]> git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/blob - drivers/iio/chemical/bme680.h
Merge tag 'perf-core-for-mingo-5.2-20190517' of git://git.kernel.org/pub/scm/linux...
[mirror_ubuntu-hirsute-kernel.git] / drivers / iio / chemical / bme680.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef BME680_H_
3 #define BME680_H_
4
5 #define BME680_REG_CHIP_ID 0xD0
6 #define BME680_CHIP_ID_VAL 0x61
7 #define BME680_REG_SOFT_RESET 0xE0
8 #define BME680_CMD_SOFTRESET 0xB6
9 #define BME680_REG_STATUS 0x73
10 #define BME680_SPI_MEM_PAGE_BIT BIT(4)
11 #define BME680_SPI_MEM_PAGE_1_VAL 1
12
13 #define BME680_REG_TEMP_MSB 0x22
14 #define BME680_REG_PRESS_MSB 0x1F
15 #define BM6880_REG_HUMIDITY_MSB 0x25
16 #define BME680_REG_GAS_MSB 0x2A
17 #define BME680_REG_GAS_R_LSB 0x2B
18 #define BME680_GAS_STAB_BIT BIT(4)
19 #define BME680_GAS_RANGE_MASK GENMASK(3, 0)
20
21 #define BME680_REG_CTRL_HUMIDITY 0x72
22 #define BME680_OSRS_HUMIDITY_MASK GENMASK(2, 0)
23
24 #define BME680_REG_CTRL_MEAS 0x74
25 #define BME680_OSRS_TEMP_MASK GENMASK(7, 5)
26 #define BME680_OSRS_PRESS_MASK GENMASK(4, 2)
27 #define BME680_MODE_MASK GENMASK(1, 0)
28 #define BME680_MODE_FORCED 1
29 #define BME680_MODE_SLEEP 0
30
31 #define BME680_REG_CONFIG 0x75
32 #define BME680_FILTER_MASK GENMASK(4, 2)
33 #define BME680_FILTER_COEFF_VAL BIT(1)
34
35 /* TEMP/PRESS/HUMID reading skipped */
36 #define BME680_MEAS_SKIPPED 0x8000
37
38 #define BME680_MAX_OVERFLOW_VAL 0x40000000
39 #define BME680_HUM_REG_SHIFT_VAL 4
40 #define BME680_BIT_H1_DATA_MASK GENMASK(3, 0)
41
42 #define BME680_REG_RES_HEAT_RANGE 0x02
43 #define BME680_RHRANGE_MASK GENMASK(5, 4)
44 #define BME680_REG_RES_HEAT_VAL 0x00
45 #define BME680_REG_RANGE_SW_ERR 0x04
46 #define BME680_RSERROR_MASK GENMASK(7, 4)
47 #define BME680_REG_RES_HEAT_0 0x5A
48 #define BME680_REG_GAS_WAIT_0 0x64
49 #define BME680_ADC_GAS_RES_SHIFT 6
50 #define BME680_AMB_TEMP 25
51
52 #define BME680_REG_CTRL_GAS_1 0x71
53 #define BME680_RUN_GAS_MASK BIT(4)
54 #define BME680_NB_CONV_MASK GENMASK(3, 0)
55
56 #define BME680_REG_MEAS_STAT_0 0x1D
57 #define BME680_GAS_MEAS_BIT BIT(6)
58
59 /* Calibration Parameters */
60 #define BME680_T2_LSB_REG 0x8A
61 #define BME680_T3_REG 0x8C
62 #define BME680_P1_LSB_REG 0x8E
63 #define BME680_P2_LSB_REG 0x90
64 #define BME680_P3_REG 0x92
65 #define BME680_P4_LSB_REG 0x94
66 #define BME680_P5_LSB_REG 0x96
67 #define BME680_P7_REG 0x98
68 #define BME680_P6_REG 0x99
69 #define BME680_P8_LSB_REG 0x9C
70 #define BME680_P9_LSB_REG 0x9E
71 #define BME680_P10_REG 0xA0
72 #define BME680_H2_LSB_REG 0xE2
73 #define BME680_H2_MSB_REG 0xE1
74 #define BME680_H1_MSB_REG 0xE3
75 #define BME680_H1_LSB_REG 0xE2
76 #define BME680_H3_REG 0xE4
77 #define BME680_H4_REG 0xE5
78 #define BME680_H5_REG 0xE6
79 #define BME680_H6_REG 0xE7
80 #define BME680_H7_REG 0xE8
81 #define BME680_T1_LSB_REG 0xE9
82 #define BME680_GH2_LSB_REG 0xEB
83 #define BME680_GH1_REG 0xED
84 #define BME680_GH3_REG 0xEE
85
86 extern const struct regmap_config bme680_regmap_config;
87
88 int bme680_core_probe(struct device *dev, struct regmap *regmap,
89 const char *name);
90
91 #endif /* BME680_H_ */