drivers/input/keyboard/Kconfig

   1 #
   2 # Input core configuration
   3 #
   4 menuconfig INPUT_KEYBOARD
   5         bool "Keyboards" if EXPERT || !X86
   6         default y
   7         help
   8           Say Y here, and a list of supported keyboards will be displayed.
   9           This option doesn't affect the kernel.
  10
  11           If unsure, say Y.
  12
  13 if INPUT_KEYBOARD
  14
  15 config KEYBOARD_ADP5520
  16         tristate "Keypad Support for ADP5520 PMIC"
  17         depends on PMIC_ADP5520
  18         help
  19           This option enables support for the keypad scan matrix
  20           on Analog Devices ADP5520 PMICs.
  21
  22           To compile this driver as a module, choose M here: the module will
  23           be called adp5520-keys.
  24
  25 config KEYBOARD_ADP5588
  26         tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
  27         depends on I2C
  28         help
  29           Say Y here if you want to use a ADP5588/87 attached to your
  30           system I2C bus.
  31
  32           To compile this driver as a module, choose M here: the
  33           module will be called adp5588-keys.
  34
  35 config KEYBOARD_ADP5589
  36         tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander"
  37         depends on I2C
  38         help
  39           Say Y here if you want to use a ADP5585/ADP5589 attached to your
  40           system I2C bus.
  41
  42           To compile this driver as a module, choose M here: the
  43           module will be called adp5589-keys.
  44
  45 config KEYBOARD_AMIGA
  46         tristate "Amiga keyboard"
  47         depends on AMIGA
  48         help
  49           Say Y here if you are running Linux on any AMIGA and have a keyboard
  50           attached.
  51
  52           To compile this driver as a module, choose M here: the
  53           module will be called amikbd.
  54
  55 config ATARI_KBD_CORE
  56         bool
  57
  58 config KEYBOARD_ATARI
  59         tristate "Atari keyboard"
  60         depends on ATARI
  61         select ATARI_KBD_CORE
  62         help
  63           Say Y here if you are running Linux on any Atari and have a keyboard
  64           attached.
  65
  66           To compile this driver as a module, choose M here: the
  67           module will be called atakbd.
  68
  69 config KEYBOARD_ATKBD
  70         tristate "AT keyboard" if EXPERT || !X86
  71         default y
  72         select SERIO
  73         select SERIO_LIBPS2
  74         select SERIO_I8042 if X86
  75         select SERIO_GSCPS2 if GSC
  76         help
  77           Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
  78           you'll need this, unless you have a different type keyboard (USB, ADB
  79           or other). This also works for AT and PS/2 keyboards connected over a
  80           PS/2 to serial converter.
  81
  82           If unsure, say Y.
  83
  84           To compile this driver as a module, choose M here: the
  85           module will be called atkbd.
  86
  87 config KEYBOARD_ATKBD_HP_KEYCODES
  88         bool "Use HP keyboard scancodes"
  89         depends on PARISC && KEYBOARD_ATKBD
  90         default y
  91         help
  92           Say Y here if you have a PA-RISC machine and want to use an AT or
  93           PS/2 keyboard, and your keyboard uses keycodes that are specific to
  94           PA-RISC keyboards.
  95
  96           Say N if you use a standard keyboard.
  97
  98 config KEYBOARD_ATKBD_RDI_KEYCODES
  99         bool "Use PrecisionBook keyboard scancodes"
 100         depends on KEYBOARD_ATKBD_HP_KEYCODES
 101         default n
 102         help
 103           If you have an RDI PrecisionBook, say Y here if you want to use its
 104           built-in keyboard (as opposed to an external keyboard).
 105
 106           The PrecisionBook has five keys that conflict with those used by most
 107           AT and PS/2 keyboards. These are as follows:
 108
 109             PrecisionBook    Standard AT or PS/2
 110
 111             F1               F12
 112             Left Ctrl        Left Alt
 113             Caps Lock        Left Ctrl
 114             Right Ctrl       Caps Lock
 115             Left             102nd key (the key to the right of Left Shift)
 116
 117           If you say N here, and use the PrecisionBook keyboard, then each key
 118           in the left-hand column will be interpreted as the corresponding key
 119           in the right-hand column.
 120
 121           If you say Y here, and use an external keyboard, then each key in the
 122           right-hand column will be interpreted as the key shown in the
 123           left-hand column.
 124
 125 config KEYBOARD_QT1070
 126        tristate "Atmel AT42QT1070 Touch Sensor Chip"
 127        depends on I2C
 128        help
 129          Say Y here if you want to use Atmel AT42QT1070 QTouch
 130          Sensor chip as input device.
 131
 132          To compile this driver as a module, choose M here:
 133          the module will be called qt1070
 134
 135 config KEYBOARD_QT2160
 136         tristate "Atmel AT42QT2160 Touch Sensor Chip"
 137         depends on I2C && EXPERIMENTAL
 138         help
 139           If you say yes here you get support for Atmel AT42QT2160 Touch
 140           Sensor chip as a keyboard input.
 141
 142           This driver can also be built as a module. If so, the module
 143           will be called qt2160.
 144
 145 config KEYBOARD_BFIN
 146         tristate "Blackfin BF54x keypad support"
 147         depends on (BF54x && !BF544)
 148         help
 149           Say Y here if you want to use the BF54x keypad.
 150
 151           To compile this driver as a module, choose M here: the
 152           module will be called bf54x-keys.
 153
 154 config KEYBOARD_LKKBD
 155         tristate "DECstation/VAXstation LK201/LK401 keyboard"
 156         select SERIO
 157         help
 158           Say Y here if you want to use a LK201 or LK401 style serial
 159           keyboard. This keyboard is also useable on PCs if you attach
 160           it with the inputattach program. The connector pinout is
 161           described within lkkbd.c.
 162
 163           To compile this driver as a module, choose M here: the
 164           module will be called lkkbd.
 165
 166 config KEYBOARD_EP93XX
 167         tristate "EP93xx Matrix Keypad support"
 168         depends on ARCH_EP93XX
 169         help
 170           Say Y here to enable the matrix keypad on the Cirrus EP93XX.
 171
 172           To compile this driver as a module, choose M here: the
 173           module will be called ep93xx_keypad.
 174
 175 config KEYBOARD_GPIO
 176         tristate "GPIO Buttons"
 177         depends on GENERIC_GPIO
 178         help
 179           This driver implements support for buttons connected
 180           to GPIO pins of various CPUs (and some other chips).
 181
 182           Say Y here if your device has buttons connected
 183           directly to such GPIO pins.  Your board-specific
 184           setup logic must also provide a platform device,
 185           with configuration data saying which GPIOs are used.
 186
 187           To compile this driver as a module, choose M here: the
 188           module will be called gpio_keys.
 189
 190 config KEYBOARD_GPIO_POLLED
 191         tristate "Polled GPIO buttons"
 192         depends on GENERIC_GPIO
 193         select INPUT_POLLDEV
 194         help
 195           This driver implements support for buttons connected
 196           to GPIO pins that are not capable of generating interrupts.
 197
 198           Say Y here if your device has buttons connected
 199           directly to such GPIO pins.  Your board-specific
 200           setup logic must also provide a platform device,
 201           with configuration data saying which GPIOs are used.
 202
 203           To compile this driver as a module, choose M here: the
 204           module will be called gpio_keys_polled.
 205
 206 config KEYBOARD_TCA6416
 207         tristate "TCA6416/TCA6408A Keypad Support"
 208         depends on I2C
 209         help
 210           This driver implements basic keypad functionality
 211           for keys connected through TCA6416/TCA6408A IO expanders.
 212
 213           Say Y here if your device has keys connected to
 214           TCA6416/TCA6408A IO expander. Your board-specific setup logic
 215           must also provide pin-mask details(of which TCA6416 pins
 216           are used for keypad).
 217
 218           If enabled the entire TCA6416 device will be managed through
 219           this driver.
 220
 221           To compile this driver as a module, choose M here: the
 222           module will be called tca6416_keypad.
 223
 224 config KEYBOARD_TCA8418
 225         tristate "TCA8418 Keypad Support"
 226         depends on I2C
 227         help
 228           This driver implements basic keypad functionality
 229           for keys connected through TCA8418 keypad decoder.
 230
 231           Say Y here if your device has keys connected to
 232           TCA8418 keypad decoder.
 233
 234           If enabled the complete TCA8418 device will be managed through
 235           this driver.
 236
 237           To compile this driver as a module, choose M here: the
 238           module will be called tca8418_keypad.
 239
 240 config KEYBOARD_MATRIX
 241         tristate "GPIO driven matrix keypad support"
 242         depends on GENERIC_GPIO
 243         help
 244           Enable support for GPIO driven matrix keypad.
 245
 246           To compile this driver as a module, choose M here: the
 247           module will be called matrix_keypad.
 248
 249 config KEYBOARD_HIL_OLD
 250         tristate "HP HIL keyboard support (simple driver)"
 251         depends on GSC || HP300
 252         default y
 253         help
 254           The "Human Interface Loop" is a older, 8-channel USB-like
 255           controller used in several Hewlett Packard models. This driver
 256           was adapted from the one written for m68k/hp300, and implements
 257           support for a keyboard attached to the HIL port, but not for
 258           any other types of HIL input devices like mice or tablets.
 259           However, it has been thoroughly tested and is stable.
 260
 261           If you want full HIL support including support for multiple
 262           keyboards, mice, and tablets, you have to enable the
 263           "HP System Device Controller i8042 Support" in the input/serio
 264           submenu.
 265
 266 config KEYBOARD_HIL
 267         tristate "HP HIL keyboard/pointer support"
 268         depends on GSC || HP300
 269         default y
 270         select HP_SDC
 271         select HIL_MLC
 272         select SERIO
 273         help
 274           The "Human Interface Loop" is a older, 8-channel USB-like
 275           controller used in several Hewlett Packard models.
 276           This driver implements support for HIL-keyboards and pointing
 277           devices (mice, tablets, touchscreens) attached
 278           to your machine, so normally you should say Y here.
 279
 280 config KEYBOARD_HP6XX
 281         tristate "HP Jornada 6xx keyboard"
 282         depends on SH_HP6XX
 283         select INPUT_POLLDEV
 284         help
 285           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 286           support the built-in keyboard.
 287
 288           To compile this driver as a module, choose M here: the
 289           module will be called jornada680_kbd.
 290
 291 config KEYBOARD_HP7XX
 292         tristate "HP Jornada 7xx keyboard"
 293         depends on SA1100_JORNADA720_SSP && SA1100_SSP
 294         help
 295           Say Y here if you have a HP Jornada 710/720/728 and want to
 296           support the built-in keyboard.
 297
 298           To compile this driver as a module, choose M here: the
 299           module will be called jornada720_kbd.
 300
 301 config KEYBOARD_LM8323
 302         tristate "LM8323 keypad chip"
 303         depends on I2C
 304         depends on LEDS_CLASS
 305         help
 306           If you say yes here you get support for the National Semiconductor
 307           LM8323 keypad controller.
 308
 309           To compile this driver as a module, choose M here: the
 310           module will be called lm8323.
 311
 312 config KEYBOARD_LOCOMO
 313         tristate "LoCoMo Keyboard Support"
 314         depends on SHARP_LOCOMO
 315         help
 316           Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
 317
 318           To compile this driver as a module, choose M here: the
 319           module will be called locomokbd.
 320
 321 config KEYBOARD_MAPLE
 322         tristate "Maple bus keyboard"
 323         depends on SH_DREAMCAST && MAPLE
 324         help
 325           Say Y here if you have a Dreamcast console running Linux and have
 326           a keyboard attached to its Maple bus.
 327
 328           To compile this driver as a module, choose M here: the
 329           module will be called maple_keyb.
 330
 331 config KEYBOARD_MAX7359
 332         tristate "Maxim MAX7359 Key Switch Controller"
 333         depends on I2C
 334         help
 335           If you say yes here you get support for the Maxim MAX7359 Key
 336           Switch Controller chip. This providers microprocessors with
 337           management of up to 64 key switches
 338
 339           To compile this driver as a module, choose M here: the
 340           module will be called max7359_keypad.
 341
 342 config KEYBOARD_MCS
 343         tristate "MELFAS MCS Touchkey"
 344         depends on I2C
 345         help
 346           Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
 347           chip in your system.
 348
 349           If unsure, say N.
 350
 351           To compile this driver as a module, choose M here: the
 352           module will be called mcs_touchkey.
 353
 354 config KEYBOARD_MPR121
 355         tristate "Freescale MPR121 Touchkey"
 356         depends on I2C
 357         help
 358           Say Y here if you have Freescale MPR121 touchkey controller
 359           chip in your system.
 360
 361           If unsure, say N.
 362
 363           To compile this driver as a module, choose M here: the
 364           module will be called mpr121_touchkey.
 365
 366 config KEYBOARD_IMX
 367         tristate "IMX keypad support"
 368         depends on ARCH_MXC
 369         help
 370           Enable support for IMX keypad port.
 371
 372           To compile this driver as a module, choose M here: the
 373           module will be called imx_keypad.
 374
 375 config KEYBOARD_NEWTON
 376         tristate "Newton keyboard"
 377         select SERIO
 378         help
 379           Say Y here if you have a Newton keyboard on a serial port.
 380
 381           To compile this driver as a module, choose M here: the
 382           module will be called newtonkbd.
 383
 384 config KEYBOARD_NOMADIK
 385         tristate "ST-Ericsson Nomadik SKE keyboard"
 386         depends on PLAT_NOMADIK
 387         help
 388           Say Y here if you want to use a keypad provided on the SKE controller
 389           used on the Ux500 and Nomadik platforms
 390
 391           To compile this driver as a module, choose M here: the
 392           module will be called nmk-ske-keypad.
 393
 394 config KEYBOARD_TEGRA
 395         tristate "NVIDIA Tegra internal matrix keyboard controller support"
 396         depends on ARCH_TEGRA
 397         help
 398           Say Y here if you want to use a matrix keyboard connected directly
 399           to the internal keyboard controller on Tegra SoCs.
 400
 401           To compile this driver as a module, choose M here: the
 402           module will be called tegra-kbc.
 403
 404 config KEYBOARD_OPENCORES
 405         tristate "OpenCores Keyboard Controller"
 406         help
 407           Say Y here if you want to use the OpenCores Keyboard Controller
 408           http://www.opencores.org/project,keyboardcontroller
 409
 410           To compile this driver as a module, choose M here; the
 411           module will be called opencores-kbd.
 412
 413 config KEYBOARD_PXA27x
 414         tristate "PXA27x/PXA3xx keypad support"
 415         depends on PXA27x || PXA3xx || ARCH_MMP
 416         help
 417           Enable support for PXA27x/PXA3xx keypad controller.
 418
 419           To compile this driver as a module, choose M here: the
 420           module will be called pxa27x_keypad.
 421
 422 config KEYBOARD_PXA930_ROTARY
 423         tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
 424         depends on CPU_PXA930 || CPU_PXA935
 425         help
 426           Enable support for PXA930/PXA935 Enhanced Rotary Controller.
 427
 428           To compile this driver as a module, choose M here: the
 429           module will be called pxa930_rotary.
 430
 431 config KEYBOARD_PMIC8XXX
 432         tristate "Qualcomm PMIC8XXX keypad support"
 433         depends on MFD_PM8XXX
 434         help
 435           Say Y here if you want to enable the driver for the PMIC8XXX
 436           keypad provided as a reference design from Qualcomm. This is intended
 437           to support upto 18x8 matrix based keypad design.
 438
 439           To compile this driver as a module, choose M here: the module will
 440           be called pmic8xxx-keypad.
 441
 442 config KEYBOARD_SAMSUNG
 443         tristate "Samsung keypad support"
 444         depends on SAMSUNG_DEV_KEYPAD
 445         help
 446           Say Y here if you want to use the Samsung keypad.
 447
 448           To compile this driver as a module, choose M here: the
 449           module will be called samsung-keypad.
 450
 451 config KEYBOARD_STOWAWAY
 452         tristate "Stowaway keyboard"
 453         select SERIO
 454         help
 455           Say Y here if you have a Stowaway keyboard on a serial port.
 456           Stowaway compatible keyboards like Dicota Input-PDA keyboard
 457           are also supported by this driver.
 458
 459           To compile this driver as a module, choose M here: the
 460           module will be called stowaway.
 461
 462 config KEYBOARD_SUNKBD
 463         tristate "Sun Type 4 and Type 5 keyboard"
 464         select SERIO
 465         help
 466           Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
 467           connected either to the Sun keyboard connector or to an serial
 468           (RS-232) port via a simple adapter.
 469
 470           To compile this driver as a module, choose M here: the
 471           module will be called sunkbd.
 472
 473 config KEYBOARD_SH_KEYSC
 474         tristate "SuperH KEYSC keypad support"
 475         depends on SUPERH || ARCH_SHMOBILE
 476         help
 477           Say Y here if you want to use a keypad attached to the KEYSC block
 478           on SuperH processors such as sh7722 and sh7343.
 479
 480           To compile this driver as a module, choose M here: the
 481           module will be called sh_keysc.
 482
 483 config KEYBOARD_STMPE
 484         tristate "STMPE keypad support"
 485         depends on MFD_STMPE
 486         help
 487           Say Y here if you want to use the keypad controller on STMPE I/O
 488           expanders.
 489
 490           To compile this driver as a module, choose M here: the module will be
 491           called stmpe-keypad.
 492
 493 config KEYBOARD_DAVINCI
 494         tristate "TI DaVinci Key Scan"
 495         depends on ARCH_DAVINCI_DM365
 496         help
 497           Say Y to enable keypad module support for the TI DaVinci
 498           platforms (DM365).
 499
 500           To compile this driver as a module, choose M here: the
 501           module will be called davinci_keyscan.
 502
 503 config KEYBOARD_OMAP
 504         tristate "TI OMAP keypad support"
 505         depends on (ARCH_OMAP1 || ARCH_OMAP2)
 506         help
 507           Say Y here if you want to use the OMAP keypad.
 508
 509           To compile this driver as a module, choose M here: the
 510           module will be called omap-keypad.
 511
 512 config KEYBOARD_OMAP4
 513         tristate "TI OMAP4 keypad support"
 514         depends on ARCH_OMAP4
 515         help
 516           Say Y here if you want to use the OMAP4 keypad.
 517
 518           To compile this driver as a module, choose M here: the
 519           module will be called omap4-keypad.
 520
 521 config KEYBOARD_SPEAR
 522         tristate "ST SPEAR keyboard support"
 523         depends on PLAT_SPEAR
 524         help
 525           Say Y here if you want to use the SPEAR keyboard.
 526
 527           To compile this driver as a module, choose M here: the
 528           module will be called spear-keboard.
 529
 530 config KEYBOARD_TC3589X
 531         tristate "TC3589X Keypad support"
 532         depends on MFD_TC3589X
 533         help
 534           Say Y here if you want to use the keypad controller on
 535           TC35892/3 I/O expander.
 536
 537           To compile this driver as a module, choose M here: the
 538           module will be called tc3589x-keypad.
 539
 540 config KEYBOARD_TNETV107X
 541         tristate "TI TNETV107X keypad support"
 542         depends on ARCH_DAVINCI_TNETV107X
 543         help
 544           Say Y here if you want to use the TNETV107X keypad.
 545
 546           To compile this driver as a module, choose M here: the
 547           module will be called tnetv107x-keypad.
 548
 549 config KEYBOARD_TWL4030
 550         tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
 551         depends on TWL4030_CORE
 552         help
 553           Say Y here if your board use the keypad controller on
 554           TWL4030 family chips.  It's safe to say enable this
 555           even on boards that don't use the keypad controller.
 556
 557           To compile this driver as a module, choose M here: the
 558           module will be called twl4030_keypad.
 559
 560 config KEYBOARD_XTKBD
 561         tristate "XT keyboard"
 562         select SERIO
 563         help
 564           Say Y here if you want to use the old IBM PC/XT keyboard (or
 565           compatible) on your system. This is only possible with a
 566           parallel port keyboard adapter, you cannot connect it to the
 567           keyboard port on a PC that runs Linux.
 568
 569           To compile this driver as a module, choose M here: the
 570           module will be called xtkbd.
 571
 572 config KEYBOARD_W90P910
 573         tristate "W90P910 Matrix Keypad support"
 574         depends on ARCH_W90X900
 575         help
 576           Say Y here to enable the matrix keypad on evaluation board
 577           based on W90P910.
 578
 579           To compile this driver as a module, choose M here: the
 580           module will be called w90p910_keypad.
 581
 582 endif