drivers/input/keyboard/Kconfig

   1 #
   2 # Input core configuration
   3 #
   4 menuconfig INPUT_KEYBOARD
   5         bool "Keyboards" if EMBEDDED || !X86
   6         default y
   7         help
   8           Say Y here, and a list of supported keyboards will be displayed.
   9           This option doesn't affect the kernel.
  10
  11           If unsure, say Y.
  12
  13 if INPUT_KEYBOARD
  14
  15 config KEYBOARD_ATKBD
  16         tristate "AT keyboard" if EMBEDDED || !X86_PC
  17         default y
  18         select SERIO
  19         select SERIO_LIBPS2
  20         select SERIO_I8042 if X86_PC
  21         select SERIO_GSCPS2 if GSC
  22         help
  23           Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
  24           you'll need this, unless you have a different type keyboard (USB, ADB
  25           or other). This also works for AT and PS/2 keyboards connected over a
  26           PS/2 to serial converter.
  27
  28           If unsure, say Y.
  29
  30           To compile this driver as a module, choose M here: the
  31           module will be called atkbd.
  32
  33 config KEYBOARD_ATKBD_HP_KEYCODES
  34         bool "Use HP keyboard scancodes"
  35         depends on PARISC && KEYBOARD_ATKBD
  36         default y
  37         help
  38           Say Y here if you have a PA-RISC machine and want to use an AT or
  39           PS/2 keyboard, and your keyboard uses keycodes that are specific to
  40           PA-RISC keyboards.
  41
  42           Say N if you use a standard keyboard.
  43
  44 config KEYBOARD_ATKBD_RDI_KEYCODES
  45         bool "Use PrecisionBook keyboard scancodes"
  46         depends on KEYBOARD_ATKBD_HP_KEYCODES
  47         default n
  48         help
  49           If you have an RDI PrecisionBook, say Y here if you want to use its
  50           built-in keyboard (as opposed to an external keyboard).
  51
  52           The PrecisionBook has five keys that conflict with those used by most
  53           AT and PS/2 keyboards. These are as follows:
  54
  55             PrecisionBook    Standard AT or PS/2
  56
  57             F1               F12
  58             Left Ctrl        Left Alt
  59             Caps Lock        Left Ctrl
  60             Right Ctrl       Caps Lock
  61             Left             102nd key (the key to the right of Left Shift)
  62
  63           If you say N here, and use the PrecisionBook keyboard, then each key
  64           in the left-hand column will be interpreted as the corresponding key
  65           in the right-hand column.
  66
  67           If you say Y here, and use an external keyboard, then each key in the
  68           right-hand column will be interpreted as the key shown in the
  69           left-hand column.
  70
  71 config KEYBOARD_SUNKBD
  72         tristate "Sun Type 4 and Type 5 keyboard"
  73         select SERIO
  74         help
  75           Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
  76           connected either to the Sun keyboard connector or to an serial
  77           (RS-232) port via a simple adapter.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called sunkbd.
  81
  82 config KEYBOARD_LKKBD
  83         tristate "DECstation/VAXstation LK201/LK401 keyboard"
  84         select SERIO
  85         help
  86           Say Y here if you want to use a LK201 or LK401 style serial
  87           keyboard. This keyboard is also useable on PCs if you attach
  88           it with the inputattach program. The connector pinout is
  89           described within lkkbd.c.
  90
  91           To compile this driver as a module, choose M here: the
  92           module will be called lkkbd.
  93
  94 config KEYBOARD_LOCOMO
  95         tristate "LoCoMo Keyboard Support"
  96         depends on SHARP_LOCOMO && INPUT_KEYBOARD
  97         help
  98           Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
  99
 100           To compile this driver as a module, choose M here: the
 101           module will be called locomokbd.
 102
 103 config KEYBOARD_XTKBD
 104         tristate "XT keyboard"
 105         select SERIO
 106         help
 107           Say Y here if you want to use the old IBM PC/XT keyboard (or
 108           compatible) on your system. This is only possible with a
 109           parallel port keyboard adapter, you cannot connect it to the
 110           keyboard port on a PC that runs Linux.
 111
 112           To compile this driver as a module, choose M here: the
 113           module will be called xtkbd.
 114
 115 config KEYBOARD_NEWTON
 116         tristate "Newton keyboard"
 117         select SERIO
 118         help
 119           Say Y here if you have a Newton keyboard on a serial port.
 120
 121           To compile this driver as a module, choose M here: the
 122           module will be called newtonkbd.
 123
 124 config KEYBOARD_STOWAWAY
 125         tristate "Stowaway keyboard"
 126         select SERIO
 127         help
 128           Say Y here if you have a Stowaway keyboard on a serial port.
 129           Stowaway compatible keyboards like Dicota Input-PDA keyboard
 130           are also supported by this driver.
 131
 132           To compile this driver as a module, choose M here: the
 133           module will be called stowaway.
 134
 135 config KEYBOARD_CORGI
 136         tristate "Corgi keyboard"
 137         depends on PXA_SHARPSL
 138         default y
 139         help
 140           Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
 141           series of PDAs.
 142
 143           To compile this driver as a module, choose M here: the
 144           module will be called corgikbd.
 145
 146 config KEYBOARD_SPITZ
 147         tristate "Spitz keyboard"
 148         depends on PXA_SHARPSL
 149         default y
 150         help
 151           Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
 152           SL-C3000 and Sl-C3100 series of PDAs.
 153
 154           To compile this driver as a module, choose M here: the
 155           module will be called spitzkbd.
 156
 157 config KEYBOARD_AMIGA
 158         tristate "Amiga keyboard"
 159         depends on AMIGA
 160         help
 161           Say Y here if you are running Linux on any AMIGA and have a keyboard
 162           attached.
 163
 164           To compile this driver as a module, choose M here: the
 165           module will be called amikbd.
 166
 167 config KEYBOARD_ATARI
 168         tristate "Atari keyboard"
 169         depends on ATARI
 170         select ATARI_KBD_CORE
 171         help
 172           Say Y here if you are running Linux on any Atari and have a keyboard
 173           attached.
 174
 175           To compile this driver as a module, choose M here: the
 176           module will be called atakbd.
 177
 178 config KEYBOARD_HIL_OLD
 179         tristate "HP HIL keyboard support (simple driver)"
 180         depends on GSC || HP300
 181         default y
 182         help
 183           The "Human Interface Loop" is a older, 8-channel USB-like
 184           controller used in several Hewlett Packard models. This driver
 185           was adapted from the one written for m68k/hp300, and implements
 186           support for a keyboard attached to the HIL port, but not for
 187           any other types of HIL input devices like mice or tablets.
 188           However, it has been thoroughly tested and is stable.
 189
 190           If you want full HIL support including support for multiple
 191           keyboards, mice, and tablets, you have to enable the
 192           "HP System Device Controller i8042 Support" in the input/serio
 193           submenu.
 194
 195 config KEYBOARD_HIL
 196         tristate "HP HIL keyboard support"
 197         depends on GSC || HP300
 198         default y
 199         select HP_SDC
 200         select HIL_MLC
 201         select SERIO
 202         help
 203           The "Human Interface Loop" is a older, 8-channel USB-like
 204           controller used in several Hewlett Packard models.
 205           This driver implements support for HIL-keyboards attached
 206           to your machine, so normally you should say Y here.
 207
 208 config KEYBOARD_OMAP
 209         tristate "TI OMAP keypad support"
 210         depends on (ARCH_OMAP1 || ARCH_OMAP2)
 211         help
 212           Say Y here if you want to use the OMAP keypad.
 213
 214           To compile this driver as a module, choose M here: the
 215           module will be called omap-keypad.
 216
 217 config KEYBOARD_PXA27x
 218         tristate "PXA27x keyboard support"
 219         depends on PXA27x
 220         help
 221           Enable support for PXA27x matrix keyboard controller
 222
 223           To compile this driver as a module, choose M here: the
 224           module will be called pxa27x_keyboard.
 225
 226 config KEYBOARD_AAED2000
 227         tristate "AAED-2000 keyboard"
 228         depends on MACH_AAED2000
 229         select INPUT_POLLDEV
 230         default y
 231         help
 232           Say Y here to enable the keyboard on the Agilent AAED-2000
 233           development board.
 234
 235           To compile this driver as a module, choose M here: the
 236           module will be called aaed2000_kbd.
 237
 238 config KEYBOARD_GPIO
 239         tristate "GPIO Buttons"
 240         depends on GENERIC_GPIO
 241         help
 242           This driver implements support for buttons connected
 243           to GPIO pins of various CPUs (and some other chips).
 244
 245           Say Y here if your device has buttons connected
 246           directly to such GPIO pins.  Your board-specific
 247           setup logic must also provide a platform device,
 248           with configuration data saying which GPIOs are used.
 249
 250           To compile this driver as a module, choose M here: the
 251           module will be called gpio-keys.
 252
 253 endif