drivers/input/serio/Kconfig

   1 #
   2 # Input core configuration
   3 #
   4 config SERIO
   5         tristate "Serial I/O support" if EMBEDDED || !X86
   6         default y
   7         ---help---
   8           Say Yes here if you have any input device that uses serial I/O to
   9           communicate with the system. This includes the
  10                         * standard AT keyboard and PS/2 mouse *
  11           as well as serial mice, Sun keyboards, some joysticks and 6dof
  12           devices and more.
  13
  14           If unsure, say Y.
  15
  16           To compile this driver as a module, choose M here: the
  17           module will be called serio.
  18
  19 if SERIO
  20
  21 config SERIO_I8042
  22         tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
  23         default y
  24         depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K
  25         ---help---
  26           i8042 is the chip over which the standard AT keyboard and PS/2
  27           mouse are connected to the computer. If you use these devices,
  28           you'll need to say Y here.
  29
  30           If unsure, say Y.
  31
  32           To compile this driver as a module, choose M here: the
  33           module will be called i8042.
  34
  35 config SERIO_SERPORT
  36         tristate "Serial port line discipline"
  37         default y
  38         ---help---
  39           Say Y here if you plan to use an input device (mouse, joystick,
  40           tablet, 6dof) that communicates over the RS232 serial (COM) port.
  41
  42           More information is available: <file:Documentation/input/input.txt>
  43
  44           If unsure, say Y.
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called serport.
  48
  49 config SERIO_CT82C710
  50         tristate "ct82c710 Aux port controller"
  51         depends on X86
  52         ---help---
  53           Say Y here if you have a Texas Instruments TravelMate notebook
  54           equipped with the ct82c710 chip and want to use a mouse connected
  55           to the "QuickPort".
  56
  57           If unsure, say N.
  58
  59           To compile this driver as a module, choose M here: the
  60           module will be called ct82c710.
  61
  62 config SERIO_Q40KBD
  63         tristate "Q40 keyboard controller"
  64         depends on Q40
  65
  66 config SERIO_PARKBD
  67         tristate "Parallel port keyboard adapter"
  68         depends on PARPORT
  69         ---help---
  70           Say Y here if you built a simple parallel port adapter to attach
  71           an additional AT keyboard, XT keyboard or PS/2 mouse.
  72
  73           More information is available: <file:Documentation/input/input.txt>
  74
  75           If unsure, say N.
  76
  77           To compile this driver as a module, choose M here: the
  78           module will be called parkbd.
  79
  80 config SERIO_RPCKBD
  81         tristate "Acorn RiscPC keyboard controller"
  82         depends on ARCH_ACORN || ARCH_CLPS7500
  83         default y
  84         help
  85           Say Y here if you have the Acorn RiscPC and want to use an AT
  86           keyboard connected to its keyboard controller.
  87
  88           To compile this driver as a module, choose M here: the
  89           module will be called rpckbd.
  90
  91 config SERIO_AMBAKMI
  92         tristate "AMBA KMI keyboard controller"
  93         depends on ARM_AMBA
  94
  95 config SERIO_SA1111
  96         tristate "Intel SA1111 keyboard controller"
  97         depends on SA1111
  98
  99 config SERIO_GSCPS2
 100         tristate "HP GSC PS/2 keyboard and PS/2 mouse controller"
 101         depends on GSC
 102         default y
 103         help
 104           This driver provides support for the PS/2 ports on PA-RISC machines
 105           over which HP PS/2 keyboards and PS/2 mice may be connected.
 106           If you use these devices, you'll need to say Y here.
 107
 108           It's safe to enable this driver, so if unsure, say Y.
 109
 110           To compile this driver as a module, choose M here: the
 111           module will be called gscps2.
 112
 113 config HP_SDC
 114         tristate "HP System Device Controller i8042 Support"
 115         depends on GSC && SERIO
 116         default y
 117         ---help---
 118           This option enables supports for the the "System Device
 119           Controller", an i8042 carrying microcode to manage a
 120           few miscellanous devices on some Hewlett Packard systems.
 121           The SDC itself contains a 10ms resolution timer/clock capable
 122           of delivering interrupts on a periodic and one-shot basis.
 123           The SDC may also be connected to a battery-backed real-time
 124           clock, a basic audio waveform generator, and an HP-HIL Master
 125           Link Controller serving up to seven input devices.
 126
 127           By itself this option is rather useless, but enabling it will
 128           enable selection of drivers for the abovementioned devices.
 129           It is, however, incompatible with the old, reliable HIL keyboard
 130           driver, and the new HIL driver is experimental, so if you plan
 131           to use a HIL keyboard as your primary keyboard, you may wish
 132           to keep using that driver until the new HIL drivers have had
 133           more testing.
 134
 135 config HIL_MLC
 136         tristate "HIL MLC Support (needed for HIL input devices)"
 137         depends on HP_SDC
 138
 139 config SERIO_PCIPS2
 140         tristate "PCI PS/2 keyboard and PS/2 mouse controller"
 141         depends on PCI
 142         help
 143           Say Y here if you have a Mobility Docking station with PS/2
 144           keyboard and mice ports.
 145
 146           To compile this driver as a module, choose M here: the
 147           module will be called pcips2.
 148
 149 config SERIO_MACEPS2
 150         tristate "SGI O2 MACE PS/2 controller"
 151         depends on SGI_IP32
 152         help
 153           Say Y here if you have SGI O2 workstation and want to use its
 154           PS/2 ports.
 155
 156           To compile this driver as a module, choose M here: the
 157           module will be called maceps2.
 158
 159 config SERIO_LIBPS2
 160         tristate "PS/2 driver library" if EMBEDDED
 161         help
 162           Say Y here if you are using a driver for device connected
 163           to a PS/2 port, such as PS/2 mouse or standard AT keyboard.
 164
 165           To compile this driver as a module, choose M here: the
 166           module will be called libps2.
 167
 168 config SERIO_RAW
 169         tristate "Raw access to serio ports"
 170         help
 171           Say Y here if you want to have raw access to serio ports, such as
 172           AUX ports on i8042 keyboard controller. Each serio port that is
 173           bound to this driver will be accessible via a char device with
 174           major 10 and dynamically allocated minor. The driver will try
 175           allocating minor 1 (that historically corresponds to /dev/psaux)
 176           first. To bind this driver to a serio port use sysfs interface:
 177
 178               echo -n "serio_raw" > /sys/bus/serio/devices/serioX/driver
 179
 180           To compile this driver as a module, choose M here: the
 181           module will be called serio_raw.
 182
 183 endif