drivers/i2c/busses/Kconfig

   1 #
   2 # Sensor device configuration
   3 #
   4
   5 menu "I2C Hardware Bus support"
   6         depends on HAS_IOMEM
   7
   8 comment "PC SMBus host controller drivers"
   9         depends on PCI
  10
  11 config I2C_ALI1535
  12         tristate "ALI 1535"
  13         depends on PCI
  14         help
  15           If you say yes to this option, support will be included for the SMB
  16           Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
  17           controller is part of the 7101 device, which is an ACPI-compliant
  18           Power Management Unit (PMU).
  19
  20           This driver can also be built as a module.  If so, the module
  21           will be called i2c-ali1535.
  22
  23 config I2C_ALI1563
  24         tristate "ALI 1563"
  25         depends on PCI
  26         help
  27           If you say yes to this option, support will be included for the SMB
  28           Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
  29           controller is part of the 7101 device, which is an ACPI-compliant
  30           Power Management Unit (PMU).
  31
  32           This driver can also be built as a module.  If so, the module
  33           will be called i2c-ali1563.
  34
  35 config I2C_ALI15X3
  36         tristate "ALI 15x3"
  37         depends on PCI
  38         help
  39           If you say yes to this option, support will be included for the
  40           Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
  41
  42           This driver can also be built as a module.  If so, the module
  43           will be called i2c-ali15x3.
  44
  45 config I2C_AMD756
  46         tristate "AMD 756/766/768/8111 and nVidia nForce"
  47         depends on PCI
  48         help
  49           If you say yes to this option, support will be included for the AMD
  50           756/766/768 mainboard I2C interfaces.  The driver also includes
  51           support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
  52           the nVidia nForce I2C interface.
  53
  54           This driver can also be built as a module.  If so, the module
  55           will be called i2c-amd756.
  56
  57 config I2C_AMD756_S4882
  58         tristate "SMBus multiplexing on the Tyan S4882"
  59         depends on I2C_AMD756 && X86
  60         help
  61           Enabling this option will add specific SMBus support for the Tyan
  62           S4882 motherboard.  On this 4-CPU board, the SMBus is multiplexed
  63           over 8 different channels, where the various memory module EEPROMs
  64           and temperature sensors live.  Saying yes here will give you access
  65           to these in addition to the trunk.
  66
  67           This driver can also be built as a module.  If so, the module
  68           will be called i2c-amd756-s4882.
  69
  70 config I2C_AMD8111
  71         tristate "AMD 8111"
  72         depends on PCI
  73         help
  74           If you say yes to this option, support will be included for the
  75           second (SMBus 2.0) AMD 8111 mainboard I2C interface.
  76
  77           This driver can also be built as a module.  If so, the module
  78           will be called i2c-amd8111.
  79
  80 config I2C_HIX5HD2
  81         tristate "Hix5hd2 high-speed I2C driver"
  82         depends on ARCH_HISI || ARCH_HIX5HD2 || COMPILE_TEST
  83         help
  84           Say Y here to include support for the high-speed I2C controller
  85           used in HiSilicon hix5hd2 SoCs.
  86
  87           This driver can also be built as a module. If so, the module
  88           will be called i2c-hix5hd2.
  89
  90 config I2C_I801
  91         tristate "Intel 82801 (ICH/PCH)"
  92         depends on PCI
  93         select CHECK_SIGNATURE if X86 && DMI
  94         select I2C_SMBUS
  95         help
  96           If you say yes to this option, support will be included for the Intel
  97           801 family of mainboard I2C interfaces.  Specifically, the following
  98           versions of the chipset are supported:
  99             82801AA
 100             82801AB
 101             82801BA
 102             82801CA/CAM
 103             82801DB
 104             82801EB/ER (ICH5/ICH5R)
 105             6300ESB
 106             ICH6
 107             ICH7
 108             ESB2
 109             ICH8
 110             ICH9
 111             EP80579 (Tolapai)
 112             ICH10
 113             5/3400 Series (PCH)
 114             6 Series (PCH)
 115             Patsburg (PCH)
 116             DH89xxCC (PCH)
 117             Panther Point (PCH)
 118             Lynx Point (PCH)
 119             Lynx Point-LP (PCH)
 120             Avoton (SOC)
 121             Wellsburg (PCH)
 122             Coleto Creek (PCH)
 123             Wildcat Point (PCH)
 124             Wildcat Point-LP (PCH)
 125             BayTrail (SOC)
 126             Sunrise Point-H (PCH)
 127             Sunrise Point-LP (PCH)
 128             DNV (SOC)
 129             Broxton (SOC)
 130             Lewisburg (PCH)
 131
 132           This driver can also be built as a module.  If so, the module
 133           will be called i2c-i801.
 134
 135 config I2C_ISCH
 136         tristate "Intel SCH SMBus 1.0"
 137         depends on PCI
 138         select LPC_SCH
 139         help
 140           Say Y here if you want to use SMBus controller on the Intel SCH
 141           based systems.
 142
 143           This driver can also be built as a module. If so, the module
 144           will be called i2c-isch.
 145
 146 config I2C_ISMT
 147         tristate "Intel iSMT SMBus Controller"
 148         depends on PCI && X86
 149         help
 150           If you say yes to this option, support will be included for the Intel
 151           iSMT SMBus host controller interface.
 152
 153           This driver can also be built as a module.  If so, the module will be
 154           called i2c-ismt.
 155
 156 config I2C_PIIX4
 157         tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
 158         depends on PCI
 159         help
 160           If you say yes to this option, support will be included for the Intel
 161           PIIX4 family of mainboard I2C interfaces.  Specifically, the following
 162           versions of the chipset are supported (note that Serverworks is part
 163           of Broadcom):
 164             Intel PIIX4
 165             Intel 440MX
 166             ATI IXP200
 167             ATI IXP300
 168             ATI IXP400
 169             ATI SB600
 170             ATI SB700/SP5100
 171             ATI SB800
 172             AMD Hudson-2
 173             AMD ML
 174             AMD CZ
 175             Serverworks OSB4
 176             Serverworks CSB5
 177             Serverworks CSB6
 178             Serverworks HT-1000
 179             Serverworks HT-1100
 180             SMSC Victory66
 181
 182           Some AMD chipsets contain two PIIX4-compatible SMBus
 183           controllers. This driver will attempt to use both controllers
 184           on the SB700/SP5100, if they have been initialized by the BIOS.
 185
 186           This driver can also be built as a module.  If so, the module
 187           will be called i2c-piix4.
 188
 189 config I2C_NFORCE2
 190         tristate "Nvidia nForce2, nForce3 and nForce4"
 191         depends on PCI
 192         help
 193           If you say yes to this option, support will be included for the Nvidia
 194           nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
 195
 196           This driver can also be built as a module.  If so, the module
 197           will be called i2c-nforce2.
 198
 199 config I2C_NFORCE2_S4985
 200         tristate "SMBus multiplexing on the Tyan S4985"
 201         depends on I2C_NFORCE2 && X86
 202         help
 203           Enabling this option will add specific SMBus support for the Tyan
 204           S4985 motherboard.  On this 4-CPU board, the SMBus is multiplexed
 205           over 4 different channels, where the various memory module EEPROMs
 206           live.  Saying yes here will give you access to these in addition
 207           to the trunk.
 208
 209           This driver can also be built as a module.  If so, the module
 210           will be called i2c-nforce2-s4985.
 211
 212 config I2C_SIS5595
 213         tristate "SiS 5595"
 214         depends on PCI
 215         help
 216           If you say yes to this option, support will be included for the
 217           SiS5595 SMBus (a subset of I2C) interface.
 218
 219           This driver can also be built as a module.  If so, the module
 220           will be called i2c-sis5595.
 221
 222 config I2C_SIS630
 223         tristate "SiS 630/730/964"
 224         depends on PCI
 225         help
 226           If you say yes to this option, support will be included for the
 227           SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
 228
 229           This driver can also be built as a module.  If so, the module
 230           will be called i2c-sis630.
 231
 232 config I2C_SIS96X
 233         tristate "SiS 96x"
 234         depends on PCI
 235         help
 236           If you say yes to this option, support will be included for the SiS
 237           96x SMBus (a subset of I2C) interfaces.  Specifically, the following
 238           chipsets are supported:
 239             645/961
 240             645DX/961
 241             645DX/962
 242             648/961
 243             650/961
 244             735
 245             745
 246
 247           This driver can also be built as a module.  If so, the module
 248           will be called i2c-sis96x.
 249
 250 config I2C_VIA
 251         tristate "VIA VT82C586B"
 252         depends on PCI
 253         select I2C_ALGOBIT
 254         help
 255           If you say yes to this option, support will be included for the VIA
 256           82C586B I2C interface
 257
 258           This driver can also be built as a module.  If so, the module
 259           will be called i2c-via.
 260
 261 config I2C_VIAPRO
 262         tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
 263         depends on PCI
 264         help
 265           If you say yes to this option, support will be included for the VIA
 266           VT82C596 and later SMBus interface.  Specifically, the following
 267           chipsets are supported:
 268             VT82C596A/B
 269             VT82C686A/B
 270             VT8231
 271             VT8233/A
 272             VT8235
 273             VT8237R/A/S
 274             VT8251
 275             CX700
 276             VX800/VX820
 277             VX855/VX875
 278             VX900
 279
 280           This driver can also be built as a module.  If so, the module
 281           will be called i2c-viapro.
 282
 283 if ACPI
 284
 285 comment "ACPI drivers"
 286
 287 config I2C_SCMI
 288         tristate "SMBus Control Method Interface"
 289         help
 290           This driver supports the SMBus Control Method Interface. It needs the
 291           BIOS to declare ACPI control methods as described in the SMBus Control
 292           Method Interface specification.
 293
 294           To compile this driver as a module, choose M here:
 295           the module will be called i2c-scmi.
 296
 297 endif # ACPI
 298
 299 comment "Mac SMBus host controller drivers"
 300         depends on PPC_CHRP || PPC_PMAC
 301
 302 config I2C_HYDRA
 303         tristate "CHRP Apple Hydra Mac I/O I2C interface"
 304         depends on PCI && PPC_CHRP
 305         select I2C_ALGOBIT
 306         help
 307           This supports the use of the I2C interface in the Apple Hydra Mac
 308           I/O chip on some CHRP machines (e.g. the LongTrail).  Say Y if you
 309           have such a machine.
 310
 311           This support is also available as a module.  If so, the module
 312           will be called i2c-hydra.
 313
 314 config I2C_POWERMAC
 315         tristate "Powermac I2C interface"
 316         depends on PPC_PMAC
 317         default y
 318         help
 319           This exposes the various PowerMac i2c interfaces to the linux i2c
 320           layer and to userland. It is used by various drivers on the PowerMac
 321           platform, and should generally be enabled.
 322
 323           This support is also available as a module.  If so, the module
 324           will be called i2c-powermac.
 325
 326 comment "I2C system bus drivers (mostly embedded / system-on-chip)"
 327
 328 config I2C_AT91
 329         tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
 330         depends on ARCH_AT91
 331         help
 332           This supports the use of the I2C interface on Atmel AT91
 333           processors.
 334
 335           A serious problem is that there is no documented way to issue
 336           repeated START conditions for more than two messages, as needed
 337           to support combined I2C messages.  Use the i2c-gpio driver
 338           unless your system can cope with this limitation.
 339
 340           Caution! at91rm9200, at91sam9261, at91sam9260, at91sam9263 devices
 341           don't have clock stretching in transmission mode. For that reason,
 342           you can encounter underrun issues causing premature stop sendings if
 343           the latency to fill the transmission register is too long. If you
 344           are facing this situation, use the i2c-gpio driver.
 345
 346 config I2C_AU1550
 347         tristate "Au1550/Au1200/Au1300 SMBus interface"
 348         depends on MIPS_ALCHEMY
 349         help
 350           If you say yes to this option, support will be included for the
 351           Au1550/Au1200/Au1300 SMBus interface.
 352
 353           This driver can also be built as a module.  If so, the module
 354           will be called i2c-au1550.
 355
 356 config I2C_AXXIA
 357         tristate "Axxia I2C controller"
 358         depends on ARCH_AXXIA || COMPILE_TEST
 359         default ARCH_AXXIA
 360         help
 361           Say yes if you want to support the I2C bus on Axxia platforms.
 362
 363           Please note that this controller is limited to transfers of maximum
 364           255 bytes in length. Any attempt to to a larger transfer will return
 365           an error.
 366
 367 config I2C_BCM2835
 368         tristate "Broadcom BCM2835 I2C controller"
 369         depends on ARCH_BCM2835
 370         help
 371           If you say yes to this option, support will be included for the
 372           BCM2835 I2C controller.
 373
 374           If you don't know what to do here, say N.
 375
 376           This support is also available as a module.  If so, the module
 377           will be called i2c-bcm2835.
 378
 379 config I2C_BCM_IPROC
 380         tristate "Broadcom iProc I2C controller"
 381         depends on ARCH_BCM_IPROC || COMPILE_TEST
 382         default ARCH_BCM_IPROC
 383         help
 384           If you say yes to this option, support will be included for the
 385           Broadcom iProc I2C controller.
 386
 387           If you don't know what to do here, say N.
 388
 389 config I2C_BCM_KONA
 390         tristate "BCM Kona I2C adapter"
 391         depends on ARCH_BCM_MOBILE
 392         default y
 393         help
 394           If you say yes to this option, support will be included for the
 395           I2C interface on the Broadcom Kona family of processors.
 396
 397           If you do not need KONA I2C interface, say N.
 398
 399 config I2C_BRCMSTB
 400         tristate "BRCM Settop I2C controller"
 401         depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
 402         default y
 403         help
 404           If you say yes to this option, support will be included for the
 405           I2C interface on the Broadcom Settop SoCs.
 406
 407           If you do not need I2C interface, say N.
 408
 409 config I2C_BLACKFIN_TWI
 410         tristate "Blackfin TWI I2C support"
 411         depends on BLACKFIN
 412         depends on !BF561 && !BF531 && !BF532 && !BF533
 413         help
 414           This is the I2C bus driver for Blackfin on-chip TWI interface.
 415
 416           This driver can also be built as a module.  If so, the module
 417           will be called i2c-bfin-twi.
 418
 419 config I2C_BLACKFIN_TWI_CLK_KHZ
 420         int "Blackfin TWI I2C clock (kHz)"
 421         depends on I2C_BLACKFIN_TWI
 422         range 21 400
 423         default 50
 424         help
 425           The unit of the TWI clock is kHz.
 426
 427 config I2C_CADENCE
 428         tristate "Cadence I2C Controller"
 429         depends on ARCH_ZYNQ || ARM64 || XTENSA
 430         help
 431           Say yes here to select Cadence I2C Host Controller. This controller is
 432           e.g. used by Xilinx Zynq.
 433
 434 config I2C_CBUS_GPIO
 435         tristate "CBUS I2C driver"
 436         depends on GPIOLIB || COMPILE_TEST
 437         help
 438           Support for CBUS access using I2C API. Mostly relevant for Nokia
 439           Internet Tablets (770, N800 and N810).
 440
 441           This driver can also be built as a module.  If so, the module
 442           will be called i2c-cbus-gpio.
 443
 444 config I2C_CPM
 445         tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
 446         depends on CPM1 || CPM2
 447         help
 448           This supports the use of the I2C interface on Freescale
 449           processors with CPM1 or CPM2.
 450
 451           This driver can also be built as a module.  If so, the module
 452           will be called i2c-cpm.
 453
 454 config I2C_DAVINCI
 455         tristate "DaVinci I2C driver"
 456         depends on ARCH_DAVINCI || ARCH_KEYSTONE
 457         help
 458           Support for TI DaVinci I2C controller driver.
 459
 460           This driver can also be built as a module.  If so, the module
 461           will be called i2c-davinci.
 462
 463           Please note that this driver might be needed to bring up other
 464           devices such as DaVinci NIC.
 465           For details please see http://www.ti.com/davinci
 466
 467 config I2C_DESIGNWARE_CORE
 468         tristate
 469
 470 config I2C_DESIGNWARE_PLATFORM
 471         tristate "Synopsys DesignWare Platform"
 472         select I2C_DESIGNWARE_CORE
 473         depends on (ACPI && COMMON_CLK) || !ACPI
 474         help
 475           If you say yes to this option, support will be included for the
 476           Synopsys DesignWare I2C adapter. Only master mode is supported.
 477
 478           This driver can also be built as a module.  If so, the module
 479           will be called i2c-designware-platform.
 480
 481 config I2C_DESIGNWARE_PCI
 482         tristate "Synopsys DesignWare PCI"
 483         depends on PCI
 484         select I2C_DESIGNWARE_CORE
 485         help
 486           If you say yes to this option, support will be included for the
 487           Synopsys DesignWare I2C adapter. Only master mode is supported.
 488
 489           This driver can also be built as a module.  If so, the module
 490           will be called i2c-designware-pci.
 491
 492 config I2C_DESIGNWARE_BAYTRAIL
 493         bool "Intel Baytrail I2C semaphore support"
 494         depends on ACPI
 495         depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
 496                    (I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
 497         help
 498           This driver enables managed host access to the PMIC I2C bus on select
 499           Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows
 500           the host to request uninterrupted access to the PMIC's I2C bus from
 501           the platform firmware controlling it. You should say Y if running on
 502           a BayTrail system using the AXP288.
 503
 504 config I2C_DIGICOLOR
 505         tristate "Conexant Digicolor I2C driver"
 506         depends on ARCH_DIGICOLOR
 507         help
 508           Support for Conexant Digicolor SoCs (CX92755) I2C controller driver.
 509
 510           This driver can also be built as a module.  If so, the module
 511           will be called i2c-digicolor.
 512
 513 config I2C_EFM32
 514         tristate "EFM32 I2C controller"
 515         depends on ARCH_EFM32 || COMPILE_TEST
 516         help
 517           This driver supports the i2c block found in Energy Micro's EFM32
 518           SoCs.
 519
 520 config I2C_EG20T
 521         tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
 522         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 523         help
 524           This driver is for PCH(Platform controller Hub) I2C of EG20T which
 525           is an IOH(Input/Output Hub) for x86 embedded processor.
 526           This driver can access PCH I2C bus device.
 527
 528           This driver also can be used for LAPIS Semiconductor IOH(Input/
 529           Output Hub), ML7213, ML7223 and ML7831.
 530           ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
 531           for MP(Media Phone) use and ML7831 IOH is for general purpose use.
 532           ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
 533           ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 534
 535 config I2C_EMEV2
 536         tristate "EMMA Mobile series I2C adapter"
 537         depends on HAVE_CLK
 538         select I2C_SLAVE
 539         help
 540           If you say yes to this option, support will be included for the
 541           I2C interface on the Renesas Electronics EM/EV family of processors.
 542
 543 config I2C_EXYNOS5
 544         tristate "Exynos5 high-speed I2C driver"
 545         depends on ARCH_EXYNOS && OF
 546         default y
 547         help
 548           High-speed I2C controller on Exynos5 based Samsung SoCs.
 549
 550 config I2C_GPIO
 551         tristate "GPIO-based bitbanging I2C"
 552         depends on GPIOLIB || COMPILE_TEST
 553         select I2C_ALGOBIT
 554         help
 555           This is a very simple bitbanging I2C driver utilizing the
 556           arch-neutral GPIO API to control the SCL and SDA lines.
 557
 558 config I2C_HIGHLANDER
 559         tristate "Highlander FPGA SMBus interface"
 560         depends on SH_HIGHLANDER
 561         help
 562           If you say yes to this option, support will be included for
 563           the SMBus interface located in the FPGA on various Highlander
 564           boards, particularly the R0P7780LC0011RL and R0P7785LC0011RL
 565           FPGAs. This is wholly unrelated to the SoC I2C.
 566
 567           This driver can also be built as a module.  If so, the module
 568           will be called i2c-highlander.
 569
 570 config I2C_IBM_IIC
 571         tristate "IBM PPC 4xx on-chip I2C interface"
 572         depends on 4xx
 573         help
 574           Say Y here if you want to use IIC peripheral found on
 575           embedded IBM PPC 4xx based systems.
 576
 577           This driver can also be built as a module.  If so, the module
 578           will be called i2c-ibm_iic.
 579
 580 config I2C_IMG
 581         tristate "Imagination Technologies I2C SCB Controller"
 582         depends on MIPS || METAG || COMPILE_TEST
 583         help
 584           Say Y here if you want to use the IMG I2C SCB controller,
 585           available on the TZ1090 and other IMG SoCs.
 586
 587           This driver can also be built as a module.  If so, the module
 588           will be called i2c-img-scb.
 589
 590 config I2C_IMX
 591         tristate "IMX I2C interface"
 592         depends on ARCH_MXC || ARCH_LAYERSCAPE || COLDFIRE
 593         help
 594           Say Y here if you want to use the IIC bus controller on
 595           the Freescale i.MX/MXC, Layerscape or ColdFire processors.
 596
 597           This driver can also be built as a module.  If so, the module
 598           will be called i2c-imx.
 599
 600 config I2C_IMX_LPI2C
 601         tristate "IMX Low Power I2C interface"
 602         depends on ARCH_MXC || COMPILE_TEST
 603         help
 604           Say Y here if you want to use the Low Power IIC bus controller
 605           on the Freescale i.MX processors.
 606
 607           This driver can also be built as a module. If so, the module
 608           will be called i2c-imx-lpi2c.
 609
 610 config I2C_IOP3XX
 611         tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
 612         depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
 613         help
 614           Say Y here if you want to use the IIC bus controller on
 615           the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
 616
 617           This driver can also be built as a module.  If so, the module
 618           will be called i2c-iop3xx.
 619
 620 config I2C_JZ4780
 621         tristate "JZ4780 I2C controller interface support"
 622         depends on MACH_JZ4780 || COMPILE_TEST
 623         help
 624          If you say yes to this option, support will be included for the
 625          Ingenic JZ4780 I2C controller.
 626
 627          If you don't know what to do here, say N.
 628
 629 config I2C_KEMPLD
 630         tristate "Kontron COM I2C Controller"
 631         depends on MFD_KEMPLD
 632         help
 633           This enables support for the I2C bus interface on some Kontron ETX
 634           and COMexpress (ETXexpress) modules.
 635
 636           This driver can also be built as a module. If so, the module
 637           will be called i2c-kempld.
 638
 639 config I2C_LPC2K
 640         tristate "I2C bus support for NXP LPC2K/LPC178x/18xx/43xx"
 641         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
 642         help
 643           This driver supports the I2C interface found several NXP
 644           devices including LPC2xxx, LPC178x/7x and LPC18xx/43xx.
 645
 646           This driver can also be built as a module.  If so, the module
 647           will be called i2c-lpc2k.
 648
 649 config I2C_MESON
 650         tristate "Amlogic Meson I2C controller"
 651         depends on ARCH_MESON || COMPILE_TEST
 652         help
 653           If you say yes to this option, support will be included for the
 654           I2C interface on the Amlogic Meson family of SoCs.
 655
 656 config I2C_MPC
 657         tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
 658         depends on PPC
 659         help
 660           If you say yes to this option, support will be included for the
 661           built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
 662           MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
 663
 664           This driver can also be built as a module.  If so, the module
 665           will be called i2c-mpc.
 666
 667 config I2C_MT65XX
 668         tristate "MediaTek I2C adapter"
 669         depends on ARCH_MEDIATEK || COMPILE_TEST
 670         depends on HAS_DMA
 671         help
 672           This selects the MediaTek(R) Integrated Inter Circuit bus driver
 673           for MT65xx and MT81xx.
 674           If you want to use MediaTek(R) I2C interface, say Y or M here.
 675           If unsure, say N.
 676
 677 config I2C_MV64XXX
 678         tristate "Marvell mv64xxx I2C Controller"
 679         depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU
 680         help
 681           If you say yes to this option, support will be included for the
 682           built-in I2C interface on the Marvell 64xxx line of host bridges.
 683           This driver is also used for Allwinner SoCs I2C controllers.
 684
 685           This driver can also be built as a module.  If so, the module
 686           will be called i2c-mv64xxx.
 687
 688 config I2C_MXS
 689         tristate "Freescale i.MX28 I2C interface"
 690         depends on SOC_IMX28
 691         select STMP_DEVICE
 692         help
 693           Say Y here if you want to use the I2C bus controller on
 694           the Freescale i.MX28 processors.
 695
 696           This driver can also be built as a module.  If so, the module
 697           will be called i2c-mxs.
 698
 699 config I2C_NOMADIK
 700         tristate "ST-Ericsson Nomadik/Ux500 I2C Controller"
 701         depends on ARM_AMBA
 702         help
 703           If you say yes to this option, support will be included for the
 704           I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
 705           as well as the STA2X11 PCIe I/O HUB.
 706
 707 config I2C_OCORES
 708         tristate "OpenCores I2C Controller"
 709         help
 710           If you say yes to this option, support will be included for the
 711           OpenCores I2C controller. For details see
 712           http://www.opencores.org/projects.cgi/web/i2c/overview
 713
 714           This driver can also be built as a module.  If so, the module
 715           will be called i2c-ocores.
 716
 717 config I2C_OMAP
 718         tristate "OMAP I2C adapter"
 719         depends on ARCH_OMAP
 720         default y if MACH_OMAP_H3 || MACH_OMAP_OSK
 721         help
 722           If you say yes to this option, support will be included for the
 723           I2C interface on the Texas Instruments OMAP1/2 family of processors.
 724           Like OMAP1510/1610/1710/5912 and OMAP242x.
 725           For details see http://www.ti.com/omap.
 726
 727 config I2C_PASEMI
 728         tristate "PA Semi SMBus interface"
 729         depends on PPC_PASEMI && PCI
 730         help
 731           Supports the PA Semi PWRficient on-chip SMBus interfaces.
 732
 733 config I2C_PCA_PLATFORM
 734         tristate "PCA9564/PCA9665 as platform device"
 735         select I2C_ALGOPCA
 736         default n
 737         help
 738           This driver supports a memory mapped Philips PCA9564/PCA9665
 739           parallel bus to I2C bus controller.
 740
 741           This driver can also be built as a module.  If so, the module
 742           will be called i2c-pca-platform.
 743
 744 config I2C_PMCMSP
 745         tristate "PMC MSP I2C TWI Controller"
 746         depends on PMC_MSP
 747         help
 748           This driver supports the PMC TWI controller on MSP devices.
 749
 750           This driver can also be built as module. If so, the module
 751           will be called i2c-pmcmsp.
 752
 753 config I2C_PNX
 754         tristate "I2C bus support for Philips PNX and NXP LPC targets"
 755         depends on ARCH_LPC32XX
 756         help
 757           This driver supports the Philips IP3204 I2C IP block master and/or
 758           slave controller
 759
 760           This driver can also be built as a module.  If so, the module
 761           will be called i2c-pnx.
 762
 763 config I2C_PUV3
 764         tristate "PKUnity v3 I2C bus support"
 765         depends on UNICORE32 && ARCH_PUV3
 766         select I2C_ALGOBIT
 767         help
 768           This driver supports the I2C IP inside the PKUnity-v3 SoC.
 769           This I2C bus controller is under AMBA/AXI bus.
 770
 771           This driver can also be built as a module.  If so, the module
 772           will be called i2c-puv3.
 773
 774 config I2C_PXA
 775         tristate "Intel PXA2XX I2C adapter"
 776         depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF)
 777         help
 778           If you have devices in the PXA I2C bus, say yes to this option.
 779           This driver can also be built as a module.  If so, the module
 780           will be called i2c-pxa.
 781
 782 config I2C_PXA_PCI
 783         def_bool I2C_PXA && X86_32 && PCI && OF
 784
 785 config I2C_PXA_SLAVE
 786         bool "Intel PXA2XX I2C Slave comms support"
 787         depends on I2C_PXA && !X86_32
 788         help
 789           Support I2C slave mode communications on the PXA I2C bus.  This
 790           is necessary for systems where the PXA may be a target on the
 791           I2C bus.
 792
 793 config I2C_QUP
 794         tristate "Qualcomm QUP based I2C controller"
 795         depends on ARCH_QCOM
 796         help
 797           If you say yes to this option, support will be included for the
 798           built-in I2C interface on the Qualcomm SoCs.
 799
 800           This driver can also be built as a module.  If so, the module
 801           will be called i2c-qup.
 802
 803 config I2C_RIIC
 804         tristate "Renesas RIIC adapter"
 805         depends on ARCH_RENESAS || COMPILE_TEST
 806         help
 807           If you say yes to this option, support will be included for the
 808           Renesas RIIC I2C interface.
 809
 810           This driver can also be built as a module.  If so, the module
 811           will be called i2c-riic.
 812
 813 config I2C_RK3X
 814         tristate "Rockchip RK3xxx I2C adapter"
 815         depends on OF && COMMON_CLK
 816         help
 817           Say Y here to include support for the I2C adapter in Rockchip RK3xxx
 818           SoCs.
 819
 820           This driver can also be built as a module. If so, the module will
 821           be called i2c-rk3x.
 822
 823 config HAVE_S3C2410_I2C
 824         bool
 825         help
 826           This will include I2C support for Samsung SoCs. If you want to
 827           include I2C support for any machine, kindly select this in the
 828           respective Kconfig file.
 829
 830 config I2C_S3C2410
 831         tristate "S3C2410 I2C Driver"
 832         depends on HAVE_S3C2410_I2C
 833         help
 834           Say Y here to include support for I2C controller in the
 835           Samsung SoCs.
 836
 837 config I2C_SH7760
 838         tristate "Renesas SH7760 I2C Controller"
 839         depends on CPU_SUBTYPE_SH7760
 840         help
 841           This driver supports the 2 I2C interfaces on the Renesas SH7760.
 842
 843           This driver can also be built as a module.  If so, the module
 844           will be called i2c-sh7760.
 845
 846 config I2C_SH_MOBILE
 847         tristate "SuperH Mobile I2C Controller"
 848         depends on HAS_DMA
 849         depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
 850         help
 851           If you say yes to this option, support will be included for the
 852           built-in I2C interface on the Renesas SH-Mobile processor.
 853
 854           This driver can also be built as a module.  If so, the module
 855           will be called i2c-sh_mobile.
 856
 857 config I2C_SIMTEC
 858         tristate "Simtec Generic I2C interface"
 859         select I2C_ALGOBIT
 860         help
 861           If you say yes to this option, support will be included for
 862           the Simtec Generic I2C interface. This driver is for the
 863           simple I2C bus used on newer Simtec products for general
 864           I2C, such as DDC on the Simtec BBD2016A.
 865
 866           This driver can also be built as a module. If so, the module
 867           will be called i2c-simtec.
 868
 869 config I2C_SIRF
 870         tristate "CSR SiRFprimaII I2C interface"
 871         depends on ARCH_SIRF
 872         help
 873           If you say yes to this option, support will be included for the
 874           CSR SiRFprimaII I2C interface.
 875
 876           This driver can also be built as a module.  If so, the module
 877           will be called i2c-sirf.
 878
 879 config I2C_ST
 880         tristate "STMicroelectronics SSC I2C support"
 881         depends on ARCH_STI
 882         help
 883           Enable this option to add support for STMicroelectronics SoCs
 884           hardware SSC (Synchronous Serial Controller) as an I2C controller.
 885
 886           This driver can also be built as module. If so, the module
 887           will be called i2c-st.
 888
 889 config I2C_STU300
 890         tristate "ST Microelectronics DDC I2C interface"
 891         depends on MACH_U300
 892         default y if MACH_U300
 893         help
 894           If you say yes to this option, support will be included for the
 895           I2C interface from ST Microelectronics simply called "DDC I2C"
 896           supporting both I2C and DDC, used in e.g. the U300 series
 897           mobile platforms.
 898
 899           This driver can also be built as a module. If so, the module
 900           will be called i2c-stu300.
 901
 902 config I2C_SUN6I_P2WI
 903         tristate "Allwinner sun6i internal P2WI controller"
 904         depends on RESET_CONTROLLER
 905         depends on MACH_SUN6I || COMPILE_TEST
 906         help
 907           If you say yes to this option, support will be included for the
 908           P2WI (Push/Pull 2 Wire Interface) controller embedded in some sunxi
 909           SOCs.
 910           The P2WI looks like an SMBus controller (which supports only byte
 911           accesses), except that it only supports one slave device.
 912           This interface is used to connect to specific PMIC devices (like the
 913           AXP221).
 914
 915 config I2C_TEGRA
 916         tristate "NVIDIA Tegra internal I2C controller"
 917         depends on ARCH_TEGRA
 918         help
 919           If you say yes to this option, support will be included for the
 920           I2C controller embedded in NVIDIA Tegra SOCs
 921
 922 config I2C_UNIPHIER
 923         tristate "UniPhier FIFO-less I2C controller"
 924         depends on ARCH_UNIPHIER || COMPILE_TEST
 925         help
 926           If you say yes to this option, support will be included for
 927           the UniPhier FIFO-less I2C interface embedded in PH1-LD4, PH1-sLD8,
 928           or older UniPhier SoCs.
 929
 930 config I2C_UNIPHIER_F
 931         tristate "UniPhier FIFO-builtin I2C controller"
 932         depends on ARCH_UNIPHIER || COMPILE_TEST
 933         help
 934           If you say yes to this option, support will be included for
 935           the UniPhier FIFO-builtin I2C interface embedded in PH1-Pro4,
 936           PH1-Pro5, or newer UniPhier SoCs.
 937
 938 config I2C_VERSATILE
 939         tristate "ARM Versatile/Realview I2C bus support"
 940         depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS || COMPILE_TEST
 941         select I2C_ALGOBIT
 942         help
 943           Say yes if you want to support the I2C serial bus on ARMs Versatile
 944           range of platforms.
 945
 946           This driver can also be built as a module.  If so, the module
 947           will be called i2c-versatile.
 948
 949 config I2C_WMT
 950         tristate "Wondermedia WM8xxx SoC I2C bus support"
 951         depends on ARCH_VT8500
 952         help
 953           Say yes if you want to support the I2C bus on Wondermedia 8xxx-series
 954           SoCs.
 955
 956           This driver can also be built as a module. If so, the module will be
 957           called i2c-wmt.
 958
 959 config I2C_OCTEON
 960         tristate "Cavium OCTEON I2C bus support"
 961         depends on CAVIUM_OCTEON_SOC
 962         help
 963           Say yes if you want to support the I2C serial bus on Cavium
 964           OCTEON SOC.
 965
 966           This driver can also be built as a module.  If so, the module
 967           will be called i2c-octeon.
 968
 969 config I2C_THUNDERX
 970         tristate "Cavium ThunderX I2C bus support"
 971         depends on 64BIT && PCI && (ARM64 || COMPILE_TEST)
 972         select I2C_SMBUS
 973         help
 974           Say yes if you want to support the I2C serial bus on Cavium
 975           ThunderX SOC.
 976
 977           This driver can also be built as a module.  If so, the module
 978           will be called i2c-thunderx.
 979
 980 config I2C_XILINX
 981         tristate "Xilinx I2C Controller"
 982         depends on HAS_IOMEM
 983         help
 984           If you say yes to this option, support will be included for the
 985           Xilinx I2C controller.
 986
 987           This driver can also be built as a module.  If so, the module
 988           will be called xilinx_i2c.
 989
 990 config I2C_XLR
 991         tristate "Netlogic XLR and Sigma Designs I2C support"
 992         depends on CPU_XLR || ARCH_TANGO
 993         help
 994           This driver enables support for the on-chip I2C interface of
 995           the Netlogic XLR/XLS MIPS processors and Sigma Designs SOCs.
 996
 997           This driver can also be built as a module.  If so, the module
 998           will be called i2c-xlr.
 999
1000 config I2C_XLP9XX
1001         tristate "XLP9XX I2C support"
1002         depends on CPU_XLP || ARCH_VULCAN || COMPILE_TEST
1003         help
1004           This driver enables support for the on-chip I2C interface of
1005           the Broadcom XLP9xx/XLP5xx MIPS and Vulcan ARM64 processors.
1006
1007           This driver can also be built as a module.  If so, the module will
1008           be called i2c-xlp9xx.
1009
1010 config I2C_RCAR
1011         tristate "Renesas R-Car I2C Controller"
1012         depends on HAS_DMA
1013         depends on ARCH_RENESAS || COMPILE_TEST
1014         select I2C_SLAVE
1015         help
1016           If you say yes to this option, support will be included for the
1017           R-Car I2C controller.
1018
1019           This driver can also be built as a module.  If so, the module
1020           will be called i2c-rcar.
1021
1022 comment "External I2C/SMBus adapter drivers"
1023
1024 config I2C_DIOLAN_U2C
1025         tristate "Diolan U2C-12 USB adapter"
1026         depends on USB
1027         help
1028           If you say yes to this option, support will be included for Diolan
1029           U2C-12, a USB to I2C interface.
1030
1031           This driver can also be built as a module.  If so, the module
1032           will be called i2c-diolan-u2c.
1033
1034 config I2C_DLN2
1035        tristate "Diolan DLN-2 USB I2C adapter"
1036        depends on MFD_DLN2
1037        help
1038          If you say yes to this option, support will be included for Diolan
1039          DLN2, a USB to I2C interface.
1040
1041          This driver can also be built as a module.  If so, the module
1042          will be called i2c-dln2.
1043
1044 config I2C_PARPORT
1045         tristate "Parallel port adapter"
1046         depends on PARPORT
1047         select I2C_ALGOBIT
1048         select I2C_SMBUS
1049         help
1050           This supports parallel port I2C adapters such as the ones made by
1051           Philips or Velleman, Analog Devices evaluation boards, and more.
1052           Basically any adapter using the parallel port as an I2C bus with
1053           no extra chipset is supported by this driver, or could be.
1054
1055           This driver is a replacement for (and was inspired by) an older
1056           driver named i2c-philips-par.  The new driver supports more devices,
1057           and makes it easier to add support for new devices.
1058
1059           An adapter type parameter is now mandatory.  Please read the file
1060           Documentation/i2c/busses/i2c-parport for details.
1061
1062           Another driver exists, named i2c-parport-light, which doesn't depend
1063           on the parport driver.  This is meant for embedded systems. Don't say
1064           Y here if you intend to say Y or M there.
1065
1066           This support is also available as a module.  If so, the module
1067           will be called i2c-parport.
1068
1069 config I2C_PARPORT_LIGHT
1070         tristate "Parallel port adapter (light)"
1071         select I2C_ALGOBIT
1072         select I2C_SMBUS
1073         help
1074           This supports parallel port I2C adapters such as the ones made by
1075           Philips or Velleman, Analog Devices evaluation boards, and more.
1076           Basically any adapter using the parallel port as an I2C bus with
1077           no extra chipset is supported by this driver, or could be.
1078
1079           This driver is a light version of i2c-parport.  It doesn't depend
1080           on the parport driver, and uses direct I/O access instead.  This
1081           might be preferred on embedded systems where wasting memory for
1082           the clean but heavy parport handling is not an option.  The
1083           drawback is a reduced portability and the impossibility to
1084           daisy-chain other parallel port devices.
1085
1086           Don't say Y here if you said Y or M to i2c-parport.  Saying M to
1087           both is possible but both modules should not be loaded at the same
1088           time.
1089
1090           This support is also available as a module.  If so, the module
1091           will be called i2c-parport-light.
1092
1093 config I2C_ROBOTFUZZ_OSIF
1094         tristate "RobotFuzz Open Source InterFace USB adapter"
1095         depends on USB
1096         help
1097           If you say yes to this option, support will be included for the
1098           RobotFuzz Open Source InterFace USB to I2C interface.
1099
1100           This driver can also be built as a module.  If so, the module
1101           will be called i2c-osif.
1102
1103 config I2C_TAOS_EVM
1104         tristate "TAOS evaluation module"
1105         depends on TTY
1106         select SERIO
1107         select SERIO_SERPORT
1108         default n
1109         help
1110           This supports TAOS evaluation modules on serial port. In order to
1111           use this driver, you will need the inputattach tool, which is part
1112           of the input-utils package.
1113
1114           If unsure, say N.
1115
1116           This support is also available as a module.  If so, the module
1117           will be called i2c-taos-evm.
1118
1119 config I2C_TINY_USB
1120         tristate "Tiny-USB adapter"
1121         depends on USB
1122         help
1123           If you say yes to this option, support will be included for the
1124           i2c-tiny-usb, a simple do-it-yourself USB to I2C interface. See
1125           http://www.harbaum.org/till/i2c_tiny_usb for hardware details.
1126
1127           This driver can also be built as a module.  If so, the module
1128           will be called i2c-tiny-usb.
1129
1130 config I2C_VIPERBOARD
1131         tristate "Viperboard I2C master support"
1132         depends on MFD_VIPERBOARD && USB
1133         help
1134           Say yes here to access the I2C part of the Nano River
1135           Technologies Viperboard as I2C master.
1136           See viperboard API specification and Nano
1137           River Tech's viperboard.h for detailed meaning
1138           of the module parameters.
1139
1140 comment "Other I2C/SMBus bus drivers"
1141
1142 config I2C_ACORN
1143         tristate "Acorn IOC/IOMD I2C bus support"
1144         depends on ARCH_ACORN
1145         default y
1146         select I2C_ALGOBIT
1147         help
1148           Say yes if you want to support the I2C bus on Acorn platforms.
1149
1150           If you don't know, say Y.
1151
1152 config I2C_ELEKTOR
1153         tristate "Elektor ISA card"
1154         depends on ISA && HAS_IOPORT_MAP && BROKEN_ON_SMP
1155         select I2C_ALGOPCF
1156         help
1157           This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
1158           such an adapter.
1159
1160           This support is also available as a module.  If so, the module
1161           will be called i2c-elektor.
1162
1163 config I2C_MLXCPLD
1164         tristate "Mellanox I2C driver"
1165         depends on X86_64
1166         help
1167           This exposes the Mellanox platform I2C busses to the linux I2C layer
1168           for X86 based systems.
1169           Controller is implemented as CPLD logic.
1170
1171           This driver can also be built as a module. If so, the module will be
1172           called as i2c-mlxcpld.
1173
1174 config I2C_PCA_ISA
1175         tristate "PCA9564/PCA9665 on an ISA bus"
1176         depends on ISA
1177         select I2C_ALGOPCA
1178         default n
1179         help
1180           This driver supports ISA boards using the Philips PCA9564/PCA9665
1181           parallel bus to I2C bus controller.
1182
1183           This driver can also be built as a module.  If so, the module
1184           will be called i2c-pca-isa.
1185
1186           This device is almost undetectable and using this driver on a
1187           system which doesn't have this device will result in long
1188           delays when I2C/SMBus chip drivers are loaded (e.g. at boot
1189           time).  If unsure, say N.
1190
1191 config I2C_SIBYTE
1192         tristate "SiByte SMBus interface"
1193         depends on SIBYTE_SB1xxx_SOC
1194         help
1195           Supports the SiByte SOC on-chip I2C interfaces (2 channels).
1196
1197 config I2C_CROS_EC_TUNNEL
1198         tristate "ChromeOS EC tunnel I2C bus"
1199         depends on MFD_CROS_EC
1200         help
1201           If you say yes here you get an I2C bus that will tunnel i2c commands
1202           through to the other side of the ChromeOS EC to the i2c bus
1203           connected there. This will work whatever the interface used to
1204           talk to the EC (SPI, I2C or LPC).
1205
1206 config I2C_XGENE_SLIMPRO
1207         tristate "APM X-Gene SoC I2C SLIMpro devices support"
1208         depends on ARCH_XGENE && MAILBOX
1209         help
1210           Enable I2C bus access using the APM X-Gene SoC SLIMpro
1211           co-processor. The I2C device access the I2C bus via the X-Gene
1212           to SLIMpro (On chip coprocessor) mailbox mechanism.
1213           If unsure, say N.
1214
1215 config SCx200_ACB
1216         tristate "Geode ACCESS.bus support"
1217         depends on X86_32 && PCI
1218         help
1219           Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
1220           SC1100 processors and the CS5535 and CS5536 Geode companion devices.
1221
1222           If you don't know what to do here, say N.
1223
1224           This support is also available as a module.  If so, the module
1225           will be called scx200_acb.
1226
1227 config I2C_OPAL
1228         tristate "IBM OPAL I2C driver"
1229         depends on PPC_POWERNV
1230         default y
1231         help
1232           This exposes the PowerNV platform i2c busses to the linux i2c layer,
1233           the driver is based on the OPAL interfaces.
1234
1235           This driver can also be built as a module. If so, the module will be
1236           called as i2c-opal.
1237
1238 endmenu