drivers/iio/adc/Kconfig

   1 #
   2 # ADC drivers
   3 #
   4 # When adding new entries keep the list in alphabetical order
   5
   6 menu "Analog to digital converters"
   7
   8 config AD_SIGMA_DELTA
   9         tristate
  10         select IIO_BUFFER
  11         select IIO_TRIGGERED_BUFFER
  12
  13 config AD7266
  14         tristate "Analog Devices AD7265/AD7266 ADC driver"
  15         depends on SPI_MASTER
  16         select IIO_BUFFER
  17         select IIO_TRIGGER
  18         select IIO_TRIGGERED_BUFFER
  19         help
  20           Say yes here to build support for Analog Devices AD7265 and AD7266
  21           ADCs.
  22
  23           To compile this driver as a module, choose M here: the module will be
  24           called ad7266.
  25
  26 config AD7291
  27         tristate "Analog Devices AD7291 ADC driver"
  28         depends on I2C
  29         help
  30           Say yes here to build support for Analog Devices AD7291
  31           8 Channel ADC with temperature sensor.
  32
  33           To compile this driver as a module, choose M here: the
  34           module will be called ad7291.
  35
  36 config AD7298
  37         tristate "Analog Devices AD7298 ADC driver"
  38         depends on SPI
  39         select IIO_BUFFER
  40         select IIO_TRIGGERED_BUFFER
  41         help
  42           Say yes here to build support for Analog Devices AD7298
  43           8 Channel ADC with temperature sensor.
  44
  45           To compile this driver as a module, choose M here: the
  46           module will be called ad7298.
  47
  48 config AD7476
  49         tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
  50         depends on SPI
  51         select IIO_BUFFER
  52         select IIO_TRIGGERED_BUFFER
  53         help
  54           Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
  55           AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
  56           AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).
  57
  58           To compile this driver as a module, choose M here: the
  59           module will be called ad7476.
  60
  61 config AD7766
  62         tristate "Analog Devices AD7766/AD7767 ADC driver"
  63         depends on SPI_MASTER
  64         select IIO_BUFFER
  65         select IIO_TRIGGERED_BUFFER
  66         help
  67           Say yes here to build support for Analog Devices AD7766, AD7766-1,
  68           AD7766-2, AD7767, AD7767-1, AD7767-2 SPI analog to digital converters.
  69
  70           To compile this driver as a module, choose M here: the module will be
  71           called ad7766.
  72
  73 config AD7791
  74         tristate "Analog Devices AD7791 ADC driver"
  75         depends on SPI
  76         select AD_SIGMA_DELTA
  77         help
  78           Say yes here to build support for Analog Devices AD7787, AD7788, AD7789,
  79           AD7790 and AD7791 SPI analog to digital converters (ADC).
  80
  81           To compile this driver as a module, choose M here: the module will be
  82           called ad7791.
  83
  84 config AD7793
  85         tristate "Analog Devices AD7793 and similar ADCs driver"
  86         depends on SPI
  87         select AD_SIGMA_DELTA
  88         help
  89           Say yes here to build support for Analog Devices AD7785, AD7792, AD7793,
  90           AD7794 and AD7795 SPI analog to digital converters (ADC).
  91
  92           To compile this driver as a module, choose M here: the
  93           module will be called AD7793.
  94
  95 config AD7887
  96         tristate "Analog Devices AD7887 ADC driver"
  97         depends on SPI
  98         select IIO_BUFFER
  99         select IIO_TRIGGERED_BUFFER
 100         help
 101           Say yes here to build support for Analog Devices
 102           AD7887 SPI analog to digital converter (ADC).
 103
 104           To compile this driver as a module, choose M here: the
 105           module will be called ad7887.
 106
 107 config AD7923
 108         tristate "Analog Devices AD7923 and similar ADCs driver"
 109         depends on SPI
 110         select IIO_BUFFER
 111         select IIO_TRIGGERED_BUFFER
 112         help
 113           Say yes here to build support for Analog Devices
 114           AD7904, AD7914, AD7923, AD7924 4 Channel ADCs.
 115
 116           To compile this driver as a module, choose M here: the
 117           module will be called ad7923.
 118
 119 config AD799X
 120         tristate "Analog Devices AD799x ADC driver"
 121         depends on I2C
 122         select IIO_BUFFER
 123         select IIO_TRIGGERED_BUFFER
 124         help
 125           Say yes here to build support for Analog Devices:
 126           ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
 127           i2c analog to digital converters (ADC). Provides direct access
 128           via sysfs.
 129
 130           To compile this driver as a module, choose M here: the module will be
 131           called ad799x.
 132
 133 config AT91_ADC
 134         tristate "Atmel AT91 ADC"
 135         depends on ARCH_AT91
 136         depends on INPUT
 137         select IIO_BUFFER
 138         select IIO_TRIGGERED_BUFFER
 139         select SYSFS
 140         help
 141           Say yes here to build support for Atmel AT91 ADC.
 142
 143           To compile this driver as a module, choose M here: the module will be
 144           called at91_adc.
 145
 146 config AT91_SAMA5D2_ADC
 147         tristate "Atmel AT91 SAMA5D2 ADC"
 148         depends on ARCH_AT91 || COMPILE_TEST
 149         depends on HAS_IOMEM
 150         help
 151           Say yes here to build support for Atmel SAMA5D2 ADC which is
 152           available on SAMA5D2 SoC family.
 153
 154           To compile this driver as a module, choose M here: the module will be
 155           called at91-sama5d2_adc.
 156
 157 config AXP288_ADC
 158         tristate "X-Powers AXP288 ADC driver"
 159         depends on MFD_AXP20X
 160         help
 161           Say yes here to have support for X-Powers power management IC (PMIC) ADC
 162           device. Depending on platform configuration, this general purpose ADC can
 163           be used for sampling sensors such as thermal resistors.
 164
 165           To compile this driver as a module, choose M here: the module will be
 166           called axp288_adc.
 167
 168 config BCM_IPROC_ADC
 169         tristate "Broadcom IPROC ADC driver"
 170         depends on ARCH_BCM_IPROC || COMPILE_TEST
 171         depends on MFD_SYSCON
 172         default ARCH_BCM_CYGNUS
 173         help
 174           Say Y here if you want to add support for the Broadcom static
 175           ADC driver.
 176
 177           Broadcom iProc ADC driver. Broadcom iProc ADC controller has 8
 178           channels. The driver allows the user to read voltage values.
 179
 180 config BERLIN2_ADC
 181         tristate "Marvell Berlin2 ADC driver"
 182         depends on ARCH_BERLIN
 183         help
 184           Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for
 185           temperature measurement.
 186
 187 config CC10001_ADC
 188         tristate "Cosmic Circuits 10001 ADC driver"
 189         depends on HAS_IOMEM && HAVE_CLK && REGULATOR
 190         select IIO_BUFFER
 191         select IIO_TRIGGERED_BUFFER
 192         help
 193           Say yes here to build support for Cosmic Circuits 10001 ADC.
 194
 195           This driver can also be built as a module. If so, the module will be
 196           called cc10001_adc.
 197
 198 config DA9150_GPADC
 199         tristate "Dialog DA9150 GPADC driver support"
 200         depends on MFD_DA9150
 201         help
 202           Say yes here to build support for Dialog DA9150 GPADC.
 203
 204           This driver can also be built as a module. If chosen, the module name
 205           will be da9150-gpadc.
 206
 207           To compile this driver as a module, choose M here: the module will be
 208           called berlin2-adc.
 209
 210 config ENVELOPE_DETECTOR
 211         tristate "Envelope detector using a DAC and a comparator"
 212         depends on OF
 213         help
 214           Say yes here to build support for an envelope detector using a DAC
 215           and a comparator.
 216
 217           To compile this driver as a module, choose M here: the module will be
 218           called envelope-detector.
 219
 220 config EXYNOS_ADC
 221         tristate "Exynos ADC driver support"
 222         depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
 223         depends on HAS_IOMEM
 224         help
 225           Core support for the ADC block found in the Samsung EXYNOS series
 226           of SoCs for drivers such as the touchscreen and hwmon to use to share
 227           this resource.
 228
 229           To compile this driver as a module, choose M here: the module will be
 230           called exynos_adc.
 231
 232 config FSL_MX25_ADC
 233         tristate "Freescale MX25 ADC driver"
 234         depends on MFD_MX25_TSADC
 235         help
 236           Generic Conversion Queue driver used for general purpose ADC in the
 237           MX25. This driver supports single measurements using the MX25 ADC.
 238
 239 config HI8435
 240         tristate "Holt Integrated Circuits HI-8435 threshold detector"
 241         select IIO_TRIGGERED_EVENT
 242         depends on SPI
 243         help
 244           If you say yes here you get support for Holt Integrated Circuits
 245           HI-8435 chip.
 246
 247           This driver can also be built as a module. If so, the module will be
 248           called hi8435.
 249
 250 config HX711
 251         tristate "AVIA HX711 ADC for weight cells"
 252         depends on GPIOLIB
 253         help
 254           If you say yes here you get support for AVIA HX711 ADC which is used
 255           for weigh cells
 256
 257           This driver uses two GPIOs, one acts as the clock and controls the
 258           channel selection and gain, the other one is used for the measurement
 259           data
 260
 261           Currently the raw value is read from the chip and delivered.
 262           To get an actual weight one needs to subtract the
 263           zero offset and multiply by a scale factor.
 264           This should be done in userspace.
 265
 266           This driver can also be built as a module. If so, the module will be
 267           called hx711.
 268
 269 config INA2XX_ADC
 270         tristate "Texas Instruments INA2xx Power Monitors IIO driver"
 271         depends on I2C && !SENSORS_INA2XX
 272         select REGMAP_I2C
 273         select IIO_BUFFER
 274         select IIO_KFIFO_BUF
 275         help
 276           Say yes here to build support for TI INA2xx family of Power Monitors.
 277           This driver is mutually exclusive with the HWMON version.
 278
 279 config IMX7D_ADC
 280         tristate "IMX7D ADC driver"
 281         depends on ARCH_MXC || COMPILE_TEST
 282         depends on HAS_IOMEM
 283         help
 284           Say yes here to build support for IMX7D ADC.
 285
 286           This driver can also be built as a module. If so, the module will be
 287           called imx7d_adc.
 288
 289 config LP8788_ADC
 290         tristate "LP8788 ADC driver"
 291         depends on MFD_LP8788
 292         help
 293           Say yes here to build support for TI LP8788 ADC.
 294
 295           To compile this driver as a module, choose M here: the module will be
 296           called lp8788_adc.
 297
 298 config LPC18XX_ADC
 299         tristate "NXP LPC18xx ADC driver"
 300         depends on ARCH_LPC18XX || COMPILE_TEST
 301         depends on OF && HAS_IOMEM
 302         help
 303           Say yes here to build support for NXP LPC18XX ADC.
 304
 305           To compile this driver as a module, choose M here: the module will be
 306           called lpc18xx_adc.
 307
 308 config LTC2485
 309         tristate "Linear Technology LTC2485 ADC driver"
 310         depends on I2C
 311         help
 312           Say yes here to build support for Linear Technology LTC2485 ADC.
 313
 314           To compile this driver as a module, choose M here: the module will be
 315           called ltc2485.
 316
 317 config MAX1027
 318         tristate "Maxim max1027 ADC driver"
 319         depends on SPI
 320         select IIO_BUFFER
 321         select IIO_TRIGGERED_BUFFER
 322         help
 323           Say yes here to build support for Maxim SPI ADC models
 324           max1027, max1029 and max1031.
 325
 326           To compile this driver as a module, choose M here: the module will be
 327           called max1027.
 328
 329 config MAX1363
 330         tristate "Maxim max1363 ADC driver"
 331         depends on I2C
 332         select IIO_BUFFER
 333         select IIO_TRIGGERED_BUFFER
 334         help
 335           Say yes here to build support for many Maxim i2c analog to digital
 336           converters (ADC). (max1361, max1362, max1363, max1364, max1036,
 337           max1037, max1038, max1039, max1136, max1136, max1137, max1138,
 338           max1139, max1236, max1237, max11238, max1239, max11600, max11601,
 339           max11602, max11603, max11604, max11605, max11606, max11607,
 340           max11608, max11609, max11610, max11611, max11612, max11613,
 341           max11614, max11615, max11616, max11617, max11644, max11645,
 342           max11646, max11647) Provides direct access via sysfs and buffered
 343           data via the iio dev interface.
 344
 345           To compile this driver as a module, choose M here: the module will be
 346           called max1363.
 347
 348 config MCP320X
 349         tristate "Microchip Technology MCP3x01/02/04/08"
 350         depends on SPI
 351         help
 352           Say yes here to build support for Microchip Technology's
 353           MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204,
 354           MCP3208 or MCP3301 analog to digital converter.
 355
 356           This driver can also be built as a module. If so, the module will be
 357           called mcp320x.
 358
 359 config MCP3422
 360         tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver"
 361         depends on I2C
 362         help
 363           Say yes here to build support for Microchip Technology's MCP3421
 364           MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428
 365           analog to digital converters.
 366
 367           This driver can also be built as a module. If so, the module will be
 368           called mcp3422.
 369
 370 config MEDIATEK_MT6577_AUXADC
 371         tristate "MediaTek AUXADC driver"
 372         depends on ARCH_MEDIATEK || COMPILE_TEST
 373         depends on HAS_IOMEM
 374         help
 375           Say yes here to enable support for MediaTek mt65xx AUXADC.
 376
 377           The driver supports immediate mode operation to read from one of sixteen
 378           channels (external or internal).
 379
 380           This driver can also be built as a module. If so, the module will be
 381           called mt6577_auxadc.
 382
 383 config MEN_Z188_ADC
 384         tristate "MEN 16z188 ADC IP Core support"
 385         depends on MCB
 386         help
 387           Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB
 388           carrier.
 389
 390           This driver can also be built as a module. If so, the module will be
 391           called men_z188_adc.
 392
 393 config MXS_LRADC
 394         tristate "Freescale i.MX23/i.MX28 LRADC"
 395         depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM
 396         depends on INPUT
 397         select STMP_DEVICE
 398         select IIO_BUFFER
 399         select IIO_TRIGGERED_BUFFER
 400         help
 401           Say yes here to build support for i.MX23/i.MX28 LRADC convertor
 402           built into these chips.
 403
 404           To compile this driver as a module, choose M here: the
 405           module will be called mxs-lradc.
 406
 407 config NAU7802
 408         tristate "Nuvoton NAU7802 ADC driver"
 409         depends on I2C
 410         help
 411           Say yes here to build support for Nuvoton NAU7802 ADC.
 412
 413           To compile this driver as a module, choose M here: the
 414           module will be called nau7802.
 415
 416 config PALMAS_GPADC
 417         tristate "TI Palmas General Purpose ADC"
 418         depends on MFD_PALMAS
 419         help
 420           Palmas series pmic chip by Texas Instruments (twl6035/6037)
 421           is used in smartphones and tablets and supports a 16 channel
 422           general purpose ADC.
 423
 424 config QCOM_SPMI_IADC
 425         tristate "Qualcomm SPMI PMIC current ADC"
 426         depends on SPMI
 427         select REGMAP_SPMI
 428         help
 429           This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip.
 430
 431           The driver supports single mode operation to read from one of two
 432           channels (external or internal). Hardware have additional
 433           channels internally used for gain and offset calibration.
 434
 435           To compile this driver as a module, choose M here: the module will
 436           be called qcom-spmi-iadc.
 437
 438 config QCOM_SPMI_VADC
 439         tristate "Qualcomm SPMI PMIC voltage ADC"
 440         depends on SPMI
 441         select REGMAP_SPMI
 442         help
 443           This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip.
 444
 445           The driver supports multiple channels read. The VADC is a 15-bit
 446           sigma-delta ADC. Some of the channels are internally used for
 447           calibration.
 448
 449           To compile this driver as a module, choose M here: the module will
 450           be called qcom-spmi-vadc.
 451
 452 config ROCKCHIP_SARADC
 453         tristate "Rockchip SARADC driver"
 454         depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
 455         depends on RESET_CONTROLLER
 456         help
 457           Say yes here to build support for the SARADC found in SoCs from
 458           Rockchip.
 459
 460           To compile this driver as a module, choose M here: the
 461           module will be called rockchip_saradc.
 462
 463 config STM32_ADC_CORE
 464         tristate "STMicroelectronics STM32 adc core"
 465         depends on ARCH_STM32 || COMPILE_TEST
 466         depends on OF
 467         depends on REGULATOR
 468         help
 469           Select this option to enable the core driver for STMicroelectronics
 470           STM32 analog-to-digital converter (ADC).
 471
 472           This driver can also be built as a module.  If so, the module
 473           will be called stm32-adc-core.
 474
 475 config STM32_ADC
 476         tristate "STMicroelectronics STM32 adc"
 477         depends on STM32_ADC_CORE
 478         help
 479           Say yes here to build support for STMicroelectronics stm32 Analog
 480           to Digital Converter (ADC).
 481
 482           This driver can also be built as a module.  If so, the module
 483           will be called stm32-adc.
 484
 485 config STX104
 486         tristate "Apex Embedded Systems STX104 driver"
 487         depends on X86 && ISA_BUS_API
 488         select GPIOLIB
 489         help
 490           Say yes here to build support for the Apex Embedded Systems STX104
 491           integrated analog PC/104 card.
 492
 493           This driver supports the 16 channels of single-ended (8 channels of
 494           differential) analog inputs, 2 channels of analog output, 4 digital
 495           inputs, and 4 digital outputs provided by the STX104.
 496
 497           The base port addresses for the devices may be configured via the base
 498           array module parameter.
 499
 500 config TI_ADC081C
 501         tristate "Texas Instruments ADC081C/ADC101C/ADC121C family"
 502         depends on I2C
 503         select IIO_BUFFER
 504         select IIO_TRIGGERED_BUFFER
 505         help
 506           If you say yes here you get support for Texas Instruments ADC081C,
 507           ADC101C and ADC121C ADC chips.
 508
 509           This driver can also be built as a module. If so, the module will be
 510           called ti-adc081c.
 511
 512 config TI_ADC0832
 513         tristate "Texas Instruments ADC0831/ADC0832/ADC0834/ADC0838"
 514         depends on SPI
 515         select IIO_BUFFER
 516         select IIO_TRIGGERED_BUFFER
 517         help
 518           If you say yes here you get support for Texas Instruments ADC0831,
 519           ADC0832, ADC0834, ADC0838 ADC chips.
 520
 521           This driver can also be built as a module. If so, the module will be
 522           called ti-adc0832.
 523
 524 config TI_ADC12138
 525         tristate "Texas Instruments ADC12130/ADC12132/ADC12138"
 526         depends on SPI
 527         select IIO_BUFFER
 528         select IIO_TRIGGERED_BUFFER
 529         help
 530           If you say yes here you get support for Texas Instruments ADC12130,
 531           ADC12132 and ADC12138 chips.
 532
 533           This driver can also be built as a module. If so, the module will be
 534           called ti-adc12138.
 535
 536 config TI_ADC128S052
 537         tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021"
 538         depends on SPI
 539         help
 540           If you say yes here you get support for Texas Instruments ADC128S052,
 541           ADC122S021 and ADC124S021 chips.
 542
 543           This driver can also be built as a module. If so, the module will be
 544           called ti-adc128s052.
 545
 546 config TI_ADC161S626
 547         tristate "Texas Instruments ADC161S626 1-channel differential ADC"
 548         depends on SPI
 549         select IIO_BUFFER
 550         select IIO_TRIGGERED_BUFFER
 551         help
 552           If you say yes here you get support for Texas Instruments ADC141S626,
 553           and ADC161S626 chips.
 554
 555           This driver can also be built as a module. If so, the module will be
 556           called ti-adc161s626.
 557
 558 config TI_ADS1015
 559         tristate "Texas Instruments ADS1015 ADC"
 560         depends on I2C && !SENSORS_ADS1015
 561         select REGMAP_I2C
 562         select IIO_BUFFER
 563         select IIO_TRIGGERED_BUFFER
 564         help
 565           If you say yes here you get support for Texas Instruments ADS1015
 566           ADC chip.
 567
 568           This driver can also be built as a module. If so, the module will be
 569           called ti-ads1015.
 570
 571 config TI_ADS7950
 572         tristate "Texas Instruments ADS7950 ADC driver"
 573         depends on SPI
 574         select IIO_BUFFER
 575         select IIO_TRIGGERED_BUFFER
 576         help
 577           Say yes here to build support for Texas Instruments ADS7950, ADS7951,
 578           ADS7952, ADS7953, ADS7954, ADS7955, ADS7956, ADS7957, ADS7958, ADS7959.
 579           ADS7960, ADS7961.
 580
 581           To compile this driver as a module, choose M here: the
 582           module will be called ti-ads7950.
 583
 584 config TI_ADS8688
 585         tristate "Texas Instruments ADS8688"
 586         depends on SPI && OF
 587         help
 588           If you say yes here you get support for Texas Instruments ADS8684 and
 589           and ADS8688 ADC chips
 590
 591           This driver can also be built as a module. If so, the module will be
 592           called ti-ads8688.
 593
 594 config TI_AM335X_ADC
 595         tristate "TI's AM335X ADC driver"
 596         depends on MFD_TI_AM335X_TSCADC && HAS_DMA
 597         select IIO_BUFFER
 598         select IIO_KFIFO_BUF
 599         help
 600           Say yes here to build support for Texas Instruments ADC
 601           driver which is also a MFD client.
 602
 603           To compile this driver as a module, choose M here: the module will be
 604           called ti_am335x_adc.
 605
 606 config TWL4030_MADC
 607         tristate "TWL4030 MADC (Monitoring A/D Converter)"
 608         depends on TWL4030_CORE
 609         help
 610           This driver provides support for Triton TWL4030-MADC. The
 611           driver supports both RT and SW conversion methods.
 612
 613           This driver can also be built as a module. If so, the module will be
 614           called twl4030-madc.
 615
 616 config TWL6030_GPADC
 617         tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
 618         depends on TWL4030_CORE
 619         default n
 620         help
 621           Say yes here if you want support for the TWL6030/TWL6032 General
 622           Purpose A/D Converter. This will add support for battery type
 623           detection, battery voltage and temperature measurement, die
 624           temperature measurement, system supply voltage, audio accessory,
 625           USB ID detection.
 626
 627           This driver can also be built as a module. If so, the module will be
 628           called twl6030-gpadc.
 629
 630 config VF610_ADC
 631         tristate "Freescale vf610 ADC driver"
 632         depends on OF
 633         depends on HAS_IOMEM
 634         select IIO_BUFFER
 635         select IIO_TRIGGERED_BUFFER
 636         help
 637           Say yes here to support for Vybrid board analog-to-digital converter.
 638           Since the IP is used for i.MX6SLX, the driver also support i.MX6SLX.
 639
 640           This driver can also be built as a module. If so, the module will be
 641           called vf610_adc.
 642
 643 config VIPERBOARD_ADC
 644         tristate "Viperboard ADC support"
 645         depends on MFD_VIPERBOARD && USB
 646         help
 647           Say yes here to access the ADC part of the Nano River
 648           Technologies Viperboard.
 649
 650           To compile this driver as a module, choose M here: the module will be
 651           called viperboard_adc.
 652
 653 config XILINX_XADC
 654         tristate "Xilinx XADC driver"
 655         depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
 656         depends on HAS_IOMEM
 657         select IIO_BUFFER
 658         select IIO_TRIGGERED_BUFFER
 659         help
 660           Say yes here to have support for the Xilinx XADC. The driver does support
 661           both the ZYNQ interface to the XADC as well as the AXI-XADC interface.
 662
 663           The driver can also be build as a module. If so, the module will be called
 664           xilinx-xadc.
 665
 666 endmenu