drivers/iio/accel/Kconfig

   1 #
   2 # Accelerometer drivers
   3 #
   4 # When adding new entries keep the list in alphabetical order
   5
   6 menu "Accelerometers"
   7
   8 config BMA180
   9         tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
  10         depends on I2C
  11         select IIO_BUFFER
  12         select IIO_TRIGGERED_BUFFER
  13         help
  14           Say Y here if you want to build a driver for the Bosch BMA180 or
  15           BMA250 triaxial acceleration sensor.
  16
  17           To compile this driver as a module, choose M here: the
  18           module will be called bma180.
  19
  20 config BMA220
  21     tristate "Bosch BMA220 3-Axis Accelerometer Driver"
  22         depends on SPI
  23         select IIO_BUFFER
  24         select IIO_TRIGGERED_BUFFER
  25     help
  26       Say yes here to add support for the Bosch BMA220 triaxial
  27       acceleration sensor.
  28
  29       To compile this driver as a module, choose M here: the
  30       module will be called bma220_spi.
  31
  32 config BMC150_ACCEL
  33         tristate "Bosch BMC150 Accelerometer Driver"
  34         select IIO_BUFFER
  35         select IIO_TRIGGERED_BUFFER
  36         select REGMAP
  37         select BMC150_ACCEL_I2C if I2C
  38         select BMC150_ACCEL_SPI if SPI
  39         help
  40           Say yes here to build support for the following Bosch accelerometers:
  41           BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
  42
  43           This is a combo module with both accelerometer and magnetometer.
  44           This driver is only implementing accelerometer part, which has
  45           its own address and register map.
  46
  47 config BMC150_ACCEL_I2C
  48         tristate
  49         select REGMAP_I2C
  50
  51 config BMC150_ACCEL_SPI
  52         tristate
  53         select REGMAP_SPI
  54
  55 config HID_SENSOR_ACCEL_3D
  56         depends on HID_SENSOR_HUB
  57         select IIO_BUFFER
  58         select IIO_TRIGGERED_BUFFER
  59         select HID_SENSOR_IIO_COMMON
  60         select HID_SENSOR_IIO_TRIGGER
  61         tristate "HID Accelerometers 3D"
  62         help
  63           Say yes here to build support for the HID SENSOR
  64           accelerometers 3D.
  65
  66           To compile this driver as a module, choose M here: the
  67           module will be called hid-sensor-accel-3d.
  68
  69 config IIO_ST_ACCEL_3AXIS
  70         tristate "STMicroelectronics accelerometers 3-Axis Driver"
  71         depends on (I2C || SPI_MASTER) && SYSFS
  72         select IIO_ST_SENSORS_CORE
  73         select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
  74         select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
  75         select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
  76         help
  77           Say yes here to build support for STMicroelectronics accelerometers:
  78           LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
  79           LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL.
  80
  81           This driver can also be built as a module. If so, these modules
  82           will be created:
  83           - st_accel (core functions for the driver [it is mandatory]);
  84           - st_accel_i2c (necessary for the I2C devices [optional*]);
  85           - st_accel_spi (necessary for the SPI devices [optional*]);
  86
  87           (*) one of these is necessary to do something.
  88
  89 config IIO_ST_ACCEL_I2C_3AXIS
  90         tristate
  91         depends on IIO_ST_ACCEL_3AXIS
  92         depends on IIO_ST_SENSORS_I2C
  93
  94 config IIO_ST_ACCEL_SPI_3AXIS
  95         tristate
  96         depends on IIO_ST_ACCEL_3AXIS
  97         depends on IIO_ST_SENSORS_SPI
  98
  99 config KXSD9
 100         tristate "Kionix KXSD9 Accelerometer Driver"
 101         depends on SPI
 102         help
 103           Say yes here to build support for the Kionix KXSD9 accelerometer.
 104           Currently this only supports the device via an SPI interface.
 105
 106           To compile this driver as a module, choose M here: the module
 107           will be called kxsd9.
 108
 109 config KXCJK1013
 110         tristate "Kionix 3-Axis Accelerometer Driver"
 111         depends on I2C
 112         select IIO_BUFFER
 113         select IIO_TRIGGERED_BUFFER
 114         help
 115           Say Y here if you want to build a driver for the Kionix KXCJK-1013
 116           triaxial acceleration sensor. This driver also supports KXCJ9-1008
 117           and KXTJ2-1009.
 118
 119           To compile this driver as a module, choose M here: the module will
 120           be called kxcjk-1013.
 121
 122 config MMA7455
 123         tristate
 124         select IIO_BUFFER
 125         select IIO_TRIGGERED_BUFFER
 126
 127 config MMA7455_I2C
 128         tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
 129         depends on I2C
 130         select MMA7455
 131         select REGMAP_I2C
 132         help
 133           Say yes here to build support for the Freescale MMA7455L and
 134           MMA7456L 3-axis accelerometer.
 135
 136           To compile this driver as a module, choose M here: the module
 137           will be called mma7455_i2c.
 138
 139 config MMA7455_SPI
 140         tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
 141         depends on SPI_MASTER
 142         select MMA7455
 143         select REGMAP_SPI
 144         help
 145           Say yes here to build support for the Freescale MMA7455L and
 146           MMA7456L 3-axis accelerometer.
 147
 148           To compile this driver as a module, choose M here: the module
 149           will be called mma7455_spi.
 150
 151 config MMA7660
 152         tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver"
 153         depends on I2C
 154         help
 155           Say yes here to get support for the Freescale MMA7660FC 3-Axis
 156           accelerometer.
 157
 158           Choosing M will build the driver as a module. If so, the module
 159           will be called mma7660.
 160
 161 config MMA8452
 162         tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver"
 163         depends on I2C
 164         select IIO_BUFFER
 165         select IIO_TRIGGERED_BUFFER
 166         help
 167           Say yes here to build support for the following Freescale / NXP 3-axis
 168           accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC,
 169           FXLS8471Q.
 170
 171           To compile this driver as a module, choose M here: the module
 172           will be called mma8452.
 173
 174 config MMA9551_CORE
 175         tristate
 176
 177 config MMA9551
 178         tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
 179         depends on I2C
 180         select MMA9551_CORE
 181
 182         help
 183           Say yes here to build support for the Freescale MMA9551L
 184           Intelligent Motion-Sensing Platform Driver.
 185
 186           To compile this driver as a module, choose M here: the module
 187           will be called mma9551.
 188
 189 config MMA9553
 190         tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
 191         depends on I2C
 192         select MMA9551_CORE
 193         help
 194           Say yes here to build support for the Freescale MMA9553L
 195           Intelligent Pedometer Platform Driver.
 196
 197           To compile this driver as a module, choose M here: the module
 198           will be called mma9553.
 199
 200 config MXC4005
 201         tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
 202         depends on I2C
 203         select IIO_BUFFER
 204         select IIO_TRIGGERED_BUFFER
 205         select REGMAP_I2C
 206         help
 207           Say yes here to build support for the Memsic MXC4005XC 3-axis
 208           accelerometer.
 209
 210           To compile this driver as a module, choose M. The module will be
 211           called mxc4005.
 212
 213 config MXC6255
 214         tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
 215         depends on I2C
 216         select REGMAP_I2C
 217         help
 218           Say yes here to build support for the Memsic MXC6255 Orientation
 219           Sensing Accelerometer Driver.
 220
 221           To compile this driver as a module, choose M here: the module will be
 222           called mxc6255.
 223
 224 config STK8312
 225         tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
 226         depends on I2C
 227         select IIO_BUFFER
 228         select IIO_TRIGGERED_BUFFER
 229         help
 230           Say yes here to get support for the Sensortek STK8312 3-axis
 231           accelerometer.
 232
 233           Choosing M will build the driver as a module. If so, the module
 234           will be called stk8312.
 235
 236 config STK8BA50
 237         tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
 238         depends on I2C
 239         select IIO_BUFFER
 240         select IIO_TRIGGERED_BUFFER
 241         help
 242           Say yes here to get support for the Sensortek STK8BA50 3-axis
 243           accelerometer.
 244
 245           Choosing M will build the driver as a module. If so, the module
 246           will be called stk8ba50.
 247
 248 endmenu