drivers/iio/pressure/Kconfig

   1 #
   2 # Pressure drivers
   3 #
   4 # When adding new entries keep the list in alphabetical order
   5
   6 menu "Pressure sensors"
   7
   8 config ABP060MG
   9         tristate "Honeywell ABP pressure sensor driver"
  10         depends on I2C
  11         help
  12           Say yes here to build support for the Honeywell ABP pressure
  13           sensors.
  14
  15           To compile this driver as a module, choose M here: the module
  16           will be called abp060mg.
  17
  18 config BMP280
  19         tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver"
  20         depends on (I2C || SPI_MASTER)
  21         select REGMAP
  22         select BMP280_I2C if (I2C)
  23         select BMP280_SPI if (SPI_MASTER)
  24         help
  25           Say yes here to build support for Bosch Sensortec BMP180 and BMP280
  26           pressure and temperature sensors. Also supports the BE280 with
  27           an additional humidity sensor channel.
  28
  29           To compile this driver as a module, choose M here: the core module
  30           will be called bmp280 and you will also get bmp280-i2c for I2C
  31           and/or bmp280-spi for SPI support.
  32
  33 config BMP280_I2C
  34         tristate
  35         depends on BMP280
  36         depends on I2C
  37         select REGMAP_I2C
  38
  39 config BMP280_SPI
  40         tristate
  41         depends on BMP280
  42         depends on SPI_MASTER
  43         select REGMAP
  44
  45 config HID_SENSOR_PRESS
  46         depends on HID_SENSOR_HUB
  47         select IIO_BUFFER
  48         select IIO_TRIGGERED_BUFFER
  49         select HID_SENSOR_IIO_COMMON
  50         select HID_SENSOR_IIO_TRIGGER
  51         tristate "HID PRESS"
  52         help
  53           Say yes here to build support for the HID SENSOR
  54           Pressure driver
  55
  56           To compile this driver as a module, choose M here: the module
  57           will be called hid-sensor-press.
  58
  59 config HP03
  60         tristate "Hope RF HP03 temperature and pressure sensor driver"
  61         depends on I2C
  62         select REGMAP_I2C
  63         help
  64           Say yes here to build support for Hope RF HP03 pressure and
  65           temperature sensor.
  66
  67           To compile this driver as a module, choose M here: the module
  68           will be called hp03.
  69
  70 config MPL115
  71         tristate
  72
  73 config MPL115_I2C
  74         tristate "Freescale MPL115A2 pressure sensor driver"
  75         depends on I2C
  76         select MPL115
  77         help
  78           Say yes here to build support for the Freescale MPL115A2
  79           pressure sensor connected via I2C.
  80
  81           To compile this driver as a module, choose M here: the module
  82           will be called mpl115_i2c.
  83
  84 config MPL115_SPI
  85         tristate "Freescale MPL115A1 pressure sensor driver"
  86         depends on SPI_MASTER
  87         select MPL115
  88         help
  89           Say yes here to build support for the Freescale MPL115A1
  90           pressure sensor connected via SPI.
  91
  92           To compile this driver as a module, choose M here: the module
  93           will be called mpl115_spi.
  94
  95 config MPL3115
  96         tristate "Freescale MPL3115A2 pressure sensor driver"
  97         depends on I2C
  98         select IIO_BUFFER
  99         select IIO_TRIGGERED_BUFFER
 100         help
 101           Say yes here to build support for the Freescale MPL3115A2
 102           pressure sensor / altimeter.
 103
 104           To compile this driver as a module, choose M here: the module
 105           will be called mpl3115.
 106
 107 config MS5611
 108         tristate "Measurement Specialties MS5611 pressure sensor driver"
 109         select IIO_BUFFER
 110         select IIO_TRIGGERED_BUFFER
 111         help
 112           Say Y here to build support for the Measurement Specialties
 113           MS5611, MS5607 pressure and temperature sensors.
 114
 115           To compile this driver as a module, choose M here: the module will
 116           be called ms5611_core.
 117
 118 config MS5611_I2C
 119         tristate "support I2C bus connection"
 120         depends on I2C && MS5611
 121         help
 122           Say Y here to build I2C bus support for MS5611.
 123
 124           To compile this driver as a module, choose M here: the module will
 125           be called ms5611_i2c.
 126
 127 config MS5611_SPI
 128         tristate "support SPI bus connection"
 129         depends on SPI_MASTER && MS5611
 130         help
 131           Say Y here to build SPI bus support for MS5611.
 132
 133           To compile this driver as a module, choose M here: the module will
 134           be called ms5611_spi.
 135
 136 config MS5637
 137         tristate "Measurement Specialties MS5637 pressure & temperature sensor"
 138         depends on I2C
 139         select IIO_MS_SENSORS_I2C
 140         help
 141           If you say yes here you get support for the Measurement Specialties
 142           MS5637 pressure and temperature sensor.
 143           This driver is also used for MS8607 temperature, pressure & humidity
 144           sensor
 145
 146           This driver can also be built as a module. If so, the module will
 147           be called ms5637.
 148
 149 config IIO_ST_PRESS
 150         tristate "STMicroelectronics pressure sensor Driver"
 151         depends on (I2C || SPI_MASTER) && SYSFS
 152         select IIO_ST_SENSORS_CORE
 153         select IIO_ST_PRESS_I2C if (I2C)
 154         select IIO_ST_PRESS_SPI if (SPI_MASTER)
 155         select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
 156         help
 157           Say yes here to build support for STMicroelectronics pressure
 158           sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB.
 159
 160           This driver can also be built as a module. If so, these modules
 161           will be created:
 162           - st_pressure (core functions for the driver [it is mandatory]);
 163           - st_pressure_i2c (necessary for the I2C devices [optional*]);
 164           - st_pressure_spi (necessary for the SPI devices [optional*]);
 165
 166           (*) one of these is necessary to do something.
 167
 168 config IIO_ST_PRESS_I2C
 169         tristate
 170         depends on IIO_ST_PRESS
 171         depends on IIO_ST_SENSORS_I2C
 172
 173 config IIO_ST_PRESS_SPI
 174         tristate
 175         depends on IIO_ST_PRESS
 176         depends on IIO_ST_SENSORS_SPI
 177
 178 config T5403
 179         tristate "EPCOS T5403 digital barometric pressure sensor driver"
 180         depends on I2C
 181         help
 182           Say yes here to build support for the EPCOS T5403 pressure sensor
 183           connected via I2C.
 184
 185           To compile this driver as a module, choose M here: the module
 186           will be called t5403.
 187
 188 config HP206C
 189         tristate "HOPERF HP206C precision barometer and altimeter sensor"
 190         depends on I2C
 191         help
 192           Say yes here to build support for the HOPREF HP206C precision
 193           barometer and altimeter sensor.
 194
 195           This driver can also be built as a module. If so, the module will
 196           be called hp206c.
 197
 198 config ZPA2326
 199         tristate "Murata ZPA2326 pressure sensor driver"
 200         select IIO_BUFFER
 201         select IIO_TRIGGERED_BUFFER
 202         select REGMAP
 203         select ZPA2326_I2C if I2C
 204         select ZPA2326_SPI if SPI_MASTER
 205         help
 206           Say Y here to build support for the Murata ZPA2326 pressure and
 207           temperature sensor.
 208
 209           To compile this driver as a module, choose M here: the module will
 210           be called zpa2326.
 211
 212 config ZPA2326_I2C
 213         tristate
 214         select REGMAP_I2C
 215
 216 config ZPA2326_SPI
 217         tristate
 218         select REGMAP_SPI
 219
 220 endmenu