drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_PROPERTIES
  15         def_tristate INPUT
  16         depends on INPUT
  17
  18 config TOUCHSCREEN_88PM860X
  19         tristate "Marvell 88PM860x touchscreen"
  20         depends on MFD_88PM860X
  21         help
  22           Say Y here if you have a 88PM860x PMIC and want to enable
  23           support for the built-in touchscreen.
  24
  25           If unsure, say N.
  26
  27           To compile this driver as a module, choose M here: the
  28           module will be called 88pm860x-ts.
  29
  30 config TOUCHSCREEN_ADS7846
  31         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  32         depends on SPI_MASTER
  33         depends on HWMON = n || HWMON
  34         help
  35           Say Y here if you have a touchscreen interface using the
  36           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  37           and your board-specific setup code includes that in its
  38           table of SPI devices.
  39
  40           If HWMON is selected, and the driver is told the reference voltage
  41           on your board, you will also get hwmon interfaces for the voltage
  42           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  43
  44           If unsure, say N (but it's safe to say "Y").
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called ads7846.
  48
  49 config TOUCHSCREEN_AD7877
  50         tristate "AD7877 based touchscreens"
  51         depends on SPI_MASTER
  52         help
  53           Say Y here if you have a touchscreen interface using the
  54           AD7877 controller, and your board-specific initialization
  55           code includes that in its table of SPI devices.
  56
  57           If unsure, say N (but it's safe to say "Y").
  58
  59           To compile this driver as a module, choose M here: the
  60           module will be called ad7877.
  61
  62 config TOUCHSCREEN_AD7879
  63         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  64         help
  65           Say Y here if you want to support a touchscreen interface using
  66           the AD7879-1/AD7889-1 controller.
  67
  68           You should select a bus connection too.
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ad7879.
  72
  73 config TOUCHSCREEN_AD7879_I2C
  74         tristate "support I2C bus connection"
  75         depends on TOUCHSCREEN_AD7879 && I2C
  76         help
  77           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called ad7879-i2c.
  81
  82 config TOUCHSCREEN_AD7879_SPI
  83         tristate "support SPI bus connection"
  84         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  85         help
  86           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  87
  88           If unsure, say N (but it's safe to say "Y").
  89
  90           To compile this driver as a module, choose M here: the
  91           module will be called ad7879-spi.
  92
  93 config TOUCHSCREEN_AR1021_I2C
  94         tristate "Microchip AR1021 i2c touchscreen"
  95         depends on I2C && OF
  96         help
  97           Say Y here if you have the Microchip AR1021 touchscreen controller
  98           chip in your system.
  99
 100           If unsure, say N.
 101
 102           To compile this driver as a module, choose M here: the
 103           module will be called ar1021_i2c.
 104
 105 config TOUCHSCREEN_ATMEL_MXT
 106         tristate "Atmel mXT I2C Touchscreen"
 107         depends on I2C
 108         select FW_LOADER
 109         help
 110           Say Y here if you have Atmel mXT series I2C touchscreen,
 111           such as AT42QT602240/ATMXT224, connected to your system.
 112
 113           If unsure, say N.
 114
 115           To compile this driver as a module, choose M here: the
 116           module will be called atmel_mxt_ts.
 117
 118 config TOUCHSCREEN_AUO_PIXCIR
 119         tristate "AUO in-cell touchscreen using Pixcir ICs"
 120         depends on I2C
 121         depends on GPIOLIB || COMPILE_TEST
 122         help
 123           Say Y here if you have a AUO display with in-cell touchscreen
 124           using Pixcir ICs.
 125
 126           If unsure, say N.
 127
 128           To compile this driver as a module, choose M here: the
 129           module will be called auo-pixcir-ts.
 130
 131 config TOUCHSCREEN_BU21013
 132         tristate "BU21013 based touch panel controllers"
 133         depends on I2C
 134         help
 135           Say Y here if you have a bu21013 touchscreen connected to
 136           your system.
 137
 138           If unsure, say N.
 139
 140           To compile this driver as a module, choose M here: the
 141           module will be called bu21013_ts.
 142
 143 config TOUCHSCREEN_CHIPONE_ICN8318
 144         tristate "chipone icn8318 touchscreen controller"
 145         depends on GPIOLIB || COMPILE_TEST
 146         depends on I2C
 147         depends on OF
 148         help
 149           Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
 150
 151           If unsure, say N.
 152
 153           To compile this driver as a module, choose M here: the
 154           module will be called chipone_icn8318.
 155
 156 config TOUCHSCREEN_CY8CTMG110
 157         tristate "cy8ctmg110 touchscreen"
 158         depends on I2C
 159         depends on GPIOLIB || COMPILE_TEST
 160         help
 161           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 162           an AAVA device.
 163
 164           If unsure, say N.
 165
 166           To compile this driver as a module, choose M here: the
 167           module will be called cy8ctmg110_ts.
 168
 169 config TOUCHSCREEN_CYTTSP_CORE
 170         tristate "Cypress TTSP touchscreen"
 171         help
 172           Say Y here if you have a touchscreen using controller from
 173           the Cypress TrueTouch(tm) Standard Product family connected
 174           to your system. You will also need to select appropriate
 175           bus connection below.
 176
 177           If unsure, say N.
 178
 179           To compile this driver as a module, choose M here: the
 180           module will be called cyttsp_core.
 181
 182 config TOUCHSCREEN_CYTTSP_I2C
 183         tristate "support I2C bus connection"
 184         depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 185         help
 186           Say Y here if the touchscreen is connected via I2C bus.
 187
 188           To compile this driver as a module, choose M here: the
 189           module will be called cyttsp_i2c.
 190
 191 config TOUCHSCREEN_CYTTSP_SPI
 192         tristate "support SPI bus connection"
 193         depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 194         help
 195           Say Y here if the touchscreen is connected via SPI bus.
 196
 197           To compile this driver as a module, choose M here: the
 198           module will be called cyttsp_spi.
 199
 200 config TOUCHSCREEN_CYTTSP4_CORE
 201         tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 202         help
 203           Core driver for Cypress TrueTouch(tm) Standard Product
 204           Generation4 touchscreen controllers.
 205
 206           Say Y here if you have a Cypress Gen4 touchscreen.
 207
 208           If unsure, say N.
 209
 210           To compile this driver as a module, choose M here.
 211
 212 config TOUCHSCREEN_CYTTSP4_I2C
 213         tristate "support I2C bus connection"
 214         depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 215         help
 216           Say Y here if the touchscreen is connected via I2C bus.
 217
 218           To compile this driver as a module, choose M here: the
 219           module will be called cyttsp4_i2c.
 220
 221 config TOUCHSCREEN_CYTTSP4_SPI
 222         tristate "support SPI bus connection"
 223         depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 224         help
 225           Say Y here if the touchscreen is connected via SPI bus.
 226
 227           To compile this driver as a module, choose M here: the
 228           module will be called cyttsp4_spi.
 229
 230 config TOUCHSCREEN_DA9034
 231         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 232         depends on PMIC_DA903X
 233         default y
 234         help
 235           Say Y here to enable the support for the touchscreen found
 236           on Dialog Semiconductor DA9034 PMIC.
 237
 238           If unsure, say N.
 239
 240           To compile this driver as a module, choose M here: the
 241           module will be called da9034-ts.
 242
 243 config TOUCHSCREEN_DA9052
 244         tristate "Dialog DA9052/DA9053 TSI"
 245         depends on PMIC_DA9052
 246         help
 247           Say Y here to support the touchscreen found on Dialog Semiconductor
 248           DA9052-BC and DA9053-AA/Bx PMICs.
 249
 250           If unsure, say N.
 251
 252           To compile this driver as a module, choose M here: the
 253           module will be called da9052_tsi.
 254
 255 config TOUCHSCREEN_DYNAPRO
 256         tristate "Dynapro serial touchscreen"
 257         select SERIO
 258         help
 259           Say Y here if you have a Dynapro serial touchscreen connected to
 260           your system.
 261
 262           If unsure, say N.
 263
 264           To compile this driver as a module, choose M here: the
 265           module will be called dynapro.
 266
 267 config TOUCHSCREEN_HAMPSHIRE
 268         tristate "Hampshire serial touchscreen"
 269         select SERIO
 270         help
 271           Say Y here if you have a Hampshire serial touchscreen connected to
 272           your system.
 273
 274           If unsure, say N.
 275
 276           To compile this driver as a module, choose M here: the
 277           module will be called hampshire.
 278
 279 config TOUCHSCREEN_EETI
 280         tristate "EETI touchscreen panel support"
 281         depends on I2C
 282         help
 283           Say Y here to enable support for I2C connected EETI touch panels.
 284
 285           To compile this driver as a module, choose M here: the
 286           module will be called eeti_ts.
 287
 288 config TOUCHSCREEN_EGALAX
 289         tristate "EETI eGalax multi-touch panel support"
 290         depends on I2C && OF
 291         help
 292           Say Y here to enable support for I2C connected EETI
 293           eGalax multi-touch panels.
 294
 295           To compile this driver as a module, choose M here: the
 296           module will be called egalax_ts.
 297
 298 config TOUCHSCREEN_EGALAX_SERIAL
 299         tristate "EETI eGalax serial touchscreen"
 300         select SERIO
 301         help
 302           Say Y here to enable support for serial connected EETI
 303           eGalax touch panels.
 304
 305           To compile this driver as a module, choose M here: the
 306           module will be called egalax_ts_serial.
 307
 308 config TOUCHSCREEN_FT6236
 309         tristate "FT6236 I2C touchscreen"
 310         depends on I2C
 311         depends on GPIOLIB || COMPILE_TEST
 312         help
 313           Say Y here to enable support for the I2C connected FT6x06 and
 314           FT6x36 family of capacitive touchscreen drivers.
 315
 316           If unsure, say N.
 317
 318           To compile this driver as a module, choose M here: the
 319           module will be called ft6236.
 320
 321 config TOUCHSCREEN_FUJITSU
 322         tristate "Fujitsu serial touchscreen"
 323         select SERIO
 324         help
 325           Say Y here if you have the Fujitsu touchscreen (such as one
 326           installed in Lifebook P series laptop) connected to your
 327           system.
 328
 329           If unsure, say N.
 330
 331           To compile this driver as a module, choose M here: the
 332           module will be called fujitsu-ts.
 333
 334 config TOUCHSCREEN_GOODIX
 335         tristate "Goodix I2C touchscreen"
 336         depends on I2C
 337         depends on GPIOLIB || COMPILE_TEST
 338         help
 339           Say Y here if you have the Goodix touchscreen (such as one
 340           installed in Onda v975w tablets) connected to your
 341           system. It also supports 5-finger chip models, which can be
 342           found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 343
 344           If unsure, say N.
 345
 346           To compile this driver as a module, choose M here: the
 347           module will be called goodix.
 348
 349 config TOUCHSCREEN_ILI210X
 350         tristate "Ilitek ILI210X based touchscreen"
 351         depends on I2C
 352         help
 353           Say Y here if you have a ILI210X based touchscreen
 354           controller. This driver supports models ILI2102,
 355           ILI2102s, ILI2103, ILI2103s and ILI2105.
 356           Such kind of chipsets can be found in Amazon Kindle Fire
 357           touchscreens.
 358
 359           If unsure, say N.
 360
 361           To compile this driver as a module, choose M here: the
 362           module will be called ili210x.
 363
 364 config TOUCHSCREEN_IPROC
 365         tristate "IPROC touch panel driver support"
 366         depends on ARCH_BCM_IPROC || COMPILE_TEST
 367         help
 368           Say Y here if you want to add support for the IPROC touch
 369           controller to your system.
 370
 371           If unsure, say N.
 372
 373           To compile this driver as a module, choose M here: the
 374           module will be called bcm_iproc_tsc.
 375
 376 config TOUCHSCREEN_S3C2410
 377         tristate "Samsung S3C2410/generic touchscreen input driver"
 378         depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 379         depends on S3C_ADC
 380         help
 381           Say Y here if you have the s3c2410 touchscreen.
 382
 383           If unsure, say N.
 384
 385           To compile this driver as a module, choose M here: the
 386           module will be called s3c2410_ts.
 387
 388 config TOUCHSCREEN_GUNZE
 389         tristate "Gunze AHL-51S touchscreen"
 390         select SERIO
 391         help
 392           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 393           your system.
 394
 395           If unsure, say N.
 396
 397           To compile this driver as a module, choose M here: the
 398           module will be called gunze.
 399
 400 config TOUCHSCREEN_ELAN
 401         tristate "Elan eKTH I2C touchscreen"
 402         depends on I2C
 403         help
 404           Say Y here if you have an Elan eKTH I2C touchscreen
 405           connected to your system.
 406
 407           If unsure, say N.
 408
 409           To compile this driver as a module, choose M here: the
 410           module will be called elants_i2c.
 411
 412 config TOUCHSCREEN_ELO
 413         tristate "Elo serial touchscreens"
 414         select SERIO
 415         help
 416           Say Y here if you have an Elo serial touchscreen connected to
 417           your system.
 418
 419           If unsure, say N.
 420
 421           To compile this driver as a module, choose M here: the
 422           module will be called elo.
 423
 424 config TOUCHSCREEN_WACOM_W8001
 425         tristate "Wacom W8001 penabled serial touchscreen"
 426         select SERIO
 427         help
 428           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 429           connected to your system.
 430
 431           If unsure, say N.
 432
 433           To compile this driver as a module, choose M here: the
 434           module will be called wacom_w8001.
 435
 436 config TOUCHSCREEN_WACOM_I2C
 437         tristate "Wacom Tablet support (I2C)"
 438         depends on I2C
 439         help
 440           Say Y here if you want to use the I2C version of the Wacom
 441           Pen Tablet.
 442
 443           If unsure, say N.
 444
 445           To compile this driver as a module, choose M here: the module
 446           will be called wacom_i2c.
 447
 448 config TOUCHSCREEN_LPC32XX
 449         tristate "LPC32XX touchscreen controller"
 450         depends on ARCH_LPC32XX
 451         help
 452           Say Y here if you have a LPC32XX device and want
 453           to support the built-in touchscreen.
 454
 455           To compile this driver as a module, choose M here: the
 456           module will be called lpc32xx_ts.
 457
 458 config TOUCHSCREEN_MAX11801
 459         tristate "MAX11801 based touchscreens"
 460         depends on I2C
 461         help
 462           Say Y here if you have a MAX11801 based touchscreen
 463           controller.
 464
 465           If unsure, say N.
 466
 467           To compile this driver as a module, choose M here: the
 468           module will be called max11801_ts.
 469
 470 config TOUCHSCREEN_MCS5000
 471         tristate "MELFAS MCS-5000 touchscreen"
 472         depends on I2C
 473         help
 474           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 475           chip in your system.
 476
 477           If unsure, say N.
 478
 479           To compile this driver as a module, choose M here: the
 480           module will be called mcs5000_ts.
 481
 482 config TOUCHSCREEN_MMS114
 483         tristate "MELFAS MMS114 touchscreen"
 484         depends on I2C
 485         help
 486           Say Y here if you have the MELFAS MMS114 touchscreen controller
 487           chip in your system.
 488
 489           If unsure, say N.
 490
 491           To compile this driver as a module, choose M here: the
 492           module will be called mms114.
 493
 494 config TOUCHSCREEN_MELFAS_MIP4
 495         tristate "MELFAS MIP4 Touchscreen"
 496         depends on I2C
 497         help
 498           Say Y here if you have a MELFAS MIP4 Touchscreen device.
 499
 500           If unsure, say N.
 501
 502           To compile this driver as a module, choose M here:
 503           the module will be called melfas_mip4.
 504
 505 config TOUCHSCREEN_MTOUCH
 506         tristate "MicroTouch serial touchscreens"
 507         select SERIO
 508         help
 509           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 510           your system.
 511
 512           If unsure, say N.
 513
 514           To compile this driver as a module, choose M here: the
 515           module will be called mtouch.
 516
 517 config TOUCHSCREEN_IMX6UL_TSC
 518         tristate "Freescale i.MX6UL touchscreen controller"
 519         depends on (OF && GPIOLIB) || COMPILE_TEST
 520         help
 521           Say Y here if you have a Freescale i.MX6UL, and want to
 522           use the internal touchscreen controller.
 523
 524           If unsure, say N.
 525
 526           To compile this driver as a module, choose M here: the
 527           module will be called imx6ul_tsc.
 528
 529 config TOUCHSCREEN_INEXIO
 530         tristate "iNexio serial touchscreens"
 531         select SERIO
 532         help
 533           Say Y here if you have an iNexio serial touchscreen connected to
 534           your system.
 535
 536           If unsure, say N.
 537
 538           To compile this driver as a module, choose M here: the
 539           module will be called inexio.
 540
 541 config TOUCHSCREEN_INTEL_MID
 542         tristate "Intel MID platform resistive touchscreen"
 543         depends on INTEL_SCU_IPC
 544         help
 545           Say Y here if you have a Intel MID based touchscreen in
 546           your system.
 547
 548           If unsure, say N.
 549
 550           To compile this driver as a module, choose M here: the
 551           module will be called intel_mid_touch.
 552
 553 config TOUCHSCREEN_MK712
 554         tristate "ICS MicroClock MK712 touchscreen"
 555         help
 556           Say Y here if you have the ICS MicroClock MK712 touchscreen
 557           controller chip in your system.
 558
 559           If unsure, say N.
 560
 561           To compile this driver as a module, choose M here: the
 562           module will be called mk712.
 563
 564 config TOUCHSCREEN_HP600
 565         tristate "HP Jornada 6xx touchscreen"
 566         depends on SH_HP6XX && SH_ADC
 567         help
 568           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 569           support the built-in touchscreen.
 570
 571           To compile this driver as a module, choose M here: the
 572           module will be called hp680_ts_input.
 573
 574 config TOUCHSCREEN_HP7XX
 575         tristate "HP Jornada 7xx touchscreen"
 576         depends on SA1100_JORNADA720_SSP
 577         help
 578           Say Y here if you have a HP Jornada 710/720/728 and want
 579           to support the built-in touchscreen.
 580
 581           To compile this driver as a module, choose M here: the
 582           module will be called jornada720_ts.
 583
 584 config TOUCHSCREEN_IPAQ_MICRO
 585         tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 586         depends on MFD_IPAQ_MICRO
 587         help
 588           Say Y here to enable support for the touchscreen attached to
 589           the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 590
 591           If unsure, say N.
 592
 593           To compile this driver as a module, choose M here: the
 594           module will be called ipaq-micro-ts.
 595
 596 config TOUCHSCREEN_HTCPEN
 597         tristate "HTC Shift X9500 touchscreen"
 598         depends on ISA
 599         help
 600           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 601           Clio / Shangrila and want to support the built-in touchscreen.
 602
 603           If unsure, say N.
 604
 605           To compile this driver as a module, choose M here: the
 606           module will be called htcpen.
 607
 608 config TOUCHSCREEN_PENMOUNT
 609         tristate "Penmount serial touchscreen"
 610         select SERIO
 611         help
 612           Say Y here if you have a Penmount serial touchscreen connected to
 613           your system.
 614
 615           If unsure, say N.
 616
 617           To compile this driver as a module, choose M here: the
 618           module will be called penmount.
 619
 620 config TOUCHSCREEN_EDT_FT5X06
 621         tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 622         depends on I2C
 623         help
 624           Say Y here if you have an EDT "Polytouch" touchscreen based
 625           on the FocalTech FT5x06 family of controllers connected to
 626           your system.
 627
 628           If unsure, say N.
 629
 630           To compile this driver as a module, choose M here: the
 631           module will be called edt-ft5x06.
 632
 633 config TOUCHSCREEN_MIGOR
 634         tristate "Renesas MIGO-R touchscreen"
 635         depends on (SH_MIGOR || COMPILE_TEST) && I2C
 636         help
 637           Say Y here to enable MIGO-R touchscreen support.
 638
 639           If unsure, say N.
 640
 641           To compile this driver as a module, choose M here: the
 642           module will be called migor_ts.
 643
 644 config TOUCHSCREEN_TOUCHRIGHT
 645         tristate "Touchright serial touchscreen"
 646         select SERIO
 647         help
 648           Say Y here if you have a Touchright serial touchscreen connected to
 649           your system.
 650
 651           If unsure, say N.
 652
 653           To compile this driver as a module, choose M here: the
 654           module will be called touchright.
 655
 656 config TOUCHSCREEN_TOUCHWIN
 657         tristate "Touchwin serial touchscreen"
 658         select SERIO
 659         help
 660           Say Y here if you have a Touchwin serial touchscreen connected to
 661           your system.
 662
 663           If unsure, say N.
 664
 665           To compile this driver as a module, choose M here: the
 666           module will be called touchwin.
 667
 668 config TOUCHSCREEN_TI_AM335X_TSC
 669         tristate "TI Touchscreen Interface"
 670         depends on MFD_TI_AM335X_TSCADC
 671         help
 672           Say Y here if you have 4/5/8 wire touchscreen controller
 673           to be connected to the ADC controller on your TI AM335x SoC.
 674
 675           If unsure, say N.
 676
 677           To compile this driver as a module, choose M here: the
 678           module will be called ti_am335x_tsc.
 679
 680 config TOUCHSCREEN_UCB1400
 681         tristate "Philips UCB1400 touchscreen"
 682         depends on AC97_BUS
 683         depends on UCB1400_CORE
 684         help
 685           This enables support for the Philips UCB1400 touchscreen interface.
 686           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 687           will be initialized only after the ALSA subsystem has been
 688           brought up and the UCB1400 detected.  You therefore have to
 689           configure ALSA support as well (either built-in or modular,
 690           independently of whether this driver is itself built-in or
 691           modular) for this driver to work.
 692
 693           To compile this driver as a module, choose M here: the
 694           module will be called ucb1400_ts.
 695
 696 config TOUCHSCREEN_PIXCIR
 697         tristate "PIXCIR I2C touchscreens"
 698         depends on I2C
 699         help
 700           Say Y here if you have a pixcir i2c touchscreen
 701           controller.
 702
 703           If unsure, say N.
 704
 705           To compile this driver as a module, choose M here: the
 706           module will be called pixcir_i2c_ts.
 707
 708 config TOUCHSCREEN_WDT87XX_I2C
 709         tristate "Weida HiTech I2C touchscreen"
 710         depends on I2C
 711         help
 712           Say Y here if you have a Weida WDT87XX I2C touchscreen
 713           connected to your system.
 714
 715           If unsure, say N.
 716
 717           To compile this driver as a module, choose M here: the
 718           module will be called wdt87xx_i2c.
 719
 720 config TOUCHSCREEN_WM831X
 721         tristate "Support for WM831x touchscreen controllers"
 722         depends on MFD_WM831X
 723         help
 724           This enables support for the touchscreen controller on the WM831x
 725           series of PMICs.
 726
 727           To compile this driver as a module, choose M here: the
 728           module will be called wm831x-ts.
 729
 730 config TOUCHSCREEN_WM97XX
 731         tristate "Support for WM97xx AC97 touchscreen controllers"
 732         depends on AC97_BUS
 733         help
 734           Say Y here if you have a Wolfson Microelectronics WM97xx
 735           touchscreen connected to your system. Note that this option
 736           only enables core driver, you will also need to select
 737           support for appropriate chip below.
 738
 739           If unsure, say N.
 740
 741           To compile this driver as a module, choose M here: the
 742           module will be called wm97xx-ts.
 743
 744 config TOUCHSCREEN_WM9705
 745         bool "WM9705 Touchscreen interface support"
 746         depends on TOUCHSCREEN_WM97XX
 747         default y
 748         help
 749           Say Y here to enable support for the Wolfson Microelectronics
 750           WM9705 touchscreen controller.
 751
 752 config TOUCHSCREEN_WM9712
 753         bool "WM9712 Touchscreen interface support"
 754         depends on TOUCHSCREEN_WM97XX
 755         default y
 756         help
 757           Say Y here to enable support for the Wolfson Microelectronics
 758           WM9712 touchscreen controller.
 759
 760 config TOUCHSCREEN_WM9713
 761         bool "WM9713 Touchscreen interface support"
 762         depends on TOUCHSCREEN_WM97XX
 763         default y
 764         help
 765           Say Y here to enable support for the Wolfson Microelectronics
 766           WM9713 touchscreen controller.
 767
 768 config TOUCHSCREEN_WM97XX_ATMEL
 769         tristate "WM97xx Atmel accelerated touch"
 770         depends on TOUCHSCREEN_WM97XX && AVR32
 771         help
 772           Say Y here for support for streaming mode with WM97xx touchscreens
 773           on Atmel AT91 or AVR32 systems with an AC97C module.
 774
 775           Be aware that this will use channel B in the controller for
 776           streaming data, this must not conflict with other AC97C drivers.
 777
 778           If unsure, say N.
 779
 780           To compile this driver as a module, choose M here: the module will
 781           be called atmel-wm97xx.
 782
 783 config TOUCHSCREEN_WM97XX_MAINSTONE
 784         tristate "WM97xx Mainstone/Palm accelerated touch"
 785         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 786         help
 787           Say Y here for support for streaming mode with WM97xx touchscreens
 788           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 789
 790           If unsure, say N.
 791
 792           To compile this driver as a module, choose M here: the
 793           module will be called mainstone-wm97xx.
 794
 795 config TOUCHSCREEN_WM97XX_ZYLONITE
 796         tristate "Zylonite accelerated touch"
 797         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 798         select TOUCHSCREEN_WM9713
 799         help
 800           Say Y here for support for streaming mode with the touchscreen
 801           on Zylonite systems.
 802
 803           If unsure, say N.
 804
 805           To compile this driver as a module, choose M here: the
 806           module will be called zylonite-wm97xx.
 807
 808 config TOUCHSCREEN_USB_COMPOSITE
 809         tristate "USB Touchscreen Driver"
 810         depends on USB_ARCH_HAS_HCD
 811         select USB
 812         help
 813           USB Touchscreen driver for:
 814           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 815           - PanJit TouchSet USB
 816           - 3M MicroTouch USB (EX II series)
 817           - ITM
 818           - some other eTurboTouch
 819           - Gunze AHL61
 820           - DMC TSC-10/25
 821           - IRTOUCHSYSTEMS/UNITOP
 822           - IdealTEK URTC1000
 823           - GoTop Super_Q2/GogoPen/PenPower tablets
 824           - JASTEC USB Touch Controller/DigiTech DTR-02U
 825           - Zytronic controllers
 826           - Elo TouchSystems 2700 IntelliTouch
 827           - EasyTouch USB Touch Controller from Data Modul
 828           - e2i (Mimo monitors)
 829
 830           Have a look at <http://linux.chapter7.ch/touchkit/> for
 831           a usage description and the required user-space stuff.
 832
 833           To compile this driver as a module, choose M here: the
 834           module will be called usbtouchscreen.
 835
 836 config TOUCHSCREEN_MX25
 837         tristate "Freescale i.MX25 touchscreen input driver"
 838         depends on MFD_MX25_TSADC
 839         help
 840           Enable support for touchscreen connected to your i.MX25.
 841
 842           To compile this driver as a module, choose M here: the
 843           module will be called fsl-imx25-tcq.
 844
 845 config TOUCHSCREEN_MC13783
 846         tristate "Freescale MC13783 touchscreen input driver"
 847         depends on MFD_MC13XXX
 848         help
 849           Say Y here if you have an Freescale MC13783 PMIC on your
 850           board and want to use its touchscreen
 851
 852           If unsure, say N.
 853
 854           To compile this driver as a module, choose M here: the
 855           module will be called mc13783_ts.
 856
 857 config TOUCHSCREEN_USB_EGALAX
 858         default y
 859         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 860         depends on TOUCHSCREEN_USB_COMPOSITE
 861
 862 config TOUCHSCREEN_USB_PANJIT
 863         default y
 864         bool "PanJit device support" if EXPERT
 865         depends on TOUCHSCREEN_USB_COMPOSITE
 866
 867 config TOUCHSCREEN_USB_3M
 868         default y
 869         bool "3M/Microtouch EX II series device support" if EXPERT
 870         depends on TOUCHSCREEN_USB_COMPOSITE
 871
 872 config TOUCHSCREEN_USB_ITM
 873         default y
 874         bool "ITM device support" if EXPERT
 875         depends on TOUCHSCREEN_USB_COMPOSITE
 876
 877 config TOUCHSCREEN_USB_ETURBO
 878         default y
 879         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 880         depends on TOUCHSCREEN_USB_COMPOSITE
 881
 882 config TOUCHSCREEN_USB_GUNZE
 883         default y
 884         bool "Gunze AHL61 device support" if EXPERT
 885         depends on TOUCHSCREEN_USB_COMPOSITE
 886
 887 config TOUCHSCREEN_USB_DMC_TSC10
 888         default y
 889         bool "DMC TSC-10/25 device support" if EXPERT
 890         depends on TOUCHSCREEN_USB_COMPOSITE
 891
 892 config TOUCHSCREEN_USB_IRTOUCH
 893         default y
 894         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 895         depends on TOUCHSCREEN_USB_COMPOSITE
 896
 897 config TOUCHSCREEN_USB_IDEALTEK
 898         default y
 899         bool "IdealTEK URTC1000 device support" if EXPERT
 900         depends on TOUCHSCREEN_USB_COMPOSITE
 901
 902 config TOUCHSCREEN_USB_GENERAL_TOUCH
 903         default y
 904         bool "GeneralTouch Touchscreen device support" if EXPERT
 905         depends on TOUCHSCREEN_USB_COMPOSITE
 906
 907 config TOUCHSCREEN_USB_GOTOP
 908         default y
 909         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 910         depends on TOUCHSCREEN_USB_COMPOSITE
 911
 912 config TOUCHSCREEN_USB_JASTEC
 913         default y
 914         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 915         depends on TOUCHSCREEN_USB_COMPOSITE
 916
 917 config TOUCHSCREEN_USB_ELO
 918         default y
 919         bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 920         depends on TOUCHSCREEN_USB_COMPOSITE
 921
 922 config TOUCHSCREEN_USB_E2I
 923         default y
 924         bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 925         depends on TOUCHSCREEN_USB_COMPOSITE
 926
 927 config TOUCHSCREEN_USB_ZYTRONIC
 928         default y
 929         bool "Zytronic controller" if EXPERT
 930         depends on TOUCHSCREEN_USB_COMPOSITE
 931
 932 config TOUCHSCREEN_USB_ETT_TC45USB
 933         default y
 934         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 935         depends on TOUCHSCREEN_USB_COMPOSITE
 936
 937 config TOUCHSCREEN_USB_NEXIO
 938         default y
 939         bool "NEXIO/iNexio device support" if EXPERT
 940         depends on TOUCHSCREEN_USB_COMPOSITE
 941
 942 config TOUCHSCREEN_USB_EASYTOUCH
 943         default y
 944         bool "EasyTouch USB Touch controller device support" if EMBEDDED
 945         depends on TOUCHSCREEN_USB_COMPOSITE
 946         help
 947           Say Y here if you have an EasyTouch USB Touch controller.
 948           If unsure, say N.
 949
 950 config TOUCHSCREEN_TOUCHIT213
 951         tristate "Sahara TouchIT-213 touchscreen"
 952         select SERIO
 953         help
 954           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 955
 956           If unsure, say N.
 957
 958           To compile this driver as a module, choose M here: the
 959           module will be called touchit213.
 960
 961 config TOUCHSCREEN_TS4800
 962         tristate "TS-4800 touchscreen"
 963         depends on HAS_IOMEM && OF
 964         depends on SOC_IMX51 || COMPILE_TEST
 965         select MFD_SYSCON
 966         select INPUT_POLLDEV
 967         help
 968           Say Y here if you have a touchscreen on a TS-4800 board.
 969
 970           On TS-4800, the touchscreen is not handled directly by Linux but by
 971           a companion FPGA.
 972
 973           If unsure, say N.
 974
 975           To compile this driver as a module, choose M here: the
 976           module will be called ts4800_ts.
 977
 978 config TOUCHSCREEN_TSC_SERIO
 979         tristate "TSC-10/25/40 serial touchscreen support"
 980         select SERIO
 981         help
 982           Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 983           to your system.
 984
 985           If unsure, say N.
 986
 987           To compile this driver as a module, choose M here: the
 988           module will be called tsc40.
 989
 990 config TOUCHSCREEN_TSC200X_CORE
 991         tristate
 992
 993 config TOUCHSCREEN_TSC2004
 994         tristate "TSC2004 based touchscreens"
 995         depends on I2C
 996         select REGMAP_I2C
 997         select TOUCHSCREEN_TSC200X_CORE
 998         help
 999           Say Y here if you have a TSC2004 based touchscreen.
1000
1001           If unsure, say N.
1002
1003           To compile this driver as a module, choose M here: the
1004           module will be called tsc2004.
1005
1006 config TOUCHSCREEN_TSC2005
1007         tristate "TSC2005 based touchscreens"
1008         depends on SPI_MASTER
1009         select REGMAP_SPI
1010         select TOUCHSCREEN_TSC200X_CORE
1011         help
1012           Say Y here if you have a TSC2005 based touchscreen.
1013
1014           If unsure, say N.
1015
1016           To compile this driver as a module, choose M here: the
1017           module will be called tsc2005.
1018
1019 config TOUCHSCREEN_TSC2007
1020         tristate "TSC2007 based touchscreens"
1021         depends on I2C
1022         help
1023           Say Y here if you have a TSC2007 based touchscreen.
1024
1025           If unsure, say N.
1026
1027           To compile this driver as a module, choose M here: the
1028           module will be called tsc2007.
1029
1030 config TOUCHSCREEN_W90X900
1031         tristate "W90P910 touchscreen driver"
1032         depends on ARCH_W90X900
1033         help
1034           Say Y here if you have a W90P910 based touchscreen.
1035
1036           To compile this driver as a module, choose M here: the
1037           module will be called w90p910_ts.
1038
1039 config TOUCHSCREEN_PCAP
1040         tristate "Motorola PCAP touchscreen"
1041         depends on EZX_PCAP
1042         help
1043           Say Y here if you have a Motorola EZX telephone and
1044           want to enable support for the built-in touchscreen.
1045
1046           To compile this driver as a module, choose M here: the
1047           module will be called pcap_ts.
1048
1049 config TOUCHSCREEN_RM_TS
1050         tristate "Raydium I2C Touchscreen"
1051         depends on I2C
1052         depends on GPIOLIB || COMPILE_TEST
1053         help
1054           Say Y here if you have Raydium series I2C touchscreen,
1055           such as RM32380, connected to your system.
1056
1057           If unsure, say N.
1058
1059           To compile this driver as a module, choose M here: the
1060           module will be called raydium_i2c_ts.
1061
1062 config TOUCHSCREEN_ST1232
1063         tristate "Sitronix ST1232 touchscreen controllers"
1064         depends on I2C
1065         help
1066           Say Y here if you want to support Sitronix ST1232
1067           touchscreen controller.
1068
1069           If unsure, say N.
1070
1071           To compile this driver as a module, choose M here: the
1072           module will be called st1232_ts.
1073
1074 config TOUCHSCREEN_STMPE
1075         tristate "STMicroelectronics STMPE touchscreens"
1076         depends on MFD_STMPE
1077         depends on (OF || COMPILE_TEST)
1078         help
1079           Say Y here if you want support for STMicroelectronics
1080           STMPE touchscreen controllers.
1081
1082           To compile this driver as a module, choose M here: the
1083           module will be called stmpe-ts.
1084
1085 config TOUCHSCREEN_SUN4I
1086         tristate "Allwinner sun4i resistive touchscreen controller support"
1087         depends on ARCH_SUNXI || COMPILE_TEST
1088         depends on HWMON
1089         depends on THERMAL || !THERMAL_OF
1090         help
1091           This selects support for the resistive touchscreen controller
1092           found on Allwinner sunxi SoCs.
1093
1094           To compile this driver as a module, choose M here: the
1095           module will be called sun4i-ts.
1096
1097 config TOUCHSCREEN_SUR40
1098         tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1099         depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1100         depends on VIDEO_V4L2
1101         select INPUT_POLLDEV
1102         select VIDEOBUF2_DMA_SG
1103         help
1104           Say Y here if you want support for the Samsung SUR40 touchscreen
1105           (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1106
1107           To compile this driver as a module, choose M here: the
1108           module will be called sur40.
1109
1110 config TOUCHSCREEN_SURFACE3_SPI
1111         tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1112         depends on SPI
1113         depends on GPIOLIB || COMPILE_TEST
1114         help
1115           Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1116           controller chip as found on the Surface 3 in your system.
1117
1118           If unsure, say N.
1119
1120           To compile this driver as a module, choose M here: the
1121           module will be called surface3_spi.
1122
1123 config TOUCHSCREEN_SX8654
1124         tristate "Semtech SX8654 touchscreen"
1125         depends on I2C
1126         help
1127           Say Y here if you have a Semtech SX8654 touchscreen controller.
1128
1129           If unsure, say N
1130
1131           To compile this driver as a module, choose M here: the
1132           module will be called sx8654.
1133
1134 config TOUCHSCREEN_TPS6507X
1135         tristate "TPS6507x based touchscreens"
1136         depends on I2C
1137         select INPUT_POLLDEV
1138         help
1139           Say Y here if you have a TPS6507x based touchscreen
1140           controller.
1141
1142           If unsure, say N.
1143
1144           To compile this driver as a module, choose M here: the
1145           module will be called tps6507x_ts.
1146
1147 config TOUCHSCREEN_ZFORCE
1148         tristate "Neonode zForce infrared touchscreens"
1149         depends on I2C
1150         depends on GPIOLIB || COMPILE_TEST
1151         help
1152           Say Y here if you have a touchscreen using the zforce
1153           infraread technology from Neonode.
1154
1155           If unsure, say N.
1156
1157           To compile this driver as a module, choose M here: the
1158           module will be called zforce_ts.
1159
1160 config TOUCHSCREEN_COLIBRI_VF50
1161         tristate "Toradex Colibri on board touchscreen driver"
1162         depends on IIO && VF610_ADC
1163         depends on GPIOLIB || COMPILE_TEST
1164         help
1165           Say Y here if you have a Colibri VF50 and plan to use
1166           the on-board provided 4-wire touchscreen driver.
1167
1168           If unsure, say N.
1169
1170           To compile this driver as a module, choose M here: the
1171           module will be called colibri_vf50_ts.
1172
1173 config TOUCHSCREEN_ROHM_BU21023
1174         tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1175         depends on I2C
1176         help
1177           Say Y here if you have a touchscreen using ROHM BU21023/24.
1178
1179           If unsure, say N.
1180
1181           To compile this driver as a module, choose M here: the
1182           module will be called bu21023_ts.
1183
1184 endif