drivers/input/keyboard/qt1050.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  *  Microchip AT42QT1050 QTouch Sensor Controller
   4  *
   5  *  Copyright (C) 2019 Pengutronix, Marco Felsch <kernel@pengutronix.de>
   6  *
   7  *  Base on AT42QT1070 driver by:
   8  *  Bo Shen <voice.shen@atmel.com>
   9  *  Copyright (C) 2011 Atmel
  10  */
  11
  12 #include <linux/delay.h>
  13 #include <linux/i2c.h>
  14 #include <linux/input.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/kernel.h>
  17 #include <linux/log2.h>
  18 #include <linux/module.h>
  19 #include <linux/of.h>
  20 #include <linux/regmap.h>
  21
  22 /* Chip ID */
  23 #define QT1050_CHIP_ID          0x00
  24 #define QT1050_CHIP_ID_VER      0x46
  25
  26 /* Firmware version */
  27 #define QT1050_FW_VERSION       0x01
  28
  29 /* Detection status */
  30 #define QT1050_DET_STATUS       0x02
  31
  32 /* Key status */
  33 #define QT1050_KEY_STATUS       0x03
  34
  35 /* Key Signals */
  36 #define QT1050_KEY_SIGNAL_0_MSB 0x06
  37 #define QT1050_KEY_SIGNAL_0_LSB 0x07
  38 #define QT1050_KEY_SIGNAL_1_MSB 0x08
  39 #define QT1050_KEY_SIGNAL_1_LSB 0x09
  40 #define QT1050_KEY_SIGNAL_2_MSB 0x0c
  41 #define QT1050_KEY_SIGNAL_2_LSB 0x0d
  42 #define QT1050_KEY_SIGNAL_3_MSB 0x0e
  43 #define QT1050_KEY_SIGNAL_3_LSB 0x0f
  44 #define QT1050_KEY_SIGNAL_4_MSB 0x10
  45 #define QT1050_KEY_SIGNAL_4_LSB 0x11
  46
  47 /* Reference data */
  48 #define QT1050_REF_DATA_0_MSB   0x14
  49 #define QT1050_REF_DATA_0_LSB   0x15
  50 #define QT1050_REF_DATA_1_MSB   0x16
  51 #define QT1050_REF_DATA_1_LSB   0x17
  52 #define QT1050_REF_DATA_2_MSB   0x1a
  53 #define QT1050_REF_DATA_2_LSB   0x1b
  54 #define QT1050_REF_DATA_3_MSB   0x1c
  55 #define QT1050_REF_DATA_3_LSB   0x1d
  56 #define QT1050_REF_DATA_4_MSB   0x1e
  57 #define QT1050_REF_DATA_4_LSB   0x1f
  58
  59 /* Negative threshold level */
  60 #define QT1050_NTHR_0           0x21
  61 #define QT1050_NTHR_1           0x22
  62 #define QT1050_NTHR_2           0x24
  63 #define QT1050_NTHR_3           0x25
  64 #define QT1050_NTHR_4           0x26
  65
  66 /* Pulse / Scale  */
  67 #define QT1050_PULSE_SCALE_0    0x28
  68 #define QT1050_PULSE_SCALE_1    0x29
  69 #define QT1050_PULSE_SCALE_2    0x2b
  70 #define QT1050_PULSE_SCALE_3    0x2c
  71 #define QT1050_PULSE_SCALE_4    0x2d
  72
  73 /* Detection integrator counter / AKS */
  74 #define QT1050_DI_AKS_0         0x2f
  75 #define QT1050_DI_AKS_1         0x30
  76 #define QT1050_DI_AKS_2         0x32
  77 #define QT1050_DI_AKS_3         0x33
  78 #define QT1050_DI_AKS_4         0x34
  79
  80 /* Charge Share Delay */
  81 #define QT1050_CSD_0            0x36
  82 #define QT1050_CSD_1            0x37
  83 #define QT1050_CSD_2            0x39
  84 #define QT1050_CSD_3            0x3a
  85 #define QT1050_CSD_4            0x3b
  86
  87 /* Low Power Mode */
  88 #define QT1050_LPMODE           0x3d
  89
  90 /* Calibration and Reset */
  91 #define QT1050_RES_CAL          0x3f
  92 #define QT1050_RES_CAL_RESET            BIT(7)
  93 #define QT1050_RES_CAL_CALIBRATE        BIT(1)
  94
  95 #define QT1050_MAX_KEYS         5
  96 #define QT1050_RESET_TIME       255
  97
  98 struct qt1050_key_regs {
  99         unsigned int nthr;
 100         unsigned int pulse_scale;
 101         unsigned int di_aks;
 102         unsigned int csd;
 103 };
 104
 105 struct qt1050_key {
 106         u32 num;
 107         u32 charge_delay;
 108         u32 thr_cnt;
 109         u32 samples;
 110         u32 scale;
 111         u32 keycode;
 112 };
 113
 114 struct qt1050_priv {
 115         struct i2c_client       *client;
 116         struct input_dev        *input;
 117         struct regmap           *regmap;
 118         struct qt1050_key       keys[QT1050_MAX_KEYS];
 119         unsigned short          keycodes[QT1050_MAX_KEYS];
 120         u8                      reg_keys;
 121         u8                      last_keys;
 122 };
 123
 124 static const struct qt1050_key_regs qt1050_key_regs_data[] = {
 125         {
 126                 .nthr = QT1050_NTHR_0,
 127                 .pulse_scale = QT1050_PULSE_SCALE_0,
 128                 .di_aks = QT1050_DI_AKS_0,
 129                 .csd = QT1050_CSD_0,
 130         }, {
 131                 .nthr = QT1050_NTHR_1,
 132                 .pulse_scale = QT1050_PULSE_SCALE_1,
 133                 .di_aks = QT1050_DI_AKS_1,
 134                 .csd = QT1050_CSD_1,
 135         }, {
 136                 .nthr = QT1050_NTHR_2,
 137                 .pulse_scale = QT1050_PULSE_SCALE_2,
 138                 .di_aks = QT1050_DI_AKS_2,
 139                 .csd = QT1050_CSD_2,
 140         }, {
 141                 .nthr = QT1050_NTHR_3,
 142                 .pulse_scale = QT1050_PULSE_SCALE_3,
 143                 .di_aks = QT1050_DI_AKS_3,
 144                 .csd = QT1050_CSD_3,
 145         }, {
 146                 .nthr = QT1050_NTHR_4,
 147                 .pulse_scale = QT1050_PULSE_SCALE_4,
 148                 .di_aks = QT1050_DI_AKS_4,
 149                 .csd = QT1050_CSD_4,
 150         }
 151 };
 152
 153 static bool qt1050_volatile_reg(struct device *dev, unsigned int reg)
 154 {
 155         switch (reg) {
 156         case QT1050_DET_STATUS:
 157         case QT1050_KEY_STATUS:
 158         case QT1050_KEY_SIGNAL_0_MSB:
 159         case QT1050_KEY_SIGNAL_0_LSB:
 160         case QT1050_KEY_SIGNAL_1_MSB:
 161         case QT1050_KEY_SIGNAL_1_LSB:
 162         case QT1050_KEY_SIGNAL_2_MSB:
 163         case QT1050_KEY_SIGNAL_2_LSB:
 164         case QT1050_KEY_SIGNAL_3_MSB:
 165         case QT1050_KEY_SIGNAL_3_LSB:
 166         case QT1050_KEY_SIGNAL_4_MSB:
 167         case QT1050_KEY_SIGNAL_4_LSB:
 168                 return true;
 169         default:
 170                 return false;
 171         }
 172 }
 173
 174 static const struct regmap_range qt1050_readable_ranges[] = {
 175         regmap_reg_range(QT1050_CHIP_ID, QT1050_KEY_STATUS),
 176         regmap_reg_range(QT1050_KEY_SIGNAL_0_MSB, QT1050_KEY_SIGNAL_1_LSB),
 177         regmap_reg_range(QT1050_KEY_SIGNAL_2_MSB, QT1050_KEY_SIGNAL_4_LSB),
 178         regmap_reg_range(QT1050_REF_DATA_0_MSB, QT1050_REF_DATA_1_LSB),
 179         regmap_reg_range(QT1050_REF_DATA_2_MSB, QT1050_REF_DATA_4_LSB),
 180         regmap_reg_range(QT1050_NTHR_0, QT1050_NTHR_1),
 181         regmap_reg_range(QT1050_NTHR_2, QT1050_NTHR_4),
 182         regmap_reg_range(QT1050_PULSE_SCALE_0, QT1050_PULSE_SCALE_1),
 183         regmap_reg_range(QT1050_PULSE_SCALE_2, QT1050_PULSE_SCALE_4),
 184         regmap_reg_range(QT1050_DI_AKS_0, QT1050_DI_AKS_1),
 185         regmap_reg_range(QT1050_DI_AKS_2, QT1050_DI_AKS_4),
 186         regmap_reg_range(QT1050_CSD_0, QT1050_CSD_1),
 187         regmap_reg_range(QT1050_CSD_2, QT1050_RES_CAL),
 188 };
 189
 190 static const struct regmap_access_table qt1050_readable_table = {
 191         .yes_ranges = qt1050_readable_ranges,
 192         .n_yes_ranges = ARRAY_SIZE(qt1050_readable_ranges),
 193 };
 194
 195 static const struct regmap_range qt1050_writeable_ranges[] = {
 196         regmap_reg_range(QT1050_NTHR_0, QT1050_NTHR_1),
 197         regmap_reg_range(QT1050_NTHR_2, QT1050_NTHR_4),
 198         regmap_reg_range(QT1050_PULSE_SCALE_0, QT1050_PULSE_SCALE_1),
 199         regmap_reg_range(QT1050_PULSE_SCALE_2, QT1050_PULSE_SCALE_4),
 200         regmap_reg_range(QT1050_DI_AKS_0, QT1050_DI_AKS_1),
 201         regmap_reg_range(QT1050_DI_AKS_2, QT1050_DI_AKS_4),
 202         regmap_reg_range(QT1050_CSD_0, QT1050_CSD_1),
 203         regmap_reg_range(QT1050_CSD_2, QT1050_RES_CAL),
 204 };
 205
 206 static const struct regmap_access_table qt1050_writeable_table = {
 207         .yes_ranges = qt1050_writeable_ranges,
 208         .n_yes_ranges = ARRAY_SIZE(qt1050_writeable_ranges),
 209 };
 210
 211 static struct regmap_config qt1050_regmap_config = {
 212         .reg_bits = 8,
 213         .val_bits = 8,
 214         .max_register = QT1050_RES_CAL,
 215
 216         .cache_type = REGCACHE_RBTREE,
 217
 218         .wr_table = &qt1050_writeable_table,
 219         .rd_table = &qt1050_readable_table,
 220         .volatile_reg = qt1050_volatile_reg,
 221 };
 222
 223 static bool qt1050_identify(struct qt1050_priv *ts)
 224 {
 225         unsigned int val;
 226         int err;
 227
 228         /* Read Chip ID */
 229         regmap_read(ts->regmap, QT1050_CHIP_ID, &val);
 230         if (val != QT1050_CHIP_ID_VER) {
 231                 dev_err(&ts->client->dev, "ID %d not supported\n", val);
 232                 return false;
 233         }
 234
 235         /* Read firmware version */
 236         err = regmap_read(ts->regmap, QT1050_FW_VERSION, &val);
 237         if (err) {
 238                 dev_err(&ts->client->dev, "could not read the firmware version\n");
 239                 return false;
 240         }
 241
 242         dev_info(&ts->client->dev, "AT42QT1050 firmware version %1d.%1d\n",
 243                  val >> 4, val & 0xf);
 244
 245         return true;
 246 }
 247
 248 static irqreturn_t qt1050_irq_threaded(int irq, void *dev_id)
 249 {
 250         struct qt1050_priv *ts = dev_id;
 251         struct input_dev *input = ts->input;
 252         unsigned long new_keys, changed;
 253         unsigned int val;
 254         int i, err;
 255
 256         /* Read the detected status register, thus clearing interrupt */
 257         err = regmap_read(ts->regmap, QT1050_DET_STATUS, &val);
 258         if (err) {
 259                 dev_err(&ts->client->dev, "Fail to read detection status: %d\n",
 260                         err);
 261                 return IRQ_NONE;
 262         }
 263
 264         /* Read which key changed, keys are not continuous */
 265         err = regmap_read(ts->regmap, QT1050_KEY_STATUS, &val);
 266         if (err) {
 267                 dev_err(&ts->client->dev,
 268                         "Fail to determine the key status: %d\n", err);
 269                 return IRQ_NONE;
 270         }
 271         new_keys = (val & 0x70) >> 2 | (val & 0x6) >> 1;
 272         changed = ts->last_keys ^ new_keys;
 273         /* Report registered keys only */
 274         changed &= ts->reg_keys;
 275
 276         for_each_set_bit(i, &changed, QT1050_MAX_KEYS)
 277                 input_report_key(input, ts->keys[i].keycode,
 278                                  test_bit(i, &new_keys));
 279
 280         ts->last_keys = new_keys;
 281         input_sync(input);
 282
 283         return IRQ_HANDLED;
 284 }
 285
 286 static const struct qt1050_key_regs *qt1050_get_key_regs(int key_num)
 287 {
 288         return &qt1050_key_regs_data[key_num];
 289 }
 290
 291 static int qt1050_set_key(struct regmap *map, int number, int on)
 292 {
 293         const struct qt1050_key_regs *key_regs;
 294
 295         key_regs = qt1050_get_key_regs(number);
 296
 297         return regmap_update_bits(map, key_regs->di_aks, 0xfc,
 298                                   on ? BIT(4) : 0x00);
 299 }
 300
 301 static int qt1050_apply_fw_data(struct qt1050_priv *ts)
 302 {
 303         struct regmap *map = ts->regmap;
 304         struct qt1050_key *button = &ts->keys[0];
 305         const struct qt1050_key_regs *key_regs;
 306         int i, err;
 307
 308         /* Disable all keys and enable only the specified ones */
 309         for (i = 0; i < QT1050_MAX_KEYS; i++) {
 310                 err = qt1050_set_key(map, i, 0);
 311                 if (err)
 312                         return err;
 313         }
 314
 315         for (i = 0; i < QT1050_MAX_KEYS; i++, button++) {
 316                 /* Keep KEY_RESERVED keys off */
 317                 if (button->keycode == KEY_RESERVED)
 318                         continue;
 319
 320                 err = qt1050_set_key(map, button->num, 1);
 321                 if (err)
 322                         return err;
 323
 324                 key_regs = qt1050_get_key_regs(button->num);
 325
 326                 err = regmap_write(map, key_regs->pulse_scale,
 327                                    (button->samples << 4) | (button->scale));
 328                 if (err)
 329                         return err;
 330                 err = regmap_write(map, key_regs->csd, button->charge_delay);
 331                 if (err)
 332                         return err;
 333                 err = regmap_write(map, key_regs->nthr, button->thr_cnt);
 334                 if (err)
 335                         return err;
 336         }
 337
 338         return 0;
 339 }
 340
 341 static int qt1050_parse_fw(struct qt1050_priv *ts)
 342 {
 343         struct device *dev = &ts->client->dev;
 344         struct fwnode_handle *child;
 345         int nbuttons;
 346
 347         nbuttons = device_get_child_node_count(dev);
 348         if (nbuttons == 0 || nbuttons > QT1050_MAX_KEYS)
 349                 return -ENODEV;
 350
 351         device_for_each_child_node(dev, child) {
 352                 struct qt1050_key button;
 353
 354                 /* Required properties */
 355                 if (fwnode_property_read_u32(child, "linux,code",
 356                                              &button.keycode)) {
 357                         dev_err(dev, "Button without keycode\n");
 358                         goto err;
 359                 }
 360                 if (button.keycode >= KEY_MAX) {
 361                         dev_err(dev, "Invalid keycode 0x%x\n",
 362                                 button.keycode);
 363                         goto err;
 364                 }
 365
 366                 if (fwnode_property_read_u32(child, "reg",
 367                                              &button.num)) {
 368                         dev_err(dev, "Button without pad number\n");
 369                         goto err;
 370                 }
 371                 if (button.num < 0 || button.num > QT1050_MAX_KEYS - 1)
 372                         goto err;
 373
 374                 ts->reg_keys |= BIT(button.num);
 375
 376                 /* Optional properties */
 377                 if (fwnode_property_read_u32(child,
 378                                              "microchip,pre-charge-time-ns",
 379                                              &button.charge_delay)) {
 380                         button.charge_delay = 0;
 381                 } else {
 382                         if (button.charge_delay % 2500 == 0)
 383                                 button.charge_delay =
 384                                         button.charge_delay / 2500;
 385                         else
 386                                 button.charge_delay = 0;
 387                 }
 388
 389                 if (fwnode_property_read_u32(child, "microchip,average-samples",
 390                                          &button.samples)) {
 391                         button.samples = 0;
 392                 } else {
 393                         if (is_power_of_2(button.samples))
 394                                 button.samples = ilog2(button.samples);
 395                         else
 396                                 button.samples = 0;
 397                 }
 398
 399                 if (fwnode_property_read_u32(child, "microchip,average-scaling",
 400                                              &button.scale)) {
 401                         button.scale = 0;
 402                 } else {
 403                         if (is_power_of_2(button.scale))
 404                                 button.scale = ilog2(button.scale);
 405                         else
 406                                 button.scale = 0;
 407
 408                 }
 409
 410                 if (fwnode_property_read_u32(child, "microchip,threshold",
 411                                          &button.thr_cnt)) {
 412                         button.thr_cnt = 20;
 413                 } else {
 414                         if (button.thr_cnt > 255)
 415                                 button.thr_cnt = 20;
 416                 }
 417
 418                 ts->keys[button.num] = button;
 419         }
 420
 421         return 0;
 422
 423 err:
 424         fwnode_handle_put(child);
 425         return -EINVAL;
 426 }
 427
 428 static int qt1050_probe(struct i2c_client *client)
 429 {
 430         struct qt1050_priv *ts;
 431         struct input_dev *input;
 432         struct device *dev = &client->dev;
 433         struct regmap *map;
 434         unsigned int status, i;
 435         int err;
 436
 437         /* Check basic functionality */
 438         err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE);
 439         if (!err) {
 440                 dev_err(&client->dev, "%s adapter not supported\n",
 441                         dev_driver_string(&client->adapter->dev));
 442                 return -ENODEV;
 443         }
 444
 445         if (!client->irq) {
 446                 dev_err(dev, "assign a irq line to this device\n");
 447                 return -EINVAL;
 448         }
 449
 450         ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
 451         if (!ts)
 452                 return -ENOMEM;
 453
 454         input = devm_input_allocate_device(dev);
 455         if (!input)
 456                 return -ENOMEM;
 457
 458         map = devm_regmap_init_i2c(client, &qt1050_regmap_config);
 459         if (IS_ERR(map))
 460                 return PTR_ERR(map);
 461
 462         ts->client = client;
 463         ts->input = input;
 464         ts->regmap = map;
 465
 466         i2c_set_clientdata(client, ts);
 467
 468         /* Identify the qt1050 chip */
 469         if (!qt1050_identify(ts))
 470                 return -ENODEV;
 471
 472         /* Get pdata */
 473         err = qt1050_parse_fw(ts);
 474         if (err) {
 475                 dev_err(dev, "Failed to parse firmware: %d\n", err);
 476                 return err;
 477         }
 478
 479         input->name = "AT42QT1050 QTouch Sensor";
 480         input->dev.parent = &client->dev;
 481         input->id.bustype = BUS_I2C;
 482
 483         /* Add the keycode */
 484         input->keycode = ts->keycodes;
 485         input->keycodesize = sizeof(ts->keycodes[0]);
 486         input->keycodemax = QT1050_MAX_KEYS;
 487
 488         __set_bit(EV_KEY, input->evbit);
 489         for (i = 0; i < QT1050_MAX_KEYS; i++) {
 490                 ts->keycodes[i] = ts->keys[i].keycode;
 491                 __set_bit(ts->keycodes[i], input->keybit);
 492         }
 493
 494         /* Trigger re-calibration */
 495         err = regmap_update_bits(ts->regmap, QT1050_RES_CAL, 0x7f,
 496                                  QT1050_RES_CAL_CALIBRATE);
 497         if (err) {
 498                 dev_err(dev, "Trigger calibration failed: %d\n", err);
 499                 return err;
 500         }
 501         err = regmap_read_poll_timeout(ts->regmap, QT1050_DET_STATUS, status,
 502                                  status >> 7 == 1, 10000, 200000);
 503         if (err) {
 504                 dev_err(dev, "Calibration failed: %d\n", err);
 505                 return err;
 506         }
 507
 508         /* Soft reset to set defaults */
 509         err = regmap_update_bits(ts->regmap, QT1050_RES_CAL,
 510                                  QT1050_RES_CAL_RESET, QT1050_RES_CAL_RESET);
 511         if (err) {
 512                 dev_err(dev, "Trigger soft reset failed: %d\n", err);
 513                 return err;
 514         }
 515         msleep(QT1050_RESET_TIME);
 516
 517         /* Set pdata */
 518         err = qt1050_apply_fw_data(ts);
 519         if (err) {
 520                 dev_err(dev, "Failed to set firmware data: %d\n", err);
 521                 return err;
 522         }
 523
 524         err = devm_request_threaded_irq(dev, client->irq, NULL,
 525                                         qt1050_irq_threaded, IRQF_ONESHOT,
 526                                         "qt1050", ts);
 527         if (err) {
 528                 dev_err(&client->dev, "Failed to request irq: %d\n", err);
 529                 return err;
 530         }
 531
 532         /* Clear #CHANGE line */
 533         err = regmap_read(ts->regmap, QT1050_DET_STATUS, &status);
 534         if (err) {
 535                 dev_err(dev, "Failed to clear #CHANGE line level: %d\n", err);
 536                 return err;
 537         }
 538
 539         /* Register the input device */
 540         err = input_register_device(ts->input);
 541         if (err) {
 542                 dev_err(&client->dev, "Failed to register input device: %d\n",
 543                         err);
 544                 return err;
 545         }
 546
 547         return 0;
 548 }
 549
 550 static int __maybe_unused qt1050_suspend(struct device *dev)
 551 {
 552         struct i2c_client *client = to_i2c_client(dev);
 553         struct qt1050_priv *ts = i2c_get_clientdata(client);
 554
 555         disable_irq(client->irq);
 556
 557         /*
 558          * Set measurement interval to 1s (125 x 8ms) if wakeup is allowed
 559          * else turn off. The 1s interval seems to be a good compromise between
 560          * low power and response time.
 561          */
 562         return regmap_write(ts->regmap, QT1050_LPMODE,
 563                             device_may_wakeup(dev) ? 125 : 0);
 564 }
 565
 566 static int __maybe_unused qt1050_resume(struct device *dev)
 567 {
 568         struct i2c_client *client = to_i2c_client(dev);
 569         struct qt1050_priv *ts = i2c_get_clientdata(client);
 570
 571         enable_irq(client->irq);
 572
 573         /* Set measurement interval back to 16ms (2 x 8ms) */
 574         return regmap_write(ts->regmap, QT1050_LPMODE, 2);
 575 }
 576
 577 static SIMPLE_DEV_PM_OPS(qt1050_pm_ops, qt1050_suspend, qt1050_resume);
 578
 579 static const struct of_device_id __maybe_unused qt1050_of_match[] = {
 580         { .compatible = "microchip,qt1050", },
 581         { },
 582 };
 583 MODULE_DEVICE_TABLE(of, qt1050_of_match);
 584
 585 static struct i2c_driver qt1050_driver = {
 586         .driver = {
 587                 .name = "qt1050",
 588                 .of_match_table = of_match_ptr(qt1050_of_match),
 589                 .pm = &qt1050_pm_ops,
 590         },
 591         .probe_new = qt1050_probe,
 592 };
 593
 594 module_i2c_driver(qt1050_driver);
 595
 596 MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de");
 597 MODULE_DESCRIPTION("Driver for AT42QT1050 QTouch sensor");
 598 MODULE_LICENSE("GPL v2");