drivers/input/keyboard/Kconfig

   1 #
   2 # Input core configuration
   3 #
   4 menuconfig INPUT_KEYBOARD
   5         bool "Keyboards" if EMBEDDED || !X86
   6         default y
   7         help
   8           Say Y here, and a list of supported keyboards will be displayed.
   9           This option doesn't affect the kernel.
  10
  11           If unsure, say Y.
  12
  13 if INPUT_KEYBOARD
  14
  15 config KEYBOARD_ATKBD
  16         tristate "AT keyboard" if EMBEDDED || !X86_PC
  17         default y
  18         select SERIO
  19         select SERIO_LIBPS2
  20         select SERIO_I8042 if X86_PC
  21         select SERIO_GSCPS2 if GSC
  22         help
  23           Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
  24           you'll need this, unless you have a different type keyboard (USB, ADB
  25           or other). This also works for AT and PS/2 keyboards connected over a
  26           PS/2 to serial converter.
  27
  28           If unsure, say Y.
  29
  30           To compile this driver as a module, choose M here: the
  31           module will be called atkbd.
  32
  33 config KEYBOARD_ATKBD_HP_KEYCODES
  34         bool "Use HP keyboard scancodes"
  35         depends on PARISC && KEYBOARD_ATKBD
  36         default y
  37         help
  38           Say Y here if you have a PA-RISC machine and want to use an AT or
  39           PS/2 keyboard, and your keyboard uses keycodes that are specific to
  40           PA-RISC keyboards.
  41
  42           Say N if you use a standard keyboard.
  43
  44 config KEYBOARD_ATKBD_RDI_KEYCODES
  45         bool "Use PrecisionBook keyboard scancodes"
  46         depends on KEYBOARD_ATKBD_HP_KEYCODES
  47         default n
  48         help
  49           If you have an RDI PrecisionBook, say Y here if you want to use its
  50           built-in keyboard (as opposed to an external keyboard).
  51
  52           The PrecisionBook has five keys that conflict with those used by most
  53           AT and PS/2 keyboards. These are as follows:
  54
  55             PrecisionBook    Standard AT or PS/2
  56
  57             F1               F12
  58             Left Ctrl        Left Alt
  59             Caps Lock        Left Ctrl
  60             Right Ctrl       Caps Lock
  61             Left             102nd key (the key to the right of Left Shift)
  62
  63           If you say N here, and use the PrecisionBook keyboard, then each key
  64           in the left-hand column will be interpreted as the corresponding key
  65           in the right-hand column.
  66
  67           If you say Y here, and use an external keyboard, then each key in the
  68           right-hand column will be interpreted as the key shown in the
  69           left-hand column.
  70
  71 config KEYBOARD_SUNKBD
  72         tristate "Sun Type 4 and Type 5 keyboard"
  73         select SERIO
  74         help
  75           Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
  76           connected either to the Sun keyboard connector or to an serial
  77           (RS-232) port via a simple adapter.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called sunkbd.
  81
  82 config KEYBOARD_LKKBD
  83         tristate "DECstation/VAXstation LK201/LK401 keyboard"
  84         select SERIO
  85         help
  86           Say Y here if you want to use a LK201 or LK401 style serial
  87           keyboard. This keyboard is also useable on PCs if you attach
  88           it with the inputattach program. The connector pinout is
  89           described within lkkbd.c.
  90
  91           To compile this driver as a module, choose M here: the
  92           module will be called lkkbd.
  93
  94 config KEYBOARD_LOCOMO
  95         tristate "LoCoMo Keyboard Support"
  96         depends on SHARP_LOCOMO && INPUT_KEYBOARD
  97         help
  98           Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
  99
 100           To compile this driver as a module, choose M here: the
 101           module will be called locomokbd.
 102
 103 config KEYBOARD_XTKBD
 104         tristate "XT keyboard"
 105         select SERIO
 106         help
 107           Say Y here if you want to use the old IBM PC/XT keyboard (or
 108           compatible) on your system. This is only possible with a
 109           parallel port keyboard adapter, you cannot connect it to the
 110           keyboard port on a PC that runs Linux.
 111
 112           To compile this driver as a module, choose M here: the
 113           module will be called xtkbd.
 114
 115 config KEYBOARD_NEWTON
 116         tristate "Newton keyboard"
 117         select SERIO
 118         help
 119           Say Y here if you have a Newton keyboard on a serial port.
 120
 121           To compile this driver as a module, choose M here: the
 122           module will be called newtonkbd.
 123
 124 config KEYBOARD_STOWAWAY
 125         tristate "Stowaway keyboard"
 126         select SERIO
 127         help
 128           Say Y here if you have a Stowaway keyboard on a serial port.
 129           Stowaway compatible keyboards like Dicota Input-PDA keyboard
 130           are also supported by this driver.
 131
 132           To compile this driver as a module, choose M here: the
 133           module will be called stowaway.
 134
 135 config KEYBOARD_CORGI
 136         tristate "Corgi keyboard"
 137         depends on PXA_SHARPSL
 138         default y
 139         help
 140           Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
 141           series of PDAs.
 142
 143           To compile this driver as a module, choose M here: the
 144           module will be called corgikbd.
 145
 146 config KEYBOARD_SPITZ
 147         tristate "Spitz keyboard"
 148         depends on PXA_SHARPSL
 149         default y
 150         help
 151           Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
 152           SL-C3000 and Sl-C3100 series of PDAs.
 153
 154           To compile this driver as a module, choose M here: the
 155           module will be called spitzkbd.
 156
 157 config KEYBOARD_AMIGA
 158         tristate "Amiga keyboard"
 159         depends on AMIGA
 160         help
 161           Say Y here if you are running Linux on any AMIGA and have a keyboard
 162           attached.
 163
 164           To compile this driver as a module, choose M here: the
 165           module will be called amikbd.
 166
 167 config ATARI_KBD_CORE
 168         bool
 169
 170 config KEYBOARD_ATARI
 171         tristate "Atari keyboard"
 172         depends on ATARI
 173         select ATARI_KBD_CORE
 174         help
 175           Say Y here if you are running Linux on any Atari and have a keyboard
 176           attached.
 177
 178           To compile this driver as a module, choose M here: the
 179           module will be called atakbd.
 180
 181 config KEYBOARD_HIL_OLD
 182         tristate "HP HIL keyboard support (simple driver)"
 183         depends on GSC || HP300
 184         default y
 185         help
 186           The "Human Interface Loop" is a older, 8-channel USB-like
 187           controller used in several Hewlett Packard models. This driver
 188           was adapted from the one written for m68k/hp300, and implements
 189           support for a keyboard attached to the HIL port, but not for
 190           any other types of HIL input devices like mice or tablets.
 191           However, it has been thoroughly tested and is stable.
 192
 193           If you want full HIL support including support for multiple
 194           keyboards, mice, and tablets, you have to enable the
 195           "HP System Device Controller i8042 Support" in the input/serio
 196           submenu.
 197
 198 config KEYBOARD_HIL
 199         tristate "HP HIL keyboard support"
 200         depends on GSC || HP300
 201         default y
 202         select HP_SDC
 203         select HIL_MLC
 204         select SERIO
 205         help
 206           The "Human Interface Loop" is a older, 8-channel USB-like
 207           controller used in several Hewlett Packard models.
 208           This driver implements support for HIL-keyboards attached
 209           to your machine, so normally you should say Y here.
 210
 211 config KEYBOARD_OMAP
 212         tristate "TI OMAP keypad support"
 213         depends on (ARCH_OMAP1 || ARCH_OMAP2)
 214         help
 215           Say Y here if you want to use the OMAP keypad.
 216
 217           To compile this driver as a module, choose M here: the
 218           module will be called omap-keypad.
 219
 220 config KEYBOARD_PXA27x
 221         tristate "PXA27x keyboard support"
 222         depends on PXA27x
 223         help
 224           Enable support for PXA27x matrix keyboard controller
 225
 226           To compile this driver as a module, choose M here: the
 227           module will be called pxa27x_keyboard.
 228
 229 config KEYBOARD_AAED2000
 230         tristate "AAED-2000 keyboard"
 231         depends on MACH_AAED2000
 232         select INPUT_POLLDEV
 233         default y
 234         help
 235           Say Y here to enable the keyboard on the Agilent AAED-2000
 236           development board.
 237
 238           To compile this driver as a module, choose M here: the
 239           module will be called aaed2000_kbd.
 240
 241 config KEYBOARD_GPIO
 242         tristate "GPIO Buttons"
 243         depends on GENERIC_GPIO
 244         help
 245           This driver implements support for buttons connected
 246           to GPIO pins of various CPUs (and some other chips).
 247
 248           Say Y here if your device has buttons connected
 249           directly to such GPIO pins.  Your board-specific
 250           setup logic must also provide a platform device,
 251           with configuration data saying which GPIOs are used.
 252
 253           To compile this driver as a module, choose M here: the
 254           module will be called gpio-keys.
 255
 256 endif