drivers/iio/magnetometer/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 #
   3 # Magnetometer sensors
   4 #
   5 # When adding new entries keep the list in alphabetical order
   6
   7 menu "Magnetometer sensors"
   8
   9 config AK8974
  10         tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
  11         depends on I2C
  12         depends on OF
  13         select REGMAP_I2C
  14         select IIO_BUFFER
  15         select IIO_TRIGGERED_BUFFER
  16         help
  17           Say yes here to build support for Asahi Kasei AK8974, AMI305 or
  18           AMI306 I2C-based 3-axis magnetometer chips.
  19
  20           To compile this driver as a module, choose M here: the module
  21           will be called ak8974.
  22
  23 config AK8975
  24         tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
  25         depends on I2C
  26         depends on GPIOLIB || COMPILE_TEST
  27         select IIO_BUFFER
  28         select IIO_TRIGGERED_BUFFER
  29         help
  30           Say yes here to build support for Asahi Kasei AK8975, AK8963,
  31           AK09911 or AK09912 3-Axis Magnetometer.
  32
  33           To compile this driver as a module, choose M here: the module
  34           will be called ak8975.
  35
  36 config AK09911
  37         tristate "Asahi Kasei AK09911 3-axis Compass"
  38         depends on I2C
  39         depends on GPIOLIB || COMPILE_TEST
  40         select AK8975
  41         help
  42           Deprecated: AK09911 is now supported by AK8975 driver.
  43
  44 config BMC150_MAGN
  45         tristate
  46         select IIO_BUFFER
  47         select IIO_TRIGGERED_BUFFER
  48
  49 config BMC150_MAGN_I2C
  50         tristate "Bosch BMC150 I2C Magnetometer Driver"
  51         depends on I2C
  52         select BMC150_MAGN
  53         select REGMAP_I2C
  54         help
  55           Say yes here to build support for the BMC150 magnetometer with
  56           I2C interface.
  57
  58           This is a combo module with both accelerometer and magnetometer.
  59           This driver is only implementing magnetometer part, which has
  60           its own address and register map.
  61
  62           This driver also supports I2C Bosch BMC156 and BMM150 chips.
  63           To compile this driver as a module, choose M here: the module will be
  64           called bmc150_magn_i2c.
  65
  66 config BMC150_MAGN_SPI
  67         tristate "Bosch BMC150 SPI Magnetometer Driver"
  68         depends on SPI
  69         select BMC150_MAGN
  70         select REGMAP_SPI
  71         help
  72           Say yes here to build support for the BMC150 magnetometer with
  73           SPI interface.
  74
  75           This is a combo module with both accelerometer and magnetometer.
  76           This driver is only implementing magnetometer part, which has
  77           its own address and register map.
  78
  79           This driver also supports SPI Bosch BMC156 and BMM150 chips.
  80           To compile this driver as a module, choose M here: the module will be
  81           called bmc150_magn_spi.
  82
  83 config MAG3110
  84         tristate "Freescale MAG3110 3-Axis Magnetometer"
  85         depends on I2C
  86         select IIO_BUFFER
  87         select IIO_TRIGGERED_BUFFER
  88         help
  89           Say yes here to build support for the Freescale MAG3110 3-Axis
  90           magnetometer.
  91
  92           To compile this driver as a module, choose M here: the module
  93           will be called mag3110.
  94
  95 config HID_SENSOR_MAGNETOMETER_3D
  96         depends on HID_SENSOR_HUB
  97         select IIO_BUFFER
  98         select IIO_TRIGGERED_BUFFER
  99         select HID_SENSOR_IIO_COMMON
 100         select HID_SENSOR_IIO_TRIGGER
 101         tristate "HID Magenetometer 3D"
 102         help
 103           Say yes here to build support for the HID SENSOR
 104           Magnetometer 3D.
 105
 106 config MMC35240
 107         tristate "MEMSIC MMC35240 3-axis magnetic sensor"
 108         select REGMAP_I2C
 109         depends on I2C
 110         help
 111           Say yes here to build support for the MEMSIC MMC35240 3-axis
 112           magnetic sensor.
 113
 114           To compile this driver as a module, choose M here: the module
 115           will be called mmc35240.
 116
 117 config IIO_ST_MAGN_3AXIS
 118         tristate "STMicroelectronics magnetometers 3-Axis Driver"
 119         depends on (I2C || SPI_MASTER) && SYSFS
 120         select IIO_ST_SENSORS_CORE
 121         select IIO_ST_MAGN_I2C_3AXIS if (I2C)
 122         select IIO_ST_MAGN_SPI_3AXIS if (SPI_MASTER)
 123         select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
 124         help
 125           Say yes here to build support for STMicroelectronics magnetometers:
 126           LSM303DLHC, LSM303DLM, LIS3MDL.
 127
 128           This driver can also be built as a module. If so, these modules
 129           will be created:
 130           - st_magn (core functions for the driver [it is mandatory]);
 131           - st_magn_i2c (necessary for the I2C devices [optional*]);
 132           - st_magn_spi (necessary for the SPI devices [optional*]);
 133
 134           (*) one of these is necessary to do something.
 135
 136 config IIO_ST_MAGN_I2C_3AXIS
 137         tristate
 138         depends on IIO_ST_MAGN_3AXIS
 139         depends on IIO_ST_SENSORS_I2C
 140
 141 config IIO_ST_MAGN_SPI_3AXIS
 142         tristate
 143         depends on IIO_ST_MAGN_3AXIS
 144         depends on IIO_ST_SENSORS_SPI
 145
 146 config SENSORS_HMC5843
 147         tristate
 148         select IIO_BUFFER
 149         select IIO_TRIGGERED_BUFFER
 150
 151 config SENSORS_HMC5843_I2C
 152         tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)"
 153         depends on I2C
 154         select SENSORS_HMC5843
 155         select REGMAP_I2C
 156         help
 157           Say Y here to add support for the Honeywell HMC5843, HMC5883 and
 158           HMC5883L 3-Axis Magnetometer (digital compass).
 159
 160           This driver can also be compiled as a set of modules.
 161           If so, these modules will be created:
 162           - hmc5843_core (core functions)
 163           - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)
 164
 165 config SENSORS_HMC5843_SPI
 166         tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)"
 167         depends on SPI_MASTER
 168         select SENSORS_HMC5843
 169         select REGMAP_SPI
 170         help
 171           Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer
 172           (digital compass).
 173
 174           This driver can also be compiled as a set of modules.
 175           If so, these modules will be created:
 176           - hmc5843_core (core functions)
 177           - hmc5843_spi (support for HMC5983)
 178
 179 config SENSORS_RM3100
 180         tristate
 181         select IIO_BUFFER
 182         select IIO_TRIGGERED_BUFFER
 183
 184 config SENSORS_RM3100_I2C
 185         tristate "PNI RM3100 3-Axis Magnetometer (I2C)"
 186         depends on I2C
 187         select SENSORS_RM3100
 188         select REGMAP_I2C
 189         help
 190           Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
 191
 192           This driver can also be compiled as a module.
 193           To compile this driver as a module, choose M here: the module
 194           will be called rm3100-i2c.
 195
 196 config SENSORS_RM3100_SPI
 197         tristate "PNI RM3100 3-Axis Magnetometer (SPI)"
 198         depends on SPI_MASTER
 199         select SENSORS_RM3100
 200         select REGMAP_SPI
 201         help
 202           Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
 203
 204           This driver can also be compiled as a module.
 205           To compile this driver as a module, choose M here: the module
 206           will be called rm3100-spi.
 207
 208 endmenu