hwmon: (pwm-fan) Remove duplicate dev_set_drvdata call

[mirror_ubuntu-bionic-kernel.git] / drivers / hwmon / Kconfig

#
# Hardware monitoring chip drivers configuration
#

menuconfig HWMON
        tristate "Hardware Monitoring support"
        depends on HAS_IOMEM
        default y
        help
          Hardware monitoring devices let you monitor the hardware health
          of a system. Most modern motherboards include such a device. It
          can include temperature sensors, voltage sensors, fan speed
          sensors and various additional features such as the ability to
          control the speed of the fans.  If you want this support you
          should say Y here and also to the specific driver(s) for your
          sensors chip(s) below.

          To find out which specific driver(s) you need, use the
          sensors-detect script from the lm_sensors package.  Read
          <file:Documentation/hwmon/userspace-tools> for details.

          This support can also be built as a module.  If so, the module
          will be called hwmon.

if HWMON

config HWMON_VID
        tristate
        default n

config HWMON_DEBUG_CHIP
        bool "Hardware Monitoring Chip debugging messages"
        default n
        help
          Say Y here if you want the I2C chip drivers to produce a bunch of
          debug messages to the system log.  Select this if you are having
          a problem with I2C support and want to see more of what is going
          on.

comment "Native drivers"

config SENSORS_AB8500
        tristate "AB8500 thermal monitoring"
        depends on AB8500_GPADC && AB8500_BM
        default n
        help
          If you say yes here you get support for the thermal sensor part
          of the AB8500 chip. The driver includes thermal management for
          AB8500 die and two GPADC channels. The GPADC channel are preferably
          used to access sensors outside the AB8500 chip.

          This driver can also be built as a module.  If so, the module
          will be called abx500-temp.

config SENSORS_ABITUGURU
        tristate "Abit uGuru (rev 1 & 2)"
        depends on X86 && DMI
        help
          If you say yes here you get support for the sensor part of the first
          and second revision of the Abit uGuru chip. The voltage and frequency
          control parts of the Abit uGuru are not supported. The Abit uGuru
          chip can be found on Abit uGuru featuring motherboards (most modern
          Abit motherboards from before end 2005). For more info and a list
          of which motherboards have which revision see
          Documentation/hwmon/abituguru

          This driver can also be built as a module.  If so, the module
          will be called abituguru.

config SENSORS_ABITUGURU3
        tristate "Abit uGuru (rev 3)"
        depends on X86 && DMI
        help
          If you say yes here you get support for the sensor part of the
          third revision of the Abit uGuru chip. Only reading the sensors
          and their settings is supported. The third revision of the Abit
          uGuru chip can be found on recent Abit motherboards (since end
          2005). For more info and a list of which motherboards have which
          revision see Documentation/hwmon/abituguru3

          This driver can also be built as a module.  If so, the module
          will be called abituguru3.

config SENSORS_AD7314
        tristate "Analog Devices AD7314 and compatibles"
        depends on SPI
        help
          If you say yes here you get support for the Analog Devices
          AD7314, ADT7301 and ADT7302 temperature sensors.

          This driver can also be built as a module. If so, the module
          will be called ad7314.

config SENSORS_AD7414
        tristate "Analog Devices AD7414"
        depends on I2C
        help
          If you say yes here you get support for the Analog Devices
          AD7414 temperature monitoring chip.

          This driver can also be built as a module. If so, the module
          will be called ad7414.

config SENSORS_AD7418
        tristate "Analog Devices AD7416, AD7417 and AD7418"
        depends on I2C
        help
          If you say yes here you get support for the Analog Devices
          AD7416, AD7417 and AD7418 temperature monitoring chips.

          This driver can also be built as a module. If so, the module
          will be called ad7418.

config SENSORS_ADM1021
        tristate "Analog Devices ADM1021 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for Analog Devices ADM1021
          and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
          Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.

          This driver can also be built as a module.  If so, the module
          will be called adm1021.

config SENSORS_ADM1025
        tristate "Analog Devices ADM1025 and compatibles"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM1025
          and Philips NE1619 sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called adm1025.

config SENSORS_ADM1026
        tristate "Analog Devices ADM1026 and compatibles"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM1026
          sensor chip.

          This driver can also be built as a module.  If so, the module
          will be called adm1026.

config SENSORS_ADM1029
        tristate "Analog Devices ADM1029"
        depends on I2C
        help
          If you say yes here you get support for Analog Devices ADM1029
          sensor chip.
          Very rare chip, please let us know you use it.

          This driver can also be built as a module.  If so, the module
          will be called adm1029.

config SENSORS_ADM1031
        tristate "Analog Devices ADM1031 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for Analog Devices ADM1031
          and ADM1030 sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called adm1031.

config SENSORS_ADM9240
        tristate "Analog Devices ADM9240 and compatibles"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM9240,
          Dallas DS1780, National Semiconductor LM81 sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called adm9240.

config SENSORS_ADT7X10
        tristate
        help
          This module contains common code shared by the ADT7310/ADT7320 and
          ADT7410/ADT7420 temperature monitoring chip drivers.

          If build as a module, the module will be called adt7x10.

config SENSORS_ADT7310
        tristate "Analog Devices ADT7310/ADT7320"
        depends on SPI_MASTER
        select SENSORS_ADT7X10
        help
          If you say yes here you get support for the Analog Devices
          ADT7310 and ADT7320 temperature monitoring chips.

          This driver can also be built as a module. If so, the module
          will be called adt7310.

config SENSORS_ADT7410
        tristate "Analog Devices ADT7410/ADT7420"
        depends on I2C
        select SENSORS_ADT7X10
        help
          If you say yes here you get support for the Analog Devices
          ADT7410 and ADT7420 temperature monitoring chips.

          This driver can also be built as a module. If so, the module
          will be called adt7410.

config SENSORS_ADT7411
        tristate "Analog Devices ADT7411"
        depends on I2C
        help
          If you say yes here you get support for the Analog Devices
          ADT7411 voltage and temperature monitoring chip.

          This driver can also be built as a module. If so, the module
          will be called adt7411.

config SENSORS_ADT7462
        tristate "Analog Devices ADT7462"
        depends on I2C
        help
          If you say yes here you get support for the Analog Devices
          ADT7462 temperature monitoring chips.

          This driver can also be built as a module. If so, the module
          will be called adt7462.

config SENSORS_ADT7470
        tristate "Analog Devices ADT7470"
        depends on I2C
        help
          If you say yes here you get support for the Analog Devices
          ADT7470 temperature monitoring chips.

          This driver can also be built as a module. If so, the module
          will be called adt7470.

config SENSORS_ADT7475
        tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for the Analog Devices
          ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
          chips.

          This driver can also be build as a module.  If so, the module
          will be called adt7475.

config SENSORS_ASC7621
        tristate "Andigilog aSC7621"
        depends on I2C
        help
          If you say yes here you get support for the aSC7621
          family of SMBus sensors chip found on most Intel X38, X48, X58,
          945, 965 and 975 desktop boards.  Currently supported chips:
          aSC7621
          aSC7621a

          This driver can also be built as a module.  If so, the module
          will be called asc7621.

config SENSORS_K8TEMP
        tristate "AMD Athlon64/FX or Opteron temperature sensor"
        depends on X86 && PCI
        help
          If you say yes here you get support for the temperature
          sensor(s) inside your CPU. Supported is whole AMD K8
          microarchitecture. Please note that you will need at least
          lm-sensors 2.10.1 for proper userspace support.

          This driver can also be built as a module.  If so, the module
          will be called k8temp.

config SENSORS_K10TEMP
        tristate "AMD Family 10h+ temperature sensor"
        depends on X86 && PCI
        help
          If you say yes here you get support for the temperature
          sensor(s) inside your CPU. Supported are later revisions of
          the AMD Family 10h and all revisions of the AMD Family 11h,
          12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri) and
          16h (Kabini/Mullins) microarchitectures.

          This driver can also be built as a module.  If so, the module
          will be called k10temp.

config SENSORS_FAM15H_POWER
        tristate "AMD Family 15h processor power"
        depends on X86 && PCI
        help
          If you say yes here you get support for processor power
          information of your AMD family 15h CPU.

          This driver can also be built as a module.  If so, the module
          will be called fam15h_power.

config SENSORS_APPLESMC
        tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
        depends on INPUT && X86
        select NEW_LEDS
        select LEDS_CLASS
        select INPUT_POLLDEV
        default n
        help
          This driver provides support for the Apple System Management
          Controller, which provides an accelerometer (Apple Sudden Motion
          Sensor), light sensors, temperature sensors, keyboard backlight
          control and fan control.

          Only Intel-based Apple's computers are supported (MacBook Pro,
          MacBook, MacMini).

          Data from the different sensors, keyboard backlight control and fan
          control are accessible via sysfs.

          This driver also provides an absolute input class device, allowing
          the laptop to act as a pinball machine-esque joystick.

          Say Y here if you have an applicable laptop and want to experience
          the awesome power of applesmc.

config SENSORS_ASB100
        tristate "Asus ASB100 Bach"
        depends on X86 && I2C
        select HWMON_VID
        help
          If you say yes here you get support for the ASB100 Bach sensor
          chip found on some Asus mainboards.

          This driver can also be built as a module.  If so, the module
          will be called asb100.

config SENSORS_ATXP1
        tristate "Attansic ATXP1 VID controller"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for the Attansic ATXP1 VID
          controller.

          If your board have such a chip, you are able to control your CPU
          core and other voltages.

          This driver can also be built as a module.  If so, the module
          will be called atxp1.

config SENSORS_DS620
        tristate "Dallas Semiconductor DS620"
        depends on I2C
        help
          If you say yes here you get support for Dallas Semiconductor
          DS620 sensor chip.

          This driver can also be built as a module.  If so, the module
          will be called ds620.

config SENSORS_DS1621
        tristate "Dallas Semiconductor DS1621 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for Dallas Semiconductor/Maxim
          Integrated DS1621 sensor chips and compatible models including:

          - Dallas Semiconductor DS1625
          - Maxim Integrated DS1631
          - Maxim Integrated DS1721
          - Maxim Integrated DS1731

          This driver can also be built as a module.  If so, the module
          will be called ds1621.

config SENSORS_DA9052_ADC
        tristate "Dialog DA9052/DA9053 ADC"
        depends on PMIC_DA9052
        help
          Say y here to support the ADC found on Dialog Semiconductor
          DA9052-BC and DA9053-AA/Bx PMICs.

          This driver can also be built as module. If so, the module
          will be called da9052-hwmon.

config SENSORS_DA9055
        tristate "Dialog Semiconductor DA9055 ADC"
        depends on MFD_DA9055
        help
          If you say yes here you get support for ADC on the Dialog
          Semiconductor DA9055 PMIC.

          This driver can also be built as a module.  If so, the module
          will be called da9055-hwmon.

config SENSORS_I5K_AMB
        tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
        depends on PCI
        help
          If you say yes here you get support for FB-DIMM AMB temperature
          monitoring chips on systems with the Intel 5000 series chipset.

          This driver can also be built as a module. If so, the module
          will be called i5k_amb.

config SENSORS_F71805F
        tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
        depends on !PPC
        help
          If you say yes here you get support for hardware monitoring
          features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
          Super-I/O chips.

          This driver can also be built as a module.  If so, the module
          will be called f71805f.

config SENSORS_F71882FG
        tristate "Fintek F71882FG and compatibles"
        depends on !PPC
        help
          If you say yes here you get support for hardware monitoring
          features of many Fintek Super-I/O (LPC) chips. The currently
          supported chips are:
            F71808E/A
            F71858FG
            F71862FG
            F71863FG
            F71869F/E/A
            F71882FG
            F71883FG
            F71889FG/ED/A
            F8000
            F81801U
            F81865F

          This driver can also be built as a module.  If so, the module
          will be called f71882fg.

config SENSORS_F75375S
        tristate "Fintek F75375S/SP, F75373 and F75387"
        depends on I2C
        help
          If you say yes here you get support for hardware monitoring
          features of the Fintek F75375S/SP, F75373 and F75387

          This driver can also be built as a module.  If so, the module
          will be called f75375s.

config SENSORS_MC13783_ADC
        tristate "Freescale MC13783/MC13892 ADC"
        depends on MFD_MC13XXX
        help
          Support for the A/D converter on MC13783 and MC13892 PMIC.

config SENSORS_FSCHMD
        tristate "Fujitsu Siemens Computers sensor chips"
        depends on X86 && I2C
        help
          If you say yes here you get support for the following Fujitsu
          Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
          Heimdall, Heracles, Hades and Syleus including support for the
          integrated watchdog.

          This is a merged driver for FSC sensor chips replacing the fscpos,
          fscscy and fscher drivers and adding support for several other FSC
          sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called fschmd.

config SENSORS_GL518SM
        tristate "Genesys Logic GL518SM"
        depends on I2C
        help
          If you say yes here you get support for Genesys Logic GL518SM
          sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called gl518sm.

config SENSORS_GL520SM
        tristate "Genesys Logic GL520SM"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for Genesys Logic GL520SM
          sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called gl520sm.

config SENSORS_G760A
        tristate "GMT G760A"
        depends on I2C
        help
          If you say yes here you get support for Global Mixed-mode
          Technology Inc G760A fan speed PWM controller chips.

          This driver can also be built as a module.  If so, the module
          will be called g760a.

config SENSORS_G762
        tristate "GMT G762 and G763"
        depends on I2C
        help
          If you say yes here you get support for Global Mixed-mode
          Technology Inc G762 and G763 fan speed PWM controller chips.

          This driver can also be built as a module.  If so, the module
          will be called g762.

config SENSORS_GPIO_FAN
        tristate "GPIO fan"
        depends on GPIOLIB
        help
          If you say yes here you get support for fans connected to GPIO lines.

          This driver can also be built as a module.  If so, the module
          will be called gpio-fan.

config SENSORS_HIH6130
        tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
        depends on I2C
        help
          If you say yes here you get support for Honeywell Humidicon
          HIH-6130 and HIH-6131 Humidicon humidity sensors.

          This driver can also be built as a module.  If so, the module
          will be called hih6130.

config SENSORS_IBMAEM
        tristate "IBM Active Energy Manager temperature/power sensors and control"
        select IPMI_SI
        depends on IPMI_HANDLER
        help
          If you say yes here you get support for the temperature and
          power sensors and capping hardware in various IBM System X
          servers that support Active Energy Manager.  This includes
          the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
          and certain HC10/HS2x/LS2x/QS2x blades.

          This driver can also be built as a module.  If so, the module
          will be called ibmaem.

config SENSORS_IBMPEX
        tristate "IBM PowerExecutive temperature/power sensors"
        select IPMI_SI
        depends on IPMI_HANDLER
        help
          If you say yes here you get support for the temperature and
          power sensors in various IBM System X servers that support
          PowerExecutive.  So far this includes the x3350, x3550, x3650,
          x3655, and x3755; the x3800, x3850, and x3950 models that have
          PCI Express; and some of the HS2x, LS2x, and QS2x blades.

          This driver can also be built as a module.  If so, the module
          will be called ibmpex.

config SENSORS_IBMPOWERNV
        tristate "IBM POWERNV platform sensors"
        depends on PPC_POWERNV
        default y
        help
          If you say yes here you get support for the temperature/fan/power
          sensors on your PowerNV platform.

          This driver can also be built as a module. If so, the module
          will be called ibmpowernv.

config SENSORS_IIO_HWMON
        tristate "Hwmon driver that uses channels specified via iio maps"
        depends on IIO
        help
          This is a platform driver that in combination with a suitable
          map allows IIO devices to provide basic hwmon functionality
          for those channels specified in the map.  This map can be provided
          either via platform data or the device tree bindings.

config SENSORS_CORETEMP
        tristate "Intel Core/Core2/Atom temperature sensor"
        depends on X86
        help
          If you say yes here you get support for the temperature
          sensor inside your CPU. Most of the family 6 CPUs
          are supported. Check Documentation/hwmon/coretemp for details.

config SENSORS_IT87
        tristate "ITE IT87xx and compatibles"
        depends on !PPC
        select HWMON_VID
        help
          If you say yes here you get support for ITE IT8705F, IT8712F,
          IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
          IT8771E, IT8772E, IT8782F, IT8783E/F and IT8603E sensor chips,
          and the SiS950 clone.

          This driver can also be built as a module.  If so, the module
          will be called it87.

config SENSORS_JZ4740
        tristate "Ingenic JZ4740 SoC ADC driver"
        depends on MACH_JZ4740 && MFD_JZ4740_ADC
        help
          If you say yes here you get support for reading adc values from the ADCIN
          pin on Ingenic JZ4740 SoC based boards.

          This driver can also be build as a module. If so, the module will be
          called jz4740-hwmon.

config SENSORS_JC42
        tristate "JEDEC JC42.4 compliant memory module temperature sensors"
        depends on I2C
        help
          If you say yes here, you get support for JEDEC JC42.4 compliant
          temperature sensors, which are used on many DDR3 memory modules for
          mobile devices and servers.  Support will include, but not be limited
          to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
          MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
          STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.

          This driver can also be built as a module.  If so, the module
          will be called jc42.

config SENSORS_POWR1220
        tristate "Lattice POWR1220 Power Monitoring"
        depends on I2C
        default n
        help
          If you say yes here you get access to the hardware monitoring
          functions of the Lattice POWR1220 isp Power Supply Monitoring,
          Sequencing and Margining Controller.

          This driver can also be built as a module.  If so, the module
          will be called powr1220.

config SENSORS_LINEAGE
        tristate "Lineage Compact Power Line Power Entry Module"
        depends on I2C
        help
          If you say yes here you get support for the Lineage Compact Power Line
          series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
          CP2000DC, CP2725, and others.

          This driver can also be built as a module.  If so, the module
          will be called lineage-pem.

config SENSORS_LTC2945
        tristate "Linear Technology LTC2945"
        depends on I2C
        select REGMAP_I2C
        default n
        help
          If you say yes here you get support for Linear Technology LTC2945
          I2C System Monitor.

          This driver can also be built as a module. If so, the module will
          be called ltc2945.

config SENSORS_LTC4151
        tristate "Linear Technology LTC4151"
        depends on I2C
        default n
        help
          If you say yes here you get support for Linear Technology LTC4151
          High Voltage I2C Current and Voltage Monitor interface.

          This driver can also be built as a module. If so, the module will
          be called ltc4151.

config SENSORS_LTC4215
        tristate "Linear Technology LTC4215"
        depends on I2C
        default n
        help
          If you say yes here you get support for Linear Technology LTC4215
          Hot Swap Controller I2C interface.

          This driver can also be built as a module. If so, the module will
          be called ltc4215.

config SENSORS_LTC4222
        tristate "Linear Technology LTC4222"
        depends on I2C
        select REGMAP_I2C
        default n
        help
          If you say yes here you get support for Linear Technology LTC4222
          Dual Hot Swap Controller I2C interface.

          This driver can also be built as a module. If so, the module will
          be called ltc4222.

config SENSORS_LTC4245
        tristate "Linear Technology LTC4245"
        depends on I2C
        default n
        help
          If you say yes here you get support for Linear Technology LTC4245
          Multiple Supply Hot Swap Controller I2C interface.

          This driver can also be built as a module. If so, the module will
          be called ltc4245.

config SENSORS_LTC4260
        tristate "Linear Technology LTC4260"
        depends on I2C
        select REGMAP_I2C
        default n
        help
          If you say yes here you get support for Linear Technology LTC4260
          Positive Voltage Hot Swap Controller I2C interface.

          This driver can also be built as a module. If so, the module will
          be called ltc4260.

config SENSORS_LTC4261
        tristate "Linear Technology LTC4261"
        depends on I2C
        default n
        help
          If you say yes here you get support for Linear Technology LTC4261
          Negative Voltage Hot Swap Controller I2C interface.

          This driver can also be built as a module. If so, the module will
          be called ltc4261.

config SENSORS_MAX1111
        tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
        depends on SPI_MASTER
        help
          Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
          ADC chips.

          This driver can also be built as a module.  If so, the module
          will be called max1111.

config SENSORS_MAX16065
        tristate "Maxim MAX16065 System Manager and compatibles"
        depends on I2C
        help
          If you say yes here you get support for hardware monitoring
          capabilities of the following Maxim System Manager chips.
            MAX16065
            MAX16066
            MAX16067
            MAX16068
            MAX16070
            MAX16071

          This driver can also be built as a module.  If so, the module
          will be called max16065.

config SENSORS_MAX1619
        tristate "Maxim MAX1619 sensor chip"
        depends on I2C
        help
          If you say yes here you get support for MAX1619 sensor chip.

          This driver can also be built as a module.  If so, the module
          will be called max1619.

config SENSORS_MAX1668
        tristate "Maxim MAX1668 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for MAX1668, MAX1989 and
          MAX1805 chips.

          This driver can also be built as a module.  If so, the module
          will be called max1668.

config SENSORS_MAX197
        tristate "Maxim MAX197 and compatibles"
        help
          Support for the Maxim MAX197 A/D converter.
          Support will include, but not be limited to, MAX197, and MAX199.

          This driver can also be built as a module. If so, the module
          will be called max197.

config SENSORS_MAX6639
        tristate "Maxim MAX6639 sensor chip"
        depends on I2C
        help
          If you say yes here you get support for the MAX6639
          sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called max6639.

config SENSORS_MAX6642
        tristate "Maxim MAX6642 sensor chip"
        depends on I2C
        help
          If you say yes here you get support for MAX6642 sensor chip.
          MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
          with Overtemperature Alarm from Maxim.

          This driver can also be built as a module.  If so, the module
          will be called max6642.

config SENSORS_MAX6650
        tristate "Maxim MAX6650 sensor chip"
        depends on I2C
        help
          If you say yes here you get support for the MAX6650 / MAX6651
          sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called max6650.

config SENSORS_MAX6697
        tristate "Maxim MAX6697 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for MAX6581, MAX6602, MAX6622,
          MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
          temperature sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called max6697.

config SENSORS_HTU21
        tristate "Measurement Specialties HTU21D humidity/temperature sensors"
        depends on I2C
        help
          If you say yes here you get support for the Measurement Specialties
          HTU21D humidity and temperature sensors.

          This driver can also be built as a module.  If so, the module
          will be called htu21.

config SENSORS_MCP3021
        tristate "Microchip MCP3021 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for MCP3021 and MCP3221.
          The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
          with 12-bit resolution.

          This driver can also be built as a module.  If so, the module
          will be called mcp3021.

config SENSORS_ADCXX
        tristate "National Semiconductor ADCxxxSxxx"
        depends on SPI_MASTER
        help
          If you say yes here you get support for the National Semiconductor
          ADC<bb><c>S<sss> chip family, where
          * bb  is the resolution in number of bits (8, 10, 12)
          * c   is the number of channels (1, 2, 4, 8)
          * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
            kSPS and 101 for 1 MSPS)

          Examples : ADC081S101, ADC124S501, ...

          This driver can also be built as a module.  If so, the module
          will be called adcxx.

config SENSORS_LM63
        tristate "National Semiconductor LM63 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for the National
          Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
          sensors with integrated fan control.  Such chips are found
          on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
          others.

          This driver can also be built as a module.  If so, the module
          will be called lm63.

config SENSORS_LM70
        tristate "National Semiconductor LM70 and compatibles"
        depends on SPI_MASTER
        help
          If you say yes here you get support for the National Semiconductor
          LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
          ture sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called lm70.

config SENSORS_LM73
        tristate "National Semiconductor LM73"
        depends on I2C
        help
          If you say yes here you get support for National Semiconductor LM73
          sensor chips.
          This driver can also be built as a module.  If so, the module
          will be called lm73.

config SENSORS_LM75
        tristate "National Semiconductor LM75 and compatibles"
        depends on I2C
        depends on THERMAL || !THERMAL_OF
        help
          If you say yes here you get support for one common type of
          temperature sensor chip, with models including:

                - Analog Devices ADT75
                - Dallas Semiconductor DS75, DS1775 and DS7505
                - Global Mixed-mode Technology (GMT) G751
                - Maxim MAX6625 and MAX6626
                - Microchip MCP980x
                - National Semiconductor LM75, LM75A
                - NXP's LM75A
                - ST Microelectronics STDS75
                - TelCom (now Microchip) TCN75
                - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75,
                  TMP175, TMP275

          This driver supports driver model based binding through board
          specific I2C device tables.

          It also supports the "legacy" style of driver binding.  To use
          that with some chips which don't replicate LM75 quirks exactly,
          you may need the "force" module parameter.

          This driver can also be built as a module.  If so, the module
          will be called lm75.

config SENSORS_LM77
        tristate "National Semiconductor LM77"
        depends on I2C
        help
          If you say yes here you get support for National Semiconductor LM77
          sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called lm77.

config SENSORS_LM78
        tristate "National Semiconductor LM78 and compatibles"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for National Semiconductor LM78,
          LM78-J and LM79.

          This driver can also be built as a module.  If so, the module
          will be called lm78.

config SENSORS_LM80
        tristate "National Semiconductor LM80 and LM96080"
        depends on I2C
        help
          If you say yes here you get support for National Semiconductor
          LM80 and LM96080 sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called lm80.

config SENSORS_LM83
        tristate "National Semiconductor LM83 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for National Semiconductor
          LM82 and LM83 sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called lm83.

config SENSORS_LM85
        tristate "National Semiconductor LM85 and compatibles"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for National Semiconductor LM85
          sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
          EMC6D101, EMC6D102, and EMC6D103.

          This driver can also be built as a module.  If so, the module
          will be called lm85.

config SENSORS_LM87
        tristate "National Semiconductor LM87 and compatibles"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for National Semiconductor LM87
          and Analog Devices ADM1024 sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called lm87.

config SENSORS_LM90
        tristate "National Semiconductor LM90 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for National Semiconductor LM90,
          LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
          Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
          MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
          Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
          sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called lm90.

config SENSORS_LM92
        tristate "National Semiconductor LM92 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for National Semiconductor LM92
          and Maxim MAX6635 sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called lm92.

config SENSORS_LM93
        tristate "National Semiconductor LM93 and compatibles"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for National Semiconductor LM93,
          LM94, and compatible sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called lm93.

config SENSORS_LM95234
        tristate "National Semiconductor LM95234"
        depends on I2C
        help
          If you say yes here you get support for the LM95234 temperature
          sensor.

          This driver can also be built as a module.  If so, the module
          will be called lm95234.

config SENSORS_LM95241
        tristate "National Semiconductor LM95241 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for LM95231 and LM95241 sensor
          chips.

          This driver can also be built as a module.  If so, the module
          will be called lm95241.

config SENSORS_LM95245
        tristate "National Semiconductor LM95245 sensor chip"
        depends on I2C
        help
          If you say yes here you get support for LM95245 sensor chip.

          This driver can also be built as a module.  If so, the module
          will be called lm95245.

config SENSORS_PC87360
        tristate "National Semiconductor PC87360 family"
        depends on !PPC
        select HWMON_VID
        help
          If you say yes here you get access to the hardware monitoring
          functions of the National Semiconductor PC8736x Super-I/O chips.
          The PC87360, PC87363 and PC87364 only have fan monitoring and
          control.  The PC87365 and PC87366 additionally have voltage and
          temperature monitoring.

          This driver can also be built as a module.  If so, the module
          will be called pc87360.

config SENSORS_PC87427
        tristate "National Semiconductor PC87427"
        depends on !PPC
        help
          If you say yes here you get access to the hardware monitoring
          functions of the National Semiconductor PC87427 Super-I/O chip.
          The chip has two distinct logical devices, one for fan speed
          monitoring and control, and one for voltage and temperature
          monitoring. Fan speed monitoring and control are supported, as
          well as temperature monitoring. Voltages aren't supported yet.

          This driver can also be built as a module.  If so, the module
          will be called pc87427.

config SENSORS_NTC_THERMISTOR
        tristate "NTC thermistor support from Murata"
        depends on !OF || IIO=n || IIO
        help
          This driver supports NTC thermistors sensor reading and its
          interpretation. The driver can also monitor the temperature and
          send notifications about the temperature.

          Currently, this driver supports
          NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333
          from Murata and B57330V2103 from EPCOS.

          This driver can also be built as a module.  If so, the module
          will be called ntc-thermistor.

config SENSORS_NCT6683
        tristate "Nuvoton NCT6683D"
        depends on !PPC
        help
          If you say yes here you get support for the hardware monitoring
          functionality of the Nuvoton NCT6683D eSIO chip.

          This driver can also be built as a module.  If so, the module
          will be called nct6683.

config SENSORS_NCT6775
        tristate "Nuvoton NCT6775F and compatibles"
        depends on !PPC
        select HWMON_VID
        help
          If you say yes here you get support for the hardware monitoring
          functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
          NCT6791D and compatible Super-I/O chips. This driver replaces the
          w83627ehf driver for NCT6775F and NCT6776F.

          This driver can also be built as a module.  If so, the module
          will be called nct6775.

config SENSORS_PCF8591
        tristate "Philips PCF8591 ADC/DAC"
        depends on I2C
        default n
        help
          If you say yes here you get support for Philips PCF8591 4-channel
          ADC, 1-channel DAC chips.

          This driver can also be built as a module.  If so, the module
          will be called pcf8591.

          These devices are hard to detect and rarely found on mainstream
          hardware.  If unsure, say N.

source drivers/hwmon/pmbus/Kconfig

config SENSORS_PWM_FAN
        tristate "PWM fan"
        depends on PWM
        help
          If you say yes here you get support for fans connected to PWM lines.
          The driver uses the generic PWM interface, thus it will work on a
          variety of SoCs.

          This driver can also be built as a module.  If so, the module
          will be called pwm-fan.

config SENSORS_SHT15
        tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
        depends on GPIOLIB
        help
          If you say yes here you get support for the Sensiron SHT10, SHT11,
          SHT15, SHT71, SHT75 humidity and temperature sensors.

          This driver can also be built as a module.  If so, the module
          will be called sht15.

config SENSORS_SHT21
        tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
        depends on I2C
        help
          If you say yes here you get support for the Sensiron SHT21, SHT25
          humidity and temperature sensors.

          This driver can also be built as a module.  If so, the module
          will be called sht21.

config SENSORS_SHTC1
        tristate "Sensiron humidity and temperature sensors. SHTC1 and compat."
        depends on I2C
        help
          If you say yes here you get support for the Sensiron SHTC1 and SHTW1
          humidity and temperature sensors.

          This driver can also be built as a module.  If so, the module
          will be called shtc1.

config SENSORS_S3C
        tristate "Samsung built-in ADC"
        depends on S3C_ADC
        help
          If you say yes here you get support for the on-board ADCs of
          the Samsung S3C24XX, S3C64XX and other series of SoC

          This driver can also be built as a module. If so, the module
          will be called s3c-hwmon.

config SENSORS_S3C_RAW
        bool "Include raw channel attributes in sysfs"
        depends on SENSORS_S3C
        help
          Say Y here if you want to include raw copies of all the ADC
          channels in sysfs.

config SENSORS_SIS5595
        tristate "Silicon Integrated Systems Corp. SiS5595"
        depends on PCI
        help
          If you say yes here you get support for the integrated sensors in
          SiS5595 South Bridges.

          This driver can also be built as a module.  If so, the module
          will be called sis5595.

config SENSORS_DME1737
        tristate "SMSC DME1737, SCH311x and compatibles"
        depends on I2C && !PPC
        select HWMON_VID
        help
          If you say yes here you get support for the hardware monitoring
          and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
          Asus A8000 Super-I/O chips.

          This driver can also be built as a module.  If so, the module
          will be called dme1737.

config SENSORS_EMC1403
        tristate "SMSC EMC1403/23 thermal sensor"
        depends on I2C
        select REGMAP_I2C
        help
          If you say yes here you get support for the SMSC EMC1403/23
          temperature monitoring chip.

          Threshold values can be configured using sysfs.
          Data from the different diodes are accessible via sysfs.

config SENSORS_EMC2103
        tristate "SMSC EMC2103"
        depends on I2C
        help
          If you say yes here you get support for the temperature
          and fan sensors of the SMSC EMC2103 chips.

          This driver can also be built as a module.  If so, the module
          will be called emc2103.

config SENSORS_EMC6W201
        tristate "SMSC EMC6W201"
        depends on I2C
        help
          If you say yes here you get support for the SMSC EMC6W201
          hardware monitoring chip.

          This driver can also be built as a module.  If so, the module
          will be called emc6w201.

config SENSORS_SMSC47M1
        tristate "SMSC LPC47M10x and compatibles"
        depends on !PPC
        help
          If you say yes here you get support for the integrated fan
          monitoring and control capabilities of the SMSC LPC47B27x,
          LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
          LPC47M192, LPC47M292 and LPC47M997 chips.

          The temperature and voltage sensor features of the LPC47M15x,
          LPC47M192, LPC47M292 and LPC47M997 are supported by another
          driver, select also "SMSC LPC47M192 and compatibles" below for
          those.

          This driver can also be built as a module.  If so, the module
          will be called smsc47m1.

config SENSORS_SMSC47M192
        tristate "SMSC LPC47M192 and compatibles"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for the temperature and
          voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
          and LPC47M997 chips.

          The fan monitoring and control capabilities of these chips
          are supported by another driver, select
          "SMSC LPC47M10x and compatibles" above. You need both drivers
          if you want fan control and voltage/temperature sensor support.

          This driver can also be built as a module.  If so, the module
          will be called smsc47m192.

config SENSORS_SMSC47B397
        tristate "SMSC LPC47B397-NC"
        depends on !PPC
        help
          If you say yes here you get support for the SMSC LPC47B397-NC
          sensor chip.

          This driver can also be built as a module.  If so, the module
          will be called smsc47b397.

config SENSORS_SCH56XX_COMMON
        tristate
        default n

config SENSORS_SCH5627
        tristate "SMSC SCH5627"
        depends on !PPC && WATCHDOG
        select SENSORS_SCH56XX_COMMON
        select WATCHDOG_CORE
        help
          If you say yes here you get support for the hardware monitoring
          features of the SMSC SCH5627 Super-I/O chip including support for
          the integrated watchdog.

          This driver can also be built as a module.  If so, the module
          will be called sch5627.

config SENSORS_SCH5636
        tristate "SMSC SCH5636"
        depends on !PPC && WATCHDOG
        select SENSORS_SCH56XX_COMMON
        select WATCHDOG_CORE
        help
          SMSC SCH5636 Super I/O chips include an embedded microcontroller for
          hardware monitoring solutions, allowing motherboard manufacturers to
          create their own custom hwmon solution based upon the SCH5636.

          Currently this driver only supports the Fujitsu Theseus SCH5636 based
          hwmon solution. Say yes here if you want support for the Fujitsu
          Theseus' hardware monitoring features including support for the
          integrated watchdog.

          This driver can also be built as a module.  If so, the module
          will be called sch5636.

config SENSORS_SMM665
        tristate "Summit Microelectronics SMM665"
        depends on I2C
        default n
        help
          If you say yes here you get support for the hardware monitoring
          features of the Summit Microelectronics SMM665/SMM665B Six-Channel
          Active DC Output Controller / Monitor.

          Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
          Support for those chips is untested.

          This driver can also be built as a module. If so, the module will
          be called smm665.

config SENSORS_ADC128D818
        tristate "Texas Instruments ADC128D818"
        depends on I2C
        help
          If you say yes here you get support for the Texas Instruments
          ADC128D818 System Monitor with Temperature Sensor chip.

          This driver can also be built as a module. If so, the module
          will be called adc128d818.

config SENSORS_ADS1015
        tristate "Texas Instruments ADS1015"
        depends on I2C
        help
          If you say yes here you get support for Texas Instruments
          ADS1015/ADS1115 12/16-bit 4-input ADC device.

          This driver can also be built as a module.  If so, the module
          will be called ads1015.

config SENSORS_ADS7828
        tristate "Texas Instruments ADS7828 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for Texas Instruments ADS7828 and
          ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
          it is 8-bit on ADS7830.

          This driver can also be built as a module.  If so, the module
          will be called ads7828.

config SENSORS_ADS7871
        tristate "Texas Instruments ADS7871 A/D converter"
        depends on SPI
        help
          If you say yes here you get support for TI ADS7871 & ADS7870

          This driver can also be built as a module.  If so, the module
          will be called ads7871.

config SENSORS_AMC6821
        tristate "Texas Instruments AMC6821"
        depends on I2C 
        help
          If you say yes here you get support for the Texas Instruments
          AMC6821 hardware monitoring chips.

          This driver can also be build as a module.  If so, the module
          will be called amc6821.

config SENSORS_INA209
        tristate "TI / Burr Brown INA209"
        depends on I2C
        help
          If you say yes here you get support for the TI / Burr Brown INA209
          voltage / current / power monitor I2C interface.

          This driver can also be built as a module. If so, the module will
          be called ina209.

config SENSORS_INA2XX
        tristate "Texas Instruments INA219 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for INA219, INA220, INA226, and
          INA230 power monitor chips.

          The INA2xx driver is configured for the default configuration of
          the part as described in the datasheet.
          Default value for Rshunt is 10 mOhms.
          This driver can also be built as a module.  If so, the module
          will be called ina2xx.

config SENSORS_THMC50
        tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
        depends on I2C
        help
          If you say yes here you get support for Texas Instruments THMC50
          sensor chips and clones: the Analog Devices ADM1022.

          This driver can also be built as a module.  If so, the module
          will be called thmc50.

config SENSORS_TMP102
        tristate "Texas Instruments TMP102"
        depends on I2C
        depends on THERMAL || !THERMAL_OF
        help
          If you say yes here you get support for Texas Instruments TMP102
          sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called tmp102.

config SENSORS_TMP103
        tristate "Texas Instruments TMP103"
        depends on I2C
        select REGMAP_I2C
        help
          If you say yes here you get support for Texas Instruments TMP103
          sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called tmp103.

config SENSORS_TMP401
        tristate "Texas Instruments TMP401 and compatibles"
        depends on I2C
        help
          If you say yes here you get support for Texas Instruments TMP401,
          TMP411, TMP431, and TMP432 temperature sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called tmp401.

config SENSORS_TMP421
        tristate "Texas Instruments TMP421 and compatible"
        depends on I2C
        help
          If you say yes here you get support for Texas Instruments TMP421,
          TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called tmp421.

config SENSORS_TWL4030_MADC
        tristate "Texas Instruments TWL4030 MADC Hwmon"
        depends on TWL4030_MADC
        help
        If you say yes here you get hwmon support for triton
        TWL4030-MADC.

        This driver can also be built as a module. If so it will be called
        twl4030-madc-hwmon.

config SENSORS_VEXPRESS
        tristate "Versatile Express"
        depends on VEXPRESS_CONFIG
        help
          This driver provides support for hardware sensors available on
          the ARM Ltd's Versatile Express platform. It can provide wide
          range of information like temperature, power, energy.

config SENSORS_VIA_CPUTEMP
        tristate "VIA CPU temperature sensor"
        depends on X86
        select HWMON_VID
        help
          If you say yes here you get support for the temperature
          sensor inside your CPU. Supported are all known variants of
          the VIA C7 and Nano.

config SENSORS_VIA686A
        tristate "VIA686A"
        depends on PCI
        help
          If you say yes here you get support for the integrated sensors in
          Via 686A/B South Bridges.

          This driver can also be built as a module.  If so, the module
          will be called via686a.

config SENSORS_VT1211
        tristate "VIA VT1211"
        depends on !PPC
        select HWMON_VID
        help
          If you say yes here then you get support for hardware monitoring
          features of the VIA VT1211 Super-I/O chip.

          This driver can also be built as a module.  If so, the module
          will be called vt1211.

config SENSORS_VT8231
        tristate "VIA VT8231"
        depends on PCI
        select HWMON_VID
        help
          If you say yes here then you get support for the integrated sensors
          in the VIA VT8231 device.

          This driver can also be built as a module.  If so, the module
          will be called vt8231.

config SENSORS_W83781D
        tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W8378x series
          of sensor chips: the W83781D, W83782D and W83783S, and the similar
          Asus AS99127F.

          This driver can also be built as a module.  If so, the module
          will be called w83781d.

config SENSORS_W83791D
        tristate "Winbond W83791D"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W83791D chip.

          This driver can also be built as a module.  If so, the module
          will be called w83791d.

config SENSORS_W83792D
        tristate "Winbond W83792D"
        depends on I2C
        help
          If you say yes here you get support for the Winbond W83792D chip.

          This driver can also be built as a module.  If so, the module
          will be called w83792d.

config SENSORS_W83793
        tristate "Winbond W83793"
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W83793
          hardware monitoring chip, including support for the integrated
          watchdog.

          This driver can also be built as a module.  If so, the module
          will be called w83793.

config SENSORS_W83795
        tristate "Winbond/Nuvoton W83795G/ADG"
        depends on I2C
        help
          If you say yes here you get support for the Winbond W83795G and
          W83795ADG hardware monitoring chip, including manual fan speed
          control.

          This driver can also be built as a module.  If so, the module
          will be called w83795.

config SENSORS_W83795_FANCTRL
        boolean "Include automatic fan control support (DANGEROUS)"
        depends on SENSORS_W83795
        default n
        help
          If you say yes here, support for automatic fan speed control
          will be included in the driver.

          This part of the code wasn't carefully reviewed and tested yet,
          so enabling this option is strongly discouraged on production
          servers. Only developers and testers should enable it for the
          time being.

          Please also note that this option will create sysfs attribute
          files which may change in the future, so you shouldn't rely
          on them being stable.

config SENSORS_W83L785TS
        tristate "Winbond W83L785TS-S"
        depends on I2C
        help
          If you say yes here you get support for the Winbond W83L785TS-S
          sensor chip, which is used on the Asus A7N8X, among other
          motherboards.

          This driver can also be built as a module.  If so, the module
          will be called w83l785ts.

config SENSORS_W83L786NG
        tristate "Winbond W83L786NG, W83L786NR"
        depends on I2C
        help
          If you say yes here you get support for the Winbond W83L786NG
          and W83L786NR sensor chips.

          This driver can also be built as a module.  If so, the module
          will be called w83l786ng.

config SENSORS_W83627HF
        tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
        depends on !PPC
        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W836X7 series
          of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
          W83697HF.

          This driver can also be built as a module.  If so, the module
          will be called w83627hf.

config SENSORS_W83627EHF
        tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
        depends on !PPC
        select HWMON_VID
        help
          If you say yes here you get support for the hardware
          monitoring functionality of the Winbond W83627EHF Super-I/O chip.

          This driver also supports the W83627EHG, which is the lead-free
          version of the W83627EHF, and the W83627DHG, which is a similar
          chip suited for specific Intel processors that use PECI such as
          the Core 2 Duo. And also the W83627UHG, which is a stripped down
          version of the W83627DHG (as far as hardware monitoring goes.)

          This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
          (also known as W83667HG-I), and NCT6776F.

          This driver can also be built as a module.  If so, the module
          will be called w83627ehf.

config SENSORS_WM831X
        tristate "WM831x PMICs"
        depends on MFD_WM831X
        help
          If you say yes here you get support for the hardware
          monitoring functionality of the Wolfson Microelectronics
          WM831x series of PMICs.

          This driver can also be built as a module.  If so, the module
          will be called wm831x-hwmon.

config SENSORS_WM8350
        tristate "Wolfson Microelectronics WM835x"
        depends on MFD_WM8350
        help
          If you say yes here you get support for the hardware
          monitoring features of the WM835x series of PMICs.

          This driver can also be built as a module.  If so, the module
          will be called wm8350-hwmon.

config SENSORS_ULTRA45
        tristate "Sun Ultra45 PIC16F747"
        depends on SPARC64
        help
          This driver provides support for the Ultra45 workstation environmental
          sensors.

if ACPI

comment "ACPI drivers"

config SENSORS_ACPI_POWER
        tristate "ACPI 4.0 power meter"
        help
          This driver exposes ACPI 4.0 power meters as hardware monitoring
          devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
          and a power meter.

          To compile this driver as a module, choose M here:
          the module will be called acpi_power_meter.

config SENSORS_ATK0110
        tristate "ASUS ATK0110"
        depends on X86
        help
          If you say yes here you get support for the ACPI hardware
          monitoring interface found in many ASUS motherboards. This
          driver will provide readings of fans, voltages and temperatures
          through the system firmware.

          This driver can also be built as a module. If so, the module
          will be called asus_atk0110.

endif # ACPI

endif # HWMON