drivers/i2c/chips/Kconfig

   1 #
   2 # Miscellaneous I2C chip drivers configuration
   3 #
   4
   5 menu "Miscellaneous I2C Chip support"
   6
   7 config DS1682
   8         tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
   9         depends on EXPERIMENTAL
  10         help
  11           If you say yes here you get support for Dallas Semiconductor
  12           DS1682 Total Elapsed Time Recorder.
  13
  14           This driver can also be built as a module.  If so, the module
  15           will be called ds1682.
  16
  17 config SENSORS_EEPROM
  18         tristate "EEPROM reader"
  19         depends on EXPERIMENTAL
  20         help
  21           If you say yes here you get read-only access to the EEPROM data
  22           available on modern memory DIMMs and Sony Vaio laptops.  Such
  23           EEPROMs could theoretically be available on other devices as well.
  24
  25           This driver can also be built as a module.  If so, the module
  26           will be called eeprom.
  27
  28 config SENSORS_PCF8574
  29         tristate "Philips PCF8574 and PCF8574A"
  30         depends on EXPERIMENTAL
  31         default n
  32         help
  33           If you say yes here you get support for Philips PCF8574 and
  34           PCF8574A chips. These chips are 8-bit I/O expanders for the I2C bus.
  35
  36           This driver can also be built as a module.  If so, the module
  37           will be called pcf8574.
  38
  39           These devices are hard to detect and rarely found on mainstream
  40           hardware.  If unsure, say N.
  41
  42 config PCF8575
  43         tristate "Philips PCF8575"
  44         default n
  45         help
  46           If you say yes here you get support for Philips PCF8575 chip.
  47           This chip is a 16-bit I/O expander for the I2C bus.  Several other
  48           chip manufacturers sell equivalent chips, e.g. Texas Instruments.
  49
  50           This driver can also be built as a module.  If so, the module
  51           will be called pcf8575.
  52
  53           This device is hard to detect and is rarely found on mainstream
  54           hardware.  If unsure, say N.
  55
  56 config SENSORS_PCA9539
  57         tristate "Philips PCA9539 16-bit I/O port (DEPRECATED)"
  58         depends on EXPERIMENTAL && GPIO_PCA9539 = "n"
  59         help
  60           If you say yes here you get support for the Philips PCA9539
  61           16-bit I/O port.
  62
  63           This driver can also be built as a module.  If so, the module
  64           will be called pca9539.
  65
  66           This driver is deprecated and will be dropped soon. Use
  67           drivers/gpio/pca9539.c instead.
  68
  69 config SENSORS_PCF8591
  70         tristate "Philips PCF8591"
  71         depends on EXPERIMENTAL
  72         default n
  73         help
  74           If you say yes here you get support for Philips PCF8591 chips.
  75
  76           This driver can also be built as a module.  If so, the module
  77           will be called pcf8591.
  78
  79           These devices are hard to detect and rarely found on mainstream
  80           hardware.  If unsure, say N.
  81
  82 config ISP1301_OMAP
  83         tristate "Philips ISP1301 with OMAP OTG"
  84         depends on ARCH_OMAP_OTG
  85         help
  86           If you say yes here you get support for the Philips ISP1301
  87           USB-On-The-Go transceiver working with the OMAP OTG controller.
  88           The ISP1301 is used in products including H2 and H3 development
  89           boards for Texas Instruments OMAP processors.
  90
  91           This driver can also be built as a module.  If so, the module
  92           will be called isp1301_omap.
  93
  94 config TPS65010
  95         tristate "TPS6501x Power Management chips"
  96         depends on HAVE_GPIO_LIB
  97         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
  98         help
  99           If you say yes here you get support for the TPS6501x series of
 100           Power Management chips.  These include voltage regulators,
 101           lithium ion/polymer battery charging, and other features that
 102           are often used in portable devices like cell phones and cameras.
 103
 104           This driver can also be built as a module.  If so, the module
 105           will be called tps65010.
 106
 107 config SENSORS_MAX6875
 108         tristate "Maxim MAX6875 Power supply supervisor"
 109         depends on EXPERIMENTAL
 110         help
 111           If you say yes here you get support for the Maxim MAX6875
 112           EEPROM-programmable, quad power-supply sequencer/supervisor.
 113
 114           This provides an interface to program the EEPROM and reset the chip.
 115
 116           This driver also supports the Maxim MAX6874 hex power-supply
 117           sequencer/supervisor if found at a compatible address.
 118
 119           This driver can also be built as a module.  If so, the module
 120           will be called max6875.
 121
 122 config SENSORS_TSL2550
 123         tristate "Taos TSL2550 ambient light sensor"
 124         depends on EXPERIMENTAL
 125         help
 126           If you say yes here you get support for the Taos TSL2550
 127           ambient light sensor.
 128
 129           This driver can also be built as a module.  If so, the module
 130           will be called tsl2550.
 131
 132 config MENELAUS
 133         bool "TWL92330/Menelaus PM chip"
 134         depends on I2C=y && ARCH_OMAP24XX
 135         help
 136           If you say yes here you get support for the Texas Instruments
 137           TWL92330/Menelaus Power Management chip. This include voltage
 138           regulators, Dual slot memory card tranceivers, real-time clock
 139           and other features that are often used in portable devices like
 140           cell phones and PDAs.
 141
 142 endmenu