drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_88PM860X
  15         tristate "Marvell 88PM860x touchscreen"
  16         depends on MFD_88PM860X
  17         help
  18           Say Y here if you have a 88PM860x PMIC and want to enable
  19           support for the built-in touchscreen.
  20
  21           If unsure, say N.
  22
  23           To compile this driver as a module, choose M here: the
  24           module will be called 88pm860x-ts.
  25
  26 config TOUCHSCREEN_ADS7846
  27         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  28         depends on SPI_MASTER
  29         depends on HWMON = n || HWMON
  30         help
  31           Say Y here if you have a touchscreen interface using the
  32           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  33           and your board-specific setup code includes that in its
  34           table of SPI devices.
  35
  36           If HWMON is selected, and the driver is told the reference voltage
  37           on your board, you will also get hwmon interfaces for the voltage
  38           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  39
  40           If unsure, say N (but it's safe to say "Y").
  41
  42           To compile this driver as a module, choose M here: the
  43           module will be called ads7846.
  44
  45 config TOUCHSCREEN_AD7877
  46         tristate "AD7877 based touchscreens"
  47         depends on SPI_MASTER
  48         help
  49           Say Y here if you have a touchscreen interface using the
  50           AD7877 controller, and your board-specific initialization
  51           code includes that in its table of SPI devices.
  52
  53           If unsure, say N (but it's safe to say "Y").
  54
  55           To compile this driver as a module, choose M here: the
  56           module will be called ad7877.
  57
  58 config TOUCHSCREEN_AD7879
  59         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  60         help
  61           Say Y here if you want to support a touchscreen interface using
  62           the AD7879-1/AD7889-1 controller.
  63
  64           You should select a bus connection too.
  65
  66           To compile this driver as a module, choose M here: the
  67           module will be called ad7879.
  68
  69 config TOUCHSCREEN_AD7879_I2C
  70         tristate "support I2C bus connection"
  71         depends on TOUCHSCREEN_AD7879 && I2C
  72         help
  73           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  74
  75           To compile this driver as a module, choose M here: the
  76           module will be called ad7879-i2c.
  77
  78 config TOUCHSCREEN_AD7879_SPI
  79         tristate "support SPI bus connection"
  80         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  81         help
  82           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  83
  84           If unsure, say N (but it's safe to say "Y").
  85
  86           To compile this driver as a module, choose M here: the
  87           module will be called ad7879-spi.
  88
  89 config TOUCHSCREEN_ATMEL_MXT
  90         tristate "Atmel mXT I2C Touchscreen"
  91         depends on I2C
  92         help
  93           Say Y here if you have Atmel mXT series I2C touchscreen,
  94           such as AT42QT602240/ATMXT224, connected to your system.
  95
  96           If unsure, say N.
  97
  98           To compile this driver as a module, choose M here: the
  99           module will be called atmel_mxt_ts.
 100
 101 config TOUCHSCREEN_AUO_PIXCIR
 102         tristate "AUO in-cell touchscreen using Pixcir ICs"
 103         depends on I2C
 104         depends on GPIOLIB
 105         help
 106           Say Y here if you have a AUO display with in-cell touchscreen
 107           using Pixcir ICs.
 108
 109           If unsure, say N.
 110
 111           To compile this driver as a module, choose M here: the
 112           module will be called auo-pixcir-ts.
 113
 114 config TOUCHSCREEN_BITSY
 115         tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
 116         depends on SA1100_BITSY
 117         select SERIO
 118         help
 119           Say Y here if you have the h3600 (Bitsy) touchscreen.
 120
 121           If unsure, say N.
 122
 123           To compile this driver as a module, choose M here: the
 124           module will be called h3600_ts_input.
 125
 126 config TOUCHSCREEN_BU21013
 127         tristate "BU21013 based touch panel controllers"
 128         depends on I2C
 129         help
 130           Say Y here if you have a bu21013 touchscreen connected to
 131           your system.
 132
 133           If unsure, say N.
 134
 135           To compile this driver as a module, choose M here: the
 136           module will be called bu21013_ts.
 137
 138 config TOUCHSCREEN_CY8CTMG110
 139         tristate "cy8ctmg110 touchscreen"
 140         depends on I2C
 141         depends on GPIOLIB
 142         help
 143           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 144           an AAVA device.
 145
 146           If unsure, say N.
 147
 148           To compile this driver as a module, choose M here: the
 149           module will be called cy8ctmg110_ts.
 150
 151 config TOUCHSCREEN_CYTTSP_CORE
 152         tristate "Cypress TTSP touchscreen"
 153         help
 154           Say Y here if you have a touchscreen using controller from
 155           the Cypress TrueTouch(tm) Standard Product family connected
 156           to your system. You will also need to select appropriate
 157           bus connection below.
 158
 159           If unsure, say N.
 160
 161           To compile this driver as a module, choose M here: the
 162           module will be called cyttsp_core.
 163
 164 config TOUCHSCREEN_CYTTSP_I2C
 165         tristate "support I2C bus connection"
 166         depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 167         help
 168           Say Y here if the touchscreen is connected via I2C bus.
 169
 170           To compile this driver as a module, choose M here: the
 171           module will be called cyttsp_i2c.
 172
 173 config TOUCHSCREEN_CYTTSP_SPI
 174         tristate "support SPI bus connection"
 175         depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 176         help
 177           Say Y here if the touchscreen is connected via SPI bus.
 178
 179           To compile this driver as a module, choose M here: the
 180           module will be called cyttsp_spi.
 181
 182 config TOUCHSCREEN_DA9034
 183         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 184         depends on PMIC_DA903X
 185         default y
 186         help
 187           Say Y here to enable the support for the touchscreen found
 188           on Dialog Semiconductor DA9034 PMIC.
 189
 190           If unsure, say N.
 191
 192           To compile this driver as a module, choose M here: the
 193           module will be called da9034-ts.
 194
 195 config TOUCHSCREEN_DA9052
 196         tristate "Dialog DA9052/DA9053 TSI"
 197         depends on PMIC_DA9052
 198         help
 199           Say Y here to support the touchscreen found on Dialog Semiconductor
 200           DA9052-BC and DA9053-AA/Bx PMICs.
 201
 202           If unsure, say N.
 203
 204           To compile this driver as a module, choose M here: the
 205           module will be called da9052_tsi.
 206
 207 config TOUCHSCREEN_DYNAPRO
 208         tristate "Dynapro serial touchscreen"
 209         select SERIO
 210         help
 211           Say Y here if you have a Dynapro serial touchscreen connected to
 212           your system.
 213
 214           If unsure, say N.
 215
 216           To compile this driver as a module, choose M here: the
 217           module will be called dynapro.
 218
 219 config TOUCHSCREEN_HAMPSHIRE
 220         tristate "Hampshire serial touchscreen"
 221         select SERIO
 222         help
 223           Say Y here if you have a Hampshire serial touchscreen connected to
 224           your system.
 225
 226           If unsure, say N.
 227
 228           To compile this driver as a module, choose M here: the
 229           module will be called hampshire.
 230
 231 config TOUCHSCREEN_EETI
 232         tristate "EETI touchscreen panel support"
 233         depends on I2C
 234         help
 235           Say Y here to enable support for I2C connected EETI touch panels.
 236
 237           To compile this driver as a module, choose M here: the
 238           module will be called eeti_ts.
 239
 240 config TOUCHSCREEN_EGALAX
 241         tristate "EETI eGalax multi-touch panel support"
 242         depends on I2C && OF
 243         help
 244           Say Y here to enable support for I2C connected EETI
 245           eGalax multi-touch panels.
 246
 247           To compile this driver as a module, choose M here: the
 248           module will be called egalax_ts.
 249
 250 config TOUCHSCREEN_FUJITSU
 251         tristate "Fujitsu serial touchscreen"
 252         select SERIO
 253         help
 254           Say Y here if you have the Fujitsu touchscreen (such as one
 255           installed in Lifebook P series laptop) connected to your
 256           system.
 257
 258           If unsure, say N.
 259
 260           To compile this driver as a module, choose M here: the
 261           module will be called fujitsu-ts.
 262
 263 config TOUCHSCREEN_ILI210X
 264         tristate "Ilitek ILI210X based touchscreen"
 265         depends on I2C
 266         help
 267           Say Y here if you have a ILI210X based touchscreen
 268           controller. This driver supports models ILI2102,
 269           ILI2102s, ILI2103, ILI2103s and ILI2105.
 270           Such kind of chipsets can be found in Amazon Kindle Fire
 271           touchscreens.
 272
 273           If unsure, say N.
 274
 275           To compile this driver as a module, choose M here: the
 276           module will be called ili210x.
 277
 278 config TOUCHSCREEN_S3C2410
 279         tristate "Samsung S3C2410/generic touchscreen input driver"
 280         depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 281         select S3C_ADC
 282         help
 283           Say Y here if you have the s3c2410 touchscreen.
 284
 285           If unsure, say N.
 286
 287           To compile this driver as a module, choose M here: the
 288           module will be called s3c2410_ts.
 289
 290 config TOUCHSCREEN_GUNZE
 291         tristate "Gunze AHL-51S touchscreen"
 292         select SERIO
 293         help
 294           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 295           your system.
 296
 297           If unsure, say N.
 298
 299           To compile this driver as a module, choose M here: the
 300           module will be called gunze.
 301
 302 config TOUCHSCREEN_ELO
 303         tristate "Elo serial touchscreens"
 304         select SERIO
 305         help
 306           Say Y here if you have an Elo serial touchscreen connected to
 307           your system.
 308
 309           If unsure, say N.
 310
 311           To compile this driver as a module, choose M here: the
 312           module will be called elo.
 313
 314 config TOUCHSCREEN_WACOM_W8001
 315         tristate "Wacom W8001 penabled serial touchscreen"
 316         select SERIO
 317         help
 318           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 319           connected to your system.
 320
 321           If unsure, say N.
 322
 323           To compile this driver as a module, choose M here: the
 324           module will be called wacom_w8001.
 325
 326 config TOUCHSCREEN_WACOM_I2C
 327         tristate "Wacom Tablet support (I2C)"
 328         depends on I2C
 329         help
 330           Say Y here if you want to use the I2C version of the Wacom
 331           Pen Tablet.
 332
 333           If unsure, say N.
 334
 335           To compile this driver as a module, choose M here: the module
 336           will be called wacom_i2c.
 337
 338 config TOUCHSCREEN_LPC32XX
 339         tristate "LPC32XX touchscreen controller"
 340         depends on ARCH_LPC32XX
 341         help
 342           Say Y here if you have a LPC32XX device and want
 343           to support the built-in touchscreen.
 344
 345           To compile this driver as a module, choose M here: the
 346           module will be called lpc32xx_ts.
 347
 348 config TOUCHSCREEN_MAX11801
 349         tristate "MAX11801 based touchscreens"
 350         depends on I2C
 351         help
 352           Say Y here if you have a MAX11801 based touchscreen
 353           controller.
 354
 355           If unsure, say N.
 356
 357           To compile this driver as a module, choose M here: the
 358           module will be called max11801_ts.
 359
 360 config TOUCHSCREEN_MCS5000
 361         tristate "MELFAS MCS-5000 touchscreen"
 362         depends on I2C
 363         help
 364           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 365           chip in your system.
 366
 367           If unsure, say N.
 368
 369           To compile this driver as a module, choose M here: the
 370           module will be called mcs5000_ts.
 371
 372 config TOUCHSCREEN_MMS114
 373         tristate "MELFAS MMS114 touchscreen"
 374         depends on I2C
 375         help
 376           Say Y here if you have the MELFAS MMS114 touchscreen controller
 377           chip in your system.
 378
 379           If unsure, say N.
 380
 381           To compile this driver as a module, choose M here: the
 382           module will be called mms114.
 383
 384 config TOUCHSCREEN_MTOUCH
 385         tristate "MicroTouch serial touchscreens"
 386         select SERIO
 387         help
 388           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 389           your system.
 390
 391           If unsure, say N.
 392
 393           To compile this driver as a module, choose M here: the
 394           module will be called mtouch.
 395
 396 config TOUCHSCREEN_INEXIO
 397         tristate "iNexio serial touchscreens"
 398         select SERIO
 399         help
 400           Say Y here if you have an iNexio serial touchscreen connected to
 401           your system.
 402
 403           If unsure, say N.
 404
 405           To compile this driver as a module, choose M here: the
 406           module will be called inexio.
 407
 408 config TOUCHSCREEN_INTEL_MID
 409         tristate "Intel MID platform resistive touchscreen"
 410         depends on INTEL_SCU_IPC
 411         help
 412           Say Y here if you have a Intel MID based touchscreen in
 413           your system.
 414
 415           If unsure, say N.
 416
 417           To compile this driver as a module, choose M here: the
 418           module will be called intel_mid_touch.
 419
 420 config TOUCHSCREEN_MK712
 421         tristate "ICS MicroClock MK712 touchscreen"
 422         help
 423           Say Y here if you have the ICS MicroClock MK712 touchscreen
 424           controller chip in your system.
 425
 426           If unsure, say N.
 427
 428           To compile this driver as a module, choose M here: the
 429           module will be called mk712.
 430
 431 config TOUCHSCREEN_HP600
 432         tristate "HP Jornada 6xx touchscreen"
 433         depends on SH_HP6XX && SH_ADC
 434         help
 435           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 436           support the built-in touchscreen.
 437
 438           To compile this driver as a module, choose M here: the
 439           module will be called hp680_ts_input.
 440
 441 config TOUCHSCREEN_HP7XX
 442         tristate "HP Jornada 7xx touchscreen"
 443         depends on SA1100_JORNADA720_SSP
 444         help
 445           Say Y here if you have a HP Jornada 710/720/728 and want
 446           to support the built-in touchscreen.
 447
 448           To compile this driver as a module, choose M here: the
 449           module will be called jornada720_ts.
 450
 451 config TOUCHSCREEN_HTCPEN
 452         tristate "HTC Shift X9500 touchscreen"
 453         depends on ISA
 454         help
 455           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 456           Clio / Shangrila and want to support the built-in touchscreen.
 457
 458           If unsure, say N.
 459
 460           To compile this driver as a module, choose M here: the
 461           module will be called htcpen.
 462
 463 config TOUCHSCREEN_PENMOUNT
 464         tristate "Penmount serial touchscreen"
 465         select SERIO
 466         help
 467           Say Y here if you have a Penmount serial touchscreen connected to
 468           your system.
 469
 470           If unsure, say N.
 471
 472           To compile this driver as a module, choose M here: the
 473           module will be called penmount.
 474
 475 config TOUCHSCREEN_EDT_FT5X06
 476         tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 477         depends on I2C
 478         help
 479           Say Y here if you have an EDT "Polytouch" touchscreen based
 480           on the FocalTech FT5x06 family of controllers connected to
 481           your system.
 482
 483           If unsure, say N.
 484
 485           To compile this driver as a module, choose M here: the
 486           module will be called edt-ft5x06.
 487
 488 config TOUCHSCREEN_MIGOR
 489         tristate "Renesas MIGO-R touchscreen"
 490         depends on SH_MIGOR && I2C
 491         help
 492           Say Y here to enable MIGO-R touchscreen support.
 493
 494           If unsure, say N.
 495
 496           To compile this driver as a module, choose M here: the
 497           module will be called migor_ts.
 498
 499 config TOUCHSCREEN_TNETV107X
 500         tristate "TI TNETV107X touchscreen support"
 501         depends on ARCH_DAVINCI_TNETV107X
 502         help
 503           Say Y here if you want to use the TNETV107X touchscreen.
 504
 505           To compile this driver as a module, choose M here: the
 506           module will be called tnetv107x-ts.
 507
 508 config TOUCHSCREEN_TOUCHRIGHT
 509         tristate "Touchright serial touchscreen"
 510         select SERIO
 511         help
 512           Say Y here if you have a Touchright serial touchscreen connected to
 513           your system.
 514
 515           If unsure, say N.
 516
 517           To compile this driver as a module, choose M here: the
 518           module will be called touchright.
 519
 520 config TOUCHSCREEN_TOUCHWIN
 521         tristate "Touchwin serial touchscreen"
 522         select SERIO
 523         help
 524           Say Y here if you have a Touchwin serial touchscreen connected to
 525           your system.
 526
 527           If unsure, say N.
 528
 529           To compile this driver as a module, choose M here: the
 530           module will be called touchwin.
 531
 532 config TOUCHSCREEN_TI_AM335X_TSC
 533         tristate "TI Touchscreen Interface"
 534         depends on ARCH_OMAP2PLUS
 535         help
 536           Say Y here if you have 4/5/8 wire touchscreen controller
 537           to be connected to the ADC controller on your TI AM335x SoC.
 538
 539           If unsure, say N.
 540
 541           To compile this driver as a module, choose M here: the
 542           module will be called ti_am335x_tsc.
 543
 544 config TOUCHSCREEN_ATMEL_TSADCC
 545         tristate "Atmel Touchscreen Interface"
 546         depends on ARCH_AT91
 547         help
 548           Say Y here if you have a 4-wire touchscreen connected to the
 549           ADC Controller on your Atmel SoC.
 550
 551           If unsure, say N.
 552
 553           To compile this driver as a module, choose M here: the
 554           module will be called atmel_tsadcc.
 555
 556 config TOUCHSCREEN_UCB1400
 557         tristate "Philips UCB1400 touchscreen"
 558         depends on AC97_BUS
 559         depends on UCB1400_CORE
 560         help
 561           This enables support for the Philips UCB1400 touchscreen interface.
 562           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 563           will be initialized only after the ALSA subsystem has been
 564           brought up and the UCB1400 detected.  You therefore have to
 565           configure ALSA support as well (either built-in or modular,
 566           independently of whether this driver is itself built-in or
 567           modular) for this driver to work.
 568
 569           To compile this driver as a module, choose M here: the
 570           module will be called ucb1400_ts.
 571
 572 config TOUCHSCREEN_PIXCIR
 573         tristate "PIXCIR I2C touchscreens"
 574         depends on I2C
 575         help
 576           Say Y here if you have a pixcir i2c touchscreen
 577           controller.
 578
 579           If unsure, say N.
 580
 581           To compile this driver as a module, choose M here: the
 582           module will be called pixcir_i2c_ts.
 583
 584 config TOUCHSCREEN_WM831X
 585         tristate "Support for WM831x touchscreen controllers"
 586         depends on MFD_WM831X
 587         help
 588           This enables support for the touchscreen controller on the WM831x
 589           series of PMICs.
 590
 591           To compile this driver as a module, choose M here: the
 592           module will be called wm831x-ts.
 593
 594 config TOUCHSCREEN_WM97XX
 595         tristate "Support for WM97xx AC97 touchscreen controllers"
 596         depends on AC97_BUS
 597         help
 598           Say Y here if you have a Wolfson Microelectronics WM97xx
 599           touchscreen connected to your system. Note that this option
 600           only enables core driver, you will also need to select
 601           support for appropriate chip below.
 602
 603           If unsure, say N.
 604
 605           To compile this driver as a module, choose M here: the
 606           module will be called wm97xx-ts.
 607
 608 config TOUCHSCREEN_WM9705
 609         bool "WM9705 Touchscreen interface support"
 610         depends on TOUCHSCREEN_WM97XX
 611         default y
 612         help
 613           Say Y here to enable support for the Wolfson Microelectronics
 614           WM9705 touchscreen controller.
 615
 616 config TOUCHSCREEN_WM9712
 617         bool "WM9712 Touchscreen interface support"
 618         depends on TOUCHSCREEN_WM97XX
 619         default y
 620         help
 621           Say Y here to enable support for the Wolfson Microelectronics
 622           WM9712 touchscreen controller.
 623
 624 config TOUCHSCREEN_WM9713
 625         bool "WM9713 Touchscreen interface support"
 626         depends on TOUCHSCREEN_WM97XX
 627         default y
 628         help
 629           Say Y here to enable support for the Wolfson Microelectronics
 630           WM9713 touchscreen controller.
 631
 632 config TOUCHSCREEN_WM97XX_ATMEL
 633         tristate "WM97xx Atmel accelerated touch"
 634         depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
 635         help
 636           Say Y here for support for streaming mode with WM97xx touchscreens
 637           on Atmel AT91 or AVR32 systems with an AC97C module.
 638
 639           Be aware that this will use channel B in the controller for
 640           streaming data, this must not conflict with other AC97C drivers.
 641
 642           If unsure, say N.
 643
 644           To compile this driver as a module, choose M here: the module will
 645           be called atmel-wm97xx.
 646
 647 config TOUCHSCREEN_WM97XX_MAINSTONE
 648         tristate "WM97xx Mainstone/Palm accelerated touch"
 649         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 650         help
 651           Say Y here for support for streaming mode with WM97xx touchscreens
 652           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 653
 654           If unsure, say N.
 655
 656           To compile this driver as a module, choose M here: the
 657           module will be called mainstone-wm97xx.
 658
 659 config TOUCHSCREEN_WM97XX_ZYLONITE
 660         tristate "Zylonite accelerated touch"
 661         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 662         select TOUCHSCREEN_WM9713
 663         help
 664           Say Y here for support for streaming mode with the touchscreen
 665           on Zylonite systems.
 666
 667           If unsure, say N.
 668
 669           To compile this driver as a module, choose M here: the
 670           module will be called zylonite-wm97xx.
 671
 672 config TOUCHSCREEN_USB_COMPOSITE
 673         tristate "USB Touchscreen Driver"
 674         depends on USB_ARCH_HAS_HCD
 675         select USB
 676         help
 677           USB Touchscreen driver for:
 678           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 679           - PanJit TouchSet USB
 680           - 3M MicroTouch USB (EX II series)
 681           - ITM
 682           - some other eTurboTouch
 683           - Gunze AHL61
 684           - DMC TSC-10/25
 685           - IRTOUCHSYSTEMS/UNITOP
 686           - IdealTEK URTC1000
 687           - GoTop Super_Q2/GogoPen/PenPower tablets
 688           - JASTEC USB Touch Controller/DigiTech DTR-02U
 689           - Zytronic controllers
 690           - Elo TouchSystems 2700 IntelliTouch
 691           - EasyTouch USB Touch Controller from Data Modul
 692           - e2i (Mimo monitors)
 693
 694           Have a look at <http://linux.chapter7.ch/touchkit/> for
 695           a usage description and the required user-space stuff.
 696
 697           To compile this driver as a module, choose M here: the
 698           module will be called usbtouchscreen.
 699
 700 config TOUCHSCREEN_MC13783
 701         tristate "Freescale MC13783 touchscreen input driver"
 702         depends on MFD_MC13783
 703         help
 704           Say Y here if you have an Freescale MC13783 PMIC on your
 705           board and want to use its touchscreen
 706
 707           If unsure, say N.
 708
 709           To compile this driver as a module, choose M here: the
 710           module will be called mc13783_ts.
 711
 712 config TOUCHSCREEN_USB_EGALAX
 713         default y
 714         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 715         depends on TOUCHSCREEN_USB_COMPOSITE
 716
 717 config TOUCHSCREEN_USB_PANJIT
 718         default y
 719         bool "PanJit device support" if EXPERT
 720         depends on TOUCHSCREEN_USB_COMPOSITE
 721
 722 config TOUCHSCREEN_USB_3M
 723         default y
 724         bool "3M/Microtouch EX II series device support" if EXPERT
 725         depends on TOUCHSCREEN_USB_COMPOSITE
 726
 727 config TOUCHSCREEN_USB_ITM
 728         default y
 729         bool "ITM device support" if EXPERT
 730         depends on TOUCHSCREEN_USB_COMPOSITE
 731
 732 config TOUCHSCREEN_USB_ETURBO
 733         default y
 734         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 735         depends on TOUCHSCREEN_USB_COMPOSITE
 736
 737 config TOUCHSCREEN_USB_GUNZE
 738         default y
 739         bool "Gunze AHL61 device support" if EXPERT
 740         depends on TOUCHSCREEN_USB_COMPOSITE
 741
 742 config TOUCHSCREEN_USB_DMC_TSC10
 743         default y
 744         bool "DMC TSC-10/25 device support" if EXPERT
 745         depends on TOUCHSCREEN_USB_COMPOSITE
 746
 747 config TOUCHSCREEN_USB_IRTOUCH
 748         default y
 749         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 750         depends on TOUCHSCREEN_USB_COMPOSITE
 751
 752 config TOUCHSCREEN_USB_IDEALTEK
 753         default y
 754         bool "IdealTEK URTC1000 device support" if EXPERT
 755         depends on TOUCHSCREEN_USB_COMPOSITE
 756
 757 config TOUCHSCREEN_USB_GENERAL_TOUCH
 758         default y
 759         bool "GeneralTouch Touchscreen device support" if EXPERT
 760         depends on TOUCHSCREEN_USB_COMPOSITE
 761
 762 config TOUCHSCREEN_USB_GOTOP
 763         default y
 764         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 765         depends on TOUCHSCREEN_USB_COMPOSITE
 766
 767 config TOUCHSCREEN_USB_JASTEC
 768         default y
 769         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 770         depends on TOUCHSCREEN_USB_COMPOSITE
 771
 772 config TOUCHSCREEN_USB_ELO
 773         default y
 774         bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 775         depends on TOUCHSCREEN_USB_COMPOSITE
 776
 777 config TOUCHSCREEN_USB_E2I
 778         default y
 779         bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 780         depends on TOUCHSCREEN_USB_COMPOSITE
 781
 782 config TOUCHSCREEN_USB_ZYTRONIC
 783         default y
 784         bool "Zytronic controller" if EXPERT
 785         depends on TOUCHSCREEN_USB_COMPOSITE
 786
 787 config TOUCHSCREEN_USB_ETT_TC45USB
 788         default y
 789         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 790         depends on TOUCHSCREEN_USB_COMPOSITE
 791
 792 config TOUCHSCREEN_USB_NEXIO
 793         default y
 794         bool "NEXIO/iNexio device support" if EXPERT
 795         depends on TOUCHSCREEN_USB_COMPOSITE
 796
 797 config TOUCHSCREEN_USB_EASYTOUCH
 798         default y
 799         bool "EasyTouch USB Touch controller device support" if EMBEDDED
 800         depends on TOUCHSCREEN_USB_COMPOSITE
 801         help
 802           Say Y here if you have an EasyTouch USB Touch controller.
 803           If unsure, say N.
 804
 805 config TOUCHSCREEN_TOUCHIT213
 806         tristate "Sahara TouchIT-213 touchscreen"
 807         select SERIO
 808         help
 809           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 810
 811           If unsure, say N.
 812
 813           To compile this driver as a module, choose M here: the
 814           module will be called touchit213.
 815
 816 config TOUCHSCREEN_TSC_SERIO
 817         tristate "TSC-10/25/40 serial touchscreen support"
 818         select SERIO
 819         help
 820           Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 821           to your system.
 822
 823           If unsure, say N.
 824
 825           To compile this driver as a module, choose M here: the
 826           module will be called tsc40.
 827
 828 config TOUCHSCREEN_TSC2005
 829         tristate "TSC2005 based touchscreens"
 830         depends on SPI_MASTER && GENERIC_HARDIRQS
 831         help
 832           Say Y here if you have a TSC2005 based touchscreen.
 833
 834           If unsure, say N.
 835
 836           To compile this driver as a module, choose M here: the
 837           module will be called tsc2005.
 838
 839 config TOUCHSCREEN_TSC2007
 840         tristate "TSC2007 based touchscreens"
 841         depends on I2C
 842         help
 843           Say Y here if you have a TSC2007 based touchscreen.
 844
 845           If unsure, say N.
 846
 847           To compile this driver as a module, choose M here: the
 848           module will be called tsc2007.
 849
 850 config TOUCHSCREEN_W90X900
 851         tristate "W90P910 touchscreen driver"
 852         depends on HAVE_CLK
 853         help
 854           Say Y here if you have a W90P910 based touchscreen.
 855
 856           To compile this driver as a module, choose M here: the
 857           module will be called w90p910_ts.
 858
 859 config TOUCHSCREEN_PCAP
 860         tristate "Motorola PCAP touchscreen"
 861         depends on EZX_PCAP
 862         help
 863           Say Y here if you have a Motorola EZX telephone and
 864           want to enable support for the built-in touchscreen.
 865
 866           To compile this driver as a module, choose M here: the
 867           module will be called pcap_ts.
 868
 869 config TOUCHSCREEN_ST1232
 870         tristate "Sitronix ST1232 touchscreen controllers"
 871         depends on I2C
 872         help
 873           Say Y here if you want to support Sitronix ST1232
 874           touchscreen controller.
 875
 876           If unsure, say N.
 877
 878           To compile this driver as a module, choose M here: the
 879           module will be called st1232_ts.
 880
 881 config TOUCHSCREEN_STMPE
 882         tristate "STMicroelectronics STMPE touchscreens"
 883         depends on MFD_STMPE
 884         help
 885           Say Y here if you want support for STMicroelectronics
 886           STMPE touchscreen controllers.
 887
 888           To compile this driver as a module, choose M here: the
 889           module will be called stmpe-ts.
 890
 891 config TOUCHSCREEN_TPS6507X
 892         tristate "TPS6507x based touchscreens"
 893         depends on I2C
 894         help
 895           Say Y here if you have a TPS6507x based touchscreen
 896           controller.
 897
 898           If unsure, say N.
 899
 900           To compile this driver as a module, choose M here: the
 901           module will be called tps6507x_ts.
 902
 903 endif