drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config SENSORS_ABITUGURU
  32         tristate "Abit uGuru"
  33         depends on EXPERIMENTAL
  34         help
  35           If you say yes here you get support for the Abit uGuru chips
  36           sensor part. The voltage and frequency control parts of the Abit
  37           uGuru are not supported. The Abit uGuru chip can be found on Abit
  38           uGuru featuring motherboards (most modern Abit motherboards).
  39
  40           This driver can also be built as a module.  If so, the module
  41           will be called abituguru.
  42
  43 config SENSORS_AD7418
  44         tristate "Analog Devices AD7416, AD7417 and AD7418"
  45         depends on I2C && EXPERIMENTAL
  46         help
  47           If you say yes here you get support for the Analog Devices
  48           AD7416, AD7417 and AD7418 temperature monitoring chips.
  49
  50           This driver can also be built as a module. If so, the module
  51           will be called ad7418.
  52
  53 config SENSORS_ADM1021
  54         tristate "Analog Devices ADM1021 and compatibles"
  55         depends on I2C
  56         help
  57           If you say yes here you get support for Analog Devices ADM1021
  58           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  59           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
  60           and the XEON processor built-in sensor.
  61
  62           This driver can also be built as a module.  If so, the module
  63           will be called adm1021.
  64
  65 config SENSORS_ADM1025
  66         tristate "Analog Devices ADM1025 and compatibles"
  67         depends on I2C
  68         select HWMON_VID
  69         help
  70           If you say yes here you get support for Analog Devices ADM1025
  71           and Philips NE1619 sensor chips.
  72
  73           This driver can also be built as a module.  If so, the module
  74           will be called adm1025.
  75
  76 config SENSORS_ADM1026
  77         tristate "Analog Devices ADM1026 and compatibles"
  78         depends on I2C && EXPERIMENTAL
  79         select HWMON_VID
  80         help
  81           If you say yes here you get support for Analog Devices ADM1026
  82           sensor chip.
  83
  84           This driver can also be built as a module.  If so, the module
  85           will be called adm1026.
  86
  87 config SENSORS_ADM1029
  88         tristate "Analog Devices ADM1029"
  89         depends on I2C && EXPERIMENTAL
  90         help
  91           If you say yes here you get support for Analog Devices ADM1029
  92           sensor chip.
  93           Very rare chip, please let us know you use it.
  94
  95           This driver can also be built as a module.  If so, the module
  96           will be called adm1029.
  97
  98 config SENSORS_ADM1031
  99         tristate "Analog Devices ADM1031 and compatibles"
 100         depends on I2C && EXPERIMENTAL
 101         help
 102           If you say yes here you get support for Analog Devices ADM1031
 103           and ADM1030 sensor chips.
 104
 105           This driver can also be built as a module.  If so, the module
 106           will be called adm1031.
 107
 108 config SENSORS_ADM9240
 109         tristate "Analog Devices ADM9240 and compatibles"
 110         depends on I2C && EXPERIMENTAL
 111         select HWMON_VID
 112         help
 113           If you say yes here you get support for Analog Devices ADM9240,
 114           Dallas DS1780, National Semiconductor LM81 sensor chips.
 115
 116           This driver can also be built as a module.  If so, the module
 117           will be called adm9240.
 118
 119 config SENSORS_K8TEMP
 120         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 121         depends on X86 && PCI && EXPERIMENTAL
 122         help
 123           If you say yes here you get support for the temperature
 124           sensor(s) inside your CPU. Supported is whole AMD K8
 125           microarchitecture. Please note that you will need at least
 126           lm-sensors 2.10.1 for proper userspace support.
 127
 128           This driver can also be built as a module.  If so, the module
 129           will be called k8temp.
 130
 131 config SENSORS_AMS
 132         tristate "Apple Motion Sensor driver"
 133         depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
 134         help
 135           Support for the motion sensor included in PowerBooks. Includes
 136           implementations for PMU and I2C.
 137
 138           This driver can also be built as a module. If so, the module
 139           will be called ams.
 140
 141 config SENSORS_AMS_PMU
 142         bool "PMU variant"
 143         depends on SENSORS_AMS && ADB_PMU
 144         default y
 145         help
 146           PMU variant of motion sensor, found in late 2005 PowerBooks.
 147
 148 config SENSORS_AMS_I2C
 149         bool "I2C variant"
 150         depends on SENSORS_AMS && I2C
 151         default y
 152         help
 153           I2C variant of motion sensor, found in early 2005 PowerBooks and
 154           iBooks.
 155
 156 config SENSORS_ASB100
 157         tristate "Asus ASB100 Bach"
 158         depends on I2C && EXPERIMENTAL
 159         select HWMON_VID
 160         help
 161           If you say yes here you get support for the ASB100 Bach sensor
 162           chip found on some Asus mainboards.
 163
 164           This driver can also be built as a module.  If so, the module
 165           will be called asb100.
 166
 167 config SENSORS_ATXP1
 168         tristate "Attansic ATXP1 VID controller"
 169         depends on I2C && EXPERIMENTAL
 170         select HWMON_VID
 171         help
 172           If you say yes here you get support for the Attansic ATXP1 VID
 173           controller.
 174
 175           If your board have such a chip, you are able to control your CPU
 176           core and other voltages.
 177
 178           This driver can also be built as a module.  If so, the module
 179           will be called atxp1.
 180
 181 config SENSORS_DS1621
 182         tristate "Dallas Semiconductor DS1621 and DS1625"
 183         depends on I2C
 184         help
 185           If you say yes here you get support for Dallas Semiconductor
 186           DS1621 and DS1625 sensor chips.
 187
 188           This driver can also be built as a module.  If so, the module
 189           will be called ds1621.
 190
 191 config SENSORS_F71805F
 192         tristate "Fintek F71805F/FG and F71872F/FG"
 193         depends on EXPERIMENTAL
 194         help
 195           If you say yes here you get support for hardware monitoring
 196           features of the Fintek F71805F/FG and F71872F/FG Super-I/O
 197           chips.
 198
 199           This driver can also be built as a module.  If so, the module
 200           will be called f71805f.
 201
 202 config SENSORS_FSCHER
 203         tristate "FSC Hermes"
 204         depends on I2C
 205         help
 206           If you say yes here you get support for Fujitsu Siemens
 207           Computers Hermes sensor chips.
 208
 209           This driver can also be built as a module.  If so, the module
 210           will be called fscher.
 211
 212 config SENSORS_FSCPOS
 213         tristate "FSC Poseidon"
 214         depends on I2C
 215         help
 216           If you say yes here you get support for Fujitsu Siemens
 217           Computers Poseidon sensor chips.
 218
 219           This driver can also be built as a module.  If so, the module
 220           will be called fscpos.
 221
 222 config SENSORS_GL518SM
 223         tristate "Genesys Logic GL518SM"
 224         depends on I2C
 225         help
 226           If you say yes here you get support for Genesys Logic GL518SM
 227           sensor chips.
 228
 229           This driver can also be built as a module.  If so, the module
 230           will be called gl518sm.
 231
 232 config SENSORS_GL520SM
 233         tristate "Genesys Logic GL520SM"
 234         depends on I2C
 235         select HWMON_VID
 236         help
 237           If you say yes here you get support for Genesys Logic GL520SM
 238           sensor chips.
 239
 240           This driver can also be built as a module.  If so, the module
 241           will be called gl520sm.
 242
 243 config SENSORS_CORETEMP
 244         tristate "Intel Core (2) Duo/Solo temperature sensor"
 245         depends on X86 && EXPERIMENTAL
 246         help
 247           If you say yes here you get support for the temperature
 248           sensor inside your CPU. Supported all are all known variants
 249           of Intel Core family.
 250
 251 config SENSORS_IT87
 252         tristate "ITE IT87xx and compatibles"
 253         select HWMON_VID
 254         help
 255           If you say yes here you get support for ITE IT8705F, IT8712F,
 256           IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
 257
 258           This driver can also be built as a module.  If so, the module
 259           will be called it87.
 260
 261 config SENSORS_LM63
 262         tristate "National Semiconductor LM63"
 263         depends on I2C
 264         help
 265           If you say yes here you get support for the National Semiconductor
 266           LM63 remote diode digital temperature sensor with integrated fan
 267           control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
 268           motherboard, among others.
 269
 270           This driver can also be built as a module.  If so, the module
 271           will be called lm63.
 272
 273 config SENSORS_LM70
 274         tristate "National Semiconductor LM70"
 275         depends on SPI_MASTER && EXPERIMENTAL
 276         help
 277           If you say yes here you get support for the National Semiconductor
 278           LM70 digital temperature sensor chip.
 279
 280           This driver can also be built as a module.  If so, the module
 281           will be called lm70.
 282
 283 config SENSORS_LM75
 284         tristate "National Semiconductor LM75 and compatibles"
 285         depends on I2C
 286         help
 287           If you say yes here you get support for National Semiconductor LM75
 288           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
 289           9-bit precision mode), and TelCom (now Microchip) TCN75.
 290
 291           The DS75 and DS1775 in 10- to 12-bit precision modes will require
 292           a force module parameter. The driver will not handle the extra
 293           precision anyhow.
 294
 295           This driver can also be built as a module.  If so, the module
 296           will be called lm75.
 297
 298 config SENSORS_LM77
 299         tristate "National Semiconductor LM77"
 300         depends on I2C
 301         help
 302           If you say yes here you get support for National Semiconductor LM77
 303           sensor chips.
 304
 305           This driver can also be built as a module.  If so, the module
 306           will be called lm77.
 307
 308 config SENSORS_LM78
 309         tristate "National Semiconductor LM78 and compatibles"
 310         depends on I2C
 311         select HWMON_VID
 312         help
 313           If you say yes here you get support for National Semiconductor LM78,
 314           LM78-J and LM79.
 315
 316           This driver can also be built as a module.  If so, the module
 317           will be called lm78.
 318
 319 config SENSORS_LM80
 320         tristate "National Semiconductor LM80"
 321         depends on I2C && EXPERIMENTAL
 322         help
 323           If you say yes here you get support for National Semiconductor
 324           LM80 sensor chips.
 325
 326           This driver can also be built as a module.  If so, the module
 327           will be called lm80.
 328
 329 config SENSORS_LM83
 330         tristate "National Semiconductor LM83 and compatibles"
 331         depends on I2C
 332         help
 333           If you say yes here you get support for National Semiconductor
 334           LM82 and LM83 sensor chips.
 335
 336           This driver can also be built as a module.  If so, the module
 337           will be called lm83.
 338
 339 config SENSORS_LM85
 340         tristate "National Semiconductor LM85 and compatibles"
 341         depends on I2C && EXPERIMENTAL
 342         select HWMON_VID
 343         help
 344           If you say yes here you get support for National Semiconductor LM85
 345           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
 346
 347           This driver can also be built as a module.  If so, the module
 348           will be called lm85.
 349
 350 config SENSORS_LM87
 351         tristate "National Semiconductor LM87"
 352         depends on I2C
 353         select HWMON_VID
 354         help
 355           If you say yes here you get support for National Semiconductor LM87
 356           sensor chips.
 357
 358           This driver can also be built as a module.  If so, the module
 359           will be called lm87.
 360
 361 config SENSORS_LM90
 362         tristate "National Semiconductor LM90 and compatibles"
 363         depends on I2C
 364         help
 365           If you say yes here you get support for National Semiconductor LM90,
 366           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
 367           MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
 368
 369           The Analog Devices ADT7461 sensor chip is also supported, but only
 370           if found in ADM1032 compatibility mode.
 371
 372           This driver can also be built as a module.  If so, the module
 373           will be called lm90.
 374
 375 config SENSORS_LM92
 376         tristate "National Semiconductor LM92 and compatibles"
 377         depends on I2C
 378         help
 379           If you say yes here you get support for National Semiconductor LM92
 380           and Maxim MAX6635 sensor chips.
 381
 382           This driver can also be built as a module.  If so, the module
 383           will be called lm92.
 384
 385 config SENSORS_MAX1619
 386         tristate "Maxim MAX1619 sensor chip"
 387         depends on I2C
 388         help
 389           If you say yes here you get support for MAX1619 sensor chip.
 390
 391           This driver can also be built as a module.  If so, the module
 392           will be called max1619.
 393
 394 config SENSORS_MAX6650
 395         tristate "Maxim MAX6650 sensor chip"
 396         depends on I2C && EXPERIMENTAL
 397         help
 398           If you say yes here you get support for the MAX6650 / MAX6651
 399           sensor chips.
 400
 401           This driver can also be built as a module.  If so, the module
 402           will be called max6650.
 403
 404 config SENSORS_PC87360
 405         tristate "National Semiconductor PC87360 family"
 406         select HWMON_VID
 407         help
 408           If you say yes here you get access to the hardware monitoring
 409           functions of the National Semiconductor PC8736x Super-I/O chips.
 410           The PC87360, PC87363 and PC87364 only have fan monitoring and
 411           control.  The PC87365 and PC87366 additionally have voltage and
 412           temperature monitoring.
 413
 414           This driver can also be built as a module.  If so, the module
 415           will be called pc87360.
 416
 417 config SENSORS_PC87427
 418         tristate "National Semiconductor PC87427"
 419         depends on EXPERIMENTAL
 420         help
 421           If you say yes here you get access to the hardware monitoring
 422           functions of the National Semiconductor PC87427 Super-I/O chip.
 423           The chip has two distinct logical devices, one for fan speed
 424           monitoring and control, and one for voltage and temperature
 425           monitoring. Only fan speed monitoring is supported right now.
 426
 427           This driver can also be built as a module.  If so, the module
 428           will be called pc87427.
 429
 430 config SENSORS_SIS5595
 431         tristate "Silicon Integrated Systems Corp. SiS5595"
 432         depends on PCI
 433         help
 434           If you say yes here you get support for the integrated sensors in
 435           SiS5595 South Bridges.
 436
 437           This driver can also be built as a module.  If so, the module
 438           will be called sis5595.
 439
 440 config SENSORS_DME1737
 441         tristate "SMSC DME1737 and compatibles"
 442         depends on I2C && EXPERIMENTAL
 443         select HWMON_VID
 444         help
 445           If you say yes here you get support for the hardware monitoring
 446           and fan control features of the SMSC DME1737 (and compatibles
 447           like the Asus A8000) Super-I/O chip.
 448
 449           This driver can also be built as a module.  If so, the module
 450           will be called dme1737.
 451
 452 config SENSORS_SMSC47M1
 453         tristate "SMSC LPC47M10x and compatibles"
 454         help
 455           If you say yes here you get support for the integrated fan
 456           monitoring and control capabilities of the SMSC LPC47B27x,
 457           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 458           LPC47M192, LPC47M292 and LPC47M997 chips.
 459
 460           The temperature and voltage sensor features of the LPC47M15x,
 461           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 462           driver, select also "SMSC LPC47M192 and compatibles" below for
 463           those.
 464
 465           This driver can also be built as a module.  If so, the module
 466           will be called smsc47m1.
 467
 468 config SENSORS_SMSC47M192
 469         tristate "SMSC LPC47M192 and compatibles"
 470         depends on I2C && EXPERIMENTAL
 471         select HWMON_VID
 472         help
 473           If you say yes here you get support for the temperature and
 474           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
 475           and LPC47M997 chips.
 476
 477           The fan monitoring and control capabilities of these chips
 478           are supported by another driver, select
 479           "SMSC LPC47M10x and compatibles" above. You need both drivers
 480           if you want fan control and voltage/temperature sensor support.
 481
 482           This driver can also be built as a module.  If so, the module
 483           will be called smsc47m192.
 484
 485 config SENSORS_SMSC47B397
 486         tristate "SMSC LPC47B397-NC"
 487         depends on EXPERIMENTAL
 488         help
 489           If you say yes here you get support for the SMSC LPC47B397-NC
 490           sensor chip.
 491
 492           This driver can also be built as a module.  If so, the module
 493           will be called smsc47b397.
 494
 495 config SENSORS_VIA686A
 496         tristate "VIA686A"
 497         depends on PCI
 498         help
 499           If you say yes here you get support for the integrated sensors in
 500           Via 686A/B South Bridges.
 501
 502           This driver can also be built as a module.  If so, the module
 503           will be called via686a.
 504
 505 config SENSORS_VT1211
 506         tristate "VIA VT1211"
 507         depends on EXPERIMENTAL
 508         select HWMON_VID
 509         help
 510           If you say yes here then you get support for hardware monitoring
 511           features of the VIA VT1211 Super-I/O chip.
 512
 513           This driver can also be built as a module.  If so, the module
 514           will be called vt1211.
 515
 516 config SENSORS_VT8231
 517         tristate "VIA VT8231"
 518         depends on PCI
 519         select HWMON_VID
 520         help
 521           If you say yes here then you get support for the integrated sensors
 522           in the VIA VT8231 device.
 523
 524           This driver can also be built as a module.  If so, the module
 525           will be called vt8231.
 526
 527 config SENSORS_W83781D
 528         tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
 529         depends on I2C
 530         select HWMON_VID
 531         help
 532           If you say yes here you get support for the Winbond W8378x series
 533           of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
 534           and the similar Asus AS99127F.
 535
 536           This driver can also be built as a module.  If so, the module
 537           will be called w83781d.
 538
 539 config SENSORS_W83791D
 540         tristate "Winbond W83791D"
 541         depends on I2C && EXPERIMENTAL
 542         select HWMON_VID
 543         help
 544           If you say yes here you get support for the Winbond W83791D chip.
 545
 546           This driver can also be built as a module.  If so, the module
 547           will be called w83791d.
 548
 549 config SENSORS_W83792D
 550         tristate "Winbond W83792D"
 551         depends on I2C && EXPERIMENTAL
 552         help
 553           If you say yes here you get support for the Winbond W83792D chip.
 554
 555           This driver can also be built as a module.  If so, the module
 556           will be called w83792d.
 557
 558 config SENSORS_W83793
 559         tristate "Winbond W83793"
 560         depends on I2C && EXPERIMENTAL
 561         select HWMON_VID
 562         help
 563           If you say yes here you get support for the Winbond W83793
 564           hardware monitoring chip.
 565
 566           This driver can also be built as a module.  If so, the module
 567           will be called w83793.
 568
 569 config SENSORS_W83L785TS
 570         tristate "Winbond W83L785TS-S"
 571         depends on I2C && EXPERIMENTAL
 572         help
 573           If you say yes here you get support for the Winbond W83L785TS-S
 574           sensor chip, which is used on the Asus A7N8X, among other
 575           motherboards.
 576
 577           This driver can also be built as a module.  If so, the module
 578           will be called w83l785ts.
 579
 580 config SENSORS_W83627HF
 581         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
 582         select HWMON_VID
 583         help
 584           If you say yes here you get support for the Winbond W836X7 series
 585           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
 586           W83697HF.
 587
 588           This driver can also be built as a module.  If so, the module
 589           will be called w83627hf.
 590
 591 config SENSORS_W83627EHF
 592         tristate "Winbond W83627EHF"
 593         depends on I2C && EXPERIMENTAL
 594         select I2C_ISA
 595         help
 596           If you say yes here you get preliminary support for the hardware
 597           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
 598           Only fan and temperature inputs are supported at the moment, while
 599           the chip does much more than that.
 600
 601           This driver also supports the W83627EHG, which is the lead-free
 602           version of the W83627EHF.
 603
 604           This driver can also be built as a module.  If so, the module
 605           will be called w83627ehf.
 606
 607 config SENSORS_HDAPS
 608         tristate "IBM Hard Drive Active Protection System (hdaps)"
 609         depends on INPUT && X86
 610         default n
 611         help
 612           This driver provides support for the IBM Hard Drive Active Protection
 613           System (hdaps), which provides an accelerometer and other misc. data.
 614           ThinkPads starting with the R50, T41, and X40 are supported.  The
 615           accelerometer data is readable via sysfs.
 616
 617           This driver also provides an absolute input class device, allowing
 618           the laptop to act as a pinball machine-esque joystick.
 619
 620           If your ThinkPad is not recognized by the driver, please update to latest
 621           BIOS. This is especially the case for some R52 ThinkPads.
 622
 623           Say Y here if you have an applicable laptop and want to experience
 624           the awesome power of hdaps.
 625
 626 config SENSORS_APPLESMC
 627         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
 628         depends on INPUT && X86
 629         select NEW_LEDS
 630         select LEDS_CLASS
 631         default n
 632         help
 633           This driver provides support for the Apple System Management
 634           Controller, which provides an accelerometer (Apple Sudden Motion
 635           Sensor), light sensors, temperature sensors, keyboard backlight
 636           control and fan control.
 637
 638           Only Intel-based Apple's computers are supported (MacBook Pro,
 639           MacBook, MacMini).
 640
 641           Data from the different sensors, keyboard backlight control and fan
 642           control are accessible via sysfs.
 643
 644           This driver also provides an absolute input class device, allowing
 645           the laptop to act as a pinball machine-esque joystick.
 646
 647           Say Y here if you have an applicable laptop and want to experience
 648           the awesome power of applesmc.
 649
 650 config HWMON_DEBUG_CHIP
 651         bool "Hardware Monitoring Chip debugging messages"
 652         default n
 653         help
 654           Say Y here if you want the I2C chip drivers to produce a bunch of
 655           debug messages to the system log.  Select this if you are having
 656           a problem with I2C support and want to see more of what is going
 657           on.
 658
 659 endif # HWMON