
, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER
),
1981 .driver_data
= BUZZ_CONTROLLER
},
1982 { HID_USB_DEVICE(USB_VENDOR_ID_SONY
, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER
),
1983 .driver_data
= BUZZ_CONTROLLER
},
1984 /* PS3 BD Remote Control */
1985 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY
, USB_DEVICE_ID_SONY_PS3_BDREMOTE
),
1986 .driver_data
= PS3REMOTE
},
1987 /* Logitech Harmony Adapter for PS3 */
1988 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH
, USB_DEVICE_ID_LOGITECH_HARMONY_PS3
),
1989 .driver_data
= PS3REMOTE
},
1990 /* Sony Dualshock 4 controllers for PS4 */
1991 { HID_USB_DEVICE(USB_VENDOR_ID_SONY
, USB_DEVICE_ID_SONY_PS4_CONTROLLER
),
1992 .driver_data
= DUALSHOCK4_CONTROLLER_USB
},
1993 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY
, USB_DEVICE_ID_SONY_PS4_CONTROLLER
),
1994 .driver_data
= DUALSHOCK4_CONTROLLER_BT
},
1997 MODULE_DEVICE_TABLE(hid
, sony_devices
);
1999 static struct hid_driver sony_driver
= {
2001 .id_table
= sony_devices
,
2002 .input_mapping
= sony_mapping
,
2003 .probe
= sony_probe
,
2004 .remove
= sony_remove
,
2005 .report_fixup
= sony_report_fixup
,
2006 .raw_event
= sony_raw_event
2009 static int __init
sony_init(void)
2011 dbg_hid("Sony:%s\n", __func__
);
2013 return hid_register_driver(&sony_driver
);
2016 static void __exit
sony_exit(void)
2018 dbg_hid("Sony:%s\n", __func__
);
2020 ida_destroy(&sony_device_id_allocator
);
2021 hid_unregister_driver(&sony_driver
);
2023 module_init(sony_init
);
2024 module_exit(sony_exit
);
2026 MODULE_LICENSE("GPL");