Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf

[mirror_ubuntu-focal-kernel.git] / drivers / infiniband / hw / hfi1 / init.c

/*
 * Copyright(c) 2015 - 2018 Intel Corporation.
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * BSD LICENSE
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  - Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  - Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  - Neither the name of Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/idr.h>
#include <linux/module.h>
#include <linux/printk.h>
#include <linux/hrtimer.h>
#include <linux/bitmap.h>
#include <rdma/rdma_vt.h>

#include "hfi.h"
#include "device.h"
#include "common.h"
#include "trace.h"
#include "mad.h"
#include "sdma.h"
#include "debugfs.h"
#include "verbs.h"
#include "aspm.h"
#include "affinity.h"
#include "vnic.h"
#include "exp_rcv.h"

#undef pr_fmt
#define pr_fmt(fmt) DRIVER_NAME ": " fmt

#define HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES 5
/*
 * min buffers we want to have per context, after driver
 */
#define HFI1_MIN_USER_CTXT_BUFCNT 7

#define HFI1_MIN_HDRQ_EGRBUF_CNT 2
#define HFI1_MAX_HDRQ_EGRBUF_CNT 16352
#define HFI1_MIN_EAGER_BUFFER_SIZE (4 * 1024) /* 4KB */
#define HFI1_MAX_EAGER_BUFFER_SIZE (256 * 1024) /* 256KB */

#define NUM_IB_PORTS 1

/*
 * Number of user receive contexts we are configured to use (to allow for more
 * pio buffers per ctxt, etc.)  Zero means use one user context per CPU.
 */
int num_user_contexts = -1;
module_param_named(num_user_contexts, num_user_contexts, int, 0444);
MODULE_PARM_DESC(
        num_user_contexts, "Set max number of user contexts to use (default: -1 will use the real (non-HT) CPU count)");

uint krcvqs[RXE_NUM_DATA_VL];
int krcvqsset;
module_param_array(krcvqs, uint, &krcvqsset, S_IRUGO);
MODULE_PARM_DESC(krcvqs, "Array of the number of non-control kernel receive queues by VL");

/* computed based on above array */
unsigned long n_krcvqs;

static unsigned hfi1_rcvarr_split = 25;
module_param_named(rcvarr_split, hfi1_rcvarr_split, uint, S_IRUGO);
MODULE_PARM_DESC(rcvarr_split, "Percent of context's RcvArray entries used for Eager buffers");

static uint eager_buffer_size = (8 << 20); /* 8MB */
module_param(eager_buffer_size, uint, S_IRUGO);
MODULE_PARM_DESC(eager_buffer_size, "Size of the eager buffers, default: 8MB");

static uint rcvhdrcnt = 2048; /* 2x the max eager buffer count */
module_param_named(rcvhdrcnt, rcvhdrcnt, uint, S_IRUGO);
MODULE_PARM_DESC(rcvhdrcnt, "Receive header queue count (default 2048)");

static uint hfi1_hdrq_entsize = 32;
module_param_named(hdrq_entsize, hfi1_hdrq_entsize, uint, 0444);
MODULE_PARM_DESC(hdrq_entsize, "Size of header queue entries: 2 - 8B, 16 - 64B, 32 - 128B (default)");

unsigned int user_credit_return_threshold = 33; /* default is 33% */
module_param(user_credit_return_threshold, uint, S_IRUGO);
MODULE_PARM_DESC(user_credit_return_threshold, "Credit return threshold for user send contexts, return when unreturned credits passes this many blocks (in percent of allocated blocks, 0 is off)");

static inline u64 encode_rcv_header_entry_size(u16 size);

static struct idr hfi1_unit_table;

static int hfi1_create_kctxt(struct hfi1_devdata *dd,
                             struct hfi1_pportdata *ppd)
{
        struct hfi1_ctxtdata *rcd;
        int ret;

        /* Control context has to be always 0 */
        BUILD_BUG_ON(HFI1_CTRL_CTXT != 0);

        ret = hfi1_create_ctxtdata(ppd, dd->node, &rcd);
        if (ret < 0) {
                dd_dev_err(dd, "Kernel receive context allocation failed\n");
                return ret;
        }

        /*
         * Set up the kernel context flags here and now because they use
         * default values for all receive side memories.  User contexts will
         * be handled as they are created.
         */
        rcd->flags = HFI1_CAP_KGET(MULTI_PKT_EGR) |
                HFI1_CAP_KGET(NODROP_RHQ_FULL) |
                HFI1_CAP_KGET(NODROP_EGR_FULL) |
                HFI1_CAP_KGET(DMA_RTAIL);

        /* Control context must use DMA_RTAIL */
        if (rcd->ctxt == HFI1_CTRL_CTXT)
                rcd->flags |= HFI1_CAP_DMA_RTAIL;
        rcd->seq_cnt = 1;

        rcd->sc = sc_alloc(dd, SC_ACK, rcd->rcvhdrqentsize, dd->node);
        if (!rcd->sc) {
                dd_dev_err(dd, "Kernel send context allocation failed\n");
                return -ENOMEM;
        }
        hfi1_init_ctxt(rcd->sc);

        return 0;
}

/*
 * Create the receive context array and one or more kernel contexts
 */
int hfi1_create_kctxts(struct hfi1_devdata *dd)
{
        u16 i;
        int ret;

        dd->rcd = kcalloc_node(dd->num_rcv_contexts, sizeof(*dd->rcd),
                               GFP_KERNEL, dd->node);
        if (!dd->rcd)
                return -ENOMEM;

        for (i = 0; i < dd->first_dyn_alloc_ctxt; ++i) {
                ret = hfi1_create_kctxt(dd, dd->pport);
                if (ret)
                        goto bail;
        }

        return 0;
bail:
        for (i = 0; dd->rcd && i < dd->first_dyn_alloc_ctxt; ++i)
                hfi1_free_ctxt(dd->rcd[i]);

        /* All the contexts should be freed, free the array */
        kfree(dd->rcd);
        dd->rcd = NULL;
        return ret;
}

/*
 * Helper routines for the receive context reference count (rcd and uctxt).
 */
static void hfi1_rcd_init(struct hfi1_ctxtdata *rcd)
{
        kref_init(&rcd->kref);
}

/**
 * hfi1_rcd_free - When reference is zero clean up.
 * @kref: pointer to an initialized rcd data structure
 *
 */
static void hfi1_rcd_free(struct kref *kref)
{
        unsigned long flags;
        struct hfi1_ctxtdata *rcd =
                container_of(kref, struct hfi1_ctxtdata, kref);

        hfi1_free_ctxtdata(rcd->dd, rcd);

        spin_lock_irqsave(&rcd->dd->uctxt_lock, flags);
        rcd->dd->rcd[rcd->ctxt] = NULL;
        spin_unlock_irqrestore(&rcd->dd->uctxt_lock, flags);

        kfree(rcd);
}

/**
 * hfi1_rcd_put - decrement reference for rcd
 * @rcd: pointer to an initialized rcd data structure
 *
 * Use this to put a reference after the init.
 */
int hfi1_rcd_put(struct hfi1_ctxtdata *rcd)
{
        if (rcd)
                return kref_put(&rcd->kref, hfi1_rcd_free);

        return 0;
}

/**
 * hfi1_rcd_get - increment reference for rcd
 * @rcd: pointer to an initialized rcd data structure
 *
 * Use this to get a reference after the init.
 */
void hfi1_rcd_get(struct hfi1_ctxtdata *rcd)
{
        kref_get(&rcd->kref);
}

/**
 * allocate_rcd_index - allocate an rcd index from the rcd array
 * @dd: pointer to a valid devdata structure
 * @rcd: rcd data structure to assign
 * @index: pointer to index that is allocated
 *
 * Find an empty index in the rcd array, and assign the given rcd to it.
 * If the array is full, we are EBUSY.
 *
 */
static int allocate_rcd_index(struct hfi1_devdata *dd,
                              struct hfi1_ctxtdata *rcd, u16 *index)
{
        unsigned long flags;
        u16 ctxt;

        spin_lock_irqsave(&dd->uctxt_lock, flags);
        for (ctxt = 0; ctxt < dd->num_rcv_contexts; ctxt++)
                if (!dd->rcd[ctxt])
                        break;

        if (ctxt < dd->num_rcv_contexts) {
                rcd->ctxt = ctxt;
                dd->rcd[ctxt] = rcd;
                hfi1_rcd_init(rcd);
        }
        spin_unlock_irqrestore(&dd->uctxt_lock, flags);

        if (ctxt >= dd->num_rcv_contexts)
                return -EBUSY;

        *index = ctxt;

        return 0;
}

/**
 * hfi1_rcd_get_by_index_safe - validate the ctxt index before accessing the
 * array
 * @dd: pointer to a valid devdata structure
 * @ctxt: the index of an possilbe rcd
 *
 * This is a wrapper for hfi1_rcd_get_by_index() to validate that the given
 * ctxt index is valid.
 *
 * The caller is responsible for making the _put().
 *
 */
struct hfi1_ctxtdata *hfi1_rcd_get_by_index_safe(struct hfi1_devdata *dd,
                                                 u16 ctxt)
{
        if (ctxt < dd->num_rcv_contexts)
                return hfi1_rcd_get_by_index(dd, ctxt);

        return NULL;
}

/**
 * hfi1_rcd_get_by_index
 * @dd: pointer to a valid devdata structure
 * @ctxt: the index of an possilbe rcd
 *
 * We need to protect access to the rcd array.  If access is needed to
 * one or more index, get the protecting spinlock and then increment the
 * kref.
 *
 * The caller is responsible for making the _put().
 *
 */
struct hfi1_ctxtdata *hfi1_rcd_get_by_index(struct hfi1_devdata *dd, u16 ctxt)
{
        unsigned long flags;
        struct hfi1_ctxtdata *rcd = NULL;

        spin_lock_irqsave(&dd->uctxt_lock, flags);
        if (dd->rcd[ctxt]) {
                rcd = dd->rcd[ctxt];
                hfi1_rcd_get(rcd);
        }
        spin_unlock_irqrestore(&dd->uctxt_lock, flags);

        return rcd;
}

/*
 * Common code for user and kernel context create and setup.
 * NOTE: the initial kref is done here (hf1_rcd_init()).
 */
int hfi1_create_ctxtdata(struct hfi1_pportdata *ppd, int numa,
                         struct hfi1_ctxtdata **context)
{
        struct hfi1_devdata *dd = ppd->dd;
        struct hfi1_ctxtdata *rcd;
        unsigned kctxt_ngroups = 0;
        u32 base;

        if (dd->rcv_entries.nctxt_extra >
            dd->num_rcv_contexts - dd->first_dyn_alloc_ctxt)
                kctxt_ngroups = (dd->rcv_entries.nctxt_extra -
                         (dd->num_rcv_contexts - dd->first_dyn_alloc_ctxt));
        rcd = kzalloc_node(sizeof(*rcd), GFP_KERNEL, numa);
        if (rcd) {
                u32 rcvtids, max_entries;
                u16 ctxt;
                int ret;

                ret = allocate_rcd_index(dd, rcd, &ctxt);
                if (ret) {
                        *context = NULL;
                        kfree(rcd);
                        return ret;
                }

                INIT_LIST_HEAD(&rcd->qp_wait_list);
                hfi1_exp_tid_group_init(rcd);
                rcd->ppd = ppd;
                rcd->dd = dd;
                rcd->numa_id = numa;
                rcd->rcv_array_groups = dd->rcv_entries.ngroups;
                rcd->rhf_rcv_function_map = normal_rhf_rcv_functions;

                mutex_init(&rcd->exp_mutex);

                hfi1_cdbg(PROC, "setting up context %u\n", rcd->ctxt);

                /*
                 * Calculate the context's RcvArray entry starting point.
                 * We do this here because we have to take into account all
                 * the RcvArray entries that previous context would have
                 * taken and we have to account for any extra groups assigned
                 * to the static (kernel) or dynamic (vnic/user) contexts.
                 */
                if (ctxt < dd->first_dyn_alloc_ctxt) {
                        if (ctxt < kctxt_ngroups) {
                                base = ctxt * (dd->rcv_entries.ngroups + 1);
                                rcd->rcv_array_groups++;
                        } else {
                                base = kctxt_ngroups +
                                        (ctxt * dd->rcv_entries.ngroups);
                        }
                } else {
                        u16 ct = ctxt - dd->first_dyn_alloc_ctxt;

                        base = ((dd->n_krcv_queues * dd->rcv_entries.ngroups) +
                                kctxt_ngroups);
                        if (ct < dd->rcv_entries.nctxt_extra) {
                                base += ct * (dd->rcv_entries.ngroups + 1);
                                rcd->rcv_array_groups++;
                        } else {
                                base += dd->rcv_entries.nctxt_extra +
                                        (ct * dd->rcv_entries.ngroups);
                        }
                }
                rcd->eager_base = base * dd->rcv_entries.group_size;

                rcd->rcvhdrq_cnt = rcvhdrcnt;
                rcd->rcvhdrqentsize = hfi1_hdrq_entsize;
                rcd->rhf_offset =
                        rcd->rcvhdrqentsize - sizeof(u64) / sizeof(u32);
                /*
                 * Simple Eager buffer allocation: we have already pre-allocated
                 * the number of RcvArray entry groups. Each ctxtdata structure
                 * holds the number of groups for that context.
                 *
                 * To follow CSR requirements and maintain cacheline alignment,
                 * make sure all sizes and bases are multiples of group_size.
                 *
                 * The expected entry count is what is left after assigning
                 * eager.
                 */
                max_entries = rcd->rcv_array_groups *
                        dd->rcv_entries.group_size;
                rcvtids = ((max_entries * hfi1_rcvarr_split) / 100);
                rcd->egrbufs.count = round_down(rcvtids,
                                                dd->rcv_entries.group_size);
                if (rcd->egrbufs.count > MAX_EAGER_ENTRIES) {
                        dd_dev_err(dd, "ctxt%u: requested too many RcvArray entries.\n",
                                   rcd->ctxt);
                        rcd->egrbufs.count = MAX_EAGER_ENTRIES;
                }
                hfi1_cdbg(PROC,
                          "ctxt%u: max Eager buffer RcvArray entries: %u\n",
                          rcd->ctxt, rcd->egrbufs.count);

                /*
                 * Allocate array that will hold the eager buffer accounting
                 * data.
                 * This will allocate the maximum possible buffer count based
                 * on the value of the RcvArray split parameter.
                 * The resulting value will be rounded down to the closest
                 * multiple of dd->rcv_entries.group_size.
                 */
                rcd->egrbufs.buffers =
                        kcalloc_node(rcd->egrbufs.count,
                                     sizeof(*rcd->egrbufs.buffers),
                                     GFP_KERNEL, numa);
                if (!rcd->egrbufs.buffers)
                        goto bail;
                rcd->egrbufs.rcvtids =
                        kcalloc_node(rcd->egrbufs.count,
                                     sizeof(*rcd->egrbufs.rcvtids),
                                     GFP_KERNEL, numa);
                if (!rcd->egrbufs.rcvtids)
                        goto bail;
                rcd->egrbufs.size = eager_buffer_size;
                /*
                 * The size of the buffers programmed into the RcvArray
                 * entries needs to be big enough to handle the highest
                 * MTU supported.
                 */
                if (rcd->egrbufs.size < hfi1_max_mtu) {
                        rcd->egrbufs.size = __roundup_pow_of_two(hfi1_max_mtu);
                        hfi1_cdbg(PROC,
                                  "ctxt%u: eager bufs size too small. Adjusting to %zu\n",
                                    rcd->ctxt, rcd->egrbufs.size);
                }
                rcd->egrbufs.rcvtid_size = HFI1_MAX_EAGER_BUFFER_SIZE;

                /* Applicable only for statically created kernel contexts */
                if (ctxt < dd->first_dyn_alloc_ctxt) {
                        rcd->opstats = kzalloc_node(sizeof(*rcd->opstats),
                                                    GFP_KERNEL, numa);
                        if (!rcd->opstats)
                                goto bail;
                }

                *context = rcd;
                return 0;
        }

bail:
        *context = NULL;
        hfi1_free_ctxt(rcd);
        return -ENOMEM;
}

/**
 * hfi1_free_ctxt
 * @rcd: pointer to an initialized rcd data structure
 *
 * This wrapper is the free function that matches hfi1_create_ctxtdata().
 * When a context is done being used (kernel or user), this function is called
 * for the "final" put to match the kref init from hf1i_create_ctxtdata().
 * Other users of the context do a get/put sequence to make sure that the
 * structure isn't removed while in use.
 */
void hfi1_free_ctxt(struct hfi1_ctxtdata *rcd)
{
        hfi1_rcd_put(rcd);
}

/*
 * Convert a receive header entry size that to the encoding used in the CSR.
 *
 * Return a zero if the given size is invalid.
 */
static inline u64 encode_rcv_header_entry_size(u16 size)
{
        /* there are only 3 valid receive header entry sizes */
        if (size == 2)
                return 1;
        if (size == 16)
                return 2;
        else if (size == 32)
                return 4;
        return 0; /* invalid */
}

/*
 * Select the largest ccti value over all SLs to determine the intra-
 * packet gap for the link.
 *
 * called with cca_timer_lock held (to protect access to cca_timer
 * array), and rcu_read_lock() (to protect access to cc_state).
 */
void set_link_ipg(struct hfi1_pportdata *ppd)
{
        struct hfi1_devdata *dd = ppd->dd;
        struct cc_state *cc_state;
        int i;
        u16 cce, ccti_limit, max_ccti = 0;
        u16 shift, mult;
        u64 src;
        u32 current_egress_rate; /* Mbits /sec */
        u32 max_pkt_time;
        /*
         * max_pkt_time is the maximum packet egress time in units
         * of the fabric clock period 1/(805 MHz).
         */

        cc_state = get_cc_state(ppd);

        if (!cc_state)
                /*
                 * This should _never_ happen - rcu_read_lock() is held,
                 * and set_link_ipg() should not be called if cc_state
                 * is NULL.
                 */
                return;

        for (i = 0; i < OPA_MAX_SLS; i++) {
                u16 ccti = ppd->cca_timer[i].ccti;

                if (ccti > max_ccti)
                        max_ccti = ccti;
        }

        ccti_limit = cc_state->cct.ccti_limit;
        if (max_ccti > ccti_limit)
                max_ccti = ccti_limit;

        cce = cc_state->cct.entries[max_ccti].entry;
        shift = (cce & 0xc000) >> 14;
        mult = (cce & 0x3fff);

        current_egress_rate = active_egress_rate(ppd);

        max_pkt_time = egress_cycles(ppd->ibmaxlen, current_egress_rate);

        src = (max_pkt_time >> shift) * mult;

        src &= SEND_STATIC_RATE_CONTROL_CSR_SRC_RELOAD_SMASK;
        src <<= SEND_STATIC_RATE_CONTROL_CSR_SRC_RELOAD_SHIFT;

        write_csr(dd, SEND_STATIC_RATE_CONTROL, src);
}

static enum hrtimer_restart cca_timer_fn(struct hrtimer *t)
{
        struct cca_timer *cca_timer;
        struct hfi1_pportdata *ppd;
        int sl;
        u16 ccti_timer, ccti_min;
        struct cc_state *cc_state;
        unsigned long flags;
        enum hrtimer_restart ret = HRTIMER_NORESTART;

        cca_timer = container_of(t, struct cca_timer, hrtimer);
        ppd = cca_timer->ppd;
        sl = cca_timer->sl;

        rcu_read_lock();

        cc_state = get_cc_state(ppd);

        if (!cc_state) {
                rcu_read_unlock();
                return HRTIMER_NORESTART;
        }

        /*
         * 1) decrement ccti for SL
         * 2) calculate IPG for link (set_link_ipg())
         * 3) restart timer, unless ccti is at min value
         */

        ccti_min = cc_state->cong_setting.entries[sl].ccti_min;
        ccti_timer = cc_state->cong_setting.entries[sl].ccti_timer;

        spin_lock_irqsave(&ppd->cca_timer_lock, flags);

        if (cca_timer->ccti > ccti_min) {
                cca_timer->ccti--;
                set_link_ipg(ppd);
        }

        if (cca_timer->ccti > ccti_min) {
                unsigned long nsec = 1024 * ccti_timer;
                /* ccti_timer is in units of 1.024 usec */
                hrtimer_forward_now(t, ns_to_ktime(nsec));
                ret = HRTIMER_RESTART;
        }

        spin_unlock_irqrestore(&ppd->cca_timer_lock, flags);
        rcu_read_unlock();
        return ret;
}

/*
 * Common code for initializing the physical port structure.
 */
void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd,
                         struct hfi1_devdata *dd, u8 hw_pidx, u8 port)
{
        int i;
        uint default_pkey_idx;
        struct cc_state *cc_state;

        ppd->dd = dd;
        ppd->hw_pidx = hw_pidx;
        ppd->port = port; /* IB port number, not index */
        ppd->prev_link_width = LINK_WIDTH_DEFAULT;
        /*
         * There are C_VL_COUNT number of PortVLXmitWait counters.
         * Adding 1 to C_VL_COUNT to include the PortXmitWait counter.
         */
        for (i = 0; i < C_VL_COUNT + 1; i++) {
                ppd->port_vl_xmit_wait_last[i] = 0;
                ppd->vl_xmit_flit_cnt[i] = 0;
        }

        default_pkey_idx = 1;

        ppd->pkeys[default_pkey_idx] = DEFAULT_P_KEY;
        ppd->part_enforce |= HFI1_PART_ENFORCE_IN;

        if (loopback) {
                dd_dev_err(dd, "Faking data partition 0x8001 in idx %u\n",
                           !default_pkey_idx);
                ppd->pkeys[!default_pkey_idx] = 0x8001;
        }

        INIT_WORK(&ppd->link_vc_work, handle_verify_cap);
        INIT_WORK(&ppd->link_up_work, handle_link_up);
        INIT_WORK(&ppd->link_down_work, handle_link_down);
        INIT_WORK(&ppd->freeze_work, handle_freeze);
        INIT_WORK(&ppd->link_downgrade_work, handle_link_downgrade);
        INIT_WORK(&ppd->sma_message_work, handle_sma_message);
        INIT_WORK(&ppd->link_bounce_work, handle_link_bounce);
        INIT_DELAYED_WORK(&ppd->start_link_work, handle_start_link);
        INIT_WORK(&ppd->linkstate_active_work, receive_interrupt_work);
        INIT_WORK(&ppd->qsfp_info.qsfp_work, qsfp_event);

        mutex_init(&ppd->hls_lock);
        spin_lock_init(&ppd->qsfp_info.qsfp_lock);

        ppd->qsfp_info.ppd = ppd;
        ppd->sm_trap_qp = 0x0;
        ppd->sa_qp = 0x1;

        ppd->hfi1_wq = NULL;

        spin_lock_init(&ppd->cca_timer_lock);

        for (i = 0; i < OPA_MAX_SLS; i++) {
                hrtimer_init(&ppd->cca_timer[i].hrtimer, CLOCK_MONOTONIC,
                             HRTIMER_MODE_REL);
                ppd->cca_timer[i].ppd = ppd;
                ppd->cca_timer[i].sl = i;
                ppd->cca_timer[i].ccti = 0;
                ppd->cca_timer[i].hrtimer.function = cca_timer_fn;
        }

        ppd->cc_max_table_entries = IB_CC_TABLE_CAP_DEFAULT;

        spin_lock_init(&ppd->cc_state_lock);
        spin_lock_init(&ppd->cc_log_lock);
        cc_state = kzalloc(sizeof(*cc_state), GFP_KERNEL);
        RCU_INIT_POINTER(ppd->cc_state, cc_state);
        if (!cc_state)
                goto bail;
        return;

bail:
        dd_dev_err(dd, "Congestion Control Agent disabled for port %d\n", port);
}

/*
 * Do initialization for device that is only needed on
 * first detect, not on resets.
 */
static int loadtime_init(struct hfi1_devdata *dd)
{
        return 0;
}

/**
 * init_after_reset - re-initialize after a reset
 * @dd: the hfi1_ib device
 *
 * sanity check at least some of the values after reset, and
 * ensure no receive or transmit (explicitly, in case reset
 * failed
 */
static int init_after_reset(struct hfi1_devdata *dd)
{
        int i;
        struct hfi1_ctxtdata *rcd;
        /*
         * Ensure chip does no sends or receives, tail updates, or
         * pioavail updates while we re-initialize.  This is mostly
         * for the driver data structures, not chip registers.
         */
        for (i = 0; i < dd->num_rcv_contexts; i++) {
                rcd = hfi1_rcd_get_by_index(dd, i);
                hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_DIS |
                             HFI1_RCVCTRL_INTRAVAIL_DIS |
                             HFI1_RCVCTRL_TAILUPD_DIS, rcd);
                hfi1_rcd_put(rcd);
        }
        pio_send_control(dd, PSC_GLOBAL_DISABLE);
        for (i = 0; i < dd->num_send_contexts; i++)
                sc_disable(dd->send_contexts[i].sc);

        return 0;
}

static void enable_chip(struct hfi1_devdata *dd)
{
        struct hfi1_ctxtdata *rcd;
        u32 rcvmask;
        u16 i;

        /* enable PIO send */
        pio_send_control(dd, PSC_GLOBAL_ENABLE);

        /*
         * Enable kernel ctxts' receive and receive interrupt.
         * Other ctxts done as user opens and initializes them.
         */
        for (i = 0; i < dd->first_dyn_alloc_ctxt; ++i) {
                rcd = hfi1_rcd_get_by_index(dd, i);
                if (!rcd)
                        continue;
                rcvmask = HFI1_RCVCTRL_CTXT_ENB | HFI1_RCVCTRL_INTRAVAIL_ENB;
                rcvmask |= HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL) ?
                        HFI1_RCVCTRL_TAILUPD_ENB : HFI1_RCVCTRL_TAILUPD_DIS;
                if (!HFI1_CAP_KGET_MASK(rcd->flags, MULTI_PKT_EGR))
                        rcvmask |= HFI1_RCVCTRL_ONE_PKT_EGR_ENB;
                if (HFI1_CAP_KGET_MASK(rcd->flags, NODROP_RHQ_FULL))
                        rcvmask |= HFI1_RCVCTRL_NO_RHQ_DROP_ENB;
                if (HFI1_CAP_KGET_MASK(rcd->flags, NODROP_EGR_FULL))
                        rcvmask |= HFI1_RCVCTRL_NO_EGR_DROP_ENB;
                hfi1_rcvctrl(dd, rcvmask, rcd);
                sc_enable(rcd->sc);
                hfi1_rcd_put(rcd);
        }
}

/**
 * create_workqueues - create per port workqueues
 * @dd: the hfi1_ib device
 */
static int create_workqueues(struct hfi1_devdata *dd)
{
        int pidx;
        struct hfi1_pportdata *ppd;

        for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                ppd = dd->pport + pidx;
                if (!ppd->hfi1_wq) {
                        ppd->hfi1_wq =
                                alloc_workqueue(
                                    "hfi%d_%d",
                                    WQ_SYSFS | WQ_HIGHPRI | WQ_CPU_INTENSIVE,
                                    HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES,
                                    dd->unit, pidx);
                        if (!ppd->hfi1_wq)
                                goto wq_error;
                }
                if (!ppd->link_wq) {
                        /*
                         * Make the link workqueue single-threaded to enforce
                         * serialization.
                         */
                        ppd->link_wq =
                                alloc_workqueue(
                                    "hfi_link_%d_%d",
                                    WQ_SYSFS | WQ_MEM_RECLAIM | WQ_UNBOUND,
                                    1, /* max_active */
                                    dd->unit, pidx);
                        if (!ppd->link_wq)
                                goto wq_error;
                }
        }
        return 0;
wq_error:
        pr_err("alloc_workqueue failed for port %d\n", pidx + 1);
        for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                ppd = dd->pport + pidx;
                if (ppd->hfi1_wq) {
                        destroy_workqueue(ppd->hfi1_wq);
                        ppd->hfi1_wq = NULL;
                }
                if (ppd->link_wq) {
                        destroy_workqueue(ppd->link_wq);
                        ppd->link_wq = NULL;
                }
        }
        return -ENOMEM;
}

/**
 * enable_general_intr() - Enable the IRQs that will be handled by the
 * general interrupt handler.
 * @dd: valid devdata
 *
 */
static void enable_general_intr(struct hfi1_devdata *dd)
{
        set_intr_bits(dd, CCE_ERR_INT, MISC_ERR_INT, true);
        set_intr_bits(dd, PIO_ERR_INT, TXE_ERR_INT, true);
        set_intr_bits(dd, IS_SENDCTXT_ERR_START, IS_SENDCTXT_ERR_END, true);
        set_intr_bits(dd, PBC_INT, GPIO_ASSERT_INT, true);
        set_intr_bits(dd, TCRIT_INT, TCRIT_INT, true);
        set_intr_bits(dd, IS_DC_START, IS_DC_END, true);
        set_intr_bits(dd, IS_SENDCREDIT_START, IS_SENDCREDIT_END, true);
}

/**
 * hfi1_init - do the actual initialization sequence on the chip
 * @dd: the hfi1_ib device
 * @reinit: re-initializing, so don't allocate new memory
 *
 * Do the actual initialization sequence on the chip.  This is done
 * both from the init routine called from the PCI infrastructure, and
 * when we reset the chip, or detect that it was reset internally,
 * or it's administratively re-enabled.
 *
 * Memory allocation here and in called routines is only done in
 * the first case (reinit == 0).  We have to be careful, because even
 * without memory allocation, we need to re-write all the chip registers
 * TIDs, etc. after the reset or enable has completed.
 */
int hfi1_init(struct hfi1_devdata *dd, int reinit)
{
        int ret = 0, pidx, lastfail = 0;
        unsigned long len;
        u16 i;
        struct hfi1_ctxtdata *rcd;
        struct hfi1_pportdata *ppd;

        /* Set up send low level handlers */
        dd->process_pio_send = hfi1_verbs_send_pio;
        dd->process_dma_send = hfi1_verbs_send_dma;
        dd->pio_inline_send = pio_copy;
        dd->process_vnic_dma_send = hfi1_vnic_send_dma;

        if (is_ax(dd)) {
                atomic_set(&dd->drop_packet, DROP_PACKET_ON);
                dd->do_drop = 1;
        } else {
                atomic_set(&dd->drop_packet, DROP_PACKET_OFF);
                dd->do_drop = 0;
        }

        /* make sure the link is not "up" */
        for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                ppd = dd->pport + pidx;
                ppd->linkup = 0;
        }

        if (reinit)
                ret = init_after_reset(dd);
        else
                ret = loadtime_init(dd);
        if (ret)
                goto done;

        /* allocate dummy tail memory for all receive contexts */
        dd->rcvhdrtail_dummy_kvaddr = dma_alloc_coherent(&dd->pcidev->dev,
                                                         sizeof(u64),
                                                         &dd->rcvhdrtail_dummy_dma,
                                                         GFP_KERNEL);

        if (!dd->rcvhdrtail_dummy_kvaddr) {
                dd_dev_err(dd, "cannot allocate dummy tail memory\n");
                ret = -ENOMEM;
                goto done;
        }

        /* dd->rcd can be NULL if early initialization failed */
        for (i = 0; dd->rcd && i < dd->first_dyn_alloc_ctxt; ++i) {
                /*
                 * Set up the (kernel) rcvhdr queue and egr TIDs.  If doing
                 * re-init, the simplest way to handle this is to free
                 * existing, and re-allocate.
                 * Need to re-create rest of ctxt 0 ctxtdata as well.
                 */
                rcd = hfi1_rcd_get_by_index(dd, i);
                if (!rcd)
                        continue;

                rcd->do_interrupt = &handle_receive_interrupt;

                lastfail = hfi1_create_rcvhdrq(dd, rcd);
                if (!lastfail)
                        lastfail = hfi1_setup_eagerbufs(rcd);
                if (lastfail) {
                        dd_dev_err(dd,
                                   "failed to allocate kernel ctxt's rcvhdrq and/or egr bufs\n");
                        ret = lastfail;
                }
                /* enable IRQ */
                hfi1_rcd_put(rcd);
        }

        /* Allocate enough memory for user event notification. */
        len = PAGE_ALIGN(chip_rcv_contexts(dd) * HFI1_MAX_SHARED_CTXTS *
                         sizeof(*dd->events));
        dd->events = vmalloc_user(len);
        if (!dd->events)
                dd_dev_err(dd, "Failed to allocate user events page\n");
        /*
         * Allocate a page for device and port status.
         * Page will be shared amongst all user processes.
         */
        dd->status = vmalloc_user(PAGE_SIZE);
        if (!dd->status)
                dd_dev_err(dd, "Failed to allocate dev status page\n");
        for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                ppd = dd->pport + pidx;
                if (dd->status)
                        /* Currently, we only have one port */
                        ppd->statusp = &dd->status->port;

                set_mtu(ppd);
        }

        /* enable chip even if we have an error, so we can debug cause */
        enable_chip(dd);

done:
        /*
         * Set status even if port serdes is not initialized
         * so that diags will work.
         */
        if (dd->status)
                dd->status->dev |= HFI1_STATUS_CHIP_PRESENT |
                        HFI1_STATUS_INITTED;
        if (!ret) {
                /* enable all interrupts from the chip */
                enable_general_intr(dd);
                init_qsfp_int(dd);

                /* chip is OK for user apps; mark it as initialized */
                for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                        ppd = dd->pport + pidx;

                        /*
                         * start the serdes - must be after interrupts are
                         * enabled so we are notified when the link goes up
                         */
                        lastfail = bringup_serdes(ppd);
                        if (lastfail)
                                dd_dev_info(dd,
                                            "Failed to bring up port %u\n",
                                            ppd->port);

                        /*
                         * Set status even if port serdes is not initialized
                         * so that diags will work.
                         */
                        if (ppd->statusp)
                                *ppd->statusp |= HFI1_STATUS_CHIP_PRESENT |
                                                        HFI1_STATUS_INITTED;
                        if (!ppd->link_speed_enabled)
                                continue;
                }
        }

        /* if ret is non-zero, we probably should do some cleanup here... */
        return ret;
}

static inline struct hfi1_devdata *__hfi1_lookup(int unit)
{
        return idr_find(&hfi1_unit_table, unit);
}

struct hfi1_devdata *hfi1_lookup(int unit)
{
        struct hfi1_devdata *dd;
        unsigned long flags;

        spin_lock_irqsave(&hfi1_devs_lock, flags);
        dd = __hfi1_lookup(unit);
        spin_unlock_irqrestore(&hfi1_devs_lock, flags);

        return dd;
}

/*
 * Stop the timers during unit shutdown, or after an error late
 * in initialization.
 */
static void stop_timers(struct hfi1_devdata *dd)
{
        struct hfi1_pportdata *ppd;
        int pidx;

        for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                ppd = dd->pport + pidx;
                if (ppd->led_override_timer.function) {
                        del_timer_sync(&ppd->led_override_timer);
                        atomic_set(&ppd->led_override_timer_active, 0);
                }
        }
}

/**
 * shutdown_device - shut down a device
 * @dd: the hfi1_ib device
 *
 * This is called to make the device quiet when we are about to
 * unload the driver, and also when the device is administratively
 * disabled.   It does not free any data structures.
 * Everything it does has to be setup again by hfi1_init(dd, 1)
 */
static void shutdown_device(struct hfi1_devdata *dd)
{
        struct hfi1_pportdata *ppd;
        struct hfi1_ctxtdata *rcd;
        unsigned pidx;
        int i;

        if (dd->flags & HFI1_SHUTDOWN)
                return;
        dd->flags |= HFI1_SHUTDOWN;

        for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                ppd = dd->pport + pidx;

                ppd->linkup = 0;
                if (ppd->statusp)
                        *ppd->statusp &= ~(HFI1_STATUS_IB_CONF |
                                           HFI1_STATUS_IB_READY);
        }
        dd->flags &= ~HFI1_INITTED;

        /* mask and clean up interrupts */
        set_intr_bits(dd, IS_FIRST_SOURCE, IS_LAST_SOURCE, false);
        msix_clean_up_interrupts(dd);

        for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                ppd = dd->pport + pidx;
                for (i = 0; i < dd->num_rcv_contexts; i++) {
                        rcd = hfi1_rcd_get_by_index(dd, i);
                        hfi1_rcvctrl(dd, HFI1_RCVCTRL_TAILUPD_DIS |
                                     HFI1_RCVCTRL_CTXT_DIS |
                                     HFI1_RCVCTRL_INTRAVAIL_DIS |
                                     HFI1_RCVCTRL_PKEY_DIS |
                                     HFI1_RCVCTRL_ONE_PKT_EGR_DIS, rcd);
                        hfi1_rcd_put(rcd);
                }
                /*
                 * Gracefully stop all sends allowing any in progress to
                 * trickle out first.
                 */
                for (i = 0; i < dd->num_send_contexts; i++)
                        sc_flush(dd->send_contexts[i].sc);
        }

        /*
         * Enough for anything that's going to trickle out to have actually
         * done so.
         */
        udelay(20);

        for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                ppd = dd->pport + pidx;

                /* disable all contexts */
                for (i = 0; i < dd->num_send_contexts; i++)
                        sc_disable(dd->send_contexts[i].sc);
                /* disable the send device */
                pio_send_control(dd, PSC_GLOBAL_DISABLE);

                shutdown_led_override(ppd);

                /*
                 * Clear SerdesEnable.
                 * We can't count on interrupts since we are stopping.
                 */
                hfi1_quiet_serdes(ppd);

                if (ppd->hfi1_wq) {
                        destroy_workqueue(ppd->hfi1_wq);
                        ppd->hfi1_wq = NULL;
                }
                if (ppd->link_wq) {
                        destroy_workqueue(ppd->link_wq);
                        ppd->link_wq = NULL;
                }
        }
        sdma_exit(dd);
}

/**
 * hfi1_free_ctxtdata - free a context's allocated data
 * @dd: the hfi1_ib device
 * @rcd: the ctxtdata structure
 *
 * free up any allocated data for a context
 * It should never change any chip state, or global driver state.
 */
void hfi1_free_ctxtdata(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd)
{
        u32 e;

        if (!rcd)
                return;

        if (rcd->rcvhdrq) {
                dma_free_coherent(&dd->pcidev->dev, rcvhdrq_size(rcd),
                                  rcd->rcvhdrq, rcd->rcvhdrq_dma);
                rcd->rcvhdrq = NULL;
                if (rcd->rcvhdrtail_kvaddr) {
                        dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
                                          (void *)rcd->rcvhdrtail_kvaddr,
                                          rcd->rcvhdrqtailaddr_dma);
                        rcd->rcvhdrtail_kvaddr = NULL;
                }
        }

        /* all the RcvArray entries should have been cleared by now */
        kfree(rcd->egrbufs.rcvtids);
        rcd->egrbufs.rcvtids = NULL;

        for (e = 0; e < rcd->egrbufs.alloced; e++) {
                if (rcd->egrbufs.buffers[e].dma)
                        dma_free_coherent(&dd->pcidev->dev,
                                          rcd->egrbufs.buffers[e].len,
                                          rcd->egrbufs.buffers[e].addr,
                                          rcd->egrbufs.buffers[e].dma);
        }
        kfree(rcd->egrbufs.buffers);
        rcd->egrbufs.alloced = 0;
        rcd->egrbufs.buffers = NULL;

        sc_free(rcd->sc);
        rcd->sc = NULL;

        vfree(rcd->subctxt_uregbase);
        vfree(rcd->subctxt_rcvegrbuf);
        vfree(rcd->subctxt_rcvhdr_base);
        kfree(rcd->opstats);

        rcd->subctxt_uregbase = NULL;
        rcd->subctxt_rcvegrbuf = NULL;
        rcd->subctxt_rcvhdr_base = NULL;
        rcd->opstats = NULL;
}

/*
 * Release our hold on the shared asic data.  If we are the last one,
 * return the structure to be finalized outside the lock.  Must be
 * holding hfi1_devs_lock.
 */
static struct hfi1_asic_data *release_asic_data(struct hfi1_devdata *dd)
{
        struct hfi1_asic_data *ad;
        int other;

        if (!dd->asic_data)
                return NULL;
        dd->asic_data->dds[dd->hfi1_id] = NULL;
        other = dd->hfi1_id ? 0 : 1;
        ad = dd->asic_data;
        dd->asic_data = NULL;
        /* return NULL if the other dd still has a link */
        return ad->dds[other] ? NULL : ad;
}

static void finalize_asic_data(struct hfi1_devdata *dd,
                               struct hfi1_asic_data *ad)
{
        clean_up_i2c(dd, ad);
        kfree(ad);
}

/**
 * hfi1_clean_devdata - cleans up per-unit data structure
 * @dd: pointer to a valid devdata structure
 *
 * It cleans up all data structures set up by
 * by hfi1_alloc_devdata().
 */
static void hfi1_clean_devdata(struct hfi1_devdata *dd)
{
        struct hfi1_asic_data *ad;
        unsigned long flags;

        spin_lock_irqsave(&hfi1_devs_lock, flags);
        if (!list_empty(&dd->list)) {
                idr_remove(&hfi1_unit_table, dd->unit);
                list_del_init(&dd->list);
        }
        ad = release_asic_data(dd);
        spin_unlock_irqrestore(&hfi1_devs_lock, flags);

        finalize_asic_data(dd, ad);
        free_platform_config(dd);
        rcu_barrier(); /* wait for rcu callbacks to complete */
        free_percpu(dd->int_counter);
        free_percpu(dd->rcv_limit);
        free_percpu(dd->send_schedule);
        free_percpu(dd->tx_opstats);
        dd->int_counter   = NULL;
        dd->rcv_limit     = NULL;
        dd->send_schedule = NULL;
        dd->tx_opstats    = NULL;
        kfree(dd->comp_vect);
        dd->comp_vect = NULL;
        sdma_clean(dd, dd->num_sdma);
        rvt_dealloc_device(&dd->verbs_dev.rdi);
}

static void __hfi1_free_devdata(struct kobject *kobj)
{
        struct hfi1_devdata *dd =
                container_of(kobj, struct hfi1_devdata, kobj);

        hfi1_clean_devdata(dd);
}

static struct kobj_type hfi1_devdata_type = {
        .release = __hfi1_free_devdata,
};

void hfi1_free_devdata(struct hfi1_devdata *dd)
{
        kobject_put(&dd->kobj);
}

/**
 * hfi1_alloc_devdata - Allocate our primary per-unit data structure.
 * @pdev: Valid PCI device
 * @extra: How many bytes to alloc past the default
 *
 * Must be done via verbs allocator, because the verbs cleanup process
 * both does cleanup and free of the data structure.
 * "extra" is for chip-specific data.
 *
 * Use the idr mechanism to get a unit number for this unit.
 */
static struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev,
                                               size_t extra)
{
        unsigned long flags;
        struct hfi1_devdata *dd;
        int ret, nports;

        /* extra is * number of ports */
        nports = extra / sizeof(struct hfi1_pportdata);

        dd = (struct hfi1_devdata *)rvt_alloc_device(sizeof(*dd) + extra,
                                                     nports);
        if (!dd)
                return ERR_PTR(-ENOMEM);
        dd->num_pports = nports;
        dd->pport = (struct hfi1_pportdata *)(dd + 1);
        dd->pcidev = pdev;
        pci_set_drvdata(pdev, dd);

        INIT_LIST_HEAD(&dd->list);
        idr_preload(GFP_KERNEL);
        spin_lock_irqsave(&hfi1_devs_lock, flags);

        ret = idr_alloc(&hfi1_unit_table, dd, 0, 0, GFP_NOWAIT);
        if (ret >= 0) {
                dd->unit = ret;
                list_add(&dd->list, &hfi1_dev_list);
        }
        dd->node = -1;

        spin_unlock_irqrestore(&hfi1_devs_lock, flags);
        idr_preload_end();

        if (ret < 0) {
                dev_err(&pdev->dev,
                        "Could not allocate unit ID: error %d\n", -ret);
                goto bail;
        }
        rvt_set_ibdev_name(&dd->verbs_dev.rdi, "%s_%d", class_name(), dd->unit);

        /*
         * Initialize all locks for the device. This needs to be as early as
         * possible so locks are usable.
         */
        spin_lock_init(&dd->sc_lock);
        spin_lock_init(&dd->sendctrl_lock);
        spin_lock_init(&dd->rcvctrl_lock);
        spin_lock_init(&dd->uctxt_lock);
        spin_lock_init(&dd->hfi1_diag_trans_lock);
        spin_lock_init(&dd->sc_init_lock);
        spin_lock_init(&dd->dc8051_memlock);
        seqlock_init(&dd->sc2vl_lock);
        spin_lock_init(&dd->sde_map_lock);
        spin_lock_init(&dd->pio_map_lock);
        mutex_init(&dd->dc8051_lock);
        init_waitqueue_head(&dd->event_queue);
        spin_lock_init(&dd->irq_src_lock);

        dd->int_counter = alloc_percpu(u64);
        if (!dd->int_counter) {
                ret = -ENOMEM;
                goto bail;
        }

        dd->rcv_limit = alloc_percpu(u64);
        if (!dd->rcv_limit) {
                ret = -ENOMEM;
                goto bail;
        }

        dd->send_schedule = alloc_percpu(u64);
        if (!dd->send_schedule) {
                ret = -ENOMEM;
                goto bail;
        }

        dd->tx_opstats = alloc_percpu(struct hfi1_opcode_stats_perctx);
        if (!dd->tx_opstats) {
                ret = -ENOMEM;
                goto bail;
        }

        dd->comp_vect = kzalloc(sizeof(*dd->comp_vect), GFP_KERNEL);
        if (!dd->comp_vect) {
                ret = -ENOMEM;
                goto bail;
        }

        kobject_init(&dd->kobj, &hfi1_devdata_type);
        return dd;

bail:
        hfi1_clean_devdata(dd);
        return ERR_PTR(ret);
}

/*
 * Called from freeze mode handlers, and from PCI error
 * reporting code.  Should be paranoid about state of
 * system and data structures.
 */
void hfi1_disable_after_error(struct hfi1_devdata *dd)
{
        if (dd->flags & HFI1_INITTED) {
                u32 pidx;

                dd->flags &= ~HFI1_INITTED;
                if (dd->pport)
                        for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                                struct hfi1_pportdata *ppd;

                                ppd = dd->pport + pidx;
                                if (dd->flags & HFI1_PRESENT)
                                        set_link_state(ppd, HLS_DN_DISABLE);

                                if (ppd->statusp)
                                        *ppd->statusp &= ~HFI1_STATUS_IB_READY;
                        }
        }

        /*
         * Mark as having had an error for driver, and also
         * for /sys and status word mapped to user programs.
         * This marks unit as not usable, until reset.
         */
        if (dd->status)
                dd->status->dev |= HFI1_STATUS_HWERROR;
}

static void remove_one(struct pci_dev *);
static int init_one(struct pci_dev *, const struct pci_device_id *);
static void shutdown_one(struct pci_dev *);

#define DRIVER_LOAD_MSG "Intel " DRIVER_NAME " loaded: "
#define PFX DRIVER_NAME ": "

const struct pci_device_id hfi1_pci_tbl[] = {
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL0) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL1) },
        { 0, }
};

MODULE_DEVICE_TABLE(pci, hfi1_pci_tbl);

static struct pci_driver hfi1_pci_driver = {
        .name = DRIVER_NAME,
        .probe = init_one,
        .remove = remove_one,
        .shutdown = shutdown_one,
        .id_table = hfi1_pci_tbl,
        .err_handler = &hfi1_pci_err_handler,
};

static void __init compute_krcvqs(void)
{
        int i;

        for (i = 0; i < krcvqsset; i++)
                n_krcvqs += krcvqs[i];
}

/*
 * Do all the generic driver unit- and chip-independent memory
 * allocation and initialization.
 */
static int __init hfi1_mod_init(void)
{
        int ret;

        ret = dev_init();
        if (ret)
                goto bail;

        ret = node_affinity_init();
        if (ret)
                goto bail;

        /* validate max MTU before any devices start */
        if (!valid_opa_max_mtu(hfi1_max_mtu)) {
                pr_err("Invalid max_mtu 0x%x, using 0x%x instead\n",
                       hfi1_max_mtu, HFI1_DEFAULT_MAX_MTU);
                hfi1_max_mtu = HFI1_DEFAULT_MAX_MTU;
        }
        /* valid CUs run from 1-128 in powers of 2 */
        if (hfi1_cu > 128 || !is_power_of_2(hfi1_cu))
                hfi1_cu = 1;
        /* valid credit return threshold is 0-100, variable is unsigned */
        if (user_credit_return_threshold > 100)
                user_credit_return_threshold = 100;

        compute_krcvqs();
        /*
         * sanitize receive interrupt count, time must wait until after
         * the hardware type is known
         */
        if (rcv_intr_count > RCV_HDR_HEAD_COUNTER_MASK)
                rcv_intr_count = RCV_HDR_HEAD_COUNTER_MASK;
        /* reject invalid combinations */
        if (rcv_intr_count == 0 && rcv_intr_timeout == 0) {
                pr_err("Invalid mode: both receive interrupt count and available timeout are zero - setting interrupt count to 1\n");
                rcv_intr_count = 1;
        }
        if (rcv_intr_count > 1 && rcv_intr_timeout == 0) {
                /*
                 * Avoid indefinite packet delivery by requiring a timeout
                 * if count is > 1.
                 */
                pr_err("Invalid mode: receive interrupt count greater than 1 and available timeout is zero - setting available timeout to 1\n");
                rcv_intr_timeout = 1;
        }
        if (rcv_intr_dynamic && !(rcv_intr_count > 1 && rcv_intr_timeout > 0)) {
                /*
                 * The dynamic algorithm expects a non-zero timeout
                 * and a count > 1.
                 */
                pr_err("Invalid mode: dynamic receive interrupt mitigation with invalid count and timeout - turning dynamic off\n");
                rcv_intr_dynamic = 0;
        }

        /* sanitize link CRC options */
        link_crc_mask &= SUPPORTED_CRCS;

        /*
         * These must be called before the driver is registered with
         * the PCI subsystem.
         */
        idr_init(&hfi1_unit_table);

        hfi1_dbg_init();
        ret = pci_register_driver(&hfi1_pci_driver);
        if (ret < 0) {
                pr_err("Unable to register driver: error %d\n", -ret);
                goto bail_dev;
        }
        goto bail; /* all OK */

bail_dev:
        hfi1_dbg_exit();
        idr_destroy(&hfi1_unit_table);
        dev_cleanup();
bail:
        return ret;
}

module_init(hfi1_mod_init);

/*
 * Do the non-unit driver cleanup, memory free, etc. at unload.
 */
static void __exit hfi1_mod_cleanup(void)
{
        pci_unregister_driver(&hfi1_pci_driver);
        node_affinity_destroy_all();
        hfi1_dbg_exit();

        idr_destroy(&hfi1_unit_table);
        dispose_firmware();     /* asymmetric with obtain_firmware() */
        dev_cleanup();
}

module_exit(hfi1_mod_cleanup);

/* this can only be called after a successful initialization */
static void cleanup_device_data(struct hfi1_devdata *dd)
{
        int ctxt;
        int pidx;

        /* users can't do anything more with chip */
        for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                struct hfi1_pportdata *ppd = &dd->pport[pidx];
                struct cc_state *cc_state;
                int i;

                if (ppd->statusp)
                        *ppd->statusp &= ~HFI1_STATUS_CHIP_PRESENT;

                for (i = 0; i < OPA_MAX_SLS; i++)
                        hrtimer_cancel(&ppd->cca_timer[i].hrtimer);

                spin_lock(&ppd->cc_state_lock);
                cc_state = get_cc_state_protected(ppd);
                RCU_INIT_POINTER(ppd->cc_state, NULL);
                spin_unlock(&ppd->cc_state_lock);

                if (cc_state)
                        kfree_rcu(cc_state, rcu);
        }

        free_credit_return(dd);

        if (dd->rcvhdrtail_dummy_kvaddr) {
                dma_free_coherent(&dd->pcidev->dev, sizeof(u64),
                                  (void *)dd->rcvhdrtail_dummy_kvaddr,
                                  dd->rcvhdrtail_dummy_dma);
                dd->rcvhdrtail_dummy_kvaddr = NULL;
        }

        /*
         * Free any resources still in use (usually just kernel contexts)
         * at unload; we do for ctxtcnt, because that's what we allocate.
         */
        for (ctxt = 0; dd->rcd && ctxt < dd->num_rcv_contexts; ctxt++) {
                struct hfi1_ctxtdata *rcd = dd->rcd[ctxt];

                if (rcd) {
                        hfi1_clear_tids(rcd);
                        hfi1_free_ctxt(rcd);
                }
        }

        kfree(dd->rcd);
        dd->rcd = NULL;

        free_pio_map(dd);
        /* must follow rcv context free - need to remove rcv's hooks */
        for (ctxt = 0; ctxt < dd->num_send_contexts; ctxt++)
                sc_free(dd->send_contexts[ctxt].sc);
        dd->num_send_contexts = 0;
        kfree(dd->send_contexts);
        dd->send_contexts = NULL;
        kfree(dd->hw_to_sw);
        dd->hw_to_sw = NULL;
        kfree(dd->boardname);
        vfree(dd->events);
        vfree(dd->status);
}

/*
 * Clean up on unit shutdown, or error during unit load after
 * successful initialization.
 */
static void postinit_cleanup(struct hfi1_devdata *dd)
{
        hfi1_start_cleanup(dd);
        hfi1_comp_vectors_clean_up(dd);
        hfi1_dev_affinity_clean_up(dd);

        hfi1_pcie_ddcleanup(dd);
        hfi1_pcie_cleanup(dd->pcidev);

        cleanup_device_data(dd);

        hfi1_free_devdata(dd);
}

static int init_validate_rcvhdrcnt(struct hfi1_devdata *dd, uint thecnt)
{
        if (thecnt <= HFI1_MIN_HDRQ_EGRBUF_CNT) {
                dd_dev_err(dd, "Receive header queue count too small\n");
                return -EINVAL;
        }

        if (thecnt > HFI1_MAX_HDRQ_EGRBUF_CNT) {
                dd_dev_err(dd,
                           "Receive header queue count cannot be greater than %u\n",
                           HFI1_MAX_HDRQ_EGRBUF_CNT);
                return -EINVAL;
        }

        if (thecnt % HDRQ_INCREMENT) {
                dd_dev_err(dd, "Receive header queue count %d must be divisible by %lu\n",
                           thecnt, HDRQ_INCREMENT);
                return -EINVAL;
        }

        return 0;
}

static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
        int ret = 0, j, pidx, initfail;
        struct hfi1_devdata *dd;
        struct hfi1_pportdata *ppd;

        /* First, lock the non-writable module parameters */
        HFI1_CAP_LOCK();

        /* Validate dev ids */
        if (!(ent->device == PCI_DEVICE_ID_INTEL0 ||
              ent->device == PCI_DEVICE_ID_INTEL1)) {
                dev_err(&pdev->dev, "Failing on unknown Intel deviceid 0x%x\n",
                        ent->device);
                ret = -ENODEV;
                goto bail;
        }

        /* Allocate the dd so we can get to work */
        dd = hfi1_alloc_devdata(pdev, NUM_IB_PORTS *
                                sizeof(struct hfi1_pportdata));
        if (IS_ERR(dd)) {
                ret = PTR_ERR(dd);
                goto bail;
        }

        /* Validate some global module parameters */
        ret = init_validate_rcvhdrcnt(dd, rcvhdrcnt);
        if (ret)
                goto bail;

        /* use the encoding function as a sanitization check */
        if (!encode_rcv_header_entry_size(hfi1_hdrq_entsize)) {
                dd_dev_err(dd, "Invalid HdrQ Entry size %u\n",
                           hfi1_hdrq_entsize);
                ret = -EINVAL;
                goto bail;
        }

        /* The receive eager buffer size must be set before the receive
         * contexts are created.
         *
         * Set the eager buffer size.  Validate that it falls in a range
         * allowed by the hardware - all powers of 2 between the min and
         * max.  The maximum valid MTU is within the eager buffer range
         * so we do not need to cap the max_mtu by an eager buffer size
         * setting.
         */
        if (eager_buffer_size) {
                if (!is_power_of_2(eager_buffer_size))
                        eager_buffer_size =
                                roundup_pow_of_two(eager_buffer_size);
                eager_buffer_size =
                        clamp_val(eager_buffer_size,
                                  MIN_EAGER_BUFFER * 8,
                                  MAX_EAGER_BUFFER_TOTAL);
                dd_dev_info(dd, "Eager buffer size %u\n",
                            eager_buffer_size);
        } else {
                dd_dev_err(dd, "Invalid Eager buffer size of 0\n");
                ret = -EINVAL;
                goto bail;
        }

        /* restrict value of hfi1_rcvarr_split */
        hfi1_rcvarr_split = clamp_val(hfi1_rcvarr_split, 0, 100);

        ret = hfi1_pcie_init(dd);
        if (ret)
                goto bail;

        /*
         * Do device-specific initialization, function table setup, dd
         * allocation, etc.
         */
        ret = hfi1_init_dd(dd);
        if (ret)
                goto clean_bail; /* error already printed */

        ret = create_workqueues(dd);
        if (ret)
                goto clean_bail;

        /* do the generic initialization */
        initfail = hfi1_init(dd, 0);

        /* setup vnic */
        hfi1_vnic_setup(dd);

        ret = hfi1_register_ib_device(dd);

        /*
         * Now ready for use.  this should be cleared whenever we
         * detect a reset, or initiate one.  If earlier failure,
         * we still create devices, so diags, etc. can be used
         * to determine cause of problem.
         */
        if (!initfail && !ret) {
                dd->flags |= HFI1_INITTED;
                /* create debufs files after init and ib register */
                hfi1_dbg_ibdev_init(&dd->verbs_dev);
        }

        j = hfi1_device_create(dd);
        if (j)
                dd_dev_err(dd, "Failed to create /dev devices: %d\n", -j);

        if (initfail || ret) {
                msix_clean_up_interrupts(dd);
                stop_timers(dd);
                flush_workqueue(ib_wq);
                for (pidx = 0; pidx < dd->num_pports; ++pidx) {
                        hfi1_quiet_serdes(dd->pport + pidx);
                        ppd = dd->pport + pidx;
                        if (ppd->hfi1_wq) {
                                destroy_workqueue(ppd->hfi1_wq);
                                ppd->hfi1_wq = NULL;
                        }
                        if (ppd->link_wq) {
                                destroy_workqueue(ppd->link_wq);
                                ppd->link_wq = NULL;
                        }
                }
                if (!j)
                        hfi1_device_remove(dd);
                if (!ret)
                        hfi1_unregister_ib_device(dd);
                hfi1_vnic_cleanup(dd);
                postinit_cleanup(dd);
                if (initfail)
                        ret = initfail;
                goto bail;      /* everything already cleaned */
        }

        sdma_start(dd);

        return 0;

clean_bail:
        hfi1_pcie_cleanup(pdev);
bail:
        return ret;
}

static void wait_for_clients(struct hfi1_devdata *dd)
{
        /*
         * Remove the device init value and complete the device if there is
         * no clients or wait for active clients to finish.
         */
        if (atomic_dec_and_test(&dd->user_refcount))
                complete(&dd->user_comp);

        wait_for_completion(&dd->user_comp);
}

static void remove_one(struct pci_dev *pdev)
{
        struct hfi1_devdata *dd = pci_get_drvdata(pdev);

        /* close debugfs files before ib unregister */
        hfi1_dbg_ibdev_exit(&dd->verbs_dev);

        /* remove the /dev hfi1 interface */
        hfi1_device_remove(dd);

        /* wait for existing user space clients to finish */
        wait_for_clients(dd);

        /* unregister from IB core */
        hfi1_unregister_ib_device(dd);

        /* cleanup vnic */
        hfi1_vnic_cleanup(dd);

        /*
         * Disable the IB link, disable interrupts on the device,
         * clear dma engines, etc.
         */
        shutdown_device(dd);

        stop_timers(dd);

        /* wait until all of our (qsfp) queue_work() calls complete */
        flush_workqueue(ib_wq);

        postinit_cleanup(dd);
}

static void shutdown_one(struct pci_dev *pdev)
{
        struct hfi1_devdata *dd = pci_get_drvdata(pdev);

        shutdown_device(dd);
}

/**
 * hfi1_create_rcvhdrq - create a receive header queue
 * @dd: the hfi1_ib device
 * @rcd: the context data
 *
 * This must be contiguous memory (from an i/o perspective), and must be
 * DMA'able (which means for some systems, it will go through an IOMMU,
 * or be forced into a low address range).
 */
int hfi1_create_rcvhdrq(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd)
{
        unsigned amt;
        u64 reg;

        if (!rcd->rcvhdrq) {
                gfp_t gfp_flags;

                amt = rcvhdrq_size(rcd);

                if (rcd->ctxt < dd->first_dyn_alloc_ctxt || rcd->is_vnic)
                        gfp_flags = GFP_KERNEL;
                else
                        gfp_flags = GFP_USER;
                rcd->rcvhdrq = dma_alloc_coherent(&dd->pcidev->dev, amt,
                                                  &rcd->rcvhdrq_dma,
                                                  gfp_flags | __GFP_COMP);

                if (!rcd->rcvhdrq) {
                        dd_dev_err(dd,
                                   "attempt to allocate %d bytes for ctxt %u rcvhdrq failed\n",
                                   amt, rcd->ctxt);
                        goto bail;
                }

                if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL) ||
                    HFI1_CAP_UGET_MASK(rcd->flags, DMA_RTAIL)) {
                        rcd->rcvhdrtail_kvaddr = dma_alloc_coherent(&dd->pcidev->dev,
                                                                    PAGE_SIZE,
                                                                    &rcd->rcvhdrqtailaddr_dma,
                                                                    gfp_flags);
                        if (!rcd->rcvhdrtail_kvaddr)
                                goto bail_free;
                }
        }
        /*
         * These values are per-context:
         *      RcvHdrCnt
         *      RcvHdrEntSize
         *      RcvHdrSize
         */
        reg = ((u64)(rcd->rcvhdrq_cnt >> HDRQ_SIZE_SHIFT)
                        & RCV_HDR_CNT_CNT_MASK)
                << RCV_HDR_CNT_CNT_SHIFT;
        write_kctxt_csr(dd, rcd->ctxt, RCV_HDR_CNT, reg);
        reg = (encode_rcv_header_entry_size(rcd->rcvhdrqentsize)
                        & RCV_HDR_ENT_SIZE_ENT_SIZE_MASK)
                << RCV_HDR_ENT_SIZE_ENT_SIZE_SHIFT;
        write_kctxt_csr(dd, rcd->ctxt, RCV_HDR_ENT_SIZE, reg);
        reg = ((u64)DEFAULT_RCVHDRSIZE & RCV_HDR_SIZE_HDR_SIZE_MASK)
                << RCV_HDR_SIZE_HDR_SIZE_SHIFT;
        write_kctxt_csr(dd, rcd->ctxt, RCV_HDR_SIZE, reg);

        /*
         * Program dummy tail address for every receive context
         * before enabling any receive context
         */
        write_kctxt_csr(dd, rcd->ctxt, RCV_HDR_TAIL_ADDR,
                        dd->rcvhdrtail_dummy_dma);

        return 0;

bail_free:
        dd_dev_err(dd,
                   "attempt to allocate 1 page for ctxt %u rcvhdrqtailaddr failed\n",
                   rcd->ctxt);
        dma_free_coherent(&dd->pcidev->dev, amt, rcd->rcvhdrq,
                          rcd->rcvhdrq_dma);
        rcd->rcvhdrq = NULL;
bail:
        return -ENOMEM;
}

/**
 * allocate eager buffers, both kernel and user contexts.
 * @rcd: the context we are setting up.
 *
 * Allocate the eager TID buffers and program them into hip.
 * They are no longer completely contiguous, we do multiple allocation
 * calls.  Otherwise we get the OOM code involved, by asking for too
 * much per call, with disastrous results on some kernels.
 */
int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd)
{
        struct hfi1_devdata *dd = rcd->dd;
        u32 max_entries, egrtop, alloced_bytes = 0;
        gfp_t gfp_flags;
        u16 order, idx = 0;
        int ret = 0;
        u16 round_mtu = roundup_pow_of_two(hfi1_max_mtu);

        /*
         * GFP_USER, but without GFP_FS, so buffer cache can be
         * coalesced (we hope); otherwise, even at order 4,
         * heavy filesystem activity makes these fail, and we can
         * use compound pages.
         */
        gfp_flags = __GFP_RECLAIM | __GFP_IO | __GFP_COMP;

        /*
         * The minimum size of the eager buffers is a groups of MTU-sized
         * buffers.
         * The global eager_buffer_size parameter is checked against the
         * theoretical lower limit of the value. Here, we check against the
         * MTU.
         */
        if (rcd->egrbufs.size < (round_mtu * dd->rcv_entries.group_size))
                rcd->egrbufs.size = round_mtu * dd->rcv_entries.group_size;
        /*
         * If using one-pkt-per-egr-buffer, lower the eager buffer
         * size to the max MTU (page-aligned).
         */
        if (!HFI1_CAP_KGET_MASK(rcd->flags, MULTI_PKT_EGR))
                rcd->egrbufs.rcvtid_size = round_mtu;

        /*
         * Eager buffers sizes of 1MB or less require smaller TID sizes
         * to satisfy the "multiple of 8 RcvArray entries" requirement.
         */
        if (rcd->egrbufs.size <= (1 << 20))
                rcd->egrbufs.rcvtid_size = max((unsigned long)round_mtu,
                        rounddown_pow_of_two(rcd->egrbufs.size / 8));

        while (alloced_bytes < rcd->egrbufs.size &&
               rcd->egrbufs.alloced < rcd->egrbufs.count) {
                rcd->egrbufs.buffers[idx].addr =
                        dma_alloc_coherent(&dd->pcidev->dev,
                                           rcd->egrbufs.rcvtid_size,
                                           &rcd->egrbufs.buffers[idx].dma,
                                           gfp_flags);
                if (rcd->egrbufs.buffers[idx].addr) {
                        rcd->egrbufs.buffers[idx].len =
                                rcd->egrbufs.rcvtid_size;
                        rcd->egrbufs.rcvtids[rcd->egrbufs.alloced].addr =
                                rcd->egrbufs.buffers[idx].addr;
                        rcd->egrbufs.rcvtids[rcd->egrbufs.alloced].dma =
                                rcd->egrbufs.buffers[idx].dma;
                        rcd->egrbufs.alloced++;
                        alloced_bytes += rcd->egrbufs.rcvtid_size;
                        idx++;
                } else {
                        u32 new_size, i, j;
                        u64 offset = 0;

                        /*
                         * Fail the eager buffer allocation if:
                         *   - we are already using the lowest acceptable size
                         *   - we are using one-pkt-per-egr-buffer (this implies
                         *     that we are accepting only one size)
                         */
                        if (rcd->egrbufs.rcvtid_size == round_mtu ||
                            !HFI1_CAP_KGET_MASK(rcd->flags, MULTI_PKT_EGR)) {
                                dd_dev_err(dd, "ctxt%u: Failed to allocate eager buffers\n",
                                           rcd->ctxt);
                                ret = -ENOMEM;
                                goto bail_rcvegrbuf_phys;
                        }

                        new_size = rcd->egrbufs.rcvtid_size / 2;

                        /*
                         * If the first attempt to allocate memory failed, don't
                         * fail everything but continue with the next lower
                         * size.
                         */
                        if (idx == 0) {
                                rcd->egrbufs.rcvtid_size = new_size;
                                continue;
                        }

                        /*
                         * Re-partition already allocated buffers to a smaller
                         * size.
                         */
                        rcd->egrbufs.alloced = 0;
                        for (i = 0, j = 0, offset = 0; j < idx; i++) {
                                if (i >= rcd->egrbufs.count)
                                        break;
                                rcd->egrbufs.rcvtids[i].dma =
                                        rcd->egrbufs.buffers[j].dma + offset;
                                rcd->egrbufs.rcvtids[i].addr =
                                        rcd->egrbufs.buffers[j].addr + offset;
                                rcd->egrbufs.alloced++;
                                if ((rcd->egrbufs.buffers[j].dma + offset +
                                     new_size) ==
                                    (rcd->egrbufs.buffers[j].dma +
                                     rcd->egrbufs.buffers[j].len)) {
                                        j++;
                                        offset = 0;
                                } else {
                                        offset += new_size;
                                }
                        }
                        rcd->egrbufs.rcvtid_size = new_size;
                }
        }
        rcd->egrbufs.numbufs = idx;
        rcd->egrbufs.size = alloced_bytes;

        hfi1_cdbg(PROC,
                  "ctxt%u: Alloced %u rcv tid entries @ %uKB, total %zuKB\n",
                  rcd->ctxt, rcd->egrbufs.alloced,
                  rcd->egrbufs.rcvtid_size / 1024, rcd->egrbufs.size / 1024);

        /*
         * Set the contexts rcv array head update threshold to the closest
         * power of 2 (so we can use a mask instead of modulo) below half
         * the allocated entries.
         */
        rcd->egrbufs.threshold =
                rounddown_pow_of_two(rcd->egrbufs.alloced / 2);
        /*
         * Compute the expected RcvArray entry base. This is done after
         * allocating the eager buffers in order to maximize the
         * expected RcvArray entries for the context.
         */
        max_entries = rcd->rcv_array_groups * dd->rcv_entries.group_size;
        egrtop = roundup(rcd->egrbufs.alloced, dd->rcv_entries.group_size);
        rcd->expected_count = max_entries - egrtop;
        if (rcd->expected_count > MAX_TID_PAIR_ENTRIES * 2)
                rcd->expected_count = MAX_TID_PAIR_ENTRIES * 2;

        rcd->expected_base = rcd->eager_base + egrtop;
        hfi1_cdbg(PROC, "ctxt%u: eager:%u, exp:%u, egrbase:%u, expbase:%u\n",
                  rcd->ctxt, rcd->egrbufs.alloced, rcd->expected_count,
                  rcd->eager_base, rcd->expected_base);

        if (!hfi1_rcvbuf_validate(rcd->egrbufs.rcvtid_size, PT_EAGER, &order)) {
                hfi1_cdbg(PROC,
                          "ctxt%u: current Eager buffer size is invalid %u\n",
                          rcd->ctxt, rcd->egrbufs.rcvtid_size);
                ret = -EINVAL;
                goto bail_rcvegrbuf_phys;
        }

        for (idx = 0; idx < rcd->egrbufs.alloced; idx++) {
                hfi1_put_tid(dd, rcd->eager_base + idx, PT_EAGER,
                             rcd->egrbufs.rcvtids[idx].dma, order);
                cond_resched();
        }

        return 0;

bail_rcvegrbuf_phys:
        for (idx = 0; idx < rcd->egrbufs.alloced &&
             rcd->egrbufs.buffers[idx].addr;
             idx++) {
                dma_free_coherent(&dd->pcidev->dev,
                                  rcd->egrbufs.buffers[idx].len,
                                  rcd->egrbufs.buffers[idx].addr,
                                  rcd->egrbufs.buffers[idx].dma);
                rcd->egrbufs.buffers[idx].addr = NULL;
                rcd->egrbufs.buffers[idx].dma = 0;
                rcd->egrbufs.buffers[idx].len = 0;
        }

        return ret;
}