drivers/iio/pressure/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 #
   3 # Pressure drivers
   4 #
   5 # When adding new entries keep the list in alphabetical order
   6
   7 menu "Pressure sensors"
   8
   9 config ABP060MG
  10         tristate "Honeywell ABP pressure sensor driver"
  11         depends on I2C
  12         help
  13           Say yes here to build support for the Honeywell ABP pressure
  14           sensors.
  15
  16           To compile this driver as a module, choose M here: the module
  17           will be called abp060mg.
  18
  19 config BMP280
  20         tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver"
  21         depends on (I2C || SPI_MASTER)
  22         select REGMAP
  23         select BMP280_I2C if (I2C)
  24         select BMP280_SPI if (SPI_MASTER)
  25         help
  26           Say yes here to build support for Bosch Sensortec BMP180 and BMP280
  27           pressure and temperature sensors. Also supports the BME280 with
  28           an additional humidity sensor channel.
  29
  30           To compile this driver as a module, choose M here: the core module
  31           will be called bmp280 and you will also get bmp280-i2c for I2C
  32           and/or bmp280-spi for SPI support.
  33
  34 config BMP280_I2C
  35         tristate
  36         depends on BMP280
  37         depends on I2C
  38         select REGMAP_I2C
  39
  40 config BMP280_SPI
  41         tristate
  42         depends on BMP280
  43         depends on SPI_MASTER
  44         select REGMAP
  45
  46 config IIO_CROS_EC_BARO
  47         tristate "ChromeOS EC Barometer Sensor"
  48         depends on IIO_CROS_EC_SENSORS_CORE
  49         help
  50           Say yes here to build support for the Barometer sensor when
  51           presented by the ChromeOS EC Sensor hub.
  52
  53           To compile this driver as a module, choose M here: the module
  54           will be called cros_ec_baro.
  55
  56 config DLHL60D
  57         tristate "All Sensors DLHL60D and DLHL60G low voltage digital pressure sensors"
  58         depends on I2C
  59         select IIO_BUFFER
  60         select IIO_TRIGGERED_BUFFER
  61         help
  62           Say yes here to build support for the All Sensors DLH series
  63           pressure sensors driver.
  64
  65           To compile this driver as a module, choose M here: the module
  66           will be called dlhl60d.
  67
  68 config DPS310
  69         tristate "Infineon DPS310 pressure and temperature sensor"
  70         depends on I2C
  71         select REGMAP_I2C
  72         help
  73           Support for the Infineon DPS310 digital barometric pressure sensor.
  74           It can be accessed over I2C bus.
  75
  76           This driver can also be built as a module.  If so, the module will be
  77           called dps310.
  78
  79 config HID_SENSOR_PRESS
  80         depends on HID_SENSOR_HUB
  81         select IIO_BUFFER
  82         select IIO_TRIGGERED_BUFFER
  83         select HID_SENSOR_IIO_COMMON
  84         select HID_SENSOR_IIO_TRIGGER
  85         tristate "HID PRESS"
  86         help
  87           Say yes here to build support for the HID SENSOR
  88           Pressure driver
  89
  90           To compile this driver as a module, choose M here: the module
  91           will be called hid-sensor-press.
  92
  93 config HP03
  94         tristate "Hope RF HP03 temperature and pressure sensor driver"
  95         depends on I2C
  96         select REGMAP_I2C
  97         help
  98           Say yes here to build support for Hope RF HP03 pressure and
  99           temperature sensor.
 100
 101           To compile this driver as a module, choose M here: the module
 102           will be called hp03.
 103
 104 config ICP10100
 105         tristate "InvenSense ICP-101xx pressure and temperature sensor"
 106         depends on I2C
 107         select CRC8
 108         help
 109           Say yes here to build support for InvenSense ICP-101xx barometric
 110           pressure and temperature sensor.
 111
 112           To compile this driver as a module, choose M here: the module
 113           will be called icp10100.
 114
 115 config MPL115
 116         tristate
 117
 118 config MPL115_I2C
 119         tristate "Freescale MPL115A2 pressure sensor driver"
 120         depends on I2C
 121         select MPL115
 122         help
 123           Say yes here to build support for the Freescale MPL115A2
 124           pressure sensor connected via I2C.
 125
 126           To compile this driver as a module, choose M here: the module
 127           will be called mpl115_i2c.
 128
 129 config MPL115_SPI
 130         tristate "Freescale MPL115A1 pressure sensor driver"
 131         depends on SPI_MASTER
 132         select MPL115
 133         help
 134           Say yes here to build support for the Freescale MPL115A1
 135           pressure sensor connected via SPI.
 136
 137           To compile this driver as a module, choose M here: the module
 138           will be called mpl115_spi.
 139
 140 config MPL3115
 141         tristate "Freescale MPL3115A2 pressure sensor driver"
 142         depends on I2C
 143         select IIO_BUFFER
 144         select IIO_TRIGGERED_BUFFER
 145         help
 146           Say yes here to build support for the Freescale MPL3115A2
 147           pressure sensor / altimeter.
 148
 149           To compile this driver as a module, choose M here: the module
 150           will be called mpl3115.
 151
 152 config MS5611
 153         tristate "Measurement Specialties MS5611 pressure sensor driver"
 154         select IIO_BUFFER
 155         select IIO_TRIGGERED_BUFFER
 156         help
 157           Say Y here to build support for the Measurement Specialties
 158           MS5611, MS5607 pressure and temperature sensors.
 159
 160           To compile this driver as a module, choose M here: the module will
 161           be called ms5611_core.
 162
 163 config MS5611_I2C
 164         tristate "support I2C bus connection"
 165         depends on I2C && MS5611
 166         help
 167           Say Y here to build I2C bus support for MS5611.
 168
 169           To compile this driver as a module, choose M here: the module will
 170           be called ms5611_i2c.
 171
 172 config MS5611_SPI
 173         tristate "support SPI bus connection"
 174         depends on SPI_MASTER && MS5611
 175         help
 176           Say Y here to build SPI bus support for MS5611.
 177
 178           To compile this driver as a module, choose M here: the module will
 179           be called ms5611_spi.
 180
 181 config MS5637
 182         tristate "Measurement Specialties MS5637 pressure & temperature sensor"
 183         depends on I2C
 184         select IIO_MS_SENSORS_I2C
 185         help
 186           If you say yes here you get support for the Measurement Specialties
 187           MS5637 pressure and temperature sensor.
 188           This driver is also used for MS8607 temperature, pressure & humidity
 189           sensor
 190
 191           This driver can also be built as a module. If so, the module will
 192           be called ms5637.
 193
 194 config IIO_ST_PRESS
 195         tristate "STMicroelectronics pressure sensor Driver"
 196         depends on (I2C || SPI_MASTER) && SYSFS
 197         select IIO_ST_SENSORS_CORE
 198         select IIO_ST_PRESS_I2C if (I2C)
 199         select IIO_ST_PRESS_SPI if (SPI_MASTER)
 200         select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
 201         help
 202           Say yes here to build support for STMicroelectronics pressure
 203           sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH.
 204
 205           This driver can also be built as a module. If so, these modules
 206           will be created:
 207           - st_pressure (core functions for the driver [it is mandatory]);
 208           - st_pressure_i2c (necessary for the I2C devices [optional*]);
 209           - st_pressure_spi (necessary for the SPI devices [optional*]);
 210
 211           (*) one of these is necessary to do something.
 212
 213 config IIO_ST_PRESS_I2C
 214         tristate
 215         depends on IIO_ST_PRESS
 216         depends on IIO_ST_SENSORS_I2C
 217
 218 config IIO_ST_PRESS_SPI
 219         tristate
 220         depends on IIO_ST_PRESS
 221         depends on IIO_ST_SENSORS_SPI
 222
 223 config T5403
 224         tristate "EPCOS T5403 digital barometric pressure sensor driver"
 225         depends on I2C
 226         help
 227           Say yes here to build support for the EPCOS T5403 pressure sensor
 228           connected via I2C.
 229
 230           To compile this driver as a module, choose M here: the module
 231           will be called t5403.
 232
 233 config HP206C
 234         tristate "HOPERF HP206C precision barometer and altimeter sensor"
 235         depends on I2C
 236         help
 237           Say yes here to build support for the HOPREF HP206C precision
 238           barometer and altimeter sensor.
 239
 240           This driver can also be built as a module. If so, the module will
 241           be called hp206c.
 242
 243 config ZPA2326
 244         tristate "Murata ZPA2326 pressure sensor driver"
 245         select IIO_BUFFER
 246         select IIO_TRIGGERED_BUFFER
 247         select REGMAP
 248         select ZPA2326_I2C if I2C
 249         select ZPA2326_SPI if SPI_MASTER
 250         help
 251           Say Y here to build support for the Murata ZPA2326 pressure and
 252           temperature sensor.
 253
 254           To compile this driver as a module, choose M here: the module will
 255           be called zpa2326.
 256
 257 config ZPA2326_I2C
 258         tristate
 259         select REGMAP_I2C
 260
 261 config ZPA2326_SPI
 262         tristate
 263         select REGMAP_SPI
 264
 265 endmenu