drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_PROPERTIES
  15         def_tristate INPUT
  16         depends on INPUT
  17
  18 config TOUCHSCREEN_88PM860X
  19         tristate "Marvell 88PM860x touchscreen"
  20         depends on MFD_88PM860X
  21         help
  22           Say Y here if you have a 88PM860x PMIC and want to enable
  23           support for the built-in touchscreen.
  24
  25           If unsure, say N.
  26
  27           To compile this driver as a module, choose M here: the
  28           module will be called 88pm860x-ts.
  29
  30 config TOUCHSCREEN_ADS7846
  31         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  32         depends on SPI_MASTER
  33         depends on HWMON = n || HWMON
  34         help
  35           Say Y here if you have a touchscreen interface using the
  36           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  37           and your board-specific setup code includes that in its
  38           table of SPI devices.
  39
  40           If HWMON is selected, and the driver is told the reference voltage
  41           on your board, you will also get hwmon interfaces for the voltage
  42           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  43
  44           If unsure, say N (but it's safe to say "Y").
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called ads7846.
  48
  49 config TOUCHSCREEN_AD7877
  50         tristate "AD7877 based touchscreens"
  51         depends on SPI_MASTER
  52         help
  53           Say Y here if you have a touchscreen interface using the
  54           AD7877 controller, and your board-specific initialization
  55           code includes that in its table of SPI devices.
  56
  57           If unsure, say N (but it's safe to say "Y").
  58
  59           To compile this driver as a module, choose M here: the
  60           module will be called ad7877.
  61
  62 config TOUCHSCREEN_AD7879
  63         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  64         help
  65           Say Y here if you want to support a touchscreen interface using
  66           the AD7879-1/AD7889-1 controller.
  67
  68           You should select a bus connection too.
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ad7879.
  72
  73 config TOUCHSCREEN_AD7879_I2C
  74         tristate "support I2C bus connection"
  75         depends on TOUCHSCREEN_AD7879 && I2C
  76         select REGMAP_I2C
  77         help
  78           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  79
  80           To compile this driver as a module, choose M here: the
  81           module will be called ad7879-i2c.
  82
  83 config TOUCHSCREEN_AD7879_SPI
  84         tristate "support SPI bus connection"
  85         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  86         select REGMAP_SPI
  87         help
  88           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  89
  90           If unsure, say N (but it's safe to say "Y").
  91
  92           To compile this driver as a module, choose M here: the
  93           module will be called ad7879-spi.
  94
  95 config TOUCHSCREEN_AR1021_I2C
  96         tristate "Microchip AR1021 i2c touchscreen"
  97         depends on I2C && OF
  98         help
  99           Say Y here if you have the Microchip AR1021 touchscreen controller
 100           chip in your system.
 101
 102           If unsure, say N.
 103
 104           To compile this driver as a module, choose M here: the
 105           module will be called ar1021_i2c.
 106
 107 config TOUCHSCREEN_ATMEL_MXT
 108         tristate "Atmel mXT I2C Touchscreen"
 109         depends on I2C
 110         select FW_LOADER
 111         help
 112           Say Y here if you have Atmel mXT series I2C touchscreen,
 113           such as AT42QT602240/ATMXT224, connected to your system.
 114
 115           If unsure, say N.
 116
 117           To compile this driver as a module, choose M here: the
 118           module will be called atmel_mxt_ts.
 119
 120 config TOUCHSCREEN_ATMEL_MXT_T37
 121         bool "Support T37 Diagnostic Data"
 122         depends on TOUCHSCREEN_ATMEL_MXT
 123         depends on VIDEO_V4L2=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_V4L2=m)
 124         select VIDEOBUF2_VMALLOC
 125         help
 126           Say Y here if you want support to output data from the T37
 127           Diagnostic Data object using a V4L device.
 128
 129 config TOUCHSCREEN_AUO_PIXCIR
 130         tristate "AUO in-cell touchscreen using Pixcir ICs"
 131         depends on I2C
 132         depends on GPIOLIB || COMPILE_TEST
 133         help
 134           Say Y here if you have a AUO display with in-cell touchscreen
 135           using Pixcir ICs.
 136
 137           If unsure, say N.
 138
 139           To compile this driver as a module, choose M here: the
 140           module will be called auo-pixcir-ts.
 141
 142 config TOUCHSCREEN_BU21013
 143         tristate "BU21013 based touch panel controllers"
 144         depends on I2C
 145         help
 146           Say Y here if you have a bu21013 touchscreen connected to
 147           your system.
 148
 149           If unsure, say N.
 150
 151           To compile this driver as a module, choose M here: the
 152           module will be called bu21013_ts.
 153
 154 config TOUCHSCREEN_CHIPONE_ICN8318
 155         tristate "chipone icn8318 touchscreen controller"
 156         depends on GPIOLIB || COMPILE_TEST
 157         depends on I2C
 158         depends on OF
 159         help
 160           Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
 161
 162           If unsure, say N.
 163
 164           To compile this driver as a module, choose M here: the
 165           module will be called chipone_icn8318.
 166
 167 config TOUCHSCREEN_CY8CTMG110
 168         tristate "cy8ctmg110 touchscreen"
 169         depends on I2C
 170         depends on GPIOLIB || COMPILE_TEST
 171         help
 172           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 173           an AAVA device.
 174
 175           If unsure, say N.
 176
 177           To compile this driver as a module, choose M here: the
 178           module will be called cy8ctmg110_ts.
 179
 180 config TOUCHSCREEN_CYTTSP_CORE
 181         tristate "Cypress TTSP touchscreen"
 182         help
 183           Say Y here if you have a touchscreen using controller from
 184           the Cypress TrueTouch(tm) Standard Product family connected
 185           to your system. You will also need to select appropriate
 186           bus connection below.
 187
 188           If unsure, say N.
 189
 190           To compile this driver as a module, choose M here: the
 191           module will be called cyttsp_core.
 192
 193 config TOUCHSCREEN_CYTTSP_I2C
 194         tristate "support I2C bus connection"
 195         depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 196         help
 197           Say Y here if the touchscreen is connected via I2C bus.
 198
 199           To compile this driver as a module, choose M here: the
 200           module will be called cyttsp_i2c.
 201
 202 config TOUCHSCREEN_CYTTSP_SPI
 203         tristate "support SPI bus connection"
 204         depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 205         help
 206           Say Y here if the touchscreen is connected via SPI bus.
 207
 208           To compile this driver as a module, choose M here: the
 209           module will be called cyttsp_spi.
 210
 211 config TOUCHSCREEN_CYTTSP4_CORE
 212         tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 213         help
 214           Core driver for Cypress TrueTouch(tm) Standard Product
 215           Generation4 touchscreen controllers.
 216
 217           Say Y here if you have a Cypress Gen4 touchscreen.
 218
 219           If unsure, say N.
 220
 221           To compile this driver as a module, choose M here.
 222
 223 config TOUCHSCREEN_CYTTSP4_I2C
 224         tristate "support I2C bus connection"
 225         depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 226         help
 227           Say Y here if the touchscreen is connected via I2C bus.
 228
 229           To compile this driver as a module, choose M here: the
 230           module will be called cyttsp4_i2c.
 231
 232 config TOUCHSCREEN_CYTTSP4_SPI
 233         tristate "support SPI bus connection"
 234         depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 235         help
 236           Say Y here if the touchscreen is connected via SPI bus.
 237
 238           To compile this driver as a module, choose M here: the
 239           module will be called cyttsp4_spi.
 240
 241 config TOUCHSCREEN_DA9034
 242         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 243         depends on PMIC_DA903X
 244         default y
 245         help
 246           Say Y here to enable the support for the touchscreen found
 247           on Dialog Semiconductor DA9034 PMIC.
 248
 249           If unsure, say N.
 250
 251           To compile this driver as a module, choose M here: the
 252           module will be called da9034-ts.
 253
 254 config TOUCHSCREEN_DA9052
 255         tristate "Dialog DA9052/DA9053 TSI"
 256         depends on PMIC_DA9052
 257         help
 258           Say Y here to support the touchscreen found on Dialog Semiconductor
 259           DA9052-BC and DA9053-AA/Bx PMICs.
 260
 261           If unsure, say N.
 262
 263           To compile this driver as a module, choose M here: the
 264           module will be called da9052_tsi.
 265
 266 config TOUCHSCREEN_DYNAPRO
 267         tristate "Dynapro serial touchscreen"
 268         select SERIO
 269         help
 270           Say Y here if you have a Dynapro serial touchscreen connected to
 271           your system.
 272
 273           If unsure, say N.
 274
 275           To compile this driver as a module, choose M here: the
 276           module will be called dynapro.
 277
 278 config TOUCHSCREEN_HAMPSHIRE
 279         tristate "Hampshire serial touchscreen"
 280         select SERIO
 281         help
 282           Say Y here if you have a Hampshire serial touchscreen connected to
 283           your system.
 284
 285           If unsure, say N.
 286
 287           To compile this driver as a module, choose M here: the
 288           module will be called hampshire.
 289
 290 config TOUCHSCREEN_EETI
 291         tristate "EETI touchscreen panel support"
 292         depends on I2C
 293         help
 294           Say Y here to enable support for I2C connected EETI touch panels.
 295
 296           To compile this driver as a module, choose M here: the
 297           module will be called eeti_ts.
 298
 299 config TOUCHSCREEN_EGALAX
 300         tristate "EETI eGalax multi-touch panel support"
 301         depends on I2C && OF
 302         help
 303           Say Y here to enable support for I2C connected EETI
 304           eGalax multi-touch panels.
 305
 306           To compile this driver as a module, choose M here: the
 307           module will be called egalax_ts.
 308
 309 config TOUCHSCREEN_EGALAX_SERIAL
 310         tristate "EETI eGalax serial touchscreen"
 311         select SERIO
 312         help
 313           Say Y here to enable support for serial connected EETI
 314           eGalax touch panels.
 315
 316           To compile this driver as a module, choose M here: the
 317           module will be called egalax_ts_serial.
 318
 319 config TOUCHSCREEN_FUJITSU
 320         tristate "Fujitsu serial touchscreen"
 321         select SERIO
 322         help
 323           Say Y here if you have the Fujitsu touchscreen (such as one
 324           installed in Lifebook P series laptop) connected to your
 325           system.
 326
 327           If unsure, say N.
 328
 329           To compile this driver as a module, choose M here: the
 330           module will be called fujitsu-ts.
 331
 332 config TOUCHSCREEN_GOODIX
 333         tristate "Goodix I2C touchscreen"
 334         depends on I2C
 335         depends on GPIOLIB || COMPILE_TEST
 336         help
 337           Say Y here if you have the Goodix touchscreen (such as one
 338           installed in Onda v975w tablets) connected to your
 339           system. It also supports 5-finger chip models, which can be
 340           found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 341
 342           If unsure, say N.
 343
 344           To compile this driver as a module, choose M here: the
 345           module will be called goodix.
 346
 347 config TOUCHSCREEN_ILI210X
 348         tristate "Ilitek ILI210X based touchscreen"
 349         depends on I2C
 350         help
 351           Say Y here if you have a ILI210X based touchscreen
 352           controller. This driver supports models ILI2102,
 353           ILI2102s, ILI2103, ILI2103s and ILI2105.
 354           Such kind of chipsets can be found in Amazon Kindle Fire
 355           touchscreens.
 356
 357           If unsure, say N.
 358
 359           To compile this driver as a module, choose M here: the
 360           module will be called ili210x.
 361
 362 config TOUCHSCREEN_IPROC
 363         tristate "IPROC touch panel driver support"
 364         depends on ARCH_BCM_IPROC || COMPILE_TEST
 365         help
 366           Say Y here if you want to add support for the IPROC touch
 367           controller to your system.
 368
 369           If unsure, say N.
 370
 371           To compile this driver as a module, choose M here: the
 372           module will be called bcm_iproc_tsc.
 373
 374 config TOUCHSCREEN_S3C2410
 375         tristate "Samsung S3C2410/generic touchscreen input driver"
 376         depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 377         depends on S3C_ADC
 378         help
 379           Say Y here if you have the s3c2410 touchscreen.
 380
 381           If unsure, say N.
 382
 383           To compile this driver as a module, choose M here: the
 384           module will be called s3c2410_ts.
 385
 386 config TOUCHSCREEN_GUNZE
 387         tristate "Gunze AHL-51S touchscreen"
 388         select SERIO
 389         help
 390           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 391           your system.
 392
 393           If unsure, say N.
 394
 395           To compile this driver as a module, choose M here: the
 396           module will be called gunze.
 397
 398 config TOUCHSCREEN_EKTF2127
 399         tristate "Elan eKTF2127 I2C touchscreen"
 400         depends on I2C
 401         help
 402           Say Y here if you have an Elan eKTF2127 touchscreen
 403           connected to your system.
 404
 405           If unsure, say N.
 406
 407           To compile this driver as a module, choose M here: the
 408           module will be called ektf2127.
 409
 410 config TOUCHSCREEN_ELAN
 411         tristate "Elan eKTH I2C touchscreen"
 412         depends on I2C
 413         help
 414           Say Y here if you have an Elan eKTH I2C touchscreen
 415           connected to your system.
 416
 417           If unsure, say N.
 418
 419           To compile this driver as a module, choose M here: the
 420           module will be called elants_i2c.
 421
 422 config TOUCHSCREEN_ELO
 423         tristate "Elo serial touchscreens"
 424         select SERIO
 425         help
 426           Say Y here if you have an Elo serial touchscreen connected to
 427           your system.
 428
 429           If unsure, say N.
 430
 431           To compile this driver as a module, choose M here: the
 432           module will be called elo.
 433
 434 config TOUCHSCREEN_WACOM_W8001
 435         tristate "Wacom W8001 penabled serial touchscreen"
 436         select SERIO
 437         help
 438           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 439           connected to your system.
 440
 441           If unsure, say N.
 442
 443           To compile this driver as a module, choose M here: the
 444           module will be called wacom_w8001.
 445
 446 config TOUCHSCREEN_WACOM_I2C
 447         tristate "Wacom Tablet support (I2C)"
 448         depends on I2C
 449         help
 450           Say Y here if you want to use the I2C version of the Wacom
 451           Pen Tablet.
 452
 453           If unsure, say N.
 454
 455           To compile this driver as a module, choose M here: the module
 456           will be called wacom_i2c.
 457
 458 config TOUCHSCREEN_LPC32XX
 459         tristate "LPC32XX touchscreen controller"
 460         depends on ARCH_LPC32XX
 461         help
 462           Say Y here if you have a LPC32XX device and want
 463           to support the built-in touchscreen.
 464
 465           To compile this driver as a module, choose M here: the
 466           module will be called lpc32xx_ts.
 467
 468 config TOUCHSCREEN_MAX11801
 469         tristate "MAX11801 based touchscreens"
 470         depends on I2C
 471         help
 472           Say Y here if you have a MAX11801 based touchscreen
 473           controller.
 474
 475           If unsure, say N.
 476
 477           To compile this driver as a module, choose M here: the
 478           module will be called max11801_ts.
 479
 480 config TOUCHSCREEN_MCS5000
 481         tristate "MELFAS MCS-5000 touchscreen"
 482         depends on I2C
 483         help
 484           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 485           chip in your system.
 486
 487           If unsure, say N.
 488
 489           To compile this driver as a module, choose M here: the
 490           module will be called mcs5000_ts.
 491
 492 config TOUCHSCREEN_MMS114
 493         tristate "MELFAS MMS114 touchscreen"
 494         depends on I2C
 495         help
 496           Say Y here if you have the MELFAS MMS114 touchscreen controller
 497           chip in your system.
 498
 499           If unsure, say N.
 500
 501           To compile this driver as a module, choose M here: the
 502           module will be called mms114.
 503
 504 config TOUCHSCREEN_MELFAS_MIP4
 505         tristate "MELFAS MIP4 Touchscreen"
 506         depends on I2C
 507         help
 508           Say Y here if you have a MELFAS MIP4 Touchscreen device.
 509
 510           If unsure, say N.
 511
 512           To compile this driver as a module, choose M here:
 513           the module will be called melfas_mip4.
 514
 515 config TOUCHSCREEN_MTOUCH
 516         tristate "MicroTouch serial touchscreens"
 517         select SERIO
 518         help
 519           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 520           your system.
 521
 522           If unsure, say N.
 523
 524           To compile this driver as a module, choose M here: the
 525           module will be called mtouch.
 526
 527 config TOUCHSCREEN_IMX6UL_TSC
 528         tristate "Freescale i.MX6UL touchscreen controller"
 529         depends on (OF && GPIOLIB) || COMPILE_TEST
 530         help
 531           Say Y here if you have a Freescale i.MX6UL, and want to
 532           use the internal touchscreen controller.
 533
 534           If unsure, say N.
 535
 536           To compile this driver as a module, choose M here: the
 537           module will be called imx6ul_tsc.
 538
 539 config TOUCHSCREEN_INEXIO
 540         tristate "iNexio serial touchscreens"
 541         select SERIO
 542         help
 543           Say Y here if you have an iNexio serial touchscreen connected to
 544           your system.
 545
 546           If unsure, say N.
 547
 548           To compile this driver as a module, choose M here: the
 549           module will be called inexio.
 550
 551 config TOUCHSCREEN_MK712
 552         tristate "ICS MicroClock MK712 touchscreen"
 553         help
 554           Say Y here if you have the ICS MicroClock MK712 touchscreen
 555           controller chip in your system.
 556
 557           If unsure, say N.
 558
 559           To compile this driver as a module, choose M here: the
 560           module will be called mk712.
 561
 562 config TOUCHSCREEN_HP600
 563         tristate "HP Jornada 6xx touchscreen"
 564         depends on SH_HP6XX && SH_ADC
 565         help
 566           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 567           support the built-in touchscreen.
 568
 569           To compile this driver as a module, choose M here: the
 570           module will be called hp680_ts_input.
 571
 572 config TOUCHSCREEN_HP7XX
 573         tristate "HP Jornada 7xx touchscreen"
 574         depends on SA1100_JORNADA720_SSP
 575         help
 576           Say Y here if you have a HP Jornada 710/720/728 and want
 577           to support the built-in touchscreen.
 578
 579           To compile this driver as a module, choose M here: the
 580           module will be called jornada720_ts.
 581
 582 config TOUCHSCREEN_IPAQ_MICRO
 583         tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 584         depends on MFD_IPAQ_MICRO
 585         help
 586           Say Y here to enable support for the touchscreen attached to
 587           the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 588
 589           If unsure, say N.
 590
 591           To compile this driver as a module, choose M here: the
 592           module will be called ipaq-micro-ts.
 593
 594 config TOUCHSCREEN_HTCPEN
 595         tristate "HTC Shift X9500 touchscreen"
 596         depends on ISA
 597         help
 598           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 599           Clio / Shangrila and want to support the built-in touchscreen.
 600
 601           If unsure, say N.
 602
 603           To compile this driver as a module, choose M here: the
 604           module will be called htcpen.
 605
 606 config TOUCHSCREEN_PENMOUNT
 607         tristate "Penmount serial touchscreen"
 608         select SERIO
 609         help
 610           Say Y here if you have a Penmount serial touchscreen connected to
 611           your system.
 612
 613           If unsure, say N.
 614
 615           To compile this driver as a module, choose M here: the
 616           module will be called penmount.
 617
 618 config TOUCHSCREEN_EDT_FT5X06
 619         tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 620         depends on I2C
 621         help
 622           Say Y here if you have an EDT "Polytouch" touchscreen based
 623           on the FocalTech FT5x06 family of controllers connected to
 624           your system.
 625
 626           If unsure, say N.
 627
 628           To compile this driver as a module, choose M here: the
 629           module will be called edt-ft5x06.
 630
 631 config TOUCHSCREEN_MIGOR
 632         tristate "Renesas MIGO-R touchscreen"
 633         depends on (SH_MIGOR || COMPILE_TEST) && I2C
 634         help
 635           Say Y here to enable MIGO-R touchscreen support.
 636
 637           If unsure, say N.
 638
 639           To compile this driver as a module, choose M here: the
 640           module will be called migor_ts.
 641
 642 config TOUCHSCREEN_TOUCHRIGHT
 643         tristate "Touchright serial touchscreen"
 644         select SERIO
 645         help
 646           Say Y here if you have a Touchright serial touchscreen connected to
 647           your system.
 648
 649           If unsure, say N.
 650
 651           To compile this driver as a module, choose M here: the
 652           module will be called touchright.
 653
 654 config TOUCHSCREEN_TOUCHWIN
 655         tristate "Touchwin serial touchscreen"
 656         select SERIO
 657         help
 658           Say Y here if you have a Touchwin serial touchscreen connected to
 659           your system.
 660
 661           If unsure, say N.
 662
 663           To compile this driver as a module, choose M here: the
 664           module will be called touchwin.
 665
 666 config TOUCHSCREEN_TI_AM335X_TSC
 667         tristate "TI Touchscreen Interface"
 668         depends on MFD_TI_AM335X_TSCADC
 669         help
 670           Say Y here if you have 4/5/8 wire touchscreen controller
 671           to be connected to the ADC controller on your TI AM335x SoC.
 672
 673           If unsure, say N.
 674
 675           To compile this driver as a module, choose M here: the
 676           module will be called ti_am335x_tsc.
 677
 678 config TOUCHSCREEN_UCB1400
 679         tristate "Philips UCB1400 touchscreen"
 680         depends on AC97_BUS
 681         depends on UCB1400_CORE
 682         help
 683           This enables support for the Philips UCB1400 touchscreen interface.
 684           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 685           will be initialized only after the ALSA subsystem has been
 686           brought up and the UCB1400 detected.  You therefore have to
 687           configure ALSA support as well (either built-in or modular,
 688           independently of whether this driver is itself built-in or
 689           modular) for this driver to work.
 690
 691           To compile this driver as a module, choose M here: the
 692           module will be called ucb1400_ts.
 693
 694 config TOUCHSCREEN_PIXCIR
 695         tristate "PIXCIR I2C touchscreens"
 696         depends on I2C
 697         help
 698           Say Y here if you have a pixcir i2c touchscreen
 699           controller.
 700
 701           If unsure, say N.
 702
 703           To compile this driver as a module, choose M here: the
 704           module will be called pixcir_i2c_ts.
 705
 706 config TOUCHSCREEN_WDT87XX_I2C
 707         tristate "Weida HiTech I2C touchscreen"
 708         depends on I2C
 709         help
 710           Say Y here if you have a Weida WDT87XX I2C touchscreen
 711           connected to your system.
 712
 713           If unsure, say N.
 714
 715           To compile this driver as a module, choose M here: the
 716           module will be called wdt87xx_i2c.
 717
 718 config TOUCHSCREEN_WM831X
 719         tristate "Support for WM831x touchscreen controllers"
 720         depends on MFD_WM831X
 721         help
 722           This enables support for the touchscreen controller on the WM831x
 723           series of PMICs.
 724
 725           To compile this driver as a module, choose M here: the
 726           module will be called wm831x-ts.
 727
 728 config TOUCHSCREEN_WM97XX
 729         tristate "Support for WM97xx AC97 touchscreen controllers"
 730         depends on AC97_BUS
 731         help
 732           Say Y here if you have a Wolfson Microelectronics WM97xx
 733           touchscreen connected to your system. Note that this option
 734           only enables core driver, you will also need to select
 735           support for appropriate chip below.
 736
 737           If unsure, say N.
 738
 739           To compile this driver as a module, choose M here: the
 740           module will be called wm97xx-ts.
 741
 742 config TOUCHSCREEN_WM9705
 743         bool "WM9705 Touchscreen interface support"
 744         depends on TOUCHSCREEN_WM97XX
 745         default y
 746         help
 747           Say Y here to enable support for the Wolfson Microelectronics
 748           WM9705 touchscreen controller.
 749
 750 config TOUCHSCREEN_WM9712
 751         bool "WM9712 Touchscreen interface support"
 752         depends on TOUCHSCREEN_WM97XX
 753         default y
 754         help
 755           Say Y here to enable support for the Wolfson Microelectronics
 756           WM9712 touchscreen controller.
 757
 758 config TOUCHSCREEN_WM9713
 759         bool "WM9713 Touchscreen interface support"
 760         depends on TOUCHSCREEN_WM97XX
 761         default y
 762         help
 763           Say Y here to enable support for the Wolfson Microelectronics
 764           WM9713 touchscreen controller.
 765
 766 config TOUCHSCREEN_WM97XX_ATMEL
 767         tristate "WM97xx Atmel accelerated touch"
 768         depends on TOUCHSCREEN_WM97XX && AVR32
 769         help
 770           Say Y here for support for streaming mode with WM97xx touchscreens
 771           on Atmel AT91 or AVR32 systems with an AC97C module.
 772
 773           Be aware that this will use channel B in the controller for
 774           streaming data, this must not conflict with other AC97C drivers.
 775
 776           If unsure, say N.
 777
 778           To compile this driver as a module, choose M here: the module will
 779           be called atmel-wm97xx.
 780
 781 config TOUCHSCREEN_WM97XX_MAINSTONE
 782         tristate "WM97xx Mainstone/Palm accelerated touch"
 783         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 784         help
 785           Say Y here for support for streaming mode with WM97xx touchscreens
 786           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 787
 788           If unsure, say N.
 789
 790           To compile this driver as a module, choose M here: the
 791           module will be called mainstone-wm97xx.
 792
 793 config TOUCHSCREEN_WM97XX_ZYLONITE
 794         tristate "Zylonite accelerated touch"
 795         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 796         select TOUCHSCREEN_WM9713
 797         help
 798           Say Y here for support for streaming mode with the touchscreen
 799           on Zylonite systems.
 800
 801           If unsure, say N.
 802
 803           To compile this driver as a module, choose M here: the
 804           module will be called zylonite-wm97xx.
 805
 806 config TOUCHSCREEN_USB_COMPOSITE
 807         tristate "USB Touchscreen Driver"
 808         depends on USB_ARCH_HAS_HCD
 809         select USB
 810         help
 811           USB Touchscreen driver for:
 812           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 813           - PanJit TouchSet USB
 814           - 3M MicroTouch USB (EX II series)
 815           - ITM
 816           - some other eTurboTouch
 817           - Gunze AHL61
 818           - DMC TSC-10/25
 819           - IRTOUCHSYSTEMS/UNITOP
 820           - IdealTEK URTC1000
 821           - GoTop Super_Q2/GogoPen/PenPower tablets
 822           - JASTEC USB Touch Controller/DigiTech DTR-02U
 823           - Zytronic controllers
 824           - Elo TouchSystems 2700 IntelliTouch
 825           - EasyTouch USB Touch Controller from Data Modul
 826           - e2i (Mimo monitors)
 827
 828           Have a look at <http://linux.chapter7.ch/touchkit/> for
 829           a usage description and the required user-space stuff.
 830
 831           To compile this driver as a module, choose M here: the
 832           module will be called usbtouchscreen.
 833
 834 config TOUCHSCREEN_MX25
 835         tristate "Freescale i.MX25 touchscreen input driver"
 836         depends on MFD_MX25_TSADC
 837         help
 838           Enable support for touchscreen connected to your i.MX25.
 839
 840           To compile this driver as a module, choose M here: the
 841           module will be called fsl-imx25-tcq.
 842
 843 config TOUCHSCREEN_MC13783
 844         tristate "Freescale MC13783 touchscreen input driver"
 845         depends on MFD_MC13XXX
 846         help
 847           Say Y here if you have an Freescale MC13783 PMIC on your
 848           board and want to use its touchscreen
 849
 850           If unsure, say N.
 851
 852           To compile this driver as a module, choose M here: the
 853           module will be called mc13783_ts.
 854
 855 config TOUCHSCREEN_USB_EGALAX
 856         default y
 857         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 858         depends on TOUCHSCREEN_USB_COMPOSITE
 859
 860 config TOUCHSCREEN_USB_PANJIT
 861         default y
 862         bool "PanJit device support" if EXPERT
 863         depends on TOUCHSCREEN_USB_COMPOSITE
 864
 865 config TOUCHSCREEN_USB_3M
 866         default y
 867         bool "3M/Microtouch EX II series device support" if EXPERT
 868         depends on TOUCHSCREEN_USB_COMPOSITE
 869
 870 config TOUCHSCREEN_USB_ITM
 871         default y
 872         bool "ITM device support" if EXPERT
 873         depends on TOUCHSCREEN_USB_COMPOSITE
 874
 875 config TOUCHSCREEN_USB_ETURBO
 876         default y
 877         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 878         depends on TOUCHSCREEN_USB_COMPOSITE
 879
 880 config TOUCHSCREEN_USB_GUNZE
 881         default y
 882         bool "Gunze AHL61 device support" if EXPERT
 883         depends on TOUCHSCREEN_USB_COMPOSITE
 884
 885 config TOUCHSCREEN_USB_DMC_TSC10
 886         default y
 887         bool "DMC TSC-10/25 device support" if EXPERT
 888         depends on TOUCHSCREEN_USB_COMPOSITE
 889
 890 config TOUCHSCREEN_USB_IRTOUCH
 891         default y
 892         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 893         depends on TOUCHSCREEN_USB_COMPOSITE
 894
 895 config TOUCHSCREEN_USB_IDEALTEK
 896         default y
 897         bool "IdealTEK URTC1000 device support" if EXPERT
 898         depends on TOUCHSCREEN_USB_COMPOSITE
 899
 900 config TOUCHSCREEN_USB_GENERAL_TOUCH
 901         default y
 902         bool "GeneralTouch Touchscreen device support" if EXPERT
 903         depends on TOUCHSCREEN_USB_COMPOSITE
 904
 905 config TOUCHSCREEN_USB_GOTOP
 906         default y
 907         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 908         depends on TOUCHSCREEN_USB_COMPOSITE
 909
 910 config TOUCHSCREEN_USB_JASTEC
 911         default y
 912         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 913         depends on TOUCHSCREEN_USB_COMPOSITE
 914
 915 config TOUCHSCREEN_USB_ELO
 916         default y
 917         bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 918         depends on TOUCHSCREEN_USB_COMPOSITE
 919
 920 config TOUCHSCREEN_USB_E2I
 921         default y
 922         bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 923         depends on TOUCHSCREEN_USB_COMPOSITE
 924
 925 config TOUCHSCREEN_USB_ZYTRONIC
 926         default y
 927         bool "Zytronic controller" if EXPERT
 928         depends on TOUCHSCREEN_USB_COMPOSITE
 929
 930 config TOUCHSCREEN_USB_ETT_TC45USB
 931         default y
 932         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 933         depends on TOUCHSCREEN_USB_COMPOSITE
 934
 935 config TOUCHSCREEN_USB_NEXIO
 936         default y
 937         bool "NEXIO/iNexio device support" if EXPERT
 938         depends on TOUCHSCREEN_USB_COMPOSITE
 939
 940 config TOUCHSCREEN_USB_EASYTOUCH
 941         default y
 942         bool "EasyTouch USB Touch controller device support" if EMBEDDED
 943         depends on TOUCHSCREEN_USB_COMPOSITE
 944         help
 945           Say Y here if you have an EasyTouch USB Touch controller.
 946           If unsure, say N.
 947
 948 config TOUCHSCREEN_TOUCHIT213
 949         tristate "Sahara TouchIT-213 touchscreen"
 950         select SERIO
 951         help
 952           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 953
 954           If unsure, say N.
 955
 956           To compile this driver as a module, choose M here: the
 957           module will be called touchit213.
 958
 959 config TOUCHSCREEN_TS4800
 960         tristate "TS-4800 touchscreen"
 961         depends on HAS_IOMEM && OF
 962         depends on SOC_IMX51 || COMPILE_TEST
 963         select MFD_SYSCON
 964         select INPUT_POLLDEV
 965         help
 966           Say Y here if you have a touchscreen on a TS-4800 board.
 967
 968           On TS-4800, the touchscreen is not handled directly by Linux but by
 969           a companion FPGA.
 970
 971           If unsure, say N.
 972
 973           To compile this driver as a module, choose M here: the
 974           module will be called ts4800_ts.
 975
 976 config TOUCHSCREEN_TSC_SERIO
 977         tristate "TSC-10/25/40 serial touchscreen support"
 978         select SERIO
 979         help
 980           Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 981           to your system.
 982
 983           If unsure, say N.
 984
 985           To compile this driver as a module, choose M here: the
 986           module will be called tsc40.
 987
 988 config TOUCHSCREEN_TSC200X_CORE
 989         tristate
 990
 991 config TOUCHSCREEN_TSC2004
 992         tristate "TSC2004 based touchscreens"
 993         depends on I2C
 994         select REGMAP_I2C
 995         select TOUCHSCREEN_TSC200X_CORE
 996         help
 997           Say Y here if you have a TSC2004 based touchscreen.
 998
 999           If unsure, say N.
1000
1001           To compile this driver as a module, choose M here: the
1002           module will be called tsc2004.
1003
1004 config TOUCHSCREEN_TSC2005
1005         tristate "TSC2005 based touchscreens"
1006         depends on SPI_MASTER
1007         select REGMAP_SPI
1008         select TOUCHSCREEN_TSC200X_CORE
1009         help
1010           Say Y here if you have a TSC2005 based touchscreen.
1011
1012           If unsure, say N.
1013
1014           To compile this driver as a module, choose M here: the
1015           module will be called tsc2005.
1016
1017 config TOUCHSCREEN_TSC2007
1018         tristate "TSC2007 based touchscreens"
1019         depends on I2C
1020         help
1021           Say Y here if you have a TSC2007 based touchscreen.
1022
1023           If unsure, say N.
1024
1025           To compile this driver as a module, choose M here: the
1026           module will be called tsc2007.
1027
1028 config TOUCHSCREEN_TSC2007_IIO
1029         bool "IIO interface for external ADC input and temperature"
1030         depends on TOUCHSCREEN_TSC2007
1031         depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1032         help
1033           Saying Y here adds an iio interface to the tsc2007 which
1034           provides values for the AUX input (used for e.g. battery
1035           or ambient light monitoring), temperature and raw input
1036           values.
1037
1038 config TOUCHSCREEN_W90X900
1039         tristate "W90P910 touchscreen driver"
1040         depends on ARCH_W90X900
1041         help
1042           Say Y here if you have a W90P910 based touchscreen.
1043
1044           To compile this driver as a module, choose M here: the
1045           module will be called w90p910_ts.
1046
1047 config TOUCHSCREEN_PCAP
1048         tristate "Motorola PCAP touchscreen"
1049         depends on EZX_PCAP
1050         help
1051           Say Y here if you have a Motorola EZX telephone and
1052           want to enable support for the built-in touchscreen.
1053
1054           To compile this driver as a module, choose M here: the
1055           module will be called pcap_ts.
1056
1057 config TOUCHSCREEN_RM_TS
1058         tristate "Raydium I2C Touchscreen"
1059         depends on I2C
1060         depends on GPIOLIB || COMPILE_TEST
1061         help
1062           Say Y here if you have Raydium series I2C touchscreen,
1063           such as RM32380, connected to your system.
1064
1065           If unsure, say N.
1066
1067           To compile this driver as a module, choose M here: the
1068           module will be called raydium_i2c_ts.
1069
1070 config TOUCHSCREEN_SILEAD
1071         tristate "Silead I2C touchscreen"
1072         depends on I2C
1073         help
1074           Say Y here if you have the Silead touchscreen connected to
1075           your system.
1076
1077           If unsure, say N.
1078
1079           To compile this driver as a module, choose M here: the
1080           module will be called silead.
1081
1082 config TOUCHSCREEN_SIS_I2C
1083         tristate "SiS 9200 family I2C touchscreen"
1084         depends on I2C
1085         select CRC_ITU_T
1086         depends on GPIOLIB || COMPILE_TEST
1087         help
1088           This enables support for SiS 9200 family over I2C based touchscreens.
1089
1090           If unsure, say N.
1091
1092           To compile this driver as a module, choose M here: the
1093           module will be called sis_i2c.
1094
1095 config TOUCHSCREEN_ST1232
1096         tristate "Sitronix ST1232 touchscreen controllers"
1097         depends on I2C
1098         help
1099           Say Y here if you want to support Sitronix ST1232
1100           touchscreen controller.
1101
1102           If unsure, say N.
1103
1104           To compile this driver as a module, choose M here: the
1105           module will be called st1232_ts.
1106
1107 config TOUCHSCREEN_STMPE
1108         tristate "STMicroelectronics STMPE touchscreens"
1109         depends on MFD_STMPE
1110         depends on (OF || COMPILE_TEST)
1111         help
1112           Say Y here if you want support for STMicroelectronics
1113           STMPE touchscreen controllers.
1114
1115           To compile this driver as a module, choose M here: the
1116           module will be called stmpe-ts.
1117
1118 config TOUCHSCREEN_SUN4I
1119         tristate "Allwinner sun4i resistive touchscreen controller support"
1120         depends on ARCH_SUNXI || COMPILE_TEST
1121         depends on HWMON
1122         depends on THERMAL || !THERMAL_OF
1123         help
1124           This selects support for the resistive touchscreen controller
1125           found on Allwinner sunxi SoCs.
1126
1127           To compile this driver as a module, choose M here: the
1128           module will be called sun4i-ts.
1129
1130 config TOUCHSCREEN_SUR40
1131         tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1132         depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1133         depends on VIDEO_V4L2
1134         select INPUT_POLLDEV
1135         select VIDEOBUF2_DMA_SG
1136         help
1137           Say Y here if you want support for the Samsung SUR40 touchscreen
1138           (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1139
1140           To compile this driver as a module, choose M here: the
1141           module will be called sur40.
1142
1143 config TOUCHSCREEN_SURFACE3_SPI
1144         tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1145         depends on SPI
1146         depends on GPIOLIB || COMPILE_TEST
1147         help
1148           Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1149           controller chip as found on the Surface 3 in your system.
1150
1151           If unsure, say N.
1152
1153           To compile this driver as a module, choose M here: the
1154           module will be called surface3_spi.
1155
1156 config TOUCHSCREEN_SX8654
1157         tristate "Semtech SX8654 touchscreen"
1158         depends on I2C
1159         help
1160           Say Y here if you have a Semtech SX8654 touchscreen controller.
1161
1162           If unsure, say N
1163
1164           To compile this driver as a module, choose M here: the
1165           module will be called sx8654.
1166
1167 config TOUCHSCREEN_TPS6507X
1168         tristate "TPS6507x based touchscreens"
1169         depends on I2C
1170         select INPUT_POLLDEV
1171         help
1172           Say Y here if you have a TPS6507x based touchscreen
1173           controller.
1174
1175           If unsure, say N.
1176
1177           To compile this driver as a module, choose M here: the
1178           module will be called tps6507x_ts.
1179
1180 config TOUCHSCREEN_ZET6223
1181         tristate "Zeitec ZET6223 touchscreen driver"
1182         depends on I2C
1183         help
1184           Say Y here if you have a touchscreen using Zeitec ZET6223
1185
1186           If unsure, say N.
1187
1188           To compile this driver as a module, choose M here: the
1189           module will be called zet6223.
1190
1191 config TOUCHSCREEN_ZFORCE
1192         tristate "Neonode zForce infrared touchscreens"
1193         depends on I2C
1194         depends on GPIOLIB || COMPILE_TEST
1195         help
1196           Say Y here if you have a touchscreen using the zforce
1197           infraread technology from Neonode.
1198
1199           If unsure, say N.
1200
1201           To compile this driver as a module, choose M here: the
1202           module will be called zforce_ts.
1203
1204 config TOUCHSCREEN_COLIBRI_VF50
1205         tristate "Toradex Colibri on board touchscreen driver"
1206         depends on IIO && VF610_ADC
1207         depends on GPIOLIB || COMPILE_TEST
1208         help
1209           Say Y here if you have a Colibri VF50 and plan to use
1210           the on-board provided 4-wire touchscreen driver.
1211
1212           If unsure, say N.
1213
1214           To compile this driver as a module, choose M here: the
1215           module will be called colibri_vf50_ts.
1216
1217 config TOUCHSCREEN_ROHM_BU21023
1218         tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1219         depends on I2C
1220         help
1221           Say Y here if you have a touchscreen using ROHM BU21023/24.
1222
1223           If unsure, say N.
1224
1225           To compile this driver as a module, choose M here: the
1226           module will be called bu21023_ts.
1227
1228 endif