1 /*======================================================================
3 A driver for PCMCIA IDE/ATA disk cards
5 ide-cs.c 1.3 2002/10/26 05:45:31
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in
23 which case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
32 ======================================================================*/
34 #include <linux/module.h>
35 #include <linux/kernel.h>
36 #include <linux/init.h>
37 #include <linux/ptrace.h>
38 #include <linux/slab.h>
39 #include <linux/string.h>
40 #include <linux/timer.h>
41 #include <linux/ioport.h>
42 #include <linux/ide.h>
43 #include <linux/hdreg.h>
44 #include <linux/major.h>
45 #include <linux/delay.h>
47 #include <asm/system.h>
49 #include <pcmcia/cs_types.h>
50 #include <pcmcia/cs.h>
51 #include <pcmcia/cistpl.h>
52 #include <pcmcia/ds.h>
53 #include <pcmcia/cisreg.h>
54 #include <pcmcia/ciscode.h>
56 /*====================================================================*/
58 /* Module parameters */
60 MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
61 MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
62 MODULE_LICENSE("Dual MPL/GPL");
64 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
67 INT_MODULE_PARM(pc_debug
, PCMCIA_DEBUG
);
68 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
69 static char *version
=
70 "ide-cs.c 1.3 2002/10/26 05:45:31 (David Hinds)";
72 #define DEBUG(n, args...)
75 /*====================================================================*/
77 static const char ide_major
[] = {
78 IDE0_MAJOR
, IDE1_MAJOR
, IDE2_MAJOR
, IDE3_MAJOR
,
79 IDE4_MAJOR
, IDE5_MAJOR
82 typedef struct ide_info_t
{
83 struct pcmcia_device
*p_dev
;
89 static void ide_release(struct pcmcia_device
*);
90 static int ide_config(struct pcmcia_device
*);
92 static void ide_detach(struct pcmcia_device
*p_dev
);
97 /*======================================================================
99 ide_attach() creates an "instance" of the driver, allocating
100 local data structures for one device. The device is registered
103 ======================================================================*/
105 static int ide_probe(struct pcmcia_device
*link
)
109 DEBUG(0, "ide_attach()\n");
111 /* Create new ide device */
112 info
= kzalloc(sizeof(*info
), GFP_KERNEL
);
119 link
->io
.Attributes1
= IO_DATA_PATH_WIDTH_AUTO
;
120 link
->io
.Attributes2
= IO_DATA_PATH_WIDTH_8
;
121 link
->io
.IOAddrLines
= 3;
122 link
->irq
.Attributes
= IRQ_TYPE_DYNAMIC_SHARING
;
123 link
->irq
.IRQInfo1
= IRQ_LEVEL_ID
;
124 link
->conf
.Attributes
= CONF_ENABLE_IRQ
;
125 link
->conf
.IntType
= INT_MEMORY_AND_IO
;
127 return ide_config(link
);
130 /*======================================================================
132 This deletes a driver "instance". The device is de-registered
133 with Card Services. If it has been released, all local data
134 structures are freed. Otherwise, the structures will be freed
135 when the device is released.
137 ======================================================================*/
139 static void ide_detach(struct pcmcia_device
*link
)
141 DEBUG(0, "ide_detach(0x%p)\n", link
);
148 static int idecs_register(unsigned long io
, unsigned long ctl
, unsigned long irq
, struct pcmcia_device
*handle
)
151 memset(&hw
, 0, sizeof(hw
));
152 ide_init_hwif_ports(&hw
, io
, ctl
, NULL
);
154 hw
.chipset
= ide_pci
;
155 hw
.dev
= &handle
->dev
;
156 return ide_register_hw(&hw
, &ide_undecoded_slave
, NULL
);
159 /*======================================================================
161 ide_config() is scheduled to run after a CARD_INSERTION event
162 is received, to configure the PCMCIA socket, and to make the
163 ide device available to the system.
165 ======================================================================*/
167 #define CS_CHECK(fn, ret) \
168 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
170 static int ide_config(struct pcmcia_device
*link
)
172 ide_info_t
*info
= link
->priv
;
178 cistpl_cftable_entry_t dflt
;
180 cistpl_cftable_entry_t
*cfg
;
181 int i
, pass
, last_ret
= 0, last_fn
= 0, hd
, is_kme
= 0;
182 unsigned long io_base
, ctl_base
;
184 DEBUG(0, "ide_config(0x%p)\n", link
);
186 stk
= kzalloc(sizeof(*stk
), GFP_KERNEL
);
187 if (!stk
) goto err_mem
;
188 cfg
= &stk
->parse
.cftable_entry
;
190 tuple
.TupleData
= (cisdata_t
*)&stk
->buf
;
191 tuple
.TupleOffset
= 0;
192 tuple
.TupleDataMax
= 255;
193 tuple
.Attributes
= 0;
195 is_kme
= ((link
->manf_id
== MANFID_KME
) &&
196 ((link
->card_id
== PRODID_KME_KXLC005_A
) ||
197 (link
->card_id
== PRODID_KME_KXLC005_B
)));
199 /* Not sure if this is right... look up the current Vcc */
200 CS_CHECK(GetConfigurationInfo
, pcmcia_get_configuration_info(link
, &stk
->conf
));
202 pass
= io_base
= ctl_base
= 0;
203 tuple
.DesiredTuple
= CISTPL_CFTABLE_ENTRY
;
204 tuple
.Attributes
= 0;
205 CS_CHECK(GetFirstTuple
, pcmcia_get_first_tuple(link
, &tuple
));
207 if (pcmcia_get_tuple_data(link
, &tuple
) != 0) goto next_entry
;
208 if (pcmcia_parse_tuple(link
, &tuple
, &stk
->parse
) != 0) goto next_entry
;
210 /* Check for matching Vcc, unless we're desperate */
212 if (cfg
->vcc
.present
& (1 << CISTPL_POWER_VNOM
)) {
213 if (stk
->conf
.Vcc
!= cfg
->vcc
.param
[CISTPL_POWER_VNOM
] / 10000)
215 } else if (stk
->dflt
.vcc
.present
& (1 << CISTPL_POWER_VNOM
)) {
216 if (stk
->conf
.Vcc
!= stk
->dflt
.vcc
.param
[CISTPL_POWER_VNOM
] / 10000)
221 if (cfg
->vpp1
.present
& (1 << CISTPL_POWER_VNOM
))
223 cfg
->vpp1
.param
[CISTPL_POWER_VNOM
] / 10000;
224 else if (stk
->dflt
.vpp1
.present
& (1 << CISTPL_POWER_VNOM
))
226 stk
->dflt
.vpp1
.param
[CISTPL_POWER_VNOM
] / 10000;
228 if ((cfg
->io
.nwin
> 0) || (stk
->dflt
.io
.nwin
> 0)) {
229 cistpl_io_t
*io
= (cfg
->io
.nwin
) ? &cfg
->io
: &stk
->dflt
.io
;
230 link
->conf
.ConfigIndex
= cfg
->index
;
231 link
->io
.BasePort1
= io
->win
[0].base
;
232 link
->io
.IOAddrLines
= io
->flags
& CISTPL_IO_LINES_MASK
;
233 if (!(io
->flags
& CISTPL_IO_16BIT
))
234 link
->io
.Attributes1
= IO_DATA_PATH_WIDTH_8
;
236 link
->io
.NumPorts1
= 8;
237 link
->io
.BasePort2
= io
->win
[1].base
;
238 link
->io
.NumPorts2
= (is_kme
) ? 2 : 1;
239 if (pcmcia_request_io(link
, &link
->io
) != 0)
241 io_base
= link
->io
.BasePort1
;
242 ctl_base
= link
->io
.BasePort2
;
243 } else if ((io
->nwin
== 1) && (io
->win
[0].len
>= 16)) {
244 link
->io
.NumPorts1
= io
->win
[0].len
;
245 link
->io
.NumPorts2
= 0;
246 if (pcmcia_request_io(link
, &link
->io
) != 0)
248 io_base
= link
->io
.BasePort1
;
249 ctl_base
= link
->io
.BasePort1
+ 0x0e;
250 } else goto next_entry
;
251 /* If we've got this far, we're done */
256 if (cfg
->flags
& CISTPL_CFTABLE_DEFAULT
)
257 memcpy(&stk
->dflt
, cfg
, sizeof(stk
->dflt
));
259 CS_CHECK(GetNextTuple
, pcmcia_get_next_tuple(link
, &tuple
));
260 } else if (pcmcia_get_next_tuple(link
, &tuple
) != 0) {
261 CS_CHECK(GetFirstTuple
, pcmcia_get_first_tuple(link
, &tuple
));
262 memset(&stk
->dflt
, 0, sizeof(stk
->dflt
));
267 CS_CHECK(RequestIRQ
, pcmcia_request_irq(link
, &link
->irq
));
268 CS_CHECK(RequestConfiguration
, pcmcia_request_configuration(link
, &link
->conf
));
270 /* disable drive interrupts during IDE probe */
271 outb(0x02, ctl_base
);
273 /* special setup for KXLC005 card */
275 outb(0x81, ctl_base
+1);
277 /* retry registration in case device is still spinning up */
278 for (hd
= -1, i
= 0; i
< 10; i
++) {
279 hd
= idecs_register(io_base
, ctl_base
, link
->irq
.AssignedIRQ
, link
);
281 if (link
->io
.NumPorts1
== 0x20) {
282 outb(0x02, ctl_base
+ 0x10);
283 hd
= idecs_register(io_base
+ 0x10, ctl_base
+ 0x10,
284 link
->irq
.AssignedIRQ
, link
);
295 printk(KERN_NOTICE
"ide-cs: ide_register() at 0x%3lx & 0x%3lx"
296 ", irq %u failed\n", io_base
, ctl_base
,
297 link
->irq
.AssignedIRQ
);
302 sprintf(info
->node
.dev_name
, "hd%c", 'a' + (hd
* 2));
303 info
->node
.major
= ide_major
[hd
];
304 info
->node
.minor
= 0;
306 link
->dev_node
= &info
->node
;
307 printk(KERN_INFO
"ide-cs: %s: Vpp = %d.%d\n",
308 info
->node
.dev_name
, link
->conf
.Vpp
/ 10, link
->conf
.Vpp
% 10);
314 printk(KERN_NOTICE
"ide-cs: ide_config failed memory allocation\n");
318 cs_error(link
, last_fn
, last_ret
);
325 /*======================================================================
327 After a card is removed, ide_release() will unregister the net
328 device, and release the PCMCIA configuration. If the device is
329 still open, this will be postponed until it is closed.
331 ======================================================================*/
333 void ide_release(struct pcmcia_device
*link
)
335 ide_info_t
*info
= link
->priv
;
337 DEBUG(0, "ide_release(0x%p)\n", link
);
340 /* FIXME: if this fails we need to queue the cleanup somehow
341 -- need to investigate the required PCMCIA magic */
342 ide_unregister(info
->hd
);
346 pcmcia_disable_device(link
);
350 /*======================================================================
352 The card status event handler. Mostly, this schedules other
353 stuff to run after an event is received. A CARD_REMOVAL event
354 also sets some flags to discourage the ide drivers from
355 talking to the ports.
357 ======================================================================*/
359 static struct pcmcia_device_id ide_ids
[] = {
360 PCMCIA_DEVICE_FUNC_ID(4),
361 PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
362 PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
363 PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
364 PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
365 PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
366 PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
367 PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
368 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
369 PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
370 PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
371 PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
372 PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
373 PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
374 PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
375 PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
376 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
377 PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
378 PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
379 PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
380 PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
381 PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
382 PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
383 PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
384 PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
385 PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
386 PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
387 PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
388 PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
389 PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
390 PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
391 PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
392 PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
393 PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
394 PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
395 PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
396 PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
397 PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
398 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
399 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
400 PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
401 PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
402 PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
403 PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
404 PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
405 PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
406 PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
407 PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
408 PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
409 PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
410 PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
411 PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
412 PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
413 PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
416 MODULE_DEVICE_TABLE(pcmcia
, ide_ids
);
418 static struct pcmcia_driver ide_cs_driver
= {
419 .owner
= THIS_MODULE
,
424 .remove
= ide_detach
,
428 static int __init
init_ide_cs(void)
430 return pcmcia_register_driver(&ide_cs_driver
);
433 static void __exit
exit_ide_cs(void)
435 pcmcia_unregister_driver(&ide_cs_driver
);
438 late_initcall(init_ide_cs
);
439 module_exit(exit_ide_cs
);