drivers/input/keyboard/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 #
   3 # Input core configuration
   4 #
   5 menuconfig INPUT_KEYBOARD
   6         bool "Keyboards"
   7         default y
   8         help
   9           Say Y here, and a list of supported keyboards will be displayed.
  10           This option doesn't affect the kernel.
  11
  12           If unsure, say Y.
  13
  14 if INPUT_KEYBOARD
  15
  16 config KEYBOARD_ADC
  17         tristate "ADC Ladder Buttons"
  18         depends on IIO
  19         help
  20           This driver implements support for buttons connected
  21           to an ADC using a resistor ladder.
  22
  23           Say Y here if your device has such buttons connected to an ADC.  Your
  24           board-specific setup logic must also provide a configuration data
  25           for mapping voltages to buttons.
  26
  27           To compile this driver as a module, choose M here: the
  28           module will be called adc_keys.
  29
  30 config KEYBOARD_ADP5520
  31         tristate "Keypad Support for ADP5520 PMIC"
  32         depends on PMIC_ADP5520
  33         help
  34           This option enables support for the keypad scan matrix
  35           on Analog Devices ADP5520 PMICs.
  36
  37           To compile this driver as a module, choose M here: the module will
  38           be called adp5520-keys.
  39
  40 config KEYBOARD_ADP5588
  41         tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
  42         depends on I2C
  43         help
  44           Say Y here if you want to use a ADP5588/87 attached to your
  45           system I2C bus.
  46
  47           To compile this driver as a module, choose M here: the
  48           module will be called adp5588-keys.
  49
  50 config KEYBOARD_ADP5589
  51         tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander"
  52         depends on I2C
  53         help
  54           Say Y here if you want to use a ADP5585/ADP5589 attached to your
  55           system I2C bus.
  56
  57           To compile this driver as a module, choose M here: the
  58           module will be called adp5589-keys.
  59
  60 config KEYBOARD_AMIGA
  61         tristate "Amiga keyboard"
  62         depends on AMIGA
  63         help
  64           Say Y here if you are running Linux on any AMIGA and have a keyboard
  65           attached.
  66
  67           To compile this driver as a module, choose M here: the
  68           module will be called amikbd.
  69
  70 config KEYBOARD_APPLESPI
  71         tristate "Apple SPI keyboard and trackpad"
  72         depends on ACPI && EFI
  73         depends on SPI
  74         depends on X86 || COMPILE_TEST
  75         depends on LEDS_CLASS
  76         select CRC16
  77         help
  78           Say Y here if you are running Linux on any Apple MacBook8,1 or later,
  79           or any MacBookPro13,* or MacBookPro14,*.
  80
  81           You will also need to enable appropriate SPI master controllers:
  82           spi_pxa2xx_platform and spi_pxa2xx_pci for MacBook8,1, and
  83           spi_pxa2xx_platform and intel_lpss_pci for the rest.
  84
  85           To compile this driver as a module, choose M here: the
  86           module will be called applespi.
  87
  88 config KEYBOARD_ATARI
  89         tristate "Atari keyboard"
  90         depends on ATARI
  91         select ATARI_KBD_CORE
  92         help
  93           Say Y here if you are running Linux on any Atari and have a keyboard
  94           attached.
  95
  96           To compile this driver as a module, choose M here: the
  97           module will be called atakbd.
  98
  99 config KEYBOARD_ATKBD
 100         tristate "AT keyboard"
 101         default y
 102         select SERIO
 103         select SERIO_LIBPS2
 104         select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO
 105         select SERIO_GSCPS2 if GSC
 106         help
 107           Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
 108           you'll need this, unless you have a different type keyboard (USB, ADB
 109           or other). This also works for AT and PS/2 keyboards connected over a
 110           PS/2 to serial converter.
 111
 112           If unsure, say Y.
 113
 114           To compile this driver as a module, choose M here: the
 115           module will be called atkbd.
 116
 117 config KEYBOARD_ATKBD_HP_KEYCODES
 118         bool "Use HP keyboard scancodes"
 119         depends on PARISC && KEYBOARD_ATKBD
 120         default y
 121         help
 122           Say Y here if you have a PA-RISC machine and want to use an AT or
 123           PS/2 keyboard, and your keyboard uses keycodes that are specific to
 124           PA-RISC keyboards.
 125
 126           Say N if you use a standard keyboard.
 127
 128 config KEYBOARD_ATKBD_RDI_KEYCODES
 129         bool "Use PrecisionBook keyboard scancodes"
 130         depends on KEYBOARD_ATKBD_HP_KEYCODES
 131         default n
 132         help
 133           If you have an RDI PrecisionBook, say Y here if you want to use its
 134           built-in keyboard (as opposed to an external keyboard).
 135
 136           The PrecisionBook has five keys that conflict with those used by most
 137           AT and PS/2 keyboards. These are as follows:
 138
 139             PrecisionBook    Standard AT or PS/2
 140
 141             F1               F12
 142             Left Ctrl        Left Alt
 143             Caps Lock        Left Ctrl
 144             Right Ctrl       Caps Lock
 145             Left             102nd key (the key to the right of Left Shift)
 146
 147           If you say N here, and use the PrecisionBook keyboard, then each key
 148           in the left-hand column will be interpreted as the corresponding key
 149           in the right-hand column.
 150
 151           If you say Y here, and use an external keyboard, then each key in the
 152           right-hand column will be interpreted as the key shown in the
 153           left-hand column.
 154
 155 config KEYBOARD_QT1050
 156         tristate "Microchip AT42QT1050 Touch Sensor Chip"
 157         depends on I2C
 158         select REGMAP_I2C
 159         help
 160           Say Y here if you want to use Microchip AT42QT1050 QTouch
 161           Sensor chip as input device.
 162
 163           To compile this driver as a module, choose M here:
 164           the module will be called qt1050
 165
 166 config KEYBOARD_QT1070
 167         tristate "Atmel AT42QT1070 Touch Sensor Chip"
 168         depends on I2C
 169         help
 170           Say Y here if you want to use Atmel AT42QT1070 QTouch
 171           Sensor chip as input device.
 172
 173           To compile this driver as a module, choose M here:
 174           the module will be called qt1070
 175
 176 config KEYBOARD_QT2160
 177         tristate "Atmel AT42QT2160 Touch Sensor Chip"
 178         depends on I2C
 179         help
 180           If you say yes here you get support for Atmel AT42QT2160 Touch
 181           Sensor chip as a keyboard input.
 182
 183           This driver can also be built as a module. If so, the module
 184           will be called qt2160.
 185
 186 config KEYBOARD_CLPS711X
 187         tristate "CLPS711X Keypad support"
 188         depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST)
 189         select INPUT_MATRIXKMAP
 190         help
 191           Say Y here to enable the matrix keypad on the Cirrus Logic
 192           CLPS711X CPUs.
 193
 194           To compile this driver as a module, choose M here: the
 195           module will be called clps711x-keypad.
 196
 197 config KEYBOARD_DLINK_DIR685
 198         tristate "D-Link DIR-685 touchkeys support"
 199         depends on I2C
 200         default ARCH_GEMINI
 201         help
 202           If you say yes here you get support for the D-Link DIR-685
 203           touchkeys.
 204
 205           To compile this driver as a module, choose M here: the
 206           module will be called dlink-dir685-touchkeys.
 207
 208 config KEYBOARD_LKKBD
 209         tristate "DECstation/VAXstation LK201/LK401 keyboard"
 210         select SERIO
 211         help
 212           Say Y here if you want to use a LK201 or LK401 style serial
 213           keyboard. This keyboard is also usable on PCs if you attach
 214           it with the inputattach program. The connector pinout is
 215           described within lkkbd.c.
 216
 217           To compile this driver as a module, choose M here: the
 218           module will be called lkkbd.
 219
 220 config KEYBOARD_EP93XX
 221         tristate "EP93xx Matrix Keypad support"
 222         depends on ARCH_EP93XX || COMPILE_TEST
 223         select INPUT_MATRIXKMAP
 224         help
 225           Say Y here to enable the matrix keypad on the Cirrus EP93XX.
 226
 227           To compile this driver as a module, choose M here: the
 228           module will be called ep93xx_keypad.
 229
 230 config KEYBOARD_GPIO
 231         tristate "GPIO Buttons"
 232         depends on GPIOLIB || COMPILE_TEST
 233         help
 234           This driver implements support for buttons connected
 235           to GPIO pins of various CPUs (and some other chips).
 236
 237           Say Y here if your device has buttons connected
 238           directly to such GPIO pins.  Your board-specific
 239           setup logic must also provide a platform device,
 240           with configuration data saying which GPIOs are used.
 241
 242           To compile this driver as a module, choose M here: the
 243           module will be called gpio_keys.
 244
 245 config KEYBOARD_GPIO_POLLED
 246         tristate "Polled GPIO buttons"
 247         depends on GPIOLIB
 248         help
 249           This driver implements support for buttons connected
 250           to GPIO pins that are not capable of generating interrupts.
 251
 252           Say Y here if your device has buttons connected
 253           directly to such GPIO pins.  Your board-specific
 254           setup logic must also provide a platform device,
 255           with configuration data saying which GPIOs are used.
 256
 257           To compile this driver as a module, choose M here: the
 258           module will be called gpio_keys_polled.
 259
 260 config KEYBOARD_TCA6416
 261         tristate "TCA6416/TCA6408A Keypad Support"
 262         depends on I2C
 263         help
 264           This driver implements basic keypad functionality
 265           for keys connected through TCA6416/TCA6408A IO expanders.
 266
 267           Say Y here if your device has keys connected to
 268           TCA6416/TCA6408A IO expander. Your board-specific setup logic
 269           must also provide pin-mask details(of which TCA6416 pins
 270           are used for keypad).
 271
 272           If enabled the entire TCA6416 device will be managed through
 273           this driver.
 274
 275           To compile this driver as a module, choose M here: the
 276           module will be called tca6416_keypad.
 277
 278 config KEYBOARD_TCA8418
 279         tristate "TCA8418 Keypad Support"
 280         depends on I2C
 281         select INPUT_MATRIXKMAP
 282         help
 283           This driver implements basic keypad functionality
 284           for keys connected through TCA8418 keypad decoder.
 285
 286           Say Y here if your device has keys connected to
 287           TCA8418 keypad decoder.
 288
 289           If enabled the complete TCA8418 device will be managed through
 290           this driver.
 291
 292           To compile this driver as a module, choose M here: the
 293           module will be called tca8418_keypad.
 294
 295 config KEYBOARD_MATRIX
 296         tristate "GPIO driven matrix keypad support"
 297         depends on GPIOLIB || COMPILE_TEST
 298         select INPUT_MATRIXKMAP
 299         help
 300           Enable support for GPIO driven matrix keypad.
 301
 302           To compile this driver as a module, choose M here: the
 303           module will be called matrix_keypad.
 304
 305 config KEYBOARD_HIL_OLD
 306         tristate "HP HIL keyboard support (simple driver)"
 307         depends on GSC || HP300
 308         default y
 309         help
 310           The "Human Interface Loop" is a older, 8-channel USB-like
 311           controller used in several Hewlett Packard models. This driver
 312           was adapted from the one written for m68k/hp300, and implements
 313           support for a keyboard attached to the HIL port, but not for
 314           any other types of HIL input devices like mice or tablets.
 315           However, it has been thoroughly tested and is stable.
 316
 317           If you want full HIL support including support for multiple
 318           keyboards, mice, and tablets, you have to enable the
 319           "HP System Device Controller i8042 Support" in the input/serio
 320           submenu.
 321
 322 config KEYBOARD_HIL
 323         tristate "HP HIL keyboard/pointer support"
 324         depends on GSC || HP300
 325         default y
 326         select HP_SDC
 327         select HIL_MLC
 328         select SERIO
 329         help
 330           The "Human Interface Loop" is a older, 8-channel USB-like
 331           controller used in several Hewlett Packard models.
 332           This driver implements support for HIL-keyboards and pointing
 333           devices (mice, tablets, touchscreens) attached
 334           to your machine, so normally you should say Y here.
 335
 336 config KEYBOARD_HP6XX
 337         tristate "HP Jornada 6xx keyboard"
 338         depends on SH_HP6XX
 339         help
 340           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 341           support the built-in keyboard.
 342
 343           To compile this driver as a module, choose M here: the
 344           module will be called jornada680_kbd.
 345
 346 config KEYBOARD_HP7XX
 347         tristate "HP Jornada 7xx keyboard"
 348         depends on SA1100_JORNADA720_SSP && SA1100_SSP
 349         help
 350           Say Y here if you have a HP Jornada 710/720/728 and want to
 351           support the built-in keyboard.
 352
 353           To compile this driver as a module, choose M here: the
 354           module will be called jornada720_kbd.
 355
 356 config KEYBOARD_LM8323
 357         tristate "LM8323 keypad chip"
 358         depends on I2C
 359         depends on LEDS_CLASS
 360         help
 361           If you say yes here you get support for the National Semiconductor
 362           LM8323 keypad controller.
 363
 364           To compile this driver as a module, choose M here: the
 365           module will be called lm8323.
 366
 367 config KEYBOARD_LM8333
 368         tristate "LM8333 keypad chip"
 369         depends on I2C
 370         select INPUT_MATRIXKMAP
 371         help
 372           If you say yes here you get support for the National Semiconductor
 373           LM8333 keypad controller.
 374
 375           To compile this driver as a module, choose M here: the
 376           module will be called lm8333.
 377
 378 config KEYBOARD_LOCOMO
 379         tristate "LoCoMo Keyboard Support"
 380         depends on SHARP_LOCOMO
 381         help
 382           Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
 383
 384           To compile this driver as a module, choose M here: the
 385           module will be called locomokbd.
 386
 387 config KEYBOARD_LPC32XX
 388         tristate "LPC32XX matrix key scanner support"
 389         depends on ARCH_LPC32XX && OF
 390         select INPUT_MATRIXKMAP
 391         help
 392           Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
 393           connected to a key matrix.
 394
 395           To compile this driver as a module, choose M here: the
 396           module will be called lpc32xx-keys.
 397
 398 config KEYBOARD_MAPLE
 399         tristate "Maple bus keyboard"
 400         depends on SH_DREAMCAST && MAPLE
 401         help
 402           Say Y here if you have a Dreamcast console running Linux and have
 403           a keyboard attached to its Maple bus.
 404
 405           To compile this driver as a module, choose M here: the
 406           module will be called maple_keyb.
 407
 408 config KEYBOARD_MAX7359
 409         tristate "Maxim MAX7359 Key Switch Controller"
 410         select INPUT_MATRIXKMAP
 411         depends on I2C
 412         help
 413           If you say yes here you get support for the Maxim MAX7359 Key
 414           Switch Controller chip. This providers microprocessors with
 415           management of up to 64 key switches
 416
 417           To compile this driver as a module, choose M here: the
 418           module will be called max7359_keypad.
 419
 420 config KEYBOARD_MCS
 421         tristate "MELFAS MCS Touchkey"
 422         depends on I2C
 423         help
 424           Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
 425           chip in your system.
 426
 427           If unsure, say N.
 428
 429           To compile this driver as a module, choose M here: the
 430           module will be called mcs_touchkey.
 431
 432 config KEYBOARD_MPR121
 433         tristate "Freescale MPR121 Touchkey"
 434         depends on I2C
 435         help
 436           Say Y here if you have Freescale MPR121 touchkey controller
 437           chip in your system.
 438
 439           If unsure, say N.
 440
 441           To compile this driver as a module, choose M here: the
 442           module will be called mpr121_touchkey.
 443
 444 config KEYBOARD_SNVS_PWRKEY
 445         tristate "IMX SNVS Power Key Driver"
 446         depends on ARCH_MXC || (COMPILE_TEST && HAS_IOMEM)
 447         depends on OF
 448         help
 449           This is the snvs powerkey driver for the Freescale i.MX application
 450           processors.
 451
 452           To compile this driver as a module, choose M here; the
 453           module will be called snvs_pwrkey.
 454
 455 config KEYBOARD_IMX
 456         tristate "IMX keypad support"
 457         depends on ARCH_MXC || COMPILE_TEST
 458         select INPUT_MATRIXKMAP
 459         help
 460           Enable support for IMX keypad port.
 461
 462           To compile this driver as a module, choose M here: the
 463           module will be called imx_keypad.
 464
 465 config KEYBOARD_IMX_SC_KEY
 466         tristate "IMX SCU Key Driver"
 467         depends on IMX_SCU
 468         help
 469           This is the system controller key driver for NXP i.MX SoCs with
 470           system controller inside.
 471
 472           To compile this driver as a module, choose M here: the
 473           module will be called imx_sc_key.
 474
 475 config KEYBOARD_NEWTON
 476         tristate "Newton keyboard"
 477         select SERIO
 478         help
 479           Say Y here if you have a Newton keyboard on a serial port.
 480
 481           To compile this driver as a module, choose M here: the
 482           module will be called newtonkbd.
 483
 484 config KEYBOARD_NOMADIK
 485         tristate "ST-Ericsson Nomadik SKE keyboard"
 486         depends on (ARCH_NOMADIK || ARCH_U8500)
 487         select INPUT_MATRIXKMAP
 488         help
 489           Say Y here if you want to use a keypad provided on the SKE controller
 490           used on the Ux500 and Nomadik platforms
 491
 492           To compile this driver as a module, choose M here: the
 493           module will be called nmk-ske-keypad.
 494
 495 config KEYBOARD_NSPIRE
 496         tristate "TI-NSPIRE built-in keyboard"
 497         depends on ARCH_NSPIRE && OF
 498         select INPUT_MATRIXKMAP
 499         help
 500           Say Y here if you want to use the built-in keypad on TI-NSPIRE.
 501
 502           To compile this driver as a module, choose M here: the
 503           module will be called nspire-keypad.
 504
 505 config KEYBOARD_TEGRA
 506         tristate "NVIDIA Tegra internal matrix keyboard controller support"
 507         depends on ARCH_TEGRA && OF
 508         select INPUT_MATRIXKMAP
 509         help
 510           Say Y here if you want to use a matrix keyboard connected directly
 511           to the internal keyboard controller on Tegra SoCs.
 512
 513           To compile this driver as a module, choose M here: the
 514           module will be called tegra-kbc.
 515
 516 config KEYBOARD_OPENCORES
 517         tristate "OpenCores Keyboard Controller"
 518         depends on HAS_IOMEM
 519         help
 520           Say Y here if you want to use the OpenCores Keyboard Controller
 521           http://www.opencores.org/project,keyboardcontroller
 522
 523           To compile this driver as a module, choose M here; the
 524           module will be called opencores-kbd.
 525
 526 config KEYBOARD_PXA27x
 527         tristate "PXA27x/PXA3xx keypad support"
 528         depends on PXA27x || PXA3xx || ARCH_MMP
 529         select INPUT_MATRIXKMAP
 530         help
 531           Enable support for PXA27x/PXA3xx keypad controller.
 532
 533           To compile this driver as a module, choose M here: the
 534           module will be called pxa27x_keypad.
 535
 536 config KEYBOARD_PXA930_ROTARY
 537         tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
 538         depends on CPU_PXA930 || CPU_PXA935
 539         help
 540           Enable support for PXA930/PXA935 Enhanced Rotary Controller.
 541
 542           To compile this driver as a module, choose M here: the
 543           module will be called pxa930_rotary.
 544
 545 config KEYBOARD_PMIC8XXX
 546         tristate "Qualcomm PMIC8XXX keypad support"
 547         depends on MFD_PM8XXX
 548         select INPUT_MATRIXKMAP
 549         help
 550           Say Y here if you want to enable the driver for the PMIC8XXX
 551           keypad provided as a reference design from Qualcomm. This is intended
 552           to support upto 18x8 matrix based keypad design.
 553
 554           To compile this driver as a module, choose M here: the module will
 555           be called pmic8xxx-keypad.
 556
 557 config KEYBOARD_SAMSUNG
 558         tristate "Samsung keypad support"
 559         depends on HAVE_CLK
 560         select INPUT_MATRIXKMAP
 561         help
 562           Say Y here if you want to use the keypad on your Samsung mobile
 563           device.
 564
 565           To compile this driver as a module, choose M here: the
 566           module will be called samsung-keypad.
 567
 568 config KEYBOARD_GOLDFISH_EVENTS
 569         depends on GOLDFISH || COMPILE_TEST
 570         tristate "Generic Input Event device for Goldfish"
 571         help
 572           Say Y here to get an input event device for the Goldfish virtual
 573           device emulator.
 574
 575           To compile this driver as a module, choose M here: the
 576           module will be called goldfish-events.
 577
 578 config KEYBOARD_STOWAWAY
 579         tristate "Stowaway keyboard"
 580         select SERIO
 581         help
 582           Say Y here if you have a Stowaway keyboard on a serial port.
 583           Stowaway compatible keyboards like Dicota Input-PDA keyboard
 584           are also supported by this driver.
 585
 586           To compile this driver as a module, choose M here: the
 587           module will be called stowaway.
 588
 589 config KEYBOARD_ST_KEYSCAN
 590         tristate "STMicroelectronics keyscan support"
 591         depends on ARCH_STI || COMPILE_TEST
 592         select INPUT_MATRIXKMAP
 593         help
 594           Say Y here if you want to use a keypad attached to the keyscan block
 595           on some STMicroelectronics SoC devices.
 596
 597           To compile this driver as a module, choose M here: the
 598           module will be called st-keyscan.
 599
 600 config KEYBOARD_SUNKBD
 601         tristate "Sun Type 4 and Type 5 keyboard"
 602         select SERIO
 603         help
 604           Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
 605           connected either to the Sun keyboard connector or to an serial
 606           (RS-232) port via a simple adapter.
 607
 608           To compile this driver as a module, choose M here: the
 609           module will be called sunkbd.
 610
 611 config KEYBOARD_SH_KEYSC
 612         tristate "SuperH KEYSC keypad support"
 613         depends on ARCH_SHMOBILE || COMPILE_TEST
 614         help
 615           Say Y here if you want to use a keypad attached to the KEYSC block
 616           on SuperH processors such as sh7722 and sh7343.
 617
 618           To compile this driver as a module, choose M here: the
 619           module will be called sh_keysc.
 620
 621 config KEYBOARD_STMPE
 622         tristate "STMPE keypad support"
 623         depends on MFD_STMPE
 624         depends on OF
 625         select INPUT_MATRIXKMAP
 626         help
 627           Say Y here if you want to use the keypad controller on STMPE I/O
 628           expanders.
 629
 630           To compile this driver as a module, choose M here: the module will be
 631           called stmpe-keypad.
 632
 633 config KEYBOARD_SUN4I_LRADC
 634         tristate "Allwinner sun4i low res adc attached tablet keys support"
 635         depends on ARCH_SUNXI
 636         help
 637           This selects support for the Allwinner low res adc attached tablet
 638           keys found on Allwinner sunxi SoCs.
 639
 640           To compile this driver as a module, choose M here: the
 641           module will be called sun4i-lradc-keys.
 642
 643 config KEYBOARD_DAVINCI
 644         tristate "TI DaVinci Key Scan"
 645         depends on ARCH_DAVINCI_DM365
 646         help
 647           Say Y to enable keypad module support for the TI DaVinci
 648           platforms (DM365).
 649
 650           To compile this driver as a module, choose M here: the
 651           module will be called davinci_keyscan.
 652
 653 config KEYBOARD_IPAQ_MICRO
 654         tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
 655         depends on MFD_IPAQ_MICRO
 656         help
 657           Say Y to enable support for the buttons attached to
 658           Micro peripheral controller on iPAQ h3100/h3600/h3700
 659
 660           To compile this driver as a module, choose M here: the
 661           module will be called ipaq-micro-keys.
 662
 663 config KEYBOARD_IQS62X
 664         tristate "Azoteq IQS620A/621/622/624/625 keys and switches"
 665         depends on MFD_IQS62X
 666         help
 667           Say Y here to enable key and switch support for the Azoteq IQS620A,
 668           IQS621, IQS622, IQS624 and IQS625 multi-function sensors.
 669
 670           To compile this driver as a module, choose M here: the module will
 671           be called iqs62x-keys.
 672
 673 config KEYBOARD_OMAP
 674         tristate "TI OMAP keypad support"
 675         depends on ARCH_OMAP1
 676         select INPUT_MATRIXKMAP
 677         help
 678           Say Y here if you want to use the OMAP keypad.
 679
 680           To compile this driver as a module, choose M here: the
 681           module will be called omap-keypad.
 682
 683 config KEYBOARD_OMAP4
 684         tristate "TI OMAP4+ keypad support"
 685         depends on (OF && HAS_IOMEM) || ARCH_OMAP2PLUS
 686         select INPUT_MATRIXKMAP
 687         help
 688           Say Y here if you want to use the OMAP4+ keypad.
 689
 690           To compile this driver as a module, choose M here: the
 691           module will be called omap4-keypad.
 692
 693 config KEYBOARD_SPEAR
 694         tristate "ST SPEAR keyboard support"
 695         depends on PLAT_SPEAR
 696         select INPUT_MATRIXKMAP
 697         help
 698           Say Y here if you want to use the SPEAR keyboard.
 699
 700           To compile this driver as a module, choose M here: the
 701           module will be called spear-keyboard.
 702
 703 config KEYBOARD_TC3589X
 704         tristate "TC3589X Keypad support"
 705         depends on MFD_TC3589X
 706         select INPUT_MATRIXKMAP
 707         help
 708           Say Y here if you want to use the keypad controller on
 709           TC35892/3 I/O expander.
 710
 711           To compile this driver as a module, choose M here: the
 712           module will be called tc3589x-keypad.
 713
 714 config KEYBOARD_TM2_TOUCHKEY
 715         tristate "TM2 touchkey support"
 716         depends on I2C
 717         depends on LEDS_CLASS
 718         help
 719           Say Y here to enable device driver for tm2-touchkey with
 720           LED control for the Exynos5433 TM2 board.
 721
 722           To compile this driver as a module, choose M here.
 723           module will be called tm2-touchkey.
 724
 725 config KEYBOARD_TWL4030
 726         tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
 727         depends on TWL4030_CORE
 728         select INPUT_MATRIXKMAP
 729         help
 730           Say Y here if your board use the keypad controller on
 731           TWL4030 family chips.  It's safe to say enable this
 732           even on boards that don't use the keypad controller.
 733
 734           To compile this driver as a module, choose M here: the
 735           module will be called twl4030_keypad.
 736
 737 config KEYBOARD_XTKBD
 738         tristate "XT keyboard"
 739         select SERIO
 740         help
 741           Say Y here if you want to use the old IBM PC/XT keyboard (or
 742           compatible) on your system. This is only possible with a
 743           parallel port keyboard adapter, you cannot connect it to the
 744           keyboard port on a PC that runs Linux.
 745
 746           To compile this driver as a module, choose M here: the
 747           module will be called xtkbd.
 748
 749 config KEYBOARD_CROS_EC
 750         tristate "ChromeOS EC keyboard"
 751         select INPUT_MATRIXKMAP
 752         depends on CROS_EC
 753         help
 754           Say Y here to enable the matrix keyboard used by ChromeOS devices
 755           and implemented on the ChromeOS EC. You must enable one bus option
 756           (CROS_EC_I2C or CROS_EC_SPI) to use this.
 757
 758           To compile this driver as a module, choose M here: the
 759           module will be called cros_ec_keyb.
 760
 761 config KEYBOARD_CAP11XX
 762         tristate "Microchip CAP11XX based touch sensors"
 763         depends on OF && I2C
 764         select REGMAP_I2C
 765         help
 766           Say Y here to enable the CAP11XX touch sensor driver.
 767
 768           To compile this driver as a module, choose M here: the
 769           module will be called cap11xx.
 770
 771 config KEYBOARD_BCM
 772         tristate "Broadcom keypad driver"
 773         depends on OF && HAVE_CLK && HAS_IOMEM
 774         select INPUT_MATRIXKMAP
 775         default ARCH_BCM_CYGNUS
 776         help
 777           Say Y here if you want to use Broadcom keypad.
 778
 779           To compile this driver as a module, choose M here: the
 780           module will be called bcm-keypad.
 781
 782 config KEYBOARD_MTK_PMIC
 783         tristate "MediaTek PMIC keys support"
 784         depends on MFD_MT6397
 785         help
 786           Say Y here if you want to use the pmic keys (powerkey/homekey).
 787
 788           To compile this driver as a module, choose M here: the
 789           module will be called pmic-keys.
 790
 791 endif