2 * ALPS touchpad PS/2 mouse driver
4 * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
5 * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
6 * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
7 * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
8 * Copyright (c) 2009 Sebastian Kapfer <sebastian_kapfer@gmx.net>
10 * ALPS detection, tap switching and status querying info is taken from
11 * tpconfig utility (by C. Scott Ananian and Bruce Kall).
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License version 2 as published by
15 * the Free Software Foundation.
18 #include <linux/slab.h>
19 #include <linux/input.h>
20 #include <linux/serio.h>
21 #include <linux/libps2.h>
26 #define ALPS_OLDPROTO 0x01 /* old style input */
27 #define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */
28 #define ALPS_PASS 0x04 /* device has a pass-through port */
30 #define ALPS_WHEEL 0x08 /* hardware wheel present */
31 #define ALPS_FW_BK_1 0x10 /* front & back buttons present */
32 #define ALPS_FW_BK_2 0x20 /* front & back buttons present */
33 #define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
34 #define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
37 static const struct alps_model_info alps_model_data
[] = {
38 { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS
| ALPS_DUALPOINT
}, /* Toshiba Salellite Pro M10 */
39 { { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO
}, /* UMAX-530T */
40 { { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
41 { { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
42 { { 0x60, 0x03, 0xc8 }, 0xf8, 0xf8, 0 }, /* HP ze1115 */
43 { { 0x63, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
44 { { 0x63, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
45 { { 0x63, 0x02, 0x28 }, 0xf8, 0xf8, ALPS_FW_BK_2
}, /* Fujitsu Siemens S6010 */
46 { { 0x63, 0x02, 0x3c }, 0x8f, 0x8f, ALPS_WHEEL
}, /* Toshiba Satellite S2400-103 */
47 { { 0x63, 0x02, 0x50 }, 0xef, 0xef, ALPS_FW_BK_1
}, /* NEC Versa L320 */
48 { { 0x63, 0x02, 0x64 }, 0xf8, 0xf8, 0 },
49 { { 0x63, 0x03, 0xc8 }, 0xf8, 0xf8, ALPS_PASS
| ALPS_DUALPOINT
}, /* Dell Latitude D800 */
50 { { 0x73, 0x00, 0x0a }, 0xf8, 0xf8, ALPS_DUALPOINT
}, /* ThinkPad R61 8918-5QG */
51 { { 0x73, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
52 { { 0x73, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_FW_BK_2
}, /* Ahtec Laptop */
53 { { 0x20, 0x02, 0x0e }, 0xf8, 0xf8, ALPS_PASS
| ALPS_DUALPOINT
}, /* XXX */
54 { { 0x22, 0x02, 0x0a }, 0xf8, 0xf8, ALPS_PASS
| ALPS_DUALPOINT
},
55 { { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS
| ALPS_DUALPOINT
}, /* Dell Latitude D600 */
56 /* Dell Latitude E5500, E6400, E6500, Precision M4400 */
57 { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
58 ALPS_PASS
| ALPS_DUALPOINT
| ALPS_PS2_INTERLEAVED
},
59 { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS
}, /* Dell Vostro 1400 */
60 { { 0x52, 0x01, 0x14 }, 0xff, 0xff,
61 ALPS_PASS
| ALPS_DUALPOINT
| ALPS_PS2_INTERLEAVED
}, /* Toshiba Tecra A11-11L */
65 * XXX - this entry is suspicious. First byte has zero lower nibble,
66 * which is what a normal mouse would report. Also, the value 0x0e
67 * isn't valid per PS/2 spec.
70 /* Packet formats are described in Documentation/input/alps.txt */
72 static bool alps_is_valid_first_byte(const struct alps_model_info
*model
,
75 return (data
& model
->mask0
) == model
->byte0
;
78 static void alps_report_buttons(struct psmouse
*psmouse
,
79 struct input_dev
*dev1
, struct input_dev
*dev2
,
80 int left
, int right
, int middle
)
82 struct input_dev
*dev
;
85 * If shared button has already been reported on the
86 * other device (dev2) then this event should be also
87 * sent through that device.
89 dev
= test_bit(BTN_LEFT
, dev2
->key
) ? dev2
: dev1
;
90 input_report_key(dev
, BTN_LEFT
, left
);
92 dev
= test_bit(BTN_RIGHT
, dev2
->key
) ? dev2
: dev1
;
93 input_report_key(dev
, BTN_RIGHT
, right
);
95 dev
= test_bit(BTN_MIDDLE
, dev2
->key
) ? dev2
: dev1
;
96 input_report_key(dev
, BTN_MIDDLE
, middle
);
99 * Sync the _other_ device now, we'll do the first
100 * device later once we report the rest of the events.
105 static void alps_process_packet(struct psmouse
*psmouse
)
107 struct alps_data
*priv
= psmouse
->private;
108 const struct alps_model_info
*model
= priv
->i
;
109 unsigned char *packet
= psmouse
->packet
;
110 struct input_dev
*dev
= psmouse
->dev
;
111 struct input_dev
*dev2
= priv
->dev2
;
112 int x
, y
, z
, ges
, fin
, left
, right
, middle
;
113 int back
= 0, forward
= 0;
115 if (model
->flags
& ALPS_OLDPROTO
) {
116 left
= packet
[2] & 0x10;
117 right
= packet
[2] & 0x08;
119 x
= packet
[1] | ((packet
[0] & 0x07) << 7);
120 y
= packet
[4] | ((packet
[3] & 0x07) << 7);
123 left
= packet
[3] & 1;
124 right
= packet
[3] & 2;
125 middle
= packet
[3] & 4;
126 x
= packet
[1] | ((packet
[2] & 0x78) << (7 - 3));
127 y
= packet
[4] | ((packet
[3] & 0x70) << (7 - 4));
131 if (model
->flags
& ALPS_FW_BK_1
) {
132 back
= packet
[0] & 0x10;
133 forward
= packet
[2] & 4;
136 if (model
->flags
& ALPS_FW_BK_2
) {
137 back
= packet
[3] & 4;
138 forward
= packet
[2] & 4;
139 if ((middle
= forward
&& back
))
146 if ((model
->flags
& ALPS_DUALPOINT
) && z
== 127) {
147 input_report_rel(dev2
, REL_X
, (x
> 383 ? (x
- 768) : x
));
148 input_report_rel(dev2
, REL_Y
, -(y
> 255 ? (y
- 512) : y
));
150 alps_report_buttons(psmouse
, dev2
, dev
, left
, right
, middle
);
156 alps_report_buttons(psmouse
, dev
, dev2
, left
, right
, middle
);
158 /* Convert hardware tap to a reasonable Z value */
163 * A "tap and drag" operation is reported by the hardware as a transition
164 * from (!fin && ges) to (fin && ges). This should be translated to the
165 * sequence Z>0, Z==0, Z>0, so the Z==0 event has to be generated manually.
167 if (ges
&& fin
&& !priv
->prev_fin
) {
168 input_report_abs(dev
, ABS_X
, x
);
169 input_report_abs(dev
, ABS_Y
, y
);
170 input_report_abs(dev
, ABS_PRESSURE
, 0);
171 input_report_key(dev
, BTN_TOOL_FINGER
, 0);
174 priv
->prev_fin
= fin
;
177 input_report_key(dev
, BTN_TOUCH
, 1);
179 input_report_key(dev
, BTN_TOUCH
, 0);
182 input_report_abs(dev
, ABS_X
, x
);
183 input_report_abs(dev
, ABS_Y
, y
);
186 input_report_abs(dev
, ABS_PRESSURE
, z
);
187 input_report_key(dev
, BTN_TOOL_FINGER
, z
> 0);
189 if (model
->flags
& ALPS_WHEEL
)
190 input_report_rel(dev
, REL_WHEEL
, ((packet
[2] << 1) & 0x08) - ((packet
[0] >> 4) & 0x07));
192 if (model
->flags
& (ALPS_FW_BK_1
| ALPS_FW_BK_2
)) {
193 input_report_key(dev
, BTN_FORWARD
, forward
);
194 input_report_key(dev
, BTN_BACK
, back
);
197 if (model
->flags
& ALPS_FOUR_BUTTONS
) {
198 input_report_key(dev
, BTN_0
, packet
[2] & 4);
199 input_report_key(dev
, BTN_1
, packet
[0] & 0x10);
200 input_report_key(dev
, BTN_2
, packet
[3] & 4);
201 input_report_key(dev
, BTN_3
, packet
[0] & 0x20);
207 static void alps_report_bare_ps2_packet(struct psmouse
*psmouse
,
208 unsigned char packet
[],
211 struct alps_data
*priv
= psmouse
->private;
212 struct input_dev
*dev2
= priv
->dev2
;
215 alps_report_buttons(psmouse
, dev2
, psmouse
->dev
,
216 packet
[0] & 1, packet
[0] & 2, packet
[0] & 4);
218 input_report_rel(dev2
, REL_X
,
219 packet
[1] ? packet
[1] - ((packet
[0] << 4) & 0x100) : 0);
220 input_report_rel(dev2
, REL_Y
,
221 packet
[2] ? ((packet
[0] << 3) & 0x100) - packet
[2] : 0);
226 static psmouse_ret_t
alps_handle_interleaved_ps2(struct psmouse
*psmouse
)
228 struct alps_data
*priv
= psmouse
->private;
230 if (psmouse
->pktcnt
< 6)
231 return PSMOUSE_GOOD_DATA
;
233 if (psmouse
->pktcnt
== 6) {
235 * Start a timer to flush the packet if it ends up last
236 * 6-byte packet in the stream. Timer needs to fire
237 * psmouse core times out itself. 20 ms should be enough
238 * to decide if we are getting more data or not.
240 mod_timer(&priv
->timer
, jiffies
+ msecs_to_jiffies(20));
241 return PSMOUSE_GOOD_DATA
;
244 del_timer(&priv
->timer
);
246 if (psmouse
->packet
[6] & 0x80) {
249 * Highest bit is set - that means we either had
250 * complete ALPS packet and this is start of the
251 * next packet or we got garbage.
254 if (((psmouse
->packet
[3] |
256 psmouse
->packet
[5]) & 0x80) ||
257 (!alps_is_valid_first_byte(priv
->i
, psmouse
->packet
[6]))) {
259 "refusing packet %x %x %x %x (suspected interleaved ps/2)\n",
260 psmouse
->packet
[3], psmouse
->packet
[4],
261 psmouse
->packet
[5], psmouse
->packet
[6]);
262 return PSMOUSE_BAD_DATA
;
265 alps_process_packet(psmouse
);
267 /* Continue with the next packet */
268 psmouse
->packet
[0] = psmouse
->packet
[6];
274 * High bit is 0 - that means that we indeed got a PS/2
275 * packet in the middle of ALPS packet.
277 * There is also possibility that we got 6-byte ALPS
278 * packet followed by 3-byte packet from trackpoint. We
279 * can not distinguish between these 2 scenarios but
280 * because the latter is unlikely to happen in course of
281 * normal operation (user would need to press all
282 * buttons on the pad and start moving trackpoint
283 * without touching the pad surface) we assume former.
284 * Even if we are wrong the wost thing that would happen
285 * the cursor would jump but we should not get protocol
286 * de-synchronization.
289 alps_report_bare_ps2_packet(psmouse
, &psmouse
->packet
[3],
293 * Continue with the standard ALPS protocol handling,
294 * but make sure we won't process it as an interleaved
295 * packet again, which may happen if all buttons are
296 * pressed. To avoid this let's reset the 4th bit which
299 psmouse
->packet
[3] = psmouse
->packet
[6] & 0xf7;
303 return PSMOUSE_GOOD_DATA
;
306 static void alps_flush_packet(unsigned long data
)
308 struct psmouse
*psmouse
= (struct psmouse
*)data
;
310 serio_pause_rx(psmouse
->ps2dev
.serio
);
312 if (psmouse
->pktcnt
== 6) {
315 * We did not any more data in reasonable amount of time.
316 * Validate the last 3 bytes and process as a standard
319 if ((psmouse
->packet
[3] |
321 psmouse
->packet
[5]) & 0x80) {
323 "refusing packet %x %x %x (suspected interleaved ps/2)\n",
324 psmouse
->packet
[3], psmouse
->packet
[4],
327 alps_process_packet(psmouse
);
332 serio_continue_rx(psmouse
->ps2dev
.serio
);
335 static psmouse_ret_t
alps_process_byte(struct psmouse
*psmouse
)
337 struct alps_data
*priv
= psmouse
->private;
338 const struct alps_model_info
*model
= priv
->i
;
340 if ((psmouse
->packet
[0] & 0xc8) == 0x08) { /* PS/2 packet */
341 if (psmouse
->pktcnt
== 3) {
342 alps_report_bare_ps2_packet(psmouse
, psmouse
->packet
,
344 return PSMOUSE_FULL_PACKET
;
346 return PSMOUSE_GOOD_DATA
;
349 /* Check for PS/2 packet stuffed in the middle of ALPS packet. */
351 if ((model
->flags
& ALPS_PS2_INTERLEAVED
) &&
352 psmouse
->pktcnt
>= 4 && (psmouse
->packet
[3] & 0x0f) == 0x0f) {
353 return alps_handle_interleaved_ps2(psmouse
);
356 if (!alps_is_valid_first_byte(model
, psmouse
->packet
[0])) {
358 "refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
359 psmouse
->packet
[0], model
->mask0
, model
->byte0
);
360 return PSMOUSE_BAD_DATA
;
363 /* Bytes 2 - 6 should have 0 in the highest bit */
364 if (psmouse
->pktcnt
>= 2 && psmouse
->pktcnt
<= 6 &&
365 (psmouse
->packet
[psmouse
->pktcnt
- 1] & 0x80)) {
366 psmouse_dbg(psmouse
, "refusing packet[%i] = %x\n",
368 psmouse
->packet
[psmouse
->pktcnt
- 1]);
369 return PSMOUSE_BAD_DATA
;
372 if (psmouse
->pktcnt
== 6) {
373 alps_process_packet(psmouse
);
374 return PSMOUSE_FULL_PACKET
;
377 return PSMOUSE_GOOD_DATA
;
380 static const struct alps_model_info
*alps_get_model(struct psmouse
*psmouse
, int *version
)
382 struct ps2dev
*ps2dev
= &psmouse
->ps2dev
;
383 static const unsigned char rates
[] = { 0, 10, 20, 40, 60, 80, 100, 200 };
384 unsigned char param
[4];
388 * First try "E6 report".
389 * ALPS should return 0,0,10 or 0,0,100
392 if (ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRES
) ||
393 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_SETSCALE11
) ||
394 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_SETSCALE11
) ||
395 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_SETSCALE11
))
398 param
[0] = param
[1] = param
[2] = 0xff;
399 if (ps2_command(ps2dev
, param
, PSMOUSE_CMD_GETINFO
))
402 psmouse_dbg(psmouse
, "E6 report: %2.2x %2.2x %2.2x",
403 param
[0], param
[1], param
[2]);
405 if (param
[0] != 0 || param
[1] != 0 || (param
[2] != 10 && param
[2] != 100))
409 * Now try "E7 report". Allowed responses are in
410 * alps_model_data[].signature
413 if (ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRES
) ||
414 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_SETSCALE21
) ||
415 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_SETSCALE21
) ||
416 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_SETSCALE21
))
419 param
[0] = param
[1] = param
[2] = 0xff;
420 if (ps2_command(ps2dev
, param
, PSMOUSE_CMD_GETINFO
))
423 psmouse_dbg(psmouse
, "E7 report: %2.2x %2.2x %2.2x",
424 param
[0], param
[1], param
[2]);
427 for (i
= 0; i
< ARRAY_SIZE(rates
) && param
[2] != rates
[i
]; i
++)
429 *version
= (param
[0] << 8) | (param
[1] << 4) | i
;
432 for (i
= 0; i
< ARRAY_SIZE(alps_model_data
); i
++)
433 if (!memcmp(param
, alps_model_data
[i
].signature
,
434 sizeof(alps_model_data
[i
].signature
)))
435 return alps_model_data
+ i
;
441 * For DualPoint devices select the device that should respond to
442 * subsequent commands. It looks like glidepad is behind stickpointer,
443 * I'd thought it would be other way around...
445 static int alps_passthrough_mode(struct psmouse
*psmouse
, bool enable
)
447 struct ps2dev
*ps2dev
= &psmouse
->ps2dev
;
448 int cmd
= enable
? PSMOUSE_CMD_SETSCALE21
: PSMOUSE_CMD_SETSCALE11
;
450 if (ps2_command(ps2dev
, NULL
, cmd
) ||
451 ps2_command(ps2dev
, NULL
, cmd
) ||
452 ps2_command(ps2dev
, NULL
, cmd
) ||
453 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_DISABLE
))
456 /* we may get 3 more bytes, just ignore them */
457 ps2_drain(ps2dev
, 3, 100);
462 static int alps_absolute_mode(struct psmouse
*psmouse
)
464 struct ps2dev
*ps2dev
= &psmouse
->ps2dev
;
466 /* Try ALPS magic knock - 4 disable before enable */
467 if (ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_DISABLE
) ||
468 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_DISABLE
) ||
469 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_DISABLE
) ||
470 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_DISABLE
) ||
471 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_ENABLE
))
475 * Switch mouse to poll (remote) mode so motion data will not
478 return ps2_command(&psmouse
->ps2dev
, NULL
, PSMOUSE_CMD_SETPOLL
);
481 static int alps_get_status(struct psmouse
*psmouse
, char *param
)
483 struct ps2dev
*ps2dev
= &psmouse
->ps2dev
;
485 /* Get status: 0xF5 0xF5 0xF5 0xE9 */
486 if (ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_DISABLE
) ||
487 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_DISABLE
) ||
488 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_DISABLE
) ||
489 ps2_command(ps2dev
, param
, PSMOUSE_CMD_GETINFO
))
492 psmouse_dbg(psmouse
, "Status: %2.2x %2.2x %2.2x",
493 param
[0], param
[1], param
[2]);
499 * Turn touchpad tapping on or off. The sequences are:
500 * 0xE9 0xF5 0xF5 0xF3 0x0A to enable,
501 * 0xE9 0xF5 0xF5 0xE8 0x00 to disable.
502 * My guess that 0xE9 (GetInfo) is here as a sync point.
503 * For models that also have stickpointer (DualPoints) its tapping
504 * is controlled separately (0xE6 0xE6 0xE6 0xF3 0x14|0x0A) but
505 * we don't fiddle with it.
507 static int alps_tap_mode(struct psmouse
*psmouse
, int enable
)
509 struct ps2dev
*ps2dev
= &psmouse
->ps2dev
;
510 int cmd
= enable
? PSMOUSE_CMD_SETRATE
: PSMOUSE_CMD_SETRES
;
511 unsigned char tap_arg
= enable
? 0x0A : 0x00;
512 unsigned char param
[4];
514 if (ps2_command(ps2dev
, param
, PSMOUSE_CMD_GETINFO
) ||
515 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_DISABLE
) ||
516 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_DISABLE
) ||
517 ps2_command(ps2dev
, &tap_arg
, cmd
))
520 if (alps_get_status(psmouse
, param
))
527 * alps_poll() - poll the touchpad for current motion packet.
530 static int alps_poll(struct psmouse
*psmouse
)
532 struct alps_data
*priv
= psmouse
->private;
533 unsigned char buf
[6];
536 if (priv
->i
->flags
& ALPS_PASS
)
537 alps_passthrough_mode(psmouse
, true);
539 poll_failed
= ps2_command(&psmouse
->ps2dev
, buf
,
540 PSMOUSE_CMD_POLL
| (psmouse
->pktsize
<< 8)) < 0;
542 if (priv
->i
->flags
& ALPS_PASS
)
543 alps_passthrough_mode(psmouse
, false);
545 if (poll_failed
|| (buf
[0] & priv
->i
->mask0
) != priv
->i
->byte0
)
548 if ((psmouse
->badbyte
& 0xc8) == 0x08) {
550 * Poll the track stick ...
552 if (ps2_command(&psmouse
->ps2dev
, buf
, PSMOUSE_CMD_POLL
| (3 << 8)))
556 memcpy(psmouse
->packet
, buf
, sizeof(buf
));
560 static int alps_hw_init(struct psmouse
*psmouse
)
562 struct alps_data
*priv
= psmouse
->private;
563 const struct alps_model_info
*model
= priv
->i
;
565 if ((model
->flags
& ALPS_PASS
) &&
566 alps_passthrough_mode(psmouse
, true)) {
570 if (alps_tap_mode(psmouse
, true)) {
571 psmouse_warn(psmouse
, "Failed to enable hardware tapping\n");
575 if (alps_absolute_mode(psmouse
)) {
576 psmouse_err(psmouse
, "Failed to enable absolute mode\n");
580 if ((model
->flags
& ALPS_PASS
) &&
581 alps_passthrough_mode(psmouse
, false)) {
585 /* ALPS needs stream mode, otherwise it won't report any data */
586 if (ps2_command(&psmouse
->ps2dev
, NULL
, PSMOUSE_CMD_SETSTREAM
)) {
587 psmouse_err(psmouse
, "Failed to enable stream mode\n");
594 static int alps_reconnect(struct psmouse
*psmouse
)
596 const struct alps_model_info
*model
;
598 psmouse_reset(psmouse
);
600 model
= alps_get_model(psmouse
, NULL
);
604 return alps_hw_init(psmouse
);
607 static void alps_disconnect(struct psmouse
*psmouse
)
609 struct alps_data
*priv
= psmouse
->private;
611 psmouse_reset(psmouse
);
612 del_timer_sync(&priv
->timer
);
613 input_unregister_device(priv
->dev2
);
617 int alps_init(struct psmouse
*psmouse
)
619 struct alps_data
*priv
;
620 const struct alps_model_info
*model
;
621 struct input_dev
*dev1
= psmouse
->dev
, *dev2
;
624 priv
= kzalloc(sizeof(struct alps_data
), GFP_KERNEL
);
625 dev2
= input_allocate_device();
630 setup_timer(&priv
->timer
, alps_flush_packet
, (unsigned long)psmouse
);
632 psmouse
->private = priv
;
634 model
= alps_get_model(psmouse
, &version
);
640 if (alps_hw_init(psmouse
))
644 * Undo part of setup done for us by psmouse core since touchpad
645 * is not a relative device.
647 __clear_bit(EV_REL
, dev1
->evbit
);
648 __clear_bit(REL_X
, dev1
->relbit
);
649 __clear_bit(REL_Y
, dev1
->relbit
);
652 * Now set up our capabilities.
654 dev1
->evbit
[BIT_WORD(EV_KEY
)] |= BIT_MASK(EV_KEY
);
655 dev1
->keybit
[BIT_WORD(BTN_TOUCH
)] |= BIT_MASK(BTN_TOUCH
);
656 dev1
->keybit
[BIT_WORD(BTN_TOOL_FINGER
)] |= BIT_MASK(BTN_TOOL_FINGER
);
657 dev1
->keybit
[BIT_WORD(BTN_LEFT
)] |=
658 BIT_MASK(BTN_LEFT
) | BIT_MASK(BTN_RIGHT
);
660 dev1
->evbit
[BIT_WORD(EV_ABS
)] |= BIT_MASK(EV_ABS
);
661 input_set_abs_params(dev1
, ABS_X
, 0, 1023, 0, 0);
662 input_set_abs_params(dev1
, ABS_Y
, 0, 767, 0, 0);
663 input_set_abs_params(dev1
, ABS_PRESSURE
, 0, 127, 0, 0);
665 if (model
->flags
& ALPS_WHEEL
) {
666 dev1
->evbit
[BIT_WORD(EV_REL
)] |= BIT_MASK(EV_REL
);
667 dev1
->relbit
[BIT_WORD(REL_WHEEL
)] |= BIT_MASK(REL_WHEEL
);
670 if (model
->flags
& (ALPS_FW_BK_1
| ALPS_FW_BK_2
)) {
671 dev1
->keybit
[BIT_WORD(BTN_FORWARD
)] |= BIT_MASK(BTN_FORWARD
);
672 dev1
->keybit
[BIT_WORD(BTN_BACK
)] |= BIT_MASK(BTN_BACK
);
675 if (model
->flags
& ALPS_FOUR_BUTTONS
) {
676 dev1
->keybit
[BIT_WORD(BTN_0
)] |= BIT_MASK(BTN_0
);
677 dev1
->keybit
[BIT_WORD(BTN_1
)] |= BIT_MASK(BTN_1
);
678 dev1
->keybit
[BIT_WORD(BTN_2
)] |= BIT_MASK(BTN_2
);
679 dev1
->keybit
[BIT_WORD(BTN_3
)] |= BIT_MASK(BTN_3
);
681 dev1
->keybit
[BIT_WORD(BTN_MIDDLE
)] |= BIT_MASK(BTN_MIDDLE
);
684 snprintf(priv
->phys
, sizeof(priv
->phys
), "%s/input1", psmouse
->ps2dev
.serio
->phys
);
685 dev2
->phys
= priv
->phys
;
686 dev2
->name
= (model
->flags
& ALPS_DUALPOINT
) ? "DualPoint Stick" : "PS/2 Mouse";
687 dev2
->id
.bustype
= BUS_I8042
;
688 dev2
->id
.vendor
= 0x0002;
689 dev2
->id
.product
= PSMOUSE_ALPS
;
690 dev2
->id
.version
= 0x0000;
691 dev2
->dev
.parent
= &psmouse
->ps2dev
.serio
->dev
;
693 dev2
->evbit
[0] = BIT_MASK(EV_KEY
) | BIT_MASK(EV_REL
);
694 dev2
->relbit
[BIT_WORD(REL_X
)] = BIT_MASK(REL_X
) | BIT_MASK(REL_Y
);
695 dev2
->keybit
[BIT_WORD(BTN_LEFT
)] =
696 BIT_MASK(BTN_LEFT
) | BIT_MASK(BTN_MIDDLE
) | BIT_MASK(BTN_RIGHT
);
698 if (input_register_device(priv
->dev2
))
701 psmouse
->protocol_handler
= alps_process_byte
;
702 psmouse
->poll
= alps_poll
;
703 psmouse
->disconnect
= alps_disconnect
;
704 psmouse
->reconnect
= alps_reconnect
;
705 psmouse
->pktsize
= 6;
707 /* We are having trouble resyncing ALPS touchpads so disable it for now */
708 psmouse
->resync_time
= 0;
713 psmouse_reset(psmouse
);
714 input_free_device(dev2
);
716 psmouse
->private = NULL
;
720 int alps_detect(struct psmouse
*psmouse
, bool set_properties
)
723 const struct alps_model_info
*model
;
725 model
= alps_get_model(psmouse
, &version
);
729 if (set_properties
) {
730 psmouse
->vendor
= "ALPS";
731 psmouse
->name
= model
->flags
& ALPS_DUALPOINT
?
732 "DualPoint TouchPad" : "GlidePoint";
733 psmouse
->model
= version
;