drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config OF_TOUCHSCREEN
  15         def_tristate INPUT
  16         depends on INPUT && OF
  17
  18 config TOUCHSCREEN_88PM860X
  19         tristate "Marvell 88PM860x touchscreen"
  20         depends on MFD_88PM860X
  21         help
  22           Say Y here if you have a 88PM860x PMIC and want to enable
  23           support for the built-in touchscreen.
  24
  25           If unsure, say N.
  26
  27           To compile this driver as a module, choose M here: the
  28           module will be called 88pm860x-ts.
  29
  30 config TOUCHSCREEN_ADS7846
  31         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  32         depends on SPI_MASTER
  33         depends on HWMON = n || HWMON
  34         help
  35           Say Y here if you have a touchscreen interface using the
  36           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  37           and your board-specific setup code includes that in its
  38           table of SPI devices.
  39
  40           If HWMON is selected, and the driver is told the reference voltage
  41           on your board, you will also get hwmon interfaces for the voltage
  42           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  43
  44           If unsure, say N (but it's safe to say "Y").
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called ads7846.
  48
  49 config TOUCHSCREEN_AD7877
  50         tristate "AD7877 based touchscreens"
  51         depends on SPI_MASTER
  52         help
  53           Say Y here if you have a touchscreen interface using the
  54           AD7877 controller, and your board-specific initialization
  55           code includes that in its table of SPI devices.
  56
  57           If unsure, say N (but it's safe to say "Y").
  58
  59           To compile this driver as a module, choose M here: the
  60           module will be called ad7877.
  61
  62 config TOUCHSCREEN_AD7879
  63         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  64         help
  65           Say Y here if you want to support a touchscreen interface using
  66           the AD7879-1/AD7889-1 controller.
  67
  68           You should select a bus connection too.
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ad7879.
  72
  73 config TOUCHSCREEN_AD7879_I2C
  74         tristate "support I2C bus connection"
  75         depends on TOUCHSCREEN_AD7879 && I2C
  76         help
  77           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called ad7879-i2c.
  81
  82 config TOUCHSCREEN_AD7879_SPI
  83         tristate "support SPI bus connection"
  84         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  85         help
  86           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  87
  88           If unsure, say N (but it's safe to say "Y").
  89
  90           To compile this driver as a module, choose M here: the
  91           module will be called ad7879-spi.
  92
  93 config TOUCHSCREEN_AR1021_I2C
  94         tristate "Microchip AR1021 i2c touchscreen"
  95         depends on I2C && OF
  96         help
  97           Say Y here if you have the Microchip AR1021 touchscreen controller
  98           chip in your system.
  99
 100           If unsure, say N.
 101
 102           To compile this driver as a module, choose M here: the
 103           module will be called ar1021_i2c.
 104
 105 config TOUCHSCREEN_ATMEL_MXT
 106         tristate "Atmel mXT I2C Touchscreen"
 107         depends on I2C
 108         select FW_LOADER
 109         help
 110           Say Y here if you have Atmel mXT series I2C touchscreen,
 111           such as AT42QT602240/ATMXT224, connected to your system.
 112
 113           If unsure, say N.
 114
 115           To compile this driver as a module, choose M here: the
 116           module will be called atmel_mxt_ts.
 117
 118 config TOUCHSCREEN_AUO_PIXCIR
 119         tristate "AUO in-cell touchscreen using Pixcir ICs"
 120         depends on I2C
 121         depends on GPIOLIB
 122         help
 123           Say Y here if you have a AUO display with in-cell touchscreen
 124           using Pixcir ICs.
 125
 126           If unsure, say N.
 127
 128           To compile this driver as a module, choose M here: the
 129           module will be called auo-pixcir-ts.
 130
 131 config TOUCHSCREEN_BU21013
 132         tristate "BU21013 based touch panel controllers"
 133         depends on I2C
 134         help
 135           Say Y here if you have a bu21013 touchscreen connected to
 136           your system.
 137
 138           If unsure, say N.
 139
 140           To compile this driver as a module, choose M here: the
 141           module will be called bu21013_ts.
 142
 143 config TOUCHSCREEN_CHIPONE_ICN8318
 144         tristate "chipone icn8318 touchscreen controller"
 145         depends on GPIOLIB
 146         depends on I2C
 147         depends on OF
 148         help
 149           Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
 150
 151           If unsure, say N.
 152
 153           To compile this driver as a module, choose M here: the
 154           module will be called chipone_icn8318.
 155
 156 config TOUCHSCREEN_CY8CTMG110
 157         tristate "cy8ctmg110 touchscreen"
 158         depends on I2C
 159         depends on GPIOLIB
 160         help
 161           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 162           an AAVA device.
 163
 164           If unsure, say N.
 165
 166           To compile this driver as a module, choose M here: the
 167           module will be called cy8ctmg110_ts.
 168
 169 config TOUCHSCREEN_CYTTSP_CORE
 170         tristate "Cypress TTSP touchscreen"
 171         help
 172           Say Y here if you have a touchscreen using controller from
 173           the Cypress TrueTouch(tm) Standard Product family connected
 174           to your system. You will also need to select appropriate
 175           bus connection below.
 176
 177           If unsure, say N.
 178
 179           To compile this driver as a module, choose M here: the
 180           module will be called cyttsp_core.
 181
 182 config TOUCHSCREEN_CYTTSP_I2C
 183         tristate "support I2C bus connection"
 184         depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 185         help
 186           Say Y here if the touchscreen is connected via I2C bus.
 187
 188           To compile this driver as a module, choose M here: the
 189           module will be called cyttsp_i2c.
 190
 191 config TOUCHSCREEN_CYTTSP_SPI
 192         tristate "support SPI bus connection"
 193         depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 194         help
 195           Say Y here if the touchscreen is connected via SPI bus.
 196
 197           To compile this driver as a module, choose M here: the
 198           module will be called cyttsp_spi.
 199
 200 config TOUCHSCREEN_CYTTSP4_CORE
 201         tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 202         help
 203           Core driver for Cypress TrueTouch(tm) Standard Product
 204           Generation4 touchscreen controllers.
 205
 206           Say Y here if you have a Cypress Gen4 touchscreen.
 207
 208           If unsure, say N.
 209
 210           To compile this driver as a module, choose M here.
 211
 212 config TOUCHSCREEN_CYTTSP4_I2C
 213         tristate "support I2C bus connection"
 214         depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 215         help
 216           Say Y here if the touchscreen is connected via I2C bus.
 217
 218           To compile this driver as a module, choose M here: the
 219           module will be called cyttsp4_i2c.
 220
 221 config TOUCHSCREEN_CYTTSP4_SPI
 222         tristate "support SPI bus connection"
 223         depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 224         help
 225           Say Y here if the touchscreen is connected via SPI bus.
 226
 227           To compile this driver as a module, choose M here: the
 228           module will be called cyttsp4_spi.
 229
 230 config TOUCHSCREEN_DA9034
 231         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 232         depends on PMIC_DA903X
 233         default y
 234         help
 235           Say Y here to enable the support for the touchscreen found
 236           on Dialog Semiconductor DA9034 PMIC.
 237
 238           If unsure, say N.
 239
 240           To compile this driver as a module, choose M here: the
 241           module will be called da9034-ts.
 242
 243 config TOUCHSCREEN_DA9052
 244         tristate "Dialog DA9052/DA9053 TSI"
 245         depends on PMIC_DA9052
 246         help
 247           Say Y here to support the touchscreen found on Dialog Semiconductor
 248           DA9052-BC and DA9053-AA/Bx PMICs.
 249
 250           If unsure, say N.
 251
 252           To compile this driver as a module, choose M here: the
 253           module will be called da9052_tsi.
 254
 255 config TOUCHSCREEN_DYNAPRO
 256         tristate "Dynapro serial touchscreen"
 257         select SERIO
 258         help
 259           Say Y here if you have a Dynapro serial touchscreen connected to
 260           your system.
 261
 262           If unsure, say N.
 263
 264           To compile this driver as a module, choose M here: the
 265           module will be called dynapro.
 266
 267 config TOUCHSCREEN_HAMPSHIRE
 268         tristate "Hampshire serial touchscreen"
 269         select SERIO
 270         help
 271           Say Y here if you have a Hampshire serial touchscreen connected to
 272           your system.
 273
 274           If unsure, say N.
 275
 276           To compile this driver as a module, choose M here: the
 277           module will be called hampshire.
 278
 279 config TOUCHSCREEN_EETI
 280         tristate "EETI touchscreen panel support"
 281         depends on I2C
 282         help
 283           Say Y here to enable support for I2C connected EETI touch panels.
 284
 285           To compile this driver as a module, choose M here: the
 286           module will be called eeti_ts.
 287
 288 config TOUCHSCREEN_EGALAX
 289         tristate "EETI eGalax multi-touch panel support"
 290         depends on I2C && OF
 291         help
 292           Say Y here to enable support for I2C connected EETI
 293           eGalax multi-touch panels.
 294
 295           To compile this driver as a module, choose M here: the
 296           module will be called egalax_ts.
 297
 298 config TOUCHSCREEN_FUJITSU
 299         tristate "Fujitsu serial touchscreen"
 300         select SERIO
 301         help
 302           Say Y here if you have the Fujitsu touchscreen (such as one
 303           installed in Lifebook P series laptop) connected to your
 304           system.
 305
 306           If unsure, say N.
 307
 308           To compile this driver as a module, choose M here: the
 309           module will be called fujitsu-ts.
 310
 311 config TOUCHSCREEN_GOODIX
 312         tristate "Goodix I2C touchscreen"
 313         depends on I2C
 314         help
 315           Say Y here if you have the Goodix touchscreen (such as one
 316           installed in Onda v975w tablets) connected to your
 317           system. It also supports 5-finger chip models, which can be
 318           found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 319
 320           If unsure, say N.
 321
 322           To compile this driver as a module, choose M here: the
 323           module will be called goodix.
 324
 325 config TOUCHSCREEN_ILI210X
 326         tristate "Ilitek ILI210X based touchscreen"
 327         depends on I2C
 328         help
 329           Say Y here if you have a ILI210X based touchscreen
 330           controller. This driver supports models ILI2102,
 331           ILI2102s, ILI2103, ILI2103s and ILI2105.
 332           Such kind of chipsets can be found in Amazon Kindle Fire
 333           touchscreens.
 334
 335           If unsure, say N.
 336
 337           To compile this driver as a module, choose M here: the
 338           module will be called ili210x.
 339
 340 config TOUCHSCREEN_IPROC
 341         tristate "IPROC touch panel driver support"
 342         depends on ARCH_BCM_IPROC || COMPILE_TEST
 343         help
 344           Say Y here if you want to add support for the IPROC touch
 345           controller to your system.
 346
 347           If unsure, say N.
 348
 349           To compile this driver as a module, choose M here: the
 350           module will be called bcm_iproc_tsc.
 351
 352 config TOUCHSCREEN_S3C2410
 353         tristate "Samsung S3C2410/generic touchscreen input driver"
 354         depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 355         select S3C_ADC
 356         help
 357           Say Y here if you have the s3c2410 touchscreen.
 358
 359           If unsure, say N.
 360
 361           To compile this driver as a module, choose M here: the
 362           module will be called s3c2410_ts.
 363
 364 config TOUCHSCREEN_GUNZE
 365         tristate "Gunze AHL-51S touchscreen"
 366         select SERIO
 367         help
 368           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 369           your system.
 370
 371           If unsure, say N.
 372
 373           To compile this driver as a module, choose M here: the
 374           module will be called gunze.
 375
 376 config TOUCHSCREEN_ELAN
 377         tristate "Elan eKTH I2C touchscreen"
 378         depends on I2C
 379         help
 380           Say Y here if you have an Elan eKTH I2C touchscreen
 381           connected to your system.
 382
 383           If unsure, say N.
 384
 385           To compile this driver as a module, choose M here: the
 386           module will be called elants_i2c.
 387
 388 config TOUCHSCREEN_ELO
 389         tristate "Elo serial touchscreens"
 390         select SERIO
 391         help
 392           Say Y here if you have an Elo serial touchscreen connected to
 393           your system.
 394
 395           If unsure, say N.
 396
 397           To compile this driver as a module, choose M here: the
 398           module will be called elo.
 399
 400 config TOUCHSCREEN_WACOM_W8001
 401         tristate "Wacom W8001 penabled serial touchscreen"
 402         select SERIO
 403         help
 404           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 405           connected to your system.
 406
 407           If unsure, say N.
 408
 409           To compile this driver as a module, choose M here: the
 410           module will be called wacom_w8001.
 411
 412 config TOUCHSCREEN_WACOM_I2C
 413         tristate "Wacom Tablet support (I2C)"
 414         depends on I2C
 415         help
 416           Say Y here if you want to use the I2C version of the Wacom
 417           Pen Tablet.
 418
 419           If unsure, say N.
 420
 421           To compile this driver as a module, choose M here: the module
 422           will be called wacom_i2c.
 423
 424 config TOUCHSCREEN_LPC32XX
 425         tristate "LPC32XX touchscreen controller"
 426         depends on ARCH_LPC32XX
 427         help
 428           Say Y here if you have a LPC32XX device and want
 429           to support the built-in touchscreen.
 430
 431           To compile this driver as a module, choose M here: the
 432           module will be called lpc32xx_ts.
 433
 434 config TOUCHSCREEN_MAX11801
 435         tristate "MAX11801 based touchscreens"
 436         depends on I2C
 437         help
 438           Say Y here if you have a MAX11801 based touchscreen
 439           controller.
 440
 441           If unsure, say N.
 442
 443           To compile this driver as a module, choose M here: the
 444           module will be called max11801_ts.
 445
 446 config TOUCHSCREEN_MCS5000
 447         tristate "MELFAS MCS-5000 touchscreen"
 448         depends on I2C
 449         help
 450           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 451           chip in your system.
 452
 453           If unsure, say N.
 454
 455           To compile this driver as a module, choose M here: the
 456           module will be called mcs5000_ts.
 457
 458 config TOUCHSCREEN_MMS114
 459         tristate "MELFAS MMS114 touchscreen"
 460         depends on I2C
 461         help
 462           Say Y here if you have the MELFAS MMS114 touchscreen controller
 463           chip in your system.
 464
 465           If unsure, say N.
 466
 467           To compile this driver as a module, choose M here: the
 468           module will be called mms114.
 469
 470 config TOUCHSCREEN_MTOUCH
 471         tristate "MicroTouch serial touchscreens"
 472         select SERIO
 473         help
 474           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 475           your system.
 476
 477           If unsure, say N.
 478
 479           To compile this driver as a module, choose M here: the
 480           module will be called mtouch.
 481
 482 config TOUCHSCREEN_INEXIO
 483         tristate "iNexio serial touchscreens"
 484         select SERIO
 485         help
 486           Say Y here if you have an iNexio serial touchscreen connected to
 487           your system.
 488
 489           If unsure, say N.
 490
 491           To compile this driver as a module, choose M here: the
 492           module will be called inexio.
 493
 494 config TOUCHSCREEN_INTEL_MID
 495         tristate "Intel MID platform resistive touchscreen"
 496         depends on INTEL_SCU_IPC
 497         help
 498           Say Y here if you have a Intel MID based touchscreen in
 499           your system.
 500
 501           If unsure, say N.
 502
 503           To compile this driver as a module, choose M here: the
 504           module will be called intel_mid_touch.
 505
 506 config TOUCHSCREEN_MK712
 507         tristate "ICS MicroClock MK712 touchscreen"
 508         help
 509           Say Y here if you have the ICS MicroClock MK712 touchscreen
 510           controller chip in your system.
 511
 512           If unsure, say N.
 513
 514           To compile this driver as a module, choose M here: the
 515           module will be called mk712.
 516
 517 config TOUCHSCREEN_HP600
 518         tristate "HP Jornada 6xx touchscreen"
 519         depends on SH_HP6XX && SH_ADC
 520         help
 521           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 522           support the built-in touchscreen.
 523
 524           To compile this driver as a module, choose M here: the
 525           module will be called hp680_ts_input.
 526
 527 config TOUCHSCREEN_HP7XX
 528         tristate "HP Jornada 7xx touchscreen"
 529         depends on SA1100_JORNADA720_SSP
 530         help
 531           Say Y here if you have a HP Jornada 710/720/728 and want
 532           to support the built-in touchscreen.
 533
 534           To compile this driver as a module, choose M here: the
 535           module will be called jornada720_ts.
 536
 537 config TOUCHSCREEN_IPAQ_MICRO
 538         tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 539         depends on MFD_IPAQ_MICRO
 540         help
 541           Say Y here to enable support for the touchscreen attached to
 542           the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 543
 544           If unsure, say N.
 545
 546           To compile this driver as a module, choose M here: the
 547           module will be called ipaq-micro-ts.
 548
 549 config TOUCHSCREEN_HTCPEN
 550         tristate "HTC Shift X9500 touchscreen"
 551         depends on ISA
 552         help
 553           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 554           Clio / Shangrila and want to support the built-in touchscreen.
 555
 556           If unsure, say N.
 557
 558           To compile this driver as a module, choose M here: the
 559           module will be called htcpen.
 560
 561 config TOUCHSCREEN_PENMOUNT
 562         tristate "Penmount serial touchscreen"
 563         select SERIO
 564         help
 565           Say Y here if you have a Penmount serial touchscreen connected to
 566           your system.
 567
 568           If unsure, say N.
 569
 570           To compile this driver as a module, choose M here: the
 571           module will be called penmount.
 572
 573 config TOUCHSCREEN_EDT_FT5X06
 574         tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 575         depends on I2C
 576         help
 577           Say Y here if you have an EDT "Polytouch" touchscreen based
 578           on the FocalTech FT5x06 family of controllers connected to
 579           your system.
 580
 581           If unsure, say N.
 582
 583           To compile this driver as a module, choose M here: the
 584           module will be called edt-ft5x06.
 585
 586 config TOUCHSCREEN_MIGOR
 587         tristate "Renesas MIGO-R touchscreen"
 588         depends on SH_MIGOR && I2C
 589         help
 590           Say Y here to enable MIGO-R touchscreen support.
 591
 592           If unsure, say N.
 593
 594           To compile this driver as a module, choose M here: the
 595           module will be called migor_ts.
 596
 597 config TOUCHSCREEN_TOUCHRIGHT
 598         tristate "Touchright serial touchscreen"
 599         select SERIO
 600         help
 601           Say Y here if you have a Touchright serial touchscreen connected to
 602           your system.
 603
 604           If unsure, say N.
 605
 606           To compile this driver as a module, choose M here: the
 607           module will be called touchright.
 608
 609 config TOUCHSCREEN_TOUCHWIN
 610         tristate "Touchwin serial touchscreen"
 611         select SERIO
 612         help
 613           Say Y here if you have a Touchwin serial touchscreen connected to
 614           your system.
 615
 616           If unsure, say N.
 617
 618           To compile this driver as a module, choose M here: the
 619           module will be called touchwin.
 620
 621 config TOUCHSCREEN_TI_AM335X_TSC
 622         tristate "TI Touchscreen Interface"
 623         depends on MFD_TI_AM335X_TSCADC
 624         help
 625           Say Y here if you have 4/5/8 wire touchscreen controller
 626           to be connected to the ADC controller on your TI AM335x SoC.
 627
 628           If unsure, say N.
 629
 630           To compile this driver as a module, choose M here: the
 631           module will be called ti_am335x_tsc.
 632
 633 config TOUCHSCREEN_UCB1400
 634         tristate "Philips UCB1400 touchscreen"
 635         depends on AC97_BUS
 636         depends on UCB1400_CORE
 637         help
 638           This enables support for the Philips UCB1400 touchscreen interface.
 639           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 640           will be initialized only after the ALSA subsystem has been
 641           brought up and the UCB1400 detected.  You therefore have to
 642           configure ALSA support as well (either built-in or modular,
 643           independently of whether this driver is itself built-in or
 644           modular) for this driver to work.
 645
 646           To compile this driver as a module, choose M here: the
 647           module will be called ucb1400_ts.
 648
 649 config TOUCHSCREEN_PIXCIR
 650         tristate "PIXCIR I2C touchscreens"
 651         depends on I2C
 652         help
 653           Say Y here if you have a pixcir i2c touchscreen
 654           controller.
 655
 656           If unsure, say N.
 657
 658           To compile this driver as a module, choose M here: the
 659           module will be called pixcir_i2c_ts.
 660
 661 config TOUCHSCREEN_WDT87XX_I2C
 662         tristate "Weida HiTech I2C touchscreen"
 663         depends on I2C
 664         help
 665           Say Y here if you have a Weida WDT87XX I2C touchscreen
 666           connected to your system.
 667
 668           If unsure, say N.
 669
 670           To compile this driver as a module, choose M here: the
 671           module will be called wdt87xx_i2c.
 672
 673 config TOUCHSCREEN_WM831X
 674         tristate "Support for WM831x touchscreen controllers"
 675         depends on MFD_WM831X
 676         help
 677           This enables support for the touchscreen controller on the WM831x
 678           series of PMICs.
 679
 680           To compile this driver as a module, choose M here: the
 681           module will be called wm831x-ts.
 682
 683 config TOUCHSCREEN_WM97XX
 684         tristate "Support for WM97xx AC97 touchscreen controllers"
 685         depends on AC97_BUS
 686         help
 687           Say Y here if you have a Wolfson Microelectronics WM97xx
 688           touchscreen connected to your system. Note that this option
 689           only enables core driver, you will also need to select
 690           support for appropriate chip below.
 691
 692           If unsure, say N.
 693
 694           To compile this driver as a module, choose M here: the
 695           module will be called wm97xx-ts.
 696
 697 config TOUCHSCREEN_WM9705
 698         bool "WM9705 Touchscreen interface support"
 699         depends on TOUCHSCREEN_WM97XX
 700         default y
 701         help
 702           Say Y here to enable support for the Wolfson Microelectronics
 703           WM9705 touchscreen controller.
 704
 705 config TOUCHSCREEN_WM9712
 706         bool "WM9712 Touchscreen interface support"
 707         depends on TOUCHSCREEN_WM97XX
 708         default y
 709         help
 710           Say Y here to enable support for the Wolfson Microelectronics
 711           WM9712 touchscreen controller.
 712
 713 config TOUCHSCREEN_WM9713
 714         bool "WM9713 Touchscreen interface support"
 715         depends on TOUCHSCREEN_WM97XX
 716         default y
 717         help
 718           Say Y here to enable support for the Wolfson Microelectronics
 719           WM9713 touchscreen controller.
 720
 721 config TOUCHSCREEN_WM97XX_ATMEL
 722         tristate "WM97xx Atmel accelerated touch"
 723         depends on TOUCHSCREEN_WM97XX && AVR32
 724         help
 725           Say Y here for support for streaming mode with WM97xx touchscreens
 726           on Atmel AT91 or AVR32 systems with an AC97C module.
 727
 728           Be aware that this will use channel B in the controller for
 729           streaming data, this must not conflict with other AC97C drivers.
 730
 731           If unsure, say N.
 732
 733           To compile this driver as a module, choose M here: the module will
 734           be called atmel-wm97xx.
 735
 736 config TOUCHSCREEN_WM97XX_MAINSTONE
 737         tristate "WM97xx Mainstone/Palm accelerated touch"
 738         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 739         help
 740           Say Y here for support for streaming mode with WM97xx touchscreens
 741           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 742
 743           If unsure, say N.
 744
 745           To compile this driver as a module, choose M here: the
 746           module will be called mainstone-wm97xx.
 747
 748 config TOUCHSCREEN_WM97XX_ZYLONITE
 749         tristate "Zylonite accelerated touch"
 750         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 751         select TOUCHSCREEN_WM9713
 752         help
 753           Say Y here for support for streaming mode with the touchscreen
 754           on Zylonite systems.
 755
 756           If unsure, say N.
 757
 758           To compile this driver as a module, choose M here: the
 759           module will be called zylonite-wm97xx.
 760
 761 config TOUCHSCREEN_USB_COMPOSITE
 762         tristate "USB Touchscreen Driver"
 763         depends on USB_ARCH_HAS_HCD
 764         select USB
 765         help
 766           USB Touchscreen driver for:
 767           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 768           - PanJit TouchSet USB
 769           - 3M MicroTouch USB (EX II series)
 770           - ITM
 771           - some other eTurboTouch
 772           - Gunze AHL61
 773           - DMC TSC-10/25
 774           - IRTOUCHSYSTEMS/UNITOP
 775           - IdealTEK URTC1000
 776           - GoTop Super_Q2/GogoPen/PenPower tablets
 777           - JASTEC USB Touch Controller/DigiTech DTR-02U
 778           - Zytronic controllers
 779           - Elo TouchSystems 2700 IntelliTouch
 780           - EasyTouch USB Touch Controller from Data Modul
 781           - e2i (Mimo monitors)
 782
 783           Have a look at <http://linux.chapter7.ch/touchkit/> for
 784           a usage description and the required user-space stuff.
 785
 786           To compile this driver as a module, choose M here: the
 787           module will be called usbtouchscreen.
 788
 789 config TOUCHSCREEN_MC13783
 790         tristate "Freescale MC13783 touchscreen input driver"
 791         depends on MFD_MC13XXX
 792         help
 793           Say Y here if you have an Freescale MC13783 PMIC on your
 794           board and want to use its touchscreen
 795
 796           If unsure, say N.
 797
 798           To compile this driver as a module, choose M here: the
 799           module will be called mc13783_ts.
 800
 801 config TOUCHSCREEN_USB_EGALAX
 802         default y
 803         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 804         depends on TOUCHSCREEN_USB_COMPOSITE
 805
 806 config TOUCHSCREEN_USB_PANJIT
 807         default y
 808         bool "PanJit device support" if EXPERT
 809         depends on TOUCHSCREEN_USB_COMPOSITE
 810
 811 config TOUCHSCREEN_USB_3M
 812         default y
 813         bool "3M/Microtouch EX II series device support" if EXPERT
 814         depends on TOUCHSCREEN_USB_COMPOSITE
 815
 816 config TOUCHSCREEN_USB_ITM
 817         default y
 818         bool "ITM device support" if EXPERT
 819         depends on TOUCHSCREEN_USB_COMPOSITE
 820
 821 config TOUCHSCREEN_USB_ETURBO
 822         default y
 823         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 824         depends on TOUCHSCREEN_USB_COMPOSITE
 825
 826 config TOUCHSCREEN_USB_GUNZE
 827         default y
 828         bool "Gunze AHL61 device support" if EXPERT
 829         depends on TOUCHSCREEN_USB_COMPOSITE
 830
 831 config TOUCHSCREEN_USB_DMC_TSC10
 832         default y
 833         bool "DMC TSC-10/25 device support" if EXPERT
 834         depends on TOUCHSCREEN_USB_COMPOSITE
 835
 836 config TOUCHSCREEN_USB_IRTOUCH
 837         default y
 838         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 839         depends on TOUCHSCREEN_USB_COMPOSITE
 840
 841 config TOUCHSCREEN_USB_IDEALTEK
 842         default y
 843         bool "IdealTEK URTC1000 device support" if EXPERT
 844         depends on TOUCHSCREEN_USB_COMPOSITE
 845
 846 config TOUCHSCREEN_USB_GENERAL_TOUCH
 847         default y
 848         bool "GeneralTouch Touchscreen device support" if EXPERT
 849         depends on TOUCHSCREEN_USB_COMPOSITE
 850
 851 config TOUCHSCREEN_USB_GOTOP
 852         default y
 853         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 854         depends on TOUCHSCREEN_USB_COMPOSITE
 855
 856 config TOUCHSCREEN_USB_JASTEC
 857         default y
 858         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 859         depends on TOUCHSCREEN_USB_COMPOSITE
 860
 861 config TOUCHSCREEN_USB_ELO
 862         default y
 863         bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 864         depends on TOUCHSCREEN_USB_COMPOSITE
 865
 866 config TOUCHSCREEN_USB_E2I
 867         default y
 868         bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 869         depends on TOUCHSCREEN_USB_COMPOSITE
 870
 871 config TOUCHSCREEN_USB_ZYTRONIC
 872         default y
 873         bool "Zytronic controller" if EXPERT
 874         depends on TOUCHSCREEN_USB_COMPOSITE
 875
 876 config TOUCHSCREEN_USB_ETT_TC45USB
 877         default y
 878         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 879         depends on TOUCHSCREEN_USB_COMPOSITE
 880
 881 config TOUCHSCREEN_USB_NEXIO
 882         default y
 883         bool "NEXIO/iNexio device support" if EXPERT
 884         depends on TOUCHSCREEN_USB_COMPOSITE
 885
 886 config TOUCHSCREEN_USB_EASYTOUCH
 887         default y
 888         bool "EasyTouch USB Touch controller device support" if EMBEDDED
 889         depends on TOUCHSCREEN_USB_COMPOSITE
 890         help
 891           Say Y here if you have an EasyTouch USB Touch controller.
 892           If unsure, say N.
 893
 894 config TOUCHSCREEN_TOUCHIT213
 895         tristate "Sahara TouchIT-213 touchscreen"
 896         select SERIO
 897         help
 898           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 899
 900           If unsure, say N.
 901
 902           To compile this driver as a module, choose M here: the
 903           module will be called touchit213.
 904
 905 config TOUCHSCREEN_TSC_SERIO
 906         tristate "TSC-10/25/40 serial touchscreen support"
 907         select SERIO
 908         help
 909           Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 910           to your system.
 911
 912           If unsure, say N.
 913
 914           To compile this driver as a module, choose M here: the
 915           module will be called tsc40.
 916
 917 config TOUCHSCREEN_TSC2005
 918         tristate "TSC2005 based touchscreens"
 919         depends on SPI_MASTER
 920         help
 921           Say Y here if you have a TSC2005 based touchscreen.
 922
 923           If unsure, say N.
 924
 925           To compile this driver as a module, choose M here: the
 926           module will be called tsc2005.
 927
 928 config TOUCHSCREEN_TSC2007
 929         tristate "TSC2007 based touchscreens"
 930         depends on I2C
 931         help
 932           Say Y here if you have a TSC2007 based touchscreen.
 933
 934           If unsure, say N.
 935
 936           To compile this driver as a module, choose M here: the
 937           module will be called tsc2007.
 938
 939 config TOUCHSCREEN_W90X900
 940         tristate "W90P910 touchscreen driver"
 941         depends on ARCH_W90X900
 942         help
 943           Say Y here if you have a W90P910 based touchscreen.
 944
 945           To compile this driver as a module, choose M here: the
 946           module will be called w90p910_ts.
 947
 948 config TOUCHSCREEN_PCAP
 949         tristate "Motorola PCAP touchscreen"
 950         depends on EZX_PCAP
 951         help
 952           Say Y here if you have a Motorola EZX telephone and
 953           want to enable support for the built-in touchscreen.
 954
 955           To compile this driver as a module, choose M here: the
 956           module will be called pcap_ts.
 957
 958 config TOUCHSCREEN_ST1232
 959         tristate "Sitronix ST1232 touchscreen controllers"
 960         depends on I2C
 961         help
 962           Say Y here if you want to support Sitronix ST1232
 963           touchscreen controller.
 964
 965           If unsure, say N.
 966
 967           To compile this driver as a module, choose M here: the
 968           module will be called st1232_ts.
 969
 970 config TOUCHSCREEN_STMPE
 971         tristate "STMicroelectronics STMPE touchscreens"
 972         depends on MFD_STMPE
 973         depends on (OF || COMPILE_TEST)
 974         help
 975           Say Y here if you want support for STMicroelectronics
 976           STMPE touchscreen controllers.
 977
 978           To compile this driver as a module, choose M here: the
 979           module will be called stmpe-ts.
 980
 981 config TOUCHSCREEN_SUN4I
 982         tristate "Allwinner sun4i resistive touchscreen controller support"
 983         depends on ARCH_SUNXI || COMPILE_TEST
 984         depends on HWMON
 985         depends on THERMAL || !THERMAL_OF
 986         help
 987           This selects support for the resistive touchscreen controller
 988           found on Allwinner sunxi SoCs.
 989
 990           To compile this driver as a module, choose M here: the
 991           module will be called sun4i-ts.
 992
 993 config TOUCHSCREEN_SUR40
 994         tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
 995         depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
 996         select INPUT_POLLDEV
 997         select VIDEOBUF2_DMA_SG
 998         help
 999           Say Y here if you want support for the Samsung SUR40 touchscreen
1000           (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1001
1002           To compile this driver as a module, choose M here: the
1003           module will be called sur40.
1004
1005 config TOUCHSCREEN_SX8654
1006         tristate "Semtech SX8654 touchscreen"
1007         depends on I2C
1008         help
1009           Say Y here if you have a Semtech SX8654 touchscreen controller.
1010
1011           If unsure, say N
1012
1013           To compile this driver as a module, choose M here: the
1014           module will be called sx8654.
1015
1016 config TOUCHSCREEN_TPS6507X
1017         tristate "TPS6507x based touchscreens"
1018         depends on I2C
1019         select INPUT_POLLDEV
1020         help
1021           Say Y here if you have a TPS6507x based touchscreen
1022           controller.
1023
1024           If unsure, say N.
1025
1026           To compile this driver as a module, choose M here: the
1027           module will be called tps6507x_ts.
1028
1029 config TOUCHSCREEN_ZFORCE
1030         tristate "Neonode zForce infrared touchscreens"
1031         depends on I2C
1032         depends on GPIOLIB
1033         help
1034           Say Y here if you have a touchscreen using the zforce
1035           infraread technology from Neonode.
1036
1037           If unsure, say N.
1038
1039           To compile this driver as a module, choose M here: the
1040           module will be called zforce_ts.
1041
1042 endif