Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

[mirror_ubuntu-zesty-kernel.git] / drivers / input / rmi4 / rmi_f11.c

/*
 * Copyright (c) 2011-2015 Synaptics Incorporated
 * Copyright (c) 2011 Unixphere
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published by
 * the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/rmi.h>
#include <linux/slab.h>
#include <linux/of.h>
#include "rmi_driver.h"
#include "rmi_2d_sensor.h"

#define F11_MAX_NUM_OF_FINGERS          10
#define F11_MAX_NUM_OF_TOUCH_SHAPES     16

#define FINGER_STATE_MASK       0x03

#define F11_CTRL_SENSOR_MAX_X_POS_OFFSET        6
#define F11_CTRL_SENSOR_MAX_Y_POS_OFFSET        8

#define DEFAULT_XY_MAX 9999
#define DEFAULT_MAX_ABS_MT_PRESSURE 255
#define DEFAULT_MAX_ABS_MT_TOUCH 15
#define DEFAULT_MAX_ABS_MT_ORIENTATION 1
#define DEFAULT_MIN_ABS_MT_TRACKING_ID 1
#define DEFAULT_MAX_ABS_MT_TRACKING_ID 10

/** A note about RMI4 F11 register structure.
 *
 * The properties for
 * a given sensor are described by its query registers.  The number of query
 * registers and the layout of their contents are described by the F11 device
 * queries as well as the sensor query information.
 *
 * Similarly, each sensor has control registers that govern its behavior.  The
 * size and layout of the control registers for a given sensor can be determined
 * by parsing that sensors query registers.
 *
 * And in a likewise fashion, each sensor has data registers where it reports
 * its touch data and other interesting stuff.  The size and layout of a
 * sensors data registers must be determined by parsing its query registers.
 *
 * The short story is that we need to read and parse a lot of query
 * registers in order to determine the attributes of a sensor. Then
 * we need to use that data to compute the size of the control and data
 * registers for sensor.
 *
 * The end result is that we have a number of structs that aren't used to
 * directly generate the input events, but their size, location and contents
 * are critical to determining where the data we are interested in lives.
 *
 * At this time, the driver does not yet comprehend all possible F11
 * configuration options, but it should be sufficient to cover 99% of RMI4 F11
 * devices currently in the field.
 */

/* maximum ABS_MT_POSITION displacement (in mm) */
#define DMAX 10

/**
 * @rezero - writing this to the F11 command register will cause the sensor to
 * calibrate to the current capacitive state.
 */
#define RMI_F11_REZERO  0x01

#define RMI_F11_HAS_QUERY9              (1 << 3)
#define RMI_F11_HAS_QUERY11             (1 << 4)
#define RMI_F11_HAS_QUERY12             (1 << 5)
#define RMI_F11_HAS_QUERY27             (1 << 6)
#define RMI_F11_HAS_QUERY28             (1 << 7)

/** Defs for Query 1 */

#define RMI_F11_NR_FINGERS_MASK 0x07
#define RMI_F11_HAS_REL                 (1 << 3)
#define RMI_F11_HAS_ABS                 (1 << 4)
#define RMI_F11_HAS_GESTURES            (1 << 5)
#define RMI_F11_HAS_SENSITIVITY_ADJ     (1 << 6)
#define RMI_F11_CONFIGURABLE            (1 << 7)

/** Defs for Query 2, 3, and 4. */
#define RMI_F11_NR_ELECTRODES_MASK      0x7F

/** Defs for Query 5 */

#define RMI_F11_ABS_DATA_SIZE_MASK      0x03
#define RMI_F11_HAS_ANCHORED_FINGER     (1 << 2)
#define RMI_F11_HAS_ADJ_HYST            (1 << 3)
#define RMI_F11_HAS_DRIBBLE             (1 << 4)
#define RMI_F11_HAS_BENDING_CORRECTION  (1 << 5)
#define RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION    (1 << 6)
#define RMI_F11_HAS_JITTER_FILTER       (1 << 7)

/** Defs for Query 7 */
#define RMI_F11_HAS_SINGLE_TAP                  (1 << 0)
#define RMI_F11_HAS_TAP_AND_HOLD                (1 << 1)
#define RMI_F11_HAS_DOUBLE_TAP                  (1 << 2)
#define RMI_F11_HAS_EARLY_TAP                   (1 << 3)
#define RMI_F11_HAS_FLICK                       (1 << 4)
#define RMI_F11_HAS_PRESS                       (1 << 5)
#define RMI_F11_HAS_PINCH                       (1 << 6)
#define RMI_F11_HAS_CHIRAL                      (1 << 7)

/** Defs for Query 8 */
#define RMI_F11_HAS_PALM_DET                    (1 << 0)
#define RMI_F11_HAS_ROTATE                      (1 << 1)
#define RMI_F11_HAS_TOUCH_SHAPES                (1 << 2)
#define RMI_F11_HAS_SCROLL_ZONES                (1 << 3)
#define RMI_F11_HAS_INDIVIDUAL_SCROLL_ZONES     (1 << 4)
#define RMI_F11_HAS_MF_SCROLL                   (1 << 5)
#define RMI_F11_HAS_MF_EDGE_MOTION              (1 << 6)
#define RMI_F11_HAS_MF_SCROLL_INERTIA           (1 << 7)

/** Defs for Query 9. */
#define RMI_F11_HAS_PEN                         (1 << 0)
#define RMI_F11_HAS_PROXIMITY                   (1 << 1)
#define RMI_F11_HAS_PALM_DET_SENSITIVITY        (1 << 2)
#define RMI_F11_HAS_SUPPRESS_ON_PALM_DETECT     (1 << 3)
#define RMI_F11_HAS_TWO_PEN_THRESHOLDS          (1 << 4)
#define RMI_F11_HAS_CONTACT_GEOMETRY            (1 << 5)
#define RMI_F11_HAS_PEN_HOVER_DISCRIMINATION    (1 << 6)
#define RMI_F11_HAS_PEN_FILTERS                 (1 << 7)

/** Defs for Query 10. */
#define RMI_F11_NR_TOUCH_SHAPES_MASK            0x1F

/** Defs for Query 11 */

#define RMI_F11_HAS_Z_TUNING                    (1 << 0)
#define RMI_F11_HAS_ALGORITHM_SELECTION         (1 << 1)
#define RMI_F11_HAS_W_TUNING                    (1 << 2)
#define RMI_F11_HAS_PITCH_INFO                  (1 << 3)
#define RMI_F11_HAS_FINGER_SIZE                 (1 << 4)
#define RMI_F11_HAS_SEGMENTATION_AGGRESSIVENESS (1 << 5)
#define RMI_F11_HAS_XY_CLIP                     (1 << 6)
#define RMI_F11_HAS_DRUMMING_FILTER             (1 << 7)

/** Defs for Query 12. */

#define RMI_F11_HAS_GAPLESS_FINGER              (1 << 0)
#define RMI_F11_HAS_GAPLESS_FINGER_TUNING       (1 << 1)
#define RMI_F11_HAS_8BIT_W                      (1 << 2)
#define RMI_F11_HAS_ADJUSTABLE_MAPPING          (1 << 3)
#define RMI_F11_HAS_INFO2                       (1 << 4)
#define RMI_F11_HAS_PHYSICAL_PROPS              (1 << 5)
#define RMI_F11_HAS_FINGER_LIMIT                (1 << 6)
#define RMI_F11_HAS_LINEAR_COEFF                (1 << 7)

/** Defs for Query 13. */

#define RMI_F11_JITTER_WINDOW_MASK              0x1F
#define RMI_F11_JITTER_FILTER_MASK              0x60
#define RMI_F11_JITTER_FILTER_SHIFT             5

/** Defs for Query 14. */
#define RMI_F11_LIGHT_CONTROL_MASK              0x03
#define RMI_F11_IS_CLEAR                        (1 << 2)
#define RMI_F11_CLICKPAD_PROPS_MASK             0x18
#define RMI_F11_CLICKPAD_PROPS_SHIFT            3
#define RMI_F11_MOUSE_BUTTONS_MASK              0x60
#define RMI_F11_MOUSE_BUTTONS_SHIFT             5
#define RMI_F11_HAS_ADVANCED_GESTURES           (1 << 7)

#define RMI_F11_QUERY_SIZE                      4
#define RMI_F11_QUERY_GESTURE_SIZE              2

#define F11_LIGHT_CTL_NONE 0x00
#define F11_LUXPAD         0x01
#define F11_DUAL_MODE      0x02

#define F11_NOT_CLICKPAD     0x00
#define F11_HINGED_CLICKPAD  0x01
#define F11_UNIFORM_CLICKPAD 0x02

/**
 * Query registers 1 through 4 are always present.
 *
 * @nr_fingers - describes the maximum number of fingers the 2-D sensor
 * supports.
 * @has_rel - the sensor supports relative motion reporting.
 * @has_abs - the sensor supports absolute poition reporting.
 * @has_gestures - the sensor supports gesture reporting.
 * @has_sensitivity_adjust - the sensor supports a global sensitivity
 * adjustment.
 * @configurable - the sensor supports various configuration options.
 * @num_of_x_electrodes -  the maximum number of electrodes the 2-D sensor
 * supports on the X axis.
 * @num_of_y_electrodes -  the maximum number of electrodes the 2-D sensor
 * supports on the Y axis.
 * @max_electrodes - the total number of X and Y electrodes that may be
 * configured.
 *
 * Query 5 is present if the has_abs bit is set.
 *
 * @abs_data_size - describes the format of data reported by the absolute
 * data source.  Only one format (the kind used here) is supported at this
 * time.
 * @has_anchored_finger - then the sensor supports the high-precision second
 * finger tracking provided by the manual tracking and motion sensitivity
 * options.
 * @has_adjust_hyst - the difference between the finger release threshold and
 * the touch threshold.
 * @has_dribble - the sensor supports the generation of dribble interrupts,
 * which may be enabled or disabled with the dribble control bit.
 * @has_bending_correction - Bending related data registers 28 and 36, and
 * control register 52..57 are present.
 * @has_large_object_suppression - control register 58 and data register 28
 * exist.
 * @has_jitter_filter - query 13 and control 73..76 exist.
 *
 * Gesture information queries 7 and 8 are present if has_gestures bit is set.
 *
 * @has_single_tap - a basic single-tap gesture is supported.
 * @has_tap_n_hold - tap-and-hold gesture is supported.
 * @has_double_tap - double-tap gesture is supported.
 * @has_early_tap - early tap is supported and reported as soon as the finger
 * lifts for any tap event that could be interpreted as either a single tap
 * or as the first tap of a double-tap or tap-and-hold gesture.
 * @has_flick - flick detection is supported.
 * @has_press - press gesture reporting is supported.
 * @has_pinch - pinch gesture detection is supported.
 * @has_palm_det - the 2-D sensor notifies the host whenever a large conductive
 * object such as a palm or a cheek touches the 2-D sensor.
 * @has_rotate - rotation gesture detection is supported.
 * @has_touch_shapes - TouchShapes are supported.  A TouchShape is a fixed
 * rectangular area on the sensor that behaves like a capacitive button.
 * @has_scroll_zones - scrolling areas near the sensor edges are supported.
 * @has_individual_scroll_zones - if 1, then 4 scroll zones are supported;
 * if 0, then only two are supported.
 * @has_mf_scroll - the multifinger_scrolling bit will be set when
 * more than one finger is involved in a scrolling action.
 *
 * Convenience for checking bytes in the gesture info registers.  This is done
 * often enough that we put it here to declutter the conditionals
 *
 * @query7_nonzero - true if none of the query 7 bits are set
 * @query8_nonzero - true if none of the query 8 bits are set
 *
 * Query 9 is present if the has_query9 is set.
 *
 * @has_pen - detection of a stylus is supported and registers F11_2D_Ctrl20
 * and F11_2D_Ctrl21 exist.
 * @has_proximity - detection of fingers near the sensor is supported and
 * registers F11_2D_Ctrl22 through F11_2D_Ctrl26 exist.
 * @has_palm_det_sensitivity -  the sensor supports the palm detect sensitivity
 * feature and register F11_2D_Ctrl27 exists.
 * @has_two_pen_thresholds - is has_pen is also set, then F11_2D_Ctrl35 exists.
 * @has_contact_geometry - the sensor supports the use of contact geometry to
 * map absolute X and Y target positions and registers F11_2D_Data18
 * through F11_2D_Data27 exist.
 *
 * Touch shape info (query 10) is present if has_touch_shapes is set.
 *
 * @nr_touch_shapes - the total number of touch shapes supported.
 *
 * Query 11 is present if the has_query11 bit is set in query 0.
 *
 * @has_z_tuning - if set, the sensor supports Z tuning and registers
 * F11_2D_Ctrl29 through F11_2D_Ctrl33 exist.
 * @has_algorithm_selection - controls choice of noise suppression algorithm
 * @has_w_tuning - the sensor supports Wx and Wy scaling and registers
 * F11_2D_Ctrl36 through F11_2D_Ctrl39 exist.
 * @has_pitch_info - the X and Y pitches of the sensor electrodes can be
 * configured and registers F11_2D_Ctrl40 and F11_2D_Ctrl41 exist.
 * @has_finger_size -  the default finger width settings for the
 * sensor can be configured and registers F11_2D_Ctrl42 through F11_2D_Ctrl44
 * exist.
 * @has_segmentation_aggressiveness - the sensor’s ability to distinguish
 * multiple objects close together can be configured and register F11_2D_Ctrl45
 * exists.
 * @has_XY_clip -  the inactive outside borders of the sensor can be
 * configured and registers F11_2D_Ctrl46 through F11_2D_Ctrl49 exist.
 * @has_drumming_filter - the sensor can be configured to distinguish
 * between a fast flick and a quick drumming movement and registers
 * F11_2D_Ctrl50 and F11_2D_Ctrl51 exist.
 *
 * Query 12 is present if hasQuery12 bit is set.
 *
 * @has_gapless_finger - control registers relating to gapless finger are
 * present.
 * @has_gapless_finger_tuning - additional control and data registers relating
 * to gapless finger are present.
 * @has_8bit_w - larger W value reporting is supported.
 * @has_adjustable_mapping - TBD
 * @has_info2 - the general info query14 is present
 * @has_physical_props - additional queries describing the physical properties
 * of the sensor are present.
 * @has_finger_limit - indicates that F11 Ctrl 80 exists.
 * @has_linear_coeff - indicates that F11 Ctrl 81 exists.
 *
 * Query 13 is present if Query 5's has_jitter_filter bit is set.
 * @jitter_window_size - used by Design Studio 4.
 * @jitter_filter_type - used by Design Studio 4.
 *
 * Query 14 is present if query 12's has_general_info2 flag is set.
 *
 * @light_control - Indicates what light/led control features are present, if
 * any.
 * @is_clear - if set, this is a clear sensor (indicating direct pointing
 * application), otherwise it's opaque (indicating indirect pointing).
 * @clickpad_props - specifies if this is a clickpad, and if so what sort of
 * mechanism it uses
 * @mouse_buttons - specifies the number of mouse buttons present (if any).
 * @has_advanced_gestures - advanced driver gestures are supported.
 */
struct f11_2d_sensor_queries {
        /* query1 */
        u8 nr_fingers;
        bool has_rel;
        bool has_abs;
        bool has_gestures;
        bool has_sensitivity_adjust;
        bool configurable;

        /* query2 */
        u8 nr_x_electrodes;

        /* query3 */
        u8 nr_y_electrodes;

        /* query4 */
        u8 max_electrodes;

        /* query5 */
        u8 abs_data_size;
        bool has_anchored_finger;
        bool has_adj_hyst;
        bool has_dribble;
        bool has_bending_correction;
        bool has_large_object_suppression;
        bool has_jitter_filter;

        u8 f11_2d_query6;

        /* query 7 */
        bool has_single_tap;
        bool has_tap_n_hold;
        bool has_double_tap;
        bool has_early_tap;
        bool has_flick;
        bool has_press;
        bool has_pinch;
        bool has_chiral;

        bool query7_nonzero;

        /* query 8 */
        bool has_palm_det;
        bool has_rotate;
        bool has_touch_shapes;
        bool has_scroll_zones;
        bool has_individual_scroll_zones;
        bool has_mf_scroll;
        bool has_mf_edge_motion;
        bool has_mf_scroll_inertia;

        bool query8_nonzero;

        /* Query 9 */
        bool has_pen;
        bool has_proximity;
        bool has_palm_det_sensitivity;
        bool has_suppress_on_palm_detect;
        bool has_two_pen_thresholds;
        bool has_contact_geometry;
        bool has_pen_hover_discrimination;
        bool has_pen_filters;

        /* Query 10 */
        u8 nr_touch_shapes;

        /* Query 11. */
        bool has_z_tuning;
        bool has_algorithm_selection;
        bool has_w_tuning;
        bool has_pitch_info;
        bool has_finger_size;
        bool has_segmentation_aggressiveness;
        bool has_XY_clip;
        bool has_drumming_filter;

        /* Query 12 */
        bool has_gapless_finger;
        bool has_gapless_finger_tuning;
        bool has_8bit_w;
        bool has_adjustable_mapping;
        bool has_info2;
        bool has_physical_props;
        bool has_finger_limit;
        bool has_linear_coeff_2;

        /* Query 13 */
        u8 jitter_window_size;
        u8 jitter_filter_type;

        /* Query 14 */
        u8 light_control;
        bool is_clear;
        u8 clickpad_props;
        u8 mouse_buttons;
        bool has_advanced_gestures;

        /* Query 15 - 18 */
        u16 x_sensor_size_mm;
        u16 y_sensor_size_mm;
};

/* Defs for Ctrl0. */
#define RMI_F11_REPORT_MODE_MASK        0x07
#define RMI_F11_ABS_POS_FILT            (1 << 3)
#define RMI_F11_REL_POS_FILT            (1 << 4)
#define RMI_F11_REL_BALLISTICS          (1 << 5)
#define RMI_F11_DRIBBLE                 (1 << 6)
#define RMI_F11_REPORT_BEYOND_CLIP      (1 << 7)

/* Defs for Ctrl1. */
#define RMI_F11_PALM_DETECT_THRESH_MASK 0x0F
#define RMI_F11_MOTION_SENSITIVITY_MASK 0x30
#define RMI_F11_MANUAL_TRACKING         (1 << 6)
#define RMI_F11_MANUAL_TRACKED_FINGER   (1 << 7)

#define RMI_F11_DELTA_X_THRESHOLD       2
#define RMI_F11_DELTA_Y_THRESHOLD       3

#define RMI_F11_CTRL_REG_COUNT          12

struct f11_2d_ctrl {
        u8              ctrl0_11[RMI_F11_CTRL_REG_COUNT];
        u16             ctrl0_11_address;
};

#define RMI_F11_ABS_BYTES 5
#define RMI_F11_REL_BYTES 2

/* Defs for Data 8 */

#define RMI_F11_SINGLE_TAP              (1 << 0)
#define RMI_F11_TAP_AND_HOLD            (1 << 1)
#define RMI_F11_DOUBLE_TAP              (1 << 2)
#define RMI_F11_EARLY_TAP               (1 << 3)
#define RMI_F11_FLICK                   (1 << 4)
#define RMI_F11_PRESS                   (1 << 5)
#define RMI_F11_PINCH                   (1 << 6)

/* Defs for Data 9 */

#define RMI_F11_PALM_DETECT                     (1 << 0)
#define RMI_F11_ROTATE                          (1 << 1)
#define RMI_F11_SHAPE                           (1 << 2)
#define RMI_F11_SCROLLZONE                      (1 << 3)
#define RMI_F11_GESTURE_FINGER_COUNT_MASK       0x70

/** Handy pointers into our data buffer.
 *
 * @f_state - start of finger state registers.
 * @abs_pos - start of absolute position registers (if present).
 * @rel_pos - start of relative data registers (if present).
 * @gest_1  - gesture flags (if present).
 * @gest_2  - gesture flags & finger count (if present).
 * @pinch   - pinch motion register (if present).
 * @flick   - flick distance X & Y, flick time (if present).
 * @rotate  - rotate motion and finger separation.
 * @multi_scroll - chiral deltas for X and Y (if present).
 * @scroll_zones - scroll deltas for 4 regions (if present).
 */
struct f11_2d_data {
        u8      *f_state;
        u8      *abs_pos;
        s8      *rel_pos;
        u8      *gest_1;
        u8      *gest_2;
        s8      *pinch;
        u8      *flick;
        u8      *rotate;
        u8      *shapes;
        s8      *multi_scroll;
        s8      *scroll_zones;
};

/** Data pertaining to F11 in general.  For per-sensor data, see struct
 * f11_2d_sensor.
 *
 * @dev_query - F11 device specific query registers.
 * @dev_controls - F11 device specific control registers.
 * @dev_controls_mutex - lock for the control registers.
 * @rezero_wait_ms - if nonzero, upon resume we will wait this many
 * milliseconds before rezeroing the sensor(s).  This is useful in systems with
 * poor electrical behavior on resume, where the initial calibration of the
 * sensor(s) coming out of sleep state may be bogus.
 * @sensors - per sensor data structures.
 */
struct f11_data {
        bool has_query9;
        bool has_query11;
        bool has_query12;
        bool has_query27;
        bool has_query28;
        bool has_acm;
        struct f11_2d_ctrl dev_controls;
        struct mutex dev_controls_mutex;
        u16 rezero_wait_ms;
        struct rmi_2d_sensor sensor;
        struct f11_2d_sensor_queries sens_query;
        struct f11_2d_data data;
        struct rmi_2d_sensor_platform_data sensor_pdata;
        unsigned long *abs_mask;
        unsigned long *rel_mask;
        unsigned long *result_bits;
};

enum f11_finger_state {
        F11_NO_FINGER   = 0x00,
        F11_PRESENT     = 0x01,
        F11_INACCURATE  = 0x02,
        F11_RESERVED    = 0x03
};

static void rmi_f11_rel_pos_report(struct f11_data *f11, u8 n_finger)
{
        struct rmi_2d_sensor *sensor = &f11->sensor;
        struct f11_2d_data *data = &f11->data;
        s8 x, y;

        x = data->rel_pos[n_finger * RMI_F11_REL_BYTES];
        y = data->rel_pos[n_finger * RMI_F11_REL_BYTES + 1];

        rmi_2d_sensor_rel_report(sensor, x, y);
}

static void rmi_f11_abs_pos_process(struct f11_data *f11,
                                   struct rmi_2d_sensor *sensor,
                                   struct rmi_2d_sensor_abs_object *obj,
                                   enum f11_finger_state finger_state,
                                   u8 n_finger)
{
        struct f11_2d_data *data = &f11->data;
        u8 *pos_data = &data->abs_pos[n_finger * RMI_F11_ABS_BYTES];
        int tool_type = MT_TOOL_FINGER;

        switch (finger_state) {
        case F11_PRESENT:
                obj->type = RMI_2D_OBJECT_FINGER;
                break;
        default:
                obj->type = RMI_2D_OBJECT_NONE;
        }

        obj->mt_tool = tool_type;
        obj->x = (pos_data[0] << 4) | (pos_data[2] & 0x0F);
        obj->y = (pos_data[1] << 4) | (pos_data[2] >> 4);
        obj->z = pos_data[4];
        obj->wx = pos_data[3] & 0x0f;
        obj->wy = pos_data[3] >> 4;

        rmi_2d_sensor_abs_process(sensor, obj, n_finger);
}

static inline u8 rmi_f11_parse_finger_state(const u8 *f_state, u8 n_finger)
{
        return (f_state[n_finger / 4] >> (2 * (n_finger % 4))) &
                                                        FINGER_STATE_MASK;
}

static void rmi_f11_finger_handler(struct f11_data *f11,
                                   struct rmi_2d_sensor *sensor,
                                   unsigned long *irq_bits, int num_irq_regs,
                                   int size)
{
        const u8 *f_state = f11->data.f_state;
        u8 finger_state;
        u8 i;
        int abs_fingers;
        int rel_fingers;
        int abs_size = sensor->nbr_fingers * RMI_F11_ABS_BYTES;

        int abs_bits = bitmap_and(f11->result_bits, irq_bits, f11->abs_mask,
                                  num_irq_regs * 8);
        int rel_bits = bitmap_and(f11->result_bits, irq_bits, f11->rel_mask,
                                  num_irq_regs * 8);

        if (abs_bits) {
                if (abs_size > size)
                        abs_fingers = size / RMI_F11_ABS_BYTES;
                else
                        abs_fingers = sensor->nbr_fingers;

                for (i = 0; i < abs_fingers; i++) {
                        /* Possible of having 4 fingers per f_state register */
                        finger_state = rmi_f11_parse_finger_state(f_state, i);
                        if (finger_state == F11_RESERVED) {
                                pr_err("Invalid finger state[%d]: 0x%02x", i,
                                        finger_state);
                                continue;
                        }

                        rmi_f11_abs_pos_process(f11, sensor, &sensor->objs[i],
                                                        finger_state, i);
                }
        }

        if (rel_bits) {
                if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size)
                        rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES;
                else
                        rel_fingers = sensor->nbr_fingers;

                for (i = 0; i < rel_fingers; i++)
                        rmi_f11_rel_pos_report(f11, i);
        }

        if (abs_bits) {
                /*
                 * the absolute part is made in 2 parts to allow the kernel
                 * tracking to take place.
                 */
                if (sensor->kernel_tracking)
                        input_mt_assign_slots(sensor->input,
                                              sensor->tracking_slots,
                                              sensor->tracking_pos,
                                              sensor->nbr_fingers,
                                              sensor->dmax);

                for (i = 0; i < abs_fingers; i++) {
                        finger_state = rmi_f11_parse_finger_state(f_state, i);
                        if (finger_state == F11_RESERVED)
                                /* no need to send twice the error */
                                continue;

                        rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
                }

                input_mt_sync_frame(sensor->input);
        }
}

static int f11_2d_construct_data(struct f11_data *f11)
{
        struct rmi_2d_sensor *sensor = &f11->sensor;
        struct f11_2d_sensor_queries *query = &f11->sens_query;
        struct f11_2d_data *data = &f11->data;
        int i;

        sensor->nbr_fingers = (query->nr_fingers == 5 ? 10 :
                                query->nr_fingers + 1);

        sensor->pkt_size = DIV_ROUND_UP(sensor->nbr_fingers, 4);

        if (query->has_abs) {
                sensor->pkt_size += (sensor->nbr_fingers * 5);
                sensor->attn_size = sensor->pkt_size;
        }

        if (query->has_rel)
                sensor->pkt_size +=  (sensor->nbr_fingers * 2);

        /* Check if F11_2D_Query7 is non-zero */
        if (query->query7_nonzero)
                sensor->pkt_size += sizeof(u8);

        /* Check if F11_2D_Query7 or F11_2D_Query8 is non-zero */
        if (query->query7_nonzero || query->query8_nonzero)
                sensor->pkt_size += sizeof(u8);

        if (query->has_pinch || query->has_flick || query->has_rotate) {
                sensor->pkt_size += 3;
                if (!query->has_flick)
                        sensor->pkt_size--;
                if (!query->has_rotate)
                        sensor->pkt_size--;
        }

        if (query->has_touch_shapes)
                sensor->pkt_size +=
                        DIV_ROUND_UP(query->nr_touch_shapes + 1, 8);

        sensor->data_pkt = devm_kzalloc(&sensor->fn->dev, sensor->pkt_size,
                                        GFP_KERNEL);
        if (!sensor->data_pkt)
                return -ENOMEM;

        data->f_state = sensor->data_pkt;
        i = DIV_ROUND_UP(sensor->nbr_fingers, 4);

        if (query->has_abs) {
                data->abs_pos = &sensor->data_pkt[i];
                i += (sensor->nbr_fingers * RMI_F11_ABS_BYTES);
        }

        if (query->has_rel) {
                data->rel_pos = &sensor->data_pkt[i];
                i += (sensor->nbr_fingers * RMI_F11_REL_BYTES);
        }

        if (query->query7_nonzero) {
                data->gest_1 = &sensor->data_pkt[i];
                i++;
        }

        if (query->query7_nonzero || query->query8_nonzero) {
                data->gest_2 = &sensor->data_pkt[i];
                i++;
        }

        if (query->has_pinch) {
                data->pinch = &sensor->data_pkt[i];
                i++;
        }

        if (query->has_flick) {
                if (query->has_pinch) {
                        data->flick = data->pinch;
                        i += 2;
                } else {
                        data->flick = &sensor->data_pkt[i];
                        i += 3;
                }
        }

        if (query->has_rotate) {
                if (query->has_flick) {
                        data->rotate = data->flick + 1;
                } else {
                        data->rotate = &sensor->data_pkt[i];
                        i += 2;
                }
        }

        if (query->has_touch_shapes)
                data->shapes = &sensor->data_pkt[i];

        return 0;
}

static int f11_read_control_regs(struct rmi_function *fn,
                                struct f11_2d_ctrl *ctrl, u16 ctrl_base_addr) {
        struct rmi_device *rmi_dev = fn->rmi_dev;
        int error = 0;

        ctrl->ctrl0_11_address = ctrl_base_addr;
        error = rmi_read_block(rmi_dev, ctrl_base_addr, ctrl->ctrl0_11,
                                RMI_F11_CTRL_REG_COUNT);
        if (error < 0) {
                dev_err(&fn->dev, "Failed to read ctrl0, code: %d.\n", error);
                return error;
        }

        return 0;
}

static int f11_write_control_regs(struct rmi_function *fn,
                                        struct f11_2d_sensor_queries *query,
                                        struct f11_2d_ctrl *ctrl,
                                        u16 ctrl_base_addr)
{
        struct rmi_device *rmi_dev = fn->rmi_dev;
        int error;

        error = rmi_write_block(rmi_dev, ctrl_base_addr, ctrl->ctrl0_11,
                                RMI_F11_CTRL_REG_COUNT);
        if (error < 0)
                return error;

        return 0;
}

static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
                        struct f11_data *f11,
                        struct f11_2d_sensor_queries *sensor_query,
                        u16 query_base_addr)
{
        int query_size;
        int rc;
        u8 query_buf[RMI_F11_QUERY_SIZE];
        bool has_query36 = false;

        rc = rmi_read_block(rmi_dev, query_base_addr, query_buf,
                                RMI_F11_QUERY_SIZE);
        if (rc < 0)
                return rc;

        sensor_query->nr_fingers = query_buf[0] & RMI_F11_NR_FINGERS_MASK;
        sensor_query->has_rel = !!(query_buf[0] & RMI_F11_HAS_REL);
        sensor_query->has_abs = !!(query_buf[0] & RMI_F11_HAS_ABS);
        sensor_query->has_gestures = !!(query_buf[0] & RMI_F11_HAS_GESTURES);
        sensor_query->has_sensitivity_adjust =
                !!(query_buf[0] & RMI_F11_HAS_SENSITIVITY_ADJ);
        sensor_query->configurable = !!(query_buf[0] & RMI_F11_CONFIGURABLE);

        sensor_query->nr_x_electrodes =
                                query_buf[1] & RMI_F11_NR_ELECTRODES_MASK;
        sensor_query->nr_y_electrodes =
                                query_buf[2] & RMI_F11_NR_ELECTRODES_MASK;
        sensor_query->max_electrodes =
                                query_buf[3] & RMI_F11_NR_ELECTRODES_MASK;

        query_size = RMI_F11_QUERY_SIZE;

        if (sensor_query->has_abs) {
                rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
                if (rc < 0)
                        return rc;

                sensor_query->abs_data_size =
                        query_buf[0] & RMI_F11_ABS_DATA_SIZE_MASK;
                sensor_query->has_anchored_finger =
                        !!(query_buf[0] & RMI_F11_HAS_ANCHORED_FINGER);
                sensor_query->has_adj_hyst =
                        !!(query_buf[0] & RMI_F11_HAS_ADJ_HYST);
                sensor_query->has_dribble =
                        !!(query_buf[0] & RMI_F11_HAS_DRIBBLE);
                sensor_query->has_bending_correction =
                        !!(query_buf[0] & RMI_F11_HAS_BENDING_CORRECTION);
                sensor_query->has_large_object_suppression =
                        !!(query_buf[0] & RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION);
                sensor_query->has_jitter_filter =
                        !!(query_buf[0] & RMI_F11_HAS_JITTER_FILTER);
                query_size++;
        }

        if (sensor_query->has_rel) {
                rc = rmi_read(rmi_dev, query_base_addr + query_size,
                                        &sensor_query->f11_2d_query6);
                if (rc < 0)
                        return rc;
                query_size++;
        }

        if (sensor_query->has_gestures) {
                rc = rmi_read_block(rmi_dev, query_base_addr + query_size,
                                        query_buf, RMI_F11_QUERY_GESTURE_SIZE);
                if (rc < 0)
                        return rc;

                sensor_query->has_single_tap =
                        !!(query_buf[0] & RMI_F11_HAS_SINGLE_TAP);
                sensor_query->has_tap_n_hold =
                        !!(query_buf[0] & RMI_F11_HAS_TAP_AND_HOLD);
                sensor_query->has_double_tap =
                        !!(query_buf[0] & RMI_F11_HAS_DOUBLE_TAP);
                sensor_query->has_early_tap =
                        !!(query_buf[0] & RMI_F11_HAS_EARLY_TAP);
                sensor_query->has_flick =
                        !!(query_buf[0] & RMI_F11_HAS_FLICK);
                sensor_query->has_press =
                        !!(query_buf[0] & RMI_F11_HAS_PRESS);
                sensor_query->has_pinch =
                        !!(query_buf[0] & RMI_F11_HAS_PINCH);
                sensor_query->has_chiral =
                        !!(query_buf[0] & RMI_F11_HAS_CHIRAL);

                /* query 8 */
                sensor_query->has_palm_det =
                        !!(query_buf[1] & RMI_F11_HAS_PALM_DET);
                sensor_query->has_rotate =
                        !!(query_buf[1] & RMI_F11_HAS_ROTATE);
                sensor_query->has_touch_shapes =
                        !!(query_buf[1] & RMI_F11_HAS_TOUCH_SHAPES);
                sensor_query->has_scroll_zones =
                        !!(query_buf[1] & RMI_F11_HAS_SCROLL_ZONES);
                sensor_query->has_individual_scroll_zones =
                        !!(query_buf[1] & RMI_F11_HAS_INDIVIDUAL_SCROLL_ZONES);
                sensor_query->has_mf_scroll =
                        !!(query_buf[1] & RMI_F11_HAS_MF_SCROLL);
                sensor_query->has_mf_edge_motion =
                        !!(query_buf[1] & RMI_F11_HAS_MF_EDGE_MOTION);
                sensor_query->has_mf_scroll_inertia =
                        !!(query_buf[1] & RMI_F11_HAS_MF_SCROLL_INERTIA);

                sensor_query->query7_nonzero = !!(query_buf[0]);
                sensor_query->query8_nonzero = !!(query_buf[1]);

                query_size += 2;
        }

        if (f11->has_query9) {
                rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
                if (rc < 0)
                        return rc;

                sensor_query->has_pen =
                        !!(query_buf[0] & RMI_F11_HAS_PEN);
                sensor_query->has_proximity =
                        !!(query_buf[0] & RMI_F11_HAS_PROXIMITY);
                sensor_query->has_palm_det_sensitivity =
                        !!(query_buf[0] & RMI_F11_HAS_PALM_DET_SENSITIVITY);
                sensor_query->has_suppress_on_palm_detect =
                        !!(query_buf[0] & RMI_F11_HAS_SUPPRESS_ON_PALM_DETECT);
                sensor_query->has_two_pen_thresholds =
                        !!(query_buf[0] & RMI_F11_HAS_TWO_PEN_THRESHOLDS);
                sensor_query->has_contact_geometry =
                        !!(query_buf[0] & RMI_F11_HAS_CONTACT_GEOMETRY);
                sensor_query->has_pen_hover_discrimination =
                        !!(query_buf[0] & RMI_F11_HAS_PEN_HOVER_DISCRIMINATION);
                sensor_query->has_pen_filters =
                        !!(query_buf[0] & RMI_F11_HAS_PEN_FILTERS);

                query_size++;
        }

        if (sensor_query->has_touch_shapes) {
                rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
                if (rc < 0)
                        return rc;

                sensor_query->nr_touch_shapes = query_buf[0] &
                                RMI_F11_NR_TOUCH_SHAPES_MASK;

                query_size++;
        }

        if (f11->has_query11) {
                rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
                if (rc < 0)
                        return rc;

                sensor_query->has_z_tuning =
                        !!(query_buf[0] & RMI_F11_HAS_Z_TUNING);
                sensor_query->has_algorithm_selection =
                        !!(query_buf[0] & RMI_F11_HAS_ALGORITHM_SELECTION);
                sensor_query->has_w_tuning =
                        !!(query_buf[0] & RMI_F11_HAS_W_TUNING);
                sensor_query->has_pitch_info =
                        !!(query_buf[0] & RMI_F11_HAS_PITCH_INFO);
                sensor_query->has_finger_size =
                        !!(query_buf[0] & RMI_F11_HAS_FINGER_SIZE);
                sensor_query->has_segmentation_aggressiveness =
                        !!(query_buf[0] &
                                RMI_F11_HAS_SEGMENTATION_AGGRESSIVENESS);
                sensor_query->has_XY_clip =
                        !!(query_buf[0] & RMI_F11_HAS_XY_CLIP);
                sensor_query->has_drumming_filter =
                        !!(query_buf[0] & RMI_F11_HAS_DRUMMING_FILTER);

                query_size++;
        }

        if (f11->has_query12) {
                rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
                if (rc < 0)
                        return rc;

                sensor_query->has_gapless_finger =
                        !!(query_buf[0] & RMI_F11_HAS_GAPLESS_FINGER);
                sensor_query->has_gapless_finger_tuning =
                        !!(query_buf[0] & RMI_F11_HAS_GAPLESS_FINGER_TUNING);
                sensor_query->has_8bit_w =
                        !!(query_buf[0] & RMI_F11_HAS_8BIT_W);
                sensor_query->has_adjustable_mapping =
                        !!(query_buf[0] & RMI_F11_HAS_ADJUSTABLE_MAPPING);
                sensor_query->has_info2 =
                        !!(query_buf[0] & RMI_F11_HAS_INFO2);
                sensor_query->has_physical_props =
                        !!(query_buf[0] & RMI_F11_HAS_PHYSICAL_PROPS);
                sensor_query->has_finger_limit =
                        !!(query_buf[0] & RMI_F11_HAS_FINGER_LIMIT);
                sensor_query->has_linear_coeff_2 =
                        !!(query_buf[0] & RMI_F11_HAS_LINEAR_COEFF);

                query_size++;
        }

        if (sensor_query->has_jitter_filter) {
                rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
                if (rc < 0)
                        return rc;

                sensor_query->jitter_window_size = query_buf[0] &
                        RMI_F11_JITTER_WINDOW_MASK;
                sensor_query->jitter_filter_type = (query_buf[0] &
                        RMI_F11_JITTER_FILTER_MASK) >>
                        RMI_F11_JITTER_FILTER_SHIFT;

                query_size++;
        }

        if (sensor_query->has_info2) {
                rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
                if (rc < 0)
                        return rc;

                sensor_query->light_control =
                        query_buf[0] & RMI_F11_LIGHT_CONTROL_MASK;
                sensor_query->is_clear =
                        !!(query_buf[0] & RMI_F11_IS_CLEAR);
                sensor_query->clickpad_props =
                        (query_buf[0] & RMI_F11_CLICKPAD_PROPS_MASK) >>
                        RMI_F11_CLICKPAD_PROPS_SHIFT;
                sensor_query->mouse_buttons =
                        (query_buf[0] & RMI_F11_MOUSE_BUTTONS_MASK) >>
                        RMI_F11_MOUSE_BUTTONS_SHIFT;
                sensor_query->has_advanced_gestures =
                        !!(query_buf[0] & RMI_F11_HAS_ADVANCED_GESTURES);

                query_size++;
        }

        if (sensor_query->has_physical_props) {
                rc = rmi_read_block(rmi_dev, query_base_addr
                        + query_size, query_buf, 4);
                if (rc < 0)
                        return rc;

                sensor_query->x_sensor_size_mm =
                        (query_buf[0] | (query_buf[1] << 8)) / 10;
                sensor_query->y_sensor_size_mm =
                        (query_buf[2] | (query_buf[3] << 8)) / 10;

                /*
                 * query 15 - 18 contain the size of the sensor
                 * and query 19 - 26 contain bezel dimensions
                 */
                query_size += 12;
        }

        if (f11->has_query27)
                ++query_size;

        if (f11->has_query28) {
                rc = rmi_read(rmi_dev, query_base_addr + query_size,
                                query_buf);
                if (rc < 0)
                        return rc;

                has_query36 = !!(query_buf[0] & BIT(6));
        }

        if (has_query36) {
                query_size += 2;
                rc = rmi_read(rmi_dev, query_base_addr + query_size,
                                query_buf);
                if (rc < 0)
                        return rc;

                if (!!(query_buf[0] & BIT(5)))
                        f11->has_acm = true;
        }

        return query_size;
}

static int rmi_f11_initialize(struct rmi_function *fn)
{
        struct rmi_device *rmi_dev = fn->rmi_dev;
        struct f11_data *f11;
        struct f11_2d_ctrl *ctrl;
        u8 query_offset;
        u16 query_base_addr;
        u16 control_base_addr;
        u16 max_x_pos, max_y_pos;
        int rc;
        const struct rmi_device_platform_data *pdata =
                                rmi_get_platform_data(rmi_dev);
        struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
        struct rmi_2d_sensor *sensor;
        u8 buf;
        int mask_size;

        rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Initializing F11 values.\n");

        mask_size = BITS_TO_LONGS(drvdata->irq_count) * sizeof(unsigned long);

        /*
        ** init instance data, fill in values and create any sysfs files
        */
        f11 = devm_kzalloc(&fn->dev, sizeof(struct f11_data) + mask_size * 3,
                        GFP_KERNEL);
        if (!f11)
                return -ENOMEM;

        if (fn->dev.of_node) {
                rc = rmi_2d_sensor_of_probe(&fn->dev, &f11->sensor_pdata);
                if (rc)
                        return rc;
        } else {
                f11->sensor_pdata = pdata->sensor_pdata;
        }

        f11->rezero_wait_ms = f11->sensor_pdata.rezero_wait;

        f11->abs_mask = (unsigned long *)((char *)f11
                        + sizeof(struct f11_data));
        f11->rel_mask = (unsigned long *)((char *)f11
                        + sizeof(struct f11_data) + mask_size);
        f11->result_bits = (unsigned long *)((char *)f11
                        + sizeof(struct f11_data) + mask_size * 2);

        set_bit(fn->irq_pos, f11->abs_mask);
        set_bit(fn->irq_pos + 1, f11->rel_mask);

        query_base_addr = fn->fd.query_base_addr;
        control_base_addr = fn->fd.control_base_addr;

        rc = rmi_read(rmi_dev, query_base_addr, &buf);
        if (rc < 0)
                return rc;

        f11->has_query9 = !!(buf & RMI_F11_HAS_QUERY9);
        f11->has_query11 = !!(buf & RMI_F11_HAS_QUERY11);
        f11->has_query12 = !!(buf & RMI_F11_HAS_QUERY12);
        f11->has_query27 = !!(buf & RMI_F11_HAS_QUERY27);
        f11->has_query28 = !!(buf & RMI_F11_HAS_QUERY28);

        query_offset = (query_base_addr + 1);
        sensor = &f11->sensor;
        sensor->fn = fn;

        rc = rmi_f11_get_query_parameters(rmi_dev, f11,
                        &f11->sens_query, query_offset);
        if (rc < 0)
                return rc;
        query_offset += rc;

        rc = f11_read_control_regs(fn, &f11->dev_controls,
                        control_base_addr);
        if (rc < 0) {
                dev_err(&fn->dev,
                        "Failed to read F11 control params.\n");
                return rc;
        }

        if (f11->sens_query.has_info2) {
                if (f11->sens_query.is_clear)
                        f11->sensor.sensor_type = rmi_sensor_touchscreen;
                else
                        f11->sensor.sensor_type = rmi_sensor_touchpad;
        }

        sensor->report_abs = f11->sens_query.has_abs;

        sensor->axis_align =
                f11->sensor_pdata.axis_align;

        sensor->topbuttonpad = f11->sensor_pdata.topbuttonpad;
        sensor->kernel_tracking = f11->sensor_pdata.kernel_tracking;
        sensor->dmax = f11->sensor_pdata.dmax;
        sensor->dribble = f11->sensor_pdata.dribble;
        sensor->palm_detect = f11->sensor_pdata.palm_detect;

        if (f11->sens_query.has_physical_props) {
                sensor->x_mm = f11->sens_query.x_sensor_size_mm;
                sensor->y_mm = f11->sens_query.y_sensor_size_mm;
        } else {
                sensor->x_mm = f11->sensor_pdata.x_mm;
                sensor->y_mm = f11->sensor_pdata.y_mm;
        }

        if (sensor->sensor_type == rmi_sensor_default)
                sensor->sensor_type =
                        f11->sensor_pdata.sensor_type;

        sensor->report_abs = sensor->report_abs
                && !(f11->sensor_pdata.disable_report_mask
                        & RMI_F11_DISABLE_ABS_REPORT);

        if (!sensor->report_abs)
                /*
                 * If device doesn't have abs or if it has been disables
                 * fallback to reporting rel data.
                 */
                sensor->report_rel = f11->sens_query.has_rel;

        rc = rmi_read_block(rmi_dev,
                control_base_addr + F11_CTRL_SENSOR_MAX_X_POS_OFFSET,
                (u8 *)&max_x_pos, sizeof(max_x_pos));
        if (rc < 0)
                return rc;

        rc = rmi_read_block(rmi_dev,
                control_base_addr + F11_CTRL_SENSOR_MAX_Y_POS_OFFSET,
                (u8 *)&max_y_pos, sizeof(max_y_pos));
        if (rc < 0)
                return rc;

        sensor->max_x = max_x_pos;
        sensor->max_y = max_y_pos;

        rc = f11_2d_construct_data(f11);
        if (rc < 0)
                return rc;

        if (f11->has_acm)
                f11->sensor.attn_size += f11->sensor.nbr_fingers * 2;

        /* allocate the in-kernel tracking buffers */
        sensor->tracking_pos = devm_kzalloc(&fn->dev,
                        sizeof(struct input_mt_pos) * sensor->nbr_fingers,
                        GFP_KERNEL);
        sensor->tracking_slots = devm_kzalloc(&fn->dev,
                        sizeof(int) * sensor->nbr_fingers, GFP_KERNEL);
        sensor->objs = devm_kzalloc(&fn->dev,
                        sizeof(struct rmi_2d_sensor_abs_object)
                        * sensor->nbr_fingers, GFP_KERNEL);
        if (!sensor->tracking_pos || !sensor->tracking_slots || !sensor->objs)
                return -ENOMEM;

        ctrl = &f11->dev_controls;
        if (sensor->axis_align.delta_x_threshold)
                ctrl->ctrl0_11[RMI_F11_DELTA_X_THRESHOLD] =
                        sensor->axis_align.delta_x_threshold;

        if (sensor->axis_align.delta_y_threshold)
                ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD] =
                        sensor->axis_align.delta_y_threshold;

        if (f11->sens_query.has_dribble) {
                switch (sensor->dribble) {
                case RMI_REG_STATE_OFF:
                        ctrl->ctrl0_11[0] &= ~BIT(6);
                        break;
                case RMI_REG_STATE_ON:
                        ctrl->ctrl0_11[0] |= BIT(6);
                        break;
                case RMI_REG_STATE_DEFAULT:
                default:
                        break;
                }
        }

        if (f11->sens_query.has_palm_det) {
                switch (sensor->palm_detect) {
                case RMI_REG_STATE_OFF:
                        ctrl->ctrl0_11[11] &= ~BIT(0);
                        break;
                case RMI_REG_STATE_ON:
                        ctrl->ctrl0_11[11] |= BIT(0);
                        break;
                case RMI_REG_STATE_DEFAULT:
                default:
                        break;
                }
        }

        rc = f11_write_control_regs(fn, &f11->sens_query,
                           &f11->dev_controls, fn->fd.query_base_addr);
        if (rc)
                dev_warn(&fn->dev, "Failed to write control registers\n");

        mutex_init(&f11->dev_controls_mutex);

        dev_set_drvdata(&fn->dev, f11);

        return 0;
}

static int rmi_f11_config(struct rmi_function *fn)
{
        struct f11_data *f11 = dev_get_drvdata(&fn->dev);
        struct rmi_driver *drv = fn->rmi_dev->driver;
        struct rmi_2d_sensor *sensor = &f11->sensor;
        int rc;

        if (!sensor->report_abs)
                drv->clear_irq_bits(fn->rmi_dev, f11->abs_mask);
        else
                drv->set_irq_bits(fn->rmi_dev, f11->abs_mask);

        if (!sensor->report_rel)
                drv->clear_irq_bits(fn->rmi_dev, f11->rel_mask);
        else
                drv->set_irq_bits(fn->rmi_dev, f11->rel_mask);

        rc = f11_write_control_regs(fn, &f11->sens_query,
                           &f11->dev_controls, fn->fd.query_base_addr);
        if (rc < 0)
                return rc;

        return 0;
}

static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
{
        struct rmi_device *rmi_dev = fn->rmi_dev;
        struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
        struct f11_data *f11 = dev_get_drvdata(&fn->dev);
        u16 data_base_addr = fn->fd.data_base_addr;
        int error;
        int valid_bytes = f11->sensor.pkt_size;

        if (drvdata->attn_data.data) {
                /*
                 * The valid data in the attention report is less then
                 * expected. Only process the complete fingers.
                 */
                if (f11->sensor.attn_size > drvdata->attn_data.size)
                        valid_bytes = drvdata->attn_data.size;
                else
                        valid_bytes = f11->sensor.attn_size;
                memcpy(f11->sensor.data_pkt, drvdata->attn_data.data,
                        valid_bytes);
                drvdata->attn_data.data += f11->sensor.attn_size;
                drvdata->attn_data.size -= f11->sensor.attn_size;
        } else {
                error = rmi_read_block(rmi_dev,
                                data_base_addr, f11->sensor.data_pkt,
                                f11->sensor.pkt_size);
                if (error < 0)
                        return error;
        }

        rmi_f11_finger_handler(f11, &f11->sensor, irq_bits,
                                drvdata->num_of_irq_regs, valid_bytes);

        return 0;
}

static int rmi_f11_resume(struct rmi_function *fn)
{
        struct f11_data *f11 = dev_get_drvdata(&fn->dev);
        int error;

        rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Resuming...\n");
        if (!f11->rezero_wait_ms)
                return 0;

        mdelay(f11->rezero_wait_ms);

        error = rmi_write(fn->rmi_dev, fn->fd.command_base_addr,
                                RMI_F11_REZERO);
        if (error) {
                dev_err(&fn->dev,
                        "%s: failed to issue rezero command, error = %d.",
                        __func__, error);
                return error;
        }

        return 0;
}

static int rmi_f11_probe(struct rmi_function *fn)
{
        int error;
        struct f11_data *f11;

        error = rmi_f11_initialize(fn);
        if (error)
                return error;

        f11 = dev_get_drvdata(&fn->dev);
        error = rmi_2d_sensor_configure_input(fn, &f11->sensor);
        if (error)
                return error;

        return 0;
}

struct rmi_function_handler rmi_f11_handler = {
        .driver = {
                .name   = "rmi4_f11",
        },
        .func           = 0x11,
        .probe          = rmi_f11_probe,
        .config         = rmi_f11_config,
        .attention      = rmi_f11_attention,
        .resume         = rmi_f11_resume,
};