drivers/i2c/busses/i2c-mxs.c

   1 /*
   2  * Freescale MXS I2C bus driver
   3  *
   4  * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
   5  *
   6  * based on a (non-working) driver which was:
   7  *
   8  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
   9  *
  10  * TODO: add dma-support if platform-support for it is available
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License as published by
  14  * the Free Software Foundation; either version 2 of the License, or
  15  * (at your option) any later version.
  16  *
  17  */
  18
  19 #include <linux/slab.h>
  20 #include <linux/device.h>
  21 #include <linux/module.h>
  22 #include <linux/i2c.h>
  23 #include <linux/err.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/completion.h>
  26 #include <linux/platform_device.h>
  27 #include <linux/jiffies.h>
  28 #include <linux/io.h>
  29
  30 #include <mach/common.h>
  31
  32 #define DRIVER_NAME "mxs-i2c"
  33
  34 #define MXS_I2C_CTRL0           (0x00)
  35 #define MXS_I2C_CTRL0_SET       (0x04)
  36
  37 #define MXS_I2C_CTRL0_SFTRST                    0x80000000
  38 #define MXS_I2C_CTRL0_SEND_NAK_ON_LAST          0x02000000
  39 #define MXS_I2C_CTRL0_RETAIN_CLOCK              0x00200000
  40 #define MXS_I2C_CTRL0_POST_SEND_STOP            0x00100000
  41 #define MXS_I2C_CTRL0_PRE_SEND_START            0x00080000
  42 #define MXS_I2C_CTRL0_MASTER_MODE               0x00020000
  43 #define MXS_I2C_CTRL0_DIRECTION                 0x00010000
  44 #define MXS_I2C_CTRL0_XFER_COUNT(v)             ((v) & 0x0000FFFF)
  45
  46 #define MXS_I2C_CTRL1           (0x40)
  47 #define MXS_I2C_CTRL1_SET       (0x44)
  48 #define MXS_I2C_CTRL1_CLR       (0x48)
  49
  50 #define MXS_I2C_CTRL1_BUS_FREE_IRQ              0x80
  51 #define MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ     0x40
  52 #define MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ          0x20
  53 #define MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ    0x10
  54 #define MXS_I2C_CTRL1_EARLY_TERM_IRQ            0x08
  55 #define MXS_I2C_CTRL1_MASTER_LOSS_IRQ           0x04
  56 #define MXS_I2C_CTRL1_SLAVE_STOP_IRQ            0x02
  57 #define MXS_I2C_CTRL1_SLAVE_IRQ                 0x01
  58
  59 #define MXS_I2C_IRQ_MASK        (MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ | \
  60                                  MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ | \
  61                                  MXS_I2C_CTRL1_EARLY_TERM_IRQ | \
  62                                  MXS_I2C_CTRL1_MASTER_LOSS_IRQ | \
  63                                  MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \
  64                                  MXS_I2C_CTRL1_SLAVE_IRQ)
  65
  66 #define MXS_I2C_QUEUECTRL       (0x60)
  67 #define MXS_I2C_QUEUECTRL_SET   (0x64)
  68 #define MXS_I2C_QUEUECTRL_CLR   (0x68)
  69
  70 #define MXS_I2C_QUEUECTRL_QUEUE_RUN             0x20
  71 #define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE        0x04
  72
  73 #define MXS_I2C_QUEUESTAT       (0x70)
  74 #define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY        0x00002000
  75 #define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK  0x0000001F
  76
  77 #define MXS_I2C_QUEUECMD        (0x80)
  78
  79 #define MXS_I2C_QUEUEDATA       (0x90)
  80
  81 #define MXS_I2C_DATA            (0xa0)
  82
  83
  84 #define MXS_CMD_I2C_SELECT      (MXS_I2C_CTRL0_RETAIN_CLOCK |   \
  85                                  MXS_I2C_CTRL0_PRE_SEND_START | \
  86                                  MXS_I2C_CTRL0_MASTER_MODE |    \
  87                                  MXS_I2C_CTRL0_DIRECTION |      \
  88                                  MXS_I2C_CTRL0_XFER_COUNT(1))
  89
  90 #define MXS_CMD_I2C_WRITE       (MXS_I2C_CTRL0_PRE_SEND_START | \
  91                                  MXS_I2C_CTRL0_MASTER_MODE |    \
  92                                  MXS_I2C_CTRL0_DIRECTION)
  93
  94 #define MXS_CMD_I2C_READ        (MXS_I2C_CTRL0_SEND_NAK_ON_LAST | \
  95                                  MXS_I2C_CTRL0_MASTER_MODE)
  96
  97 /**
  98  * struct mxs_i2c_dev - per device, private MXS-I2C data
  99  *
 100  * @dev: driver model device node
 101  * @regs: IO registers pointer
 102  * @cmd_complete: completion object for transaction wait
 103  * @cmd_err: error code for last transaction
 104  * @adapter: i2c subsystem adapter node
 105  */
 106 struct mxs_i2c_dev {
 107         struct device *dev;
 108         void __iomem *regs;
 109         struct completion cmd_complete;
 110         u32 cmd_err;
 111         struct i2c_adapter adapter;
 112 };
 113
 114 /*
 115  * TODO: check if calls to here are really needed. If not, we could get rid of
 116  * mxs_reset_block and the mach-dependency. Needs an I2C analyzer, probably.
 117  */
 118 static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
 119 {
 120         mxs_reset_block(i2c->regs);
 121         writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
 122         writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
 123                         i2c->regs + MXS_I2C_QUEUECTRL_SET);
 124 }
 125
 126 static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len,
 127                                         int flags)
 128 {
 129         u32 data;
 130
 131         writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD);
 132
 133         data = (addr << 1) | I2C_SMBUS_READ;
 134         writel(data, i2c->regs + MXS_I2C_DATA);
 135
 136         data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags;
 137         writel(data, i2c->regs + MXS_I2C_QUEUECMD);
 138 }
 139
 140 static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c,
 141                                     u8 addr, u8 *buf, int len, int flags)
 142 {
 143         u32 data;
 144         int i, shifts_left;
 145
 146         data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags;
 147         writel(data, i2c->regs + MXS_I2C_QUEUECMD);
 148
 149         /*
 150          * We have to copy the slave address (u8) and buffer (arbitrary number
 151          * of u8) into the data register (u32). To achieve that, the u8 are put
 152          * into the MSBs of 'data' which is then shifted for the next u8. When
 153          * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
 154          * looks like this:
 155          *
 156          *  3          2          1          0
 157          * 10987654|32109876|54321098|76543210
 158          * --------+--------+--------+--------
 159          * buffer+2|buffer+1|buffer+0|slave_addr
 160          */
 161
 162         data = ((addr << 1) | I2C_SMBUS_WRITE) << 24;
 163
 164         for (i = 0; i < len; i++) {
 165                 data >>= 8;
 166                 data |= buf[i] << 24;
 167                 if ((i & 3) == 2)
 168                         writel(data, i2c->regs + MXS_I2C_DATA);
 169         }
 170
 171         /* Write out the remaining bytes if any */
 172         shifts_left = 24 - (i & 3) * 8;
 173         if (shifts_left)
 174                 writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA);
 175 }
 176
 177 /*
 178  * TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the
 179  * rd_threshold to 1). Couldn't get this to work, though.
 180  */
 181 static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c)
 182 {
 183         unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 184
 185         while (readl(i2c->regs + MXS_I2C_QUEUESTAT)
 186                         & MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) {
 187                         if (time_after(jiffies, timeout))
 188                                 return -ETIMEDOUT;
 189                         cond_resched();
 190         }
 191
 192         return 0;
 193 }
 194
 195 static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len)
 196 {
 197         u32 data;
 198         int i;
 199
 200         for (i = 0; i < len; i++) {
 201                 if ((i & 3) == 0) {
 202                         if (mxs_i2c_wait_for_data(i2c))
 203                                 return -ETIMEDOUT;
 204                         data = readl(i2c->regs + MXS_I2C_QUEUEDATA);
 205                 }
 206                 buf[i] = data & 0xff;
 207                 data >>= 8;
 208         }
 209
 210         return 0;
 211 }
 212
 213 /*
 214  * Low level master read/write transaction.
 215  */
 216 static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 217                                 int stop)
 218 {
 219         struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
 220         int ret;
 221         int flags;
 222
 223         dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
 224                 msg->addr, msg->len, msg->flags, stop);
 225
 226         if (msg->len == 0)
 227                 return -EINVAL;
 228
 229         init_completion(&i2c->cmd_complete);
 230         i2c->cmd_err = 0;
 231
 232         flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
 233
 234         if (msg->flags & I2C_M_RD)
 235                 mxs_i2c_pioq_setup_read(i2c, msg->addr, msg->len, flags);
 236         else
 237                 mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, msg->len,
 238                                         flags);
 239
 240         writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
 241                         i2c->regs + MXS_I2C_QUEUECTRL_SET);
 242
 243         ret = wait_for_completion_timeout(&i2c->cmd_complete,
 244                                                 msecs_to_jiffies(1000));
 245         if (ret == 0)
 246                 goto timeout;
 247
 248         if ((!i2c->cmd_err) && (msg->flags & I2C_M_RD)) {
 249                 ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len);
 250                 if (ret)
 251                         goto timeout;
 252         }
 253
 254         if (i2c->cmd_err == -ENXIO)
 255                 mxs_i2c_reset(i2c);
 256         else
 257                 writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
 258                                 i2c->regs + MXS_I2C_QUEUECTRL_CLR);
 259
 260         dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err);
 261
 262         return i2c->cmd_err;
 263
 264 timeout:
 265         dev_dbg(i2c->dev, "Timeout!\n");
 266         mxs_i2c_reset(i2c);
 267         return -ETIMEDOUT;
 268 }
 269
 270 static int mxs_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 271                         int num)
 272 {
 273         int i;
 274         int err;
 275
 276         for (i = 0; i < num; i++) {
 277                 err = mxs_i2c_xfer_msg(adap, &msgs[i], i == (num - 1));
 278                 if (err)
 279                         return err;
 280         }
 281
 282         return num;
 283 }
 284
 285 static u32 mxs_i2c_func(struct i2c_adapter *adap)
 286 {
 287         return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
 288 }
 289
 290 static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
 291 {
 292         struct mxs_i2c_dev *i2c = dev_id;
 293         u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
 294         bool is_last_cmd;
 295
 296         if (!stat)
 297                 return IRQ_NONE;
 298
 299         if (stat & MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ)
 300                 i2c->cmd_err = -ENXIO;
 301         else if (stat & (MXS_I2C_CTRL1_EARLY_TERM_IRQ |
 302                     MXS_I2C_CTRL1_MASTER_LOSS_IRQ |
 303                     MXS_I2C_CTRL1_SLAVE_STOP_IRQ | MXS_I2C_CTRL1_SLAVE_IRQ))
 304                 /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */
 305                 i2c->cmd_err = -EIO;
 306
 307         is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
 308                 MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
 309
 310         if (is_last_cmd || i2c->cmd_err)
 311                 complete(&i2c->cmd_complete);
 312
 313         writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
 314
 315         return IRQ_HANDLED;
 316 }
 317
 318 static const struct i2c_algorithm mxs_i2c_algo = {
 319         .master_xfer = mxs_i2c_xfer,
 320         .functionality = mxs_i2c_func,
 321 };
 322
 323 static int __devinit mxs_i2c_probe(struct platform_device *pdev)
 324 {
 325         struct device *dev = &pdev->dev;
 326         struct mxs_i2c_dev *i2c;
 327         struct i2c_adapter *adap;
 328         struct resource *res;
 329         resource_size_t res_size;
 330         int err, irq;
 331
 332         i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL);
 333         if (!i2c)
 334                 return -ENOMEM;
 335
 336         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 337         if (!res)
 338                 return -ENOENT;
 339
 340         res_size = resource_size(res);
 341         if (!devm_request_mem_region(dev, res->start, res_size, res->name))
 342                 return -EBUSY;
 343
 344         i2c->regs = devm_ioremap_nocache(dev, res->start, res_size);
 345         if (!i2c->regs)
 346                 return -EBUSY;
 347
 348         irq = platform_get_irq(pdev, 0);
 349         if (irq < 0)
 350                 return irq;
 351
 352         err = devm_request_irq(dev, irq, mxs_i2c_isr, 0, dev_name(dev), i2c);
 353         if (err)
 354                 return err;
 355
 356         i2c->dev = dev;
 357         platform_set_drvdata(pdev, i2c);
 358
 359         /* Do reset to enforce correct startup after pinmuxing */
 360         mxs_i2c_reset(i2c);
 361
 362         adap = &i2c->adapter;
 363         strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));
 364         adap->owner = THIS_MODULE;
 365         adap->algo = &mxs_i2c_algo;
 366         adap->dev.parent = dev;
 367         adap->nr = pdev->id;
 368         i2c_set_adapdata(adap, i2c);
 369         err = i2c_add_numbered_adapter(adap);
 370         if (err) {
 371                 dev_err(dev, "Failed to add adapter (%d)\n", err);
 372                 writel(MXS_I2C_CTRL0_SFTRST,
 373                                 i2c->regs + MXS_I2C_CTRL0_SET);
 374                 return err;
 375         }
 376
 377         return 0;
 378 }
 379
 380 static int __devexit mxs_i2c_remove(struct platform_device *pdev)
 381 {
 382         struct mxs_i2c_dev *i2c = platform_get_drvdata(pdev);
 383         int ret;
 384
 385         ret = i2c_del_adapter(&i2c->adapter);
 386         if (ret)
 387                 return -EBUSY;
 388
 389         writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET);
 390
 391         platform_set_drvdata(pdev, NULL);
 392
 393         return 0;
 394 }
 395
 396 static struct platform_driver mxs_i2c_driver = {
 397         .driver = {
 398                    .name = DRIVER_NAME,
 399                    .owner = THIS_MODULE,
 400                    },
 401         .remove = __devexit_p(mxs_i2c_remove),
 402 };
 403
 404 static int __init mxs_i2c_init(void)
 405 {
 406         return platform_driver_probe(&mxs_i2c_driver, mxs_i2c_probe);
 407 }
 408 subsys_initcall(mxs_i2c_init);
 409
 410 static void __exit mxs_i2c_exit(void)
 411 {
 412         platform_driver_unregister(&mxs_i2c_driver);
 413 }
 414 module_exit(mxs_i2c_exit);
 415
 416 MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
 417 MODULE_DESCRIPTION("MXS I2C Bus Driver");
 418 MODULE_LICENSE("GPL");
 419 MODULE_ALIAS("platform:" DRIVER_NAME);