4 * Copyright(c) 2015-2017 Intel Corporation.
6 * This file is provided under a dual BSD/GPLv2 license. When using or
7 * redistributing this file, you may do so under either license.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of version 2 of the GNU General Public License as
13 * published by the Free Software Foundation.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18 * General Public License for more details.
22 * Redistribution and use in source and binary forms, with or without
23 * modification, are permitted provided that the following conditions
26 * - Redistributions of source code must retain the above copyright
27 * notice, this list of conditions and the following disclaimer.
28 * - Redistributions in binary form must reproduce the above copyright
29 * notice, this list of conditions and the following disclaimer in
30 * the documentation and/or other materials provided with the
32 * - Neither the name of Intel Corporation nor the names of its
33 * contributors may be used to endorse or promote products derived
34 * from this software without specific prior written permission.
36 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
37 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
38 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
39 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
40 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
41 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
42 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
43 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
45 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
46 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
50 #include <linux/interrupt.h>
51 #include <linux/pci.h>
52 #include <linux/dma-mapping.h>
53 #include <linux/mutex.h>
54 #include <linux/list.h>
55 #include <linux/scatterlist.h>
56 #include <linux/slab.h>
57 #include <linux/idr.h>
60 #include <linux/completion.h>
61 #include <linux/kref.h>
62 #include <linux/sched.h>
63 #include <linux/cdev.h>
64 #include <linux/delay.h>
65 #include <linux/kthread.h>
66 #include <linux/i2c.h>
67 #include <linux/i2c-algo-bit.h>
68 #include <rdma/ib_hdrs.h>
69 #include <linux/rhashtable.h>
70 #include <linux/netdevice.h>
71 #include <rdma/rdma_vt.h>
73 #include "chip_registers.h"
83 /* bumped 1 from s/w major version of TrueScale */
84 #define HFI1_CHIP_VERS_MAJ 3U
86 /* don't care about this except printing */
87 #define HFI1_CHIP_VERS_MIN 0U
89 /* The Organization Unique Identifier (Mfg code), and its position in GUID */
90 #define HFI1_OUI 0x001175
91 #define HFI1_OUI_LSB 40
93 #define DROP_PACKET_OFF 0
94 #define DROP_PACKET_ON 1
96 extern unsigned long hfi1_cap_mask
;
97 #define HFI1_CAP_KGET_MASK(mask, cap) ((mask) & HFI1_CAP_##cap)
98 #define HFI1_CAP_UGET_MASK(mask, cap) \
99 (((mask) >> HFI1_CAP_USER_SHIFT) & HFI1_CAP_##cap)
100 #define HFI1_CAP_KGET(cap) (HFI1_CAP_KGET_MASK(hfi1_cap_mask, cap))
101 #define HFI1_CAP_UGET(cap) (HFI1_CAP_UGET_MASK(hfi1_cap_mask, cap))
102 #define HFI1_CAP_IS_KSET(cap) (!!HFI1_CAP_KGET(cap))
103 #define HFI1_CAP_IS_USET(cap) (!!HFI1_CAP_UGET(cap))
104 #define HFI1_MISC_GET() ((hfi1_cap_mask >> HFI1_CAP_MISC_SHIFT) & \
106 /* Offline Disabled Reason is 4-bits */
107 #define HFI1_ODR_MASK(rsn) ((rsn) & OPA_PI_MASK_OFFLINE_REASON)
110 * Control context is always 0 and handles the error packets.
111 * It also handles the VL15 and multicast packets.
113 #define HFI1_CTRL_CTXT 0
116 * Driver context will store software counters for each of the events
117 * associated with these status registers
119 #define NUM_CCE_ERR_STATUS_COUNTERS 41
120 #define NUM_RCV_ERR_STATUS_COUNTERS 64
121 #define NUM_MISC_ERR_STATUS_COUNTERS 13
122 #define NUM_SEND_PIO_ERR_STATUS_COUNTERS 36
123 #define NUM_SEND_DMA_ERR_STATUS_COUNTERS 4
124 #define NUM_SEND_EGRESS_ERR_STATUS_COUNTERS 64
125 #define NUM_SEND_ERR_STATUS_COUNTERS 3
126 #define NUM_SEND_CTXT_ERR_STATUS_COUNTERS 5
127 #define NUM_SEND_DMA_ENG_ERR_STATUS_COUNTERS 24
130 * per driver stats, either not device nor port-specific, or
131 * summed over all of the devices and ports.
132 * They are described by name via ipathfs filesystem, so layout
133 * and number of elements can change without breaking compatibility.
134 * If members are added or deleted hfi1_statnames[] in debugfs.c must
137 struct hfi1_ib_stats
{
138 __u64 sps_ints
; /* number of interrupts handled */
139 __u64 sps_errints
; /* number of error interrupts */
140 __u64 sps_txerrs
; /* tx-related packet errors */
141 __u64 sps_rcverrs
; /* non-crc rcv packet errors */
142 __u64 sps_hwerrs
; /* hardware errors reported (parity, etc.) */
143 __u64 sps_nopiobufs
; /* no pio bufs avail from kernel */
144 __u64 sps_ctxts
; /* number of contexts currently open */
145 __u64 sps_lenerrs
; /* number of kernel packets where RHF != LRH len */
150 extern struct hfi1_ib_stats hfi1_stats
;
151 extern const struct pci_error_handlers hfi1_pci_err_handler
;
154 * First-cut criterion for "device is active" is
155 * two thousand dwords combined Tx, Rx traffic per
156 * 5-second interval. SMA packets are 64 dwords,
157 * and occur "a few per second", presumably each way.
159 #define HFI1_TRAFFIC_ACTIVE_THRESHOLD (2000)
162 * Below contains all data related to a single context (formerly called port).
165 #ifdef CONFIG_DEBUG_FS
166 struct hfi1_opcode_stats_perctx
;
169 struct ctxt_eager_bufs
{
170 ssize_t size
; /* total size of eager buffers */
171 u32 count
; /* size of buffers array */
172 u32 numbufs
; /* number of buffers allocated */
173 u32 alloced
; /* number of rcvarray entries used */
174 u32 rcvtid_size
; /* size of each eager rcv tid */
175 u32 threshold
; /* head update threshold */
176 struct eager_buffer
{
188 struct list_head list
;
192 struct hfi1_ctxtdata
{
193 /* shadow the ctxt's RcvCtrl register */
195 /* rcvhdrq base, needs mmap before useful */
197 /* kernel virtual address where hdrqtail is updated */
198 volatile __le64
*rcvhdrtail_kvaddr
;
199 /* when waiting for rcv or pioavail */
200 wait_queue_head_t wait
;
201 /* rcvhdrq size (for freeing) */
203 /* number of rcvhdrq entries */
205 /* size of each of the rcvhdrq entries */
207 /* mmap of hdrq, must fit in 44 bits */
208 dma_addr_t rcvhdrq_dma
;
209 dma_addr_t rcvhdrqtailaddr_dma
;
210 struct ctxt_eager_bufs egrbufs
;
211 /* this receive context's assigned PIO ACK send context */
212 struct send_context
*sc
;
214 /* dynamic receive available interrupt timeout */
215 u32 rcvavail_timeout
;
217 * number of opens (including slave sub-contexts) on this instance
218 * (ignoring forks, dup, etc. for now)
221 /* Device context index */
224 * non-zero if ctxt can be shared, and defines the maximum number of
225 * sub-contexts for this device context.
228 /* non-zero if ctxt is being shared. */
233 /* number of RcvArray groups for this context. */
234 u32 rcv_array_groups
;
235 /* index of first eager TID entry. */
237 /* number of expected TID entries */
239 /* index of first expected TID entry. */
242 struct exp_tid_set tid_group_list
;
243 struct exp_tid_set tid_used_list
;
244 struct exp_tid_set tid_full_list
;
246 /* lock protecting all Expected TID data */
247 struct mutex exp_lock
;
248 /* number of pio bufs for this ctxt (all procs, if shared) */
250 /* first pio buffer for this ctxt */
252 /* chip offset of PIO buffers for this ctxt */
254 /* per-context configuration flags */
256 /* per-context event flags for fileops/intr communication */
257 unsigned long event_flags
;
258 /* WAIT_RCV that timed out, no interrupt */
260 /* WAIT_PIO that timed out, no interrupt */
262 /* WAIT_RCV already happened, no wait */
264 /* WAIT_PIO already happened, no wait */
266 /* total number of polled urgent packets */
268 /* saved total number of polled urgent packets for poll edge trigger */
270 /* same size as task_struct .comm[], command that opened context */
271 char comm
[TASK_COMM_LEN
];
272 /* so file ops can get at unit */
273 struct hfi1_devdata
*dd
;
274 /* so functions that need physical port can get it easily */
275 struct hfi1_pportdata
*ppd
;
276 /* associated msix interrupt */
278 /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
279 void *subctxt_uregbase
;
280 /* An array of pages for the eager receive buffers * N */
281 void *subctxt_rcvegrbuf
;
282 /* An array of pages for the eager header queue entries * N */
283 void *subctxt_rcvhdr_base
;
284 /* Bitmask of in use context(s) */
285 DECLARE_BITMAP(in_use_ctxts
, HFI1_MAX_SHARED_CTXTS
);
286 /* The version of the library which opened this ctxt */
288 /* Type of packets or conditions we want to poll for */
290 /* receive packet sequence counter */
293 /* ctxt rcvhdrq head offset */
296 /* QPs waiting for context processing */
297 struct list_head qp_wait_list
;
298 /* interrupt handling */
299 u64 imask
; /* clear interrupt mask */
300 int ireg
; /* clear interrupt register */
301 unsigned numa_id
; /* numa node of this context */
302 /* verbs stats per CTX */
303 struct hfi1_opcode_stats_perctx
*opstats
;
305 * This is the kernel thread that will keep making
306 * progress on the user sdma requests behind the scenes.
307 * There is one per context (shared contexts use the master's).
309 struct task_struct
*progress
;
310 struct list_head sdma_queues
;
311 /* protect sdma queues */
312 spinlock_t sdma_qlock
;
314 /* Is ASPM interrupt supported for this context */
315 bool aspm_intr_supported
;
316 /* ASPM state (enabled/disabled) for this context */
318 /* Timer for re-enabling ASPM if interrupt activity quietens down */
319 struct timer_list aspm_timer
;
320 /* Lock to serialize between intr, timer intr and user threads */
321 spinlock_t aspm_lock
;
322 /* Is ASPM processing enabled for this context (in intr context) */
323 bool aspm_intr_enable
;
324 /* Last interrupt timestamp */
325 ktime_t aspm_ts_last_intr
;
326 /* Last timestamp at which we scheduled a timer for this context */
327 ktime_t aspm_ts_timer_sched
;
330 * The interrupt handler for a particular receive context can vary
331 * throughout it's lifetime. This is not a lock protected data member so
332 * it must be updated atomically and the prev and new value must always
333 * be valid. Worst case is we process an extra interrupt and up to 64
334 * packets with the wrong interrupt handler.
336 int (*do_interrupt
)(struct hfi1_ctxtdata
*rcd
, int threaded
);
338 /* Indicates that this is vnic context */
341 /* vnic queue index this context is mapped to */
346 * Represents a single packet at a high level. Put commonly computed things in
347 * here so we do not have to keep doing them over and over. The rule of thumb is
348 * if something is used one time to derive some value, store that something in
349 * here. If it is used multiple times, then store the result of that derivation
355 struct hfi1_ctxtdata
*rcd
;
358 struct ib_other_headers
*ohdr
;
372 struct rvt_sge_state
;
375 * Get/Set IB link-level config parameters for f_get/set_ib_cfg()
376 * Mostly for MADs that set or query link parameters, also ipath
379 #define HFI1_IB_CFG_LIDLMC 0 /* LID (LS16b) and Mask (MS16b) */
380 #define HFI1_IB_CFG_LWID_DG_ENB 1 /* allowed Link-width downgrade */
381 #define HFI1_IB_CFG_LWID_ENB 2 /* allowed Link-width */
382 #define HFI1_IB_CFG_LWID 3 /* currently active Link-width */
383 #define HFI1_IB_CFG_SPD_ENB 4 /* allowed Link speeds */
384 #define HFI1_IB_CFG_SPD 5 /* current Link spd */
385 #define HFI1_IB_CFG_RXPOL_ENB 6 /* Auto-RX-polarity enable */
386 #define HFI1_IB_CFG_LREV_ENB 7 /* Auto-Lane-reversal enable */
387 #define HFI1_IB_CFG_LINKLATENCY 8 /* Link Latency (IB1.2 only) */
388 #define HFI1_IB_CFG_HRTBT 9 /* IB heartbeat off/enable/auto; DDR/QDR only */
389 #define HFI1_IB_CFG_OP_VLS 10 /* operational VLs */
390 #define HFI1_IB_CFG_VL_HIGH_CAP 11 /* num of VL high priority weights */
391 #define HFI1_IB_CFG_VL_LOW_CAP 12 /* num of VL low priority weights */
392 #define HFI1_IB_CFG_OVERRUN_THRESH 13 /* IB overrun threshold */
393 #define HFI1_IB_CFG_PHYERR_THRESH 14 /* IB PHY error threshold */
394 #define HFI1_IB_CFG_LINKDEFAULT 15 /* IB link default (sleep/poll) */
395 #define HFI1_IB_CFG_PKEYS 16 /* update partition keys */
396 #define HFI1_IB_CFG_MTU 17 /* update MTU in IBC */
397 #define HFI1_IB_CFG_VL_HIGH_LIMIT 19
398 #define HFI1_IB_CFG_PMA_TICKS 20 /* PMA sample tick resolution */
399 #define HFI1_IB_CFG_PORT 21 /* switch port we are connected to */
402 * HFI or Host Link States
404 * These describe the states the driver thinks the logical and physical
405 * states are in. Used as an argument to set_link_state(). Implemented
406 * as bits for easy multi-state checking. The actual state can only be
409 #define __HLS_UP_INIT_BP 0
410 #define __HLS_UP_ARMED_BP 1
411 #define __HLS_UP_ACTIVE_BP 2
412 #define __HLS_DN_DOWNDEF_BP 3 /* link down default */
413 #define __HLS_DN_POLL_BP 4
414 #define __HLS_DN_DISABLE_BP 5
415 #define __HLS_DN_OFFLINE_BP 6
416 #define __HLS_VERIFY_CAP_BP 7
417 #define __HLS_GOING_UP_BP 8
418 #define __HLS_GOING_OFFLINE_BP 9
419 #define __HLS_LINK_COOLDOWN_BP 10
421 #define HLS_UP_INIT BIT(__HLS_UP_INIT_BP)
422 #define HLS_UP_ARMED BIT(__HLS_UP_ARMED_BP)
423 #define HLS_UP_ACTIVE BIT(__HLS_UP_ACTIVE_BP)
424 #define HLS_DN_DOWNDEF BIT(__HLS_DN_DOWNDEF_BP) /* link down default */
425 #define HLS_DN_POLL BIT(__HLS_DN_POLL_BP)
426 #define HLS_DN_DISABLE BIT(__HLS_DN_DISABLE_BP)
427 #define HLS_DN_OFFLINE BIT(__HLS_DN_OFFLINE_BP)
428 #define HLS_VERIFY_CAP BIT(__HLS_VERIFY_CAP_BP)
429 #define HLS_GOING_UP BIT(__HLS_GOING_UP_BP)
430 #define HLS_GOING_OFFLINE BIT(__HLS_GOING_OFFLINE_BP)
431 #define HLS_LINK_COOLDOWN BIT(__HLS_LINK_COOLDOWN_BP)
433 #define HLS_UP (HLS_UP_INIT | HLS_UP_ARMED | HLS_UP_ACTIVE)
434 #define HLS_DOWN ~(HLS_UP)
436 /* use this MTU size if none other is given */
437 #define HFI1_DEFAULT_ACTIVE_MTU 10240
438 /* use this MTU size as the default maximum */
439 #define HFI1_DEFAULT_MAX_MTU 10240
440 /* default partition key */
441 #define DEFAULT_PKEY 0xffff
444 * Possible fabric manager config parameters for fm_{get,set}_table()
446 #define FM_TBL_VL_HIGH_ARB 1 /* Get/set VL high prio weights */
447 #define FM_TBL_VL_LOW_ARB 2 /* Get/set VL low prio weights */
448 #define FM_TBL_BUFFER_CONTROL 3 /* Get/set Buffer Control */
449 #define FM_TBL_SC2VLNT 4 /* Get/set SC->VLnt */
450 #define FM_TBL_VL_PREEMPT_ELEMS 5 /* Get (no set) VL preempt elems */
451 #define FM_TBL_VL_PREEMPT_MATRIX 6 /* Get (no set) VL preempt matrix */
454 * Possible "operations" for f_rcvctrl(ppd, op, ctxt)
455 * these are bits so they can be combined, e.g.
456 * HFI1_RCVCTRL_INTRAVAIL_ENB | HFI1_RCVCTRL_CTXT_ENB
458 #define HFI1_RCVCTRL_TAILUPD_ENB 0x01
459 #define HFI1_RCVCTRL_TAILUPD_DIS 0x02
460 #define HFI1_RCVCTRL_CTXT_ENB 0x04
461 #define HFI1_RCVCTRL_CTXT_DIS 0x08
462 #define HFI1_RCVCTRL_INTRAVAIL_ENB 0x10
463 #define HFI1_RCVCTRL_INTRAVAIL_DIS 0x20
464 #define HFI1_RCVCTRL_PKEY_ENB 0x40 /* Note, default is enabled */
465 #define HFI1_RCVCTRL_PKEY_DIS 0x80
466 #define HFI1_RCVCTRL_TIDFLOW_ENB 0x0400
467 #define HFI1_RCVCTRL_TIDFLOW_DIS 0x0800
468 #define HFI1_RCVCTRL_ONE_PKT_EGR_ENB 0x1000
469 #define HFI1_RCVCTRL_ONE_PKT_EGR_DIS 0x2000
470 #define HFI1_RCVCTRL_NO_RHQ_DROP_ENB 0x4000
471 #define HFI1_RCVCTRL_NO_RHQ_DROP_DIS 0x8000
472 #define HFI1_RCVCTRL_NO_EGR_DROP_ENB 0x10000
473 #define HFI1_RCVCTRL_NO_EGR_DROP_DIS 0x20000
475 /* partition enforcement flags */
476 #define HFI1_PART_ENFORCE_IN 0x1
477 #define HFI1_PART_ENFORCE_OUT 0x2
479 /* how often we check for synthetic counter wrap around */
480 #define SYNTH_CNT_TIME 3
483 #define CNTR_NORMAL 0x0 /* Normal counters, just read register */
484 #define CNTR_SYNTH 0x1 /* Synthetic counters, saturate at all 1s */
485 #define CNTR_DISABLED 0x2 /* Disable this counter */
486 #define CNTR_32BIT 0x4 /* Simulate 64 bits for this counter */
487 #define CNTR_VL 0x8 /* Per VL counter */
488 #define CNTR_SDMA 0x10
489 #define CNTR_INVALID_VL -1 /* Specifies invalid VL */
490 #define CNTR_MODE_W 0x0
491 #define CNTR_MODE_R 0x1
493 /* VLs Supported/Operational */
494 #define HFI1_MIN_VLS_SUPPORTED 1
495 #define HFI1_MAX_VLS_SUPPORTED 8
497 #define HFI1_GUIDS_PER_PORT 5
498 #define HFI1_PORT_GUID_INDEX 0
500 static inline void incr_cntr64(u64
*cntr
)
502 if (*cntr
< (u64
)-1LL)
506 static inline void incr_cntr32(u32
*cntr
)
508 if (*cntr
< (u32
)-1LL)
512 #define MAX_NAME_SIZE 64
513 struct hfi1_msix_entry
{
515 struct msix_entry msix
;
517 char name
[MAX_NAME_SIZE
];
519 struct irq_affinity_notify notify
;
522 /* per-SL CCA information */
524 struct hrtimer hrtimer
;
525 struct hfi1_pportdata
*ppd
; /* read-only */
526 int sl
; /* read-only */
527 u16 ccti
; /* read/write - current value of CCTI */
530 struct link_down_reason
{
532 * SMA-facing value. Should be set from .latest when
533 * HLS_UP_* -> HLS_DN_* transition actually occurs.
545 struct vl_arb_cache
{
546 /* protect vl arb cache */
548 struct ib_vl_weight_elem table
[VL_ARB_TABLE_SIZE
];
552 * The structure below encapsulates data relevant to a physical IB Port.
553 * Current chips support only one such port, but the separation
554 * clarifies things a bit. Note that to conform to IB conventions,
555 * port-numbers are one-based. The first or only port is port1.
557 struct hfi1_pportdata
{
558 struct hfi1_ibport ibport_data
;
560 struct hfi1_devdata
*dd
;
561 struct kobject pport_cc_kobj
;
562 struct kobject sc2vl_kobj
;
563 struct kobject sl2sc_kobj
;
564 struct kobject vl2mtu_kobj
;
567 struct qsfp_data qsfp_info
;
568 /* Values for SI tuning of SerDes */
578 /* GUIDs for this interface, in host order, guids[0] is a port guid */
579 u64 guids
[HFI1_GUIDS_PER_PORT
];
581 /* GUID for peer interface, in host order */
584 /* up or down physical link state */
588 * this address is mapped read-only into user processes so they can
589 * get status cheaply, whenever they want. One qword of status per port
593 /* SendDMA related entries */
595 struct workqueue_struct
*hfi1_wq
;
597 /* move out of interrupt context */
598 struct work_struct link_vc_work
;
599 struct work_struct link_up_work
;
600 struct work_struct link_down_work
;
601 struct work_struct sma_message_work
;
602 struct work_struct freeze_work
;
603 struct work_struct link_downgrade_work
;
604 struct work_struct link_bounce_work
;
605 struct delayed_work start_link_work
;
606 /* host link state variables */
607 struct mutex hls_lock
;
610 u32 lstate
; /* logical link state */
612 /* these are the "32 bit" regs */
614 u32 ibmtu
; /* The MTU programmed for this unit */
616 * Current max size IB packet (in bytes) including IB headers, that
617 * we can send. Changes when ibmtu changes.
620 u32 current_egress_rate
; /* units [10^6 bits/sec] */
621 /* LID programmed for this instance */
623 /* list of pkeys programmed; 0 if not set */
624 u16 pkeys
[MAX_PKEY_VALUES
];
625 u16 link_width_supported
;
626 u16 link_width_downgrade_supported
;
627 u16 link_speed_supported
;
628 u16 link_width_enabled
;
629 u16 link_width_downgrade_enabled
;
630 u16 link_speed_enabled
;
631 u16 link_width_active
;
632 u16 link_width_downgrade_tx_active
;
633 u16 link_width_downgrade_rx_active
;
634 u16 link_speed_active
;
637 u8 actual_vls_operational
;
638 /* LID mask control */
640 /* Rx Polarity inversion (compensate for ~tx on partner) */
643 u8 hw_pidx
; /* physical port index */
644 u8 port
; /* IB port number and index into dd->pports - 1 */
645 /* type of neighbor node */
648 u8 neighbor_fm_security
; /* 1 if firmware checking is disabled */
649 u8 neighbor_port_number
;
650 u8 is_sm_config_started
;
651 u8 offline_disabled_reason
;
652 u8 is_active_optimize_enabled
;
653 u8 driver_link_ready
; /* driver ready for active link */
654 u8 link_enabled
; /* link enabled? */
656 u8 local_tx_rate
; /* rate given to 8051 firmware */
657 u8 last_pstate
; /* info only */
660 /* placeholders for IB MAD packet settings */
661 u8 overrun_threshold
;
662 u8 phy_error_threshold
;
664 /* Used to override LED behavior for things like maintenance beaconing*/
666 * Alternates per phase of blink
667 * [0] holds LED off duration, [1] holds LED on duration
669 unsigned long led_override_vals
[2];
670 u8 led_override_phase
; /* LSB picks from vals[] */
671 atomic_t led_override_timer_active
;
672 /* Used to flash LEDs in override mode */
673 struct timer_list led_override_timer
;
679 * cca_timer_lock protects access to the per-SL cca_timer
680 * structures (specifically the ccti member).
682 spinlock_t cca_timer_lock ____cacheline_aligned_in_smp
;
683 struct cca_timer cca_timer
[OPA_MAX_SLS
];
685 /* List of congestion control table entries */
686 struct ib_cc_table_entry_shadow ccti_entries
[CC_TABLE_SHADOW_MAX
];
688 /* congestion entries, each entry corresponding to a SL */
689 struct opa_congestion_setting_entry_shadow
690 congestion_entries
[OPA_MAX_SLS
];
693 * cc_state_lock protects (write) access to the per-port
696 spinlock_t cc_state_lock ____cacheline_aligned_in_smp
;
698 struct cc_state __rcu
*cc_state
;
700 /* Total number of congestion control table entries */
703 /* Bit map identifying service level */
704 u32 cc_sl_control_map
;
706 /* CA's max number of 64 entry units in the congestion control table */
707 u8 cc_max_table_entries
;
710 * begin congestion log related entries
711 * cc_log_lock protects all congestion log related data
713 spinlock_t cc_log_lock ____cacheline_aligned_in_smp
;
714 u8 threshold_cong_event_map
[OPA_MAX_SLS
/ 8];
715 u16 threshold_event_counter
;
716 struct opa_hfi1_cong_log_event_internal cc_events
[OPA_CONG_LOG_ELEMS
];
717 int cc_log_idx
; /* index for logging events */
718 int cc_mad_idx
; /* index for reporting events */
719 /* end congestion log related entries */
721 struct vl_arb_cache vl_arb_cache
[MAX_PRIO_TABLE
];
723 /* port relative counter buffer */
725 /* port relative synthetic counter buffer */
727 /* port_xmit_discards are synthesized from different egress errors */
728 u64 port_xmit_discards
;
729 u64 port_xmit_discards_vl
[C_VL_COUNT
];
730 u64 port_xmit_constraint_errors
;
731 u64 port_rcv_constraint_errors
;
732 /* count of 'link_err' interrupts from DC */
734 /* number of times link retrained successfully */
736 /* number of times a link unknown frame was reported */
737 u64 unknown_frame_count
;
738 /* port_ltp_crc_mode is returned in 'portinfo' MADs */
739 u16 port_ltp_crc_mode
;
740 /* port_crc_mode_enabled is the crc we support */
741 u8 port_crc_mode_enabled
;
742 /* mgmt_allowed is also returned in 'portinfo' MADs */
744 u8 part_enforce
; /* partition enforcement flags */
745 struct link_down_reason local_link_down_reason
;
746 struct link_down_reason neigh_link_down_reason
;
747 /* Value to be sent to link peer on LinkDown .*/
748 u8 remote_link_down_reason
;
749 /* Error events that will cause a port bounce. */
750 u32 port_error_action
;
751 struct work_struct linkstate_active_work
;
752 /* Does this port need to prescan for FECNs */
756 typedef int (*rhf_rcv_function_ptr
)(struct hfi1_packet
*packet
);
758 typedef void (*opcode_handler
)(struct hfi1_packet
*packet
);
760 /* return values for the RHF receive functions */
761 #define RHF_RCV_CONTINUE 0 /* keep going */
762 #define RHF_RCV_DONE 1 /* stop, this packet processed */
763 #define RHF_RCV_REPROCESS 2 /* stop. retain this packet */
765 struct rcv_array_data
{
773 struct send_context
*sc
;
776 /* 16 to directly index */
777 #define PER_VL_SEND_CONTEXTS 16
779 struct err_info_rcvport
{
785 struct err_info_constraint
{
792 unsigned int curr
; /* current temperature */
793 unsigned int lo_lim
; /* low temperature limit */
794 unsigned int hi_lim
; /* high temperature limit */
795 unsigned int crit_lim
; /* critical temperature limit */
796 u8 triggers
; /* temperature triggers */
799 struct hfi1_i2c_bus
{
800 struct hfi1_devdata
*controlling_dd
; /* current controlling device */
801 struct i2c_adapter adapter
; /* bus details */
802 struct i2c_algo_bit_data algo
; /* bus algorithm details */
803 int num
; /* bus number, 0 or 1 */
806 /* common data between shared ASIC HFIs */
807 struct hfi1_asic_data
{
808 struct hfi1_devdata
*dds
[2]; /* back pointers */
809 struct mutex asic_resource_mutex
;
810 struct hfi1_i2c_bus
*i2c_bus0
;
811 struct hfi1_i2c_bus
*i2c_bus1
;
814 /* sizes for both the QP and RSM map tables */
815 #define NUM_MAP_ENTRIES 256
816 #define NUM_MAP_REGS 32
819 * Number of VNIC contexts used. Ensure it is less than or equal to
820 * max queues supported by VNIC (HFI1_VNIC_MAX_QUEUE).
822 #define HFI1_NUM_VNIC_CTXT 8
824 /* Number of VNIC RSM entries */
825 #define NUM_VNIC_MAP_ENTRIES 8
827 /* Virtual NIC information */
828 struct hfi1_vnic_data
{
829 struct hfi1_ctxtdata
*ctxt
[HFI1_NUM_VNIC_CTXT
];
830 struct kmem_cache
*txreq_cache
;
838 struct hfi1_vnic_vport_info
;
840 /* device data struct now contains only "general per-device" info.
841 * fields related to a physical IB port are in a hfi1_pportdata struct.
846 #define BOARD_VERS_MAX 96 /* how long the version string can be */
847 #define SERIAL_MAX 16 /* length of the serial number */
849 typedef int (*send_routine
)(struct rvt_qp
*, struct hfi1_pkt_state
*, u64
);
850 struct hfi1_devdata
{
851 struct hfi1_ibdev verbs_dev
; /* must be first */
852 struct list_head list
;
853 /* pointers to related structs for this device */
854 /* pci access data structure */
855 struct pci_dev
*pcidev
;
856 struct cdev user_cdev
;
857 struct cdev diag_cdev
;
859 struct device
*user_device
;
860 struct device
*diag_device
;
861 struct device
*ui_device
;
863 /* mem-mapped pointer to base of chip regs */
864 u8 __iomem
*kregbase
;
865 /* end of mem-mapped chip space excluding sendbuf and user regs */
867 /* physical address of chip for io_remap, etc. */
868 resource_size_t physaddr
;
869 /* Per VL data. Enough for all VLs but not all elements are set/used. */
870 struct per_vl_data vld
[PER_VL_SEND_CONTEXTS
];
871 /* send context data */
872 struct send_context_info
*send_contexts
;
873 /* map hardware send contexts to software index */
875 /* spinlock for allocating and releasing send context resources */
877 /* lock for pio_map */
878 spinlock_t pio_map_lock
;
879 /* Send Context initialization lock. */
880 spinlock_t sc_init_lock
;
881 /* lock for sdma_map */
882 spinlock_t sde_map_lock
;
883 /* array of kernel send contexts */
884 struct send_context
**kernel_send_context
;
885 /* array of vl maps */
886 struct pio_vl_map __rcu
*pio_map
;
887 /* default flags to last descriptor */
890 /* fields common to all SDMA engines */
892 volatile __le64
*sdma_heads_dma
; /* DMA'ed by chip */
893 dma_addr_t sdma_heads_phys
;
894 void *sdma_pad_dma
; /* DMA'ed by chip */
895 dma_addr_t sdma_pad_phys
;
896 /* for deallocation */
897 size_t sdma_heads_size
;
898 /* number from the chip */
899 u32 chip_sdma_engines
;
902 /* array of engines sized by num_sdma */
903 struct sdma_engine
*per_sdma
;
904 /* array of vl maps */
905 struct sdma_vl_map __rcu
*sdma_map
;
906 /* SPC freeze waitqueue and variable */
907 wait_queue_head_t sdma_unfreeze_wq
;
908 atomic_t sdma_unfreeze_count
;
910 u32 lcb_access_count
; /* count of LCB users */
912 /* common data between shared ASIC HFIs in this OS */
913 struct hfi1_asic_data
*asic_data
;
915 /* mem-mapped pointer to base of PIO buffers */
916 void __iomem
*piobase
;
918 * write-combining mem-mapped pointer to base of RcvArray
921 void __iomem
*rcvarray_wc
;
923 * credit return base - a per-NUMA range of DMA address that
924 * the chip will use to update the per-context free counter
926 struct credit_return_base
*cr_base
;
928 /* send context numbers and sizes for each type */
929 struct sc_config_sizes sc_sizes
[SC_MAX
];
931 char *boardname
; /* human readable board info */
938 u64 __percpu
*send_schedule
;
939 /* number of receive contexts in use by the driver */
940 u32 num_rcv_contexts
;
941 /* number of pio send contexts in use by the driver */
942 u32 num_send_contexts
;
944 * number of ctxts available for PSM open
947 /* total number of available user/PSM contexts */
948 u32 num_user_contexts
;
949 /* base receive interrupt timeout, in CSR units */
950 u32 rcv_intr_timeout_csr
;
952 u32 freezelen
; /* max length of freezemsg */
953 u64 __iomem
*egrtidbase
;
954 spinlock_t sendctrl_lock
; /* protect changes to SendCtrl */
955 spinlock_t rcvctrl_lock
; /* protect changes to RcvCtrl */
956 /* around rcd and (user ctxts) ctxt_cnt use (intr vs free) */
957 spinlock_t uctxt_lock
; /* rcd and user context changes */
958 struct mutex dc8051_lock
; /* exclusive access to 8051 */
959 struct workqueue_struct
*update_cntr_wq
;
960 struct work_struct update_cntr_work
;
961 /* exclusive access to 8051 memory */
962 spinlock_t dc8051_memlock
;
963 int dc8051_timed_out
; /* remember if the 8051 timed out */
965 * A page that will hold event notification bitmaps for all
966 * contexts. This page will be mapped into all processes.
968 unsigned long *events
;
970 * per unit status, see also portdata statusp
971 * mapped read-only into user processes so they can get unit and
972 * IB link status cheaply
974 struct hfi1_status
*status
;
976 /* revision register shadow */
978 /* Base GUID for device (network order) */
981 /* these are the "32 bit" regs */
983 /* value we put in kr_rcvhdrsize */
985 /* number of receive contexts the chip supports */
986 u32 chip_rcv_contexts
;
987 /* number of receive array entries */
988 u32 chip_rcv_array_count
;
989 /* number of PIO send contexts the chip supports */
990 u32 chip_send_contexts
;
991 /* number of bytes in the PIO memory buffer */
992 u32 chip_pio_mem_size
;
993 /* number of bytes in the SDMA memory buffer */
994 u32 chip_sdma_mem_size
;
996 /* size of each rcvegrbuffer */
999 u16 rcvegrbufsize_shift
;
1000 /* both sides of the PCIe link are gen3 capable */
1001 u8 link_gen3_capable
;
1002 /* default link down value (poll/sleep) */
1004 /* localbus width (1, 2,4,8,16,32) from config space */
1006 /* localbus speed in MHz */
1008 int unit
; /* unit # of this chip */
1009 int node
; /* home node of this chip */
1011 /* save these PCI fields to restore after a reset */
1024 * ASCII serial number, from flash, large enough for original
1025 * all digit strings, and longer serial number format
1027 u8 serial
[SERIAL_MAX
];
1028 /* human readable board version */
1029 u8 boardversion
[BOARD_VERS_MAX
];
1030 u8 lbus_info
[32]; /* human readable localbus info */
1031 /* chip major rev, from CceRevision */
1033 /* chip minor rev, from CceRevision */
1037 /* implementation code */
1039 /* vAU of this device */
1041 /* vCU of this device */
1043 /* link credits of this device */
1045 /* initial vl15 credits to use */
1048 /* Misc small ints */
1052 u16 irev
; /* implementation revision */
1053 u32 dc8051_ver
; /* 8051 firmware version */
1055 spinlock_t hfi1_diag_trans_lock
; /* protect diag observer ops */
1056 struct platform_config platform_config
;
1057 struct platform_config_cache pcfg_cache
;
1059 struct diag_client
*diag_client
;
1061 /* MSI-X information */
1062 struct hfi1_msix_entry
*msix_entries
;
1063 u32 num_msix_entries
;
1064 u32 first_dyn_msix_idx
;
1066 /* INTx information */
1067 u32 requested_intx_irq
; /* did we request one? */
1068 char intx_name
[MAX_NAME_SIZE
]; /* INTx name */
1070 /* general interrupt: mask of handled interrupts */
1071 u64 gi_mask
[CCE_NUM_INT_CSRS
];
1073 struct rcv_array_data rcv_entries
;
1075 /* cycle length of PS* counters in HW (in picoseconds) */
1076 u16 psxmitwait_check_rate
;
1079 * 64 bit synthetic counters
1081 struct timer_list synth_stats_timer
;
1087 size_t cntrnameslen
;
1093 * remembered values for synthetic counters
1102 char *portcntrnames
;
1103 size_t portcntrnameslen
;
1105 struct err_info_rcvport err_info_rcvport
;
1106 struct err_info_constraint err_info_rcv_constraint
;
1107 struct err_info_constraint err_info_xmit_constraint
;
1109 atomic_t drop_packet
;
1111 u8 err_info_uncorrectable
;
1112 u8 err_info_fmconfig
;
1115 * Software counters for the status bits defined by the
1116 * associated error status registers
1118 u64 cce_err_status_cnt
[NUM_CCE_ERR_STATUS_COUNTERS
];
1119 u64 rcv_err_status_cnt
[NUM_RCV_ERR_STATUS_COUNTERS
];
1120 u64 misc_err_status_cnt
[NUM_MISC_ERR_STATUS_COUNTERS
];
1121 u64 send_pio_err_status_cnt
[NUM_SEND_PIO_ERR_STATUS_COUNTERS
];
1122 u64 send_dma_err_status_cnt
[NUM_SEND_DMA_ERR_STATUS_COUNTERS
];
1123 u64 send_egress_err_status_cnt
[NUM_SEND_EGRESS_ERR_STATUS_COUNTERS
];
1124 u64 send_err_status_cnt
[NUM_SEND_ERR_STATUS_COUNTERS
];
1126 /* Software counter that spans all contexts */
1127 u64 sw_ctxt_err_status_cnt
[NUM_SEND_CTXT_ERR_STATUS_COUNTERS
];
1128 /* Software counter that spans all DMA engines */
1129 u64 sw_send_dma_eng_err_status_cnt
[
1130 NUM_SEND_DMA_ENG_ERR_STATUS_COUNTERS
];
1131 /* Software counter that aggregates all cce_err_status errors */
1132 u64 sw_cce_err_status_aggregate
;
1133 /* Software counter that aggregates all bypass packet rcv errors */
1134 u64 sw_rcv_bypass_packet_errors
;
1135 /* receive interrupt function */
1136 rhf_rcv_function_ptr normal_rhf_rcv_functions
[8];
1138 /* Save the enabled LCB error bits */
1142 * Capability to have different send engines simply by changing a
1145 send_routine process_pio_send ____cacheline_aligned_in_smp
;
1146 send_routine process_dma_send
;
1147 void (*pio_inline_send
)(struct hfi1_devdata
*dd
, struct pio_buf
*pbuf
,
1148 u64 pbc
, const void *from
, size_t count
);
1149 int (*process_vnic_dma_send
)(struct hfi1_devdata
*dd
, u8 q_idx
,
1150 struct hfi1_vnic_vport_info
*vinfo
,
1151 struct sk_buff
*skb
, u64 pbc
, u8 plen
);
1152 /* hfi1_pportdata, points to array of (physical) port-specific
1153 * data structs, indexed by pidx (0..n-1)
1155 struct hfi1_pportdata
*pport
;
1156 /* receive context data */
1157 struct hfi1_ctxtdata
**rcd
;
1158 u64 __percpu
*int_counter
;
1159 /* device (not port) flags, basically device capabilities */
1161 /* Number of physical ports available */
1163 /* Lowest context number which can be used by user processes or VNIC */
1164 u8 first_dyn_alloc_ctxt
;
1165 /* adding a new field here would make it part of this cacheline */
1167 /* seqlock for sc2vl */
1168 seqlock_t sc2vl_lock ____cacheline_aligned_in_smp
;
1170 /* receive interrupt functions */
1171 rhf_rcv_function_ptr
*rhf_rcv_function_map
;
1172 u64 __percpu
*rcv_limit
;
1173 u16 rhf_offset
; /* offset of RHF within receive header entry */
1174 /* adding a new field here would make it part of this cacheline */
1176 /* OUI comes from the HW. Used everywhere as 3 separate bytes. */
1182 /* Timer and counter used to detect RcvBufOvflCnt changes */
1183 struct timer_list rcverr_timer
;
1185 wait_queue_head_t event_queue
;
1187 /* receive context tail dummy address */
1188 __le64
*rcvhdrtail_dummy_kvaddr
;
1189 dma_addr_t rcvhdrtail_dummy_dma
;
1192 /* Serialize ASPM enable/disable between multiple verbs contexts */
1193 spinlock_t aspm_lock
;
1194 /* Number of verbs contexts which have disabled ASPM */
1195 atomic_t aspm_disabled_cnt
;
1196 /* Keeps track of user space clients */
1197 atomic_t user_refcount
;
1198 /* Used to wait for outstanding user space clients before dev removal */
1199 struct completion user_comp
;
1201 bool eprom_available
; /* true if EPROM is available for this device */
1202 bool aspm_supported
; /* Does HW support ASPM */
1203 bool aspm_enabled
; /* ASPM state: enabled/disabled */
1204 struct rhashtable
*sdma_rht
;
1206 struct kobject kobj
;
1209 struct hfi1_vnic_data vnic
;
1212 static inline bool hfi1_vnic_is_rsm_full(struct hfi1_devdata
*dd
, int spare
)
1214 return (dd
->vnic
.rmt_start
+ spare
) > NUM_MAP_ENTRIES
;
1217 /* 8051 firmware version helper */
1218 #define dc8051_ver(a, b, c) ((a) << 16 | (b) << 8 | (c))
1219 #define dc8051_ver_maj(a) (((a) & 0xff0000) >> 16)
1220 #define dc8051_ver_min(a) (((a) & 0x00ff00) >> 8)
1221 #define dc8051_ver_patch(a) ((a) & 0x0000ff)
1223 /* f_put_tid types */
1224 #define PT_EXPECTED 0
1226 #define PT_INVALID 2
1230 struct mmu_rb_handler
;
1232 /* Private data for file operations */
1233 struct hfi1_filedata
{
1234 struct hfi1_devdata
*dd
;
1235 struct hfi1_ctxtdata
*uctxt
;
1236 struct hfi1_user_sdma_comp_q
*cq
;
1237 struct hfi1_user_sdma_pkt_q
*pq
;
1239 /* for cpu affinity; -1 if none */
1242 struct mmu_rb_handler
*handler
;
1243 struct tid_rb_node
**entry_to_rb
;
1244 spinlock_t tid_lock
; /* protect tid_[limit,used] counters */
1248 u32 invalid_tid_idx
;
1249 /* protect invalid_tids array and invalid_tid_idx */
1250 spinlock_t invalid_lock
;
1251 struct mm_struct
*mm
;
1254 extern struct list_head hfi1_dev_list
;
1255 extern spinlock_t hfi1_devs_lock
;
1256 struct hfi1_devdata
*hfi1_lookup(int unit
);
1257 extern u32 hfi1_cpulist_count
;
1258 extern unsigned long *hfi1_cpulist
;
1260 int hfi1_init(struct hfi1_devdata
*dd
, int reinit
);
1261 int hfi1_count_active_units(void);
1263 int hfi1_diag_add(struct hfi1_devdata
*dd
);
1264 void hfi1_diag_remove(struct hfi1_devdata
*dd
);
1265 void handle_linkup_change(struct hfi1_devdata
*dd
, u32 linkup
);
1267 void handle_user_interrupt(struct hfi1_ctxtdata
*rcd
);
1269 int hfi1_create_rcvhdrq(struct hfi1_devdata
*dd
, struct hfi1_ctxtdata
*rcd
);
1270 int hfi1_setup_eagerbufs(struct hfi1_ctxtdata
*rcd
);
1271 int hfi1_create_ctxts(struct hfi1_devdata
*dd
);
1272 struct hfi1_ctxtdata
*hfi1_create_ctxtdata(struct hfi1_pportdata
*ppd
, u32 ctxt
,
1274 void hfi1_init_pportdata(struct pci_dev
*pdev
, struct hfi1_pportdata
*ppd
,
1275 struct hfi1_devdata
*dd
, u8 hw_pidx
, u8 port
);
1276 void hfi1_free_ctxtdata(struct hfi1_devdata
*dd
, struct hfi1_ctxtdata
*rcd
);
1278 int handle_receive_interrupt(struct hfi1_ctxtdata
*rcd
, int thread
);
1279 int handle_receive_interrupt_nodma_rtail(struct hfi1_ctxtdata
*rcd
, int thread
);
1280 int handle_receive_interrupt_dma_rtail(struct hfi1_ctxtdata
*rcd
, int thread
);
1281 void set_all_slowpath(struct hfi1_devdata
*dd
);
1282 void hfi1_vnic_synchronize_irq(struct hfi1_devdata
*dd
);
1283 void hfi1_set_vnic_msix_info(struct hfi1_ctxtdata
*rcd
);
1284 void hfi1_reset_vnic_msix_info(struct hfi1_ctxtdata
*rcd
);
1286 extern const struct pci_device_id hfi1_pci_tbl
[];
1288 /* receive packet handler dispositions */
1289 #define RCV_PKT_OK 0x0 /* keep going */
1290 #define RCV_PKT_LIMIT 0x1 /* stop, hit limit, start thread */
1291 #define RCV_PKT_DONE 0x2 /* stop, no more packets detected */
1293 /* calculate the current RHF address */
1294 static inline __le32
*get_rhf_addr(struct hfi1_ctxtdata
*rcd
)
1296 return (__le32
*)rcd
->rcvhdrq
+ rcd
->head
+ rcd
->dd
->rhf_offset
;
1299 int hfi1_reset_device(int);
1301 /* return the driver's idea of the logical OPA port state */
1302 static inline u32
driver_lstate(struct hfi1_pportdata
*ppd
)
1305 * The driver does some processing from the time the logical
1306 * link state is at INIT to the time the SM can be notified
1307 * as such. Return IB_PORT_DOWN until the software state
1310 if (ppd
->lstate
== IB_PORT_INIT
&& !(ppd
->host_link_state
& HLS_UP
))
1311 return IB_PORT_DOWN
;
1316 void receive_interrupt_work(struct work_struct
*work
);
1318 /* extract service channel from header and rhf */
1319 static inline int hfi1_9B_get_sc5(struct ib_header
*hdr
, u64 rhf
)
1321 return ib_get_sc(hdr
) | ((!!(rhf_dc_info(rhf
))) << 4);
1324 #define HFI1_JKEY_WIDTH 16
1325 #define HFI1_JKEY_MASK (BIT(16) - 1)
1326 #define HFI1_ADMIN_JKEY_RANGE 32
1329 * J_KEYs are split and allocated in the following groups:
1330 * 0 - 31 - users with administrator privileges
1331 * 32 - 63 - kernel protocols using KDETH packets
1332 * 64 - 65535 - all other users using KDETH packets
1334 static inline u16
generate_jkey(kuid_t uid
)
1336 u16 jkey
= from_kuid(current_user_ns(), uid
) & HFI1_JKEY_MASK
;
1338 if (capable(CAP_SYS_ADMIN
))
1339 jkey
&= HFI1_ADMIN_JKEY_RANGE
- 1;
1341 jkey
|= BIT(HFI1_JKEY_WIDTH
- 1);
1347 * active_egress_rate
1349 * returns the active egress rate in units of [10^6 bits/sec]
1351 static inline u32
active_egress_rate(struct hfi1_pportdata
*ppd
)
1353 u16 link_speed
= ppd
->link_speed_active
;
1354 u16 link_width
= ppd
->link_width_active
;
1357 if (link_speed
== OPA_LINK_SPEED_25G
)
1358 egress_rate
= 25000;
1359 else /* assume OPA_LINK_SPEED_12_5G */
1360 egress_rate
= 12500;
1362 switch (link_width
) {
1363 case OPA_LINK_WIDTH_4X
:
1366 case OPA_LINK_WIDTH_3X
:
1369 case OPA_LINK_WIDTH_2X
:
1373 /* assume IB_WIDTH_1X */
1383 * Returns the number of 'fabric clock cycles' to egress a packet
1384 * of length 'len' bytes, at 'rate' Mbit/s. Since the fabric clock
1385 * rate is (approximately) 805 MHz, the units of the returned value
1388 static inline u32
egress_cycles(u32 len
, u32 rate
)
1395 * (length) [bits] / (rate) [bits/sec]
1396 * ---------------------------------------------------
1397 * fabric_clock_period == 1 /(805 * 10^6) [cycles/sec]
1400 cycles
= len
* 8; /* bits */
1407 void set_link_ipg(struct hfi1_pportdata
*ppd
);
1408 void process_becn(struct hfi1_pportdata
*ppd
, u8 sl
, u16 rlid
, u32 lqpn
,
1409 u32 rqpn
, u8 svc_type
);
1410 void return_cnp(struct hfi1_ibport
*ibp
, struct rvt_qp
*qp
, u32 remote_qpn
,
1411 u32 pkey
, u32 slid
, u32 dlid
, u8 sc5
,
1412 const struct ib_grh
*old_grh
);
1413 #define PKEY_CHECK_INVALID -1
1414 int egress_pkey_check(struct hfi1_pportdata
*ppd
, __be16
*lrh
, __be32
*bth
,
1415 u8 sc5
, int8_t s_pkey_index
);
1417 #define PACKET_EGRESS_TIMEOUT 350
1418 static inline void pause_for_credit_return(struct hfi1_devdata
*dd
)
1420 /* Pause at least 1us, to ensure chip returns all credits */
1421 u32 usec
= cclock_to_ns(dd
, PACKET_EGRESS_TIMEOUT
) / 1000;
1423 udelay(usec
? usec
: 1);
1427 * sc_to_vlt() reverse lookup sc to vl
1431 static inline u8
sc_to_vlt(struct hfi1_devdata
*dd
, u8 sc5
)
1436 if (sc5
>= OPA_MAX_SCS
)
1440 seq
= read_seqbegin(&dd
->sc2vl_lock
);
1441 rval
= *(((u8
*)dd
->sc2vl
) + sc5
);
1442 } while (read_seqretry(&dd
->sc2vl_lock
, seq
));
1447 #define PKEY_MEMBER_MASK 0x8000
1448 #define PKEY_LOW_15_MASK 0x7fff
1451 * ingress_pkey_matches_entry - return 1 if the pkey matches ent (ent
1452 * being an entry from the ingress partition key table), return 0
1453 * otherwise. Use the matching criteria for ingress partition keys
1454 * specified in the OPAv1 spec., section 9.10.14.
1456 static inline int ingress_pkey_matches_entry(u16 pkey
, u16 ent
)
1458 u16 mkey
= pkey
& PKEY_LOW_15_MASK
;
1459 u16 ment
= ent
& PKEY_LOW_15_MASK
;
1463 * If pkey[15] is clear (limited partition member),
1464 * is bit 15 in the corresponding table element
1465 * clear (limited member)?
1467 if (!(pkey
& PKEY_MEMBER_MASK
))
1468 return !!(ent
& PKEY_MEMBER_MASK
);
1475 * ingress_pkey_table_search - search the entire pkey table for
1476 * an entry which matches 'pkey'. return 0 if a match is found,
1479 static int ingress_pkey_table_search(struct hfi1_pportdata
*ppd
, u16 pkey
)
1483 for (i
= 0; i
< MAX_PKEY_VALUES
; i
++) {
1484 if (ingress_pkey_matches_entry(pkey
, ppd
->pkeys
[i
]))
1491 * ingress_pkey_table_fail - record a failure of ingress pkey validation,
1492 * i.e., increment port_rcv_constraint_errors for the port, and record
1493 * the 'error info' for this failure.
1495 static void ingress_pkey_table_fail(struct hfi1_pportdata
*ppd
, u16 pkey
,
1498 struct hfi1_devdata
*dd
= ppd
->dd
;
1500 incr_cntr64(&ppd
->port_rcv_constraint_errors
);
1501 if (!(dd
->err_info_rcv_constraint
.status
& OPA_EI_STATUS_SMASK
)) {
1502 dd
->err_info_rcv_constraint
.status
|= OPA_EI_STATUS_SMASK
;
1503 dd
->err_info_rcv_constraint
.slid
= slid
;
1504 dd
->err_info_rcv_constraint
.pkey
= pkey
;
1509 * ingress_pkey_check - Return 0 if the ingress pkey is valid, return 1
1510 * otherwise. Use the criteria in the OPAv1 spec, section 9.10.14. idx
1511 * is a hint as to the best place in the partition key table to begin
1512 * searching. This function should not be called on the data path because
1513 * of performance reasons. On datapath pkey check is expected to be done
1514 * by HW and rcv_pkey_check function should be called instead.
1516 static inline int ingress_pkey_check(struct hfi1_pportdata
*ppd
, u16 pkey
,
1517 u8 sc5
, u8 idx
, u16 slid
)
1519 if (!(ppd
->part_enforce
& HFI1_PART_ENFORCE_IN
))
1522 /* If SC15, pkey[0:14] must be 0x7fff */
1523 if ((sc5
== 0xf) && ((pkey
& PKEY_LOW_15_MASK
) != PKEY_LOW_15_MASK
))
1526 /* Is the pkey = 0x0, or 0x8000? */
1527 if ((pkey
& PKEY_LOW_15_MASK
) == 0)
1530 /* The most likely matching pkey has index 'idx' */
1531 if (ingress_pkey_matches_entry(pkey
, ppd
->pkeys
[idx
]))
1534 /* no match - try the whole table */
1535 if (!ingress_pkey_table_search(ppd
, pkey
))
1539 ingress_pkey_table_fail(ppd
, pkey
, slid
);
1544 * rcv_pkey_check - Return 0 if the ingress pkey is valid, return 1
1545 * otherwise. It only ensures pkey is vlid for QP0. This function
1546 * should be called on the data path instead of ingress_pkey_check
1547 * as on data path, pkey check is done by HW (except for QP0).
1549 static inline int rcv_pkey_check(struct hfi1_pportdata
*ppd
, u16 pkey
,
1552 if (!(ppd
->part_enforce
& HFI1_PART_ENFORCE_IN
))
1555 /* If SC15, pkey[0:14] must be 0x7fff */
1556 if ((sc5
== 0xf) && ((pkey
& PKEY_LOW_15_MASK
) != PKEY_LOW_15_MASK
))
1561 ingress_pkey_table_fail(ppd
, pkey
, slid
);
1567 /* MTU enumeration, 256-4k match IB */
1569 #define OPA_MTU_256 1
1570 #define OPA_MTU_512 2
1571 #define OPA_MTU_1024 3
1572 #define OPA_MTU_2048 4
1573 #define OPA_MTU_4096 5
1575 u32
lrh_max_header_bytes(struct hfi1_devdata
*dd
);
1576 int mtu_to_enum(u32 mtu
, int default_if_bad
);
1577 u16
enum_to_mtu(int mtu
);
1578 static inline int valid_ib_mtu(unsigned int mtu
)
1580 return mtu
== 256 || mtu
== 512 ||
1581 mtu
== 1024 || mtu
== 2048 ||
1585 static inline int valid_opa_max_mtu(unsigned int mtu
)
1587 return mtu
>= 2048 &&
1588 (valid_ib_mtu(mtu
) || mtu
== 8192 || mtu
== 10240);
1591 int set_mtu(struct hfi1_pportdata
*ppd
);
1593 int hfi1_set_lid(struct hfi1_pportdata
*ppd
, u32 lid
, u8 lmc
);
1594 void hfi1_disable_after_error(struct hfi1_devdata
*dd
);
1595 int hfi1_set_uevent_bits(struct hfi1_pportdata
*ppd
, const int evtbit
);
1596 int hfi1_rcvbuf_validate(u32 size
, u8 type
, u16
*encode
);
1598 int fm_get_table(struct hfi1_pportdata
*ppd
, int which
, void *t
);
1599 int fm_set_table(struct hfi1_pportdata
*ppd
, int which
, void *t
);
1601 void set_up_vl15(struct hfi1_devdata
*dd
, u8 vau
, u16 vl15buf
);
1602 void reset_link_credits(struct hfi1_devdata
*dd
);
1603 void assign_remote_cm_au_table(struct hfi1_devdata
*dd
, u8 vcu
);
1605 int set_buffer_control(struct hfi1_pportdata
*ppd
, struct buffer_control
*bc
);
1607 static inline struct hfi1_devdata
*dd_from_ppd(struct hfi1_pportdata
*ppd
)
1612 static inline struct hfi1_devdata
*dd_from_dev(struct hfi1_ibdev
*dev
)
1614 return container_of(dev
, struct hfi1_devdata
, verbs_dev
);
1617 static inline struct hfi1_devdata
*dd_from_ibdev(struct ib_device
*ibdev
)
1619 return dd_from_dev(to_idev(ibdev
));
1622 static inline struct hfi1_pportdata
*ppd_from_ibp(struct hfi1_ibport
*ibp
)
1624 return container_of(ibp
, struct hfi1_pportdata
, ibport_data
);
1627 static inline struct hfi1_ibdev
*dev_from_rdi(struct rvt_dev_info
*rdi
)
1629 return container_of(rdi
, struct hfi1_ibdev
, rdi
);
1632 static inline struct hfi1_ibport
*to_iport(struct ib_device
*ibdev
, u8 port
)
1634 struct hfi1_devdata
*dd
= dd_from_ibdev(ibdev
);
1635 unsigned pidx
= port
- 1; /* IB number port from 1, hdw from 0 */
1637 WARN_ON(pidx
>= dd
->num_pports
);
1638 return &dd
->pport
[pidx
].ibport_data
;
1641 static inline struct hfi1_ibport
*rcd_to_iport(struct hfi1_ctxtdata
*rcd
)
1643 return &rcd
->ppd
->ibport_data
;
1646 void hfi1_process_ecn_slowpath(struct rvt_qp
*qp
, struct hfi1_packet
*pkt
,
1648 static inline bool process_ecn(struct rvt_qp
*qp
, struct hfi1_packet
*pkt
,
1651 struct ib_other_headers
*ohdr
= pkt
->ohdr
;
1654 bth1
= be32_to_cpu(ohdr
->bth
[1]);
1655 if (unlikely(bth1
& (IB_BECN_SMASK
| IB_FECN_SMASK
))) {
1656 hfi1_process_ecn_slowpath(qp
, pkt
, do_cnp
);
1657 return !!(bth1
& IB_FECN_SMASK
);
1663 * Return the indexed PKEY from the port PKEY table.
1665 static inline u16
hfi1_get_pkey(struct hfi1_ibport
*ibp
, unsigned index
)
1667 struct hfi1_pportdata
*ppd
= ppd_from_ibp(ibp
);
1670 if (index
>= ARRAY_SIZE(ppd
->pkeys
))
1673 ret
= ppd
->pkeys
[index
];
1679 * Return the indexed GUID from the port GUIDs table.
1681 static inline __be64
get_sguid(struct hfi1_ibport
*ibp
, unsigned int index
)
1683 struct hfi1_pportdata
*ppd
= ppd_from_ibp(ibp
);
1685 WARN_ON(index
>= HFI1_GUIDS_PER_PORT
);
1686 return cpu_to_be64(ppd
->guids
[index
]);
1690 * Called by readers of cc_state only, must call under rcu_read_lock().
1692 static inline struct cc_state
*get_cc_state(struct hfi1_pportdata
*ppd
)
1694 return rcu_dereference(ppd
->cc_state
);
1698 * Called by writers of cc_state only, must call under cc_state_lock.
1701 struct cc_state
*get_cc_state_protected(struct hfi1_pportdata
*ppd
)
1703 return rcu_dereference_protected(ppd
->cc_state
,
1704 lockdep_is_held(&ppd
->cc_state_lock
));
1708 * values for dd->flags (_device_ related flags)
1710 #define HFI1_INITTED 0x1 /* chip and driver up and initted */
1711 #define HFI1_PRESENT 0x2 /* chip accesses can be done */
1712 #define HFI1_FROZEN 0x4 /* chip in SPC freeze */
1713 #define HFI1_HAS_SDMA_TIMEOUT 0x8
1714 #define HFI1_HAS_SEND_DMA 0x10 /* Supports Send DMA */
1715 #define HFI1_FORCED_FREEZE 0x80 /* driver forced freeze mode */
1717 /* IB dword length mask in PBC (lower 11 bits); same for all chips */
1718 #define HFI1_PBC_LENGTH_MASK ((1 << 11) - 1)
1720 /* ctxt_flag bit offsets */
1721 /* base context has not finished initializing */
1722 #define HFI1_CTXT_BASE_UNINIT 1
1723 /* base context initaliation failed */
1724 #define HFI1_CTXT_BASE_FAILED 2
1725 /* waiting for a packet to arrive */
1726 #define HFI1_CTXT_WAITING_RCV 3
1727 /* waiting for an urgent packet to arrive */
1728 #define HFI1_CTXT_WAITING_URG 4
1730 /* free up any allocated data at closes */
1731 struct hfi1_devdata
*hfi1_init_dd(struct pci_dev
*pdev
,
1732 const struct pci_device_id
*ent
);
1733 void hfi1_free_devdata(struct hfi1_devdata
*dd
);
1734 struct hfi1_devdata
*hfi1_alloc_devdata(struct pci_dev
*pdev
, size_t extra
);
1736 /* LED beaconing functions */
1737 void hfi1_start_led_override(struct hfi1_pportdata
*ppd
, unsigned int timeon
,
1738 unsigned int timeoff
);
1739 void shutdown_led_override(struct hfi1_pportdata
*ppd
);
1741 #define HFI1_CREDIT_RETURN_RATE (100)
1744 * The number of words for the KDETH protocol field. If this is
1745 * larger then the actual field used, then part of the payload
1746 * will be in the header.
1748 * Optimally, we want this sized so that a typical case will
1749 * use full cache lines. The typical local KDETH header would
1760 * For a 64-byte cache line, KDETH would need to be 36 bytes or 9 DWORDS
1762 #define DEFAULT_RCVHDRSIZE 9
1765 * Maximal header byte count:
1776 * We also want to maintain a cache line alignment to assist DMA'ing
1777 * of the header bytes. Round up to a good size.
1779 #define DEFAULT_RCVHDR_ENTSIZE 32
1781 bool hfi1_can_pin_pages(struct hfi1_devdata
*dd
, struct mm_struct
*mm
,
1782 u32 nlocked
, u32 npages
);
1783 int hfi1_acquire_user_pages(struct mm_struct
*mm
, unsigned long vaddr
,
1784 size_t npages
, bool writable
, struct page
**pages
);
1785 void hfi1_release_user_pages(struct mm_struct
*mm
, struct page
**p
,
1786 size_t npages
, bool dirty
);
1788 static inline void clear_rcvhdrtail(const struct hfi1_ctxtdata
*rcd
)
1790 *((u64
*)rcd
->rcvhdrtail_kvaddr
) = 0ULL;
1793 static inline u32
get_rcvhdrtail(const struct hfi1_ctxtdata
*rcd
)
1796 * volatile because it's a DMA target from the chip, routine is
1797 * inlined, and don't want register caching or reordering.
1799 return (u32
)le64_to_cpu(*rcd
->rcvhdrtail_kvaddr
);
1806 extern const char ib_hfi1_version
[];
1808 int hfi1_device_create(struct hfi1_devdata
*dd
);
1809 void hfi1_device_remove(struct hfi1_devdata
*dd
);
1811 int hfi1_create_port_files(struct ib_device
*ibdev
, u8 port_num
,
1812 struct kobject
*kobj
);
1813 int hfi1_verbs_register_sysfs(struct hfi1_devdata
*dd
);
1814 void hfi1_verbs_unregister_sysfs(struct hfi1_devdata
*dd
);
1815 /* Hook for sysfs read of QSFP */
1816 int qsfp_dump(struct hfi1_pportdata
*ppd
, char *buf
, int len
);
1818 int hfi1_pcie_init(struct pci_dev
*pdev
, const struct pci_device_id
*ent
);
1819 void hfi1_pcie_cleanup(struct pci_dev
*pdev
);
1820 int hfi1_pcie_ddinit(struct hfi1_devdata
*dd
, struct pci_dev
*pdev
);
1821 void hfi1_pcie_ddcleanup(struct hfi1_devdata
*);
1822 int pcie_speeds(struct hfi1_devdata
*dd
);
1823 void request_msix(struct hfi1_devdata
*dd
, u32
*nent
,
1824 struct hfi1_msix_entry
*entry
);
1825 void hfi1_enable_intx(struct pci_dev
*pdev
);
1826 void restore_pci_variables(struct hfi1_devdata
*dd
);
1827 int do_pcie_gen3_transition(struct hfi1_devdata
*dd
);
1828 int parse_platform_config(struct hfi1_devdata
*dd
);
1829 int get_platform_config_field(struct hfi1_devdata
*dd
,
1830 enum platform_config_table_type_encoding
1831 table_type
, int table_index
, int field_index
,
1832 u32
*data
, u32 len
);
1834 const char *get_unit_name(int unit
);
1835 const char *get_card_name(struct rvt_dev_info
*rdi
);
1836 struct pci_dev
*get_pci_dev(struct rvt_dev_info
*rdi
);
1839 * Flush write combining store buffers (if present) and perform a write
1842 static inline void flush_wc(void)
1844 asm volatile("sfence" : : : "memory");
1847 void handle_eflags(struct hfi1_packet
*packet
);
1848 int process_receive_ib(struct hfi1_packet
*packet
);
1849 int process_receive_bypass(struct hfi1_packet
*packet
);
1850 int process_receive_error(struct hfi1_packet
*packet
);
1851 int kdeth_process_expected(struct hfi1_packet
*packet
);
1852 int kdeth_process_eager(struct hfi1_packet
*packet
);
1853 int process_receive_invalid(struct hfi1_packet
*packet
);
1855 /* global module parameter variables */
1856 extern unsigned int hfi1_max_mtu
;
1857 extern unsigned int hfi1_cu
;
1858 extern unsigned int user_credit_return_threshold
;
1859 extern int num_user_contexts
;
1860 extern unsigned long n_krcvqs
;
1861 extern uint krcvqs
[];
1862 extern int krcvqsset
;
1863 extern uint kdeth_qp
;
1864 extern uint loopback
;
1865 extern uint quick_linkup
;
1866 extern uint rcv_intr_timeout
;
1867 extern uint rcv_intr_count
;
1868 extern uint rcv_intr_dynamic
;
1869 extern ushort link_crc_mask
;
1871 extern struct mutex hfi1_mutex
;
1873 /* Number of seconds before our card status check... */
1874 #define STATUS_TIMEOUT 60
1876 #define DRIVER_NAME "hfi1"
1877 #define HFI1_USER_MINOR_BASE 0
1878 #define HFI1_TRACE_MINOR 127
1879 #define HFI1_NMINORS 255
1881 #define PCI_VENDOR_ID_INTEL 0x8086
1882 #define PCI_DEVICE_ID_INTEL0 0x24f0
1883 #define PCI_DEVICE_ID_INTEL1 0x24f1
1885 #define HFI1_PKT_USER_SC_INTEGRITY \
1886 (SEND_CTXT_CHECK_ENABLE_DISALLOW_NON_KDETH_PACKETS_SMASK \
1887 | SEND_CTXT_CHECK_ENABLE_DISALLOW_KDETH_PACKETS_SMASK \
1888 | SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_SMASK \
1889 | SEND_CTXT_CHECK_ENABLE_DISALLOW_GRH_SMASK)
1891 #define HFI1_PKT_KERNEL_SC_INTEGRITY \
1892 (SEND_CTXT_CHECK_ENABLE_DISALLOW_KDETH_PACKETS_SMASK)
1894 static inline u64
hfi1_pkt_default_send_ctxt_mask(struct hfi1_devdata
*dd
,
1897 u64 base_sc_integrity
;
1899 /* No integrity checks if HFI1_CAP_NO_INTEGRITY is set */
1900 if (HFI1_CAP_IS_KSET(NO_INTEGRITY
))
1904 SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK
1905 | SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK
1906 | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK
1907 | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK
1908 | SEND_CTXT_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK
1909 | SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_TEST_SMASK
1910 | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK
1911 | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK
1912 | SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK
1913 | SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_SMASK
1914 | SEND_CTXT_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK
1915 | SEND_CTXT_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK
1916 | SEND_CTXT_CHECK_ENABLE_CHECK_OPCODE_SMASK
1917 | SEND_CTXT_CHECK_ENABLE_CHECK_SLID_SMASK
1918 | SEND_CTXT_CHECK_ENABLE_CHECK_VL_SMASK
1919 | SEND_CTXT_CHECK_ENABLE_CHECK_ENABLE_SMASK
;
1921 if (ctxt_type
== SC_USER
)
1922 base_sc_integrity
|= HFI1_PKT_USER_SC_INTEGRITY
;
1924 base_sc_integrity
|= HFI1_PKT_KERNEL_SC_INTEGRITY
;
1926 /* turn on send-side job key checks if !A0 */
1928 base_sc_integrity
|= SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK
;
1930 return base_sc_integrity
;
1933 static inline u64
hfi1_pkt_base_sdma_integrity(struct hfi1_devdata
*dd
)
1935 u64 base_sdma_integrity
;
1937 /* No integrity checks if HFI1_CAP_NO_INTEGRITY is set */
1938 if (HFI1_CAP_IS_KSET(NO_INTEGRITY
))
1941 base_sdma_integrity
=
1942 SEND_DMA_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK
1943 | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK
1944 | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK
1945 | SEND_DMA_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK
1946 | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK
1947 | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK
1948 | SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK
1949 | SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_SMASK
1950 | SEND_DMA_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK
1951 | SEND_DMA_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK
1952 | SEND_DMA_CHECK_ENABLE_CHECK_OPCODE_SMASK
1953 | SEND_DMA_CHECK_ENABLE_CHECK_SLID_SMASK
1954 | SEND_DMA_CHECK_ENABLE_CHECK_VL_SMASK
1955 | SEND_DMA_CHECK_ENABLE_CHECK_ENABLE_SMASK
;
1957 if (!HFI1_CAP_IS_KSET(STATIC_RATE_CTRL
))
1958 base_sdma_integrity
|=
1959 SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK
;
1961 /* turn on send-side job key checks if !A0 */
1963 base_sdma_integrity
|=
1964 SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK
;
1966 return base_sdma_integrity
;
1970 * hfi1_early_err is used (only!) to print early errors before devdata is
1971 * allocated, or when dd->pcidev may not be valid, and at the tail end of
1972 * cleanup when devdata may have been freed, etc. hfi1_dev_porterr is
1973 * the same as dd_dev_err, but is used when the message really needs
1974 * the IB port# to be definitive as to what's happening..
1976 #define hfi1_early_err(dev, fmt, ...) \
1977 dev_err(dev, fmt, ##__VA_ARGS__)
1979 #define hfi1_early_info(dev, fmt, ...) \
1980 dev_info(dev, fmt, ##__VA_ARGS__)
1982 #define dd_dev_emerg(dd, fmt, ...) \
1983 dev_emerg(&(dd)->pcidev->dev, "%s: " fmt, \
1984 get_unit_name((dd)->unit), ##__VA_ARGS__)
1985 #define dd_dev_err(dd, fmt, ...) \
1986 dev_err(&(dd)->pcidev->dev, "%s: " fmt, \
1987 get_unit_name((dd)->unit), ##__VA_ARGS__)
1988 #define dd_dev_warn(dd, fmt, ...) \
1989 dev_warn(&(dd)->pcidev->dev, "%s: " fmt, \
1990 get_unit_name((dd)->unit), ##__VA_ARGS__)
1992 #define dd_dev_warn_ratelimited(dd, fmt, ...) \
1993 dev_warn_ratelimited(&(dd)->pcidev->dev, "%s: " fmt, \
1994 get_unit_name((dd)->unit), ##__VA_ARGS__)
1996 #define dd_dev_info(dd, fmt, ...) \
1997 dev_info(&(dd)->pcidev->dev, "%s: " fmt, \
1998 get_unit_name((dd)->unit), ##__VA_ARGS__)
2000 #define dd_dev_info_ratelimited(dd, fmt, ...) \
2001 dev_info_ratelimited(&(dd)->pcidev->dev, "%s: " fmt, \
2002 get_unit_name((dd)->unit), ##__VA_ARGS__)
2004 #define dd_dev_dbg(dd, fmt, ...) \
2005 dev_dbg(&(dd)->pcidev->dev, "%s: " fmt, \
2006 get_unit_name((dd)->unit), ##__VA_ARGS__)
2008 #define hfi1_dev_porterr(dd, port, fmt, ...) \
2009 dev_err(&(dd)->pcidev->dev, "%s: port %u: " fmt, \
2010 get_unit_name((dd)->unit), (port), ##__VA_ARGS__)
2013 * this is used for formatting hw error messages...
2015 struct hfi1_hwerror_msgs
{
2022 void hfi1_format_hwerrors(u64 hwerrs
,
2023 const struct hfi1_hwerror_msgs
*hwerrmsgs
,
2024 size_t nhwerrmsgs
, char *msg
, size_t lmsg
);
2026 #define USER_OPCODE_CHECK_VAL 0xC0
2027 #define USER_OPCODE_CHECK_MASK 0xC0
2028 #define OPCODE_CHECK_VAL_DISABLED 0x0
2029 #define OPCODE_CHECK_MASK_DISABLED 0x0
2031 static inline void hfi1_reset_cpu_counters(struct hfi1_devdata
*dd
)
2033 struct hfi1_pportdata
*ppd
;
2036 dd
->z_int_counter
= get_all_cpu_total(dd
->int_counter
);
2037 dd
->z_rcv_limit
= get_all_cpu_total(dd
->rcv_limit
);
2038 dd
->z_send_schedule
= get_all_cpu_total(dd
->send_schedule
);
2040 ppd
= (struct hfi1_pportdata
*)(dd
+ 1);
2041 for (i
= 0; i
< dd
->num_pports
; i
++, ppd
++) {
2042 ppd
->ibport_data
.rvp
.z_rc_acks
=
2043 get_all_cpu_total(ppd
->ibport_data
.rvp
.rc_acks
);
2044 ppd
->ibport_data
.rvp
.z_rc_qacks
=
2045 get_all_cpu_total(ppd
->ibport_data
.rvp
.rc_qacks
);
2049 /* Control LED state */
2050 static inline void setextled(struct hfi1_devdata
*dd
, u32 on
)
2053 write_csr(dd
, DCC_CFG_LED_CNTRL
, 0x1F);
2055 write_csr(dd
, DCC_CFG_LED_CNTRL
, 0x10);
2058 /* return the i2c resource given the target */
2059 static inline u32
i2c_target(u32 target
)
2061 return target
? CR_I2C2
: CR_I2C1
;
2064 /* return the i2c chain chip resource that this HFI uses for QSFP */
2065 static inline u32
qsfp_resource(struct hfi1_devdata
*dd
)
2067 return i2c_target(dd
->hfi1_id
);
2070 /* Is this device integrated or discrete? */
2071 static inline bool is_integrated(struct hfi1_devdata
*dd
)
2073 return dd
->pcidev
->device
== PCI_DEVICE_ID_INTEL1
;
2076 int hfi1_tempsense_rd(struct hfi1_devdata
*dd
, struct hfi1_temp
*temp
);
2078 #define DD_DEV_ENTRY(dd) __string(dev, dev_name(&(dd)->pcidev->dev))
2079 #define DD_DEV_ASSIGN(dd) __assign_str(dev, dev_name(&(dd)->pcidev->dev))
2081 #define packettype_name(etype) { RHF_RCV_TYPE_##etype, #etype }
2082 #define show_packettype(etype) \
2083 __print_symbolic(etype, \
2084 packettype_name(EXPECTED), \
2085 packettype_name(EAGER), \
2086 packettype_name(IB), \
2087 packettype_name(ERROR), \
2088 packettype_name(BYPASS))
2090 #define ib_opcode_name(opcode) { IB_OPCODE_##opcode, #opcode }
2091 #define show_ib_opcode(opcode) \
2092 __print_symbolic(opcode, \
2093 ib_opcode_name(RC_SEND_FIRST), \
2094 ib_opcode_name(RC_SEND_MIDDLE), \
2095 ib_opcode_name(RC_SEND_LAST), \
2096 ib_opcode_name(RC_SEND_LAST_WITH_IMMEDIATE), \
2097 ib_opcode_name(RC_SEND_ONLY), \
2098 ib_opcode_name(RC_SEND_ONLY_WITH_IMMEDIATE), \
2099 ib_opcode_name(RC_RDMA_WRITE_FIRST), \
2100 ib_opcode_name(RC_RDMA_WRITE_MIDDLE), \
2101 ib_opcode_name(RC_RDMA_WRITE_LAST), \
2102 ib_opcode_name(RC_RDMA_WRITE_LAST_WITH_IMMEDIATE), \
2103 ib_opcode_name(RC_RDMA_WRITE_ONLY), \
2104 ib_opcode_name(RC_RDMA_WRITE_ONLY_WITH_IMMEDIATE), \
2105 ib_opcode_name(RC_RDMA_READ_REQUEST), \
2106 ib_opcode_name(RC_RDMA_READ_RESPONSE_FIRST), \
2107 ib_opcode_name(RC_RDMA_READ_RESPONSE_MIDDLE), \
2108 ib_opcode_name(RC_RDMA_READ_RESPONSE_LAST), \
2109 ib_opcode_name(RC_RDMA_READ_RESPONSE_ONLY), \
2110 ib_opcode_name(RC_ACKNOWLEDGE), \
2111 ib_opcode_name(RC_ATOMIC_ACKNOWLEDGE), \
2112 ib_opcode_name(RC_COMPARE_SWAP), \
2113 ib_opcode_name(RC_FETCH_ADD), \
2114 ib_opcode_name(UC_SEND_FIRST), \
2115 ib_opcode_name(UC_SEND_MIDDLE), \
2116 ib_opcode_name(UC_SEND_LAST), \
2117 ib_opcode_name(UC_SEND_LAST_WITH_IMMEDIATE), \
2118 ib_opcode_name(UC_SEND_ONLY), \
2119 ib_opcode_name(UC_SEND_ONLY_WITH_IMMEDIATE), \
2120 ib_opcode_name(UC_RDMA_WRITE_FIRST), \
2121 ib_opcode_name(UC_RDMA_WRITE_MIDDLE), \
2122 ib_opcode_name(UC_RDMA_WRITE_LAST), \
2123 ib_opcode_name(UC_RDMA_WRITE_LAST_WITH_IMMEDIATE), \
2124 ib_opcode_name(UC_RDMA_WRITE_ONLY), \
2125 ib_opcode_name(UC_RDMA_WRITE_ONLY_WITH_IMMEDIATE), \
2126 ib_opcode_name(UD_SEND_ONLY), \
2127 ib_opcode_name(UD_SEND_ONLY_WITH_IMMEDIATE), \
2128 ib_opcode_name(CNP))
2129 #endif /* _HFI1_KERNEL_H */